blob: f27cac4e7177a007315d5d2605a78453dff31de0 [file] [log] [blame]
/*
* Copyright 2020-present Open Networking Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
//Package avcfg provides anig and vlan configuration functionality
package avcfg
import (
"context"
"fmt"
"strconv"
"strings"
"sync"
"github.com/opencord/voltha-lib-go/v7/pkg/log"
cmn "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/common"
"github.com/opencord/voltha-protos/v5/go/tech_profile"
)
//definitions for TechProfileProcessing - copied from OltAdapter:openolt_flowmgr.go
// could perhaps be defined more globally
const (
// binaryStringPrefix is binary string prefix
binaryStringPrefix = "0b"
// binaryBit1 is binary bit 1 expressed as a character
//binaryBit1 = '1'
)
//as defined in G.988
const (
cGemDirUniToAni = 1
cGemDirAniToUni = 2
cGemDirBiDirect = 3
)
// ResourceEntry - TODO: add comment
type ResourceEntry int
// TODO: add comment
const (
CResourceGemPort ResourceEntry = 1
CResourceTcont ResourceEntry = 2
)
type tTechProfileIndication struct {
techProfileType string
techProfileID uint8
techProfileConfigDone bool
techProfileToDelete bool
}
type tcontParamStruct struct {
allocID uint16
schedPolicy uint8
}
type gemPortParamStruct struct {
//ponOmciCC bool
gemPortID uint16
direction uint8
gemPortEncState uint8
prioQueueIndex uint8
pbitString string
discardPolicy string
//could also be a queue specific parameter, not used that way here
//maxQueueSize uint16
queueSchedPolicy string
queueWeight uint8
removeGemID uint16
isMulticast bool
//TODO check if this has any value/difference from gemPortId
multicastGemPortID uint16
staticACL string
dynamicACL string
}
//refers to one tcont and its properties and all assigned GemPorts and their properties
type tcontGemList struct {
tcontParams tcontParamStruct
mapGemPortParams map[uint16]*gemPortParamStruct
}
// refers a unique combination of uniID and tpID for a given ONU.
type uniTP struct {
uniID uint8
tpID uint8
}
//OnuUniTechProf structure holds information about the TechProfiles attached to Uni Ports of the ONU
type OnuUniTechProf struct {
deviceID string
baseDeviceHandler cmn.IdeviceHandler
onuDevice cmn.IonuDeviceEntry
tpProcMutex sync.RWMutex
chTpConfigProcessingStep chan uint8
mapUniTpIndication map[uniTP]*tTechProfileIndication //use pointer values to ease assignments to the map
mapPonAniConfig map[uniTP]*tcontGemList //per UNI: use pointer values to ease assignments to the map
PAniConfigFsm map[uniTP]*UniPonAniConfigFsm
procResult map[uniTP]error //error indication of processing
mutexTPState sync.RWMutex
tpProfileExists map[uniTP]bool
tpProfileResetting map[uniTP]bool
mapRemoveGemEntry map[uniTP]*gemPortParamStruct //per UNI: pointer to GemEntry to be removed
}
func (onuTP *OnuUniTechProf) multicastConfiguredForOtherUniTps(ctx context.Context, uniTpKey uniTP) bool {
for _, aniFsm := range onuTP.PAniConfigFsm {
if aniFsm.uniTpKey.uniID == uniTpKey.uniID && aniFsm.uniTpKey.tpID == uniTpKey.tpID {
continue
}
if aniFsm.hasMulticastGem(ctx) {
return true
}
}
return false
}
//NewOnuUniTechProf returns the instance of a OnuUniTechProf
//(one instance per ONU/deviceHandler for all possible UNI's)
func NewOnuUniTechProf(ctx context.Context, aDeviceHandler cmn.IdeviceHandler, aOnuDev cmn.IonuDeviceEntry) *OnuUniTechProf {
var onuTP OnuUniTechProf
onuTP.deviceID = aDeviceHandler.GetDeviceID()
logger.Debugw(ctx, "init-OnuUniTechProf", log.Fields{"device-id": onuTP.deviceID})
onuTP.baseDeviceHandler = aDeviceHandler
onuTP.onuDevice = aOnuDev
onuTP.chTpConfigProcessingStep = make(chan uint8)
onuTP.mapUniTpIndication = make(map[uniTP]*tTechProfileIndication)
onuTP.mapPonAniConfig = make(map[uniTP]*tcontGemList)
onuTP.procResult = make(map[uniTP]error)
onuTP.tpProfileExists = make(map[uniTP]bool)
onuTP.tpProfileResetting = make(map[uniTP]bool)
onuTP.mapRemoveGemEntry = make(map[uniTP]*gemPortParamStruct)
return &onuTP
}
// LockTpProcMutex locks OnuUniTechProf processing mutex
func (onuTP *OnuUniTechProf) LockTpProcMutex() {
onuTP.tpProcMutex.Lock()
}
// UnlockTpProcMutex unlocks OnuUniTechProf processing mutex
func (onuTP *OnuUniTechProf) UnlockTpProcMutex() {
onuTP.tpProcMutex.Unlock()
}
// ResetTpProcessingErrorIndication resets the internal error indication
// need to be called before evaluation of any subsequent processing (given by waitForTpCompletion())
func (onuTP *OnuUniTechProf) ResetTpProcessingErrorIndication(aUniID uint8, aTpID uint8) {
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTP{uniID: aUniID, tpID: aTpID}] = nil
}
// GetTpProcessingErrorIndication - TODO: add comment
func (onuTP *OnuUniTechProf) GetTpProcessingErrorIndication(aUniID uint8, aTpID uint8) error {
onuTP.mutexTPState.RLock()
defer onuTP.mutexTPState.RUnlock()
return onuTP.procResult[uniTP{uniID: aUniID, tpID: aTpID}]
}
// ConfigureUniTp checks existing tp resources to configure and starts the corresponding OMCI configuation of the UNI port
// all possibly blocking processing must be run in background to allow for deadline supervision!
