| /* |
| * Copyright 2020-2024 Open Networking Foundation (ONF) and the ONF Contributors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // Package core provides the utility for onu devices, flows and statistics |
| package core |
| |
| import ( |
| "context" |
| "errors" |
| "fmt" |
| "strconv" |
| "sync" |
| "time" |
| |
| "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/config" |
| |
| "github.com/gogo/protobuf/proto" |
| "github.com/looplab/fsm" |
| me "github.com/opencord/omci-lib-go/v2/generated" |
| "github.com/opencord/voltha-lib-go/v7/pkg/db" |
| "github.com/opencord/voltha-lib-go/v7/pkg/events/eventif" |
| flow "github.com/opencord/voltha-lib-go/v7/pkg/flows" |
| vgrpc "github.com/opencord/voltha-lib-go/v7/pkg/grpc" |
| "github.com/opencord/voltha-lib-go/v7/pkg/log" |
| platform "github.com/opencord/voltha-lib-go/v7/pkg/platform" |
| almgr "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/almgr" |
| avcfg "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/avcfg" |
| cmn "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/common" |
| mib "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/mib" |
| otst "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/omcitst" |
| pmmgr "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/pmmgr" |
| "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/swupg" |
| uniprt "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/uniprt" |
| "github.com/opencord/voltha-protos/v5/go/common" |
| vc "github.com/opencord/voltha-protos/v5/go/common" |
| ca "github.com/opencord/voltha-protos/v5/go/core_adapter" |
| "github.com/opencord/voltha-protos/v5/go/extension" |
| "github.com/opencord/voltha-protos/v5/go/inter_adapter" |
| ia "github.com/opencord/voltha-protos/v5/go/inter_adapter" |
| of "github.com/opencord/voltha-protos/v5/go/openflow_13" |
| "github.com/opencord/voltha-protos/v5/go/openolt" |
| oop "github.com/opencord/voltha-protos/v5/go/openolt" |
| "github.com/opencord/voltha-protos/v5/go/tech_profile" |
| "github.com/opencord/voltha-protos/v5/go/voltha" |
| "google.golang.org/grpc/codes" |
| "google.golang.org/grpc/status" |
| ) |
| |
| const ( |
| //constants for reconcile flow check channel |
| cWaitReconcileFlowAbortOnSuccess = 0xFFFD |
| cWaitReconcileFlowAbortOnError = 0xFFFE |
| cWaitReconcileFlowNoActivity = 0xFFFF |
| ) |
| |
| const ( |
| // constants for timeouts |
| cTimeOutRemoveUpgrade = 1 //for usage in seconds |
| ) |
| |
| const ( |
| // dummy constant - irregular value for ConnState - used to avoiding setting this state in the updateDeviceState() |
| // should better be defined in voltha protobuf or best solution would be to define an interface to just set the OperState |
| // as long as such is not available by the libraries - use this workaround |
| connectStatusINVALID = 255 // as long as not used as key in voltha.ConnectStatus_Types_name |
| ) |
| |
| const ( |
| // events of Device FSM |
| devEvDeviceInit = "devEvDeviceInit" |
| devEvGrpcConnected = "devEvGrpcConnected" |
| devEvGrpcDisconnected = "devEvGrpcDisconnected" |
| devEvDeviceUpInd = "devEvDeviceUpInd" |
| devEvDeviceDownInd = "devEvDeviceDownInd" |
| ) |
| const ( |
| // states of Device FSM |
| devStNull = "devStNull" |
| devStDown = "devStDown" |
| devStInit = "devStInit" |
| devStConnected = "devStConnected" |
| devStUp = "devStUp" |
| ) |
| |
| // Event category and subcategory definitions - same as defiend for OLT in eventmgr.go - should be done more centrally |
| const ( |
| pon = voltha.EventSubCategory_PON |
| //olt = voltha.EventSubCategory_OLT |
| //ont = voltha.EventSubCategory_ONT |
| //onu = voltha.EventSubCategory_ONU |
| //nni = voltha.EventSubCategory_NNI |
| //service = voltha.EventCategory_SERVICE |
| //security = voltha.EventCategory_SECURITY |
| equipment = voltha.EventCategory_EQUIPMENT |
| //processing = voltha.EventCategory_PROCESSING |
| //environment = voltha.EventCategory_ENVIRONMENT |
| //communication = voltha.EventCategory_COMMUNICATION |
| ) |
| |
| const ( |
| cEventObjectType = "ONU" |
| ) |
| const ( |
| cOnuActivatedEvent = "ONU_ACTIVATED" |
| ) |
| |
| type omciIdleCheckStruct struct { |
| omciIdleCheckFunc func(*deviceHandler, context.Context, cmn.UsedOmciConfigFsms, string) bool |
| omciIdleState string |
| } |
| |
| var fsmOmciIdleStateFuncMap = map[cmn.UsedOmciConfigFsms]omciIdleCheckStruct{ |
| cmn.CUploadFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, mib.CMibUlFsmIdleState}, |
| cmn.CDownloadFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, mib.CMibDlFsmIdleState}, |
| cmn.CUniLockFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, uniprt.CUniFsmIdleState}, |
| cmn.CUniUnLockFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, uniprt.CUniFsmIdleState}, |
| cmn.CAniConfigFsm: {(*deviceHandler).isAniConfigFsmInOmciIdleState, avcfg.CAniFsmIdleState}, |
| cmn.CUniVlanConfigFsm: {(*deviceHandler).isUniVlanConfigFsmInOmciIdleState, avcfg.CVlanFsmIdleState}, |
| cmn.CL2PmFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, pmmgr.CL2PmFsmIdleState}, |
| cmn.COnuUpgradeFsm: {(*deviceHandler).isFsmInOmciIdleStateDefault, swupg.COnuUpgradeFsmIdleState}, |
| } |
| |
| const ( |
| cNoReconciling = iota |
| cOnuConfigReconciling |
| cSkipOnuConfigReconciling |
| ) |
| |
| // FlowCb is the flow control block containing flow add/delete information along with a response channel |
| type FlowCb struct { |
| ctx context.Context // Flow handler context |
| addFlow bool // if true flow to be added, else removed |
| flowItem *of.OfpFlowStats |
| uniPort *cmn.OnuUniPort |
| flowMetaData *of.FlowMetadata |
| respChan *chan error // channel to report the Flow handling error |
| } |
| |
| // deviceHandler will interact with the ONU ? device. |
| type deviceHandler struct { |
| DeviceID string |
| DeviceType string |
| adminState string |
| device *voltha.Device |
| logicalDeviceID string |
| ProxyAddressID string |
| ProxyAddressType string |
| parentID string |
| ponPortNumber uint32 |
| |
| coreClient *vgrpc.Client |
| EventProxy eventif.EventProxy |
| |
| pmConfigs *voltha.PmConfigs |
| config *config.AdapterFlags |
| |
| pOpenOnuAc *OpenONUAC |
| pDeviceStateFsm *fsm.FSM |
| //pPonPort *voltha.Port |
| deviceEntrySet chan bool //channel for DeviceEntry set event |
| pOnuOmciDevice *mib.OnuDeviceEntry |
| pOnuTP *avcfg.OnuUniTechProf |
| pOnuMetricsMgr *pmmgr.OnuMetricsManager |
| pAlarmMgr *almgr.OnuAlarmManager |
| pSelfTestHdlr *otst.SelfTestControlBlock |
| exitChannel chan int |
| lockDevice sync.RWMutex |
| pOnuIndication *oop.OnuIndication |
| deviceReason uint8 |
| mutexDeviceReason sync.RWMutex |
| pLockStateFsm *uniprt.LockStateFsm |
| pUnlockStateFsm *uniprt.LockStateFsm |
| |
| //flowMgr *OpenOltFlowMgr |
| //eventMgr *OpenOltEventMgr |
| //resourceMgr *rsrcMgr.OpenOltResourceMgr |
| |
| //discOnus sync.Map |
| //onus sync.Map |
| //portStats *OpenOltStatisticsMgr |
| collectorIsRunning bool |
| mutexCollectorFlag sync.RWMutex |
| stopCollector chan bool |
| alarmManagerIsRunning bool |
| mutextAlarmManagerFlag sync.RWMutex |
| stopAlarmManager chan bool |
| stopHeartbeatCheck chan bool |
| uniEntityMap cmn.OnuUniPortMap |
| mutexKvStoreContext sync.Mutex |
| lockVlanConfig sync.RWMutex |
| lockVlanAdd sync.RWMutex |
| UniVlanConfigFsmMap map[uint8]*avcfg.UniVlanConfigFsm |
| lockUpgradeFsm sync.RWMutex |
| pOnuUpradeFsm *swupg.OnuUpgradeFsm |
| upgradeCanceled bool |
| reconciling uint8 |
| mutexReconcilingFlag sync.RWMutex |
| reconcilingFirstPass bool |
| mutexReconcilingFirstPassFlag sync.RWMutex |
| reconcilingReasonUpdate bool |
| mutexReconcilingReasonUpdate sync.RWMutex |
| chUniVlanConfigReconcilingDone chan uint16 //channel to indicate that VlanConfig reconciling for a specific UNI has been finished |
| chReconcilingFinished chan bool //channel to indicate that reconciling has been finished |
| reconcileExpiryComplete time.Duration |
| reconcileExpiryVlanConfig time.Duration |
| mutexReadyForOmciConfig sync.RWMutex |
| readyForOmciConfig bool |
| deletionInProgress bool |
| mutexDeletionInProgressFlag sync.RWMutex |
| pLastUpgradeImageState *voltha.ImageState |
| upgradeFsmChan chan struct{} |
| |
| flowCbChan []chan FlowCb |
| mutexFlowMonitoringRoutineFlag sync.RWMutex |
| mutexForDisableDeviceRequested sync.RWMutex |
| mutexOltAvailable sync.RWMutex |
| stopFlowMonitoringRoutine []chan bool // length of slice equal to number of uni ports |
| isFlowMonitoringRoutineActive []bool // length of slice equal to number of uni ports |
| disableDeviceRequested bool // this flag identify ONU received disable request or not |
| oltAvailable bool |
| deviceDeleteCommChan chan bool |
| } |
| |
| // newDeviceHandler creates a new device handler |
| func newDeviceHandler(ctx context.Context, cc *vgrpc.Client, ep eventif.EventProxy, device *voltha.Device, adapter *OpenONUAC) *deviceHandler { |
| var dh deviceHandler |
| dh.coreClient = cc |
| dh.EventProxy = ep |
| dh.config = adapter.config |
| cloned := (proto.Clone(device)).(*voltha.Device) |
| dh.DeviceID = cloned.Id |
| dh.DeviceType = cloned.Type |
| dh.adminState = "up" |
| dh.device = cloned |
| dh.pOpenOnuAc = adapter |
| dh.exitChannel = make(chan int, 1) |
| dh.lockDevice = sync.RWMutex{} |
| dh.deviceEntrySet = make(chan bool, 1) |
| dh.collectorIsRunning = false |
| dh.stopCollector = make(chan bool, 2) |
| dh.alarmManagerIsRunning = false |
| dh.stopAlarmManager = make(chan bool, 2) |
| dh.stopHeartbeatCheck = make(chan bool, 2) |
| //dh.metrics = pmmetrics.NewPmMetrics(cloned.Id, pmmetrics.Frequency(150), pmmetrics.FrequencyOverride(false), pmmetrics.Grouped(false), pmmetrics.Metrics(pmNames)) |
| //TODO initialize the support classes. |
| dh.uniEntityMap = make(map[uint32]*cmn.OnuUniPort) |
| dh.lockVlanConfig = sync.RWMutex{} |
| dh.lockVlanAdd = sync.RWMutex{} |
| dh.lockUpgradeFsm = sync.RWMutex{} |
| dh.mutexForDisableDeviceRequested = sync.RWMutex{} |
| dh.UniVlanConfigFsmMap = make(map[uint8]*avcfg.UniVlanConfigFsm) |
| dh.reconciling = cNoReconciling |
| dh.reconcilingReasonUpdate = false |
| dh.reconcilingFirstPass = true |
| dh.disableDeviceRequested = false |
| dh.oltAvailable = false |
| dh.chReconcilingFinished = make(chan bool) |
| dh.reconcileExpiryComplete = adapter.maxTimeoutReconciling //assumption is to have it as duration in s! |
| rECSeconds := int(dh.reconcileExpiryComplete / time.Second) |
| if rECSeconds < 2 { |
| dh.reconcileExpiryComplete = time.Duration(2) * time.Second //ensure a minimum expiry time of 2s for complete reconciling |
| rECSeconds = 2 |
| } |
| rEVCSeconds := rECSeconds / 2 |
| dh.reconcileExpiryVlanConfig = time.Duration(rEVCSeconds) * time.Second //set this duration to some according lower value |
| dh.readyForOmciConfig = false |
| dh.deletionInProgress = false |
| dh.pLastUpgradeImageState = &voltha.ImageState{ |
| DownloadState: voltha.ImageState_DOWNLOAD_UNKNOWN, |
| Reason: voltha.ImageState_UNKNOWN_ERROR, |
| ImageState: voltha.ImageState_IMAGE_UNKNOWN, |
| } |
| dh.upgradeFsmChan = make(chan struct{}) |
| dh.deviceDeleteCommChan = make(chan bool, 2) |
| |
| if dh.device.PmConfigs != nil { // can happen after onu adapter restart |
| dh.pmConfigs = cloned.PmConfigs |
| } /* else { |
| // will be populated when onu_metrics_mananger is initialized. |
| }*/ |
| |
| // Device related state machine |
| dh.pDeviceStateFsm = fsm.NewFSM( |
| devStNull, |
| fsm.Events{ |
| {Name: devEvDeviceInit, Src: []string{devStNull, devStDown}, Dst: devStInit}, |
| {Name: devEvGrpcConnected, Src: []string{devStInit}, Dst: devStConnected}, |
| {Name: devEvGrpcDisconnected, Src: []string{devStConnected, devStDown}, Dst: devStInit}, |
| {Name: devEvDeviceUpInd, Src: []string{devStConnected, devStDown}, Dst: devStUp}, |
| {Name: devEvDeviceDownInd, Src: []string{devStUp}, Dst: devStDown}, |
| }, |
| fsm.Callbacks{ |
| "before_event": func(e *fsm.Event) { dh.logStateChange(ctx, e) }, |
| ("before_" + devEvDeviceInit): func(e *fsm.Event) { dh.doStateInit(ctx, e) }, |
| ("after_" + devEvDeviceInit): func(e *fsm.Event) { dh.postInit(ctx, e) }, |
| ("before_" + devEvGrpcConnected): func(e *fsm.Event) { dh.doStateConnected(ctx, e) }, |
| ("before_" + devEvGrpcDisconnected): func(e *fsm.Event) { dh.doStateInit(ctx, e) }, |
| ("after_" + devEvGrpcDisconnected): func(e *fsm.Event) { dh.postInit(ctx, e) }, |
| ("before_" + devEvDeviceUpInd): func(e *fsm.Event) { dh.doStateUp(ctx, e) }, |
| ("before_" + devEvDeviceDownInd): func(e *fsm.Event) { dh.doStateDown(ctx, e) }, |
| }, |
| ) |
| |
| return &dh |
| } |
| |
| // start save the device to the data model |
| func (dh *deviceHandler) start(ctx context.Context) { |
| logger.Debugw(ctx, "starting-device-handler", log.Fields{"device": dh.device, "device-id": dh.DeviceID}) |
| // Add the initial device to the local model |
| logger.Debugw(ctx, "device-handler-started", log.Fields{"device": dh.device}) |
| } |
| |
| /* |
| // stop stops the device dh. Not much to do for now |
| func (dh *deviceHandler) stop(ctx context.Context) { |
| logger.Debug("stopping-device-handler") |
| dh.exitChannel <- 1 |
| } |
| */ |
| |
| // ########################################################################################## |
| // deviceHandler methods that implement the adapters interface requests ##### begin ######### |
| |
| // adoptOrReconcileDevice adopts the ONU device |
| func (dh *deviceHandler) adoptOrReconcileDevice(ctx context.Context, device *voltha.Device) { |
| logger.Debugw(ctx, "adopt_or_reconcile_device", log.Fields{"device-id": device.Id, "Address": device.GetHostAndPort()}) |
| |
| logger.Debugw(ctx, "Device FSM: ", log.Fields{"device-id": device.Id, "state": string(dh.pDeviceStateFsm.Current())}) |
| |
| if dh.pDeviceStateFsm.Is(devStNull) { |
| if err := dh.pDeviceStateFsm.Event(devEvDeviceInit); err != nil { |
| logger.Errorw(ctx, "Device FSM: Can't go to state DeviceInit", log.Fields{"device-id": device.Id, "err": err}) |
| } |
| logger.Debugw(ctx, "Device FSM: ", log.Fields{"device-id": device.Id, "state": string(dh.pDeviceStateFsm.Current())}) |
| // device.PmConfigs is not nil in cases when adapter restarts. We should not re-set the core again. |
| if device.PmConfigs == nil { |
| // Now, set the initial PM configuration for that device |
| if err := dh.updatePMConfigInCore(ctx, dh.pmConfigs); err != nil { |
| logger.Errorw(ctx, "error updating pm config to core", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } |
| } |
| } else { |
| logger.Debugw(ctx, "AdoptOrReconcileDevice: Agent/device init already done", log.Fields{"device-id": device.Id}) |
| } |
| |
| } |
| |
| func (dh *deviceHandler) handleOMCIIndication(ctx context.Context, msg *ia.OmciMessage) error { |
| /* msg print moved symmetrically to omci_cc, if wanted here as additional debug, than perhaps only based on additional debug setting! |
| //assuming omci message content is hex coded! |
| // with restricted output of 16(?) bytes would be ...omciMsg.Message[:16] |
| logger.Debugw(ctx, "inter-adapter-recv-omci", log.Fields{ |
| "device-id": dh.DeviceID, "RxOmciMessage": hex.EncodeToString(omciMsg.Message)}) |
| */ |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry != nil { |
| if pDevEntry.PDevOmciCC != nil { |
| return pDevEntry.PDevOmciCC.ReceiveMessage(log.WithSpanFromContext(context.TODO(), ctx), msg.Message) |
| } |
| logger.Debugw(ctx, "omciCC not ready to receive omci messages - incoming omci message ignored", log.Fields{"device-id": dh.DeviceID, |
| "rxMsg": msg.Message}) |
| } |
| logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice: %s", dh.DeviceID) |
| } |
| |
| func (dh *deviceHandler) handleTechProfileDownloadRequest(ctx context.Context, techProfMsg *ia.TechProfileDownloadMessage) error { |
| logger.Infow(ctx, "tech-profile-download-request", log.Fields{"device-id": dh.DeviceID}) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice: %s", dh.DeviceID) |
| } |
| if dh.pOnuTP == nil { |
| //should normally not happen ... |
| logger.Errorw(ctx, "onuTechProf instance not set up for DLMsg request - ignoring request", |
| log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("techProfile DLMsg request while onuTechProf instance not setup: %s", dh.DeviceID) |
| } |
| if !dh.IsReadyForOmciConfig() { |
| logger.Errorw(ctx, "TechProf-set rejected: improper device state", log.Fields{"device-id": dh.DeviceID, |
| "device-state": dh.GetDeviceReasonString()}) |
| return fmt.Errorf("improper device state %s on device %s", dh.GetDeviceReasonString(), dh.DeviceID) |
| } |
| //previous state test here was just this one, now extended for more states to reject the SetRequest: |
| // at least 'mib-downloaded' should be reached for processing of this specific ONU configuration |
| // if (dh.deviceReason == "stopping-openomci") || (dh.deviceReason == "omci-admin-lock") |
| |
| // we have to lock access to TechProfile processing based on different messageType calls or |
| // even to fast subsequent calls of the same messageType as well as OnuKVStore processing due |
| // to possible concurrent access by flow processing |
| dh.pOnuTP.LockTpProcMutex() |
| defer dh.pOnuTP.UnlockTpProcMutex() |
| |
| if techProfMsg.UniId >= platform.MaxUnisPerOnu { |
| return fmt.Errorf(fmt.Sprintf("received UniId value exceeds range: %d, device-id: %s", |
| techProfMsg.UniId, dh.DeviceID)) |
| } |
| uniID := uint8(techProfMsg.UniId) |
| tpID, err := cmn.GetTpIDFromTpPath(techProfMsg.TpInstancePath) |
| if err != nil { |
| logger.Errorw(ctx, "error-parsing-tpid-from-tppath", |
| log.Fields{"device-id": dh.DeviceID, "err": err, "tp-path": techProfMsg.TpInstancePath}) |
| return err |
| } |
| logger.Debugw(ctx, "unmarshal-techprof-msg-body", log.Fields{"device-id": dh.DeviceID, |
| "uniID": uniID, "tp-path": techProfMsg.TpInstancePath, "tpID": tpID}) |
| |
| if bTpModify := pDevEntry.UpdateOnuUniTpPath(ctx, uniID, uint8(tpID), techProfMsg.TpInstancePath); bTpModify { |
| |
| switch tpInst := techProfMsg.TechTpInstance.(type) { |
| case *ia.TechProfileDownloadMessage_TpInstance: |
| logger.Debugw(ctx, "onu-uni-tp-path-modified", log.Fields{"device-id": dh.DeviceID, |
| "uniID": uniID, "tp-path": techProfMsg.TpInstancePath, "tpID": tpID}) |
| |
| err = dh.CheckAvailableOnuCapabilities(ctx, pDevEntry, *tpInst.TpInstance) |
| if err != nil { |
| logger.Errorw(ctx, "error-checking-available-onu-capabilities-stopping-device", |
| log.Fields{"device-id": dh.DeviceID, "err": err, "tp-path": techProfMsg.TpInstancePath}) |
| // stopping all further processing |
| _ = dh.UpdateInterface(ctx) |
| return err |
| } |
| // if there has been some change for some uni TechProfilePath |
| //in order to allow concurrent calls to other dh instances we do not wait for execution here |
| //but doing so we can not indicate problems to the caller (who does what with that then?) |
| //by now we just assume straightforward successful execution |
| //TODO!!! Generally: In this scheme it would be good to have some means to indicate |
| // possible problems to the caller later autonomously |
| |
| // deadline context to ensure completion of background routines waited for |
| //20200721: 10s proved to be less in 8*8 ONU test on local vbox machine with debug, might be further adapted |
| deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution |
| dctx, cancel := context.WithDeadline(context.Background(), deadline) |
| |
| dh.pOnuTP.ResetTpProcessingErrorIndication(uniID, tpID) |
| |
| var wg sync.WaitGroup |
| wg.Add(1) // for the 1 go routine to finish |
| // attention: deadline completion check and wg.Done is to be done in both routines |
| go dh.pOnuTP.ConfigureUniTp(log.WithSpanFromContext(dctx, ctx), uniID, techProfMsg.TpInstancePath, *tpInst.TpInstance, &wg) |
| dh.waitForCompletion(ctx, cancel, &wg, "TechProfDwld") //wait for background process to finish |
| if tpErr := dh.pOnuTP.GetTpProcessingErrorIndication(uniID, tpID); tpErr != nil { |
| logger.Errorw(ctx, "error-processing-tp", log.Fields{"device-id": dh.DeviceID, "err": tpErr, "tp-path": techProfMsg.TpInstancePath}) |
| return tpErr |
| } |
| deadline = time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution |
| dctx2, cancel2 := context.WithDeadline(context.Background(), deadline) |
| defer cancel2() |
| err1 := pDevEntry.UpdateOnuKvStore(log.WithSpanFromContext(dctx2, ctx)) |
| if err1 != nil { |
| logger.Errorf(ctx, "UpdateOnuKvStore-failed", log.Fields{"device-id": dh.DeviceID, "error": err1}) |
| return err |
| } |
| return nil |
| default: |
| logger.Errorw(ctx, "unsupported-tp-instance-type", log.Fields{"device-id": dh.DeviceID, "tp-path": techProfMsg.TpInstancePath}) |
| return fmt.Errorf("unsupported-tp-instance-type--tp-id-%v", techProfMsg.TpInstancePath) |
| } |
| } |
| // no change, nothing really to do - return success |
| logger.Debugw(ctx, "onu-uni-tp-path-not-modified", log.Fields{"device-id": dh.DeviceID, |
| "uniID": uniID, "tp-path": techProfMsg.TpInstancePath, "tpID": tpID}) |
| return nil |
| } |
| |
| func (dh *deviceHandler) handleDeleteGemPortRequest(ctx context.Context, delGemPortMsg *ia.DeleteGemPortMessage) error { |
| logger.Infow(ctx, "delete-gem-port-request start", log.Fields{"device-id": dh.DeviceID}) |
| |
| if dh.pOnuTP == nil { |
| //should normally not happen ... |
| logger.Warnw(ctx, "onuTechProf instance not set up for DelGem request - ignoring request", |
| log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("techProfile DelGem request while onuTechProf instance not setup: %s", dh.DeviceID) |
| } |
| //compare TECH_PROFILE_DOWNLOAD_REQUEST |
| dh.pOnuTP.LockTpProcMutex() |
| defer dh.pOnuTP.UnlockTpProcMutex() |
| |
| if delGemPortMsg.UniId >= platform.MaxUnisPerOnu { |
| logger.Errorw(ctx, "delete-gem-port UniId exceeds range", log.Fields{ |
| "device-id": dh.DeviceID, "uni-id": delGemPortMsg.UniId}) |
| return fmt.Errorf(fmt.Sprintf("received UniId value exceeds range: %d, device-id: %s", |
| delGemPortMsg.UniId, dh.DeviceID)) |
| } |
| uniID := uint8(delGemPortMsg.UniId) |
| tpID, err := cmn.GetTpIDFromTpPath(delGemPortMsg.TpInstancePath) |
| if err != nil { |
| logger.Errorw(ctx, "error-extracting-tp-id-from-tp-path", log.Fields{ |
| "device-id": dh.DeviceID, "err": err, "tp-path": delGemPortMsg.TpInstancePath}) |
| return err |
| } |
| logger.Infow(ctx, "delete-gem-port-request", log.Fields{ |
| "device-id": dh.DeviceID, "uni-id": uniID, "tpID": tpID, "gem": delGemPortMsg.GemPortId}) |
| //a removal of some GemPort would never remove the complete TechProfile entry (done on T-Cont) |
| |
| return dh.deleteTechProfileResource(ctx, uniID, tpID, delGemPortMsg.TpInstancePath, |
| avcfg.CResourceGemPort, delGemPortMsg.GemPortId) |
| |
| } |
| |
| func (dh *deviceHandler) handleDeleteTcontRequest(ctx context.Context, delTcontMsg *ia.DeleteTcontMessage) error { |
| logger.Infow(ctx, "delete-tcont-request start", log.Fields{"device-id": dh.DeviceID, "uni-id": delTcontMsg.UniId, "tcont": delTcontMsg.AllocId}) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice: %s", dh.DeviceID) |
| } |
| if dh.pOnuTP == nil { |
| //should normally not happen ... |
| logger.Warnw(ctx, "onuTechProf instance not set up for DelTcont request - ignoring request", |
| log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("techProfile DelTcont request while onuTechProf instance not setup: %s", dh.DeviceID) |
| } |
| |
| //compare TECH_PROFILE_DOWNLOAD_REQUEST |
| dh.pOnuTP.LockTpProcMutex() |
| defer dh.pOnuTP.UnlockTpProcMutex() |
| |
| if delTcontMsg.UniId >= platform.MaxUnisPerOnu { |
| logger.Errorw(ctx, "delete-tcont UniId exceeds range", log.Fields{ |
| "device-id": dh.DeviceID, "uni-id": delTcontMsg.UniId}) |
| return fmt.Errorf(fmt.Sprintf("received UniId value exceeds range: %d, device-id: %s", |
| delTcontMsg.UniId, dh.DeviceID)) |
| } |
| uniID := uint8(delTcontMsg.UniId) |
| tpPath := delTcontMsg.TpInstancePath |
| tpID, err := cmn.GetTpIDFromTpPath(tpPath) |
| if err != nil { |
| logger.Errorw(ctx, "error-extracting-tp-id-from-tp-path", log.Fields{ |
| "device-id": dh.DeviceID, "err": err, "tp-path": tpPath}) |
| return err |
| } |
| pDevEntry.FreeTcont(ctx, uint16(delTcontMsg.AllocId)) |
| |
| deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution |
| dctx, cancel := context.WithDeadline(context.Background(), deadline) |
| defer cancel() |
| logger.Debugw(ctx, "remove-tcont-in-kv", log.Fields{"device-id": dh.DeviceID, "uni-id": uniID, "tpID": tpID, "tcont": delTcontMsg.AllocId}) |
| err1 := pDevEntry.UpdateOnuKvStore(log.WithSpanFromContext(dctx, ctx)) |
| if err1 != nil { |
| logger.Errorw(ctx, "UpdateOnuKvStore-failed", log.Fields{"device-id": dh.DeviceID, "err": err1}) |
| return err1 |
| } |
| |
| return dh.deleteTechProfileResource(ctx, uniID, tpID, delTcontMsg.TpInstancePath, |
| avcfg.CResourceTcont, delTcontMsg.AllocId) |
| |
| } |
| |
| func (dh *deviceHandler) deleteTechProfileResource(ctx context.Context, |
| uniID uint8, tpID uint8, pathString string, resource avcfg.ResourceEntry, entryID uint32) error { |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice: %s", dh.DeviceID) |
| } |
| var resourceName string |
| if avcfg.CResourceGemPort == resource { |
| resourceName = "Gem" |
| } else { |
| resourceName = "Tcont" |
| } |
| |
| // deadline context to ensure completion of background routines waited for |
| deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution |
| dctx, cancel := context.WithDeadline(context.Background(), deadline) |
| |
| dh.pOnuTP.ResetTpProcessingErrorIndication(uniID, tpID) |
| |
| var wg sync.WaitGroup |
| wg.Add(1) // for the 1 go routine to finish |
| go dh.pOnuTP.DeleteTpResource(log.WithSpanFromContext(dctx, ctx), uniID, tpID, pathString, |
| resource, entryID, &wg) |
| dh.waitForCompletion(ctx, cancel, &wg, resourceName+"Delete") //wait for background process to finish |
| if err := dh.pOnuTP.GetTpProcessingErrorIndication(uniID, tpID); err != nil { |
| logger.Errorw(ctx, err.Error(), log.Fields{"device-id": dh.DeviceID}) |
| return err |
| } |
| |
| if dh.pOnuTP.IsTechProfileConfigCleared(ctx, uniID, tpID) { |
| logger.Debugw(ctx, "techProfile-config-cleared", log.Fields{"device-id": dh.DeviceID, "uni-id": uniID, "tpID": tpID}) |
| if bTpModify := pDevEntry.UpdateOnuUniTpPath(ctx, uniID, tpID, ""); bTpModify { |
| pDevEntry.ResetKvProcessingErrorIndication() |
| dctx2, cancel2 := context.WithDeadline(context.Background(), deadline) |
| defer cancel2() |
| // Removal of the gem id mapping represents the removal of the tech profile |
| logger.Debugw(ctx, "remove-techProfile-indication-in-kv", log.Fields{"device-id": dh.DeviceID, "uni-id": uniID, "tpID": tpID}) |
| err := pDevEntry.UpdateOnuKvStore(log.WithSpanFromContext(dctx2, ctx)) |
| if err != nil { |
| logger.Errorw(ctx, "UpdateOnuKvStore-failed", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| return err |
| } |
| } |
| } |
| logger.Debugw(ctx, "delete-tech-profile-resource-completed", log.Fields{"device-id": dh.DeviceID, |
| "uni-id": uniID, "tpID": tpID, "resource-type": resourceName, "resource-id": entryID}) |
| return nil |
| } |
| |
| // FlowUpdateIncremental removes and/or adds the flow changes on a given device |
| func (dh *deviceHandler) FlowUpdateIncremental(ctx context.Context, |
| apOfFlowChanges *of.FlowChanges, |
| apOfGroupChanges *of.FlowGroupChanges, apFlowMetaData *of.FlowMetadata) error { |
| logger.Debugw(ctx, "FlowUpdateIncremental started", log.Fields{"device-id": dh.DeviceID, "flow": apOfFlowChanges, "metadata": apFlowMetaData}) |
| var errorsList []error |
| var retError error |
| //Remove flows (always remove flows first - remove old and add new with same cookie may be part of the same request) |
| if apOfFlowChanges.ToRemove != nil { |
| for _, flowItem := range apOfFlowChanges.ToRemove.Items { |
| if flowItem.GetCookie() == 0 { |
