| /* |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| //Package adaptercoreonu provides the utility for onu devices, flows and statistics |
| package adaptercoreonu |
| |
| import ( |
| "context" |
| "encoding/binary" |
| "errors" |
| "strconv" |
| "sync" |
| "time" |
| |
| "github.com/looplab/fsm" |
| "github.com/opencord/omci-lib-go" |
| me "github.com/opencord/omci-lib-go/generated" |
| "github.com/opencord/voltha-lib-go/v3/pkg/log" |
| of "github.com/opencord/voltha-protos/v3/go/openflow_13" |
| ) |
| |
| const ( |
| // internal predefined values |
| cDefaultDownstreamMode = 0 |
| cDefaultTpid = 0x8100 |
| cMaxAllowedFlows = 12 //which might be under discussion, for the moment connected to limit of VLAN's within VTFD |
| ) |
| |
| const ( |
| // bit mask offsets for EVTOCD VlanTaggingOperationTable related to 32 bits (4 bytes) |
| cFilterPrioOffset = 28 |
| cFilterVidOffset = 15 |
| cFilterTpidOffset = 12 |
| cFilterEtherTypeOffset = 0 |
| cTreatTTROffset = 30 |
| cTreatPrioOffset = 16 |
| cTreatVidOffset = 3 |
| cTreatTpidOffset = 0 |
| ) |
| const ( |
| // byte offsets for EVTOCD VlanTaggingOperationTable related to overall 16 byte size with slice byte 0 as first Byte (MSB) |
| cFilterOuterOffset = 0 |
| cFilterInnerOffset = 4 |
| cTreatOuterOffset = 8 |
| cTreatInnerOffset = 12 |
| ) |
| const ( |
| // basic values used within EVTOCD VlanTaggingOperationTable in respect to their bitfields |
| cPrioIgnoreTag uint32 = 15 |
| cPrioDefaultFilter uint32 = 14 |
| cPrioDoNotFilter uint32 = 8 |
| cDoNotFilterVid uint32 = 4096 |
| cDoNotFilterTPID uint32 = 0 |
| cDoNotFilterEtherType uint32 = 0 |
| cDoNotAddPrio uint32 = 15 |
| cCopyPrioFromInner uint32 = 8 |
| //cDontCarePrio uint32 = 0 |
| cDontCareVid uint32 = 0 |
| cDontCareTpid uint32 = 0 |
| cSetOutputTpidCopyDei uint32 = 4 |
| ) |
| |
| const ( |
| // events of config PON ANI port FSM |
| vlanEvStart = "vlanEvStart" |
| vlanEvWaitTechProf = "vlanEvWaitTechProf" |
| vlanEvContinueConfig = "vlanEvContinueConfig" |
| vlanEvStartConfig = "vlanEvStartConfig" |
| vlanEvRxConfigVtfd = "vlanEvRxConfigVtfd" |
| vlanEvRxConfigEvtocd = "vlanEvRxConfigEvtocd" |
| vlanEvIncrFlowConfig = "vlanEvIncrFlowConfig" |
| //vlanEvCleanupConfig = "vlanEvCleanupConfig" |
| //vlanEvRxCleanVtfd = "vlanEvRxCleanVtfd" |
| //vlanEvRxCleanEvtocd = "vlanEvRxCleanEvtocd" |
| //vlanEvTimeoutSimple = "vlanEvTimeoutSimple" |
| //vlanEvTimeoutMids = "vlanEvTimeoutMids" |
| vlanEvReset = "vlanEvReset" |
| vlanEvRestart = "vlanEvRestart" |
| ) |
| const ( |
| // states of config PON ANI port FSM |
| vlanStDisabled = "vlanStDisabled" |
| vlanStStarting = "vlanStStarting" |
| vlanStWaitingTechProf = "vlanStWaitingTechProf" |
| vlanStConfigVtfd = "vlanStConfigVtfd" |
| vlanStConfigEvtocd = "vlanStConfigEvtocd" |
| vlanStConfigDone = "vlanStConfigDone" |
| vlanStConfigIncrFlow = "vlanStConfigIncrFlow" |
| vlanStCleanEvtocd = "vlanStCleanEvtocd" |
| vlanStCleanVtfd = "vlanStCleanVtfd" |
| vlanStCleanupDone = "vlanStCleanupDone" |
| vlanStResetting = "vlanStResetting" |
| ) |
| |
| //UniVlanConfigFsm defines the structure for the state machine to config the PON ANI ports of ONU UNI ports via OMCI |
| type UniVlanConfigFsm struct { |
| pDeviceHandler *deviceHandler |
| pOmciCC *omciCC |
| pOnuUniPort *onuUniPort |
| pUniTechProf *onuUniTechProf |
| pOnuDB *onuDeviceDB |
| techProfileID uint16 |
| requestEvent OnuDeviceEvent |
| omciMIdsResponseReceived chan bool //seperate channel needed for checking multiInstance OMCI message responses |
| pAdaptFsm *AdapterFsm |
| acceptIncrementalEvtoOption bool |
| mutexFlowParams sync.Mutex |
| uniFlowParamsSlice []uniVlanFlowParams |
| numUniFlows uint8 // expected number of flows should be less than 12 |
| configuredUniFlow uint8 |
| numVlanFilterEntries uint8 |
| vlanFilterList [12]uint16 |
| vtfdID uint16 |
| evtocdID uint16 |
| } |
| |
| //NewUniVlanConfigFsm is the 'constructor' for the state machine to config the PON ANI ports of ONU UNI ports via OMCI |
| func NewUniVlanConfigFsm(apDeviceHandler *deviceHandler, apDevOmciCC *omciCC, apUniPort *onuUniPort, apUniTechProf *onuUniTechProf, |
| apOnuDB *onuDeviceDB, aTechProfileID uint16, aRequestEvent OnuDeviceEvent, aName string, |
| aDeviceID string, aCommChannel chan Message, |
| aAcceptIncrementalEvto bool, aMatchVlan uint16, aSetVlan uint16, aSetPcp uint8) *UniVlanConfigFsm { |
| instFsm := &UniVlanConfigFsm{ |
| pDeviceHandler: apDeviceHandler, |
| pOmciCC: apDevOmciCC, |
| pOnuUniPort: apUniPort, |
| pUniTechProf: apUniTechProf, |
| pOnuDB: apOnuDB, |
| techProfileID: aTechProfileID, |
| requestEvent: aRequestEvent, |
| acceptIncrementalEvtoOption: aAcceptIncrementalEvto, |
| numUniFlows: 0, |
| configuredUniFlow: 0, |
| } |
| |
| instFsm.pAdaptFsm = NewAdapterFsm(aName, aDeviceID, aCommChannel) |
| if instFsm.pAdaptFsm == nil { |
| logger.Errorw("UniVlanConfigFsm's AdapterFsm could not be instantiated!!", log.Fields{ |
| "device-id": aDeviceID}) |
| return nil |
| } |
| instFsm.pAdaptFsm.pFsm = fsm.NewFSM( |
| vlanStDisabled, |
| fsm.Events{ |
| {Name: vlanEvStart, Src: []string{vlanStDisabled}, Dst: vlanStStarting}, |
| {Name: vlanEvWaitTechProf, Src: []string{vlanStStarting}, Dst: vlanStWaitingTechProf}, |