// but take care on sequential background processing when needed (logical dependencies)
// use waitForTimeoutOrCompletion(ctx, chTpConfigProcessingStep, processingStep) for internal synchronization
func (onuTP *OnuUniTechProf) ConfigureUniTp(ctx context.Context,
aUniID uint8, aPathString string, tpInst tech_profile.TechProfileInstance, wg *sync.WaitGroup) {
defer wg.Done() //always decrement the waitGroup on return
logger.Debugw(ctx, "configure the Uni according to TpPath", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "path": aPathString})
tpID, err := cmn.GetTpIDFromTpPath(aPathString)
uniTpKey := uniTP{uniID: aUniID, tpID: tpID}
if err != nil {
logger.Errorw(ctx, "error-extracting-tp-id-from-tp-path", log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID, "path": aPathString})
return
}
//ensure that the given uniID is available (configured) in the UniPort class (used for OMCI entities)
var pCurrentUniPort *cmn.OnuUniPort
for _, uniPort := range *onuTP.baseDeviceHandler.GetUniEntityMap() {
// only if this port is validated for operState transfer
if uniPort.UniID == aUniID {
pCurrentUniPort = uniPort
break //found - end search loop
}
}
if pCurrentUniPort == nil {
logger.Errorw(ctx, "TechProfile configuration aborted: requested uniID not found in PortDB",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": uniTpKey.tpID})
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTpKey] = fmt.Errorf("techProfile config aborted: requested uniID not found %d on %s",
aUniID, onuTP.deviceID)
return
}
if onuTP.getProfileResetting(uniTpKey) {
logger.Debugw(ctx, "aborting TP configuration, reset requested in parallel", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": uniTpKey.tpID})
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTpKey] = fmt.Errorf(
"techProfile config aborted - reset requested in parallel - for uniID %d on %s",
aUniID, onuTP.deviceID)
return
}
var processingStep uint8 = 1 // used to synchronize the different processing steps with chTpConfigProcessingStep
//according to UpdateOnuUniTpPath() logic the assumption here is, that this configuration is only called
// in case the KVPath has changed for the given UNI,
// as T-Cont and Gem-Id's are dependent on TechProfile-Id this means, that possibly previously existing
// (ANI) configuration of this port has to be removed first
// (moreover in this case a possibly existing flow configuration is also not valid anymore and needs clean-up as well)
// existence of configuration can be detected based on tp stored TCONT's
//TODO:
/* if tcontMap not empty {
go onuTP.deleteAniSideConfig(ctx, aUniID, processingStep)
if !onuTP.waitForTimeoutOrCompletion(ctx, chTpConfigProcessingStep, processingStep) {
//timeout or error detected
return
}
clear tcontMap
}
processingStep++
*/
go onuTP.readAniSideConfigFromTechProfile(ctx, aUniID, tpID, aPathString, tpInst, processingStep)
if !onuTP.waitForTimeoutOrCompletion(ctx, onuTP.chTpConfigProcessingStep, processingStep) {
//timeout or error detected
onuTP.mutexTPState.RLock()
ok := onuTP.tpProfileExists[uniTpKey]
onuTP.mutexTPState.RUnlock()
if ok {
//ignore the internal error in case the new profile is already configured
// and abort the processing here
return
}
logger.Errorw(ctx, "tech-profile related configuration aborted on read",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID})
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTpKey] = fmt.Errorf("techProfile config aborted: tech-profile read issue for %d on %s",
aUniID, onuTP.deviceID)
return
}
if onuTP.getProfileResetting(uniTpKey) {
logger.Debugw(ctx, "aborting TP configuration, reset requested in parallel", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": uniTpKey.tpID})
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTpKey] = fmt.Errorf(
"techProfile config aborted - reset requested in parallel - for uniID %d on %s",
aUniID, onuTP.deviceID)
return
}
processingStep++
//ensure read protection for access to mapPonAniConfig
onuTP.mutexTPState.RLock()
valuePA, existPA := onuTP.mapPonAniConfig[uniTpKey]
onuTP.mutexTPState.RUnlock()
if existPA {
if valuePA != nil {
//Config data for this uni and and at least TCont Index 0 exist
if err := onuTP.setAniSideConfigFromTechProfile(ctx, aUniID, tpID, pCurrentUniPort, processingStep); err != nil {
logger.Errorw(ctx, "tech-profile related FSM could not be started",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID})
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTpKey] = err
return
}
if !onuTP.waitForTimeoutOrCompletion(ctx, onuTP.chTpConfigProcessingStep, processingStep) {
//timeout or error detected (included wanted cancellation after e.g. disable device (FsmReset))
logger.Warnw(ctx, "tech-profile related configuration aborted on set",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID})
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTpKey] = fmt.Errorf("techProfile config aborted: Omci AniSideConfig failed %d on %s",
aUniID, onuTP.deviceID)
//this issue here means that the AniConfigFsm has not finished successfully
//which requires to reset it to allow for new usage, e.g. also on a different UNI
//(without that it would be reset on device down indication latest)
if _, ok := onuTP.PAniConfigFsm[uniTpKey]; ok {
_ = onuTP.PAniConfigFsm[uniTpKey].PAdaptFsm.PFsm.Event(aniEvReset)
}
return
}
} else {
// strange: UNI entry exists, but no ANI data, maybe such situation should be cleared up (if observed)
logger.Errorw(ctx, "no Tcont/Gem data for this UNI found - abort", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID})
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTpKey] = fmt.Errorf("techProfile config aborted: no Tcont/Gem data found for this UNI %d on %s",
aUniID, onuTP.deviceID)
return
}
} else {
logger.Errorw(ctx, "no PonAni data for this UNI found - abort", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID})
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.procResult[uniTpKey] = fmt.Errorf("techProfile config aborted: no AniSide data found for this UNI %d on %s",
aUniID, onuTP.deviceID)
return
}
}
/* internal methods *********************/
// nolint: gocyclo
func (onuTP *OnuUniTechProf) readAniSideConfigFromTechProfile(
ctx context.Context, aUniID uint8, aTpID uint8, aPathString string, tpInst tech_profile.TechProfileInstance, aProcessingStep uint8) {
var err error
//store profile type and identifier for later usage within the OMCI identifier and possibly ME setup
//pathstring is defined to be in the form of <ProfType>/<profID>/<Interface/../Identifier>
subStringSlice := strings.Split(aPathString, "/")
if len(subStringSlice) <= 2 {
logger.Errorw(ctx, "invalid path name format",
log.Fields{"path": aPathString, "device-id": onuTP.deviceID})
onuTP.chTpConfigProcessingStep <- 0 //error indication
return
}
//ensure write protection for access to used maps
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
uniTPKey := uniTP{uniID: aUniID, tpID: aTpID}
onuTP.tpProfileExists[uniTP{uniID: aUniID, tpID: aTpID}] = false
//at this point it is assumed that a new TechProfile is assigned to the UNI
//expectation is that no TPIndication entry exists here, if exists and with the same TPId
// then we throw a warning, set an internal error and abort with error,
// which is later re-defined to success response to OLT adapter
// if TPId has changed, current data is removed (note that the ONU config state may be
// ambivalent in such a case)
if _, existTP := onuTP.mapUniTpIndication[uniTPKey]; existTP {
logger.Warnw(ctx, "Some active profile entry at reading new TechProfile",
log.Fields{"path": aPathString, "device-id": onuTP.deviceID,
"uni-id": aUniID, "wrongProfile": onuTP.mapUniTpIndication[uniTPKey].techProfileID})
if aTpID == onuTP.mapUniTpIndication[uniTPKey].techProfileID {
// ProfId not changed - assume profile to be still the same
// anyway this should not appear after full support of profile (Gem/TCont) removal
logger.Warnw(ctx, "New TechProfile already exists - aborting configuration",
log.Fields{"device-id": onuTP.deviceID})
onuTP.tpProfileExists[uniTPKey] = true
onuTP.chTpConfigProcessingStep <- 0 //error indication
return
}
//delete on the mapUniTpIndication map not needed, just overwritten later
//delete on the PonAniConfig map should be safe, even if not existing
delete(onuTP.mapPonAniConfig, uniTPKey)
} else {
// this is normal processing
onuTP.mapUniTpIndication[uniTPKey] = &tTechProfileIndication{} //need to assign some (empty) struct memory first!