| logger.Warnw(ctx, "flow-remove no cookie: ignore and continuing on checking further flows", log.Fields{ |
| "device-id": dh.DeviceID}) |
| retError = fmt.Errorf("flow-remove no cookie, device-id %s", dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| continue |
| } |
| flowInPort := flow.GetInPort(flowItem) |
| if flowInPort == uint32(of.OfpPortNo_OFPP_INVALID) { |
| logger.Warnw(ctx, "flow-remove inPort invalid: ignore and continuing on checking further flows", log.Fields{"device-id": dh.DeviceID}) |
| retError = fmt.Errorf("flow-remove inPort invalid, device-id %s", dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| continue |
| //return fmt.Errorf("flow inPort invalid: %s", dh.DeviceID) |
| } else if flowInPort == dh.ponPortNumber { |
| //this is some downstream flow, not regarded as error, just ignored |
| logger.Debugw(ctx, "flow-remove for downstream: ignore and continuing on checking further flows", log.Fields{ |
| "device-id": dh.DeviceID, "inPort": flowInPort}) |
| continue |
| } else { |
| // this is the relevant upstream flow |
| var loUniPort *cmn.OnuUniPort |
| if uniPort, exist := dh.uniEntityMap[flowInPort]; exist { |
| loUniPort = uniPort |
| } else { |
| logger.Warnw(ctx, "flow-remove inPort not found in UniPorts: ignore and continuing on checking further flows", |
| log.Fields{"device-id": dh.DeviceID, "inPort": flowInPort}) |
| retError = fmt.Errorf("flow-remove inPort not found in UniPorts, inPort %d, device-id %s", |
| flowInPort, dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| continue |
| } |
| flowOutPort := flow.GetOutPort(flowItem) |
| logger.Debugw(ctx, "flow-remove port indications", log.Fields{ |
| "device-id": dh.DeviceID, "inPort": flowInPort, "outPort": flowOutPort, |
| "uniPortName": loUniPort.Name}) |
| |
| if dh.GetFlowMonitoringIsRunning(loUniPort.UniID) { |
| // Step1 : Fill flowControlBlock |
| // Step2 : Push the flowControlBlock to ONU channel |
| // Step3 : Wait on response channel for response |
| // Step4 : Return error value |
| startTime := time.Now() |
| respChan := make(chan error) |
| flowCb := FlowCb{ |
| ctx: ctx, |
| addFlow: false, |
| flowItem: flowItem, |
| flowMetaData: nil, |
| uniPort: loUniPort, |
| respChan: &respChan, |
| } |
| dh.flowCbChan[loUniPort.UniID] <- flowCb |
| logger.Infow(ctx, "process-flow-remove-start", log.Fields{"device-id": dh.DeviceID}) |
| // Wait on the channel for flow handlers return value |
| retError = <-respChan |
| logger.Infow(ctx, "process-flow-remove-end", log.Fields{"device-id": dh.DeviceID, "err": retError, "totalTimeSeconds": time.Since(startTime).Seconds()}) |
| if retError != nil { |
| logger.Warnw(ctx, "flow-delete processing error: continuing on checking further flows", |
| log.Fields{"device-id": dh.DeviceID, "error": retError}) |
| errorsList = append(errorsList, retError) |
| continue |
| } |
| } else { |
| retError = fmt.Errorf("flow-handler-routine-not-active-for-onu--device-id-%v", dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| } |
| } |
| } |
| } |
| if apOfFlowChanges.ToAdd != nil { |
| for _, flowItem := range apOfFlowChanges.ToAdd.Items { |
| if flowItem.GetCookie() == 0 { |
| logger.Debugw(ctx, "incremental flow-add no cookie: ignore and continuing on checking further flows", log.Fields{ |
| "device-id": dh.DeviceID}) |
| retError = fmt.Errorf("flow-add no cookie, device-id %s", dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| continue |
| } |
| flowInPort := flow.GetInPort(flowItem) |
| if flowInPort == uint32(of.OfpPortNo_OFPP_INVALID) { |
| logger.Warnw(ctx, "flow-add inPort invalid: ignore and continuing on checking further flows", log.Fields{"device-id": dh.DeviceID}) |
| retError = fmt.Errorf("flow-add inPort invalid, device-id %s", dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| continue |
| //return fmt.Errorf("flow inPort invalid: %s", dh.DeviceID) |
| } else if flowInPort == dh.ponPortNumber { |
| //this is some downstream flow |
| logger.Debugw(ctx, "flow-add for downstream: ignore and continuing on checking further flows", log.Fields{ |
| "device-id": dh.DeviceID, "inPort": flowInPort}) |
| continue |
| } else { |
| // this is the relevant upstream flow |
| var loUniPort *cmn.OnuUniPort |
| if uniPort, exist := dh.uniEntityMap[flowInPort]; exist { |
| loUniPort = uniPort |
| } else { |
| logger.Warnw(ctx, "flow-add inPort not found in UniPorts: ignore and continuing on checking further flows", |
| log.Fields{"device-id": dh.DeviceID, "inPort": flowInPort}) |
| retError = fmt.Errorf("flow-add inPort not found in UniPorts, inPort %d, device-id %s", |
| flowInPort, dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| continue |
| } |
| // let's still assume that we receive the flow-add only in some 'active' device state (as so far observed) |
| // if not, we just throw some error here to have an indication about that, if we really need to support that |
| // then we would need to create some means to activate the internal stored flows |
| // after the device gets active automatically (and still with its dependency to the TechProfile) |
| // for state checking compare also code here: processInterAdapterTechProfileDownloadReqMessage |
| // also abort for the other still possible flows here |
| if !dh.IsReadyForOmciConfig() { |
| logger.Errorw(ctx, "flow-add rejected: improper device state", log.Fields{"device-id": dh.DeviceID, |
| "last device-reason": dh.GetDeviceReasonString()}) |
| retError = fmt.Errorf("improper device state on device %s", dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| continue |
| } |
| |
| flowOutPort := flow.GetOutPort(flowItem) |
| logger.Debugw(ctx, "flow-add port indications", log.Fields{ |
| "device-id": dh.DeviceID, "inPort": flowInPort, "outPort": flowOutPort, |
| "uniPortName": loUniPort.Name}) |
| if dh.GetFlowMonitoringIsRunning(loUniPort.UniID) { |
| // Step1 : Fill flowControlBlock |
| // Step2 : Push the flowControlBlock to ONU channel |
| // Step3 : Wait on response channel for response |
| // Step4 : Return error value |
| startTime := time.Now() |
| respChan := make(chan error) |
| flowCb := FlowCb{ |
| ctx: ctx, |
| addFlow: true, |
| flowItem: flowItem, |
| flowMetaData: apFlowMetaData, |
| uniPort: loUniPort, |
| respChan: &respChan, |
| } |
| dh.flowCbChan[loUniPort.UniID] <- flowCb |
| logger.Infow(ctx, "process-flow-add-start", log.Fields{"device-id": dh.DeviceID}) |
| // Wait on the channel for flow handlers return value |
| retError = <-respChan |
| logger.Infow(ctx, "process-flow-add-end", log.Fields{"device-id": dh.DeviceID, "err": retError, "totalTimeSeconds": time.Since(startTime).Seconds()}) |
| if retError != nil { |
| logger.Warnw(ctx, "flow-add processing error: continuing on checking further flows", |
| log.Fields{"device-id": dh.DeviceID, "error": retError}) |
| errorsList = append(errorsList, retError) |
| continue |
| } |
| } else { |
| retError = fmt.Errorf("flow-handler-routine-not-active-for-onu--device-id-%v", dh.DeviceID) |
| errorsList = append(errorsList, retError) |
| } |
| } |
| } |
| } |
| if len(errorsList) > 0 { |
| logger.Errorw(ctx, "error-processing-flow", log.Fields{"device-id": dh.DeviceID, "errList": errorsList}) |
| return fmt.Errorf("errors-installing-one-or-more-flows-groups, errors:%v", errorsList) |
| } |
| return nil |
| } |
| |
| // disableDevice locks the ONU and its UNI/VEIP ports (admin lock via OMCI) |
| // following are the expected device states after this activity: |
| // Device Admin-State : down (on rwCore), Port-State: UNKNOWN, Conn-State: REACHABLE, Reason: omci-admin-lock |
| // (Conn-State: REACHABLE might conflict with some previous ONU Down indication - maybe to be resolved later) |
| func (dh *deviceHandler) disableDevice(ctx context.Context, device *voltha.Device) { |
| logger.Debugw(ctx, "disable-device", log.Fields{"device-id": device.Id, "SerialNumber": device.SerialNumber}) |
| dh.mutexForDisableDeviceRequested.Lock() |
| dh.disableDeviceRequested = true |
| dh.mutexForDisableDeviceRequested.Unlock() |
| //admin-lock reason can also be used uniquely for setting the DeviceState accordingly |
| //note that disableDevice sequences in some 'ONU active' state may yield also |
| // "tech...delete-success" or "omci-flow-deleted" according to further received requests in the end |
| // - inblock state checking to prevent possibly unneeded processing (on command repitition) |
| if dh.getDeviceReason() != cmn.DrOmciAdminLock { |
| //disable-device shall be just a UNi/ONU-G related admin state setting |
| //all other configurations/FSM's shall not be impacted and shall execute as required by the system |
| |
| if dh.IsReadyForOmciConfig() { |
| // disable UNI ports/ONU |
| // *** should generate UniDisableStateDone event - used to disable the port(s) on success |
| if dh.pLockStateFsm == nil { |
| dh.createUniLockFsm(ctx, true, cmn.UniDisableStateDone) |
| } else { //LockStateFSM already init |
| dh.pLockStateFsm.SetSuccessEvent(cmn.UniDisableStateDone) |
| dh.runUniLockFsm(ctx, true) |
| } |
| } else { |
| logger.Debugw(ctx, "DeviceStateUpdate upon disable", log.Fields{ |
| "OperStatus": voltha.OperStatus_UNKNOWN, "device-id": dh.DeviceID}) |
| // disable device should have no impact on ConnStatus |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: connectStatusINVALID, //use some dummy value to prevent modification of the ConnStatus |
| OperStatus: voltha.OperStatus_UNKNOWN, |
| }); err != nil { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing |
| logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| } |
| // DeviceReason to update acc.to modified py code as per beginning of Sept 2020 |
| |
| //TODO with VOL-3045/VOL-3046: catch and return error, valid for all occurrences in the codebase |
| _ = dh.ReasonUpdate(ctx, cmn.DrOmciAdminLock, true) |
| } |
| } |
| } |
| |
| // reEnableDevice unlocks the ONU and its UNI/VEIP ports (admin unlock via OMCI) |
| func (dh *deviceHandler) reEnableDevice(ctx context.Context, device *voltha.Device) { |
| logger.Debugw(ctx, "reenable-device", log.Fields{"device-id": device.Id, "SerialNumber": device.SerialNumber}) |
| |
| //setting readyForOmciConfig here is just a workaround for BBSIM testing in the sequence |
| // OnuSoftReboot-disable-enable, because BBSIM does not generate a new OnuIndication-Up event after SoftReboot |
| // which is the assumption for real ONU's, where the ready-state is then set according to the following MibUpload/Download |
| // for real ONU's that should have nearly no influence |
| // Note that for real ONU's there is anyway a problematic situation with following sequence: |
| // OnuIndication-Dw (or not active at all) (- disable) - enable: here already the LockFsm may run into timeout (no OmciResponse) |
| // but that anyway is hopefully resolved by some OnuIndication-Up event (maybe to be tested) |
| // one could also argue, that a device-enable should also enable attempts for specific omci configuration |
| dh.SetReadyForOmciConfig(true) //needed to allow subsequent flow/techProf config (on BBSIM) |
| |
| // enable ONU/UNI ports |
| // *** should generate cmn.UniEnableStateDone event - used to disable the port(s) on success |
| dh.mutexForDisableDeviceRequested.Lock() |
| dh.disableDeviceRequested = false |
| dh.mutexForDisableDeviceRequested.Unlock() |
| if dh.pUnlockStateFsm == nil { |
| dh.createUniLockFsm(ctx, false, cmn.UniEnableStateDone) |
| } else { //UnlockStateFSM already init |
| dh.pUnlockStateFsm.SetSuccessEvent(cmn.UniEnableStateDone) |
| dh.runUniLockFsm(ctx, false) |
| } |
| } |
| |
| func (dh *deviceHandler) reconcileDeviceOnuInd(ctx context.Context) { |
| logger.Info(ctx, "reconciling - simulate onu indication", log.Fields{"device-id": dh.DeviceID}) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| if err := pDevEntry.RestoreDataFromOnuKvStore(log.WithSpanFromContext(context.TODO(), ctx)); err != nil { |
| if err == fmt.Errorf("no-ONU-data-found") { |
| logger.Debugw(ctx, "no persistent data found - abort reconciling", log.Fields{"device-id": dh.DeviceID}) |
| } else { |
| logger.Errorw(ctx, "reconciling - restoring OnuTp-data failed - abort", log.Fields{"err": err, "device-id": dh.DeviceID}) |
| } |
| dh.stopReconciling(ctx, false, cWaitReconcileFlowNoActivity) |
| return |
| } |
| var onuIndication oop.OnuIndication |
| pDevEntry.MutexPersOnuConfig.RLock() |
| onuIndication.IntfId = pDevEntry.SOnuPersistentData.PersIntfID |
| onuIndication.OnuId = pDevEntry.SOnuPersistentData.PersOnuID |
| onuIndication.OperState = pDevEntry.SOnuPersistentData.PersOperState |
| onuIndication.AdminState = pDevEntry.SOnuPersistentData.PersAdminState |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| _ = dh.createInterface(ctx, &onuIndication) |
| } |
| |
| func (dh *deviceHandler) ReconcileDeviceTechProf(ctx context.Context) bool { |
| logger.Info(ctx, "reconciling - trigger tech profile config", log.Fields{"device-id": dh.DeviceID}) |
| |
| continueWithFlowConfig := false |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "reconciling - no valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, false, cWaitReconcileFlowNoActivity) |
| return continueWithFlowConfig |
| } |
| dh.pOnuTP.LockTpProcMutex() |
| defer dh.pOnuTP.UnlockTpProcMutex() |
| |
| pDevEntry.MutexPersOnuConfig.RLock() |
| persMutexLock := true |
| if len(pDevEntry.SOnuPersistentData.PersUniConfig) == 0 { |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| logger.Info(ctx, "reconciling - no uni-configs have been stored before adapter restart - terminate reconcilement", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, true, cWaitReconcileFlowNoActivity) |
| return continueWithFlowConfig |
| } |
| flowsFound := false |
| techProfsFound := false |
| techProfInstLoadFailed := false |
| outerLoop: |
| for _, uniData := range pDevEntry.SOnuPersistentData.PersUniConfig { |
| uniID := uniData.PersUniID |
| //TODO: check for uni-port specific reconcilement in case of multi-uni-port-per-onu-support |
| if !dh.anyTpPathExists(uniData.PersTpPathMap) { |
| logger.Debugw(ctx, "reconciling - no TPs stored for uniID", |
| log.Fields{"uni-id": uniID, "device-id": dh.DeviceID}) |
| continue |
| } |
| //release MutexPersOnuConfig before TechProfile (ANIConfig) processing as otherwise the reception of |
| // OMCI frames may get completely stuck due to lock request within IncrementMibDataSync() at OMCI |
| // frame reception may also lock the complete OMCI reception processing based on mutexRxSchedMap |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| persMutexLock = false |
| techProfsFound = true // set to true if we found TP once for any UNI port |
| var iaTechTpInst ia.TechProfileDownloadMessage |
| var ok bool |
| for tpID := range uniData.PersTpPathMap { |
| pDevEntry.MutexReconciledTpInstances.RLock() |
| if iaTechTpInst, ok = pDevEntry.ReconciledTpInstances[uniID][tpID]; !ok { |
| logger.Errorw(ctx, "reconciling - no reconciled tp instance available", |
| log.Fields{"tp-id": tpID, "tpPath": uniData.PersTpPathMap[tpID], "uni-id": uniData.PersUniID, |
| "device-id": dh.DeviceID}) |
| techProfInstLoadFailed = true // stop loading tp instance as soon as we hit failure |
| pDevEntry.MutexReconciledTpInstances.RUnlock() |
| break outerLoop |
| } |
| pDevEntry.MutexReconciledTpInstances.RUnlock() |
| continueWithFlowConfig = true // valid TP found - try flow configuration later |
| var tpInst tech_profile.TechProfileInstance |
| switch techTpInst := iaTechTpInst.TechTpInstance.(type) { |
| case *ia.TechProfileDownloadMessage_TpInstance: // supports only GPON, XGPON, XGS-PON |
| tpInst = *techTpInst.TpInstance |
| logger.Debugw(ctx, "reconciling - received-tp-instance-successfully-after-reconcile", log.Fields{ |
| "tp-id": tpID, "tpPath": uniData.PersTpPathMap[tpID], "uni-id": uniData.PersUniID, "device-id": dh.DeviceID}) |
| default: // do not support epon or other tech |
| logger.Errorw(ctx, "reconciling - unsupported-tech-profile", log.Fields{ |
| "tp-id": tpID, "tpPath": uniData.PersTpPathMap[tpID], "uni-id": uniData.PersUniID, "device-id": dh.DeviceID}) |
| techProfInstLoadFailed = true // stop loading tp instance as soon as we hit failure |
| break outerLoop |
| } |
| |
| // deadline context to ensure completion of background routines waited for |
| //20200721: 10s proved to be less in 8*8 ONU test on local vbox machine with debug, might be further adapted |
| deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution |
| dctx, cancel := context.WithDeadline(ctx, deadline) |
| |
| dh.pOnuTP.ResetTpProcessingErrorIndication(uniData.PersUniID, tpID) |
| var wg sync.WaitGroup |
| wg.Add(1) // for the 1 go routine to finish |
| go dh.pOnuTP.ConfigureUniTp(log.WithSpanFromContext(dctx, ctx), uniData.PersUniID, uniData.PersTpPathMap[tpID], tpInst, &wg) |
| dh.waitForCompletion(ctx, cancel, &wg, "TechProfReconcile") //wait for background process to finish |
| if err := dh.pOnuTP.GetTpProcessingErrorIndication(uniData.PersUniID, tpID); err != nil { |
| logger.Errorw(ctx, err.Error(), log.Fields{"device-id": dh.DeviceID}) |
| techProfInstLoadFailed = true // stop loading tp instance as soon as we hit failure |
| break outerLoop |
| } |
| } // for all TpPath entries for this UNI |
| if len(uniData.PersFlowParams) != 0 { |
| flowsFound = true |
| } |
| pDevEntry.MutexPersOnuConfig.RLock() //set protection again for loop test on SOnuPersistentData |
| persMutexLock = true |
| } // for all UNI entries from SOnuPersistentData |
| if persMutexLock { // if loop was left with MutexPersOnuConfig still set |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| } |
| |
| //had to move techProf/flow result evaluation into separate function due to SCA complexity limit |
| dh.updateReconcileStates(ctx, techProfsFound, techProfInstLoadFailed, flowsFound) |
| |
| return continueWithFlowConfig |
| } |
| |
| func (dh *deviceHandler) updateReconcileStates(ctx context.Context, |
| abTechProfsFound bool, abTechProfInstLoadFailed bool, abFlowsFound bool) { |
| if !abTechProfsFound { |
| logger.Warn(ctx, "reconciling - no TPs have been stored before adapter restart - terminate reconcilement", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, true, cWaitReconcileFlowNoActivity) |
| return |
| } |
| if abTechProfInstLoadFailed { |
| _ = dh.ReasonUpdate(ctx, cmn.DrTechProfileConfigDownloadFailed, dh.IsReconcilingReasonUpdate()) |
| dh.stopReconciling(ctx, false, cWaitReconcileFlowNoActivity) |
| return |
| } else if dh.IsSkipOnuConfigReconciling() { |
| _ = dh.ReasonUpdate(ctx, cmn.DrTechProfileConfigDownloadSuccess, dh.IsReconcilingReasonUpdate()) |
| } |
| if !abFlowsFound { |
| logger.Warn(ctx, "reconciling - no flows have been stored before adapter restart - terminate reconcilement", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, true, cWaitReconcileFlowNoActivity) |
| } |
| } |
| |
| func (dh *deviceHandler) ReconcileDeviceFlowConfig(ctx context.Context) { |
| logger.Debugw(ctx, "reconciling - trigger flow config", log.Fields{"device-id": dh.DeviceID}) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "reconciling - no valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, false, cWaitReconcileFlowNoActivity) |
| return |
| } |
| |
| pDevEntry.MutexPersOnuConfig.RLock() |
| if len(pDevEntry.SOnuPersistentData.PersUniConfig) == 0 { |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| logger.Warn(ctx, "reconciling - no uni-configs have been stored before adapter restart - terminate reconcilement", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, true, cWaitReconcileFlowNoActivity) |
| return |
| } |
| flowsFound := false |
| var uniVlanConfigEntries []uint8 |
| var loWaitGroupWTO cmn.WaitGroupWithTimeOut |
| |
| for _, uniData := range pDevEntry.SOnuPersistentData.PersUniConfig { |
| //TODO: check for uni-port specific reconcilement in case of multi-uni-port-per-onu-support |
| if len(uniData.PersFlowParams) == 0 { |
| logger.Debugw(ctx, "reconciling - no flows stored for uniID", |
| log.Fields{"uni-id": uniData.PersUniID, "device-id": dh.DeviceID}) |
| continue |
| } |
| if !dh.anyTpPathExists(uniData.PersTpPathMap) { |
| logger.Warnw(ctx, "reconciling flows - but no TPs stored for uniID, abort", |
| log.Fields{"uni-id": uniData.PersUniID, "device-id": dh.DeviceID}) |
| // It doesn't make sense to configure any flows if no TPs are available |
| continue |
| } |
| //release MutexPersOnuConfig before VlanConfig processing as otherwise the reception of |
| // OMCI frames may get completely stuck due to lock request within IncrementMibDataSync() at OMCI |
| // frame reception may also lock the complete OMCI reception processing based on mutexRxSchedMap |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| |
| var uniPort *cmn.OnuUniPort |
| var exist bool |
| uniNo := platform.MkUniPortNum(ctx, dh.pOnuIndication.GetIntfId(), dh.pOnuIndication.GetOnuId(), uint32(uniData.PersUniID)) |
| if uniPort, exist = dh.uniEntityMap[uniNo]; !exist { |
| logger.Errorw(ctx, "reconciling - OnuUniPort data not found - terminate reconcilement", |
| log.Fields{"uniNo": uniNo, "device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, false, cWaitReconcileFlowNoActivity) |
| return |
| } |
| //needed to split up function due to sca complexity |
| dh.updateReconcileFlowConfig(ctx, uniPort, uniData.PersFlowParams, uniVlanConfigEntries, &loWaitGroupWTO, &flowsFound) |
| |
| logger.Debugw(ctx, "reconciling - flows processed", log.Fields{ |
| "device-id": dh.DeviceID, "uni-id": uniData.PersUniID, |
| "NumUniFlows": dh.UniVlanConfigFsmMap[uniData.PersUniID].NumUniFlows, |
| "ConfiguredUniFlow": dh.UniVlanConfigFsmMap[uniData.PersUniID].ConfiguredUniFlow}) |
| // this can't be used as global finished reconciling flag because |
| // assumes is getting called before the state machines for the last flow is completed, |
| // while this is not guaranteed. |
| pDevEntry.MutexPersOnuConfig.RLock() //set protection again for loop test on SOnuPersistentData |
| } // for all UNI entries from SOnuPersistentData |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| |
| if !flowsFound { |
| logger.Warn(ctx, "reconciling - no flows have been stored before adapter restart - terminate reconcilement", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, true, cWaitReconcileFlowNoActivity) |
| return |
| } |
| logger.Debugw(ctx, "reconciling flows - waiting on ready indication of requested UNIs", log.Fields{ |
| "device-id": dh.DeviceID, "expiry": dh.reconcileExpiryVlanConfig}) |
| if executed := loWaitGroupWTO.WaitTimeout(dh.reconcileExpiryVlanConfig); executed { |
| logger.Debugw(ctx, "reconciling flows for all UNI's has been finished in time", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, true, cWaitReconcileFlowAbortOnSuccess) |
| if pDevEntry != nil { |
| pDevEntry.SendChReconcilingFlowsFinished(ctx, true) |
| } |
| } else { |
| logger.Errorw(ctx, "reconciling - timeout waiting for reconciling flows for all UNI's to be finished!", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, false, cWaitReconcileFlowAbortOnError) |
| if pDevEntry != nil { |
| pDevEntry.SendChReconcilingFlowsFinished(ctx, false) |
| } |
| return |
| } |
| _ = dh.ReasonUpdate(ctx, cmn.DrOmciFlowsPushed, dh.IsReconcilingReasonUpdate()) |
| } |
| |
| func (dh *deviceHandler) updateReconcileFlowConfig(ctx context.Context, apUniPort *cmn.OnuUniPort, |
| aPersFlowParam []cmn.UniVlanFlowParams, aUniVlanConfigEntries []uint8, |
| apWaitGroup *cmn.WaitGroupWithTimeOut, apFlowsFound *bool) { |
| flowsProcessed := 0 |
| lastFlowToReconcile := false |
| loUniID := apUniPort.UniID |
| for _, flowData := range aPersFlowParam { |
| if !(*apFlowsFound) { |
| *apFlowsFound = true |
| syncChannel := make(chan struct{}) |
| // start go routine with select() on reconciling vlan config channel before |
| // starting vlan config reconciling process to prevent loss of any signal |
| // this routine just collects all the received 'flow-reconciled' signals - possibly from different UNI's |
| go dh.waitOnUniVlanConfigReconcilingReady(ctx, syncChannel, apWaitGroup) |
| //block until the wait routine is really blocked on channel input |
| // in order to prevent to early ready signal from VlanConfig processing |
| <-syncChannel |
| } |
| if flowsProcessed == len(aPersFlowParam)-1 { |
| var uniAdded bool |
| lastFlowToReconcile = true |
| if aUniVlanConfigEntries, uniAdded = dh.appendIfMissing(aUniVlanConfigEntries, loUniID); uniAdded { |
| apWaitGroup.Add(1) //increment the waiting group |
| } |
| } |
| logger.Debugw(ctx, "reconciling - add flow with cookie slice", log.Fields{ |
| "device-id": dh.DeviceID, "uni-id": loUniID, |
| "flowsProcessed": flowsProcessed, "cookies": flowData.CookieSlice}) |
| dh.lockVlanConfig.Lock() |
| //the CookieSlice can be passed 'by value' here, - which internally passes its reference |
| if _, exist := dh.UniVlanConfigFsmMap[loUniID]; exist { |
| if err := dh.UniVlanConfigFsmMap[loUniID].SetUniFlowParams(ctx, flowData.VlanRuleParams.TpID, |
| flowData.CookieSlice, uint16(flowData.VlanRuleParams.MatchVid), uint8(flowData.VlanRuleParams.MatchPcp), uint16(flowData.VlanRuleParams.SetVid), uint8(flowData.VlanRuleParams.SetPcp), flowData.VlanRuleParams.InnerCvlan, lastFlowToReconcile, flowData.Meter, nil); err != nil { |
| logger.Errorw(ctx, err.Error(), log.Fields{"device-id": dh.DeviceID}) |
| } |
| } else { |
| if err := dh.createVlanFilterFsm(ctx, apUniPort, flowData.VlanRuleParams.TpID, flowData.CookieSlice, |
| uint16(flowData.VlanRuleParams.MatchVid), uint8(flowData.VlanRuleParams.MatchPcp), uint16(flowData.VlanRuleParams.SetVid), |
| uint8(flowData.VlanRuleParams.SetPcp), flowData.VlanRuleParams.InnerCvlan, cmn.OmciVlanFilterAddDone, lastFlowToReconcile, flowData.Meter, nil); err != nil { |
| logger.Errorw(ctx, err.Error(), log.Fields{"device-id": dh.DeviceID}) |
| } |
| } |
| dh.lockVlanConfig.Unlock() |
| flowsProcessed++ |
| } //for all flows of this UNI |
| } |
| |
| // waitOnUniVlanConfigReconcilingReady collects all VlanConfigReady signals from VlanConfig FSM processing in reconciling |
| // |
| // and decrements the according handler wait group waiting for these indications |
| func (dh *deviceHandler) waitOnUniVlanConfigReconcilingReady(ctx context.Context, aSyncChannel chan<- struct{}, |
| waitGroup *cmn.WaitGroupWithTimeOut) { |
| var reconciledUniVlanConfigEntries []uint8 |
| var appended bool |
| expiry := dh.GetReconcileExpiryVlanConfigAbort() |
| logger.Debugw(ctx, "start waiting on reconcile vlanConfig ready indications", log.Fields{ |
| "device-id": dh.DeviceID, "expiry": expiry}) |
| // indicate blocking on channel now to the caller |
| aSyncChannel <- struct{}{} |
| for { |
| select { |
| case uniIndication := <-dh.chUniVlanConfigReconcilingDone: |
| switch uniIndication { |
| // no activity requested (should normally not be received) - just continue waiting |
| case cWaitReconcileFlowNoActivity: |
| // waiting on channel inputs from VlanConfig for all UNI's to be aborted on error condition |
| case cWaitReconcileFlowAbortOnError: |
| logger.Warn(ctx, "waitReconcileFlow aborted on error", |
| log.Fields{"device-id": dh.DeviceID, "rxEntries": reconciledUniVlanConfigEntries}) |
| return |
| // waiting on channel inputs from VlanConfig for all UNI's to be aborted on success condition |
| case cWaitReconcileFlowAbortOnSuccess: |
| logger.Warn(ctx, "waitReconcileFlow aborted on success", |
| log.Fields{"device-id": dh.DeviceID, "rxEntries": reconciledUniVlanConfigEntries}) |
| return |
| // this should be a valid UNI vlan config done indication |
| default: |
| if uniIndication < platform.MaxUnisPerOnu { |
| logger.Info(ctx, "reconciling flows has been finished in time for this UNI", |
| log.Fields{"device-id": dh.DeviceID, "uni-id": uniIndication}) |
| if reconciledUniVlanConfigEntries, appended = |