| {Name: vlanEvContinueConfig, Src: []string{vlanStWaitingTechProf}, Dst: vlanStConfigVtfd}, |
| {Name: vlanEvStartConfig, Src: []string{vlanStStarting}, Dst: vlanStConfigVtfd}, |
| {Name: vlanEvRxConfigVtfd, Src: []string{vlanStConfigVtfd}, Dst: vlanStConfigEvtocd}, |
| {Name: vlanEvRxConfigEvtocd, Src: []string{vlanStConfigEvtocd, vlanStConfigIncrFlow}, |
| Dst: vlanStConfigDone}, |
| {Name: vlanEvIncrFlowConfig, Src: []string{vlanStConfigDone}, Dst: vlanStConfigIncrFlow}, |
| /* |
| {Name: vlanEvTimeoutSimple, Src: []string{ |
| vlanStCreatingDot1PMapper, vlanStCreatingMBPCD, vlanStSettingTconts, vlanStSettingDot1PMapper}, Dst: vlanStStarting}, |
| {Name: vlanEvTimeoutMids, Src: []string{ |
| vlanStCreatingGemNCTPs, vlanStCreatingGemIWs, vlanStSettingPQs}, Dst: vlanStStarting}, |
| */ |
| // exceptional treatment for all states except vlanStResetting |
| {Name: vlanEvReset, Src: []string{vlanStStarting, vlanStWaitingTechProf, |
| vlanStConfigVtfd, vlanStConfigEvtocd, vlanStConfigDone, vlanStConfigIncrFlow, |
| vlanStCleanEvtocd, vlanStCleanVtfd, vlanStCleanupDone}, |
| Dst: vlanStResetting}, |
| // the only way to get to resource-cleared disabled state again is via "resseting" |
| {Name: vlanEvRestart, Src: []string{vlanStResetting}, Dst: vlanStDisabled}, |
| }, |
| fsm.Callbacks{ |
| "enter_state": func(e *fsm.Event) { instFsm.pAdaptFsm.logFsmStateChange(e) }, |
| ("enter_" + vlanStStarting): func(e *fsm.Event) { instFsm.enterConfigStarting(e) }, |
| ("enter_" + vlanStConfigVtfd): func(e *fsm.Event) { instFsm.enterConfigVtfd(e) }, |
| ("enter_" + vlanStConfigEvtocd): func(e *fsm.Event) { instFsm.enterConfigEvtocd(e) }, |
| ("enter_" + vlanStConfigDone): func(e *fsm.Event) { instFsm.enterVlanConfigDone(e) }, |
| ("enter_" + vlanStConfigIncrFlow): func(e *fsm.Event) { instFsm.enterConfigIncrFlow(e) }, |
| ("enter_" + vlanStCleanVtfd): func(e *fsm.Event) { instFsm.enterCleanVtfd(e) }, |
| ("enter_" + vlanStCleanEvtocd): func(e *fsm.Event) { instFsm.enterCleanEvtocd(e) }, |
| ("enter_" + vlanStCleanupDone): func(e *fsm.Event) { instFsm.enterVlanCleanupDone(e) }, |
| ("enter_" + vlanStResetting): func(e *fsm.Event) { instFsm.enterResetting(e) }, |
| ("enter_" + vlanStDisabled): func(e *fsm.Event) { instFsm.enterDisabled(e) }, |
| }, |
| ) |
| if instFsm.pAdaptFsm.pFsm == nil { |
| logger.Errorw("UniVlanConfigFsm's Base FSM could not be instantiated!!", log.Fields{ |
| "device-id": aDeviceID}) |
| return nil |
| } |
| |
| _ = instFsm.SetUniFlowParams(aTechProfileID, aMatchVlan, aSetVlan, aSetPcp) |
| |
| logger.Infow("UniVlanConfigFsm created", log.Fields{"device-id": aDeviceID, |
| "accIncrEvto": instFsm.acceptIncrementalEvtoOption}) |
| return instFsm |
| } |
| |
| //SetUniFlowParams verifies on existence of flow parameters to be configured |
| // and appends a new flow if there is space |
| func (oFsm *UniVlanConfigFsm) SetUniFlowParams(aTpID uint16, aMatchVlan uint16, aSetVlan uint16, aSetPcp uint8) error { |
| loFlowParams := uniVlanFlowParams{ |
| TpID: aTpID, |
| MatchVid: uint32(aMatchVlan), |
| SetVid: uint32(aSetVlan), |
| SetPcp: uint32(aSetPcp), |
| } |
| // some automatic adjustments on the filter/treat parameters as not specifically configured/ensured by flow configuration parameters |
| loFlowParams.TagsToRemove = 1 //one tag to remove as default setting |
| loFlowParams.MatchPcp = cPrioDoNotFilter // do not Filter on prio as default |
| |
| if loFlowParams.SetVid == uint32(of.OfpVlanId_OFPVID_PRESENT) { |
| //then matchVlan is don't care and should be overwritten to 'transparent' here to avoid unneeded multiple flow entries |
| loFlowParams.MatchVid = uint32(of.OfpVlanId_OFPVID_PRESENT) |
| //TODO!!: maybe be needed to be re-checked at flow deletion (but assume all flows are always deleted togehther) |
| } else { |
| if !oFsm.acceptIncrementalEvtoOption { |
| //then matchVlan is don't care and should be overwritten to 'transparent' here to avoid unneeded multiple flow entries |
| loFlowParams.MatchVid = uint32(of.OfpVlanId_OFPVID_PRESENT) |
| } |
| } |
| |
| if loFlowParams.MatchVid == uint32(of.OfpVlanId_OFPVID_PRESENT) { |
| // no prio/vid filtering requested |
| loFlowParams.TagsToRemove = 0 //no tag pop action |
| loFlowParams.MatchPcp = cPrioIgnoreTag // no vlan tag filtering |
| if loFlowParams.SetPcp == cCopyPrioFromInner { |
| //in case of no filtering and configured PrioCopy ensure default prio setting to 0 |
| // which is required for stacking of untagged, but obviously also ensures prio setting for prio/singletagged |
| // might collide with NoMatchVid/CopyPrio(/setVid) setting |
| // this was some precondition setting taken over from py adapter .. |
| loFlowParams.SetPcp = 0 |
| } |
| } |
| flowEntryMatch := false |
| //mutex protection is required for possible concurrent access to FSM members |
| oFsm.mutexFlowParams.Lock() |
| defer oFsm.mutexFlowParams.Unlock() |
| for _, storedUniFlowParams := range oFsm.uniFlowParamsSlice { |
| if storedUniFlowParams == loFlowParams { |
| flowEntryMatch = true |
| break |
| } |
| } |
| if flowEntryMatch { |
| logger.Debugw("UniVlanConfigFsm flow setting - flow already exists (ignore)", log.Fields{ |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| } else { |
