blob: 74881f893a340e74a76ea0284e0835c32a1a0486 [file] [log] [blame]
/*
* Copyright 2020-present Open Networking Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
//Package adaptercoreonu provides the utility for onu devices, flows and statistics
package adaptercoreonu
import (
"context"
"fmt"
"time"
"github.com/looplab/fsm"
"github.com/opencord/omci-lib-go"
me "github.com/opencord/omci-lib-go/generated"
"github.com/opencord/voltha-lib-go/v3/pkg/log"
//ic "github.com/opencord/voltha-protos/v3/go/inter_container"
//"github.com/opencord/voltha-protos/v3/go/openflow_13"
//"github.com/opencord/voltha-protos/v3/go/voltha"
)
func (onuDeviceEntry *OnuDeviceEntry) enterDLStartingState(e *fsm.Event) {
logger.Debugw("MibDownload FSM", log.Fields{"Start downloading OMCI MIB in state": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID})
// in case the used channel is not yet defined (can be re-used after restarts)
if onuDeviceEntry.omciMessageReceived == nil {
onuDeviceEntry.omciMessageReceived = make(chan bool)
logger.Debug("MibDownload FSM - defining the BridgeInit RxChannel")
}
// start go routine for processing of MibDownload messages
go onuDeviceEntry.processMibDownloadMessages()
}
func (onuDeviceEntry *OnuDeviceEntry) enterCreatingGalState(e *fsm.Event) {
logger.Debugw("MibDownload FSM", log.Fields{"Tx create::GAL Ethernet Profile in state": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID})
meInstance := onuDeviceEntry.PDevOmciCC.sendCreateGalEthernetProfile(context.TODO(), ConstDefaultOmciTimeout, true)
//accept also nil as (error) return value for writing to LastTx
// - this avoids misinterpretation of new received OMCI messages
onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance
}
func (onuDeviceEntry *OnuDeviceEntry) enterSettingOnu2gState(e *fsm.Event) {
logger.Debugw("MibDownload FSM", log.Fields{"Tx Set::ONU2-G in state": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID})
meInstance := onuDeviceEntry.PDevOmciCC.sendSetOnu2g(context.TODO(), ConstDefaultOmciTimeout, true)
//accept also nil as (error) return value for writing to LastTx
// - this avoids misinterpretation of new received OMCI messages
onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance
}
func (onuDeviceEntry *OnuDeviceEntry) enterBridgeInitState(e *fsm.Event) {
logger.Infow("MibDownload FSM - starting bridge config port loop", log.Fields{
"in state": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID})
go onuDeviceEntry.performInitialBridgeSetup()
}
func (onuDeviceEntry *OnuDeviceEntry) enterDownloadedState(e *fsm.Event) {
logger.Debugw("MibDownload FSM", log.Fields{"send notification to core in State": e.FSM.Current(), "device-id": onuDeviceEntry.deviceID})
onuDeviceEntry.transferSystemEvent(MibDownloadDone)
//let's reset the state machine in order to release all resources now
pMibDlFsm := onuDeviceEntry.pMibDownloadFsm
if pMibDlFsm != nil {
// obviously calling some FSM event here directly does not work - so trying to decouple it ...
go func(a_pAFsm *AdapterFsm) {
if a_pAFsm != nil && a_pAFsm.pFsm != nil {
_ = a_pAFsm.pFsm.Event(dlEvReset)
}
}(pMibDlFsm)
}
}
func (onuDeviceEntry *OnuDeviceEntry) enterResettingState(e *fsm.Event) {
logger.Debugw("MibDownload FSM resetting", log.Fields{"device-id": onuDeviceEntry.deviceID})
pMibDlFsm := onuDeviceEntry.pMibDownloadFsm
if pMibDlFsm != nil {
// abort running message processing
fsmAbortMsg := Message{
Type: TestMsg,
Data: TestMessage{
TestMessageVal: AbortMessageProcessing,
},
}
pMibDlFsm.commChan <- fsmAbortMsg
//try to restart the FSM to 'disabled'
// see DownloadedState: decouple event transfer
go func(a_pAFsm *AdapterFsm) {
if a_pAFsm != nil && a_pAFsm.pFsm != nil {
_ = a_pAFsm.pFsm.Event(dlEvRestart)
}
}(pMibDlFsm)
}
}
func (onuDeviceEntry *OnuDeviceEntry) processMibDownloadMessages( /*ctx context.Context*/ ) {
logger.Debugw("Start MibDownload Msg processing", log.Fields{"for device-id": onuDeviceEntry.deviceID})
loop:
for {
// case <-ctx.Done():
// logger.Info("MibSync Msg", log.Fields{"Message handling canceled via context for device-id": onuDeviceEntry.deviceID})
// break loop
// unless multiple channels are not involved, we should not use select
message, ok := <-onuDeviceEntry.pMibDownloadFsm.commChan
if !ok {
logger.Info("MibDownload Rx Msg", log.Fields{"Message couldn't be read from channel for device-id": onuDeviceEntry.deviceID})
// but then we have to ensure a restart of the FSM as well - as exceptional procedure
_ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvRestart)
break loop
}