}
onuTP.mapUniTpIndication[uniTPKey].techProfileType = subStringSlice[0]
//note the limitation on ID range (probably even more limited) - based on usage within OMCI EntityID
onuTP.mapUniTpIndication[uniTPKey].techProfileID = aTpID
onuTP.mapUniTpIndication[uniTPKey].techProfileConfigDone = false
onuTP.mapUniTpIndication[uniTPKey].techProfileToDelete = false
logger.Debugw(ctx, "tech-profile path indications",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID,
"profType": onuTP.mapUniTpIndication[uniTPKey].techProfileType,
"profID": onuTP.mapUniTpIndication[uniTPKey].techProfileID})
//default start with 1Tcont profile, later perhaps extend to MultiTcontMultiGem
localMapGemPortParams := make(map[uint16]*gemPortParamStruct)
onuTP.mapPonAniConfig[uniTPKey] = &tcontGemList{tcontParamStruct{}, localMapGemPortParams}
//note: the code is currently restricted to one TCcont per Onu (index [0])
//get the relevant values from the profile and store to mapPonAniConfig
onuTP.mapPonAniConfig[uniTPKey].tcontParams.allocID = uint16(tpInst.UsScheduler.AllocId)
//maybe tCont scheduling not (yet) needed - just to basically have it for future
// (would only be relevant in case of ONU-2G QOS configuration flexibility)
if tpInst.UsScheduler.QSchedPolicy == tech_profile.SchedulingPolicy_StrictPriority {
onuTP.mapPonAniConfig[uniTPKey].tcontParams.schedPolicy = 1 //for the moment fixed value acc. G.988 //TODO: defines!
} else {
//default profile defines "Hybrid" - which probably comes down to WRR with some weigthts for SP
onuTP.mapPonAniConfig[uniTPKey].tcontParams.schedPolicy = 2 //for G.988 WRR
}
loNumGemPorts := tpInst.NumGemPorts
loGemPortRead := false
for pos, content := range tpInst.UpstreamGemPortAttributeList {
if uint32(pos) == loNumGemPorts {
logger.Debugw(ctx, "PonAniConfig abort GemPortList - GemList exceeds set NumberOfGemPorts",
log.Fields{"device-id": onuTP.deviceID, "index": pos, "NumGem": loNumGemPorts})
break
}
if pos == 0 {
//at least one upstream GemPort should always exist (else traffic profile makes no sense)
loGemPortRead = true
}
//for all GemPorts we need to extend the mapGemPortParams
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)] = &gemPortParamStruct{}
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].gemPortID =
uint16(content.GemportId)
//direction can be correlated later with Downstream list,
// for now just assume bidirectional (upstream never exists alone)
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].direction = cGemDirBiDirect
// expected Prio-Queue values 0..7 with 7 for highest PrioQueue, QueueIndex=Prio = 0..7
if content.PriorityQ > 7 {
logger.Errorw(ctx, "PonAniConfig reject on GemPortList - PrioQueue value invalid",
log.Fields{"device-id": onuTP.deviceID, "index": pos, "PrioQueue": content.PriorityQ})
//remove PonAniConfig as done so far, delete map should be safe, even if not existing
delete(onuTP.mapPonAniConfig, uniTPKey)
onuTP.chTpConfigProcessingStep <- 0 //error indication
return
}
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].prioQueueIndex =
uint8(content.PriorityQ)
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].pbitString =
strings.TrimPrefix(content.PbitMap, binaryStringPrefix)
if content.AesEncryption == "True" {
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].gemPortEncState = 1
} else {
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].gemPortEncState = 0
}
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].discardPolicy =
content.DiscardPolicy.String()
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].queueSchedPolicy =
content.SchedulingPolicy.String()
//'GemWeight' looks strange in default profile, for now we just copy the weight to first queue
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[uint16(content.GemportId)].queueWeight =
uint8(content.Weight)
}
for _, downstreamContent := range tpInst.DownstreamGemPortAttributeList {
logger.Debugw(ctx, "Operating on Downstream Gem Port", log.Fields{"downstream-gem": downstreamContent})
//Commenting this out due to faliure, needs investigation
//if uint32(pos) == loNumGemPorts {
// logger.Debugw("PonAniConfig abort GemPortList - GemList exceeds set NumberOfGemPorts",
// log.Fields{"device-id": onuTP.deviceID, "index": pos, "NumGem": loNumGemPorts})
// break
//}
isMulticast := false
//Flag is defined as string in the TP in voltha-lib-go, parsing it from string
if downstreamContent.IsMulticast != "" {
isMulticast, err = strconv.ParseBool(downstreamContent.IsMulticast)
if err != nil {
logger.Errorw(ctx, "multicast-error-config-unknown-flag-in-technology-profile",
log.Fields{"device-id": onuTP.deviceID, "UniTpKey": uniTPKey, "downstream-gem": downstreamContent, "error": err})
continue
}
}
logger.Infow(ctx, "Gem Port is multicast", log.Fields{"isMulticast": isMulticast})
if isMulticast {
mcastGemID := uint16(downstreamContent.MulticastGemId)
_, existing := onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID]
if existing {
//GEM port was previously configured, avoid setting multicast attributes
logger.Errorw(ctx, "multicast-error-config-existing-gem-port-config", log.Fields{"device-id": onuTP.deviceID,
"UniTpKey": uniTPKey, "downstream-gem": downstreamContent, "key": mcastGemID})
continue
} else {
//GEM port is not configured, setting multicast attributes
logger.Infow(ctx, "creating-multicast-gem-port", log.Fields{"uniTpKey": uniTPKey,
"gemPortId": mcastGemID, "key": mcastGemID})
//for all further GemPorts we need to extend the mapGemPortParams
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID] = &gemPortParamStruct{}
//Separate McastGemId is derived from OMCI-lib-go, if not needed first needs to be removed there.
