| /* |
| * Copyright 2020-2024 Open Networking Foundation (ONF) and the ONF Contributors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // Package swupg provides the utilities for onu sw upgrade |
| package swupg |
| |
| import ( |
| "context" |
| "encoding/binary" |
| "fmt" |
| "strconv" |
| "sync" |
| "time" |
| |
| "github.com/boguslaw-wojcik/crc32a" |
| "github.com/looplab/fsm" |
| "github.com/opencord/omci-lib-go/v2" |
| me "github.com/opencord/omci-lib-go/v2/generated" |
| "github.com/opencord/voltha-lib-go/v7/pkg/log" |
| cmn "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/common" |
| "github.com/opencord/voltha-openonu-adapter-go/internal/pkg/devdb" |
| ia "github.com/opencord/voltha-protos/v5/go/inter_adapter" |
| "github.com/opencord/voltha-protos/v5/go/voltha" |
| ) |
| |
| const cMaxUint32 = ^uint32(0) |
| |
| const ( |
| // internal predefined values - some off them should later be configurable (perhaps with theses as defaults) |
| cOmciDownloadSectionSizeBaseLine = 31 //in bytes |
| cOmciDownloadWindowSizeLimitBaseLine = 31 //in sections for window offset (windowSize(32)-1) |
| cOmciDownloadSectionSizeExtLine = 1965 //in bytes |
| cOmciDownloadWindowSizeLimitExtLine = 7 //in sections for window offset (windowSize(8)-1) |
| //cOmciDownloadWindowRetryMax = 2 // max attempts for a specific window |
| cOmciSectionInterleaveMilliseconds = 0 //DownloadSection interleave time in milliseconds (0 for no delay) |
| cOmciEndSwDlDelaySeconds = 1 //End Software Download delay after last section (may be also configurable?) |
| cWaitCountEndSwDl = 6 //maximum number of EndSwDl requests |
| cWaitDelayEndSwDlSeconds = 10 //duration, how long is waited before next request on EndSwDl |
| //cOmciDownloadCompleteTimeout = 5400 //in s for the complete timeout (may be better scale to image size/ noOfWindows) |
| ) |
| |
| // tEndSwDlResponseResult - Response result from EndSwDownload as used in channel indication |
| type tUpgradePhase uint8 |
| |
| const ( |
| // undefined phase |
| cUpgradeUndefined tUpgradePhase = iota |
| // downloading image |
| cUpgradeDownloading |
| // image downloaded |
| cUpgradeDownloaded |
| // activating image |
| cUpgradeActivating |
| // image activated |
| cUpgradeActivated |
| // committing image |
| cUpgradeCommitting |
| // image committed |
| cUpgradeCommitted |
| ) |
| |
| // tEndSwDlResponseResult - Response result from EndSwDownload as used in channel indication |
| type tEndSwDlResponseResult uint8 |
| |
| const ( |
| // response success |
| cEndSwDlResponseSuccess tEndSwDlResponseResult = iota |
| // response busy (repeat) |
| cEndSwDlResponseBusy |
| // response error or abort waiting for response |
| cEndSwDlResponseAbort |
| ) |
| |
| // upgrade FSM related events |
| const ( |
| UpgradeEvStart = "UpgradeEvStart" |
| UpgradeEvDisable = "UpgradeEvDisable" |
| UpgradeEvAdapterDownload = "UpgradeEvAdapterDownload" |
| UpgradeEvPrepareSwDownload = "UpgradeEvPrepareSwDownload" |
| UpgradeEvRxStartSwDownload = "UpgradeEvRxStartSwDownload" |
| UpgradeEvWaitWindowAck = "UpgradeEvWaitWindowAck" |
| UpgradeEvContinueNextWindow = "UpgradeEvContinueNextWindow" |
| UpgradeEvEndSwDownload = "UpgradeEvEndSwDownload" |
| UpgradeEvWaitEndDownload = "UpgradeEvWaitEndDownload" |
| UpgradeEvContinueFinalize = "UpgradeEvContinueFinalize" |
| UpgradeEvCheckImageName = "UpgradeEvCheckImageName" |
| UpgradeEvWaitForActivate = "UpgradeEvWaitForActivate" |
| UpgradeEvRequestActivate = "UpgradeEvRequestActivate" |
| UpgradeEvActivationDone = "UpgradeEvActivationDone" |
| UpgradeEvWaitForCommit = "UpgradeEvWaitForCommit" |
| UpgradeEvCommitSw = "UpgradeEvCommitSw" |
| UpgradeEvCheckCommitted = "UpgradeEvCheckCommitted" |
| |
| //UpgradeEvTimeoutSimple = "UpgradeEvTimeoutSimple" |
| //UpgradeEvTimeoutMids = "UpgradeEvTimeoutMids" |