| if oFsm.numUniFlows < cMaxAllowedFlows { |
| oFsm.uniFlowParamsSlice = append(oFsm.uniFlowParamsSlice, loFlowParams) |
| oFsm.numUniFlows++ |
| logger.Debugw("UniVlanConfigFsm flow added", log.Fields{ |
| "MatchVid": strconv.FormatInt(int64(loFlowParams.MatchVid), 16), |
| "SetVid": strconv.FormatInt(int64(loFlowParams.SetVid), 16), |
| "SetPcp": loFlowParams.SetPcp, "numberofFlows": oFsm.numUniFlows, |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| |
| //permanently store flow config for reconcile case |
| |
| if err := oFsm.pDeviceHandler.storePersUniFlowConfig(oFsm.pOnuUniPort.uniID, &oFsm.uniFlowParamsSlice); err != nil { |
| logger.Errorw(err.Error(), log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| return err |
| } |
| |
| pConfigVlanStateBaseFsm := oFsm.pAdaptFsm.pFsm |
| if pConfigVlanStateBaseFsm.Is(vlanStConfigDone) { |
| //have to re-trigger the FSM to proceed with outstanding incremental flow configuration |
| // calling some FSM event must be decoupled |
| go func(a_pBaseFsm *fsm.FSM) { |
| _ = a_pBaseFsm.Event(vlanEvIncrFlowConfig) |
| }(pConfigVlanStateBaseFsm) |
| } // in all other states a new entry will be automatically considered later in that state or |
| // ignored as not anymore relevant |
| } else { |
| logger.Errorw("UniVlanConfigFsm flow limit exceeded", log.Fields{ |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| return errors.New(" UniVlanConfigFsm flow limit exceeded") |
| } |
| } |
| return nil |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterConfigStarting(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm start", log.Fields{"in state": e.FSM.Current(), |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| |
| // this FSM is not intended for re-start, needs always new creation for a new run |
| oFsm.omciMIdsResponseReceived = make(chan bool) |
| // start go routine for processing of LockState messages |
| go oFsm.processOmciVlanMessages() |
| //let the state machine run forward from here directly |
| pConfigVlanStateAFsm := oFsm.pAdaptFsm |
| if pConfigVlanStateAFsm != nil { |
| // obviously calling some FSM event here directly does not work - so trying to decouple it ... |
| go func(a_pAFsm *AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.pFsm != nil { |
| //stick to pythonAdapter numbering scheme |
| oFsm.vtfdID = macBridgePortAniEID + oFsm.pOnuUniPort.entityID + oFsm.techProfileID |
| //cmp also usage in EVTOCDE create in omci_cc |
| oFsm.evtocdID = macBridgeServiceProfileEID + uint16(oFsm.pOnuUniPort.macBpNo) |
| |
| if oFsm.pUniTechProf.getTechProfileDone(oFsm.pOnuUniPort.uniID, oFsm.techProfileID) { |
| // let the vlan processing begin |
| _ = a_pAFsm.pFsm.Event(vlanEvStartConfig) |
| } else { |
| // set to waiting for Techprofile |
| _ = a_pAFsm.pFsm.Event(vlanEvWaitTechProf) |
| } |
| } |
| }(pConfigVlanStateAFsm) |
| } |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterConfigVtfd(e *fsm.Event) { |
| //mutex protection is required for possible concurrent access to FSM members |
| oFsm.mutexFlowParams.Lock() |
| if oFsm.uniFlowParamsSlice[0].SetVid == uint32(of.OfpVlanId_OFPVID_PRESENT) { |
| // meaning transparent setup - no specific VTFD setting required |
| oFsm.mutexFlowParams.Unlock() |
| logger.Debugw("UniVlanConfigFsm: no VTFD config required", log.Fields{ |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| // let the FSM proceed ... (from within this state all internal pointers may be expected to be correct) |
| // obviously calling some FSM event here directly does not work - so trying to decouple it ... |
| pConfigVlanStateAFsm := oFsm.pAdaptFsm |
| go func(a_pAFsm *AdapterFsm) { |
| _ = a_pAFsm.pFsm.Event(vlanEvRxConfigVtfd) |
| }(pConfigVlanStateAFsm) |
| } else { |
| logger.Debugw("UniVlanConfigFsm create VTFD", log.Fields{ |
| "EntitytId": strconv.FormatInt(int64(oFsm.vtfdID), 16), |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| oFsm.vlanFilterList[0] = uint16(oFsm.uniFlowParamsSlice[0].SetVid) // setVid is assumed to be masked already by the caller to 12 bit |
| oFsm.mutexFlowParams.Unlock() |
| vtfdFilterList := make([]uint16, 12) //needed for parameter serialization |
| vtfdFilterList[0] = oFsm.vlanFilterList[0] |
| oFsm.numVlanFilterEntries = 1 |
| meParams := me.ParamData{ |
| EntityID: oFsm.vtfdID, |
| Attributes: me.AttributeValueMap{ |
| "VlanFilterList": vtfdFilterList, //omci lib wants a slice for serialization |
| "ForwardOperation": uint8(0x10), //VID investigation |
| "NumberOfEntries": oFsm.numVlanFilterEntries, |
| }, |
| } |
| logger.Debugw("UniVlanConfigFsm sendcreate VTFD", log.Fields{ |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| meInstance := oFsm.pOmciCC.sendCreateVtfdVar(context.TODO(), ConstDefaultOmciTimeout, true, |
| oFsm.pAdaptFsm.commChan, meParams) |
| //accept also nil as (error) return value for writing to LastTx |
| // - this avoids misinterpretation of new received OMCI messages |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // send shall return (dual format) error code that can be used here for immediate error treatment |
| // (relevant to all used sendXX() methods in this (and other) FSM's) |