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].gemPortID = mcastGemID
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].direction = cGemDirAniToUni
if downstreamContent.AesEncryption == "True" {
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].gemPortEncState = 1
} else {
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].gemPortEncState = 0
}
// expected Prio-Queue values 0..7 with 7 for highest PrioQueue, QueueIndex=Prio = 0..7
if downstreamContent.PriorityQ > 7 {
logger.Errorw(ctx, "PonAniConfig reject on GemPortList - PrioQueue value invalid",
log.Fields{"device-id": onuTP.deviceID, "index": mcastGemID, "PrioQueue": downstreamContent.PriorityQ})
//remove PonAniConfig as done so far, delete map should be safe, even if not existing
delete(onuTP.mapPonAniConfig, uniTPKey)
onuTP.chTpConfigProcessingStep <- 0 //error indication
return
}
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].prioQueueIndex =
uint8(downstreamContent.PriorityQ)
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].pbitString =
strings.TrimPrefix(downstreamContent.PbitMap, binaryStringPrefix)
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].discardPolicy =
downstreamContent.DiscardPolicy.String()
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].queueSchedPolicy =
downstreamContent.SchedulingPolicy.String()
//'GemWeight' looks strange in default profile, for now we just copy the weight to first queue
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].queueWeight =
uint8(downstreamContent.Weight)
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].isMulticast = isMulticast
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].multicastGemPortID =
uint16(downstreamContent.MulticastGemId)
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].staticACL = downstreamContent.StaticAccessControlList
onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams[mcastGemID].dynamicACL = downstreamContent.DynamicAccessControlList
}
}
}
if !loGemPortRead {
logger.Errorw(ctx, "PonAniConfig reject - no GemPort could be read from TechProfile",
log.Fields{"path": aPathString, "device-id": onuTP.deviceID})
//remove PonAniConfig as done so far, delete map should be safe, even if not existing
delete(onuTP.mapPonAniConfig, uniTPKey)
onuTP.chTpConfigProcessingStep <- 0 //error indication
return
}
//logger does not simply output the given structures, just give some example debug values
logger.Debugw(ctx, "PonAniConfig read from TechProfile", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID,
"AllocId": onuTP.mapPonAniConfig[uniTPKey].tcontParams.allocID})
for gemPortID, gemEntry := range onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams {
logger.Debugw(ctx, "PonAniConfig read from TechProfile", log.Fields{
"GemPort": gemPortID,
"QueueScheduling": gemEntry.queueSchedPolicy})
}
onuTP.chTpConfigProcessingStep <- aProcessingStep //done
}
func (onuTP *OnuUniTechProf) setAniSideConfigFromTechProfile(
ctx context.Context, aUniID uint8, aTpID uint8, apCurrentUniPort *cmn.OnuUniPort, aProcessingStep uint8) error {
//OMCI transfer of ANI data acc. to mapPonAniConfig
// also the FSM's are running in background,
// hence we have to make sure they indicate 'success' on chTpConfigProcessingStep with aProcessingStep
uniTPKey := uniTP{uniID: aUniID, tpID: aTpID}
if onuTP.PAniConfigFsm == nil {
return onuTP.createAniConfigFsm(ctx, aUniID, aTpID, apCurrentUniPort, cmn.OmciAniConfigDone, aProcessingStep)
} else if _, ok := onuTP.PAniConfigFsm[uniTPKey]; !ok {
return onuTP.createAniConfigFsm(ctx, aUniID, aTpID, apCurrentUniPort, cmn.OmciAniConfigDone, aProcessingStep)
}
//AniConfigFsm already init
return onuTP.runAniConfigFsm(ctx, aniEvStart, aProcessingStep, aUniID, aTpID)
}
// DeleteTpResource removes Resources from the ONU's specified Uni
// nolint: gocyclo
func (onuTP *OnuUniTechProf) DeleteTpResource(ctx context.Context,
aUniID uint8, aTpID uint8, aPathString string, aResource ResourceEntry, aEntryID uint32,
wg *sync.WaitGroup) {
defer wg.Done()
logger.Debugw(ctx, "will remove TP resources from ONU's UNI", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "path": aPathString, "Resource": aResource})
uniTPKey := uniTP{uniID: aUniID, tpID: aTpID}
if CResourceGemPort == aResource {
logger.Debugw(ctx, "remove GemPort from the list of existing ones of the TP", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "path": aPathString, "GemPort": aEntryID})
//ensure read protection for access to mapPonAniConfig
onuTP.mutexTPState.RLock()
// check if the requested GemPort exists in the DB, indicate it to the FSM
// store locally to remove it from DB later on success
pLocAniConfigOnUni := onuTP.mapPonAniConfig[uniTPKey]
if pLocAniConfigOnUni == nil {
onuTP.mutexTPState.RUnlock()
// No relevant entry exists anymore - acknowledge success
logger.Debugw(ctx, "AniConfig or GemEntry do not exists in DB", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID})
return
}
onuTP.mutexTPState.RUnlock()
for gemPortID, gemEntry := range pLocAniConfigOnUni.mapGemPortParams {
if gemPortID == uint16(aEntryID) {
//GemEntry to be deleted found
gemEntry.removeGemID = gemPortID //store the index for later removal
onuTP.mapRemoveGemEntry[uniTPKey] = pLocAniConfigOnUni.mapGemPortParams[gemPortID]
logger.Debugw(ctx, "Remove-GemEntry stored", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID, "GemPort": aEntryID})
break //abort loop, always only one GemPort to remove
}
}
if onuTP.mapRemoveGemEntry[uniTPKey] == nil {