| UpgradeEvReset = "UpgradeEvReset" |
| UpgradeEvAbort = "UpgradeEvAbort" |
| UpgradeEvRestart = "UpgradeEvRestart" |
| UpgradeEvAbortSwDownload = "UpgradeEvAbortSwDownload" |
| ) |
| |
| // upgrade FSM related states |
| const ( |
| UpgradeStDisabled = "UpgradeStDisabled" |
| UpgradeStStarting = "UpgradeStStarting" |
| UpgradeStWaitingAdapterDL = "UpgradeStWaitingAdapterDL" |
| UpgradeStPreparingDL = "UpgradeStPreparingDL" |
| UpgradeStDLSection = "UpgradeStDLSection" |
| UpgradeStVerifyWindow = "UpgradeStVerifyWindow" |
| UpgradeStFinalizeDL = "UpgradeStFinalizeDL" |
| UpgradeStWaitEndDL = "UpgradeStWaitEndDL" |
| UpgradeStCheckImageName = "UpgradeStCheckImageName" |
| UpgradeStWaitForActivate = "UpgradeStWaitForActivate" |
| UpgradeStRequestingActivate = "UpgradeStRequestingActivate" |
| UpgradeStActivated = "UpgradeStActivated" |
| UpgradeStWaitForCommit = "UpgradeStWaitForCommit" |
| UpgradeStCommitSw = "UpgradeStCommitSw" |
| UpgradeStCheckCommitted = "UpgradeStCheckCommitted" |
| UpgradeStResetting = "UpgradeStResetting" |
| UpgradeStRestarting = "UpgradeStRestarting" |
| UpgradeStAbortingDL = "UpgradeStAbortingDL" |
| ) |
| |
| // COnuUpgradeFsmIdleState - required definition for IdleState detection for activities on OMCI |
| const COnuUpgradeFsmIdleState = UpgradeStWaitForCommit |
| |
| // OnuUpgradeFsm defines the structure for the state machine to config the PON ANI ports of ONU UNI ports via OMCI |
| type OnuUpgradeFsm struct { |
| pDeviceHandler cmn.IdeviceHandler |
| pDownloadManager *AdapterDownloadManager |
| pFileManager *FileDownloadManager //used from R2.8 with new API version |
| deviceID string |
| pDevEntry cmn.IonuDeviceEntry |
| pOmciCC *cmn.OmciCC |
| pOnuDB *devdb.OnuDeviceDB |
| requestEvent cmn.OnuDeviceEvent |
| //omciMIdsResponseReceived chan bool //seperate channel needed for checking multiInstance OMCI message responses |
| PAdaptFsm *cmn.AdapterFsm |
| pImageDsc *voltha.ImageDownload |
| imageBuffer []byte |
| origImageLength uint32 //as also limited by OMCI |
| imageCRC uint32 //as per OMCI - ITU I.363.5 crc |
| imageLength uint32 //including last bytes padding |
| omciDownloadWindowSizeLimit uint8 //windowSize-1 in sections |
| omciDownloadWindowSizeLast uint8 //number of sections in last window |
| noOfSections uint32 //uint32 range for sections should be sufficient for very long images |
| nextDownloadSectionsAbsolute uint32 //number of next section to download in overall image |
| nextDownloadSectionsWindow uint8 //number of next section to download within current window |
| noOfWindows uint32 //uint32 range for windows should be sufficient for very long images |
| nextDownloadWindow uint32 //number of next window to download |
| InactiveImageMeID uint16 //ME-ID of the inactive image |
| downloadToOnuTimeout4MB time.Duration //timeout for downloading the image to the ONU for a 4MB image slice |
| omciSectionInterleaveDelay time.Duration //DownloadSectionInterleave delay in milliseconds |
| delayEndSwDl bool //flag to provide a delay between last section and EndSwDl |
| repeatAbort bool //flag to indicate if OMCI EndSwDownload (abort) is to be repeated |
| pLastTxMeInstance *me.ManagedEntity |
| waitCountEndSwDl uint8 //number, how often is waited for EndSwDl at maximum |
| waitDelayEndSwDl time.Duration //duration, how long is waited before next request on EndSwDl |
| chReceiveExpectedResponse chan bool |
| useAPIVersion43 bool //flag for indication on which API version is used (and accordingly which specific methods) |
| mutexUpgradeParams sync.RWMutex //mutex to protect members for parallel function requests and omci response processing |
| imageVersion string //name of the image as used within OMCI (and on extrenal API interface) |
| imageIdentifier string //name of the image as used in the adapter |