| dh.appendIfMissing(reconciledUniVlanConfigEntries, uint8(uniIndication)); appended { |
| waitGroup.Done() |
| } |
| } else { |
| logger.Errorw(ctx, "received unexpected UNI flowConfig done indication - is ignored", log.Fields{"device-id": dh.DeviceID, "uni-id": uniIndication}) |
| } |
| } //switch uniIndication |
| |
| case <-time.After(expiry): //a bit longer than reconcileExpiryVlanConfig |
| logger.Errorw(ctx, "timeout waiting for reconciling all UNI flows to be finished!", |
| log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| } |
| } |
| |
| func (dh *deviceHandler) GetReconcileExpiryVlanConfigAbort() time.Duration { |
| return dh.reconcileExpiryVlanConfig + (500 * time.Millisecond) |
| } |
| |
| func (dh *deviceHandler) appendIfMissing(slice []uint8, val uint8) ([]uint8, bool) { |
| for _, ele := range slice { |
| if ele == val { |
| return slice, false |
| } |
| } |
| return append(slice, val), true |
| } |
| |
| // sendChReconcileFinished - sends true or false on reconcileFinish channel |
| func (dh *deviceHandler) sendChReconcileFinished(success bool) { |
| if dh != nil { //if the object still exists (might have been already deleted in background) |
| //use asynchronous channel sending to avoid stucking on non-waiting receiver |
| select { |
| case dh.chReconcilingFinished <- success: |
| default: |
| } |
| } |
| } |
| |
| // SendChUniVlanConfigFinished - sends the Uni number on channel if the flow reconcilement for this UNI is finished |
| func (dh *deviceHandler) SendChUniVlanConfigFinished(value uint16) { |
| if dh != nil { //if the object still exists (might have been already deleted in background) |
| //use asynchronous channel sending to avoid stucking on non-waiting receiver |
| select { |
| case dh.chUniVlanConfigReconcilingDone <- value: |
| default: |
| } |
| } |
| } |
| |
| func (dh *deviceHandler) deleteDevicePersistencyData(ctx context.Context) error { |
| logger.Debugw(ctx, "delete device persistency data", log.Fields{"device-id": dh.DeviceID}) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| //IfDevEntry does not exist here, no problem - no persistent data should have been stored |
| logger.Debugw(ctx, "OnuDevice does not exist - nothing to delete", log.Fields{"device-id": dh.DeviceID}) |
| return nil |
| } |
| |
| // deadline context to ensure completion of background routines waited for |
| //20200721: 10s proved to be less in 8*8 ONU test on local vbox machine with debug, might be further adapted |
| deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution |
| dctx, cancel := context.WithDeadline(ctx, deadline) |
| defer cancel() |
| err := pDevEntry.DeleteDataFromOnuKvStore(log.WithSpanFromContext(dctx, ctx)) |
| if err != nil { |
| logger.Errorw(ctx, "delete data from onu kv store failed", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| return err |
| } |
| return nil |
| } |
| |
| // func (dh *deviceHandler) rebootDevice(ctx context.Context, device *voltha.Device) error { |
| // before this change here return like this was used: |
| // |
| // return fmt.Errorf("device-unreachable: %s, %s", dh.DeviceID, device.SerialNumber) |
| // |
| // was and is called in background - error return does not make sense |
| func (dh *deviceHandler) rebootDevice(ctx context.Context, aCheckDeviceState bool, device *voltha.Device) { |
| logger.Infow(ctx, "reboot-device", log.Fields{"device-id": dh.DeviceID, "SerialNumber": dh.device.SerialNumber}) |
| if aCheckDeviceState && device.ConnectStatus != voltha.ConnectStatus_REACHABLE { |
| logger.Errorw(ctx, "device-unreachable", log.Fields{"device-id": device.Id, "SerialNumber": device.SerialNumber}) |
| return |
| } |
| if err := dh.pOnuOmciDevice.Reboot(log.WithSpanFromContext(context.TODO(), ctx)); err != nil { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing |
| logger.Errorw(ctx, "error-rebooting-device", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| return |
| } |
| |
| //transfer the possibly modified logical uni port state |
| dh.DisableUniPortStateUpdate(ctx) |
| |
| logger.Debugw(ctx, "call DeviceStateUpdate upon reboot", log.Fields{ |
| "OperStatus": voltha.OperStatus_DISCOVERED, "device-id": dh.DeviceID}) |
| // do not set the ConnStatus here as it may conflict with the parallel setting from ONU down indication (updateInterface()) |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: connectStatusINVALID, //use some dummy value to prevent modification of the ConnStatus |
| OperStatus: voltha.OperStatus_DISCOVERED, |
| }); err != nil { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing |
| logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| return |
| } |
| if err := dh.ReasonUpdate(ctx, cmn.DrRebooting, true); err != nil { |
| return |
| } |
| dh.SetReadyForOmciConfig(false) |
| //no specific activity to synchronize any internal FSM to the 'rebooted' state is explicitly done here |
| // the expectation ids for a real device, that it will be synced with the expected following 'down' indication |
| // as BBSIM does not support this testing requires explicite disable/enable device calls in which sequence also |
| // all other FSM's should be synchronized again |
| } |
| |
| // doOnuSwUpgrade initiates the SW download transfer to the ONU and on success activates the (inactive) image |
| // |
| // used only for old - R2.7 style - upgrade API |
| func (dh *deviceHandler) doOnuSwUpgrade(ctx context.Context, apImageDsc *voltha.ImageDownload, |
| apDownloadManager *swupg.AdapterDownloadManager) error { |
| logger.Debugw(ctx, "onuSwUpgrade requested", log.Fields{ |
| "device-id": dh.DeviceID, "image-name": (*apImageDsc).Name}) |
| |
| var err error |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "start Onu SW upgrade rejected: no valid OnuDevice", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("start Onu SW upgrade rejected: no valid OnuDevice for device-id: %s", dh.DeviceID) |
| } |
| |
| if dh.IsReadyForOmciConfig() { |
| var inactiveImageID uint16 |
| if inactiveImageID, err = pDevEntry.GetInactiveImageMeID(ctx); err == nil { |
| dh.lockUpgradeFsm.Lock() |
| //lockUpgradeFsm must be release before cancellation as this may implicitly request RemoveOnuUpgradeFsm() |
| // but must be still locked at calling createOnuUpgradeFsm |
| if dh.pOnuUpradeFsm == nil { |
| err = dh.createOnuUpgradeFsm(ctx, pDevEntry, cmn.OmciOnuSwUpgradeDone) |
| dh.lockUpgradeFsm.Unlock() |
| if err == nil { |
| if err = dh.pOnuUpradeFsm.SetDownloadParams(ctx, inactiveImageID, apImageDsc, apDownloadManager); err != nil { |
| logger.Errorw(ctx, "onu upgrade fsm could not set parameters", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| } |
| } else { |
| logger.Errorw(ctx, "onu upgrade fsm could not be created", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| } |
| } else { //OnuSw upgrade already running - restart (with possible abort of running) |
| dh.lockUpgradeFsm.Unlock() |
| logger.Debugw(ctx, "Onu SW upgrade already running - abort", log.Fields{"device-id": dh.DeviceID}) |
| if !dh.upgradeCanceled { //avoid double cancelation in case it is already doing the cancelation |
| dh.upgradeCanceled = true |
| dh.pOnuUpradeFsm.CancelProcessing(ctx, true, voltha.ImageState_CANCELLED_ON_REQUEST) //complete abort |
| } |
| //no effort spent anymore for the old API to automatically cancel and restart the download |
| // like done for the new API |
| } |
| } else { |
| logger.Errorw(ctx, "start Onu SW upgrade rejected: no inactive image", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| } |
| } else { |
| logger.Errorw(ctx, "start Onu SW upgrade rejected: no active OMCI connection", log.Fields{"device-id": dh.DeviceID}) |
| err = fmt.Errorf("start Onu SW upgrade rejected: no active OMCI connection for device-id: %s", dh.DeviceID) |
| } |
| return err |
| } |
| |
| // onuSwUpgradeAfterDownload initiates the SW download transfer to the ONU with activate and commit options |
| // after the OnuImage has been downloaded to the adapter, called in background |
| func (dh *deviceHandler) onuSwUpgradeAfterDownload(ctx context.Context, apImageRequest *voltha.DeviceImageDownloadRequest, |
| apDownloadManager *swupg.FileDownloadManager, aImageIdentifier string) { |
| |
| var err error |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "start Onu SW upgrade rejected: no valid OnuDevice", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| |
| var inactiveImageID uint16 |
| if inactiveImageID, err = pDevEntry.GetInactiveImageMeID(ctx); err == nil { |
| logger.Debugw(ctx, "onuSwUpgrade requested", log.Fields{ |
| "device-id": dh.DeviceID, "image-version": apImageRequest.Image.Version, "to onu-image": inactiveImageID}) |
| |
| dh.lockUpgradeFsm.Lock() |
| //lockUpgradeFsm must be release before cancellation as this may implicitly request RemoveOnuUpgradeFsm() |
| // but must be still locked at calling createOnuUpgradeFsm |
| // (and working with a local pointer copy does not work here if asynchronous request are done to fast |
| // [e.g.leaving the local pointer on nil even though a creation is already on the way]) |
| if dh.pOnuUpradeFsm != nil { |
| //OnuSw upgrade already running on this device (e.g. with activate/commit not yet set) |
| // abort the current processing, running upgrades are always aborted by newer request |
| logger.Debugw(ctx, "Onu SW upgrade already running - abort previous activity", log.Fields{"device-id": dh.DeviceID}) |
| //flush the remove upgradeFsmChan channel |
| select { |
| case <-dh.upgradeFsmChan: |
| logger.Debugw(ctx, "flushed-upgrade-fsm-channel", log.Fields{"device-id": dh.DeviceID}) |
| default: |
| } |
| dh.lockUpgradeFsm.Unlock() |
| if !dh.upgradeCanceled { //avoid double cancelation in case it is already doing the cancelation |
| dh.upgradeCanceled = true |
| dh.pOnuUpradeFsm.CancelProcessing(ctx, true, voltha.ImageState_CANCELLED_ON_REQUEST) //complete abort |
| } |
| select { |
| case <-time.After(cTimeOutRemoveUpgrade * time.Second): |
| logger.Errorw(ctx, "could not remove Upgrade FSM in time, aborting", log.Fields{"device-id": dh.DeviceID}) |
| //should not appear, can't proceed with new upgrade, perhaps operator can retry manually later |
| return |
| case <-dh.upgradeFsmChan: |
| logger.Debugw(ctx, "recent Upgrade FSM removed, proceed with new request", log.Fields{"device-id": dh.DeviceID}) |
| } |
| dh.lockUpgradeFsm.Lock() //lock again for following creation |
| } |
| |
| //here it can be assumed that no running upgrade processing exists (anymore) |
| //OmciOnuSwUpgradeDone could be used to create some event notification with information on upgrade completion, |
| // but none yet defined |
| err = dh.createOnuUpgradeFsm(ctx, pDevEntry, cmn.OmciOnuSwUpgradeDone) |
| dh.lockUpgradeFsm.Unlock() |
| if err == nil { |
| if err = dh.pOnuUpradeFsm.SetDownloadParamsAfterDownload(ctx, inactiveImageID, |
| apImageRequest, apDownloadManager, aImageIdentifier); err != nil { |
| logger.Errorw(ctx, "onu upgrade fsm could not set parameters", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| return |
| } |
| } else { |
| logger.Errorw(ctx, "onu upgrade fsm could not be created", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| } |
| return |
| } |
| logger.Errorw(ctx, "start Onu SW upgrade rejected: no inactive image", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| } |
| |
| // onuSwActivateRequest ensures activation of the requested image with commit options |
| func (dh *deviceHandler) onuSwActivateRequest(ctx context.Context, |
| aVersion string, aCommitRequest bool) (*voltha.ImageState, error) { |
| var err error |
| //SW activation for the ONU image may have two use cases, one of them is selected here according to following prioritization: |
| // 1.) activation of the image for a started upgrade process (in case the running upgrade runs on the requested image) |
| // 2.) activation of the inactive image |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "Onu image activation rejected: no valid OnuDevice", log.Fields{"device-id": dh.DeviceID}) |
| return nil, fmt.Errorf("no valid OnuDevice for device-id: %s", dh.DeviceID) |
| } |
| dh.lockUpgradeFsm.RLock() |
| if dh.pOnuUpradeFsm != nil { |
| dh.lockUpgradeFsm.RUnlock() |
| onuVolthaDevice, getErr := dh.getDeviceFromCore(ctx, dh.DeviceID) |
| if getErr != nil || onuVolthaDevice == nil { |
| logger.Errorw(ctx, "Failed to fetch Onu device for image activation", log.Fields{"device-id": dh.DeviceID, "err": getErr}) |
| return nil, fmt.Errorf("could not fetch device for device-id: %s", dh.DeviceID) |
| } |
| if dh.upgradeCanceled { //avoid starting some new action in case it is already doing the cancelation |
| logger.Errorw(ctx, "Some upgrade procedure still runs cancelation - abort", log.Fields{"device-id": dh.DeviceID}) |
| return nil, fmt.Errorf("request collides with some ongoing cancelation for device-id: %s", dh.DeviceID) |
| } |
| // use the OnuVendor identification from this device for the internal unique name |
| imageIdentifier := onuVolthaDevice.VendorId + aVersion //head on vendor ID of the ONU |
| // 1.) check a started upgrade process and relay the activation request to it |
| if err = dh.pOnuUpradeFsm.SetActivationParamsRunning(ctx, imageIdentifier, aCommitRequest); err != nil { |
| //if some ONU upgrade is ongoing we do not accept some explicit ONU image-version related activation |
| logger.Errorw(ctx, "onu upgrade fsm did not accept activation while running", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| return nil, fmt.Errorf("activation not accepted for this version for device-id: %s", dh.DeviceID) |
| } |
| logger.Debugw(ctx, "image activation acknowledged by onu upgrade processing", log.Fields{ |
| "device-id": dh.DeviceID, "image-id": imageIdentifier}) |
| pImageStates := dh.pOnuUpradeFsm.GetImageStates(ctx, "", aVersion) |
| return pImageStates, nil |
| } //else |
| dh.lockUpgradeFsm.RUnlock() |
| |
| // 2.) check if requested image-version equals the inactive one and start its activation |
| // (image version is not [yet] checked - would be possible, but with increased effort ...) |
| var inactiveImageID uint16 |
| if inactiveImageID, err = pDevEntry.GetInactiveImageMeID(ctx); err != nil || inactiveImageID > 1 { |
| logger.Errorw(ctx, "get inactive image failed", log.Fields{ |
| "device-id": dh.DeviceID, "err": err, "image-id": inactiveImageID}) |
| return nil, fmt.Errorf("no valid inactive image found for device-id: %s", dh.DeviceID) |
| } |
| dh.lockUpgradeFsm.Lock() //lock again for following creation |
| err = dh.createOnuUpgradeFsm(ctx, pDevEntry, cmn.OmciOnuSwUpgradeDone) |
| dh.lockUpgradeFsm.Unlock() |
| if err == nil { |
| if err = dh.pOnuUpradeFsm.SetActivationParamsStart(ctx, aVersion, |
| inactiveImageID, aCommitRequest); err != nil { |
| logger.Errorw(ctx, "onu upgrade fsm did not accept activation to start", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| return nil, fmt.Errorf("activation to start from scratch not accepted for device-id: %s", dh.DeviceID) |
| } |
| logger.Debugw(ctx, "inactive image activation acknowledged by onu upgrade", log.Fields{ |
| "device-id": dh.DeviceID, "image-version": aVersion}) |
| pImageStates := dh.pOnuUpradeFsm.GetImageStates(ctx, "", aVersion) |
| return pImageStates, nil |
| } //else |
| logger.Errorw(ctx, "onu upgrade fsm could not be created", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| return nil, fmt.Errorf("could not start upgradeFsm for device-id: %s", dh.DeviceID) |
| } |
| |
| // onuSwCommitRequest ensures commitment of the requested image |
| func (dh *deviceHandler) onuSwCommitRequest(ctx context.Context, |
| aVersion string) (*voltha.ImageState, error) { |
| var err error |
| //SW commitment for the ONU image may have two use cases, one of them is selected here according to following prioritization: |
| // 1.) commitment of the image for a started upgrade process (in case the running upgrade runs on the requested image) |
| // 2.) commitment of the active image |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "Onu image commitment rejected: no valid OnuDevice", log.Fields{"device-id": dh.DeviceID}) |
| return nil, fmt.Errorf("no valid OnuDevice for device-id: %s", dh.DeviceID) |
| } |
| dh.lockUpgradeFsm.RLock() |
| if dh.pOnuUpradeFsm != nil { |
| dh.lockUpgradeFsm.RUnlock() |
| onuVolthaDevice, getErr := dh.getDeviceFromCore(ctx, dh.DeviceID) |
| if getErr != nil || onuVolthaDevice == nil { |
| logger.Errorw(ctx, "Failed to fetch Onu device for image commitment", log.Fields{"device-id": dh.DeviceID, "err": getErr}) |
| return nil, fmt.Errorf("could not fetch device for device-id: %s", dh.DeviceID) |
| } |
| if dh.upgradeCanceled { //avoid starting some new action in case it is already doing the cancelation |
| logger.Errorw(ctx, "Some upgrade procedure still runs cancelation - abort", log.Fields{"device-id": dh.DeviceID}) |
| return nil, fmt.Errorf("request collides with some ongoing cancelation for device-id: %s", dh.DeviceID) |
| } |
| // use the OnuVendor identification from this device for the internal unique name |
| imageIdentifier := onuVolthaDevice.VendorId + aVersion //head on vendor ID of the ONU |
| // 1.) check a started upgrade process and relay the commitment request to it |
| // the running upgrade may be based either on the imageIdentifier (started from download) |
| // or on the imageVersion (started from pure activation) |
| if err = dh.pOnuUpradeFsm.SetCommitmentParamsRunning(ctx, imageIdentifier, aVersion); err != nil { |
| //if some ONU upgrade is ongoing we do not accept some explicit different ONU image-version related commitment |
| logger.Errorw(ctx, "onu upgrade fsm did not accept commitment while running", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| return nil, fmt.Errorf("commitment not accepted for this version for device-id: %s", dh.DeviceID) |
| } |
| logger.Debugw(ctx, "image commitment acknowledged by onu upgrade processing", log.Fields{ |
| "device-id": dh.DeviceID, "image-id": imageIdentifier}) |
| pImageStates := dh.pOnuUpradeFsm.GetImageStates(ctx, "", aVersion) |
| return pImageStates, nil |
| } //else |
| dh.lockUpgradeFsm.RUnlock() |
| |
| // 2.) use the active image to directly commit |
| var activeImageID uint16 |
| if activeImageID, err = pDevEntry.GetActiveImageMeID(ctx); err != nil || activeImageID > 1 { |
| logger.Errorw(ctx, "get active image failed", log.Fields{ |
| "device-id": dh.DeviceID, "err": err, "image-id": activeImageID}) |
| return nil, fmt.Errorf("no valid active image found for device-id: %s", dh.DeviceID) |
| } |
| dh.lockUpgradeFsm.Lock() //lock again for following creation |
| err = dh.createOnuUpgradeFsm(ctx, pDevEntry, cmn.OmciOnuSwUpgradeDone) |
| dh.lockUpgradeFsm.Unlock() |
| if err == nil { |
| if err = dh.pOnuUpradeFsm.SetCommitmentParamsStart(ctx, aVersion, activeImageID); err != nil { |
| logger.Errorw(ctx, "onu upgrade fsm did not accept commitment to start", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| return nil, fmt.Errorf("commitment to start from scratch not accepted for device-id: %s", dh.DeviceID) |
| } |
| logger.Debugw(ctx, "active image commitment acknowledged by onu upgrade", log.Fields{ |
| "device-id": dh.DeviceID, "image-version": aVersion}) |
| pImageStates := dh.pOnuUpradeFsm.GetImageStates(ctx, "", aVersion) |
| return pImageStates, nil |
| } //else |
| logger.Errorw(ctx, "onu upgrade fsm could not be created", log.Fields{ |
| "device-id": dh.DeviceID, "error": err}) |
| return nil, fmt.Errorf("could not start upgradeFsm for device-id: %s", dh.DeviceID) |
| } |
| |
| func (dh *deviceHandler) requestOnuSwUpgradeState(ctx context.Context, aImageIdentifier string, |
| aVersion string) *voltha.ImageState { |
| var pImageState *voltha.ImageState |
| dh.lockUpgradeFsm.RLock() |
| defer dh.lockUpgradeFsm.RUnlock() |
| if dh.pOnuUpradeFsm != nil { |
| pImageState = dh.pOnuUpradeFsm.GetImageStates(ctx, aImageIdentifier, aVersion) |
| } else { //use the last stored ImageState (if the requested Imageversion coincides) |
| if aVersion == dh.pLastUpgradeImageState.Version { |
| pImageState = dh.pLastUpgradeImageState |
| } else { //state request for an image version different from last processed image version |
| pImageState = &voltha.ImageState{ |
| Version: aVersion, |
| //we cannot state something concerning this version |
| DownloadState: voltha.ImageState_DOWNLOAD_UNKNOWN, |
| Reason: voltha.ImageState_NO_ERROR, |
| ImageState: voltha.ImageState_IMAGE_UNKNOWN, |
| } |
| } |
| } |
| return pImageState |
| } |
| |
| func (dh *deviceHandler) cancelOnuSwUpgrade(ctx context.Context, aImageIdentifier string, |
| aVersion string, pDeviceImageState *voltha.DeviceImageState) { |
| pDeviceImageState.DeviceId = dh.DeviceID |
| pDeviceImageState.ImageState.Version = aVersion |
| dh.lockUpgradeFsm.RLock() |
| if dh.pOnuUpradeFsm != nil { |
| dh.lockUpgradeFsm.RUnlock() |
| // so then we cancel the upgrade operation |
| // but before we still request the actual upgrade states for the direct response |
| pImageState := dh.pOnuUpradeFsm.GetImageStates(ctx, aImageIdentifier, aVersion) |
| pDeviceImageState.ImageState.DownloadState = pImageState.DownloadState |
| pDeviceImageState.ImageState.Reason = voltha.ImageState_CANCELLED_ON_REQUEST |
| pDeviceImageState.ImageState.ImageState = pImageState.ImageState |
| if pImageState.DownloadState != voltha.ImageState_DOWNLOAD_UNKNOWN { |
| //so here the imageIdentifier or version equals to what is used in the upgrade FSM |
| if !dh.upgradeCanceled { //avoid double cancelation in case it is already doing the cancelation |
| dh.upgradeCanceled = true |
| dh.pOnuUpradeFsm.CancelProcessing(ctx, true, voltha.ImageState_CANCELLED_ON_REQUEST) //complete abort |
| } |
| } //nothing to cancel (upgrade FSM for different image stays alive) |
| } else { |
| dh.lockUpgradeFsm.RUnlock() |
| // if no upgrade is ongoing, nothing is canceled and accordingly the states of the requested image are unknown |
| // reset also the dh handler LastUpgradeImageState (not relevant anymore/cleared) |
| (*dh.pLastUpgradeImageState).DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN |
| (*dh.pLastUpgradeImageState).Reason = voltha.ImageState_NO_ERROR |
| (*dh.pLastUpgradeImageState).ImageState = voltha.ImageState_IMAGE_UNKNOWN |
| (*dh.pLastUpgradeImageState).Version = "" //reset to 'no (relevant) upgrade done' (like initial state) |
| pDeviceImageState.ImageState.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN |
| pDeviceImageState.ImageState.Reason = voltha.ImageState_NO_ERROR |
| pDeviceImageState.ImageState.ImageState = voltha.ImageState_IMAGE_UNKNOWN |
| //an abort request to a not active upgrade processing can be used to reset the device upgrade states completely |
| } |
| } |
| |
| func (dh *deviceHandler) getOnuImages(ctx context.Context) (*voltha.OnuImages, error) { |
| |
| var onuImageStatus *swupg.OnuImageStatus |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry != nil { |
| onuImageStatus = swupg.NewOnuImageStatus(dh, pDevEntry) |
| pDevEntry.MutexOnuImageStatus.Lock() |
| pDevEntry.POnuImageStatus = onuImageStatus |
| pDevEntry.MutexOnuImageStatus.Unlock() |
| |
| } else { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return nil, fmt.Errorf("no-valid-OnuDevice-aborting") |
| } |
| images, err := onuImageStatus.GetOnuImageStatus(ctx) |
| pDevEntry.MutexOnuImageStatus.Lock() |
| pDevEntry.POnuImageStatus = nil |
| pDevEntry.MutexOnuImageStatus.Unlock() |
| return images, err |
| } |
| |
| // deviceHandler methods that implement the adapters interface requests## end ######### |
| // ##################################################################################### |
| |
| // ################ to be updated acc. needs of ONU Device ######################## |
| // deviceHandler StateMachine related state transition methods ##### begin ######### |
| |
| func (dh *deviceHandler) logStateChange(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "Device FSM: ", log.Fields{"event name": string(e.Event), |
| "src state": string(e.Src), "dst state": string(e.Dst), "device-id": dh.DeviceID}) |
| } |
| |
| // doStateInit provides the device update to the core |
| func (dh *deviceHandler) doStateInit(ctx context.Context, e *fsm.Event) { |
| |
| logger.Debugw(ctx, "doStateInit-started", log.Fields{"device-id": dh.DeviceID}) |
| var err error |
| |
| // populate what we know. rest comes later after mib sync |
| dh.device.Root = false |
| dh.device.Vendor = "OpenONU" |
| dh.device.Model = "go" |
| dh.device.Reason = cmn.DeviceReasonMap[cmn.DrActivatingOnu] |
| _ = dh.ReasonUpdate(ctx, cmn.DrActivatingOnu, false) |
| |
| dh.logicalDeviceID = dh.DeviceID // really needed - what for ??? //TODO!!! |
| |
| if !dh.IsReconciling() { |
| logger.Infow(ctx, "DeviceUpdate", log.Fields{"deviceReason": dh.device.Reason, "device-id": dh.DeviceID}) |
| if err := dh.updateDeviceInCore(ctx, dh.device); err != nil { |
| logger.Errorw(ctx, "device-update-failed", log.Fields{"device-id": dh.device.Id, "error": err}) |
| } |
| //TODO Need to Update Device Reason To CORE as part of device update userstory |
| } else { |
| logger.Infow(ctx, "reconciling - don't notify core about DeviceUpdate", |
| log.Fields{"device-id": dh.DeviceID}) |
| } |
| |
| dh.parentID = dh.device.ParentId |
| dh.ponPortNumber = dh.device.ParentPortNo |
| |
| // store proxy parameters for later communication - assumption: invariant, else they have to be requested dynamically!! |
| dh.ProxyAddressID = dh.device.ProxyAddress.GetDeviceId() |
| dh.ProxyAddressType = dh.device.ProxyAddress.GetDeviceType() |
| logger.Debugw(ctx, "device-updated", log.Fields{"device-id": dh.DeviceID, "proxyAddressID": dh.ProxyAddressID, |
| "proxyAddressType": dh.ProxyAddressType, "SNR": dh.device.SerialNumber, |
| "ParentId": dh.parentID, "ParentPortNo": dh.ponPortNumber}) |
| |
| /* |
| self._pon = PonPort.create(self, self._pon_port_number) |
| self._pon.add_peer(self.parent_id, self._pon_port_number) |
| self.logger.debug('adding-pon-port-to-agent', |
| type=self._pon.get_port().type, |
| admin_state=self._pon.get_port().admin_state, |
| oper_status=self._pon.get_port().oper_status, |
| ) |
| */ |
| if !dh.IsReconciling() { |
| logger.Infow(ctx, "adding-pon-port", log.Fields{"device-id": dh.DeviceID, "ponPortNo": dh.ponPortNumber}) |
| var ponPortNo uint32 = 1 |
| if dh.ponPortNumber != 0 { |
| ponPortNo = dh.ponPortNumber |
| } |
| |
| pPonPort := &voltha.Port{ |
| DeviceId: dh.DeviceID, |
| PortNo: ponPortNo, |
| Label: fmt.Sprintf("pon-%d", ponPortNo), |
| Type: voltha.Port_PON_ONU, |
| OperStatus: voltha.OperStatus_ACTIVE, |
| Peers: []*voltha.Port_PeerPort{{DeviceId: dh.parentID, // Peer device is OLT |
| PortNo: ponPortNo}}, // Peer port is parent's port number |
| } |
| if err = dh.CreatePortInCore(ctx, pPonPort); err != nil { |
| logger.Fatalf(ctx, "Device FSM: PortCreated-failed-%s:%s", err, dh.DeviceID) |
| e.Cancel(err) |
| return |
| } |
| } else { |
| logger.Infow(ctx, "reconciling - pon-port already added", log.Fields{"device-id": dh.DeviceID}) |
| } |
| logger.Debugw(ctx, "doStateInit-done", log.Fields{"device-id": dh.DeviceID}) |
| } |
| |
| // postInit setups the DeviceEntry for the conerned device |
| func (dh *deviceHandler) postInit(ctx context.Context, e *fsm.Event) { |
| |
| logger.Debugw(ctx, "postInit-started", log.Fields{"device-id": dh.DeviceID}) |
| var err error |
| /* |
| dh.Client = oop.NewOpenoltClient(dh.clientCon) |
| dh.pTransitionMap.Handle(ctx, GrpcConnected) |
| return nil |
| */ |
| if err = dh.addOnuDeviceEntry(log.WithSpanFromContext(context.TODO(), ctx)); err != nil { |
| logger.Fatalf(ctx, "Device FSM: addOnuDeviceEntry-failed-%s:%s", err, dh.DeviceID) |
| e.Cancel(err) |
| return |
| } |
| |
| if dh.IsReconciling() { |