logger.Errorw(ctx, "GemPort removal aborted - GemPort not found",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID, "GemPort": aEntryID})
/* Do not set some error indication to the outside system interface on delete
assume there is nothing to be deleted internally and hope a new config request will recover the situation
onuTP.procResult[uniTpKey] = fmt.Errorf("GemPort removal aborted: GemPort not found %d for %d on %s",
aEntryID, aUniID, onuTP.deviceID)
*/
return
}
if onuTP.baseDeviceHandler.IsReadyForOmciConfig() {
// check that the TpConfigRequest was done before
// -> that is implicitly done using the AniConfigFsm,
// which must be in the according state to remove something
if onuTP.PAniConfigFsm == nil {
logger.Errorw(ctx, "abort GemPort removal - no AniConfigFsm available",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID})
/* Do not set some error indication to the outside system interface on delete (see above)
onuTP.procResult[uniTpKey] = fmt.Errorf("GemPort removal aborted: no AniConfigFsm available %d on %s",
aUniID, onuTP.deviceID)
*/
//if the FSM is not valid, also TP related remove data should not be valid:
// remove GemPort from config DB
//ensure write protection for access to mapPonAniConfig
onuTP.mutexTPState.Lock()
delete(onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams, onuTP.mapRemoveGemEntry[uniTPKey].removeGemID)
// remove the removeEntry
delete(onuTP.mapRemoveGemEntry, uniTPKey)
onuTP.mutexTPState.Unlock()
return
}
if _, ok := onuTP.PAniConfigFsm[uniTPKey]; !ok {
logger.Errorw(ctx, "abort GemPort removal - no AniConfigFsm available for this uni/tp",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID})
/* Do not set some error indication to the outside system interface on delete (see above)
onuTP.procResult[uniTpKey] = fmt.Errorf("GemPort removal aborted: no AniConfigFsm available %d on %s for tpid",
aUniID, onuTP.deviceID, aTpID)
*/
//if the FSM is not valid, also TP related remove data should not be valid:
// remove GemPort from config DB
//ensure write protection for access to mapPonAniConfig
onuTP.mutexTPState.Lock()
delete(onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams, onuTP.mapRemoveGemEntry[uniTPKey].removeGemID)
// remove the removeEntry
delete(onuTP.mapRemoveGemEntry, uniTPKey)
onuTP.mutexTPState.Unlock()
return
}
if onuTP.getProfileResetting(uniTPKey) {
logger.Debugw(ctx, "aborting GemRemoval on FSM, reset requested in parallel", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID})
//ensure write protection for access to mapPonAniConfig
onuTP.mutexTPState.Lock()
delete(onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams, onuTP.mapRemoveGemEntry[uniTPKey].removeGemID)
// remove the removeEntry
delete(onuTP.mapRemoveGemEntry, uniTPKey)
onuTP.mutexTPState.Unlock()
return
}
// initiate OMCI GemPort related removal
var processingStep uint8 = 1 // used to synchronize the different processing steps with chTpConfigProcessingStep
// hence we have to make sure they indicate 'success' on chTpConfigProcessingStep with aProcessingStep
if nil != onuTP.runAniConfigFsm(ctx, aniEvRemGemiw, processingStep, aUniID, aTpID) {
//even if the FSM invocation did not work we don't indicate a problem within procResult
//errors could exist also because there was nothing to delete - so we just accept that as 'deleted'
//TP related data cleared by FSM error treatment or re-used by FSM error-recovery (if implemented)
return
}
if !onuTP.waitForTimeoutOrCompletion(ctx, onuTP.chTpConfigProcessingStep, processingStep) {
//timeout or error detected (included wanted cancellation after e.g. disable device (FsmReset))
logger.Warnw(ctx, "GemPort removal aborted - Omci AniSideConfig failed",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID})
//even if the FSM delete execution did not work we don't indicate a problem within procResult
//we should never respond to delete with error ...
//this issue here means that the AniConfigFsm has not finished successfully
//which requires to reset it to allow for new usage, e.g. also on a different UNI
//(without that it would be reset on device down indication latest)
if _, ok := onuTP.PAniConfigFsm[uniTPKey]; ok {
_ = onuTP.PAniConfigFsm[uniTPKey].PAdaptFsm.PFsm.Event(aniEvReset)
}
//TP related data cleared by FSM error treatment or re-used by FSM error-recovery (if implemented)
return
}
} else {
//if we can't do the OMCI processing we also suppress the ProcStatusUpdate
//this is needed as in the device-down case where all FSM's are getting reset and internal data gets cleared
//as a consequence a possible remove-flow does not see any dependency on the TechProfile anymore and is executed (pro forma) directly
//a later TechProfile removal would cause the device-reason to be updated to 'techProfile-delete-success' which is not the expected state
// and anyway is no real useful information at that stage
logger.Debugw(ctx, "UniPonAniConfigFsm delete Gem on OMCI skipped based on device state", log.Fields{
"device-id": onuTP.deviceID, "device-state": onuTP.baseDeviceHandler.GetDeviceReasonString()})
}
// remove GemPort from config DB
//ensure write protection for access to mapPonAniConfig
logger.Debugw(ctx, "UniPonAniConfigFsm removing gem from config data and clearing ani FSM", log.Fields{
"device-id": onuTP.deviceID, "gem-id": onuTP.mapRemoveGemEntry[uniTPKey].removeGemID, "uniTPKey": uniTPKey})
onuTP.mutexTPState.Lock()