| mutexIsAwaitingAdapterDlResponse sync.RWMutex |
| chAdapterDlReady chan bool |
| chAbortDelayEndSwDl chan struct{} |
| isWaitingForAdapterDlResponse bool |
| chOnuDlReady chan bool |
| activateImage bool |
| commitImage bool |
| mutexAbortRequest sync.RWMutex |
| abortRequested voltha.ImageState_ImageFailureReason |
| conditionalCancelRequested bool |
| upgradePhase tUpgradePhase |
| volthaDownloadState voltha.ImageState_ImageDownloadState |
| volthaDownloadReason voltha.ImageState_ImageFailureReason |
| volthaImageState voltha.ImageState_ImageActivationState |
| isEndSwDlOpen bool |
| chReceiveAbortEndSwDlResponse chan tEndSwDlResponseResult |
| isExtendedOmci bool |
| omciDownloadSectionSize int64 |
| } |
| |
| // NewOnuUpgradeFsm is the 'constructor' for the state machine to config the PON ANI ports |
| // |
| // of ONU UNI ports via OMCI |
| func NewOnuUpgradeFsm(ctx context.Context, apDeviceHandler cmn.IdeviceHandler, |
| apDevEntry cmn.IonuDeviceEntry, apOnuDB *devdb.OnuDeviceDB, |
| aRequestEvent cmn.OnuDeviceEvent, aName string, aCommChannel chan cmn.Message) *OnuUpgradeFsm { |
| instFsm := &OnuUpgradeFsm{ |
| pDeviceHandler: apDeviceHandler, |
| deviceID: apDeviceHandler.GetDeviceID(), |
| pDevEntry: apDevEntry, |
| pOmciCC: apDevEntry.GetDevOmciCC(), |
| pOnuDB: apOnuDB, |
| requestEvent: aRequestEvent, |
| omciSectionInterleaveDelay: cOmciSectionInterleaveMilliseconds, |
| downloadToOnuTimeout4MB: apDeviceHandler.GetDlToOnuTimeout4M(), |
| waitCountEndSwDl: cWaitCountEndSwDl, |
| waitDelayEndSwDl: cWaitDelayEndSwDlSeconds, |
| upgradePhase: cUpgradeUndefined, |
| volthaDownloadState: voltha.ImageState_DOWNLOAD_UNKNOWN, |
| volthaDownloadReason: voltha.ImageState_NO_ERROR, |
| volthaImageState: voltha.ImageState_IMAGE_UNKNOWN, |
| abortRequested: voltha.ImageState_NO_ERROR, |
| } |
| instFsm.chReceiveExpectedResponse = make(chan bool) |
| instFsm.chAdapterDlReady = make(chan bool) |
| instFsm.chAbortDelayEndSwDl = make(chan struct{}) |
| instFsm.chOnuDlReady = make(chan bool) |
| instFsm.chReceiveAbortEndSwDlResponse = make(chan tEndSwDlResponseResult) |
| |
| instFsm.isExtendedOmci = instFsm.pDevEntry.GetPersIsExtOmciSupported() |
| if instFsm.isExtendedOmci { |
| instFsm.omciDownloadSectionSize = cOmciDownloadSectionSizeExtLine |
| instFsm.omciDownloadWindowSizeLimit = cOmciDownloadWindowSizeLimitExtLine |
| } else { |
| instFsm.omciDownloadSectionSize = cOmciDownloadSectionSizeBaseLine |
| instFsm.omciDownloadWindowSizeLimit = cOmciDownloadWindowSizeLimitBaseLine |
| } |
| |
| instFsm.PAdaptFsm = cmn.NewAdapterFsm(aName, instFsm.deviceID, aCommChannel) |
| if instFsm.PAdaptFsm == nil { |
| logger.Errorw(ctx, "OnuUpgradeFsm's AdapterFsm could not be instantiated!!", log.Fields{ |
| "device-id": instFsm.deviceID}) |
| return nil |
| } |
| instFsm.PAdaptFsm.PFsm = fsm.NewFSM( |
| UpgradeStDisabled, |
| fsm.Events{ |
| {Name: UpgradeEvStart, Src: []string{UpgradeStDisabled}, Dst: UpgradeStStarting}, |
| {Name: UpgradeEvAdapterDownload, Src: []string{UpgradeStStarting}, Dst: UpgradeStWaitingAdapterDL}, |
| {Name: UpgradeEvPrepareSwDownload, Src: []string{UpgradeStStarting, UpgradeStWaitingAdapterDL}, Dst: UpgradeStPreparingDL}, |
| {Name: UpgradeEvRxStartSwDownload, Src: []string{UpgradeStPreparingDL}, Dst: UpgradeStDLSection}, |
| {Name: UpgradeEvWaitWindowAck, Src: []string{UpgradeStDLSection}, Dst: UpgradeStVerifyWindow}, |
| {Name: UpgradeEvContinueNextWindow, Src: []string{UpgradeStVerifyWindow}, Dst: UpgradeStDLSection}, |
| {Name: UpgradeEvEndSwDownload, Src: []string{UpgradeStVerifyWindow}, Dst: UpgradeStFinalizeDL}, |
| {Name: UpgradeEvWaitEndDownload, Src: []string{UpgradeStFinalizeDL}, Dst: UpgradeStWaitEndDL}, |
| {Name: UpgradeEvContinueFinalize, Src: []string{UpgradeStWaitEndDL}, Dst: UpgradeStFinalizeDL}, |