| go dh.reconcileDeviceOnuInd(ctx) |
| // reconcilement will be continued after mib download is done |
| } |
| |
| /* |
| ############################################################################ |
| # Setup Alarm handler |
| self.events = AdapterEvents(self.core_proxy, device.id, self.logical_device_id, |
| device.serial_number) |
| ############################################################################ |
| # Setup PM configuration for this device |
| # Pass in ONU specific options |
| kwargs = { |
| OnuPmMetrics.DEFAULT_FREQUENCY_KEY: OnuPmMetrics.DEFAULT_ONU_COLLECTION_FREQUENCY, |
| 'heartbeat': self.heartbeat, |
| OnuOmciPmMetrics.OMCI_DEV_KEY: self._onu_omci_device |
| } |
| self.logger.debug('create-pm-metrics', device_id=device.id, serial_number=device.serial_number) |
| self._pm_metrics = OnuPmMetrics(self.events, self.core_proxy, self.device_id, |
| self.logical_device_id, device.serial_number, |
| grouped=True, freq_override=False, **kwargs) |
| pm_config = self._pm_metrics.make_proto() |
| self._onu_omci_device.set_pm_config(self._pm_metrics.omci_pm.openomci_interval_pm) |
| self.logger.info("initial-pm-config", device_id=device.id, serial_number=device.serial_number) |
| yield self.core_proxy.device_pm_config_update(pm_config, init=True) |
| |
| # Note, ONU ID and UNI intf set in add_uni_port method |
| self._onu_omci_device.alarm_synchronizer.set_alarm_params(mgr=self.events, |
| ani_ports=[self._pon]) |
| |
| # Code to Run OMCI Test Action |
| kwargs_omci_test_action = { |
| OmciTestRequest.DEFAULT_FREQUENCY_KEY: |
| OmciTestRequest.DEFAULT_COLLECTION_FREQUENCY |
| } |
| serial_number = device.serial_number |
| self._test_request = OmciTestRequest(self.core_proxy, |
| self.omci_agent, self.device_id, |
| AniG, serial_number, |
| self.logical_device_id, |
| exclusive=False, |
| **kwargs_omci_test_action) |
| |
| self.Enabled = True |
| else: |
| self.logger.info('onu-already-activated') |
| */ |
| |
| logger.Debugw(ctx, "postInit-done", log.Fields{"device-id": dh.DeviceID}) |
| } |
| |
| // doStateConnected get the device info and update to voltha core |
| // for comparison of the original method (not that easy to uncomment): compare here: |
| // |
| // voltha-openolt-adapter/adaptercore/device_handler.go |
| // -> this one obviously initiates all communication interfaces of the device ...? |
| func (dh *deviceHandler) doStateConnected(ctx context.Context, e *fsm.Event) { |
| |
| logger.Debugw(ctx, "doStateConnected-started", log.Fields{"device-id": dh.DeviceID}) |
| err := errors.New("device FSM: function not implemented yet") |
| e.Cancel(err) |
| logger.Debugw(ctx, "doStateConnected-done", log.Fields{"device-id": dh.DeviceID}) |
| } |
| |
| // doStateUp handle the onu up indication and update to voltha core |
| func (dh *deviceHandler) doStateUp(ctx context.Context, e *fsm.Event) { |
| |
| logger.Debugw(ctx, "doStateUp-started", log.Fields{"device-id": dh.DeviceID}) |
| err := errors.New("device FSM: function not implemented yet") |
| e.Cancel(err) |
| logger.Debugw(ctx, "doStateUp-done", log.Fields{"device-id": dh.DeviceID}) |
| |
| /* |
| // Synchronous call to update device state - this method is run in its own go routine |
| if err := dh.coreProxy.DeviceStateUpdate(ctx, dh.device.Id, voltha.ConnectStatus_REACHABLE, |
| voltha.OperStatus_ACTIVE); err != nil { |
| logger.Errorw("Failed to update device with OLT UP indication", log.Fields{"device-id": dh.device.Id, "error": err}) |
| return err |
| } |
| return nil |
| */ |
| } |
| |
| // doStateDown handle the onu down indication |
| func (dh *deviceHandler) doStateDown(ctx context.Context, e *fsm.Event) { |
| |
| logger.Debugw(ctx, "doStateDown-started", log.Fields{"device-id": dh.DeviceID}) |
| var err error |
| |
| device := dh.device |
| if device == nil { |
| /*TODO: needs to handle error scenarios */ |
| logger.Errorw(ctx, "Failed to fetch handler device", log.Fields{"device-id": dh.DeviceID}) |
| e.Cancel(err) |
| return |
| } |
| |
| cloned := proto.Clone(device).(*voltha.Device) |
| logger.Debugw(ctx, "do-state-down", log.Fields{"ClonedDeviceID": cloned.Id}) |
| /* |
| // Update the all ports state on that device to disable |
| if er := dh.coreProxy.PortsStateUpdate(ctx, cloned.Id, voltha.OperStatus_UNKNOWN); er != nil { |
| logger.Errorw("updating-ports-failed", log.Fields{"device-id": device.Id, "error": er}) |
| return er |
| } |
| |
| //Update the device oper state and connection status |
| cloned.OperStatus = voltha.OperStatus_UNKNOWN |
| cloned.ConnectStatus = common.ConnectStatus_UNREACHABLE |
| dh.device = cloned |
| |
| if er := dh.coreProxy.DeviceStateUpdate(ctx, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); er != nil { |
| logger.Errorw("error-updating-device-state", log.Fields{"device-id": device.Id, "error": er}) |
| return er |
| } |
| |
| //get the child device for the parent device |
| onuDevices, err := dh.coreProxy.GetChildDevices(ctx, dh.device.Id) |
| if err != nil { |
| logger.Errorw("failed to get child devices information", log.Fields{"device-id": dh.device.Id, "error": err}) |
| return err |
| } |
| for _, onuDevice := range onuDevices.Items { |
| |
| // Update onu state as down in onu adapter |
| onuInd := oop.OnuIndication{} |
| onuInd.OperState = "down" |
| er := dh.adapterProxy.SendInterAdapterMessage(ctx, &onuInd, ca.InterAdapterMessageType_ONU_IND_REQUEST, |
| "openolt", onuDevice.Type, onuDevice.Id, onuDevice.ProxyAddress.DeviceId, "") |
| if er != nil { |
| logger.Errorw("Failed to send inter-adapter-message", log.Fields{"OnuInd": onuInd, |
| "From Adapter": "openolt", "DevieType": onuDevice.Type, "device-id": onuDevice.Id}) |
| //Do not return here and continue to process other ONUs |
| } |
| } |
| // * Discovered ONUs entries need to be cleared , since after OLT |
| // is up, it starts sending discovery indications again* / |
| dh.discOnus = sync.Map{} |
| logger.Debugw("do-state-down-end", log.Fields{"device-id": device.Id}) |
| return nil |
| */ |
| err = errors.New("device FSM: function not implemented yet") |
| e.Cancel(err) |
| logger.Debugw(ctx, "doStateDown-done", log.Fields{"device-id": dh.DeviceID}) |
| } |
| |
| // deviceHandler StateMachine related state transition methods ##### end ######### |
| // ################################################################################# |
| |
| // ################################################### |
| // deviceHandler utility methods ##### begin ######### |
| |
| // GetOnuDeviceEntry gets the ONU device entry and may wait until its value is defined |
| func (dh *deviceHandler) GetOnuDeviceEntry(ctx context.Context, aWait bool) *mib.OnuDeviceEntry { |
| dh.lockDevice.RLock() |
| pOnuDeviceEntry := dh.pOnuOmciDevice |
| if aWait && pOnuDeviceEntry == nil { |
| //keep the read sema short to allow for subsequent write |
| dh.lockDevice.RUnlock() |
| logger.Debugw(ctx, "Waiting for DeviceEntry to be set ...", log.Fields{"device-id": dh.DeviceID}) |
| // based on concurrent processing the deviceEntry setup may not yet be finished at his point |
| // so it might be needed to wait here for that event with some timeout |
| select { |
| case <-time.After(60 * time.Second): //timer may be discussed ... |
| logger.Errorw(ctx, "No valid DeviceEntry set after maxTime", log.Fields{"device-id": dh.DeviceID}) |
| return nil |
| case <-dh.deviceEntrySet: |
| logger.Debugw(ctx, "devicEntry ready now - continue", log.Fields{"device-id": dh.DeviceID}) |
| // if written now, we can return the written value without sema |
| return dh.pOnuOmciDevice |
| } |
| } |
| dh.lockDevice.RUnlock() |
| return pOnuDeviceEntry |
| } |
| |
| // setDeviceHandlerEntries sets the ONU device entry within the handler |
| func (dh *deviceHandler) setDeviceHandlerEntries(apDeviceEntry *mib.OnuDeviceEntry, apOnuTp *avcfg.OnuUniTechProf, |
| apOnuMetricsMgr *pmmgr.OnuMetricsManager, apOnuAlarmMgr *almgr.OnuAlarmManager, apSelfTestHdlr *otst.SelfTestControlBlock) { |
| dh.lockDevice.Lock() |
| defer dh.lockDevice.Unlock() |
| dh.pOnuOmciDevice = apDeviceEntry |
| dh.pOnuTP = apOnuTp |
| dh.pOnuMetricsMgr = apOnuMetricsMgr |
| dh.pAlarmMgr = apOnuAlarmMgr |
| dh.pSelfTestHdlr = apSelfTestHdlr |
| } |
| |
| // addOnuDeviceEntry creates a new ONU device or returns the existing |
| func (dh *deviceHandler) addOnuDeviceEntry(ctx context.Context) error { |
| logger.Debugw(ctx, "adding-deviceEntry", log.Fields{"device-id": dh.DeviceID}) |
| |
| deviceEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if deviceEntry == nil { |
| /* costum_me_map in python code seems always to be None, |
| we omit that here first (declaration unclear) -> todo at Adapter specialization ...*/ |
| /* also no 'clock' argument - usage open ...*/ |
| /* and no alarm_db yet (oo.alarm_db) */ |
| deviceEntry = mib.NewOnuDeviceEntry(ctx, dh.coreClient, dh, dh.pOpenOnuAc) |
| onuTechProfProc := avcfg.NewOnuUniTechProf(ctx, dh, deviceEntry) |
| onuMetricsMgr := pmmgr.NewOnuMetricsManager(ctx, dh, deviceEntry) |
| onuAlarmManager := almgr.NewAlarmManager(ctx, dh, deviceEntry) |
| selfTestHdlr := otst.NewSelfTestMsgHandlerCb(ctx, dh, deviceEntry) |
| //error treatment possible //TODO!!! |
| dh.setDeviceHandlerEntries(deviceEntry, onuTechProfProc, onuMetricsMgr, onuAlarmManager, selfTestHdlr) |
| // fire deviceEntry ready event to spread to possibly waiting processing |
| dh.deviceEntrySet <- true |
| logger.Debugw(ctx, "onuDeviceEntry-added", log.Fields{"device-id": dh.DeviceID}) |
| } else { |
| logger.Debugw(ctx, "onuDeviceEntry-add: Device already exists", log.Fields{"device-id": dh.DeviceID}) |
| } |
| // might be updated with some error handling !!! |
| return nil |
| } |
| |
| func (dh *deviceHandler) createInterface(ctx context.Context, onuind *oop.OnuIndication) error { |
| logger.Debugw(ctx, "create_interface-started", log.Fields{"device-id": dh.DeviceID, "OnuId": onuind.GetOnuId(), |
| "OnuIntfId": onuind.GetIntfId(), "OnuSerialNumber": onuind.GetSerialNumber()}) |
| |
| dh.pOnuIndication = onuind // let's revise if storing the pointer is sufficient... |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice: %s", dh.DeviceID) |
| } |
| |
| if !dh.IsReconciling() { |
| if err := dh.StorePersistentData(ctx); err != nil { |
| logger.Warnw(ctx, "store persistent data error - continue as there will be additional write attempts", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } |
| logger.Debugw(ctx, "call DeviceStateUpdate upon create interface", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE, |
| "OperStatus": voltha.OperStatus_ACTIVATING, "device-id": dh.DeviceID}) |
| |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| OperStatus: voltha.OperStatus_ACTIVATING, |
| ConnStatus: voltha.ConnectStatus_REACHABLE, |
| }); err != nil { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing |
| logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| } |
| } else { |
| logger.Info(ctx, "reconciling - don't notify core about DeviceStateUpdate to ACTIVATING", |
| log.Fields{"device-id": dh.DeviceID}) |
| |
| pDevEntry.MutexPersOnuConfig.RLock() |
| if !pDevEntry.SOnuPersistentData.PersUniUnlockDone { |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| logger.Debugw(ctx, "reconciling - uni-ports were not unlocked before adapter restart - resume with a normal start-up", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.stopReconciling(ctx, true, cWaitReconcileFlowNoActivity) |
| |
| //VOL-4965: Recover previously Activating ONU during reconciliation. |
| if dh.device.OperStatus == common.OperStatus_ACTIVATING { |
| logger.Debugw(ctx, "Reconciling an ONU in previously activating state, perform MIB reset and resume normal start up", |
| log.Fields{"device-id": dh.DeviceID}) |
| pDevEntry.MutexPersOnuConfig.Lock() |
| pDevEntry.SOnuPersistentData.PersMibLastDbSync = 0 |
| pDevEntry.MutexPersOnuConfig.Unlock() |
| } |
| } else { |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| } |
| } |
| // It does not look to me as if makes sense to work with the real core device here, (not the stored clone)? |
| // in this code the GetDevice would just make a check if the DeviceID's Device still exists in core |
| // in python code it looks as the started onu_omci_device might have been updated with some new instance state of the core device |
| // but I would not know why, and the go code anyway does not work with the device directly anymore in the mib.OnuDeviceEntry |
| // so let's just try to keep it simple ... |
| /* |
| device, err := dh.coreProxy.GetDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, dh.device.Id) |
| if err != nil || device == nil { |
| //TODO: needs to handle error scenarios |
| logger.Errorw("Failed to fetch device device at creating If", log.Fields{"err": err}) |
| return errors.New("Voltha Device not found") |
| } |
| */ |
| |
| if err := pDevEntry.Start(log.WithSpanFromContext(context.TODO(), ctx)); err != nil { |
| return err |
| } |
| _ = dh.ReasonUpdate(ctx, cmn.DrStartingOpenomci, !dh.IsReconciling() || dh.IsReconcilingReasonUpdate()) |
| if !dh.IsReconciling() && !dh.GetSkipOnuConfigEnabled() { |
| /* this might be a good time for Omci Verify message? */ |
| verifyExec := make(chan bool) |
| omciVerify := otst.NewOmciTestRequest(log.WithSpanFromContext(context.TODO(), ctx), |
| dh.device.Id, pDevEntry.PDevOmciCC, false, |
| true, true) //exclusive and allowFailure (anyway not yet checked) |
| omciVerify.PerformOmciTest(log.WithSpanFromContext(context.TODO(), ctx), verifyExec) |
| |
| /* give the handler some time here to wait for the OMCi verification result |
| after Timeout start and try MibUpload FSM anyway |
| (to prevent stopping on just not supported OMCI verification from ONU) */ |
| select { |
| case <-time.After(((cmn.CDefaultRetries+1)*otst.CTestRequestOmciTimeout + 1) * time.Second): |
| logger.Warnw(ctx, "omci start-verification timed out (continue normal)", log.Fields{"device-id": dh.DeviceID}) |
| case testresult := <-verifyExec: |
| logger.Infow(ctx, "Omci start verification done", log.Fields{"device-id": dh.DeviceID, "result": testresult}) |
| case <-dh.deviceDeleteCommChan: |
| logger.Warnw(ctx, "Deleting device, stopping the omci test activity", log.Fields{"device-id": dh.DeviceID}) |
| return nil |
| } |
| } |
| |
| /* In py code it looks earlier (on activate ..) |
| # Code to Run OMCI Test Action |
| kwargs_omci_test_action = { |
| OmciTestRequest.DEFAULT_FREQUENCY_KEY: |
| OmciTestRequest.DEFAULT_COLLECTION_FREQUENCY |
| } |
| serial_number = device.serial_number |
| self._test_request = OmciTestRequest(self.core_proxy, |
| self.omci_agent, self.device_id, |
| AniG, serial_number, |
| self.logical_device_id, |
| exclusive=False, |
| **kwargs_omci_test_action) |
| ... |
| # Start test requests after a brief pause |
| if not self._test_request_started: |
| self._test_request_started = True |
| tststart = _STARTUP_RETRY_WAIT * (random.randint(1, 5)) |
| reactor.callLater(tststart, self._test_request.start_collector) |
| |
| */ |
| /* which is then: in omci_test_request.py : */ |
| /* |
| def start_collector(self, callback=None): |
| """ |
| Start the collection loop for an adapter if the frequency > 0 |
| |
| :param callback: (callable) Function to call to collect PM data |
| """ |
| self.logger.info("starting-pm-collection", device_name=self.name, default_freq=self.default_freq) |
| if callback is None: |
| callback = self.perform_test_omci |
| |
| if self.lc is None: |
| self.lc = LoopingCall(callback) |
| |
| if self.default_freq > 0: |
| self.lc.start(interval=self.default_freq / 10) |
| |
| def perform_test_omci(self): |
| """ |
| Perform the initial test request |
| """ |
| ani_g_entities = self._device.configuration.ani_g_entities |
| ani_g_entities_ids = list(ani_g_entities.keys()) if ani_g_entities \ |
| is not None else None |
| self._entity_id = ani_g_entities_ids[0] |
| self.logger.info('perform-test', entity_class=self._entity_class, |
| entity_id=self._entity_id) |
| try: |
| frame = MEFrame(self._entity_class, self._entity_id, []).test() |
| result = yield self._device.omci_cc.send(frame) |
| if not result.fields['omci_message'].fields['success_code']: |
| self.logger.info('Self-Test Submitted Successfully', |
| code=result.fields[ |
| 'omci_message'].fields['success_code']) |
| else: |
| raise TestFailure('Test Failure: {}'.format( |
| result.fields['omci_message'].fields['success_code'])) |
| except TimeoutError as e: |
| self.deferred.errback(failure.Failure(e)) |
| |
| except Exception as e: |
| self.logger.exception('perform-test-Error', e=e, |
| class_id=self._entity_class, |
| entity_id=self._entity_id) |
| self.deferred.errback(failure.Failure(e)) |
| |
| */ |
| |
| // PM related heartbeat??? !!!TODO.... |
| //self._heartbeat.Enabled = True |
| |
| /* Note: Even though FSM calls look 'synchronous' here, FSM is running in background with the effect that possible errors |
| * within the MibUpload are not notified in the OnuIndication response, this might be acceptable here, |
| * as further OltAdapter processing may rely on the deviceReason event 'MibUploadDone' as a result of the FSM processing |
| * otherwise some processing synchronization would be required - cmp. e.g TechProfile processing |
| */ |
| //call MibUploadFSM - transition up to state UlStInSync |
| pMibUlFsm := pDevEntry.PMibUploadFsm.PFsm |
| if pMibUlFsm != nil { |
| if pMibUlFsm.Is(mib.UlStDisabled) { |
| if err := pMibUlFsm.Event(mib.UlEvStart); err != nil { |
| logger.Errorw(ctx, "MibSyncFsm: Can't go to state starting", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| return fmt.Errorf("can't go to state starting: %s", dh.DeviceID) |
| } |
| logger.Debugw(ctx, "MibSyncFsm", log.Fields{"device-id": dh.DeviceID, "state": string(pMibUlFsm.Current())}) |
| //Determine ONU status and start/re-start MIB Synchronization tasks |
| //Determine if this ONU has ever synchronized |
| if pDevEntry.IsNewOnu() { |
| if err := pMibUlFsm.Event(mib.UlEvResetMib); err != nil { |
| logger.Errorw(ctx, "MibSyncFsm: Can't go to state resetting_mib", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| return fmt.Errorf("can't go to state resetting_mib: %s", dh.DeviceID) |
| } |
| } else { |
| if err := pMibUlFsm.Event(mib.UlEvVerifyAndStoreTPs); err != nil { |
| logger.Errorw(ctx, "MibSyncFsm: Can't go to state verify and store TPs", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| return fmt.Errorf("can't go to state verify and store TPs: %s", dh.DeviceID) |
| } |
| logger.Debugw(ctx, "state of MibSyncFsm", log.Fields{"device-id": dh.DeviceID, "state": string(pMibUlFsm.Current())}) |
| } |
| } else { |
| logger.Errorw(ctx, "wrong state of MibSyncFsm - want: disabled", log.Fields{"have": string(pMibUlFsm.Current()), |
| "device-id": dh.DeviceID}) |
| return fmt.Errorf("wrong state of MibSyncFsm: %s", dh.DeviceID) |
| } |
| } else { |
| logger.Errorw(ctx, "MibSyncFsm invalid - cannot be executed!!", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("can't execute MibSync: %s", dh.DeviceID) |
| } |
| return nil |
| } |
| |
| func (dh *deviceHandler) UpdateInterface(ctx context.Context) error { |
| //state checking to prevent unneeded processing (eg. on ONU 'unreachable' and 'down') |
| // (but note that the deviceReason may also have changed to e.g. TechProf*Delete_Success in between) |
| if dh.getDeviceReason() != cmn.DrStoppingOpenomci { |
| logger.Info(ctx, "updateInterface-started - stopping-device", log.Fields{"device-id": dh.DeviceID}) |
| |
| //stop all running FSM processing - make use of the DH-state as mirrored in the deviceReason |
| //here no conflict with aborted FSM's should arise as a complete OMCI initialization is assumed on ONU-Up |
| //but that might change with some simple MDS check on ONU-Up treatment -> attention!!! |
| if err := dh.resetFsms(ctx, true); err != nil { |
| logger.Errorw(ctx, "error-updateInterface at FSM stop", |
| log.Fields{"device-id": dh.DeviceID, "error": err}) |
| // abort: system behavior is just unstable ... |
| return err |
| } |
| //all stored persistent data are not valid anymore (loosing knowledge about the connected ONU) |
| _ = dh.deleteDevicePersistencyData(ctx) //ignore possible errors here and continue, hope is that data is synchronized with new ONU-Up |
| |
| //deviceEntry stop without omciCC reset here, regarding the OMCI_CC still valid for this ONU |
| //stop the device entry to allow for all system event transfers again |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice: %s", dh.DeviceID) |
| } |
| _ = pDevEntry.Stop(log.WithSpanFromContext(context.TODO(), ctx), false) |
| |
| //TODO!!! remove existing traffic profiles |
| /* from py code, if TP's exist, remove them - not yet implemented |
| self._tp = dict() |
| # Let TP download happen again |
| for uni_id in self._tp_service_specific_task: |
| self._tp_service_specific_task[uni_id].clear() |
| for uni_id in self._tech_profile_download_done: |
| self._tech_profile_download_done[uni_id].clear() |
| */ |
| |
| dh.DisableUniPortStateUpdate(ctx) |
| |
| dh.SetReadyForOmciConfig(false) |
| |
| if err := dh.ReasonUpdate(ctx, cmn.DrStoppingOpenomci, true); err != nil { |
| // abort: system behavior is just unstable ... |
| return err |
| } |
| logger.Debugw(ctx, "call DeviceStateUpdate upon update interface", log.Fields{"ConnectStatus": voltha.ConnectStatus_UNREACHABLE, |
| "OperStatus": voltha.OperStatus_DISCOVERED, "device-id": dh.DeviceID}) |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: voltha.ConnectStatus_UNREACHABLE, |
| OperStatus: voltha.OperStatus_DISCOVERED, |
| }); err != nil { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing |
| logger.Errorw(ctx, "error-updating-device-state unreachable-discovered", |
| log.Fields{"device-id": dh.DeviceID, "error": err}) |
| // abort: system behavior is just unstable ... |
| return err |
| } |
| } else { |
| logger.Debugw(ctx, "updateInterface - device already stopped", log.Fields{"device-id": dh.DeviceID}) |
| } |
| return nil |
| } |
| |
| func (dh *deviceHandler) resetFsms(ctx context.Context, includingMibSyncFsm bool) error { |
| //all possible FSM's are stopped or reset here to ensure their transition to 'disabled' |
| //it is not sufficient to stop/reset the latest running FSM as done in previous versions |
| // as after down/up procedures all FSM's might be active/ongoing (in theory) |
| // and using the stop/reset event should never harm |
| logger.Debugw(ctx, "resetFsms entered", log.Fields{"device-id": dh.DeviceID}) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| //VOL-5260: During race conditions when adoptDevice has not yet completed |
| // and deleteDevice is issued , returning error will further prevent clean up |
| // at rwcore . Returning success for clean up to happen and discovery to happen again. |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.DeviceID}) |
| return nil |
| } |
| if pDevEntry.PDevOmciCC != nil { |
| pDevEntry.PDevOmciCC.CancelRequestMonitoring(ctx) |
| } |
| pDevEntry.MutexOnuImageStatus.RLock() |
| if pDevEntry.POnuImageStatus != nil { |
| pDevEntry.POnuImageStatus.CancelProcessing(ctx) |
| } |
| pDevEntry.MutexOnuImageStatus.RUnlock() |
| |
| if includingMibSyncFsm { |
| pDevEntry.CancelProcessing(ctx) |
| } |
| //MibDownload may run |
| pMibDlFsm := pDevEntry.PMibDownloadFsm.PFsm |
| if pMibDlFsm != nil { |
| _ = pMibDlFsm.Event(mib.DlEvReset) |
| } |
| //stop any deviceHandler reconcile processing (if running) |
| dh.stopReconciling(ctx, false, cWaitReconcileFlowAbortOnError) |
| //port lock/unlock FSM's may be active |
| if dh.pUnlockStateFsm != nil { |
| _ = dh.pUnlockStateFsm.PAdaptFsm.PFsm.Event(uniprt.UniEvReset) |
| } |
| if dh.pLockStateFsm != nil { |
| _ = dh.pLockStateFsm.PAdaptFsm.PFsm.Event(uniprt.UniEvReset) |
| } |
| //techProfile related PonAniConfigFsm FSM may be active |
| if dh.pOnuTP != nil { |
| // should always be the case here |
| // FSM stop maybe encapsulated as OnuTP method - perhaps later in context of module splitting |
| if dh.pOnuTP.PAniConfigFsm != nil { |
| for uniTP := range dh.pOnuTP.PAniConfigFsm { |
| dh.pOnuTP.PAniConfigFsm[uniTP].CancelProcessing(ctx) |
| } |
| } |
| for _, uniPort := range dh.uniEntityMap { |
| // reset the possibly existing VlanConfigFsm |
| dh.lockVlanConfig.RLock() |
| if pVlanFilterFsm, exist := dh.UniVlanConfigFsmMap[uniPort.UniID]; exist { |
| //VlanFilterFsm exists and was already started |
| dh.lockVlanConfig.RUnlock() |
| //ensure the FSM processing is stopped in case waiting for some response |
| pVlanFilterFsm.CancelProcessing(ctx) |
| } else { |
| dh.lockVlanConfig.RUnlock() |
| } |
| } |
| } |
| |
| dh.mutexCollectorFlag.Lock() |
| logger.Debugw(ctx, "check-collector-is-running", log.Fields{"device-id": dh.device.Id, "flag": dh.collectorIsRunning}) |
| if dh.collectorIsRunning { |
| // Stop collector routine |
| dh.stopCollector <- true |
| dh.collectorIsRunning = false |
| } |
| dh.mutexCollectorFlag.Unlock() |
| |
| dh.mutextAlarmManagerFlag.Lock() |
| logger.Debugw(ctx, "check-alarm-manager-is-running", log.Fields{"device-id": dh.device.Id, "flag": dh.alarmManagerIsRunning}) |
| if dh.alarmManagerIsRunning { |
| dh.stopAlarmManager <- true |
| dh.alarmManagerIsRunning = false |
| } |
| dh.mutextAlarmManagerFlag.Unlock() |
| |
| dh.pSelfTestHdlr.SelfTestHandlerLock.Lock() |
| logger.Debugw(ctx, "check-self-test-control-block-is-running", log.Fields{"device-id": dh.device.Id, "flag": dh.pSelfTestHdlr.SelfTestHandlerActive}) |
| if dh.pSelfTestHdlr.SelfTestHandlerActive { |
| dh.pSelfTestHdlr.StopSelfTestModule <- true |
| dh.pSelfTestHdlr.SelfTestHandlerActive = false |
| } |
| dh.pSelfTestHdlr.SelfTestHandlerLock.Unlock() |
| |
| // Note: We want flow deletes to be processed on onu down, so do not stop flow monitoring routines |
| |
| //reset a possibly running upgrade FSM |
| // (note the Upgrade FSM may stay alive e.g. in state UpgradeStWaitForCommit to endure the ONU reboot) |
| dh.lockUpgradeFsm.RLock() |
| lopOnuUpradeFsm := dh.pOnuUpradeFsm |
| //lockUpgradeFsm must be release before cancellation as this may implicitly request RemoveOnuUpgradeFsm() |
| dh.lockUpgradeFsm.RUnlock() |
| if lopOnuUpradeFsm != nil { |
| if !dh.upgradeCanceled { //avoid double cancelation in case it is already doing the cancelation |
| //here we do not expect intermediate cancelation, we still allow for other commands on this FSM |
| // (even though it may also run into direct cancellation, a bit hard to verify here) |
| // so don't set 'dh.upgradeCanceled = true' here! |
| lopOnuUpradeFsm.CancelProcessing(ctx, false, voltha.ImageState_CANCELLED_ON_ONU_STATE) //conditional cancel |
| } |
| } |
| |
| logger.Infow(ctx, "resetFsms done", log.Fields{"device-id": dh.DeviceID}) |
| return nil |
| } |
| |
| func (dh *deviceHandler) processMibDatabaseSyncEvent(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| logger.Debugw(ctx, "MibInSync event received, adding uni ports and locking the ONU interfaces", log.Fields{"device-id": dh.DeviceID}) |
| |
| // store persistent data collected during MIB upload processing |
| if err := dh.StorePersistentData(ctx); err != nil { |
| logger.Warnw(ctx, "store persistent data error - continue as there will be additional write attempts", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } |
| _ = dh.ReasonUpdate(ctx, cmn.DrDiscoveryMibsyncComplete, !dh.IsReconciling() || dh.IsReconcilingReasonUpdate()) |
| dh.AddAllUniPorts(ctx) |
| |
| /* 200605: lock processing after initial MIBUpload removed now as the ONU should be in the lock state per default here */ |
| /* 201117: build_dt-berlin-pod-openonugo_1T8GEM_voltha_DT_openonugo_master_test runs into error TC |
| * 'Test Disable ONUs and OLT Then Delete ONUs and OLT for DT' with Sercom ONU, which obviously needs |
| * disable/enable toggling here to allow traffic |