delete(onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams, onuTP.mapRemoveGemEntry[uniTPKey].removeGemID)
// remove the removeEntry
delete(onuTP.mapRemoveGemEntry, uniTPKey)
onuTP.mutexTPState.Unlock()
} else { //if CResourceTcont == aResource {
logger.Debugw(ctx, "reset TCont with AllocId", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "path": aPathString, "allocId": aEntryID})
//ensure read protection for access to mapPonAniConfig
onuTP.mutexTPState.RLock()
// check if the TCont with the indicated AllocId exists in the DB, indicate its EntityId to the FSM
pLocAniConfigOnUni := onuTP.mapPonAniConfig[uniTPKey]
if pLocAniConfigOnUni == nil {
// No relevant entry exists anymore - acknowledge success
onuTP.mutexTPState.RUnlock()
logger.Debugw(ctx, "AniConfig or TCont entry do not exists in DB", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID})
return
}
onuTP.mutexTPState.RUnlock()
if pLocAniConfigOnUni.tcontParams.allocID != uint16(aEntryID) {
logger.Errorw(ctx, "TCont removal aborted - indicated AllocId not found",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID, "AllocId": aEntryID})
/* Do not set some error indication to the outside system interface on delete
assume there is nothing to be deleted internally and hope a new config request will recover the situation
onuTP.procResult[uniTpKey] = fmt.Errorf("TCont removal aborted: AllocId not found %d for %d on %s",
aEntryID, aUniID, onuTP.deviceID)
*/
return
}
//T-Cont to be reset found
logger.Debugw(ctx, "Reset-T-Cont AllocId found - valid", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "AllocId": aEntryID})
if onuTP.PAniConfigFsm == nil {
logger.Errorw(ctx, "no TCont removal on OMCI - no AniConfigFsm available",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID})
/* Do not set some error indication to the outside system interface on delete (see above)
onuTP.procResult[uniTpKey] = fmt.Errorf("TCont cleanup aborted: no AniConfigFsm available %d on %s",
aUniID, onuTP.deviceID)
*/
return
}
if _, ok := onuTP.PAniConfigFsm[uniTPKey]; !ok {
logger.Errorw(ctx, "no TCont removal on OMCI - no AniConfigFsm available for this uni/tp",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID})
//even if the FSM invocation did not work we don't indicate a problem within procResult
//errors could exist also because there was nothing to delete - so we just accept that as 'deleted'
//if the FSM is not valid, also TP related data should not be valid - clear the internal store profile data
return
}
if onuTP.baseDeviceHandler.IsReadyForOmciConfig() {
// check that the TpConfigRequest was done before
// -> that is implicitly done using the AniConfigFsm,
// which must be in the according state to remove something
if onuTP.getProfileResetting(uniTPKey) {
logger.Debugw(ctx, "aborting TCont removal on FSM, reset requested in parallel", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID, "tp-id": aTpID})
return
}
// initiate OMCI TCont related cleanup
var processingStep uint8 = 1 // used to synchronize the different processing steps with chTpConfigProcessingStep
// hence we have to make sure they indicate 'success' on chTpConfigProcessingStep with aProcessingStep
if nil != onuTP.runAniConfigFsm(ctx, aniEvRemTcontPath, processingStep, aUniID, aTpID) {
//even if the FSM invocation did not work we don't indicate a problem within procResult
//errors could exist also because there was nothing to delete - so we just accept that as 'deleted'
//TP related data cleared by FSM error treatment or re-used by FSM error-recovery (if implemented)
return
}
if !onuTP.waitForTimeoutOrCompletion(ctx, onuTP.chTpConfigProcessingStep, processingStep) {
//timeout or error detected (included wanted cancellation after e.g. disable device (FsmReset))
logger.Warnw(ctx, "TCont cleanup aborted - Omci AniSideConfig failed",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID})
//even if the FSM delete execution did not work we don't indicate a problem within procResult
//we should never respond to delete with error ...
//this issue here means that the AniConfigFsm has not finished successfully
//which requires to reset it to allow for new usage, e.g. also on a different UNI
//(without that it would be reset on device down indication latest)
if _, ok := onuTP.PAniConfigFsm[uniTPKey]; ok {
_ = onuTP.PAniConfigFsm[uniTPKey].PAdaptFsm.PFsm.Event(aniEvReset)
}
//TP related data cleared by FSM error treatment or re-used by FSM error-recovery (if implemented)
return
}
} else {
//see gemPort comments
logger.Debugw(ctx, "UniPonAniConfigFsm TCont cleanup on OMCI skipped based on device state", log.Fields{
"device-id": onuTP.deviceID, "device-state": onuTP.baseDeviceHandler.GetDeviceReasonString()})
}
}
}
// IsTechProfileConfigCleared - TODO: add comment
func (onuTP *OnuUniTechProf) IsTechProfileConfigCleared(ctx context.Context, uniID uint8, tpID uint8) bool {
uniTPKey := uniTP{uniID: uniID, tpID: tpID}
logger.Debugw(ctx, "IsTechProfileConfigCleared", log.Fields{"device-id": onuTP.deviceID})
if onuTP.mapPonAniConfig[uniTPKey] != nil {
mapGemPortParams := onuTP.mapPonAniConfig[uniTPKey].mapGemPortParams
unicastGemCount := 0
for _, gemEntry := range mapGemPortParams {
if !gemEntry.isMulticast {
unicastGemCount++
}
}
if unicastGemCount == 0 || onuTP.mapPonAniConfig[uniTPKey].tcontParams.allocID == 0 {
logger.Debugw(ctx, "clearing-ani-side-config", log.Fields{
"device-id": onuTP.deviceID, "uniTpKey": uniTPKey})
onuTP.clearAniSideConfig(ctx, uniID, tpID)
if _, ok := onuTP.PAniConfigFsm[uniTPKey]; ok {