| oFsm.pOmciCC.pLastTxMeInstance = meInstance |
| } |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterConfigEvtocd(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm - start config EVTOCD loop", log.Fields{ |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| go oFsm.performConfigEvtocdEntries(0) |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterVlanConfigDone(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm - checking on more flows", log.Fields{ |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| oFsm.configuredUniFlow++ // one (more) flow configured |
| if oFsm.numUniFlows > oFsm.configuredUniFlow { |
| //some further flows are to be configured |
| // calling some FSM event must be decoupled |
| pConfigVlanStateBaseFsm := oFsm.pAdaptFsm.pFsm |
| go func(a_pBaseFsm *fsm.FSM) { |
| _ = a_pBaseFsm.Event(vlanEvIncrFlowConfig) |
| }(pConfigVlanStateBaseFsm) |
| return |
| } |
| |
| logger.Debugw("UniVlanConfigFsm - VLAN config done: send dh event notification", log.Fields{ |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| // it might appear that some flows are requested also after 'flowPushed' event has been generated ... |
| // state transition notification is checked in deviceHandler |
| if oFsm.pDeviceHandler != nil { |
| oFsm.pDeviceHandler.deviceProcStatusUpdate(oFsm.requestEvent) |
| } |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterConfigIncrFlow(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm - start config further incremental flow", log.Fields{ |
| "in state": e.FSM.Current(), "recent flow-number": (oFsm.configuredUniFlow), |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| oFsm.mutexFlowParams.Lock() |
| |
| if oFsm.uniFlowParamsSlice[oFsm.configuredUniFlow].SetVid == uint32(of.OfpVlanId_OFPVID_PRESENT) { |
| // meaning transparent setup - no specific VTFD setting required |
| oFsm.mutexFlowParams.Unlock() |
| logger.Debugw("UniVlanConfigFsm: no VTFD config required", log.Fields{ |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| } else { |
| if oFsm.numVlanFilterEntries == 0 { |
| //no VTFD yet created |
| logger.Debugw("UniVlanConfigFsm create VTFD", log.Fields{ |
| "EntitytId": strconv.FormatInt(int64(oFsm.vtfdID), 16), |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| oFsm.vlanFilterList[0] = uint16(oFsm.uniFlowParamsSlice[oFsm.configuredUniFlow].SetVid) // setVid is assumed to be masked already by the caller to 12 bit |
| oFsm.mutexFlowParams.Unlock() |
| vtfdFilterList := make([]uint16, 12) //needed for parameter serialization |
| vtfdFilterList[0] = oFsm.vlanFilterList[0] |
| oFsm.numVlanFilterEntries = 1 |
| meParams := me.ParamData{ |
| EntityID: oFsm.vtfdID, |
| Attributes: me.AttributeValueMap{ |
| "VlanFilterList": vtfdFilterList, |
| "ForwardOperation": uint8(0x10), //VID investigation |
| "NumberOfEntries": oFsm.numVlanFilterEntries, |
| }, |
| } |
| meInstance := oFsm.pOmciCC.sendCreateVtfdVar(context.TODO(), ConstDefaultOmciTimeout, true, |
| oFsm.pAdaptFsm.commChan, meParams) |
| //accept also nil as (error) return value for writing to LastTx |
| // - this avoids misinterpretation of new received OMCI messages |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // send shall return (dual format) error code that can be used here for immediate error treatment |
| // (relevant to all used sendXX() methods in this (and other) FSM's) |
| oFsm.pOmciCC.pLastTxMeInstance = meInstance |
| } else { |
| //VTFD already exists - just modify by 'set' |
| //TODO!!: but only if the VID is not already present, skipped by now to test basic working |
| logger.Debugw("UniVlanConfigFsm set VTFD", log.Fields{ |
| "EntitytId": strconv.FormatInt(int64(oFsm.vtfdID), 16), |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| // setVid is assumed to be masked already by the caller to 12 bit |
| oFsm.vlanFilterList[oFsm.numVlanFilterEntries] = |
| uint16(oFsm.uniFlowParamsSlice[oFsm.configuredUniFlow].SetVid) |
| oFsm.mutexFlowParams.Unlock() |
| vtfdFilterList := make([]uint16, 12) //needed for parameter serialization |
| for i := uint8(0); i <= oFsm.numVlanFilterEntries; i++ { |
| vtfdFilterList[i] = oFsm.vlanFilterList[i] |
| } |
| |
| oFsm.numVlanFilterEntries++ |
| meParams := me.ParamData{ |
| EntityID: oFsm.vtfdID, |
| Attributes: me.AttributeValueMap{ |
| "VlanFilterList": vtfdFilterList, |
| "NumberOfEntries": oFsm.numVlanFilterEntries, |
| }, |
| } |
| meInstance := oFsm.pOmciCC.sendSetVtfdVar(context.TODO(), ConstDefaultOmciTimeout, true, |
| oFsm.pAdaptFsm.commChan, meParams) |
| //accept also nil as (error) return value for writing to LastTx |
| // - this avoids misinterpretation of new received OMCI messages |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // send shall return (dual format) error code that can be used here for immediate error treatment |
| // (relevant to all used sendXX() methods in this (and other) FSM's) |
| oFsm.pOmciCC.pLastTxMeInstance = meInstance |
| } |
| //verify response |
| err := oFsm.waitforOmciResponse() |
| if err != nil { |
| logger.Errorw("VTFD create/set failed, aborting VlanConfig FSM!", |
| log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvReset) |