| * but moreover it might be useful for tracking the interface operState changes if this will be implemented, |
| * like the py comment says: |
| * # start by locking all the unis till mib sync and initial mib is downloaded |
| * # this way we can capture the port down/up events when we are ready |
| */ |
| |
| // Init Uni Ports to Admin locked state |
| // *** should generate UniLockStateDone event ***** |
| if dh.pLockStateFsm == nil { |
| dh.createUniLockFsm(ctx, true, cmn.UniLockStateDone) |
| } else { //LockStateFSM already init |
| dh.pLockStateFsm.SetSuccessEvent(cmn.UniLockStateDone) |
| dh.runUniLockFsm(ctx, true) |
| } |
| } |
| |
| func (dh *deviceHandler) processUniLockStateDoneEvent(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| logger.Infow(ctx, "UniLockStateDone event: Starting MIB download", log.Fields{"device-id": dh.DeviceID}) |
| /* Mib download procedure - |
| ***** should run over 'downloaded' state and generate MibDownloadDone event ***** |
| */ |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| pMibDlFsm := pDevEntry.PMibDownloadFsm.PFsm |
| if pMibDlFsm != nil { |
| if pMibDlFsm.Is(mib.DlStDisabled) { |
| if err := pMibDlFsm.Event(mib.DlEvStart); err != nil { |
| logger.Errorw(ctx, "MibDownloadFsm: Can't go to state starting", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } else { |
| logger.Debugw(ctx, "MibDownloadFsm", log.Fields{"device-id": dh.DeviceID, "state": string(pMibDlFsm.Current())}) |
| // maybe use more specific states here for the specific download steps ... |
| if err := pMibDlFsm.Event(mib.DlEvCreateGal); err != nil { |
| logger.Errorw(ctx, "MibDownloadFsm: Can't start CreateGal", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } else { |
| logger.Debugw(ctx, "state of MibDownloadFsm", log.Fields{"device-id": dh.DeviceID, "state": string(pMibDlFsm.Current())}) |
| //Begin MIB data download (running autonomously) |
| } |
| } |
| } else { |
| logger.Errorw(ctx, "wrong state of MibDownloadFsm - want: disabled", log.Fields{"have": string(pMibDlFsm.Current()), |
| "device-id": dh.DeviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } |
| /***** Mib download started */ |
| } else { |
| logger.Errorw(ctx, "MibDownloadFsm invalid - cannot be executed!!", log.Fields{"device-id": dh.DeviceID}) |
| } |
| } |
| |
| func (dh *deviceHandler) processMibDownloadDoneEvent(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| logger.Info(ctx, "MibDownloadDone event received, unlocking the ONU interfaces", log.Fields{"device-id": dh.DeviceID}) |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| if !dh.IsReconciling() { |
| logger.Debugw(ctx, "call DeviceUpdate and DeviceStateUpdate upon mib-download done", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE, |
| "OperStatus": voltha.OperStatus_ACTIVE, "device-id": dh.DeviceID}) |
| // update device info in core |
| pDevEntry.MutexPersOnuConfig.RLock() |
| dh.device.Vendor = pDevEntry.SOnuPersistentData.PersVendorID |
| dh.device.VendorId = pDevEntry.SOnuPersistentData.PersVendorID |
| dh.device.Model = pDevEntry.SOnuPersistentData.PersVersion |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| dh.logicalDeviceID = dh.DeviceID |
| if err := dh.updateDeviceInCore(ctx, dh.device); err != nil { |
| logger.Errorw(ctx, "device-update-failed", log.Fields{"device-id": dh.device.Id, "error": err}) |
| } |
| // update device state in core |
| //we allow a possible OnuSw image commit only in the normal startup, not at reconciling |
| // in case of adapter restart connected to an ONU upgrade I would not rely on the image quality |
| // maybe some 'forced' commitment can be done in this situation from system management (or upgrade restarted) |
| dh.checkOnOnuImageCommit(ctx) |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: voltha.ConnectStatus_REACHABLE, |
| OperStatus: voltha.OperStatus_ACTIVE, |
| }); err != nil { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing |
| logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| } else { |
| logger.Debugw(ctx, "dev state updated to 'Oper.Active'", log.Fields{"device-id": dh.DeviceID}) |
| } |
| } else { |
| logger.Info(ctx, "reconciling - don't notify core about updated device info and DeviceStateUpdate to ACTIVE", |
| log.Fields{"device-id": dh.DeviceID}) |
| } |
| _ = dh.ReasonUpdate(ctx, cmn.DrInitialMibDownloaded, !dh.IsReconciling() || dh.IsReconcilingReasonUpdate()) |
| |
| if !dh.GetCollectorIsRunning() { |
| var waitForOmciProcessor sync.WaitGroup |
| waitForOmciProcessor.Add(1) |
| // Start PM collector routine |
| go dh.StartCollector(ctx, &waitForOmciProcessor) |
| waitForOmciProcessor.Wait() |
| } |
| if !dh.GetAlarmManagerIsRunning(ctx) { |
| go dh.StartAlarmManager(ctx) |
| } |
| |
| // Start flow handler routines per UNI |
| for _, uniPort := range dh.uniEntityMap { |
| // only if this port was enabled for use by the operator at startup |
| if (1<<uniPort.UniID)&dh.pOpenOnuAc.config.UniPortMask == (1 << uniPort.UniID) { |
| if !dh.GetFlowMonitoringIsRunning(uniPort.UniID) { |
| go dh.PerOnuFlowHandlerRoutine(uniPort.UniID) |
| } |
| } |
| } |
| |
| // Initialize classical L2 PM Interval Counters |
| if err := dh.pOnuMetricsMgr.PAdaptFsm.PFsm.Event(pmmgr.L2PmEventInit); err != nil { |
| // There is no way we should be landing here, but if we do then |
| // there is nothing much we can do about this other than log error |
| logger.Errorw(ctx, "error starting l2 pm fsm", log.Fields{"device-id": dh.device.Id, "err": err}) |
| } |
| |
| dh.SetReadyForOmciConfig(true) |
| |
| pDevEntry.MutexPersOnuConfig.RLock() |
| if dh.IsReconciling() && pDevEntry.SOnuPersistentData.PersUniDisableDone { |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| logger.Warn(ctx, "reconciling - uni-ports were disabled by admin before adapter restart - keep the ports locked", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.mutexForDisableDeviceRequested.Lock() |
| dh.disableDeviceRequested = true |
| dh.mutexForDisableDeviceRequested.Unlock() |
| dh.ReconcileDeviceTechProf(ctx) |
| // reconcilement will be continued after ani config is done |
| } else { |
| pDevEntry.MutexPersOnuConfig.RUnlock() |
| // *** should generate UniUnlockStateDone event ***** |
| dh.mutexForDisableDeviceRequested.RLock() |
| if !dh.disableDeviceRequested { |
| if dh.pUnlockStateFsm == nil { |
| dh.createUniLockFsm(ctx, false, cmn.UniUnlockStateDone) |
| } else { //UnlockStateFSM already init |
| dh.pUnlockStateFsm.SetSuccessEvent(cmn.UniUnlockStateDone) |
| dh.runUniLockFsm(ctx, false) |
| } |
| dh.mutexForDisableDeviceRequested.RUnlock() |
| } else { |
| dh.mutexForDisableDeviceRequested.RUnlock() |
| logger.Debugw(ctx, "Uni already lock", log.Fields{"device-id": dh.DeviceID}) |
| } |
| } |
| } |
| |
| func (dh *deviceHandler) processUniUnlockStateDoneEvent(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| dh.EnableUniPortStateUpdate(ctx) //cmp python yield self.enable_ports() |
| |
| if !dh.IsReconciling() { |
| logger.Infow(ctx, "UniUnlockStateDone event: Sending OnuUp event", log.Fields{"device-id": dh.DeviceID}) |
| raisedTs := time.Now().Unix() |
| go dh.sendOnuOperStateEvent(ctx, voltha.OperStatus_ACTIVE, dh.DeviceID, raisedTs) //cmp python onu_active_event |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| pDevEntry.MutexPersOnuConfig.Lock() |
| pDevEntry.SOnuPersistentData.PersUniUnlockDone = true |
| pDevEntry.MutexPersOnuConfig.Unlock() |
| if err := dh.StorePersistentData(ctx); err != nil { |
| logger.Warnw(ctx, "store persistent data error - continue for now as there will be additional write attempts", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } |
| } else { |
| logger.Info(ctx, "reconciling - don't notify core that onu went to active but trigger tech profile config", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.ReconcileDeviceTechProf(ctx) |
| |
| // reconcilement will be continued after ani config is done |
| |
| } |
| } |
| |
| func (dh *deviceHandler) processUniDisableStateDoneEvent(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| logger.Debugw(ctx, "DeviceStateUpdate upon disable", log.Fields{ |
| "OperStatus": voltha.OperStatus_UNKNOWN, "device-id": dh.DeviceID}) |
| |
| // disable device should have no impact on ConnStatus |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: connectStatusINVALID, //use some dummy value to prevent modification of the ConnStatus |
| OperStatus: voltha.OperStatus_UNKNOWN, |
| }); err != nil { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing |
| logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| } |
| |
| logger.Debugw(ctx, "DeviceReasonUpdate upon disable", log.Fields{"reason": cmn.DeviceReasonMap[cmn.DrOmciAdminLock], "device-id": dh.DeviceID}) |
| // DeviceReason to update acc.to modified py code as per beginning of Sept 2020 |
| _ = dh.ReasonUpdate(ctx, cmn.DrOmciAdminLock, true) |
| |
| //transfer the modified logical uni port state |
| dh.DisableUniPortStateUpdate(ctx) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| pDevEntry.MutexPersOnuConfig.Lock() |
| pDevEntry.SOnuPersistentData.PersUniDisableDone = true |
| pDevEntry.MutexPersOnuConfig.Unlock() |
| if err := dh.StorePersistentData(ctx); err != nil { |
| logger.Warnw(ctx, "store persistent data error - continue for now as there will be additional write attempts", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } |
| } |
| |
| func (dh *deviceHandler) processUniEnableStateDoneEvent(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| logger.Debugw(ctx, "DeviceStateUpdate upon re-enable", log.Fields{"ConnectStatus": voltha.ConnectStatus_REACHABLE, |
| "OperStatus": voltha.OperStatus_ACTIVE, "device-id": dh.DeviceID}) |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: voltha.ConnectStatus_REACHABLE, |
| OperStatus: voltha.OperStatus_ACTIVE, |
| }); err != nil { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing |
| logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| } |
| |
| logger.Debugw(ctx, "DeviceReasonUpdate upon re-enable", log.Fields{ |
| "reason": cmn.DeviceReasonMap[cmn.DrOnuReenabled], "device-id": dh.DeviceID}) |
| // DeviceReason to update acc.to modified py code as per beginning of Sept 2020 |
| _ = dh.ReasonUpdate(ctx, cmn.DrOnuReenabled, true) |
| |
| //transfer the modified logical uni port state |
| dh.EnableUniPortStateUpdate(ctx) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| pDevEntry.MutexPersOnuConfig.Lock() |
| pDevEntry.SOnuPersistentData.PersUniDisableDone = false |
| pDevEntry.MutexPersOnuConfig.Unlock() |
| if err := dh.StorePersistentData(ctx); err != nil { |
| logger.Warnw(ctx, "store persistent data error - continue for now as there will be additional write attempts", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } |
| } |
| |
| func (dh *deviceHandler) processUniEnableStateFailedEvent(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| logger.Debugw(ctx, "DeviceStateUpdate upon re-enable failure. ", log.Fields{ |
| "OperStatus": voltha.OperStatus_FAILED, "device-id": dh.DeviceID}) |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: connectStatusINVALID, //use some dummy value to prevent modification of the ConnStatus |
| OperStatus: voltha.OperStatus_FAILED, |
| }); err != nil { |
| logger.Errorw(ctx, "error-updating-device-state", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| } |
| } |
| |
| func (dh *deviceHandler) processOmciAniConfigDoneEvent(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| if devEvent == cmn.OmciAniConfigDone { |
| logger.Debugw(ctx, "OmciAniConfigDone event received", log.Fields{"device-id": dh.DeviceID}) |
| // attention: the device reason update is done based on ONU-UNI-Port related activity |
| // - which may cause some inconsistency |
| if dh.getDeviceReason() != cmn.DrTechProfileConfigDownloadSuccess { |
| // which may be the case from some previous activity even on this UNI Port (but also other UNI ports) |
| _ = dh.ReasonUpdate(ctx, cmn.DrTechProfileConfigDownloadSuccess, !dh.IsReconciling() || dh.IsReconcilingReasonUpdate()) |
| } |
| if dh.IsReconciling() { |
| // during reconciling with OMCI configuration in TT multi-UNI scenario, OmciAniConfigDone is reached several times |
| // therefore it must be ensured that reconciling of flow config is only started on the first pass of this code position |
| dh.mutexReconcilingFirstPassFlag.Lock() |
| if dh.reconcilingFirstPass { |
| logger.Info(ctx, "reconciling - OmciAniConfigDone first pass, start flow processing", log.Fields{"device-id": dh.DeviceID}) |
| dh.reconcilingFirstPass = false |
| go dh.ReconcileDeviceFlowConfig(ctx) |
| } |
| dh.mutexReconcilingFirstPassFlag.Unlock() |
| } |
| } else { // should be the OmciAniResourceRemoved block |
| logger.Debugw(ctx, "OmciAniResourceRemoved event received", log.Fields{"device-id": dh.DeviceID}) |
| // attention: the device reason update is done based on ONU-UNI-Port related activity |
| // - which may cause some inconsistency |
| if dh.getDeviceReason() != cmn.DrTechProfileConfigDeleteSuccess { |
| // which may be the case from some previous activity even on this ONU port (but also other UNI ports) |
| _ = dh.ReasonUpdate(ctx, cmn.DrTechProfileConfigDeleteSuccess, true) |
| } |
| } |
| } |
| |
| func (dh *deviceHandler) processOmciVlanFilterDoneEvent(ctx context.Context, aDevEvent cmn.OnuDeviceEvent) { |
| logger.Debugw(ctx, "OmciVlanFilterDone event received", |
| log.Fields{"device-id": dh.DeviceID, "event": aDevEvent}) |
| // attention: the device reason update is done based on ONU-UNI-Port related activity |
| // - which may cause some inconsistency |
| |
| if aDevEvent == cmn.OmciVlanFilterAddDone || aDevEvent == cmn.OmciVlanFilterAddDoneNoKvStore { |
| if dh.getDeviceReason() != cmn.DrOmciFlowsPushed { |
| // which may be the case from some previous activity on another UNI Port of the ONU |
| // or even some previous flow add activity on the same port |
| _ = dh.ReasonUpdate(ctx, cmn.DrOmciFlowsPushed, !dh.IsReconciling() || dh.IsReconcilingReasonUpdate()) |
| } |
| } else { |
| if dh.getDeviceReason() != cmn.DrOmciFlowsDeleted { |
| //not relevant for reconcile |
| _ = dh.ReasonUpdate(ctx, cmn.DrOmciFlowsDeleted, true) |
| } |
| } |
| |
| if aDevEvent == cmn.OmciVlanFilterAddDone || aDevEvent == cmn.OmciVlanFilterRemDone { |
| //events that request KvStore write |
| if err := dh.StorePersistentData(ctx); err != nil { |
| logger.Warnw(ctx, "store persistent data error - continue for now as there will be additional write attempts", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } |
| } else { |
| logger.Debugw(ctx, "OmciVlanFilter*Done* - write to KvStore not requested", |
| log.Fields{"device-id": dh.DeviceID}) |
| } |
| } |
| |
| // DeviceProcStatusUpdate evaluates possible processing events and initiates according next activities |
| func (dh *deviceHandler) DeviceProcStatusUpdate(ctx context.Context, devEvent cmn.OnuDeviceEvent) { |
| switch devEvent { |
| case cmn.MibDatabaseSync: |
| { |
| dh.processMibDatabaseSyncEvent(ctx, devEvent) |
| } |
| case cmn.UniLockStateDone: |
| { |
| dh.processUniLockStateDoneEvent(ctx, devEvent) |
| } |
| case cmn.MibDownloadDone: |
| { |
| dh.processMibDownloadDoneEvent(ctx, devEvent) |
| } |
| case cmn.UniUnlockStateDone: |
| { |
| dh.processUniUnlockStateDoneEvent(ctx, devEvent) |
| } |
| case cmn.UniEnableStateDone: |
| { |
| dh.processUniEnableStateDoneEvent(ctx, devEvent) |
| } |
| case cmn.UniEnableStateFailed: |
| { |
| dh.processUniEnableStateFailedEvent(ctx, devEvent) |
| } |
| case cmn.UniDisableStateDone: |
| { |
| dh.processUniDisableStateDoneEvent(ctx, devEvent) |
| } |
| case cmn.OmciAniConfigDone, cmn.OmciAniResourceRemoved: |
| { |
| dh.processOmciAniConfigDoneEvent(ctx, devEvent) |
| } |
| case cmn.OmciVlanFilterAddDone, cmn.OmciVlanFilterAddDoneNoKvStore, cmn.OmciVlanFilterRemDone, cmn.OmciVlanFilterRemDoneNoKvStore: |
| { |
| dh.processOmciVlanFilterDoneEvent(ctx, devEvent) |
| } |
| default: |
| { |
| logger.Debugw(ctx, "unhandled-device-event", log.Fields{"device-id": dh.DeviceID, "event": devEvent}) |
| } |
| } //switch |
| } |
| |
| func (dh *deviceHandler) addUniPort(ctx context.Context, aUniInstNo uint16, aUniID uint8, aPortType cmn.UniPortType) { |
| // parameters are IntfId, OnuId, uniId |
| uniNo := platform.MkUniPortNum(ctx, dh.pOnuIndication.GetIntfId(), dh.pOnuIndication.GetOnuId(), |
| uint32(aUniID)) |
| if _, present := dh.uniEntityMap[uniNo]; present { |
| logger.Warnw(ctx, "OnuUniPort-add: Port already exists", log.Fields{"device-id": dh.DeviceID, "for InstanceId": aUniInstNo}) |
| } else { |
| //with arguments aUniID, a_portNo, aPortType |
| pUniPort := cmn.NewOnuUniPort(ctx, aUniID, uniNo, aUniInstNo, aPortType) |
| if pUniPort == nil { |
| logger.Warnw(ctx, "OnuUniPort-add: Could not create Port", log.Fields{"device-id": dh.DeviceID, "for InstanceId": aUniInstNo}) |
| } else { |
| //store UniPort with the System-PortNumber key |
| dh.uniEntityMap[uniNo] = pUniPort |
| if !dh.IsReconciling() { |
| // create announce the UniPort to the core as VOLTHA Port object |
| if err := pUniPort.CreateVolthaPort(ctx, dh); err == nil { |
| logger.Infow(ctx, "OnuUniPort-added", log.Fields{"device-id": dh.DeviceID, "for PortNo": uniNo}) |
| } //error logging already within UniPort method |
| } else { |
| logger.Warn(ctx, "reconciling - OnuUniPort already added", log.Fields{"for PortNo": uniNo, "device-id": dh.DeviceID}) |
| } |
| } |
| } |
| } |
| |
| func (dh *deviceHandler) AddAllUniPorts(ctx context.Context) { |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| uniCnt := uint8(0) //UNI Port limit: see MaxUnisPerOnu (by now 16) (OMCI supports max 255 p.b.) |
| if pptpInstKeys := pDevEntry.GetOnuDB().GetSortedInstKeys( |
| ctx, me.PhysicalPathTerminationPointEthernetUniClassID); len(pptpInstKeys) > 0 { |
| for _, mgmtEntityID := range pptpInstKeys { |
| logger.Debugw(ctx, "Add PPTPEthUni port for MIB-stored instance:", log.Fields{ |
| "device-id": dh.DeviceID, "PPTPEthUni EntityID": mgmtEntityID}) |
| dh.addUniPort(ctx, mgmtEntityID, uniCnt, cmn.UniPPTP) |
| uniCnt++ |
| } |
| } else { |
| logger.Debugw(ctx, "No PPTP instances found", log.Fields{"device-id": dh.DeviceID}) |
| } |
| if veipInstKeys := pDevEntry.GetOnuDB().GetSortedInstKeys( |
| ctx, me.VirtualEthernetInterfacePointClassID); len(veipInstKeys) > 0 { |
| for _, mgmtEntityID := range veipInstKeys { |
| logger.Debugw(ctx, "Add VEIP for MIB-stored instance:", log.Fields{ |
| "device-id": dh.DeviceID, "VEIP EntityID": mgmtEntityID}) |
| dh.addUniPort(ctx, mgmtEntityID, uniCnt, cmn.UniVEIP) |
| uniCnt++ |
| } |
| } else { |
| logger.Debugw(ctx, "No VEIP instances found", log.Fields{"device-id": dh.DeviceID}) |
| } |
| if potsInstKeys := pDevEntry.GetOnuDB().GetSortedInstKeys( |
| ctx, me.PhysicalPathTerminationPointPotsUniClassID); len(potsInstKeys) > 0 { |
| for _, mgmtEntityID := range potsInstKeys { |
| logger.Debugw(ctx, "Add PPTP Pots UNI for MIB-stored instance:", log.Fields{ |
| "device-id": dh.DeviceID, "PPTP Pots UNI EntityID": mgmtEntityID}) |
| dh.addUniPort(ctx, mgmtEntityID, uniCnt, cmn.UniPPTPPots) |
| uniCnt++ |
| } |
| } else { |
| logger.Debugw(ctx, "No PPTP Pots UNI instances found", log.Fields{"device-id": dh.DeviceID}) |
| } |
| if uniCnt == 0 { |
| logger.Warnw(ctx, "No UniG instances found", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| |
| //Note: For the moment is is not required to include the (newly added) POTS ports into the range |
| // of flowCall or reconcile channels. But some sort of flow and reconcile processing might get necessary |
| // also for the POTS ports, so we include them already for future usage - should anyway do no great harm |
| dh.flowCbChan = make([]chan FlowCb, uniCnt) |
| dh.stopFlowMonitoringRoutine = make([]chan bool, uniCnt) |
| dh.isFlowMonitoringRoutineActive = make([]bool, uniCnt) |
| //chUniVlanConfigReconcilingDone needs to have the capacity of all UniPorts as flow reconcile may run parallel for all of them |
| dh.chUniVlanConfigReconcilingDone = make(chan uint16, uniCnt) |
| for i := 0; i < int(uniCnt); i++ { |
| dh.flowCbChan[i] = make(chan FlowCb, dh.pOpenOnuAc.config.MaxConcurrentFlowsPerUni) |
| dh.stopFlowMonitoringRoutine[i] = make(chan bool, 1) |
| } |
| } |
| |
| // EnableUniPortStateUpdate enables UniPortState and update core port state accordingly |
| func (dh *deviceHandler) EnableUniPortStateUpdate(ctx context.Context) { |
| // py code was updated 2003xx to activate the real ONU UNI ports per OMCI (VEIP or PPTP) |
| // but towards core only the first port active state is signaled |
| // with following remark: |
| // # TODO: for now only support the first UNI given no requirement for multiple uni yet. Also needed to reduce flow |
| // # load on the core |
| |
| // lock_ports(false) as done in py code here is shifted to separate call from device event processing |
| |
| for uniNo, uniPort := range dh.uniEntityMap { |
| // only if this port is validated for operState transfer |
| if (1<<uniPort.UniID)&dh.pOpenOnuAc.config.UniPortMask == (1 << uniPort.UniID) { |
| logger.Infow(ctx, "OnuUniPort-forced-OperState-ACTIVE", log.Fields{"for PortNo": uniNo, "device-id": dh.DeviceID}) |
| uniPort.SetOperState(vc.OperStatus_ACTIVE) |
| if !dh.IsReconciling() { |
| //maybe also use getter functions on uniPort - perhaps later ... |
| go func(port *cmn.OnuUniPort) { |
| if err := dh.updatePortStateInCore(ctx, &ca.PortState{ |
| DeviceId: dh.DeviceID, |
| PortType: voltha.Port_ETHERNET_UNI, |
| PortNo: port.PortNo, |
| OperStatus: port.OperState, |
| }); err != nil { |
| logger.Errorw(ctx, "port-state-update-failed", log.Fields{"error": err, "port-no": uniPort.PortNo, "device-id": dh.DeviceID}) |
| } |
| }(uniPort) |
| } else { |
| logger.Debug(ctx, "reconciling - don't notify core about PortStateUpdate", log.Fields{"device-id": dh.DeviceID}) |
| } |
| } |
| } |
| } |
| |
| // Disable UniPortState and update core port state accordingly |
| func (dh *deviceHandler) DisableUniPortStateUpdate(ctx context.Context) { |
| // compare EnableUniPortStateUpdate() above |
| // -> use current restriction to operate only on first UNI port as inherited from actual Py code |
| for uniNo, uniPort := range dh.uniEntityMap { |
| // only if this port is validated for operState transfer |
| |
| if (1<<uniPort.UniID)&dh.pOpenOnuAc.config.UniPortMask == (1 << uniPort.UniID) { |
| logger.Infow(ctx, "OnuUniPort-forced-OperState-UNKNOWN", log.Fields{"for PortNo": uniNo, "device-id": dh.DeviceID}) |
| uniPort.SetOperState(vc.OperStatus_UNKNOWN) |
| if !dh.IsReconciling() { |
| //maybe also use getter functions on uniPort - perhaps later ... |
| go func(port *cmn.OnuUniPort) { |
| if err := dh.updatePortStateInCore(ctx, &ca.PortState{ |
| DeviceId: dh.DeviceID, |
| PortType: voltha.Port_ETHERNET_UNI, |
| PortNo: port.PortNo, |
| OperStatus: port.OperState, |
| }); err != nil { |
| logger.Errorw(ctx, "port-state-update-failed", log.Fields{"error": err, "port-no": uniPort.PortNo, "device-id": dh.DeviceID}) |
| } |
| }(uniPort) |
| } else { |
| logger.Debug(ctx, "reconciling - don't notify core about PortStateUpdate", log.Fields{"device-id": dh.DeviceID}) |
| } |
| |
| } |
| } |
| } |
| |
| // ONU_Active/Inactive announcement on system KAFKA bus |
| // tried to re-use procedure of oltUpDownIndication from openolt_eventmgr.go with used values from Py code |
| func (dh *deviceHandler) sendOnuOperStateEvent(ctx context.Context, aOperState vc.OperStatus_Types, aDeviceID string, raisedTs int64) { |
| var de voltha.DeviceEvent |
| eventContext := make(map[string]string) |
| //Populating event context |
| // assume giving ParentId in GetDevice twice really gives the ParentDevice (there is no GetParentDevice()...) |
| parentDevice, err := dh.getDeviceFromCore(ctx, dh.parentID) |
| if err != nil || parentDevice == nil { |
| logger.Errorw(ctx, "Failed to fetch parent device for OnuEvent", |
| log.Fields{"device-id": dh.DeviceID, "parentID": dh.parentID, "err": err}) |
| return //TODO with VOL-3045: rw-core is unresponsive: report error and/or perform self-initiated onu-reset? |
| } |
| oltSerialNumber := parentDevice.SerialNumber |
| |
| eventContext["pon-id"] = strconv.FormatUint(uint64(dh.pOnuIndication.IntfId), 10) |
| eventContext["onu-id"] = strconv.FormatUint(uint64(dh.pOnuIndication.OnuId), 10) |
| eventContext["serial-number"] = dh.device.SerialNumber |
| eventContext["olt-serial-number"] = oltSerialNumber |
| eventContext["device-id"] = aDeviceID |
| eventContext["registration-id"] = aDeviceID //py: string(device_id)?? |
| eventContext["num-of-unis"] = strconv.Itoa(len(dh.uniEntityMap)) |
| if deviceEntry := dh.GetOnuDeviceEntry(ctx, false); deviceEntry != nil { |
| deviceEntry.MutexPersOnuConfig.RLock() |
| eventContext["vendor-id"] = deviceEntry.SOnuPersistentData.PersVendorID |
| eventContext["model"] = deviceEntry.SOnuPersistentData.PersVersion |
| eventContext["equipment-id"] = deviceEntry.SOnuPersistentData.PersEquipmentID |
| deviceEntry.MutexPersOnuConfig.RUnlock() |
| eventContext["software-version"] = deviceEntry.GetActiveImageVersion(ctx) |
| eventContext["inactive-software-version"] = deviceEntry.GetInactiveImageVersion(ctx) |
| logger.Debugw(ctx, "prepare ONU_ACTIVATED event", |
| log.Fields{"device-id": aDeviceID, "EventContext": eventContext}) |
| } else { |
| logger.Errorw(ctx, "Failed to fetch device-entry. ONU_ACTIVATED event is not sent", |
| log.Fields{"device-id": aDeviceID}) |
| return |
| } |
| |
| /* Populating device event body */ |
| de.Context = eventContext |
| de.ResourceId = aDeviceID |
| if aOperState == voltha.OperStatus_ACTIVE { |
| de.DeviceEventName = fmt.Sprintf("%s_%s", cOnuActivatedEvent, "RAISE_EVENT") |
| de.Description = fmt.Sprintf("%s Event - %s - %s", |
| cEventObjectType, cOnuActivatedEvent, "Raised") |
| } else { |
| de.DeviceEventName = fmt.Sprintf("%s_%s", cOnuActivatedEvent, "CLEAR_EVENT") |
| de.Description = fmt.Sprintf("%s Event - %s - %s", |
| cEventObjectType, cOnuActivatedEvent, "Cleared") |
| } |
| /* Send event to KAFKA */ |
| if err := dh.EventProxy.SendDeviceEventWithKey(ctx, &de, equipment, pon, raisedTs, aDeviceID); err != nil { |
| logger.Warnw(ctx, "could not send ONU_ACTIVATED event", |
| log.Fields{"device-id": aDeviceID, "error": err}) |
| } |
| logger.Infow(ctx, "ctx, ONU_ACTIVATED event sent to KAFKA", |
| log.Fields{"device-id": aDeviceID, "with-EventName": de.DeviceEventName}) |
| } |
| |
| // createUniLockFsm initializes and runs the UniLock FSM to transfer the OMCI related commands for port lock/unlock |
| func (dh *deviceHandler) createUniLockFsm(ctx context.Context, aAdminState bool, devEvent cmn.OnuDeviceEvent) { |
| chLSFsm := make(chan cmn.Message, 2) |
| var sFsmName string |
| if aAdminState { |
| logger.Debugw(ctx, "createLockStateFSM", log.Fields{"device-id": dh.DeviceID}) |
| sFsmName = "LockStateFSM" |
| } else { |
| logger.Debugw(ctx, "createUnlockStateFSM", log.Fields{"device-id": dh.DeviceID}) |
| sFsmName = "UnLockStateFSM" |
| } |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| pLSFsm := uniprt.NewLockStateFsm(ctx, aAdminState, devEvent, sFsmName, dh, pDevEntry, chLSFsm) |
| if pLSFsm != nil { |
| if aAdminState { |
| dh.pLockStateFsm = pLSFsm |
| } else { |
| dh.pUnlockStateFsm = pLSFsm |
| } |
| dh.runUniLockFsm(ctx, aAdminState) |
| } else { |
| logger.Errorw(ctx, "LockStateFSM could not be created - abort!!", log.Fields{"device-id": dh.DeviceID}) |
| } |
| } |
| |
| // runUniLockFsm starts the UniLock FSM to transfer the OMCI related commands for port lock/unlock |
| func (dh *deviceHandler) runUniLockFsm(ctx context.Context, aAdminState bool) { |
| /* Uni Port lock/unlock procedure - |
| ***** should run via 'adminDone' state and generate the argument requested event ***** |
| */ |
| var pLSStatemachine *fsm.FSM |