| //UpgradeStCheckImageName only used with useAPIVersion43 |
| {Name: UpgradeEvCheckImageName, Src: []string{UpgradeStWaitEndDL}, Dst: UpgradeStCheckImageName}, |
| //UpgradeEvWaitForActivate state transitions depend on useAPIVersion43 |
| {Name: UpgradeEvWaitForActivate, Src: []string{UpgradeStWaitEndDL, UpgradeStCheckImageName}, Dst: UpgradeStWaitForActivate}, |
| //UpgradeEvRequestActivate state transitions depend on useAPIVersion43 |
| {Name: UpgradeEvRequestActivate, Src: []string{UpgradeStStarting, UpgradeStWaitEndDL, UpgradeStCheckImageName, |
| UpgradeStWaitForActivate}, Dst: UpgradeStRequestingActivate}, //allows also for direct activation (without download) [TODO!!!] |
| {Name: UpgradeEvActivationDone, Src: []string{UpgradeStRequestingActivate}, Dst: UpgradeStActivated}, |
| {Name: UpgradeEvWaitForCommit, Src: []string{UpgradeStRequestingActivate}, Dst: UpgradeStWaitForCommit}, |
| {Name: UpgradeEvCommitSw, Src: []string{UpgradeStStarting, UpgradeStRequestingActivate, UpgradeStWaitForCommit, |
| UpgradeStActivated}, Dst: UpgradeStCommitSw}, //allows also for direct commitment (without download) [TODO!!!] |
| {Name: UpgradeEvCheckCommitted, Src: []string{UpgradeStCommitSw}, Dst: UpgradeStCheckCommitted}, |
| |
| /* |
| {Name: UpgradeEvTimeoutSimple, Src: []string{ |
| UpgradeStCreatingDot1PMapper, UpgradeStCreatingMBPCD, UpgradeStSettingTconts, UpgradeStSettingDot1PMapper}, Dst: UpgradeStStarting}, |
| {Name: UpgradeEvTimeoutMids, Src: []string{ |
| UpgradeStCreatingGemNCTPs, UpgradeStCreatingGemIWs, UpgradeStSettingPQs}, Dst: UpgradeStStarting}, |
| */ |
| // exceptional treatments |
| //on UpgradeEvReset: UpgradeStRequestingActivate, UpgradeStWaitForCommit and UpgradeStActivated are not reset |
| // (to let the FSM survive the expected OnuDown indication) |
| {Name: UpgradeEvReset, Src: []string{UpgradeStStarting, UpgradeStWaitingAdapterDL, UpgradeStPreparingDL, UpgradeStDLSection, |
| UpgradeStVerifyWindow, UpgradeStDLSection, UpgradeStFinalizeDL, UpgradeStWaitEndDL, UpgradeStCheckImageName, |
| UpgradeStWaitForActivate, |
| UpgradeStCommitSw, UpgradeStCheckCommitted, UpgradeStAbortingDL}, |
| Dst: UpgradeStResetting}, |
| {Name: UpgradeEvAbort, Src: []string{UpgradeStStarting, UpgradeStWaitingAdapterDL, UpgradeStPreparingDL, UpgradeStDLSection, |
| UpgradeStVerifyWindow, UpgradeStDLSection, UpgradeStFinalizeDL, UpgradeStWaitEndDL, UpgradeStCheckImageName, |
| UpgradeStWaitForActivate, |
| UpgradeStRequestingActivate, UpgradeStActivated, UpgradeStWaitForCommit, |
| UpgradeStCommitSw, UpgradeStCheckCommitted}, |
| Dst: UpgradeStResetting}, |
| {Name: UpgradeEvAbortSwDownload, Src: []string{UpgradeStResetting}, Dst: UpgradeStAbortingDL}, |
| {Name: UpgradeEvRestart, Src: []string{UpgradeStResetting, UpgradeStAbortingDL}, Dst: UpgradeStRestarting}, |
| {Name: UpgradeEvDisable, Src: []string{UpgradeStRestarting}, Dst: UpgradeStDisabled}, |
| }, |
| fsm.Callbacks{ |
| "enter_state": func(e *fsm.Event) { instFsm.PAdaptFsm.LogFsmStateChange(ctx, e) }, |
| "enter_" + UpgradeStStarting: func(e *fsm.Event) { instFsm.enterStarting(ctx, e) }, |
| "enter_" + UpgradeStWaitingAdapterDL: func(e *fsm.Event) { instFsm.enterWaitingAdapterDL(ctx, e) }, |
| "enter_" + UpgradeStPreparingDL: func(e *fsm.Event) { instFsm.enterPreparingDL(ctx, e) }, |
| "enter_" + UpgradeStDLSection: func(e *fsm.Event) { instFsm.enterDownloadSection(ctx, e) }, |
| "enter_" + UpgradeStVerifyWindow: func(e *fsm.Event) { instFsm.enterVerifyWindow(ctx, e) }, |
| "enter_" + UpgradeStFinalizeDL: func(e *fsm.Event) { instFsm.enterFinalizeDL(ctx, e) }, |
| "enter_" + UpgradeStWaitEndDL: func(e *fsm.Event) { instFsm.enterWaitEndDL(ctx, e) }, |
| "enter_" + UpgradeStCheckImageName: func(e *fsm.Event) { instFsm.enterCheckImageName(ctx, e) }, |