logger.Debugw("MibDownload Rx Msg", log.Fields{"Received message for device-id": onuDeviceEntry.deviceID})
switch message.Type {
case TestMsg:
msg, _ := message.Data.(TestMessage)
if msg.TestMessageVal == AbortMessageProcessing {
logger.Infow("MibDownload abort ProcessMsg", log.Fields{"for device-id": onuDeviceEntry.deviceID})
break loop
}
logger.Warnw("MibDownload unknown TestMessage", log.Fields{"device-id": onuDeviceEntry.deviceID, "MessageVal": msg.TestMessageVal})
case OMCI:
msg, _ := message.Data.(OmciMessage)
onuDeviceEntry.handleOmciMibDownloadMessage(msg)
default:
logger.Warn("MibDownload Rx Msg", log.Fields{"Unknown message type received for device-id": onuDeviceEntry.deviceID,
"message.Type": message.Type})
}
}
logger.Infow("End MibDownload Msg processing", log.Fields{"for device-id": onuDeviceEntry.deviceID})
}
func (onuDeviceEntry *OnuDeviceEntry) handleOmciMibDownloadMessage(msg OmciMessage) {
logger.Debugw("Rx OMCI MibDownload Msg", log.Fields{"device-id": onuDeviceEntry.deviceID,
"msgType": msg.OmciMsg.MessageType})
switch msg.OmciMsg.MessageType {
case omci.CreateResponseType:
{
msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeCreateResponse)
if msgLayer == nil {
logger.Errorw("Omci Msg layer could not be detected for CreateResponse", log.Fields{"device-id": onuDeviceEntry.deviceID})
return
}
msgObj, msgOk := msgLayer.(*omci.CreateResponse)
if !msgOk {
logger.Errorw("Omci Msg layer could not be assigned for CreateResponse", log.Fields{"device-id": onuDeviceEntry.deviceID})
return
}
logger.Debugw("CreateResponse Data", log.Fields{"device-id": onuDeviceEntry.deviceID, "data-fields": msgObj})
if msgObj.Result != me.Success {
logger.Errorw("Omci CreateResponse Error - later: drive FSM to abort state ?", log.Fields{"device-id": onuDeviceEntry.deviceID, "Error": msgObj.Result})
// possibly force FSM into abort or ignore some errors for some messages? store error for mgmt display?
return
}
// maybe there is a way of pushing the specific create response type generally to the FSM
// and let the FSM verify, if the response was according to current state
// and possibly store the element to DB and progress - maybe some future option ...
// but as that is not straightforward to me I insert the type checkes manually here
// and feed the FSM with only 'pre-defined' events ...
if msgObj.EntityClass == onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetClassID() &&
msgObj.EntityInstance == onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetEntityID() {
//store the created ME into DB //TODO??? obviously the Python code does not store the config ...
// if, then something like:
//onuDeviceEntry.pOnuDB.StoreMe(msgObj)
// maybe we can use just the same eventName for different state transitions like "forward"
// - might be checked, but so far I go for sure and have to inspect the concrete state events ...
switch onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetName() {
case "GalEthernetProfile":
{ // let the FSM proceed ...
_ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvRxGalResp)
}
case "MacBridgeServiceProfile",
"MacBridgePortConfigurationData",
"ExtendedVlanTaggingOperationConfigurationData":
{ // let bridge init proceed by stopping the wait function
onuDeviceEntry.omciMessageReceived <- true
}
}
}
} //CreateResponseType
//TODO
// onuDeviceEntry.pMibDownloadFsm.pFsm.Event("rx_evtocd_resp")
case omci.SetResponseType:
{
msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeSetResponse)
if msgLayer == nil {
logger.Errorw("Omci Msg layer could not be detected for SetResponse", log.Fields{"device-id": onuDeviceEntry.deviceID})
return
}
msgObj, msgOk := msgLayer.(*omci.SetResponse)
if !msgOk {
logger.Errorw("Omci Msg layer could not be assigned for SetResponse", log.Fields{"device-id": onuDeviceEntry.deviceID})
return
}
logger.Debugw("SetResponse Data", log.Fields{"device-id": onuDeviceEntry.deviceID, "data-fields": msgObj})
if msgObj.Result != me.Success {
logger.Errorw("Omci SetResponse Error - later: drive FSM to abort state ?", log.Fields{"device-id": onuDeviceEntry.deviceID,
"Error": msgObj.Result})
// possibly force FSM into abort or ignore some errors for some messages? store error for mgmt display?
return
}
// compare comments above for CreateResponse (apply also here ...)
if msgObj.EntityClass == onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetClassID() &&
msgObj.EntityInstance == onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetEntityID() {
//store the created ME into DB //TODO??? obviously the Python code does not store the config ...