| if aAdminState { |
| pLSStatemachine = dh.pLockStateFsm.PAdaptFsm.PFsm |
| //make sure the opposite FSM is not running and if so, terminate it as not relevant anymore |
| if (dh.pUnlockStateFsm != nil) && |
| (dh.pUnlockStateFsm.PAdaptFsm.PFsm.Current() != uniprt.UniStDisabled) { |
| _ = dh.pUnlockStateFsm.PAdaptFsm.PFsm.Event(uniprt.UniEvReset) |
| } |
| } else { |
| pLSStatemachine = dh.pUnlockStateFsm.PAdaptFsm.PFsm |
| //make sure the opposite FSM is not running and if so, terminate it as not relevant anymore |
| if (dh.pLockStateFsm != nil) && |
| (dh.pLockStateFsm.PAdaptFsm.PFsm.Current() != uniprt.UniStDisabled) { |
| _ = dh.pLockStateFsm.PAdaptFsm.PFsm.Event(uniprt.UniEvReset) |
| } |
| } |
| if pLSStatemachine != nil { |
| if pLSStatemachine.Is(uniprt.UniStDisabled) { |
| if err := pLSStatemachine.Event(uniprt.UniEvStart); err != nil { |
| logger.Warnw(ctx, "LockStateFSM: can't start", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } else { |
| /***** LockStateFSM started */ |
| logger.Debugw(ctx, "LockStateFSM started", log.Fields{ |
| "state": pLSStatemachine.Current(), "device-id": dh.DeviceID}) |
| } |
| } else { |
| logger.Warnw(ctx, "wrong state of LockStateFSM - want: disabled", log.Fields{ |
| "have": pLSStatemachine.Current(), "device-id": dh.DeviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } |
| } else { |
| logger.Errorw(ctx, "LockStateFSM StateMachine invalid - cannot be executed!!", log.Fields{"device-id": dh.DeviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } |
| } |
| |
| // createOnuUpgradeFsm initializes and runs the Onu Software upgrade FSM |
| // precondition: lockUpgradeFsm is already locked from caller of this function |
| func (dh *deviceHandler) createOnuUpgradeFsm(ctx context.Context, apDevEntry *mib.OnuDeviceEntry, aDevEvent cmn.OnuDeviceEvent) error { |
| chUpgradeFsm := make(chan cmn.Message, 2) |
| var sFsmName = "OnuSwUpgradeFSM" |
| logger.Debugw(ctx, "create OnuSwUpgradeFSM", log.Fields{"device-id": dh.DeviceID}) |
| if apDevEntry.PDevOmciCC == nil { |
| logger.Errorw(ctx, "no valid OnuDevice or omciCC - abort", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf(fmt.Sprintf("no valid omciCC - abort for device-id: %s", dh.device.Id)) |
| } |
| dh.pOnuUpradeFsm = swupg.NewOnuUpgradeFsm(ctx, dh, apDevEntry, apDevEntry.GetOnuDB(), aDevEvent, |
| sFsmName, chUpgradeFsm) |
| if dh.pOnuUpradeFsm != nil { |
| pUpgradeStatemachine := dh.pOnuUpradeFsm.PAdaptFsm.PFsm |
| if pUpgradeStatemachine != nil { |
| if pUpgradeStatemachine.Is(swupg.UpgradeStDisabled) { |
| if err := pUpgradeStatemachine.Event(swupg.UpgradeEvStart); err != nil { |
| logger.Errorw(ctx, "OnuSwUpgradeFSM: can't start", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| return fmt.Errorf(fmt.Sprintf("OnuSwUpgradeFSM could not be started for device-id: %s", dh.device.Id)) |
| } |
| /***** Upgrade FSM started */ |
| //reset the last stored upgrade states (which anyway should be don't care as long as the newly created FSM exists) |
| (*dh.pLastUpgradeImageState).DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN |
| (*dh.pLastUpgradeImageState).Reason = voltha.ImageState_NO_ERROR |
| (*dh.pLastUpgradeImageState).ImageState = voltha.ImageState_IMAGE_UNKNOWN |
| logger.Debugw(ctx, "OnuSwUpgradeFSM started", log.Fields{ |
| "state": pUpgradeStatemachine.Current(), "device-id": dh.DeviceID}) |
| } else { |
| logger.Errorw(ctx, "wrong state of OnuSwUpgradeFSM to start - want: disabled", log.Fields{ |
| "have": pUpgradeStatemachine.Current(), "device-id": dh.DeviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| return fmt.Errorf(fmt.Sprintf("OnuSwUpgradeFSM could not be started for device-id: %s, wrong internal state", dh.device.Id)) |
| } |
| } else { |
| logger.Errorw(ctx, "OnuSwUpgradeFSM internal FSM invalid - cannot be executed!!", log.Fields{"device-id": dh.DeviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| return fmt.Errorf(fmt.Sprintf("OnuSwUpgradeFSM internal FSM could not be created for device-id: %s", dh.device.Id)) |
| } |
| } else { |
| logger.Errorw(ctx, "OnuSwUpgradeFSM could not be created - abort", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf(fmt.Sprintf("OnuSwUpgradeFSM could not be created - abort for device-id: %s", dh.device.Id)) |
| } |
| return nil |
| } |
| |
| // RemoveOnuUpgradeFsm clears the Onu Software upgrade FSM |
| func (dh *deviceHandler) RemoveOnuUpgradeFsm(ctx context.Context, apImageState *voltha.ImageState) { |
| logger.Debugw(ctx, "remove OnuSwUpgradeFSM StateMachine", log.Fields{ |
| "device-id": dh.DeviceID}) |
| dh.lockUpgradeFsm.Lock() |
| dh.pOnuUpradeFsm = nil //resource clearing is left to garbage collector |
| dh.upgradeCanceled = false //cancelation done |
| dh.pLastUpgradeImageState = apImageState |
| dh.lockUpgradeFsm.Unlock() |
| //signal upgradeFsm removed using non-blocking channel send |
| select { |
| case dh.upgradeFsmChan <- struct{}{}: |
| default: |
| logger.Debugw(ctx, "removed-UpgradeFsm signal not send on upgradeFsmChan (no receiver)", log.Fields{ |
| "device-id": dh.DeviceID}) |
| } |
| } |
| |
| // checkOnOnuImageCommit verifies if the ONU is in some upgrade state that allows for image commit and if tries to commit |
| func (dh *deviceHandler) checkOnOnuImageCommit(ctx context.Context) { |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, false) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice -aborting checkOnOnuImageCommit", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| |
| dh.lockUpgradeFsm.RLock() |
| //lockUpgradeFsm must be release before cancellation as this may implicitly request RemoveOnuUpgradeFsm() |
| if dh.pOnuUpradeFsm != nil { |
| if dh.upgradeCanceled { //avoid starting some new action in case it is already doing the cancelation |
| dh.lockUpgradeFsm.RUnlock() |
| logger.Errorw(ctx, "Some upgrade procedure still runs cancelation - abort", log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| pUpgradeStatemachine := dh.pOnuUpradeFsm.PAdaptFsm.PFsm |
| if pUpgradeStatemachine != nil { |
| // commit is only processed in case out upgrade FSM indicates the according state (for automatic commit) |
| // (some manual forced commit could do without) |
| UpgradeState := pUpgradeStatemachine.Current() |
| if (UpgradeState == swupg.UpgradeStWaitForCommit) || |
| (UpgradeState == swupg.UpgradeStRequestingActivate) { |
| // also include UpgradeStRequestingActivate as it may be left in case the ActivateResponse just got lost |
| // here no need to update the upgrade image state to activated as the state will be immediately be set to committing |
| if pDevEntry.IsImageToBeCommitted(ctx, dh.pOnuUpradeFsm.InactiveImageMeID) { |
| activeImageID, errImg := pDevEntry.GetActiveImageMeID(ctx) |
| if errImg != nil { |
| dh.lockUpgradeFsm.RUnlock() |
| logger.Errorw(ctx, "OnuSwUpgradeFSM abort - could not get active image after reboot", |
| log.Fields{"device-id": dh.DeviceID}) |
| if !dh.upgradeCanceled { //avoid double cancelation in case it is already doing the cancelation |
| dh.upgradeCanceled = true |
| dh.pOnuUpradeFsm.CancelProcessing(ctx, true, voltha.ImageState_CANCELLED_ON_ONU_STATE) //complete abort |
| } |
| return |
| } |
| dh.lockUpgradeFsm.RUnlock() |
| if activeImageID == dh.pOnuUpradeFsm.InactiveImageMeID { |
| if (UpgradeState == swupg.UpgradeStRequestingActivate) && !dh.pOnuUpradeFsm.GetCommitFlag(ctx) { |
| // if FSM was waiting on activateResponse, new image is active, but FSM shall not commit, then: |
| if err := pUpgradeStatemachine.Event(swupg.UpgradeEvActivationDone); err != nil { |
| logger.Errorw(ctx, "OnuSwUpgradeFSM: can't call activate-done event", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| return |
| } |
| logger.Debugw(ctx, "OnuSwUpgradeFSM activate-done after reboot", log.Fields{ |
| "state": UpgradeState, "device-id": dh.DeviceID}) |
| } else { |
| //FSM in waitForCommit or (UpgradeStRequestingActivate [lost ActivateResp] and commit allowed) |
| if err := pUpgradeStatemachine.Event(swupg.UpgradeEvCommitSw); err != nil { |
| logger.Errorw(ctx, "OnuSwUpgradeFSM: can't call commit event", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| return |
| } |
| logger.Debugw(ctx, "OnuSwUpgradeFSM commit image requested", log.Fields{ |
| "state": UpgradeState, "device-id": dh.DeviceID}) |
| } |
| } else { |
| logger.Errorw(ctx, "OnuSwUpgradeFSM waiting to commit/on ActivateResponse, but load did not start with expected image Id", |
| log.Fields{"device-id": dh.DeviceID}) |
| if !dh.upgradeCanceled { //avoid double cancelation in case it is already doing the cancelation |
| dh.upgradeCanceled = true |
| dh.pOnuUpradeFsm.CancelProcessing(ctx, true, voltha.ImageState_CANCELLED_ON_ONU_STATE) //complete abort |
| } |
| } |
| return |
| } |
| dh.lockUpgradeFsm.RUnlock() |
| logger.Errorw(ctx, "OnuSwUpgradeFSM waiting to commit, but nothing to commit on ONU - abort upgrade", |
| log.Fields{"device-id": dh.DeviceID}) |
| if !dh.upgradeCanceled { //avoid double cancelation in case it is already doing the cancelation |
| dh.upgradeCanceled = true |
| dh.pOnuUpradeFsm.CancelProcessing(ctx, true, voltha.ImageState_CANCELLED_ON_ONU_STATE) //complete abort |
| } |
| return |
| } |
| //upgrade FSM is active but not waiting for commit: maybe because commit flag is not set |
| // upgrade FSM is to be informed if the current active image is the one that was used in upgrade for the download |
| if activeImageID, err := pDevEntry.GetActiveImageMeID(ctx); err == nil { |
| if dh.pOnuUpradeFsm.InactiveImageMeID == activeImageID { |
| logger.Debugw(ctx, "OnuSwUpgradeFSM image state set to activated", log.Fields{ |
| "state": pUpgradeStatemachine.Current(), "device-id": dh.DeviceID}) |
| dh.pOnuUpradeFsm.SetImageStateActive(ctx) |
| } |
| } |
| } |
| } else { |
| logger.Debugw(ctx, "no ONU image to be committed", log.Fields{"device-id": dh.DeviceID}) |
| } |
| dh.lockUpgradeFsm.RUnlock() |
| } |
| |
| // SetBackend provides a DB backend for the specified path on the existing KV client |
| func (dh *deviceHandler) SetBackend(ctx context.Context, aBasePathKvStore string) *db.Backend { |
| |
| logger.Debugw(ctx, "SetKVStoreBackend", log.Fields{"IpTarget": dh.pOpenOnuAc.KVStoreAddress, |
| "BasePathKvStore": aBasePathKvStore, "device-id": dh.DeviceID}) |
| // kvbackend := db.NewBackend(ctx, dh.pOpenOnuAc.KVStoreType, dh.pOpenOnuAc.KVStoreAddress, dh.pOpenOnuAc.KVStoreTimeout, aBasePathKvStore) |
| kvbackend := &db.Backend{ |
| Client: dh.pOpenOnuAc.kvClient, |
| StoreType: dh.pOpenOnuAc.KVStoreType, |
| /* address config update acc. to [VOL-2736] */ |
| Address: dh.pOpenOnuAc.KVStoreAddress, |
| Timeout: dh.pOpenOnuAc.KVStoreTimeout, |
| PathPrefix: aBasePathKvStore} |
| |
| return kvbackend |
| } |
| func (dh *deviceHandler) getFlowOfbFields(ctx context.Context, apFlowItem *of.OfpFlowStats, loMatchVlan *uint16, |
| loMatchPcp *uint8, loIPProto *uint32) { |
| |
| for _, field := range flow.GetOfbFields(apFlowItem) { |
| switch field.Type { |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_ETH_TYPE: |
| { |
| logger.Debugw(ctx, "flow type EthType", log.Fields{"device-id": dh.DeviceID, |
| "EthType": strconv.FormatInt(int64(field.GetEthType()), 16)}) |
| } |
| /* TT related temporary workaround - should not be needed anymore |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_IP_PROTO: |
| { |
| *loIPProto = field.GetIpProto() |
| logger.Debugw("flow type IpProto", log.Fields{"device-id": dh.DeviceID, |
| "IpProto": strconv.FormatInt(int64(*loIPProto), 16)}) |
| if *loIPProto == 2 { |
| // some workaround for TT workflow at proto == 2 (IGMP trap) -> ignore the flow |
| // avoids installing invalid EVTOCD rule |
| logger.Debugw("flow type IpProto 2: TT workaround: ignore flow", |
| log.Fields{"device-id": dh.DeviceID}) |
| return |
| } |
| } |
| */ |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_VLAN_VID: |
| { |
| *loMatchVlan = uint16(field.GetVlanVid()) |
| loMatchVlanMask := uint16(field.GetVlanVidMask()) |
| if !(*loMatchVlan == uint16(of.OfpVlanId_OFPVID_PRESENT) && |
| loMatchVlanMask == uint16(of.OfpVlanId_OFPVID_PRESENT)) { |
| *loMatchVlan = *loMatchVlan & 0xFFF // not transparent: copy only ID bits |
| } |
| logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.DeviceID, |
| "VID": strconv.FormatInt(int64(*loMatchVlan), 16)}) |
| } |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_VLAN_PCP: |
| { |
| *loMatchPcp = uint8(field.GetVlanPcp()) |
| logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.DeviceID, |
| "PCP": loMatchPcp}) |
| } |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_UDP_DST: |
| { |
| logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.DeviceID, |
| "UDP-DST": strconv.FormatInt(int64(field.GetUdpDst()), 16)}) |
| } |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_UDP_SRC: |
| { |
| logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.DeviceID, |
| "UDP-SRC": strconv.FormatInt(int64(field.GetUdpSrc()), 16)}) |
| } |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_IPV4_DST: |
| { |
| logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.DeviceID, |
| "IPv4-DST": field.GetIpv4Dst()}) |
| } |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_IPV4_SRC: |
| { |
| logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.DeviceID, |
| "IPv4-SRC": field.GetIpv4Src()}) |
| } |
| case of.OxmOfbFieldTypes_OFPXMT_OFB_METADATA: |
| { |
| logger.Debugw(ctx, "flow field type", log.Fields{"device-id": dh.DeviceID, |
| "Metadata": field.GetTableMetadata()}) |
| } |
| /* |
| default: |
| { |
| //all other entires ignored |
| } |
| */ |
| } |
| } //for all OfbFields |
| } |
| |
| func (dh *deviceHandler) getFlowActions(ctx context.Context, apFlowItem *of.OfpFlowStats, loSetPcp *uint8, loSetVlan *uint16) { |
| for _, action := range flow.GetActions(apFlowItem) { |
| switch action.Type { |
| /* not used: |
| case of.OfpActionType_OFPAT_OUTPUT: |
| { |
| logger.Debugw("flow action type", log.Fields{"device-id": dh.DeviceID, |
| "Output": action.GetOutput()}) |
| } |
| */ |
| case of.OfpActionType_OFPAT_PUSH_VLAN: |
| { |
| logger.Debugw(ctx, "flow action type", log.Fields{"device-id": dh.DeviceID, |
| "PushEthType": strconv.FormatInt(int64(action.GetPush().Ethertype), 16)}) |
| } |
| case of.OfpActionType_OFPAT_SET_FIELD: |
| { |
| pActionSetField := action.GetSetField() |
| if pActionSetField.Field.OxmClass != of.OfpOxmClass_OFPXMC_OPENFLOW_BASIC { |
| logger.Warnw(ctx, "flow action SetField invalid OxmClass (ignored)", log.Fields{"device-id": dh.DeviceID, |
| "OxcmClass": pActionSetField.Field.OxmClass}) |
| } |
| if pActionSetField.Field.GetOfbField().Type == of.OxmOfbFieldTypes_OFPXMT_OFB_VLAN_VID { |
| *loSetVlan = uint16(pActionSetField.Field.GetOfbField().GetVlanVid()) |
| logger.Debugw(ctx, "flow Set VLAN from SetField action", log.Fields{"device-id": dh.DeviceID, |
| "SetVlan": strconv.FormatInt(int64(*loSetVlan), 16)}) |
| } else if pActionSetField.Field.GetOfbField().Type == of.OxmOfbFieldTypes_OFPXMT_OFB_VLAN_PCP { |
| *loSetPcp = uint8(pActionSetField.Field.GetOfbField().GetVlanPcp()) |
| logger.Debugw(ctx, "flow Set PCP from SetField action", log.Fields{"device-id": dh.DeviceID, |
| "SetPcp": *loSetPcp}) |
| } else { |
| logger.Warnw(ctx, "flow action SetField invalid FieldType", log.Fields{"device-id": dh.DeviceID, |
| "Type": pActionSetField.Field.GetOfbField().Type}) |
| } |
| } |
| /* |
| default: |
| { |
| //all other entires ignored |
| } |
| */ |
| } |
| } //for all Actions |
| } |
| |
| // addFlowItemToUniPort parses the actual flow item to add it to the UniPort |
| func (dh *deviceHandler) addFlowItemToUniPort(ctx context.Context, apFlowItem *of.OfpFlowStats, apUniPort *cmn.OnuUniPort, |
| apFlowMetaData *of.FlowMetadata, respChan *chan error) { |
| var loSetVlan uint16 = uint16(of.OfpVlanId_OFPVID_NONE) //noValidEntry |
| var loMatchVlan uint16 = uint16(of.OfpVlanId_OFPVID_PRESENT) //reserved VLANID entry |
| var loSetPcp uint8 |
| var loMatchPcp uint8 = 8 // could the const 'cPrioDoNotFilter' be used from omci_vlan_config.go ? |
| var loIPProto uint32 |
| /* the TechProfileId is part of the flow Metadata - compare also comment within |
| * OLT-Adapter:openolt_flowmgr.go |
| * Metadata 8 bytes: |
| * Most Significant 2 Bytes = Inner VLAN |
| * Next 2 Bytes = Tech Profile ID(TPID) |
| * Least Significant 4 Bytes = Port ID |
| * Flow Metadata carries Tech-Profile (TP) ID and is mandatory in all |
| * subscriber related flows. |
| */ |
| |
| metadata := flow.GetMetadataFromWriteMetadataAction(ctx, apFlowItem) |
| if metadata == 0 { |
| logger.Debugw(ctx, "flow-add invalid metadata - abort", |
| log.Fields{"device-id": dh.DeviceID}) |
| *respChan <- fmt.Errorf("flow-add invalid metadata: %s", dh.DeviceID) |
| } |
| loTpID := uint8(flow.GetTechProfileIDFromWriteMetaData(ctx, metadata)) |
| loCookie := apFlowItem.GetCookie() |
| loCookieSlice := []uint64{loCookie} |
| loInnerCvlan := flow.GetInnerTagFromWriteMetaData(ctx, metadata) |
| logger.Debugw(ctx, "flow-add base indications", log.Fields{"device-id": dh.DeviceID, |
| "TechProf-Id": loTpID, "cookie": loCookie, "innerCvlan": loInnerCvlan}) |
| |
| dh.getFlowOfbFields(ctx, apFlowItem, &loMatchVlan, &loMatchPcp, &loIPProto) |
| /* TT related temporary workaround - should not be needed anymore |
| if loIPProto == 2 { |
| // some workaround for TT workflow at proto == 2 (IGMP trap) -> ignore the flow |
| // avoids installing invalid EVTOCD rule |
| logger.Debugw("flow-add type IpProto 2: TT workaround: ignore flow", |
| log.Fields{"device-id": dh.DeviceID}) |
| return nil |
| } |
| */ |
| dh.getFlowActions(ctx, apFlowItem, &loSetPcp, &loSetVlan) |
| |
| if loSetVlan == uint16(of.OfpVlanId_OFPVID_NONE) && loMatchVlan != uint16(of.OfpVlanId_OFPVID_PRESENT) && (loMatchPcp == 8) && |
| loInnerCvlan == uint16(of.OfpVlanId_OFPVID_NONE) { |
| logger.Errorw(ctx, "flow-add aborted - SetVlanId undefined, but MatchVid set", log.Fields{ |
| "device-id": dh.DeviceID, "UniPort": apUniPort.PortNo, |
| "set_vid": strconv.FormatInt(int64(loSetVlan), 16), |
| "match_vid": strconv.FormatInt(int64(loMatchVlan), 16)}) |
| //TODO!!: Use DeviceId within the error response to rwCore |
| // likewise also in other error response cases to calling components as requested in [VOL-3458] |
| *respChan <- fmt.Errorf("flow-add Set/Match VlanId inconsistent: %s", dh.DeviceID) |
| } |
| if loSetVlan == uint16(of.OfpVlanId_OFPVID_NONE) && loMatchVlan == uint16(of.OfpVlanId_OFPVID_PRESENT) { |
| logger.Debugw(ctx, "flow-add vlan-any/copy", log.Fields{"device-id": dh.DeviceID}) |
| loSetVlan = loMatchVlan //both 'transparent' (copy any) |
| } else if loSetVlan == uint16(of.OfpVlanId_OFPVID_NONE) && loMatchVlan != uint16(of.OfpVlanId_OFPVID_PRESENT) && |
| loInnerCvlan != uint16(of.OfpVlanId_OFPVID_NONE) { |
| loSetVlan = loMatchVlan |
| logger.Debugw(ctx, "flow-add, double tagged case, set setvlan to matchvlan ", log.Fields{"device-id": dh.DeviceID, "loSetVlan": loSetVlan, "loMatchVlan": loMatchVlan}) |
| } else { |
| //looks like OMCI value 4097 (copyFromOuter - for Uni double tagged) is not supported here |
| if loSetVlan != uint16(of.OfpVlanId_OFPVID_PRESENT) { |
| // not set to transparent |
| loSetVlan &= 0x0FFF //mask VID bits as prerequisite for vlanConfigFsm |
| } |
| logger.Debugw(ctx, "flow-add vlan-set", log.Fields{"device-id": dh.DeviceID}) |
| } |
| |
| var meter *of.OfpMeterConfig |
| if apFlowMetaData != nil { |
| meter = apFlowMetaData.Meters[0] |
| } |
| //mutex protection as the update_flow rpc maybe running concurrently for different flows, perhaps also activities |
| // must be set including the execution of createVlanFilterFsm() to avoid unintended creation of FSM's |
| // when different rules are requested concurrently for the same uni |
| // (also vlan persistency data does not support multiple FSM's on the same UNI correctly!) |
| dh.lockVlanAdd.Lock() //prevent multiple add activities to start in parallel |
| dh.lockVlanConfig.RLock() //read protection on UniVlanConfigFsmMap (removeFlowItemFromUniPort) |
| logger.Debugw(ctx, "flow-add got lock", log.Fields{"device-id": dh.DeviceID, "tpID": loTpID, "uniID": apUniPort.UniID}) |
| if _, exist := dh.UniVlanConfigFsmMap[apUniPort.UniID]; exist { |
| //SetUniFlowParams() may block on some rule that is suspended-to-add |
| // in order to allow for according flow removal lockVlanConfig may only be used with RLock here |
| // Also the error is returned to caller via response channel |
| _ = dh.UniVlanConfigFsmMap[apUniPort.UniID].SetUniFlowParams(ctx, loTpID, loCookieSlice, |
| loMatchVlan, loMatchPcp, loSetVlan, loSetPcp, loInnerCvlan, false, meter, respChan) |
| dh.lockVlanConfig.RUnlock() |
| dh.lockVlanAdd.Unlock() //re-admit new Add-flow-processing |
| return |
| } |
| dh.lockVlanConfig.RUnlock() |
| dh.lockVlanConfig.Lock() //createVlanFilterFsm should always be a non-blocking operation and requires r+w lock |
| err := dh.createVlanFilterFsm(ctx, apUniPort, loTpID, loCookieSlice, |
| loMatchVlan, loMatchPcp, loSetVlan, loSetPcp, loInnerCvlan, cmn.OmciVlanFilterAddDone, false, meter, respChan) |
| dh.lockVlanConfig.Unlock() |
| dh.lockVlanAdd.Unlock() //re-admit new Add-flow-processing |
| if err != nil { |
| *respChan <- err |
| } |
| } |
| |
| // removeFlowItemFromUniPort parses the actual flow item to remove it from the UniPort |
| func (dh *deviceHandler) removeFlowItemFromUniPort(ctx context.Context, apFlowItem *of.OfpFlowStats, apUniPort *cmn.OnuUniPort, respChan *chan error) { |
| //optimization and assumption: the flow cookie uniquely identifies the flow and with that the internal rule |
| //hence only the cookie is used here to find the relevant flow and possibly remove the rule |
| //no extra check is done on the rule parameters |
| //accordingly the removal is done only once - for the first found flow with that cookie, even though |
| // at flow creation is not assured, that the same cookie is not configured for different flows - just assumed |
| //additionally it is assumed here, that removal can only be done for one cookie per flow in a sequence (different |
| // from addFlow - where at reconcilement multiple cookies per flow ) can be configured in one sequence) |
| // - some possible 'delete-all' sequence would have to be implemented separately (where the cookies are don't care anyway) |
| loCookie := apFlowItem.GetCookie() |
| logger.Debugw(ctx, "flow-remove base indications", log.Fields{"device-id": dh.DeviceID, "cookie": loCookie}) |
| |
| /* TT related temporary workaround - should not be needed anymore |
| for _, field := range flow.GetOfbFields(apFlowItem) { |
| if field.Type == of.OxmOfbFieldTypes_OFPXMT_OFB_IP_PROTO { |
| loIPProto := field.GetIpProto() |
| logger.Debugw(ctx, "flow type IpProto", log.Fields{"device-id": dh.DeviceID, |
| "IpProto": strconv.FormatInt(int64(loIPProto), 16)}) |
| if loIPProto == 2 { |
| // some workaround for TT workflow on proto == 2 (IGMP trap) -> the flow was not added, no need to remove |
| logger.Debugw(ctx, "flow-remove type IpProto 2: TT workaround: ignore flow", |
| log.Fields{"device-id": dh.DeviceID}) |
| return nil |
| } |
| } |
| } //for all OfbFields |
| */ |
| |
| //mutex protection as the update_flow rpc maybe running concurrently for different flows, perhaps also activities |
| dh.lockVlanConfig.RLock() |
| defer dh.lockVlanConfig.RUnlock() |
| logger.Debugw(ctx, "flow-remove got RLock", log.Fields{"device-id": dh.DeviceID, "uniID": apUniPort.UniID}) |
| if _, exist := dh.UniVlanConfigFsmMap[apUniPort.UniID]; exist { |
| _ = dh.UniVlanConfigFsmMap[apUniPort.UniID].RemoveUniFlowParams(ctx, loCookie, respChan) |
| return |
| } |
| logger.Debugw(ctx, "flow-remove called, but no flow is configured (no VlanConfigFsm, flow already removed) ", |
| log.Fields{"device-id": dh.DeviceID}) |
| //but as we regard the flow as not existing = removed we respond just ok |
| // and treat the reason accordingly (which in the normal removal procedure is initiated by the FSM) |
| // Push response on the response channel |
| if respChan != nil { |
| // Do it in a non blocking fashion, so that in case the flow handler routine has shutdown for any reason, we do not block here |
| select { |
| case *respChan <- nil: |
| logger.Debugw(ctx, "submitted-response-for-flow", log.Fields{"device-id": dh.DeviceID, "err": nil}) |
| default: |
| } |
| } |
| go dh.DeviceProcStatusUpdate(ctx, cmn.OmciVlanFilterRemDone) |
| } |
| |
| // createVlanFilterFsm initializes and runs the VlanFilter FSM to transfer OMCI related VLAN config |
| // if this function is called from possibly concurrent processes it must be mutex-protected from the caller! |
| // precondition: dh.lockVlanConfig is locked by the caller! |
| func (dh *deviceHandler) createVlanFilterFsm(ctx context.Context, apUniPort *cmn.OnuUniPort, aTpID uint8, aCookieSlice []uint64, |
| aMatchVlan uint16, aMatchPcp uint8, aSetVlan uint16, aSetPcp uint8, innerCvlan uint16, aDevEvent cmn.OnuDeviceEvent, lastFlowToReconcile bool, aMeter *of.OfpMeterConfig, respChan *chan error) error { |
| chVlanFilterFsm := make(chan cmn.Message, 2) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice -aborting", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice for device-id %x - aborting", dh.DeviceID) |
| } |
| |
| if dh.pDeviceStateFsm.Current() == devStDown { |
| logger.Warnw(ctx, "UniVlanConfigFsm : aborting, device state down", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("device state down for device-id %x - aborting", dh.DeviceID) |
| } |
| |
| pVlanFilterFsm := avcfg.NewUniVlanConfigFsm(ctx, dh, pDevEntry, pDevEntry.PDevOmciCC, apUniPort, dh.pOnuTP, |
| pDevEntry.GetOnuDB(), aTpID, aDevEvent, "UniVlanConfigFsm", chVlanFilterFsm, |
| dh.pOpenOnuAc.AcceptIncrementalEvto, aCookieSlice, aMatchVlan, aMatchPcp, aSetVlan, aSetPcp, innerCvlan, lastFlowToReconcile, aMeter, respChan) |
| if pVlanFilterFsm != nil { |
| //dh.lockVlanConfig is locked (by caller) throughout the state transition to 'starting' |
| // to prevent unintended (ignored) events to be sent there (from parallel processing) |
| dh.UniVlanConfigFsmMap[apUniPort.UniID] = pVlanFilterFsm |
| pVlanFilterStatemachine := pVlanFilterFsm.PAdaptFsm.PFsm |
| if pVlanFilterStatemachine != nil { |
| if pVlanFilterStatemachine.Is(avcfg.VlanStDisabled) { |
| if err := pVlanFilterStatemachine.Event(avcfg.VlanEvStart); err != nil { |
| logger.Warnw(ctx, "UniVlanConfigFsm: can't start", |
| log.Fields{"device-id": dh.DeviceID, "err": err}) |
| return fmt.Errorf("can't start UniVlanConfigFsm for device-id %x", dh.DeviceID) |
| } |
| /***** UniVlanConfigFsm started */ |
| logger.Debugw(ctx, "UniVlanConfigFsm started", log.Fields{ |
| "state": pVlanFilterStatemachine.Current(), "device-id": dh.DeviceID, |
| "UniPort": apUniPort.PortNo}) |
| } else { |
| logger.Warnw(ctx, "wrong state of UniVlanConfigFsm - want: disabled", log.Fields{ |
| "have": pVlanFilterStatemachine.Current(), "device-id": dh.DeviceID}) |
| return fmt.Errorf("uniVlanConfigFsm not in expected disabled state for device-id %x", dh.DeviceID) |
| } |
| } else { |
| logger.Errorw(ctx, "UniVlanConfigFsm StateMachine invalid - cannot be executed!!", log.Fields{ |
| "device-id": dh.DeviceID}) |
| return fmt.Errorf("uniVlanConfigFsm invalid for device-id %x", dh.DeviceID) |
| } |
| } else { |
| logger.Errorw(ctx, "UniVlanConfigFsm could not be created - abort!!", log.Fields{ |
| "device-id": dh.DeviceID, "UniPort": apUniPort.PortNo}) |
| return fmt.Errorf("uniVlanConfigFsm could not be created for device-id %x", dh.DeviceID) |
| } |
| return nil |
| } |
| |
| // VerifyVlanConfigRequest checks on existence of a given uniPort |
| // and starts verification of flow config based on that |
| func (dh *deviceHandler) VerifyVlanConfigRequest(ctx context.Context, aUniID uint8, aTpID uint8) { |