| return |
| } |
| } |
| go oFsm.performConfigEvtocdEntries(oFsm.configuredUniFlow) |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterCleanVtfd(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm Tx Delete::VTFD", log.Fields{ |
| /*"EntitytId": strconv.FormatInt(int64(oFsm.mapperSP0ID), 16),*/ |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterCleanEvtocd(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm cleanup EVTOCD", log.Fields{ |
| /*"EntitytId": strconv.FormatInt(int64(oFsm.macBPCD0ID), 16), |
| "TPPtr": strconv.FormatInt(int64(oFsm.mapperSP0ID), 16),*/ |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterVlanCleanupDone(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm - VLAN cleanup done", log.Fields{ |
| "in state": e.FSM.Current(), "device-id": oFsm.pAdaptFsm.deviceID}) |
| |
| //let's reset the state machine in order to release all resources now |
| pConfigVlanStateAFsm := oFsm.pAdaptFsm |
| if pConfigVlanStateAFsm != nil { |
| // obviously calling some FSM event here directly does not work - so trying to decouple it ... |
| go func(a_pAFsm *AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.pFsm != nil { |
| _ = a_pAFsm.pFsm.Event(vlanEvReset) |
| } |
| }(pConfigVlanStateAFsm) |
| } |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterResetting(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm resetting", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| |
| pConfigVlanStateAFsm := oFsm.pAdaptFsm |
| if pConfigVlanStateAFsm != nil { |
| // abort running message processing |
| fsmAbortMsg := Message{ |
| Type: TestMsg, |
| Data: TestMessage{ |
| TestMessageVal: AbortMessageProcessing, |
| }, |
| } |
| pConfigVlanStateAFsm.commChan <- fsmAbortMsg |
| |
| //try to restart the FSM to 'disabled', decouple event transfer |
| go func(a_pAFsm *AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.pFsm != nil { |
| _ = a_pAFsm.pFsm.Event(vlanEvRestart) |
| } |
| }(pConfigVlanStateAFsm) |
| } |
| } |
| |
| func (oFsm *UniVlanConfigFsm) enterDisabled(e *fsm.Event) { |
| logger.Debugw("UniVlanConfigFsm enters disabled state", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| if oFsm.pDeviceHandler != nil { |
| //request removal of 'reference' in the Handler (completely clear the FSM) |
| go oFsm.pDeviceHandler.RemoveVlanFilterFsm(oFsm.pOnuUniPort) |
| } |
| } |
| |
| func (oFsm *UniVlanConfigFsm) processOmciVlanMessages() { //ctx context.Context? |
| logger.Debugw("Start UniVlanConfigFsm Msg processing", log.Fields{"for device-id": oFsm.pAdaptFsm.deviceID}) |
| loop: |
| for { |
| // case <-ctx.Done(): |
| // logger.Info("MibSync Msg", log.Fields{"Message handling canceled via context for device-id": oFsm.pAdaptFsm.deviceID}) |
| // break loop |
| message, ok := <-oFsm.pAdaptFsm.commChan |
| if !ok { |
| logger.Info("UniVlanConfigFsm Rx Msg - could not read from channel", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| // but then we have to ensure a restart of the FSM as well - as exceptional procedure |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvReset) |
| break loop |
| } |
| logger.Debugw("UniVlanConfigFsm Rx Msg", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| |
| switch message.Type { |
| case TestMsg: |
| msg, _ := message.Data.(TestMessage) |
| if msg.TestMessageVal == AbortMessageProcessing { |
| logger.Infow("UniVlanConfigFsm abort ProcessMsg", log.Fields{"for device-id": oFsm.pAdaptFsm.deviceID}) |
| break loop |
| } |
| logger.Warnw("UniVlanConfigFsm unknown TestMessage", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID, "MessageVal": msg.TestMessageVal}) |
| case OMCI: |
| msg, _ := message.Data.(OmciMessage) |
| oFsm.handleOmciVlanConfigMessage(msg) |
| default: |
| logger.Warn("UniVlanConfigFsm Rx unknown message", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID, |
| "message.Type": message.Type}) |
| } |
| } |
| logger.Infow("End UniVlanConfigFsm Msg processing", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| } |
| |
| func (oFsm *UniVlanConfigFsm) handleOmciVlanConfigMessage(msg OmciMessage) { |
| logger.Debugw("Rx OMCI UniVlanConfigFsm Msg", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID, |
| "msgType": msg.OmciMsg.MessageType}) |
| |
| switch msg.OmciMsg.MessageType { |
| case omci.CreateResponseType: |
| { |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeCreateResponse) |
| if msgLayer == nil { |
| logger.Error("Omci Msg layer could not be detected for CreateResponse") |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.CreateResponse) |
| if !msgOk { |
| logger.Error("Omci Msg layer could not be assigned for CreateResponse") |
| return |
| } |
| logger.Debugw("CreateResponse Data", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID, "data-fields": msgObj}) |
| if msgObj.Result != me.Success { |
| logger.Errorw("Omci CreateResponse Error - later: drive FSM to abort state ?", log.Fields{"Error": msgObj.Result}) |
| // possibly force FSM into abort or ignore some errors for some messages? store error for mgmt display? |
| return |
| } |
| if msgObj.EntityClass == oFsm.pOmciCC.pLastTxMeInstance.GetClassID() && |
| msgObj.EntityInstance == oFsm.pOmciCC.pLastTxMeInstance.GetEntityID() { |