_ = onuTP.PAniConfigFsm[uniTPKey].PAdaptFsm.PFsm.Event(aniEvReset)
}
go onuTP.baseDeviceHandler.DeviceProcStatusUpdate(ctx, cmn.OmciAniResourceRemoved)
return true
}
}
return false
}
func (onuTP *OnuUniTechProf) waitForTimeoutOrCompletion(
ctx context.Context, aChTpProcessingStep <-chan uint8, aProcessingStep uint8) bool {
select {
case <-ctx.Done():
logger.Warnw(ctx, "processing not completed in-time: force release of TpProcMutex!",
log.Fields{"device-id": onuTP.deviceID, "error": ctx.Err()})
return false
case rxStep := <-aChTpProcessingStep:
if rxStep == aProcessingStep {
return true
}
//all other values are not accepted - including 0 for error indication
logger.Warnw(ctx, "Invalid processing step received: abort and force release of TpProcMutex!",
log.Fields{"device-id": onuTP.deviceID,
"wantedStep": aProcessingStep, "haveStep": rxStep})
return false
}
}
// createAniConfigFsm initializes and runs the AniConfig FSM to transfer the OMCI related commands for ANI side configuration
func (onuTP *OnuUniTechProf) createAniConfigFsm(ctx context.Context, aUniID uint8, aTpID uint8,
apCurrentUniPort *cmn.OnuUniPort, devEvent cmn.OnuDeviceEvent, aProcessingStep uint8) error {
logger.Debugw(ctx, "createAniConfigFsm", log.Fields{"device-id": onuTP.deviceID})
chAniConfigFsm := make(chan cmn.Message, 2048)
uniTPKey := uniTP{uniID: aUniID, tpID: aTpID}
if onuTP.onuDevice == nil {
logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": onuTP.deviceID})
return fmt.Errorf("no valid OnuDevice: %s", onuTP.deviceID)
}
pAniCfgFsm := NewUniPonAniConfigFsm(ctx, onuTP.onuDevice.GetDevOmciCC(), apCurrentUniPort, onuTP,
onuTP.onuDevice.GetOnuDB(), aTpID, onuTP.mapUniTpIndication[uniTPKey].techProfileType, devEvent,
"AniConfigFsm", onuTP.baseDeviceHandler, onuTP.onuDevice, chAniConfigFsm)
if pAniCfgFsm == nil {
logger.Errorw(ctx, "AniConfigFSM could not be created - abort!!", log.Fields{"device-id": onuTP.deviceID})
return fmt.Errorf("could not create AniConfigFSM: %s", onuTP.deviceID)
}
if onuTP.PAniConfigFsm == nil {
onuTP.PAniConfigFsm = make(map[uniTP]*UniPonAniConfigFsm)
}
onuTP.PAniConfigFsm[uniTPKey] = pAniCfgFsm
return onuTP.runAniConfigFsm(ctx, aniEvStart, aProcessingStep, aUniID, aTpID)
}
// runAniConfigFsm starts the AniConfig FSM to transfer the OMCI related commands for ANI side configuration
func (onuTP *OnuUniTechProf) runAniConfigFsm(ctx context.Context, aEvent string, aProcessingStep uint8, aUniID uint8, aTpID uint8) error {
/* Uni related ANI config procedure -
***** should run via 'aniConfigDone' state and generate the argument requested event *****
*/
uniTpKey := uniTP{uniID: aUniID, tpID: aTpID}
pACStatemachine := onuTP.PAniConfigFsm[uniTpKey].PAdaptFsm.PFsm
if pACStatemachine != nil {
if aEvent == aniEvStart {
if !pACStatemachine.Is(aniStDisabled) {
logger.Errorw(ctx, "wrong state of AniConfigFSM to start - want: Disabled", log.Fields{
"have": pACStatemachine.Current(), "device-id": onuTP.deviceID})
// maybe try a FSM reset and then again ... - TODO: add comment!!!
return fmt.Errorf("wrong state of AniConfigFSM to start: %s", onuTP.deviceID)
}
} else if !pACStatemachine.Is(aniStConfigDone) {
logger.Errorw(ctx, "wrong state of AniConfigFSM to remove - want: ConfigDone", log.Fields{
"have": pACStatemachine.Current(), "device-id": onuTP.deviceID})
return fmt.Errorf("wrong state of AniConfigFSM to remove: %s", onuTP.deviceID)
}
//FSM init requirement to get informed about FSM completion! (otherwise timeout of the TechProf config)
onuTP.PAniConfigFsm[uniTpKey].setFsmCompleteChannel(onuTP.chTpConfigProcessingStep, aProcessingStep)
if err := pACStatemachine.Event(aEvent); err != nil {
logger.Errorw(ctx, "AniConfigFSM: can't trigger event", log.Fields{"device-id": onuTP.deviceID, "err": err})
return fmt.Errorf("can't trigger event in AniConfigFSM: %s", onuTP.deviceID)
}
/***** AniConfigFSM event notified */
logger.Debugw(ctx, "AniConfigFSM event notified", log.Fields{
"state": pACStatemachine.Current(), "device-id": onuTP.deviceID, "event": aEvent})
return nil
}
logger.Errorw(ctx, "AniConfigFSM StateMachine invalid - cannot be executed!!", log.Fields{"device-id": onuTP.deviceID})
// maybe try a FSM reset and then again ... - TODO: add comment!!!
return fmt.Errorf("stateMachine AniConfigFSM invalid: %s", onuTP.deviceID)
}
// clearAniSideConfig deletes internal TechProfile related data connected to the requested UniPort and TpID
func (onuTP *OnuUniTechProf) clearAniSideConfig(ctx context.Context, aUniID uint8, aTpID uint8) {
logger.Debugw(ctx, "removing TpIndication and PonAniConfig data", log.Fields{
"device-id": onuTP.deviceID, "uni-id": aUniID})
uniTpKey := uniTP{uniID: aUniID, tpID: aTpID}
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
//deleting a map entry should be safe, even if not existing
delete(onuTP.mapUniTpIndication, uniTpKey)
delete(onuTP.mapPonAniConfig, uniTpKey)
delete(onuTP.procResult, uniTpKey)
delete(onuTP.tpProfileExists, uniTpKey)
delete(onuTP.tpProfileResetting, uniTpKey)
}
// setConfigDone sets the requested techProfile config state (if possible)
func (onuTP *OnuUniTechProf) setConfigDone(aUniID uint8, aTpID uint8, aState bool) {
uniTpKey := uniTP{uniID: aUniID, tpID: aTpID}
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
if _, existTP := onuTP.mapUniTpIndication[uniTpKey]; existTP {
onuTP.mapUniTpIndication[uniTpKey].techProfileConfigDone = aState
} //else: the state is just ignored (does not exist)
}