// if, then something like:
//onuDeviceEntry.pOnuDB.StoreMe(msgObj)
switch onuDeviceEntry.PDevOmciCC.pLastTxMeInstance.GetName() {
case "Onu2G":
{ // let the FSM proceed ...
_ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvRxOnu2gResp)
}
//so far that was the only MibDownlad Set Element ...
}
}
} //SetResponseType
default:
{
logger.Errorw("Rx OMCI MibDownload unhandled MsgType", log.Fields{"device-id": onuDeviceEntry.deviceID,
"omciMsgType": msg.OmciMsg.MessageType})
return
}
} // switch msg.OmciMsg.MessageType
}
func (onuDeviceEntry *OnuDeviceEntry) performInitialBridgeSetup() {
for uniNo, uniPort := range onuDeviceEntry.baseDeviceHandler.uniEntityMap {
logger.Debugw("Starting IntialBridgeSetup", log.Fields{
"device-id": onuDeviceEntry.deviceID, "for PortNo": uniNo})
//create MBSP
meInstance := onuDeviceEntry.PDevOmciCC.sendCreateMBServiceProfile(
context.TODO(), uniPort, ConstDefaultOmciTimeout, true)
onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance
//verify response
err := onuDeviceEntry.waitforOmciResponse(meInstance)
if err != nil {
logger.Errorw("InitialBridgeSetup failed at MBSP, aborting MIB Download!",
log.Fields{"device-id": onuDeviceEntry.deviceID})
_ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvReset)
return
}
//create MBPCD
meInstance = onuDeviceEntry.PDevOmciCC.sendCreateMBPConfigData(
context.TODO(), uniPort, ConstDefaultOmciTimeout, true)
onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance
//verify response
err = onuDeviceEntry.waitforOmciResponse(meInstance)
if err != nil {
logger.Errorw("InitialBridgeSetup failed at MBPCD, aborting MIB Download!",
log.Fields{"device-id": onuDeviceEntry.deviceID})
_ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvReset)
return
}
//create EVTOCD
meInstance = onuDeviceEntry.PDevOmciCC.sendCreateEVTOConfigData(
context.TODO(), uniPort, ConstDefaultOmciTimeout, true)
onuDeviceEntry.PDevOmciCC.pLastTxMeInstance = meInstance
//verify response
err = onuDeviceEntry.waitforOmciResponse(meInstance)
if err != nil {
logger.Errorw("InitialBridgeSetup failed at EVTOCD, aborting MIB Download!",
log.Fields{"device-id": onuDeviceEntry.deviceID})
_ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvReset)
return
}
}
// if Config has been done for all UNI related instances let the FSM proceed
// while we did not check here, if there is some port at all - !?
logger.Infow("IntialBridgeSetup finished", log.Fields{"device-id": onuDeviceEntry.deviceID})
_ = onuDeviceEntry.pMibDownloadFsm.pFsm.Event(dlEvRxBridgeResp)
}
func (onuDeviceEntry *OnuDeviceEntry) waitforOmciResponse(apMeInstance *me.ManagedEntity) error {
select {
// maybe be also some outside cancel (but no context modeled for the moment ...)
// case <-ctx.Done():
// logger.Info("MibDownload-bridge-init message reception canceled", log.Fields{"for device-id": onuDeviceEntry.deviceID})
case <-time.After(30 * time.Second): //3s was detected to be to less in 8*8 bbsim test with debug Info/Debug
logger.Warnw("MibDownload-bridge-init timeout", log.Fields{"for device-id": onuDeviceEntry.deviceID})
return fmt.Errorf("mibDownloadBridgeInit timeout %s", onuDeviceEntry.deviceID)
case success := <-onuDeviceEntry.omciMessageReceived:
if success {
logger.Debug("MibDownload-bridge-init response received")
return nil
}
// should not happen so far
logger.Warnw("MibDownload-bridge-init response error", log.Fields{"for device-id": onuDeviceEntry.deviceID})
return fmt.Errorf("mibDownloadBridgeInit responseError %s", onuDeviceEntry.deviceID)
}
}