| "enter_" + UpgradeStRequestingActivate: func(e *fsm.Event) { instFsm.enterActivateSw(ctx, e) }, |
| "enter_" + UpgradeStCommitSw: func(e *fsm.Event) { instFsm.enterCommitSw(ctx, e) }, |
| "enter_" + UpgradeStCheckCommitted: func(e *fsm.Event) { instFsm.enterCheckCommitted(ctx, e) }, |
| "enter_" + UpgradeStResetting: func(e *fsm.Event) { instFsm.enterResetting(ctx, e) }, |
| "enter_" + UpgradeStAbortingDL: func(e *fsm.Event) { instFsm.enterAbortingDL(ctx, e) }, |
| "enter_" + UpgradeStRestarting: func(e *fsm.Event) { instFsm.enterRestarting(ctx, e) }, |
| "enter_" + UpgradeStDisabled: func(e *fsm.Event) { instFsm.enterDisabled(ctx, e) }, |
| }, |
| ) |
| if instFsm.PAdaptFsm.PFsm == nil { |
| logger.Errorw(ctx, "OnuUpgradeFsm's Base FSM could not be instantiated!!", log.Fields{ |
| "device-id": instFsm.deviceID}) |
| return nil |
| } |
| |
| logger.Debugw(ctx, "OnuUpgradeFsm created", log.Fields{"device-id": instFsm.deviceID}) |
| return instFsm |
| } |
| |
| // SetDownloadParams configures the needed parameters for a specific download to the ONU |
| // |
| // called from 'old' API Activate_image_update() |
| func (oFsm *OnuUpgradeFsm) SetDownloadParams(ctx context.Context, aInactiveImageID uint16, |
| apImageDsc *voltha.ImageDownload, apDownloadManager *AdapterDownloadManager) error { |
| pBaseFsm := oFsm.PAdaptFsm.PFsm |
| if pBaseFsm != nil && pBaseFsm.Is(UpgradeStStarting) { |
| oFsm.mutexUpgradeParams.Lock() |
| logger.Debugw(ctx, "OnuUpgradeFsm Parameter setting", log.Fields{ |
| "device-id": oFsm.deviceID, "image-description": apImageDsc}) |
| oFsm.InactiveImageMeID = aInactiveImageID //upgrade state machines run on configured inactive ImageId |
| oFsm.pImageDsc = apImageDsc |
| oFsm.pDownloadManager = apDownloadManager |
| oFsm.activateImage = true |
| oFsm.commitImage = true |
| oFsm.mutexUpgradeParams.Unlock() |
| |
| go func(aPBaseFsm *fsm.FSM) { |
| // let the upgrade FSM proceed to PreparingDL |
| _ = aPBaseFsm.Event(UpgradeEvPrepareSwDownload) |
| }(pBaseFsm) |
| return nil |
| } |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: invalid FSM base pointer or state", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return fmt.Errorf(fmt.Sprintf("OnuUpgradeFsm abort: invalid FSM base pointer or state for device-id: %s", oFsm.deviceID)) |
| } |
| |
| // SetDownloadParamsAfterDownload configures the needed parameters for a specific download to the ONU according to |
| // |
| // updated API interface with R2.8: start download to ONU if the image is downloaded to the adapter |
| // called from 'new' API Download_onu_image |
| func (oFsm *OnuUpgradeFsm) SetDownloadParamsAfterDownload(ctx context.Context, aInactiveImageID uint16, |
| apImageRequest *voltha.DeviceImageDownloadRequest, apDownloadManager *FileDownloadManager, |
| aImageIdentifier string) error { |
| oFsm.mutexUpgradeParams.Lock() |
| var pBaseFsm *fsm.FSM = nil |
| if oFsm.PAdaptFsm != nil { |
| pBaseFsm = oFsm.PAdaptFsm.PFsm |
| } |
| if pBaseFsm != nil && pBaseFsm.Is(UpgradeStStarting) { |
| logger.Debugw(ctx, "OnuUpgradeFsm Parameter setting", log.Fields{ |
| "device-id": oFsm.deviceID, "image-description": apImageRequest}) |
| oFsm.useAPIVersion43 = true |
| oFsm.InactiveImageMeID = aInactiveImageID //upgrade state machines run on configured inactive ImageId |
| oFsm.pFileManager = apDownloadManager |
| oFsm.imageIdentifier = aImageIdentifier |
| oFsm.imageVersion = apImageRequest.Image.Version |
| oFsm.activateImage = apImageRequest.ActivateOnSuccess |
| oFsm.commitImage = apImageRequest.CommitOnSuccess |
| oFsm.volthaDownloadState = voltha.ImageState_DOWNLOAD_STARTED //state change indication for download request |
| oFsm.mutexUpgradeParams.Unlock() |
| _ = pBaseFsm.Event(UpgradeEvAdapterDownload) //no need to call the FSM event in background here |
| return nil |