| // maybe we can use just the same eventName for different state transitions like "forward" |
| // - might be checked, but so far I go for sure and have to inspect the concrete state events ... |
| switch oFsm.pOmciCC.pLastTxMeInstance.GetName() { |
| case "VlanTaggingFilterData": |
| { |
| if oFsm.configuredUniFlow == 0 { |
| // Only if CreateResponse is received from first flow entry - let the FSM proceed ... |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvRxConfigVtfd) |
| } else { // let the MultiEntity config proceed by stopping the wait function |
| oFsm.omciMIdsResponseReceived <- true |
| } |
| } |
| } |
| } |
| } //CreateResponseType |
| case omci.SetResponseType: |
| { |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeSetResponse) |
| if msgLayer == nil { |
| logger.Error("UniVlanConfigFsm - Omci Msg layer could not be detected for SetResponse") |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.SetResponse) |
| if !msgOk { |
| logger.Error("UniVlanConfigFsm - Omci Msg layer could not be assigned for SetResponse") |
| return |
| } |
| logger.Debugw("UniVlanConfigFsm SetResponse Data", log.Fields{"deviceId": oFsm.pAdaptFsm.deviceID, "data-fields": msgObj}) |
| if msgObj.Result != me.Success { |
| logger.Errorw("UniVlanConfigFsm - Omci SetResponse Error - later: drive FSM to abort state ?", log.Fields{"Error": msgObj.Result}) |
| // possibly force FSM into abort or ignore some errors for some messages? store error for mgmt display? |
| return |
| } |
| if msgObj.EntityClass == oFsm.pOmciCC.pLastTxMeInstance.GetClassID() && |
| msgObj.EntityInstance == oFsm.pOmciCC.pLastTxMeInstance.GetEntityID() { |
| switch oFsm.pOmciCC.pLastTxMeInstance.GetName() { |
| case "VlanTaggingFilterData", |
| "ExtendedVlanTaggingOperationConfigurationData": |
| { // let the MultiEntity config proceed by stopping the wait function |
| oFsm.omciMIdsResponseReceived <- true |
| } |
| } |
| } |
| } //SetResponseType |
| default: |
| { |
| logger.Errorw("UniVlanConfigFsm - Rx OMCI unhandled MsgType", log.Fields{"omciMsgType": msg.OmciMsg.MessageType}) |
| return |
| } |
| } |
| } |
| |
| func (oFsm *UniVlanConfigFsm) performConfigEvtocdEntries(aFlowEntryNo uint8) { |
| if aFlowEntryNo == 0 { |
| // EthType set only at first flow element |
| // EVTOCD ME is expected to exist at this point already from MIB-Download (with AssociationType/Pointer) |
| // we need to extend the configuration by EthType definition and, to be sure, downstream 'inverse' mode |
| logger.Debugw("UniVlanConfigFsm Tx Set::EVTOCD", log.Fields{ |
| "EntitytId": strconv.FormatInt(int64(oFsm.evtocdID), 16), |
| "i/oEthType": strconv.FormatInt(int64(cDefaultTpid), 16), |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| meParams := me.ParamData{ |
| EntityID: oFsm.evtocdID, |
| Attributes: me.AttributeValueMap{ |
| "InputTpid": uint16(cDefaultTpid), //could be possibly retrieved from flow config one day, by now just like py-code base |
| "OutputTpid": uint16(cDefaultTpid), //could be possibly retrieved from flow config one day, by now just like py-code base |
| "DownstreamMode": uint8(cDefaultDownstreamMode), |
| }, |
| } |
| meInstance := oFsm.pOmciCC.sendSetEvtocdVar(context.TODO(), ConstDefaultOmciTimeout, true, |
| oFsm.pAdaptFsm.commChan, meParams) |
| //accept also nil as (error) return value for writing to LastTx |
| // - this avoids misinterpretation of new received OMCI messages |
| oFsm.pOmciCC.pLastTxMeInstance = meInstance |
| |
| //verify response |
| err := oFsm.waitforOmciResponse() |
| if err != nil { |
| logger.Errorw("Evtocd set TPID failed, aborting VlanConfig FSM!", |
| log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvReset) |
| return |
| } |
| } //first flow element |
| |
| oFsm.mutexFlowParams.Lock() |
| if oFsm.uniFlowParamsSlice[aFlowEntryNo].SetVid == uint32(of.OfpVlanId_OFPVID_PRESENT) { |
| //transparent transmission required |
| oFsm.mutexFlowParams.Unlock() |
| logger.Debugw("UniVlanConfigFsm Tx Set::EVTOCD single tagged transparent rule", log.Fields{ |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| sliceEvtocdRule := make([]uint8, 16) |
| // fill vlan tagging operation table bit fields using network=bigEndian order and using slice offset 0 as highest 'word' |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cFilterOuterOffset:], |
| cPrioIgnoreTag<<cFilterPrioOffset| // Not an outer-tag rule |
| cDoNotFilterVid<<cFilterVidOffset| // Do not filter on outer vid |
| cDoNotFilterTPID<<cFilterTpidOffset) // Do not filter on outer TPID field |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cFilterInnerOffset:], |
| cPrioDefaultFilter<<cFilterPrioOffset| // default inner-tag rule |
| cDoNotFilterVid<<cFilterVidOffset| // Do not filter on inner vid |
| cDoNotFilterTPID<<cFilterTpidOffset| // Do not filter on inner TPID field |
| cDoNotFilterEtherType<<cFilterEtherTypeOffset) // Do not filter of EtherType |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cTreatOuterOffset:], |
| 0<<cTreatTTROffset| // Do not pop any tags |
| cDoNotAddPrio<<cTreatPrioOffset| // do not add outer tag |
| cDontCareVid<<cTreatVidOffset| // Outer VID don't care |