// getTechProfileDone checks if the Techprofile processing with the requested TechProfile ID was done
func (onuTP *OnuUniTechProf) getTechProfileDone(ctx context.Context, aUniID uint8, aTpID uint8) bool {
uniTpKey := uniTP{uniID: aUniID, tpID: aTpID}
onuTP.mutexTPState.RLock()
defer onuTP.mutexTPState.RUnlock()
if _, existTP := onuTP.mapUniTpIndication[uniTpKey]; existTP {
if onuTP.mapUniTpIndication[uniTpKey].techProfileID == aTpID {
if onuTP.mapUniTpIndication[uniTpKey].techProfileToDelete {
logger.Debugw(ctx, "TechProfile not relevant for requested flow config - waiting on delete",
log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID})
return false //still waiting for removal of this techProfile first
}
return onuTP.mapUniTpIndication[uniTpKey].techProfileConfigDone
}
}
//for all other constellations indicate false = Config not done
return false
}
// SetProfileToDelete sets the requested techProfile toDelete state (if possible)
func (onuTP *OnuUniTechProf) SetProfileToDelete(aUniID uint8, aTpID uint8, aState bool) {
uniTpKey := uniTP{uniID: aUniID, tpID: aTpID}
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
if _, existTP := onuTP.mapUniTpIndication[uniTpKey]; existTP {
onuTP.mapUniTpIndication[uniTpKey].techProfileToDelete = aState
} //else: the state is just ignored (does not exist)
}
func (onuTP *OnuUniTechProf) getMulticastGemPorts(ctx context.Context, aUniID uint8, aTpID uint8) []uint16 {
uniTpKey := uniTP{uniID: aUniID, tpID: aTpID}
onuTP.mutexTPState.RLock()
defer onuTP.mutexTPState.RUnlock()
gemPortIds := make([]uint16, 0)
if techProfile, existTP := onuTP.mapPonAniConfig[uniTpKey]; existTP {
for _, gemPortParam := range techProfile.mapGemPortParams {
if gemPortParam.isMulticast {
logger.Debugw(ctx, "Detected multicast gemPort", log.Fields{"device-id": onuTP.deviceID,
"aUniID": aUniID, "aTPID": aTpID, "uniTPKey": uniTpKey,
"mcastGemId": gemPortParam.multicastGemPortID})
gemPortIds = append(gemPortIds, gemPortParam.multicastGemPortID)
}
}
} //else: the state is just ignored (does not exist)
return gemPortIds
}
func (onuTP *OnuUniTechProf) getBidirectionalGemPortIDsForTP(ctx context.Context, aUniID uint8, aTpID uint8) []uint16 {
uniTpKey := uniTP{uniID: aUniID, tpID: aTpID}
onuTP.mutexTPState.RLock()
defer onuTP.mutexTPState.RUnlock()
gemPortIds := make([]uint16, 0)
if techProfile, existTP := onuTP.mapPonAniConfig[uniTpKey]; existTP {
logger.Debugw(ctx, "TechProfile exist", log.Fields{"device-id": onuTP.deviceID})
for _, gemPortParam := range techProfile.mapGemPortParams {
if !gemPortParam.isMulticast {
logger.Debugw(ctx, "Detected unicast gemPort", log.Fields{"device-id": onuTP.deviceID,
"aUniID": aUniID, "aTPID": aTpID, "uniTPKey": uniTpKey,
"GemId": gemPortParam.multicastGemPortID})
gemPortIds = append(gemPortIds, gemPortParam.gemPortID)
}
}
} else {
logger.Debugw(ctx, "TechProfile doesn't exist", log.Fields{"device-id": onuTP.deviceID})
} //else: the state is just ignored (does not exist)
logger.Debugw(ctx, "Gem PortID list", log.Fields{"device-id": onuTP.deviceID, "gemportList": gemPortIds})
return gemPortIds
}
// GetAllBidirectionalGemPortIDsForOnu - TODO: add comment
func (onuTP *OnuUniTechProf) GetAllBidirectionalGemPortIDsForOnu() []uint16 {
var gemPortInstIDs []uint16
onuTP.mutexTPState.RLock()
defer onuTP.mutexTPState.RUnlock()
for _, tcontGemList := range onuTP.mapPonAniConfig {
for gemPortID, gemPortData := range tcontGemList.mapGemPortParams {
if gemPortData != nil && !gemPortData.isMulticast { // only if not multicast gem port
gemPortInstIDs = append(gemPortInstIDs, gemPortID)
}
}
}
return gemPortInstIDs
}
// GetNumberOfConfiguredUsGemPorts - provides the number of Gem ports for each UNI/TP combination
func (onuTP *OnuUniTechProf) GetNumberOfConfiguredUsGemPorts(ctx context.Context) int {
onuTP.mutexTPState.RLock()
defer onuTP.mutexTPState.RUnlock()
usGemPorts := make([]uint16, 0)
for _, tcontGemList := range onuTP.mapPonAniConfig {
for gemPortID, gemPortParams := range tcontGemList.mapGemPortParams {
if gemPortParams.direction == cGemDirBiDirect || gemPortParams.direction == cGemDirUniToAni {
alreadyConfigured := false
for _, foundUsGemPortID := range usGemPorts {
if foundUsGemPortID == gemPortID {
alreadyConfigured = true
break
}
}
if !alreadyConfigured {
usGemPorts = append(usGemPorts, gemPortID)
}
}
}
}
return len(usGemPorts)
}
// setProfileResetting sets/resets the indication, that a reset of the TechProfileConfig/Removal is ongoing
func (onuTP *OnuUniTechProf) setProfileResetting(ctx context.Context, aUniID uint8, aTpID uint8, aState bool) {
uniTpKey := uniTP{uniID: aUniID, tpID: aTpID}
onuTP.mutexTPState.Lock()
defer onuTP.mutexTPState.Unlock()
onuTP.tpProfileResetting[uniTpKey] = aState
}
// getProfileResetting returns true, if the the according indication for started reset procedure is set
func (onuTP *OnuUniTechProf) getProfileResetting(aUniTpKey uniTP) bool {
onuTP.mutexTPState.RLock()
defer onuTP.mutexTPState.RUnlock()
if isResetting, exist := onuTP.tpProfileResetting[aUniTpKey]; exist {
return isResetting
}
return false
}
// PrepareForGarbageCollection - remove references to prepare for garbage collection
func (onuTP *OnuUniTechProf) PrepareForGarbageCollection(ctx context.Context, aDeviceID string) {
logger.Debugw(ctx, "prepare for garbage collection", log.Fields{"device-id": aDeviceID})
onuTP.baseDeviceHandler = nil
onuTP.onuDevice = nil
for k, v := range onuTP.PAniConfigFsm {
v.PrepareForGarbageCollection(ctx, aDeviceID)
delete(onuTP.PAniConfigFsm, k)
}
}