| } |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: invalid FSM base pointer or state", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return fmt.Errorf(fmt.Sprintf("OnuUpgradeFsm abort: invalid FSM base pointer or state for device-id: %s", oFsm.deviceID)) |
| } |
| |
| // SetActivationParamsRunning sets the activate and commit flags for a running download to the ONU according to adapters rpc call |
| // |
| // called from 'new' API Activate_onu_image |
| func (oFsm *OnuUpgradeFsm) SetActivationParamsRunning(ctx context.Context, |
| aImageIdentifier string, aCommit bool) error { |
| logger.Debugw(ctx, "OnuUpgradeFsm activate/commit parameter setting", log.Fields{ |
| "device-id": oFsm.deviceID, "image-id": aImageIdentifier, "commit": aCommit}) |
| oFsm.mutexUpgradeParams.Lock() |
| //set activate/commit independent from state, if FSM is already beyond concerned states, then it does not matter anyway |
| // (as long as the Imageidentifier is correct) |
| if aImageIdentifier != oFsm.imageIdentifier { |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: mismatching upgrade image", log.Fields{ |
| "device-id": oFsm.deviceID, "request-image": aImageIdentifier, "fsm-image": oFsm.imageIdentifier}) |
| oFsm.mutexUpgradeParams.Unlock() |
| return fmt.Errorf(fmt.Sprintf("OnuUpgradeFsm params ignored: requested image-name not used in current upgrade for device-id: %s", |
| oFsm.deviceID)) |
| } |
| oFsm.activateImage = true |
| oFsm.commitImage = aCommit |
| oFsm.mutexUpgradeParams.Unlock() |
| var pBaseFsm *fsm.FSM = nil |
| if oFsm.PAdaptFsm != nil { |
| pBaseFsm = oFsm.PAdaptFsm.PFsm |
| } |
| if pBaseFsm != nil { |
| if pBaseFsm.Is(UpgradeStWaitForActivate) { |
| logger.Debugw(ctx, "OnuUpgradeFsm finish waiting for activate", log.Fields{"device-id": oFsm.deviceID}) |
| _ = pBaseFsm.Event(UpgradeEvRequestActivate) //no need to call the FSM event in background here |
| } else { |
| logger.Debugw(ctx, "OnuUpgradeFsm not (yet?) waiting for activate", log.Fields{ |
| "device-id": oFsm.deviceID, "current FsmState": pBaseFsm.Current()}) |
| } |
| return nil |
| } |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: invalid FSM base pointer", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return fmt.Errorf(fmt.Sprintf("OnuUpgradeFsm abort: invalid FSM base pointer for device-id: %s", oFsm.deviceID)) |
| } |
| |
| // SetActivationParamsStart starts upgrade processing with immediate activation |
| // |
| // called from 'new' API Activate_onu_image |
| func (oFsm *OnuUpgradeFsm) SetActivationParamsStart(ctx context.Context, aImageVersion string, aInactiveImageID uint16, aCommit bool) error { |
| oFsm.mutexUpgradeParams.Lock() |
| var pBaseFsm *fsm.FSM = nil |
| if oFsm.PAdaptFsm != nil { |
| pBaseFsm = oFsm.PAdaptFsm.PFsm |
| } |
| if pBaseFsm != nil && pBaseFsm.Is(UpgradeStStarting) { |
| logger.Debugw(ctx, "OnuUpgradeFsm Parameter setting to start with activation", log.Fields{ |
| "device-id": oFsm.deviceID, "image-version": aImageVersion}) |
| oFsm.useAPIVersion43 = true |
| oFsm.InactiveImageMeID = aInactiveImageID //upgrade state machines run on configured inactive ImageId |
| oFsm.imageVersion = aImageVersion |
| oFsm.activateImage = true |
| oFsm.commitImage = aCommit |
| // indicate start of the upgrade activity |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_ACTIVATING //state change indication for activate request |
| oFsm.mutexUpgradeParams.Unlock() |
| //directly request the FSM to activate the image |
| _ = pBaseFsm.Event(UpgradeEvRequestActivate) //no need to call the FSM event in background here |
| return nil |
| } |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: invalid FSM base pointer or state", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return fmt.Errorf(fmt.Sprintf("OnuUpgradeFsm abort: invalid FSM base pointer or state for device-id: %s", oFsm.deviceID)) |