| cDontCareTpid<<cTreatTpidOffset) // Outer TPID field don't care |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cTreatInnerOffset:], |
| cDoNotAddPrio<<cTreatPrioOffset| // do not add inner tag |
| cDontCareVid<<cTreatVidOffset| // Outer VID don't care |
| cSetOutputTpidCopyDei<<cTreatTpidOffset) // Set TPID = 0x8100 |
| |
| meParams := me.ParamData{ |
| EntityID: oFsm.evtocdID, |
| Attributes: me.AttributeValueMap{ |
| "ReceivedFrameVlanTaggingOperationTable": sliceEvtocdRule, |
| }, |
| } |
| meInstance := oFsm.pOmciCC.sendSetEvtocdVar(context.TODO(), ConstDefaultOmciTimeout, true, |
| oFsm.pAdaptFsm.commChan, meParams) |
| //accept also nil as (error) return value for writing to LastTx |
| // - this avoids misinterpretation of new received OMCI messages |
| oFsm.pOmciCC.pLastTxMeInstance = meInstance |
| |
| //verify response |
| err := oFsm.waitforOmciResponse() |
| if err != nil { |
| logger.Errorw("Evtocd set transparent singletagged rule failed, aborting VlanConfig FSM!", |
| log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvReset) |
| return |
| } |
| } else { |
| // according to py-code acceptIncrementalEvto program option decides upon stacking or translation scenario |
| if oFsm.acceptIncrementalEvtoOption { |
| // this defines VID translation scenario: singletagged->singletagged (if not transparent) |
| logger.Debugw("UniVlanConfigFsm Tx Set::EVTOCD single tagged translation rule", log.Fields{ |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| sliceEvtocdRule := make([]uint8, 16) |
| // fill vlan tagging operation table bit fields using network=bigEndian order and using slice offset 0 as highest 'word' |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cFilterOuterOffset:], |
| cPrioIgnoreTag<<cFilterPrioOffset| // Not an outer-tag rule |
| cDoNotFilterVid<<cFilterVidOffset| // Do not filter on outer vid |
| cDoNotFilterTPID<<cFilterTpidOffset) // Do not filter on outer TPID field |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cFilterInnerOffset:], |
| oFsm.uniFlowParamsSlice[aFlowEntryNo].MatchPcp<<cFilterPrioOffset| // either DNFonPrio or ignore tag (default) on innerVLAN |
| oFsm.uniFlowParamsSlice[aFlowEntryNo].MatchVid<<cFilterVidOffset| // either DNFonVid or real filter VID |
| cDoNotFilterTPID<<cFilterTpidOffset| // Do not filter on inner TPID field |
| cDoNotFilterEtherType<<cFilterEtherTypeOffset) // Do not filter of EtherType |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cTreatOuterOffset:], |
| oFsm.uniFlowParamsSlice[aFlowEntryNo].TagsToRemove<<cTreatTTROffset| // either 1 or 0 |
| cDoNotAddPrio<<cTreatPrioOffset| // do not add outer tag |
| cDontCareVid<<cTreatVidOffset| // Outer VID don't care |
| cDontCareTpid<<cTreatTpidOffset) // Outer TPID field don't care |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cTreatInnerOffset:], |
| oFsm.uniFlowParamsSlice[aFlowEntryNo].SetPcp<<cTreatPrioOffset| // as configured in flow |
| oFsm.uniFlowParamsSlice[aFlowEntryNo].SetVid<<cTreatVidOffset| //as configured in flow |
| cSetOutputTpidCopyDei<<cTreatTpidOffset) // Set TPID = 0x8100 |
| oFsm.mutexFlowParams.Unlock() |
| |
| meParams := me.ParamData{ |
| EntityID: oFsm.evtocdID, |
| Attributes: me.AttributeValueMap{ |
| "ReceivedFrameVlanTaggingOperationTable": sliceEvtocdRule, |
| }, |
| } |
| meInstance := oFsm.pOmciCC.sendSetEvtocdVar(context.TODO(), ConstDefaultOmciTimeout, true, |
| oFsm.pAdaptFsm.commChan, meParams) |
| //accept also nil as (error) return value for writing to LastTx |
| // - this avoids misinterpretation of new received OMCI messages |
| oFsm.pOmciCC.pLastTxMeInstance = meInstance |
| |
| //verify response |
| err := oFsm.waitforOmciResponse() |
| if err != nil { |
| logger.Errorw("Evtocd set singletagged translation rule failed, aborting VlanConfig FSM!", |
| log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvReset) |
| return |
| } |
| } else { |
| //not transparent and not acceptIncrementalEvtoOption untagged/priotagged->singletagged |
| { // just for local var's |
| // this defines stacking scenario: untagged->singletagged |
| logger.Debugw("UniVlanConfigFsm Tx Set::EVTOCD untagged->singletagged rule", log.Fields{ |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| sliceEvtocdRule := make([]uint8, 16) |
| // fill vlan tagging operation table bit fields using network=bigEndian order and using slice offset 0 as highest 'word' |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cFilterOuterOffset:], |
| cPrioIgnoreTag<<cFilterPrioOffset| // Not an outer-tag rule |
| cDoNotFilterVid<<cFilterVidOffset| // Do not filter on outer vid |
| cDoNotFilterTPID<<cFilterTpidOffset) // Do not filter on outer TPID field |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cFilterInnerOffset:], |
| cPrioIgnoreTag<<cFilterPrioOffset| // Not an inner-tag rule |
| cDoNotFilterVid<<cFilterVidOffset| // Do not filter on inner vid |
| cDoNotFilterTPID<<cFilterTpidOffset| // Do not filter on inner TPID field |
| cDoNotFilterEtherType<<cFilterEtherTypeOffset) // Do not filter of EtherType |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cTreatOuterOffset:], |
| 0<<cTreatTTROffset| // Do not pop any tags |