| //ensure that the given uniID is available (configured) in the UniPort class (used for OMCI entities) |
| var pCurrentUniPort *cmn.OnuUniPort |
| for _, uniPort := range dh.uniEntityMap { |
| // only if this port is validated for operState transfer |
| if uniPort.UniID == uint8(aUniID) { |
| pCurrentUniPort = uniPort |
| break //found - end search loop |
| } |
| } |
| if pCurrentUniPort == nil { |
| logger.Debugw(ctx, "VerifyVlanConfig aborted: requested uniID not found in PortDB", |
| log.Fields{"device-id": dh.DeviceID, "uni-id": aUniID}) |
| return |
| } |
| dh.VerifyUniVlanConfigRequest(ctx, pCurrentUniPort, aTpID) |
| } |
| |
| // VerifyUniVlanConfigRequest checks on existence of flow configuration and starts it accordingly |
| func (dh *deviceHandler) VerifyUniVlanConfigRequest(ctx context.Context, apUniPort *cmn.OnuUniPort, aTpID uint8) { |
| //TODO!! verify and start pending flow configuration |
| //some pending config request my exist in case the UniVlanConfig FSM was already started - with internal data - |
| //but execution was set to 'on hold' as first the TechProfile config had to be applied |
| logger.Info(ctx, "Verifying UniVlanConfig Request", log.Fields{"device-id": dh.DeviceID, "UniPort": apUniPort.PortNo, "techprofile-id": aTpID}) |
| dh.lockVlanConfig.RLock() |
| if pVlanFilterFsm, exist := dh.UniVlanConfigFsmMap[apUniPort.UniID]; exist { |
| dh.lockVlanConfig.RUnlock() |
| //VlanFilterFsm exists and was already started (assumed to wait for TechProfile execution here) |
| pVlanFilterStatemachine := pVlanFilterFsm.PAdaptFsm.PFsm |
| if pVlanFilterStatemachine != nil { |
| //if this was an event of the TP processing that was waited for in the VlanFilterFsm |
| if pVlanFilterFsm.GetWaitingTpID(ctx) == aTpID { |
| if pVlanFilterStatemachine.Is(avcfg.VlanStWaitingTechProf) { |
| if err := pVlanFilterStatemachine.Event(avcfg.VlanEvContinueConfig); err != nil { |
| logger.Warnw(ctx, "UniVlanConfigFsm: can't continue processing", log.Fields{"err": err, |
| "device-id": dh.DeviceID, "UniPort": apUniPort.PortNo}) |
| } else { |
| /***** UniVlanConfigFsm continued */ |
| logger.Debugw(ctx, "UniVlanConfigFsm continued", log.Fields{ |
| "state": pVlanFilterStatemachine.Current(), "device-id": dh.DeviceID, |
| "UniPort": apUniPort.PortNo}) |
| } |
| } else if pVlanFilterStatemachine.Is(avcfg.VlanStIncrFlowWaitTP) { |
| if err := pVlanFilterStatemachine.Event(avcfg.VlanEvIncrFlowConfig); err != nil { |
| logger.Warnw(ctx, "UniVlanConfigFsm: can't continue processing", log.Fields{"err": err, |
| "device-id": dh.DeviceID, "UniPort": apUniPort.PortNo}) |
| } else { |
| /***** UniVlanConfigFsm continued */ |
| logger.Debugw(ctx, "UniVlanConfigFsm continued with incremental flow", log.Fields{ |
| "state": pVlanFilterStatemachine.Current(), "device-id": dh.DeviceID, |
| "UniPort": apUniPort.PortNo}) |
| } |
| } else { |
| logger.Debugw(ctx, "no state of UniVlanConfigFsm to be continued", log.Fields{ |
| "have": pVlanFilterStatemachine.Current(), "device-id": dh.DeviceID, |
| "UniPort": apUniPort.PortNo}) |
| } |
| } else { |
| logger.Debugw(ctx, "TechProfile Ready event for TpId that was not waited for in the VlanConfigFsm - continue waiting", log.Fields{ |
| "state": pVlanFilterStatemachine.Current(), "device-id": dh.DeviceID, |
| "UniPort": apUniPort.PortNo, "techprofile-id (done)": aTpID}) |
| } |
| } else { |
| logger.Debugw(ctx, "UniVlanConfigFsm StateMachine does not exist, no flow processing", log.Fields{ |
| "device-id": dh.DeviceID, "UniPort": apUniPort.PortNo}) |
| } |
| } else { |
| dh.lockVlanConfig.RUnlock() |
| } |
| } |
| |
| // RemoveVlanFilterFsm deletes the stored pointer to the VlanConfigFsm |
| // intention is to provide this method to be called from VlanConfigFsm itself, when resources (and methods!) are cleaned up |
| func (dh *deviceHandler) RemoveVlanFilterFsm(ctx context.Context, apUniPort *cmn.OnuUniPort) { |
| logger.Debugw(ctx, "remove UniVlanConfigFsm StateMachine", log.Fields{ |
| "device-id": dh.DeviceID, "uniPort": apUniPort.PortNo}) |
| //save to do, even if entry dows not exist |
| dh.lockVlanConfig.Lock() |
| delete(dh.UniVlanConfigFsmMap, apUniPort.UniID) |
| dh.lockVlanConfig.Unlock() |
| } |
| |
| // startWritingOnuDataToKvStore initiates the KVStore write of ONU persistent data |
| func (dh *deviceHandler) startWritingOnuDataToKvStore(ctx context.Context, aPDevEntry *mib.OnuDeviceEntry) error { |
| dh.mutexKvStoreContext.Lock() //this write routine may (could) be called with the same context, |
| defer dh.mutexKvStoreContext.Unlock() //this write routine may (could) be called with the same context, |
| // obviously then parallel processing on the cancel must be avoided |
| // deadline context to ensure completion of background routines waited for |
| //20200721: 10s proved to be less in 8*8 ONU test on local vbox machine with debug, might be further adapted |
| deadline := time.Now().Add(dh.pOpenOnuAc.maxTimeoutInterAdapterComm) //allowed run time to finish before execution |
| dctx, cancel := context.WithDeadline(context.Background(), deadline) |
| defer cancel() // Ensure cancel is called to release resources |
| |
| err := aPDevEntry.UpdateOnuKvStore(log.WithSpanFromContext(dctx, ctx)) |
| if err != nil { |
| logger.Errorw(ctx, "UpdateOnuKvStore-failed", log.Fields{"device-id": dh.DeviceID}) |
| return err |
| } |
| return nil |
| } |
| |
| // StorePersUniFlowConfig updates local storage of OnuUniFlowConfig and writes it into kv-store afterwards to have it |
| // available for potential reconcilement |
| func (dh *deviceHandler) StorePersUniFlowConfig(ctx context.Context, aUniID uint8, |
| aUniVlanFlowParams *[]cmn.UniVlanFlowParams, aWriteToKvStore bool) error { |
| |
| if dh.IsReconciling() { |
| logger.Info(ctx, "reconciling - don't store persistent UniFlowConfig", log.Fields{"device-id": dh.DeviceID}) |
| return nil |
| } |
| logger.Debugw(ctx, "Store or clear persistent UniFlowConfig", log.Fields{"device-id": dh.DeviceID}) |
| |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice: %s", dh.DeviceID) |
| } |
| pDevEntry.UpdateOnuUniFlowConfig(aUniID, aUniVlanFlowParams) |
| |
| if aWriteToKvStore { |
| return dh.startWritingOnuDataToKvStore(ctx, pDevEntry) |
| } |
| return nil |
| } |
| |
| func (dh *deviceHandler) waitForCompletion(ctx context.Context, cancel context.CancelFunc, wg *sync.WaitGroup, aCallerIdent string) { |
| defer cancel() //ensure termination of context (may be pro forma) |
| wg.Wait() |
| logger.Debugw(ctx, "WaitGroup processing completed", log.Fields{ |
| "device-id": dh.DeviceID, "called from": aCallerIdent}) |
| } |
| |
| // ReasonUpdate set the internally store device reason and if requested in notifyCore updates this state in the core |
| // |
| // (renamed from previous deviceReasonUpdate to avoid confusing with the core function DeviceReasonUpdate) |
| func (dh *deviceHandler) ReasonUpdate(ctx context.Context, deviceReason uint8, notifyCore bool) error { |
| // acquire the deviceReason semaphore throughout this function including the possible update processing in core |
| // in order to avoid reversion of the state sequence within core in case of quasi-parallel calls (eg. in multi UNI processing) |
| dh.mutexDeviceReason.Lock() |
| defer dh.mutexDeviceReason.Unlock() |
| if notifyCore { |
| //TODO with VOL-3045/VOL-3046: return the error and stop further processing at calling position |
| if err := dh.updateDeviceReasonInCore(ctx, &ca.DeviceReason{ |
| DeviceId: dh.DeviceID, |
| Reason: cmn.DeviceReasonMap[deviceReason], |
| }); err != nil { |
| logger.Errorf(ctx, "updating reason in core failed for: %s", |
| log.Fields{"device-id": dh.DeviceID, "error": err}, cmn.DeviceReasonMap[deviceReason]) |
| return err |
| } |
| } else { |
| logger.Debugf(ctx, "update reason in core not requested: %s - device-id: %s", cmn.DeviceReasonMap[deviceReason], dh.DeviceID) |
| } |
| dh.deviceReason = deviceReason |
| logger.Infof(ctx, "reason update done for: %s - device-id: %s - with core update: %v", |
| cmn.DeviceReasonMap[deviceReason], dh.DeviceID, notifyCore) |
| return nil |
| } |
| |
| func (dh *deviceHandler) StorePersistentData(ctx context.Context) error { |
| pDevEntry := dh.GetOnuDeviceEntry(ctx, true) |
| if pDevEntry == nil { |
| logger.Warnw(ctx, "No valid OnuDevice", log.Fields{"device-id": dh.DeviceID}) |
| return fmt.Errorf("no valid OnuDevice: %s", dh.DeviceID) |
| } |
| return dh.startWritingOnuDataToKvStore(ctx, pDevEntry) |
| } |
| |
| // getUniPortMEEntityID takes uniPortNo as the input and returns the Entity ID corresponding to this UNI-G ME Instance |
| // nolint: unused |
| func (dh *deviceHandler) getUniPortMEEntityID(uniPortNo uint32) (uint16, error) { |
| dh.lockDevice.RLock() |
| defer dh.lockDevice.RUnlock() |
| if uniPort, ok := dh.uniEntityMap[uniPortNo]; ok { |
| return uniPort.EntityID, nil |
| } |
| return 0, errors.New("error-fetching-uni-port") |
| } |
| |
| // updatePmConfig updates the pm metrics config. |
| func (dh *deviceHandler) updatePmConfig(ctx context.Context, pmConfigs *voltha.PmConfigs) error { |
| var errorsList []error |
| logger.Infow(ctx, "update-pm-config", log.Fields{"device-id": dh.device.Id, "new-pm-configs": pmConfigs, "old-pm-config": dh.pmConfigs}) |
| |
| errorsList = append(dh.handleGlobalPmConfigUpdates(ctx, pmConfigs), errorsList...) |
| errorsList = append(dh.handleGroupPmConfigUpdates(ctx, pmConfigs), errorsList...) |
| errorsList = append(dh.handleStandalonePmConfigUpdates(ctx, pmConfigs), errorsList...) |
| |
| // Note that if more than one pm config field is updated in a given call, it is possible that partial pm config is handled |
| // successfully. |
| // TODO: Although it is possible to revert to old config in case of partial failure, the code becomes quite complex. Needs more investigation |
| // Is it possible the rw-core reverts to old config on partial failure but adapter retains a partial new config? |
| if len(errorsList) > 0 { |
| logger.Errorw(ctx, "one-or-more-pm-config-failed", log.Fields{"device-id": dh.DeviceID, "pmConfig": dh.pmConfigs}) |
| return fmt.Errorf("errors-handling-one-or-more-pm-config, errors:%v", errorsList) |
| } |
| logger.Infow(ctx, "pm-config-updated", log.Fields{"device-id": dh.DeviceID, "pmConfig": dh.pmConfigs}) |
| return nil |
| } |
| |
| func (dh *deviceHandler) handleGlobalPmConfigUpdates(ctx context.Context, pmConfigs *voltha.PmConfigs) []error { |
| var err error |
| var errorsList []error |
| logger.Infow(ctx, "handling-global-pm-config-params - start", log.Fields{"device-id": dh.device.Id}) |
| |
| if pmConfigs.DefaultFreq != dh.pmConfigs.DefaultFreq { |
| if err = dh.pOnuMetricsMgr.UpdateDefaultFrequency(ctx, pmConfigs); err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| logger.Infow(ctx, "handling-global-pm-config-params - done", log.Fields{"device-id": dh.device.Id}) |
| |
| return errorsList |
| } |
| |
| func (dh *deviceHandler) handleGroupPmConfigUpdates(ctx context.Context, pmConfigs *voltha.PmConfigs) []error { |
| var err error |
| var errorsList []error |
| logger.Debugw(ctx, "handling-group-pm-config-params - start", log.Fields{"device-id": dh.device.Id}) |
| // Check if group metric related config is updated |
| for _, v := range pmConfigs.Groups { |
| dh.pOnuMetricsMgr.OnuMetricsManagerLock.RLock() |
| m, ok := dh.pOnuMetricsMgr.GroupMetricMap[v.GroupName] |
| dh.pOnuMetricsMgr.OnuMetricsManagerLock.RUnlock() |
| |
| if ok && m.Frequency != v.GroupFreq { |
| if err = dh.pOnuMetricsMgr.UpdateGroupFreq(ctx, v.GroupName, pmConfigs); err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| if ok && m.Enabled != v.Enabled { |
| if err = dh.pOnuMetricsMgr.UpdateGroupSupport(ctx, v.GroupName, pmConfigs); err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| } |
| logger.Debugw(ctx, "handling-group-pm-config-params - done", log.Fields{"device-id": dh.device.Id}) |
| return errorsList |
| } |
| |
| func (dh *deviceHandler) handleStandalonePmConfigUpdates(ctx context.Context, pmConfigs *voltha.PmConfigs) []error { |
| var err error |
| var errorsList []error |
| logger.Debugw(ctx, "handling-individual-pm-config-params - start", log.Fields{"device-id": dh.device.Id}) |
| // Check if standalone metric related config is updated |
| for _, v := range pmConfigs.Metrics { |
| dh.pOnuMetricsMgr.OnuMetricsManagerLock.RLock() |
| m, ok := dh.pOnuMetricsMgr.StandaloneMetricMap[v.Name] |
| dh.pOnuMetricsMgr.OnuMetricsManagerLock.RUnlock() |
| |
| if ok && m.Frequency != v.SampleFreq { |
| if err = dh.pOnuMetricsMgr.UpdateMetricFreq(ctx, v.Name, pmConfigs); err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| if ok && m.Enabled != v.Enabled { |
| if err = dh.pOnuMetricsMgr.UpdateMetricSupport(ctx, v.Name, pmConfigs); err != nil { |
| errorsList = append(errorsList, err) |
| } |
| } |
| } |
| logger.Debugw(ctx, "handling-individual-pm-config-params - done", log.Fields{"device-id": dh.device.Id}) |
| return errorsList |
| } |
| |
| // nolint: gocyclo |
| func (dh *deviceHandler) StartCollector(ctx context.Context, waitForOmciProcessor *sync.WaitGroup) { |
| logger.Debugw(ctx, "startingCollector", log.Fields{"device-id": dh.device.Id}) |
| |
| // Start routine to process OMCI GET Responses |
| go dh.pOnuMetricsMgr.ProcessOmciMessages(ctx, waitForOmciProcessor) |
| // Create Extended Frame PM ME |
| go dh.pOnuMetricsMgr.CreateEthernetFrameExtendedPMME(ctx) |
| // Initialize the next metric collection time. |
| // Normally done when the onu_metrics_manager is initialized the first time, but needed again later when ONU is |
| // reset like onu rebooted. |
| dh.pOnuMetricsMgr.InitializeMetricCollectionTime(ctx) |
| dh.setCollectorIsRunning(true) |
| statsCollectionticker := time.NewTicker((pmmgr.FrequencyGranularity) * time.Second) |
| defer statsCollectionticker.Stop() |
| for { |
| |
| select { |
| case <-dh.stopCollector: |
| logger.Debugw(ctx, "stopping-collector-for-onu", log.Fields{"device-id": dh.device.Id}) |
| // Stop the L2 PM FSM |
| go func() { |
| if dh.pOnuMetricsMgr.PAdaptFsm != nil && dh.pOnuMetricsMgr.PAdaptFsm.PFsm != nil { |
| if err := dh.pOnuMetricsMgr.PAdaptFsm.PFsm.Event(pmmgr.L2PmEventStop); err != nil { |
| logger.Errorw(ctx, "error calling event", log.Fields{"device-id": dh.DeviceID, "err": err}) |
| } |
| } else { |
| logger.Errorw(ctx, "metrics manager fsm not initialized", log.Fields{"device-id": dh.DeviceID}) |
| } |
| }() |
| if dh.pOnuMetricsMgr.GetOmciProcessingStatus() { |
| dh.pOnuMetricsMgr.StopProcessingOmciResponses <- true // Stop the OMCI GET response processing routine |
| } |
| if dh.pOnuMetricsMgr.GetTickGenerationStatus() { |
| dh.pOnuMetricsMgr.StopTicks <- true |
| } |
| |
| return |
| case <-statsCollectionticker.C: // Check every FrequencyGranularity to see if it is time for collecting metrics |
| if !dh.pmConfigs.FreqOverride { // If FreqOverride is false, then NextGlobalMetricCollectionTime applies |
| // If the current time is eqaul to or greater than the NextGlobalMetricCollectionTime, collect the group and standalone metrics |
| if time.Now().Equal(dh.pOnuMetricsMgr.NextGlobalMetricCollectionTime) || time.Now().After(dh.pOnuMetricsMgr.NextGlobalMetricCollectionTime) { |
| go dh.pOnuMetricsMgr.CollectAllGroupAndStandaloneMetrics(ctx) |
| // Update the next metric collection time. |
| prevInternal := dh.pOnuMetricsMgr.NextGlobalMetricCollectionTime |
| dh.pOnuMetricsMgr.NextGlobalMetricCollectionTime = prevInternal.Add(time.Duration(dh.pmConfigs.DefaultFreq) * time.Second) |
| } |
| } else { |
| if dh.pmConfigs.Grouped { // metrics are managed as a group |
| // parse through the group and standalone metrics to see it is time to collect their metrics |
| dh.pOnuMetricsMgr.OnuMetricsManagerLock.RLock() // Rlock as we are reading GroupMetricMap and StandaloneMetricMap |
| |
| for n, g := range dh.pOnuMetricsMgr.GroupMetricMap { |
| // If the group is enabled AND (current time is equal to OR after NextCollectionInterval, collect the group metric) |
| // Since the L2 PM counters are collected in a separate FSM, we should avoid those counters in the check. |
| if g.Enabled && !g.IsL2PMCounter && (time.Now().Equal(g.NextCollectionInterval) || time.Now().After(g.NextCollectionInterval)) { |
| go dh.pOnuMetricsMgr.CollectGroupMetric(ctx, n) |
| } |
| } |
| for n, m := range dh.pOnuMetricsMgr.StandaloneMetricMap { |
| // If the standalone is enabled AND (current time is equal to OR after NextCollectionInterval, collect the metric) |
| if m.Enabled && (time.Now().Equal(m.NextCollectionInterval) || time.Now().After(m.NextCollectionInterval)) { |
| go dh.pOnuMetricsMgr.CollectStandaloneMetric(ctx, n) |
| } |
| } |
| dh.pOnuMetricsMgr.OnuMetricsManagerLock.RUnlock() |
| |
| // parse through the group and update the next metric collection time |
| dh.pOnuMetricsMgr.OnuMetricsManagerLock.Lock() // Lock as we are writing the next metric collection time |
| for _, g := range dh.pOnuMetricsMgr.GroupMetricMap { |
| // If group enabled, and the NextCollectionInterval is old (before or equal to current time), update the next collection time stamp |
| // Since the L2 PM counters are collected and managed in a separate FSM, we should avoid those counters in the check. |
| if g.Enabled && !g.IsL2PMCounter && (g.NextCollectionInterval.Before(time.Now()) || g.NextCollectionInterval.Equal(time.Now())) { |
| prevInternal := g.NextCollectionInterval |
| g.NextCollectionInterval = prevInternal.Add(time.Duration(g.Frequency) * time.Second) |
| } |
| } |
| // parse through the standalone metrics and update the next metric collection time |
| for _, m := range dh.pOnuMetricsMgr.StandaloneMetricMap { |
| // If standalone metrics enabled, and the NextCollectionInterval is old (before or equal to current time), update the next collection time stamp |
| if m.Enabled && (m.NextCollectionInterval.Before(time.Now()) || m.NextCollectionInterval.Equal(time.Now())) { |
| prevInternal := m.NextCollectionInterval |
| m.NextCollectionInterval = prevInternal.Add(time.Duration(m.Frequency) * time.Second) |
| } |
| } |
| dh.pOnuMetricsMgr.OnuMetricsManagerLock.Unlock() |
| } /* else { // metrics are not managed as a group |
| // TODO: We currently do not have standalone metrics. When available, add code here to fetch the metrca. |
| } */ |
| } |
| } |
| } |
| } |
| |
| func (dh *deviceHandler) setOnuOffloadStats(ctx context.Context, config *extension.AppOffloadOnuConfig) *extension.SingleSetValueResponse { |
| |
| singleValResp := extension.SingleSetValueResponse{ |
| Response: &extension.SetValueResponse{ |
| Status: extension.SetValueResponse_OK, |
| }, |
| } |
| |
| return &singleValResp |
| } |
| |
| func (dh *deviceHandler) GetUniPortStatus(ctx context.Context, uniInfo *extension.GetOnuUniInfoRequest) *extension.SingleGetValueResponse { |
| |
| portStatus := uniprt.NewUniPortStatus(dh, dh.pOnuOmciDevice.PDevOmciCC) |
| return portStatus.GetUniPortStatus(ctx, uniInfo.UniIndex) |
| } |
| |
| func (dh *deviceHandler) getOnuOMCICounters(ctx context.Context, onuInfo *extension.GetOmciEthernetFrameExtendedPmRequest) *extension.SingleGetValueResponse { |
| if dh.pOnuMetricsMgr == nil { |
| return &extension.SingleGetValueResponse{ |
| Response: &extension.GetValueResponse{ |
| Status: extension.GetValueResponse_ERROR, |
| ErrReason: extension.GetValueResponse_INTERNAL_ERROR, |
| }, |
| } |
| } |
| resp := dh.pOnuMetricsMgr.CollectEthernetFrameExtendedPMCounters(ctx, onuInfo) |
| return resp |
| } |
| |
| func (dh *deviceHandler) getOnuOMCIStats(ctx context.Context) (*extension.SingleGetValueResponse, error) { |
| |
| var err error |
| var pDevOmciCC *cmn.OmciCC |
| if dh.pOnuOmciDevice == nil { |
| logger.Errorw(ctx, "No valid DeviceEntry", log.Fields{"device-id": dh.DeviceID}) |
| err = fmt.Errorf("no-valid-DeviceEntry-%s", dh.DeviceID) |
| } else { |
| pDevOmciCC = dh.pOnuOmciDevice.GetDevOmciCC() |
| if pDevOmciCC == nil { |
| logger.Errorw(ctx, "No valid DeviceOmciCCEntry", log.Fields{"device-id": dh.DeviceID}) |
| err = fmt.Errorf("no-valid-DeviceOmciCCEntry-%s", dh.DeviceID) |
| } |
| } |
| if err != nil { |
| return &extension.SingleGetValueResponse{ |
| Response: &extension.GetValueResponse{ |
| Status: extension.GetValueResponse_ERROR, |
| ErrReason: extension.GetValueResponse_INTERNAL_ERROR, |
| }, |
| }, |
| err |
| } |
| return pDevOmciCC.GetOmciCounters(), nil |
| } |
| |
| func (dh *deviceHandler) isFsmInOmciIdleState(ctx context.Context, PFsm *fsm.FSM, wantedState string) bool { |
| if PFsm == nil { |
| return true //FSM not active - so there is no activity on omci |
| } |
| return PFsm.Current() == wantedState |
| } |
| |
| func (dh *deviceHandler) isFsmInOmciIdleStateDefault(ctx context.Context, omciFsm cmn.UsedOmciConfigFsms, wantedState string) bool { |
| var pAdapterFsm *cmn.AdapterFsm |
| //note/TODO!!: might be that access to all these specific FSM pointers need a semaphore protection as well, cmp lockUpgradeFsm |
| switch omciFsm { |
| case cmn.CUploadFsm: |
| { |
| if dh.pOnuOmciDevice != nil { |
| pAdapterFsm = dh.pOnuOmciDevice.PMibUploadFsm |
| } else { |
| return true //FSM not active - so there is no activity on omci |
| } |
| } |
| case cmn.CDownloadFsm: |
| { |
| if dh.pOnuOmciDevice != nil { |
| pAdapterFsm = dh.pOnuOmciDevice.PMibDownloadFsm |
| } else { |
| return true //FSM not active - so there is no activity on omci |
| } |
| } |
| case cmn.CUniLockFsm: |
| { |
| if dh.pLockStateFsm != nil { |
| pAdapterFsm = dh.pLockStateFsm.PAdaptFsm |
| } else { |
| return true //FSM not active - so there is no activity on omci |
| } |
| } |
| case cmn.CUniUnLockFsm: |
| { |
| if dh.pUnlockStateFsm != nil { |
| pAdapterFsm = dh.pUnlockStateFsm.PAdaptFsm |
| } else { |
| return true //FSM not active - so there is no activity on omci |
| } |
| } |
| case cmn.CL2PmFsm: |
| { |
| if dh.pOnuMetricsMgr != nil { |
| pAdapterFsm = dh.pOnuMetricsMgr.PAdaptFsm |
| } else { |
| return true //FSM not active - so there is no activity on omci |
| } |
| } |
| case cmn.COnuUpgradeFsm: |
| { |
| dh.lockUpgradeFsm.RLock() |
| defer dh.lockUpgradeFsm.RUnlock() |
| if dh.pOnuUpradeFsm != nil { |
| pAdapterFsm = dh.pOnuUpradeFsm.PAdaptFsm |
| } else { |
| return true //FSM not active - so there is no activity on omci |
| } |
| } |
| default: |
| { |
| logger.Errorw(ctx, "invalid stateMachine selected for idle check", log.Fields{ |
| "device-id": dh.DeviceID, "selectedFsm number": omciFsm}) |
| return false //logical error in FSM check, do not not indicate 'idle' - we can't be sure |
| } |
| } |
| if pAdapterFsm != nil && pAdapterFsm.PFsm != nil { |
| return dh.isFsmInOmciIdleState(ctx, pAdapterFsm.PFsm, wantedState) |
| } |
| return true //FSM not active - so there is no activity on omci |
| } |
| |
| func (dh *deviceHandler) isAniConfigFsmInOmciIdleState(ctx context.Context, omciFsm cmn.UsedOmciConfigFsms, idleState string) bool { |
| for _, v := range dh.pOnuTP.PAniConfigFsm { |
| if !dh.isFsmInOmciIdleState(ctx, v.PAdaptFsm.PFsm, idleState) { |
| return false |
| } |
| } |
| return true |
| } |
| |
| func (dh *deviceHandler) isUniVlanConfigFsmInOmciIdleState(ctx context.Context, omciFsm cmn.UsedOmciConfigFsms, idleState string) bool { |
| dh.lockVlanConfig.RLock() |
| defer dh.lockVlanConfig.RUnlock() |
| for _, v := range dh.UniVlanConfigFsmMap { |
| if !dh.isFsmInOmciIdleState(ctx, v.PAdaptFsm.PFsm, idleState) { |
| return false |
| } |
| } |
| return true //FSM not active - so there is no activity on omci |
| } |
| |
| func (dh *deviceHandler) checkUserServiceExists(ctx context.Context) bool { |
| dh.lockVlanConfig.RLock() |
| defer dh.lockVlanConfig.RUnlock() |
| for _, v := range dh.UniVlanConfigFsmMap { |
| if v.PAdaptFsm.PFsm != nil { |
| if v.PAdaptFsm.PFsm.Is(avcfg.CVlanFsmConfiguredState) { |
| return true //there is at least one VLAN FSM with some active configuration |
| } |
| } |
| } |
| return false //there is no VLAN FSM with some active configuration |
| } |
| |
| func (dh *deviceHandler) CheckAuditStartCondition(ctx context.Context, callingFsm cmn.UsedOmciConfigFsms) bool { |
| for fsmName, fsmStruct := range fsmOmciIdleStateFuncMap { |
| if fsmName != callingFsm && !fsmStruct.omciIdleCheckFunc(dh, ctx, fsmName, fsmStruct.omciIdleState) { |
| return false |
| } |
| } |
| // a further check is done to identify, if at least some data traffic related configuration exists |
| // so that a user of this ONU could be 'online' (otherwise it makes no sense to check the MDS [with the intention to keep the user service up]) |
| return dh.checkUserServiceExists(ctx) |
| } |
| |
| func (dh *deviceHandler) PrepareReconcilingWithActiveAdapter(ctx context.Context) { |
| logger.Info(ctx, "prepare to reconcile the ONU with adapter using persistency data", log.Fields{"device-id": dh.device.Id}) |
| if err := dh.resetFsms(ctx, false); err != nil { |
| logger.Errorw(ctx, "reset of FSMs failed!", log.Fields{"device-id": dh.DeviceID, "error": err}) |
| // TODO: fatal error reset ONU, delete deviceHandler! |
| return |
| } |
| dh.uniEntityMap = make(map[uint32]*cmn.OnuUniPort) |
| dh.StartReconciling(ctx, false) |
| } |
| |
| func (dh *deviceHandler) setCollectorIsRunning(flagValue bool) { |
| dh.mutexCollectorFlag.Lock() |
| dh.collectorIsRunning = flagValue |
| dh.mutexCollectorFlag.Unlock() |
| } |
| |
| func (dh *deviceHandler) GetCollectorIsRunning() bool { |
| dh.mutexCollectorFlag.RLock() |
| flagValue := dh.collectorIsRunning |
| dh.mutexCollectorFlag.RUnlock() |
| return flagValue |
| } |
| |
| func (dh *deviceHandler) setAlarmManagerIsRunning(flagValue bool) { |
| dh.mutextAlarmManagerFlag.Lock() |
| dh.alarmManagerIsRunning = flagValue |
| dh.mutextAlarmManagerFlag.Unlock() |
| } |
| |
| func (dh *deviceHandler) GetAlarmManagerIsRunning(ctx context.Context) bool { |
| dh.mutextAlarmManagerFlag.RLock() |
| flagValue := dh.alarmManagerIsRunning |
| logger.Debugw(ctx, "alarm-manager-is-running", log.Fields{"device-id": dh.device.Id, "flag": dh.alarmManagerIsRunning}) |
| dh.mutextAlarmManagerFlag.RUnlock() |
| return flagValue |
| } |
| |
| func (dh *deviceHandler) StartAlarmManager(ctx context.Context) { |
| logger.Debugw(ctx, "startingAlarmManager", log.Fields{"device-id": dh.device.Id}) |
| |
| // Start routine to process OMCI GET Responses |
| go dh.pAlarmMgr.StartOMCIAlarmMessageProcessing(ctx) |
| dh.setAlarmManagerIsRunning(true) |
| if stop := <-dh.stopAlarmManager; stop { |
| logger.Debugw(ctx, "stopping-alarm-manager-for-onu", log.Fields{"device-id": dh.device.Id}) |
| go func() { |
| if dh.pAlarmMgr.AlarmSyncFsm != nil && dh.pAlarmMgr.AlarmSyncFsm.PFsm != nil { |
| _ = dh.pAlarmMgr.AlarmSyncFsm.PFsm.Event(almgr.AsEvStop) |
| } |
| }() |
| dh.pAlarmMgr.StopProcessingOmciMessages <- true // Stop the OMCI routines if any(This will stop the fsms also) |
| dh.pAlarmMgr.StopAlarmAuditTimer <- struct{}{} |
| logger.Debugw(ctx, "sent-all-stop-signals-to-alarm-manager", log.Fields{"device-id": dh.device.Id}) |
| } |
| } |
| |
| func (dh *deviceHandler) setFlowMonitoringIsRunning(uniID uint8, flag bool) { |
| dh.mutexFlowMonitoringRoutineFlag.Lock() |
| defer dh.mutexFlowMonitoringRoutineFlag.Unlock() |
| logger.Debugw(context.Background(), "set-flow-monitoring-routine", log.Fields{"device-id": dh.device.Id, "flag": flag}) |
| dh.isFlowMonitoringRoutineActive[uniID] = flag |
| } |
| |
| func (dh *deviceHandler) GetFlowMonitoringIsRunning(uniID uint8) bool { |
| dh.mutexFlowMonitoringRoutineFlag.RLock() |
| defer dh.mutexFlowMonitoringRoutineFlag.RUnlock() |
| logger.Debugw(context.Background(), "get-flow-monitoring-routine", |
| log.Fields{"device-id": dh.device.Id, "isFlowMonitoringRoutineActive": dh.isFlowMonitoringRoutineActive}) |
| if len(dh.isFlowMonitoringRoutineActive) != 0 { |
| return dh.isFlowMonitoringRoutineActive[uniID] |
| } |
| return false |
| } |
| |