| } |
| |
| // SetCommitmentParamsRunning sets the commit flag for a running download to the ONU according to adapters rpc call |
| // |
| // called from 'new' API Commit_onu_image |
| func (oFsm *OnuUpgradeFsm) SetCommitmentParamsRunning(ctx context.Context, |
| aImageIdentifier string, aImageVersion string) error { |
| oFsm.mutexUpgradeParams.Lock() |
| //set commit independent from state, if FSM is already beyond commit state (just ready), then it does not matter anyway |
| // (as long as the Imageidentifier is correct) |
| logger.Debugw(ctx, "OnuUpgradeFsm commit parameter setting", log.Fields{ |
| "device-id": oFsm.deviceID, "image-id": aImageIdentifier, "image-version": aImageVersion}) |
| if (aImageIdentifier != oFsm.imageIdentifier) && (aImageVersion != oFsm.imageVersion) { |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: mismatching upgrade image", log.Fields{ |
| "device-id": oFsm.deviceID, "request-identifier": aImageIdentifier, "fsm-identifier": oFsm.imageIdentifier, |
| "request-version": aImageVersion, "fsm-version": oFsm.imageVersion}) |
| oFsm.mutexUpgradeParams.Unlock() |
| return fmt.Errorf(fmt.Sprintf("OnuUpgradeFsm params ignored: requested image-name not used in current upgrade for device-id: %s", |
| oFsm.deviceID)) |
| } |
| oFsm.commitImage = true |
| oFsm.mutexUpgradeParams.Unlock() |
| var pBaseFsm *fsm.FSM = nil |
| if oFsm.PAdaptFsm != nil { |
| pBaseFsm = oFsm.PAdaptFsm.PFsm |
| } |
| if pBaseFsm != nil { |
| //let the FSM decide if it is ready to process the event |
| logger.Debugw(ctx, "OnuUpgradeFsm requesting commit", |
| log.Fields{"device-id": oFsm.deviceID, "current FsmState": pBaseFsm.Current()}) |
| _ = pBaseFsm.Event(UpgradeEvCommitSw) //no need to call the FSM event in background here |
| return nil |
| } |
| //should never occur |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: invalid FSM base pointer", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return fmt.Errorf(fmt.Sprintf("OnuUpgradeFsm abort: invalid FSM base pointer for device-id: %s", oFsm.deviceID)) |
| } |
| |
| // SetCommitmentParamsStart starts upgrade processing with immediate commitment |
| // |
| // called from 'new' API Commit_onu_image |
| func (oFsm *OnuUpgradeFsm) SetCommitmentParamsStart(ctx context.Context, aImageVersion string, aActiveImageID uint16) error { |
| oFsm.mutexUpgradeParams.Lock() |
| var pBaseFsm *fsm.FSM = nil |
| if oFsm.PAdaptFsm != nil { |
| pBaseFsm = oFsm.PAdaptFsm.PFsm |
| } |
| if pBaseFsm != nil && pBaseFsm.Is(UpgradeStStarting) { |
| logger.Debugw(ctx, "OnuUpgradeFsm Parameter setting to start with commitment", log.Fields{ |
| "device-id": oFsm.deviceID, "image-version": aImageVersion}) |
| oFsm.useAPIVersion43 = true |
| oFsm.InactiveImageMeID = aActiveImageID //upgrade state machines inactive ImageId is the new active ImageId |
| oFsm.imageVersion = aImageVersion |
| oFsm.commitImage = true |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_COMMITTING //state change indication for activate request |
| oFsm.mutexUpgradeParams.Unlock() |
| //directly request the FSM to commit the image |
| _ = pBaseFsm.Event(UpgradeEvCommitSw) //no need to call the FSM event in background here |
| return nil |
| } |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: invalid FSM base pointer or state", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return fmt.Errorf(fmt.Sprintf("OnuUpgradeFsm abort: invalid FSM base pointer or state for device-id: %s", oFsm.deviceID)) |
| } |
| |
| // GetCommitFlag delivers the commit flag that was configured here |
| func (oFsm *OnuUpgradeFsm) GetCommitFlag(ctx context.Context) bool { |
| oFsm.mutexUpgradeParams.RLock() |
| defer oFsm.mutexUpgradeParams.RUnlock() |
| return oFsm.commitImage |