| cDoNotAddPrio<<cTreatPrioOffset| // do not add outer tag |
| cDontCareVid<<cTreatVidOffset| // Outer VID don't care |
| cDontCareTpid<<cTreatTpidOffset) // Outer TPID field don't care |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cTreatInnerOffset:], |
| 0<<cTreatPrioOffset| // vlan prio set to 0 |
| // (as done in Py code, maybe better option would be setPcp here, which still could be 0?) |
| oFsm.uniFlowParamsSlice[aFlowEntryNo].SetVid<<cTreatVidOffset| // Outer VID don't care |
| cSetOutputTpidCopyDei<<cTreatTpidOffset) // Set TPID = 0x8100 |
| |
| oFsm.mutexFlowParams.Unlock() |
| meParams := me.ParamData{ |
| EntityID: oFsm.evtocdID, |
| Attributes: me.AttributeValueMap{ |
| "ReceivedFrameVlanTaggingOperationTable": sliceEvtocdRule, |
| }, |
| } |
| meInstance := oFsm.pOmciCC.sendSetEvtocdVar(context.TODO(), ConstDefaultOmciTimeout, true, |
| oFsm.pAdaptFsm.commChan, meParams) |
| //accept also nil as (error) return value for writing to LastTx |
| // - this avoids misinterpretation of new received OMCI messages |
| oFsm.pOmciCC.pLastTxMeInstance = meInstance |
| |
| //verify response |
| err := oFsm.waitforOmciResponse() |
| if err != nil { |
| logger.Errorw("Evtocd set untagged->singletagged rule failed, aborting VlanConfig FSM!", |
| log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvReset) |
| return |
| } |
| } // just for local var's |
| { // just for local var's |
| // this defines 'stacking' scenario: priotagged->singletagged |
| logger.Debugw("UniVlanConfigFsm Tx Set::EVTOCD priotagged->singletagged rule", log.Fields{ |
| "device-id": oFsm.pAdaptFsm.deviceID}) |
| sliceEvtocdRule := make([]uint8, 16) |
| // fill vlan tagging operation table bit fields using network=bigEndian order and using slice offset 0 as highest 'word' |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cFilterOuterOffset:], |
| cPrioIgnoreTag<<cFilterPrioOffset| // Not an outer-tag rule |
| cDoNotFilterVid<<cFilterVidOffset| // Do not filter on outer vid |
| cDoNotFilterTPID<<cFilterTpidOffset) // Do not filter on outer TPID field |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cFilterInnerOffset:], |
| cPrioDoNotFilter<<cFilterPrioOffset| // Do not Filter on innerprio |
| 0<<cFilterVidOffset| // filter on inner vid 0 (prioTagged) |
| cDoNotFilterTPID<<cFilterTpidOffset| // Do not filter on inner TPID field |
| cDoNotFilterEtherType<<cFilterEtherTypeOffset) // Do not filter of EtherType |
| |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cTreatOuterOffset:], |
| 1<<cTreatTTROffset| // pop the prio-tag |
| cDoNotAddPrio<<cTreatPrioOffset| // do not add outer tag |
| cDontCareVid<<cTreatVidOffset| // Outer VID don't care |
| cDontCareTpid<<cTreatTpidOffset) // Outer TPID field don't care |
| |
| oFsm.mutexFlowParams.Lock() |
| binary.BigEndian.PutUint32(sliceEvtocdRule[cTreatInnerOffset:], |
| cCopyPrioFromInner<<cTreatPrioOffset| // vlan copy from PrioTag |
| // (as done in Py code, maybe better option would be setPcp here, which still could be PrioCopy?) |
| oFsm.uniFlowParamsSlice[aFlowEntryNo].SetVid<<cTreatVidOffset| // Outer VID as configured |
| cSetOutputTpidCopyDei<<cTreatTpidOffset) // Set TPID = 0x8100 |
| oFsm.mutexFlowParams.Unlock() |
| |
| meParams := me.ParamData{ |
| EntityID: oFsm.evtocdID, |
| Attributes: me.AttributeValueMap{ |
| "ReceivedFrameVlanTaggingOperationTable": sliceEvtocdRule, |
| }, |
| } |
| meInstance := oFsm.pOmciCC.sendSetEvtocdVar(context.TODO(), ConstDefaultOmciTimeout, true, |
| oFsm.pAdaptFsm.commChan, meParams) |
| //accept also nil as (error) return value for writing to LastTx |
| // - this avoids misinterpretation of new received OMCI messages |
| oFsm.pOmciCC.pLastTxMeInstance = meInstance |
| |
| //verify response |
| err := oFsm.waitforOmciResponse() |
| if err != nil { |
| logger.Errorw("Evtocd set priotagged->singletagged rule failed, aborting VlanConfig FSM!", |
| log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvReset) |
| return |
| } |
| } //just for local var's |
| } |
| } |
| |
| // if Config has been done for all GemPort instances let the FSM proceed |
| logger.Debugw("EVTOCD set loop finished", log.Fields{"device-id": oFsm.pAdaptFsm.deviceID}) |
| _ = oFsm.pAdaptFsm.pFsm.Event(vlanEvRxConfigEvtocd) |
| } |
| |
| func (oFsm *UniVlanConfigFsm) waitforOmciResponse() error { |
| select { |
| // maybe be also some outside cancel (but no context modeled for the moment ...) |
| // case <-ctx.Done(): |
| // logger.Infow("LockState-bridge-init message reception canceled", log.Fields{"for device-id": oFsm.pAdaptFsm.deviceID}) |
| case <-time.After(30 * time.Second): //AS FOR THE OTHER OMCI FSM's |
| logger.Warnw("UniVlanConfigFsm multi entity timeout", log.Fields{"for device-id": oFsm.pAdaptFsm.deviceID}) |
| return errors.New("uniVlanConfigFsm multi entity timeout") |
| case success := <-oFsm.omciMIdsResponseReceived: |
| if success { |
| logger.Debug("UniVlanConfigFsm multi entity response received") |
| return nil |
| } |
| // should not happen so far |
| logger.Warnw("UniVlanConfigFsm multi entity response error", log.Fields{"for device-id": oFsm.pAdaptFsm.deviceID}) |
| return errors.New("uniVlanConfigFsm multi entity responseError") |
| } |
| } |