| func (dh *deviceHandler) StartReconciling(ctx context.Context, skipOnuConfig bool) { |
| logger.Info(ctx, "start reconciling", log.Fields{"skipOnuConfig": skipOnuConfig, "device-id": dh.DeviceID}) |
| |
| connectStatus := voltha.ConnectStatus_UNREACHABLE |
| operState := voltha.OperStatus_UNKNOWN |
| |
| if !dh.IsReconciling() { |
| go func() { |
| logger.Debugw(ctx, "wait for channel signal or timeout", |
| log.Fields{"timeout": dh.reconcileExpiryComplete, "device-id": dh.DeviceID}) |
| select { |
| case success := <-dh.chReconcilingFinished: |
| logger.Info(ctx, "reconciling finished signal received", |
| log.Fields{"device-id": dh.DeviceID, "dh.chReconcilingFinished": dh.chReconcilingFinished}) |
| // To guarantee that the case-branch below is completely processed before reconciling processing is continued, |
| // dh.mutexReconcilingFlag is locked already here. Thereby it is ensured, that further reconciling processing is stopped |
| // at next call of dh.IsReconciling() until dh.reconciling is set after informing core about finished reconciling below. |
| // This change addresses a problem described in VOL-4533 where the flag dh.reconciling not yet reset causes the uni ports |
| // not to be created in ONOS in function dh.addUniPort(), when reconciling was started in reason "starting-openomci". |
| // TODO: Keeping the mutex beyond an RPC towards core seems justifiable, as the effects here are easily overseeable. |
| // However, a later refactoring of the functionality remains unaffected. |
| dh.mutexReconcilingFlag.Lock() |
| if success { |
| if onuDevEntry := dh.GetOnuDeviceEntry(ctx, true); onuDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice - aborting Core DeviceStateUpdate", |
| log.Fields{"device-id": dh.DeviceID}) |
| } else { |
| onuDevEntry.MutexPersOnuConfig.RLock() |
| if onuDevEntry.SOnuPersistentData.PersOperState == "up" { |
| connectStatus = voltha.ConnectStatus_REACHABLE |
| if !onuDevEntry.SOnuPersistentData.PersUniDisableDone { |
| if onuDevEntry.SOnuPersistentData.PersUniUnlockDone { |
| operState = voltha.OperStatus_ACTIVE |
| } else { |
| operState = voltha.OperStatus_ACTIVATING |
| } |
| } |
| } else if onuDevEntry.SOnuPersistentData.PersOperState == "down" || |
| onuDevEntry.SOnuPersistentData.PersOperState == "unknown" || |
| onuDevEntry.SOnuPersistentData.PersOperState == "" { |
| operState = voltha.OperStatus_DISCOVERED |
| } |
| onuDevEntry.MutexPersOnuConfig.RUnlock() |
| logger.Debugw(ctx, "Core DeviceStateUpdate", |
| log.Fields{"device-id": dh.device.Id, "connectStatus": connectStatus, "operState": operState}) |
| } |
| logger.Info(ctx, "reconciling has been finished in time", |
| log.Fields{"device-id": dh.DeviceID}) |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: connectStatus, |
| OperStatus: operState, |
| }); err != nil { |
| logger.Errorw(ctx, "unable to update device state to core", |
| log.Fields{"device-id": dh.DeviceID, "Err": err}) |
| } |
| } else { |
| logger.Errorw(ctx, "wait for reconciling aborted", |
| log.Fields{"device-id": dh.DeviceID}) |
| |
| if onuDevEntry := dh.GetOnuDeviceEntry(ctx, true); onuDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice", |
| log.Fields{"device-id": dh.DeviceID}) |
| } else { |
| onuDevEntry.MutexPersOnuConfig.RLock() |
| if onuDevEntry.SOnuPersistentData.PersOperState == "up" { |
| connectStatus = voltha.ConnectStatus_REACHABLE |
| } |
| onuDevEntry.MutexPersOnuConfig.RUnlock() |
| } |
| dh.deviceReconcileFailedUpdate(ctx, cmn.DrReconcileCanceled, connectStatus) |
| } |
| case <-time.After(dh.reconcileExpiryComplete): |
| logger.Errorw(ctx, "timeout waiting for reconciling to be finished!", |
| log.Fields{"device-id": dh.DeviceID}) |
| dh.mutexReconcilingFlag.Lock() |
| |
| if onuDevEntry := dh.GetOnuDeviceEntry(ctx, true); onuDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice", |
| log.Fields{"device-id": dh.DeviceID}) |
| } else { |
| onuDevEntry.MutexPersOnuConfig.RLock() |
| if onuDevEntry.SOnuPersistentData.PersOperState == "up" { |
| connectStatus = voltha.ConnectStatus_REACHABLE |
| } |
| onuDevEntry.MutexPersOnuConfig.RUnlock() |
| } |
| |
| dh.deviceReconcileFailedUpdate(ctx, cmn.DrReconcileMaxTimeout, connectStatus) |
| |
| } |
| dh.reconciling = cNoReconciling |
| dh.mutexReconcilingFlag.Unlock() |
| dh.SetReconcilingReasonUpdate(false) |
| dh.SetReconcilingFirstPass(true) |
| |
| if onuDevEntry := dh.GetOnuDeviceEntry(ctx, true); onuDevEntry == nil { |
| logger.Errorw(ctx, "No valid OnuDevice", log.Fields{"device-id": dh.DeviceID}) |
| } else { |
| onuDevEntry.MutexReconciledTpInstances.Lock() |
| onuDevEntry.ReconciledTpInstances = make(map[uint8]map[uint8]inter_adapter.TechProfileDownloadMessage) |
| onuDevEntry.MutexReconciledTpInstances.Unlock() |
| } |
| }() |
| } |
| dh.mutexReconcilingFlag.Lock() |
| if skipOnuConfig || dh.GetSkipOnuConfigEnabled() { |
| dh.reconciling = cSkipOnuConfigReconciling |
| } else { |
| dh.reconciling = cOnuConfigReconciling |
| } |
| dh.mutexReconcilingFlag.Unlock() |
| } |
| |
| func (dh *deviceHandler) stopReconciling(ctx context.Context, success bool, reconcileFlowResult uint16) { |
| logger.Warn(ctx, "stop reconciling", log.Fields{"device-id": dh.DeviceID, "success": success}) |
| if dh.IsReconciling() { |
| dh.sendChReconcileFinished(success) |
| if reconcileFlowResult != cWaitReconcileFlowNoActivity { |
| dh.SendChUniVlanConfigFinished(reconcileFlowResult) |
| } |
| } else { |
| logger.Debugw(ctx, "nothing to stop - reconciling is not running", log.Fields{"device-id": dh.DeviceID}) |
| } |
| } |
| |
| func (dh *deviceHandler) IsReconciling() bool { |
| dh.mutexReconcilingFlag.RLock() |
| defer dh.mutexReconcilingFlag.RUnlock() |
| return dh.reconciling != cNoReconciling |
| } |
| |
| func (dh *deviceHandler) IsSkipOnuConfigReconciling() bool { |
| dh.mutexReconcilingFlag.RLock() |
| defer dh.mutexReconcilingFlag.RUnlock() |
| return dh.reconciling == cSkipOnuConfigReconciling |
| } |
| |
| func (dh *deviceHandler) SetReconcilingFirstPass(value bool) { |
| dh.mutexReconcilingFirstPassFlag.Lock() |
| dh.reconcilingFirstPass = value |
| dh.mutexReconcilingFirstPassFlag.Unlock() |
| } |
| |
| func (dh *deviceHandler) SetReconcilingReasonUpdate(value bool) { |
| dh.mutexReconcilingReasonUpdate.Lock() |
| dh.reconcilingReasonUpdate = value |
| dh.mutexReconcilingReasonUpdate.Unlock() |
| } |
| |
| func (dh *deviceHandler) IsReconcilingReasonUpdate() bool { |
| dh.mutexReconcilingReasonUpdate.RLock() |
| defer dh.mutexReconcilingReasonUpdate.RUnlock() |
| return dh.reconcilingReasonUpdate |
| } |
| |
| func (dh *deviceHandler) getDeviceReason() uint8 { |
| dh.mutexDeviceReason.RLock() |
| value := dh.deviceReason |
| dh.mutexDeviceReason.RUnlock() |
| return value |
| } |
| |
| func (dh *deviceHandler) GetDeviceReasonString() string { |
| return cmn.DeviceReasonMap[dh.getDeviceReason()] |
| } |
| |
| func (dh *deviceHandler) SetReadyForOmciConfig(flagValue bool) { |
| dh.mutexReadyForOmciConfig.Lock() |
| dh.readyForOmciConfig = flagValue |
| dh.mutexReadyForOmciConfig.Unlock() |
| } |
| func (dh *deviceHandler) IsReadyForOmciConfig() bool { |
| dh.mutexReadyForOmciConfig.RLock() |
| flagValue := dh.readyForOmciConfig |
| dh.mutexReadyForOmciConfig.RUnlock() |
| return flagValue |
| } |
| |
| func (dh *deviceHandler) deviceReconcileFailedUpdate(ctx context.Context, deviceReason uint8, connectStatus voltha.ConnectStatus_Types) { |
| if err := dh.ReasonUpdate(ctx, deviceReason, true); err != nil { |
| logger.Errorw(ctx, "unable to update device reason to core", |
| log.Fields{"device-id": dh.DeviceID, "Err": err}) |
| } |
| |
| logger.Debugw(ctx, "Core DeviceStateUpdate", |
| log.Fields{"device-id": dh.device.Id, "connectStatus": connectStatus, "operState": voltha.OperStatus_RECONCILING_FAILED}) |
| if err := dh.updateDeviceStateInCore(ctx, &ca.DeviceStateFilter{ |
| DeviceId: dh.DeviceID, |
| ConnStatus: connectStatus, |
| OperStatus: voltha.OperStatus_RECONCILING_FAILED, |
| }); err != nil { |
| logger.Errorw(ctx, "unable to update device state to core", |
| log.Fields{"device-id": dh.DeviceID, "Err": err}) |
| } |
| } |
| |
| /* |
| Helper functions to communicate with Core |
| */ |
| |
| func (dh *deviceHandler) getDeviceFromCore(ctx context.Context, deviceID string) (*voltha.Device, error) { |
| cClient, err := dh.coreClient.GetCoreServiceClient() |
| if err != nil || cClient == nil { |
| return nil, err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.RPCTimeout) |
| defer cancel() |
| logger.Debugw(subCtx, "get-device-from-core", log.Fields{"device-id": deviceID}) |
| return cClient.GetDevice(subCtx, &vc.ID{Id: deviceID}) |
| } |
| |
| func (dh *deviceHandler) updateDeviceStateInCore(ctx context.Context, deviceStateFilter *ca.DeviceStateFilter) error { |
| cClient, err := dh.coreClient.GetCoreServiceClient() |
| if err != nil || cClient == nil { |
| return err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.RPCTimeout) |
| defer cancel() |
| _, err = cClient.DeviceStateUpdate(subCtx, deviceStateFilter) |
| logger.Debugw(subCtx, "device-updated-in-core", |
| log.Fields{"device-id": dh.device.Id, "device-state": deviceStateFilter, "error": err}) |
| return err |
| } |
| |
| func (dh *deviceHandler) updatePMConfigInCore(ctx context.Context, pmConfigs *voltha.PmConfigs) error { |
| cClient, err := dh.coreClient.GetCoreServiceClient() |
| if err != nil || cClient == nil { |
| return err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.RPCTimeout) |
| defer cancel() |
| _, err = cClient.DevicePMConfigUpdate(subCtx, pmConfigs) |
| logger.Debugw(subCtx, "pmconfig-updated-in-core", |
| log.Fields{"device-id": dh.device.Id, "pm-configs": pmConfigs, "error": err}) |
| return err |
| } |
| |
| func (dh *deviceHandler) updateDeviceInCore(ctx context.Context, device *voltha.Device) error { |
| cClient, err := dh.coreClient.GetCoreServiceClient() |
| if err != nil || cClient == nil { |
| return err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.RPCTimeout) |
| defer cancel() |
| _, err = cClient.DeviceUpdate(subCtx, device) |
| logger.Debugw(subCtx, "device-updated-in-core", log.Fields{"device-id": device.Id, "error": err}) |
| return err |
| } |
| |
| func (dh *deviceHandler) CreatePortInCore(ctx context.Context, port *voltha.Port) error { |
| cClient, err := dh.coreClient.GetCoreServiceClient() |
| if err != nil || cClient == nil { |
| return err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.RPCTimeout) |
| defer cancel() |
| _, err = cClient.PortCreated(subCtx, port) |
| logger.Debugw(subCtx, "port-created-in-core", log.Fields{"port": port, "error": err}) |
| return err |
| } |
| |
| func (dh *deviceHandler) updatePortStateInCore(ctx context.Context, portState *ca.PortState) error { |
| cClient, err := dh.coreClient.GetCoreServiceClient() |
| if err != nil || cClient == nil { |
| return err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.RPCTimeout) |
| defer cancel() |
| _, err = cClient.PortStateUpdate(subCtx, portState) |
| logger.Debugw(subCtx, "port-state-updated-in-core", log.Fields{"device-id": dh.device.Id, "port-state": portState, "error": err}) |
| return err |
| } |
| |
| func (dh *deviceHandler) updateDeviceReasonInCore(ctx context.Context, reason *ca.DeviceReason) error { |
| cClient, err := dh.coreClient.GetCoreServiceClient() |
| if err != nil || cClient == nil { |
| return err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.RPCTimeout) |
| defer cancel() |
| _, err = cClient.DeviceReasonUpdate(subCtx, reason) |
| logger.Debugw(subCtx, "device-reason-updated-in-core", log.Fields{"device-id": dh.device.Id, "reason": reason, "error": err}) |
| return err |
| } |
| |
| /* |
| Helper functions to communicate with parent adapter |
| */ |
| |
| func (dh *deviceHandler) GetTechProfileInstanceFromParentAdapter(ctx context.Context, aUniID uint8, |
| aTpPath string) (*ia.TechProfileDownloadMessage, error) { |
| |
| var request = ia.TechProfileInstanceRequestMessage{ |
| DeviceId: dh.DeviceID, |
| TpInstancePath: aTpPath, |
| ParentDeviceId: dh.parentID, |
| ParentPonPort: dh.device.ParentPortNo, |
| OnuId: dh.device.ProxyAddress.OnuId, |
| UniId: uint32(aUniID), |
| } |
| |
| pgClient, err := dh.pOpenOnuAc.getParentAdapterServiceClient(dh.device.ProxyAddress.AdapterEndpoint) |
| if err != nil || pgClient == nil { |
| return nil, err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.MaxTimeoutInterAdapterComm) |
| defer cancel() |
| logger.Debugw(subCtx, "get-tech-profile-instance", |
| log.Fields{"device-id": dh.device.Id, "request": request, "parent-endpoint": dh.device.ProxyAddress.AdapterEndpoint}) |
| return pgClient.GetTechProfileInstance(subCtx, &request) |
| } |
| |
| // This routine is unique per ONU ID and blocks on flowControlBlock channel for incoming flows |
| // Each incoming flow is processed in a synchronous manner, i.e., the flow is processed to completion before picking another |
| func (dh *deviceHandler) PerOnuFlowHandlerRoutine(uniID uint8) { |
| logger.Infow(context.Background(), "starting-flow-handler-routine", log.Fields{"device-id": dh.DeviceID}) |
| dh.setFlowMonitoringIsRunning(uniID, true) |
| for { |
| select { |
| // block on the channel to receive an incoming flow |
| // process the flow completely before proceeding to handle the next flow |
| case flowCb := <-dh.flowCbChan[uniID]: |
| startTime := time.Now() |
| logger.Info(flowCb.ctx, "serial-flow-processor--start", log.Fields{"device-id": dh.DeviceID}) |
| respChan := make(chan error) |
| if flowCb.addFlow { |
| go dh.addFlowItemToUniPort(flowCb.ctx, flowCb.flowItem, flowCb.uniPort, flowCb.flowMetaData, &respChan) |
| } else { |
| go dh.removeFlowItemFromUniPort(flowCb.ctx, flowCb.flowItem, flowCb.uniPort, &respChan) |
| } |
| // Block on response and tunnel it back to the caller |
| *flowCb.respChan <- <-respChan |
| logger.Info(flowCb.ctx, "serial-flow-processor--end", |
| log.Fields{"device-id": dh.DeviceID, "absoluteTimeForFlowProcessingInSecs": time.Since(startTime).Seconds()}) |
| case <-dh.stopFlowMonitoringRoutine[uniID]: |
| logger.Infow(context.Background(), "stopping-flow-handler-routine", log.Fields{"device-id": dh.DeviceID}) |
| dh.setFlowMonitoringIsRunning(uniID, false) |
| return |
| } |
| } |
| } |
| |
| func (dh *deviceHandler) SendOnuSwSectionsOfWindow(ctx context.Context, parentEndpoint string, request *ia.OmciMessages) error { |
| request.ParentDeviceId = dh.GetProxyAddressID() |
| request.ChildDeviceId = dh.DeviceID |
| request.ProxyAddress = dh.GetProxyAddress() |
| request.ConnectStatus = common.ConnectStatus_REACHABLE |
| |
| pgClient, err := dh.pOpenOnuAc.getParentAdapterServiceClient(parentEndpoint) |
| if err != nil || pgClient == nil { |
| return err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.MaxTimeoutInterAdapterComm) |
| defer cancel() |
| logger.Debugw(subCtx, "send-omci-request", log.Fields{"request": request, "parent-endpoint": parentEndpoint}) |
| _, err = pgClient.ProxyOmciRequests(subCtx, request) |
| if err != nil { |
| logger.Errorw(ctx, "omci-failure", log.Fields{"device-id": dh.device.Id, "request": request, "error": err, |
| "request-parent": request.ParentDeviceId, "request-child": request.ChildDeviceId, "request-proxy": request.ProxyAddress}) |
| } |
| return err |
| } |
| |
| func (dh *deviceHandler) SendOMCIRequest(ctx context.Context, parentEndpoint string, request *ia.OmciMessage) error { |
| pgClient, err := dh.pOpenOnuAc.getParentAdapterServiceClient(parentEndpoint) |
| if err != nil || pgClient == nil { |
| return err |
| } |
| subCtx, cancel := context.WithTimeout(log.WithSpanFromContext(context.Background(), ctx), dh.config.MaxTimeoutInterAdapterComm) |
| defer cancel() |
| dh.setOltAvailable(true) |
| logger.Debugw(subCtx, "send-omci-request", log.Fields{"device-id": dh.device.Id, "request": request, "parent-endpoint": parentEndpoint}) |
| _, err = pgClient.ProxyOmciRequest(subCtx, request) |
| if err != nil { |
| if status.Code(err) == codes.Unavailable { |
| dh.setOltAvailable(false) |
| } |
| logger.Errorw(ctx, "omci-failure", |
| log.Fields{"device-id": dh.device.Id, "request": request, "error": err, "request-parent": request.ParentDeviceId, |
| "request-child": request.ChildDeviceId, "request-proxy": request.ProxyAddress, "oltAvailable": dh.IsOltAvailable}) |
| } |
| return err |
| } |
| |
| func (dh *deviceHandler) CheckAvailableOnuCapabilities(ctx context.Context, pDevEntry *mib.OnuDeviceEntry, tpInst tech_profile.TechProfileInstance) error { |
| // Check if there are additional TCONT instances necessary/available |
| pDevEntry.MutexPersOnuConfig.Lock() |
| if _, ok := pDevEntry.SOnuPersistentData.PersTcontMap[uint16(tpInst.UsScheduler.AllocId)]; !ok { |
| numberOfTcontMapEntries := len(pDevEntry.SOnuPersistentData.PersTcontMap) |
| pDevEntry.MutexPersOnuConfig.Unlock() |
| numberOfTcontDbInsts := pDevEntry.GetOnuDB().GetNumberOfInst(me.TContClassID) |
| logger.Debugw(ctx, "checking available TCONT instances", |
| log.Fields{"device-id": dh.DeviceID, "numberOfTcontMapEntries": numberOfTcontMapEntries, "numberOfTcontDbInsts": numberOfTcontDbInsts}) |
| if numberOfTcontMapEntries >= numberOfTcontDbInsts { |
| logger.Errorw(ctx, "configuration exceeds ONU capabilities - running out of TCONT instances: send ONU device event!", |
| log.Fields{"device-id": dh.device.Id}) |
| pDevEntry.SendOnuDeviceEvent(ctx, cmn.OnuConfigFailureMissingTcont, cmn.OnuConfigFailureMissingTcontDesc) |
| return fmt.Errorf(fmt.Sprintf("configuration exceeds ONU capabilities - running out of TCONT instances: device-id: %s", dh.DeviceID)) |
| } |
| } else { |
| pDevEntry.MutexPersOnuConfig.Unlock() |
| } |
| // Check if there are enough PrioQueue instances available |
| if dh.pOnuTP != nil { |
| var numberOfUsPrioQueueDbInsts int |
| |
| queueInstKeys := pDevEntry.GetOnuDB().GetSortedInstKeys(ctx, me.PriorityQueueClassID) |
| for _, mgmtEntityID := range queueInstKeys { |
| if mgmtEntityID >= 0x8000 && mgmtEntityID <= 0xFFFF { |
| numberOfUsPrioQueueDbInsts++ |
| } |
| } |
| // Check if there is an upstream PriorityQueue instance available for each Gem port |
| numberOfConfiguredGemPorts := dh.pOnuTP.GetNumberOfConfiguredUsGemPorts(ctx) |
| logger.Debugw(ctx, "checking available upstream PriorityQueue instances", |
| log.Fields{"device-id": dh.DeviceID, |
| "numberOfConfiguredGemPorts": numberOfConfiguredGemPorts, |
| "tpInst.NumGemPorts": tpInst.NumGemPorts, |
| "numberOfUsPrioQueueDbInsts": numberOfUsPrioQueueDbInsts}) |
| |
| if numberOfConfiguredGemPorts+int(tpInst.NumGemPorts) > numberOfUsPrioQueueDbInsts { |
| logger.Errorw(ctx, "configuration exceeds ONU capabilities - running out of upstream PrioQueue instances: send ONU device event!", |
| log.Fields{"device-id": dh.device.Id}) |
| pDevEntry.SendOnuDeviceEvent(ctx, cmn.OnuConfigFailureMissingUsPriorityQueue, cmn.OnuConfigFailureMissingUsPriorityQueueDesc) |
| return fmt.Errorf(fmt.Sprintf("configuration exceeds ONU capabilities - running out of upstream PrioQueue instances: device-id: %s", dh.DeviceID)) |
| } |
| // Downstream PrioQueue instances are evaluated in accordance with ONU MIB upload data in function UniPonAniConfigFsm::prepareAndEnterConfigState(). |
| // In case of missing downstream PrioQueues the attribute "Priority queue pointer for downstream" of ME "GEM port network CTP" will be set to "0", |
| // which then alternatively activates the queuing mechanisms of the ONU (refer to Rec. ITU-T G.988 chapter 9.2.3). |
| } else { |
| logger.Warnw(ctx, "onuTechProf instance not set up - check for PriorityQueue instances skipped!", |
| log.Fields{"device-id": dh.DeviceID}) |
| } |
| return nil |
| } |
| |
| // GetDeviceID - TODO: add comment |
| func (dh *deviceHandler) GetDeviceID() string { |
| return dh.DeviceID |
| } |
| |
| // GetProxyAddressID - TODO: add comment |
| func (dh *deviceHandler) GetProxyAddressID() string { |
| return dh.device.ProxyAddress.GetDeviceId() |
| } |
| |
| // GetProxyAddressType - TODO: add comment |
| func (dh *deviceHandler) GetProxyAddressType() string { |
| return dh.device.ProxyAddress.GetDeviceType() |
| } |
| |
| // GetProxyAddress - TODO: add comment |
| func (dh *deviceHandler) GetProxyAddress() *voltha.Device_ProxyAddress { |
| return dh.device.ProxyAddress |
| } |
| |
| // GetEventProxy - TODO: add comment |
| func (dh *deviceHandler) GetEventProxy() eventif.EventProxy { |
| return dh.EventProxy |
| } |
| |
| // GetOmciTimeout - TODO: add comment |
| func (dh *deviceHandler) GetOmciTimeout() int { |
| return dh.pOpenOnuAc.omciTimeout |
| } |
| |
| // GetAlarmAuditInterval - TODO: add comment |
| func (dh *deviceHandler) GetAlarmAuditInterval() time.Duration { |
| return dh.pOpenOnuAc.alarmAuditInterval |
| } |
| |
| // GetDlToOnuTimeout4M - TODO: add comment |
| func (dh *deviceHandler) GetDlToOnuTimeout4M() time.Duration { |
| return dh.pOpenOnuAc.dlToOnuTimeout4M |
| } |
| |
| // GetUniEntityMap - TODO: add comment |
| func (dh *deviceHandler) GetUniEntityMap() *cmn.OnuUniPortMap { |
| return &dh.uniEntityMap |
| } |
| |
| // GetPonPortNumber - TODO: add comment |
| func (dh *deviceHandler) GetPonPortNumber() *uint32 { |
| return &dh.ponPortNumber |
| } |
| |
| // GetUniVlanConfigFsm - TODO: add comment |
| func (dh *deviceHandler) GetUniVlanConfigFsm(uniID uint8) cmn.IuniVlanConfigFsm { |
| dh.lockVlanConfig.RLock() |
| value := dh.UniVlanConfigFsmMap[uniID] |
| dh.lockVlanConfig.RUnlock() |
| return value |
| } |
| |
| // GetOnuAlarmManager - TODO: add comment |
| func (dh *deviceHandler) GetOnuAlarmManager() cmn.IonuAlarmManager { |
| return dh.pAlarmMgr |
| } |
| |
| // GetOnuMetricsManager - TODO: add comment |
| func (dh *deviceHandler) GetOnuMetricsManager() cmn.IonuMetricsManager { |
| return dh.pOnuMetricsMgr |
| } |
| |
| // GetOnuTP - TODO: add comment |
| func (dh *deviceHandler) GetOnuTP() cmn.IonuUniTechProf { |
| return dh.pOnuTP |
| } |
| |
| // GetBackendPathPrefix - TODO: add comment |
| func (dh *deviceHandler) GetBackendPathPrefix() string { |
| return dh.pOpenOnuAc.cm.Backend.PathPrefix |
| } |
| |
| // GetOnuIndication - TODO: add comment |
| func (dh *deviceHandler) GetOnuIndication() *openolt.OnuIndication { |
| return dh.pOnuIndication |
| } |
| |
| // RLockMutexDeletionInProgressFlag - TODO: add comment |
| func (dh *deviceHandler) RLockMutexDeletionInProgressFlag() { |
| dh.mutexDeletionInProgressFlag.RLock() |
| } |
| |
| // RUnlockMutexDeletionInProgressFlag - TODO: add comment |
| func (dh *deviceHandler) RUnlockMutexDeletionInProgressFlag() { |
| dh.mutexDeletionInProgressFlag.RUnlock() |
| } |
| |
| // GetDeletionInProgress - TODO: add comment |
| func (dh *deviceHandler) GetDeletionInProgress() bool { |
| return dh.deletionInProgress |
| } |
| |
| // GetPmConfigs - TODO: add comment |
| func (dh *deviceHandler) GetPmConfigs() *voltha.PmConfigs { |
| return dh.pmConfigs |
| } |
| |
| // GetDeviceType - TODO: add comment |
| func (dh *deviceHandler) GetDeviceType() string { |
| return dh.DeviceType |
| } |
| |
| // GetLogicalDeviceID - TODO: add comment |
| func (dh *deviceHandler) GetLogicalDeviceID() string { |
| return dh.logicalDeviceID |
| } |
| |
| // GetDevice - TODO: add comment |
| func (dh *deviceHandler) GetDevice() *voltha.Device { |
| return dh.device |
| } |
| |
| func (dh *deviceHandler) setOltAvailable(value bool) { |
| dh.mutexOltAvailable.Lock() |
| dh.oltAvailable = value |
| dh.mutexOltAvailable.Unlock() |
| } |
| |
| // IsOltAvailable - TODO: add comment |
| func (dh *deviceHandler) IsOltAvailable() bool { |
| dh.mutexOltAvailable.RLock() |
| defer dh.mutexOltAvailable.RUnlock() |
| return dh.oltAvailable |
| } |
| |
| // GetMetricsEnabled - TODO: add comment |
| func (dh *deviceHandler) GetMetricsEnabled() bool { |
| return dh.pOpenOnuAc.MetricsEnabled |
| } |
| |
| // GetExtendedOmciSupportEnabled - TODO: add comment |
| func (dh *deviceHandler) GetExtendedOmciSupportEnabled() bool { |
| return dh.pOpenOnuAc.ExtendedOmciSupportEnabled |
| } |
| |
| // GetExtendedOmciSupportEnabled - TODO: add comment |
| func (dh *deviceHandler) GetSkipOnuConfigEnabled() bool { |
| return dh.pOpenOnuAc.skipOnuConfig |
| } |
| |
| // InitPmConfigs - TODO: add comment |
| func (dh *deviceHandler) InitPmConfigs() { |
| dh.pmConfigs = &voltha.PmConfigs{} |
| } |
| |
| // GetUniPortMask - TODO: add comment |
| func (dh *deviceHandler) GetUniPortMask() int { |
| return dh.pOpenOnuAc.config.UniPortMask |
| } |
| |
| func (dh *deviceHandler) anyTpPathExists(aTpPathMap map[uint8]string) bool { |
| tpPathFound := false |
| for _, tpPath := range aTpPathMap { |
| if tpPath != "" { |
| tpPathFound = true |
| } |
| } |
| return tpPathFound |
| } |
| |
| func (dh *deviceHandler) getOnuActiveAlarms(ctx context.Context) *extension.SingleGetValueResponse { |
| resp := dh.GetOnuAlarmManager().GetOnuActiveAlarms(ctx) |
| logger.Debugw(ctx, "Received response from AlarmManager for Active Alarms for DeviceEntry", log.Fields{"device-id": dh.DeviceID}) |
| return resp |
| } |
| |
| func (dh *deviceHandler) GetDeviceDeleteCommChan(ctx context.Context) chan bool { |
| return dh.deviceDeleteCommChan |
| } |
| |
| // PrepareForGarbageCollection - remove references to prepare for garbage collection |
| func (dh *deviceHandler) PrepareForGarbageCollection(ctx context.Context, aDeviceID string) { |
| logger.Debugw(ctx, "prepare for garbage collection", log.Fields{"device-id": aDeviceID}) |
| |
| // Note: This function must be called as a goroutine to prevent blocking of further processing! |
| // first let the objects rest for some time to give all asynchronously started |
| // cleanup routines a chance to come to an end |
| time.Sleep(2 * time.Second) |
| |
| if dh.pOnuOmciDevice != nil { |
| if dh.pOnuOmciDevice.PDevOmciCC != nil { |
| // Since we cannot rule out that one of the handlers had initiated any OMCI configurations during its |
| // reset handling (even in future coding), request monitoring is canceled here one last time to |
| // be sure that all corresponding go routines are terminated |
| dh.pOnuOmciDevice.PDevOmciCC.CancelRequestMonitoring(ctx) |
| } |
| } |
| time.Sleep(3 * time.Second) |
| |
| if dh.pOnuTP != nil { |
| dh.pOnuTP.PrepareForGarbageCollection(ctx, aDeviceID) |
| } |
| if dh.pOnuMetricsMgr != nil { |
| logger.Debugw(ctx, "preparation of garbage collection is done under control of pm fsm - wait for completion", |
| log.Fields{"device-id": aDeviceID}) |
| select { |
| case <-dh.pOnuMetricsMgr.GarbageCollectionComplete: |
| logger.Debugw(ctx, "pm fsm shut down and garbage collection complete", log.Fields{"deviceID": aDeviceID}) |
| case <-time.After(pmmgr.MaxTimeForPmFsmShutDown * time.Second): |
| logger.Errorw(ctx, "fsm did not shut down in time", log.Fields{"deviceID": aDeviceID}) |
| default: |
| } |
| } |
| if dh.pAlarmMgr != nil { |
| dh.pAlarmMgr.PrepareForGarbageCollection(ctx, aDeviceID) |
| } |
| if dh.pSelfTestHdlr != nil { |
| dh.pSelfTestHdlr.PrepareForGarbageCollection(ctx, aDeviceID) |
| } |
| if dh.pLockStateFsm != nil { |
| dh.pLockStateFsm.PrepareForGarbageCollection(ctx, aDeviceID) |
| } |
| if dh.pUnlockStateFsm != nil { |
| dh.pUnlockStateFsm.PrepareForGarbageCollection(ctx, aDeviceID) |
| } |
| if dh.pOnuUpradeFsm != nil { |
| dh.pOnuUpradeFsm.PrepareForGarbageCollection(ctx, aDeviceID) |
| } |
| if dh.pOnuOmciDevice != nil { |
| dh.pOnuOmciDevice.PrepareForGarbageCollection(ctx, aDeviceID) |
| } |
| for k, v := range dh.UniVlanConfigFsmMap { |
| v.PrepareForGarbageCollection(ctx, aDeviceID) |
| delete(dh.UniVlanConfigFsmMap, k) |
| } |
| dh.pOnuIndication = nil |
| dh.pOnuOmciDevice = nil |
| dh.pOnuTP = nil |
| dh.pOnuMetricsMgr = nil |
| dh.pAlarmMgr = nil |
| dh.pSelfTestHdlr = nil |
| dh.pLockStateFsm = nil |
| dh.pUnlockStateFsm = nil |
| dh.pOnuUpradeFsm = nil |
| } |