| } |
| |
| // GetImageStates delivers the download/image states as per device proto buf definition |
| func (oFsm *OnuUpgradeFsm) GetImageStates(ctx context.Context, |
| aImageIdentifier string, aVersion string) *voltha.ImageState { |
| pImageState := &voltha.ImageState{} |
| pImageState.Version = aVersion //version as requested |
| // check if the request refers to some active image/version of the processing |
| oFsm.mutexUpgradeParams.RLock() |
| if (aImageIdentifier == oFsm.imageIdentifier) || (aVersion == oFsm.imageVersion) { |
| pImageState.DownloadState = oFsm.volthaDownloadState |
| pImageState.Reason = oFsm.volthaDownloadReason |
| pImageState.ImageState = oFsm.volthaImageState |
| } else { |
| pImageState.DownloadState = voltha.ImageState_DOWNLOAD_UNKNOWN |
| pImageState.Reason = voltha.ImageState_NO_ERROR |
| pImageState.ImageState = voltha.ImageState_IMAGE_UNKNOWN |
| } |
| oFsm.mutexUpgradeParams.RUnlock() |
| return pImageState |
| } |
| |
| // SetImageStateActive sets the FSM internal volthaImageState to ImageState_IMAGE_ACTIVE |
| func (oFsm *OnuUpgradeFsm) SetImageStateActive(ctx context.Context) { |
| oFsm.mutexUpgradeParams.Lock() |
| defer oFsm.mutexUpgradeParams.Unlock() |
| oFsm.upgradePhase = cUpgradeActivated |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_ACTIVE |
| } |
| |
| // CancelProcessing ensures that suspended processing at waiting on some response is aborted and reset of FSM |
| func (oFsm *OnuUpgradeFsm) CancelProcessing(ctx context.Context, abCompleteAbort bool, |
| aReason voltha.ImageState_ImageFailureReason) { |
| pAdaptFsm := oFsm.PAdaptFsm |
| logger.Debugw(ctx, "CancelProcessing entered", log.Fields{"device-id": oFsm.deviceID}) |
| if pAdaptFsm == nil || pAdaptFsm.PFsm == nil { |
| logger.Warnw(ctx, "OnuUpgradeFsm cancel, but FSM invalid", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm start canceling", log.Fields{ |
| "device-id": oFsm.deviceID, "in fsm-state": pAdaptFsm.PFsm.Current()}) |
| oFsm.mutexAbortRequest.Lock() |
| oFsm.abortRequested = aReason //possibly abort the sectionDownload loop |
| oFsm.mutexAbortRequest.Unlock() |
| //mutex protection is required for possible concurrent access to FSM members |
| //attention: for an unbuffered channel the sender is blocked until the value is received (processed)! |
| // accordingly the mutex must be released before sending to channel here (mutex acquired in receiver) |
| oFsm.mutexIsAwaitingAdapterDlResponse.RLock() |
| if oFsm.isWaitingForAdapterDlResponse { |
| oFsm.mutexIsAwaitingAdapterDlResponse.RUnlock() |
| //use channel to indicate that the download response waiting shall be aborted for this device (channel) |
| oFsm.chAdapterDlReady <- false |
| } else { |
| oFsm.mutexIsAwaitingAdapterDlResponse.RUnlock() |
| } |
| |
| //abort a possible delaying of sending EndSwDl |
| //use asynchronous channel sending to avoid blocking here in case no receiver is waiting |
| select { |
| case oFsm.chAbortDelayEndSwDl <- struct{}{}: |
| default: |
| } |
| |
| //chOnuDlReady is cleared as part of the FSM reset processing (from enterResetting()) |
| |
| // in any case (even if it might be automatically requested by above cancellation of waiting) ensure resetting the FSM |
| // specific here: See definition of state changes: some states are excluded from reset for possible later commit |
| pAdaptFsm = oFsm.PAdaptFsm |
| if pAdaptFsm != nil && pAdaptFsm.PFsm != nil { |
| // calling FSM events in background to avoid blocking of the caller |
| go func(apFsm *fsm.FSM) { |
| if apFsm.Is(UpgradeStWaitEndDL) { |
| oFsm.chReceiveExpectedResponse <- false //which aborts the FSM in WaitEndDL state |
| } else if apFsm.Is(UpgradeStAbortingDL) { |
| oFsm.chReceiveAbortEndSwDlResponse <- cEndSwDlResponseAbort //abort waiting on EndDownloadResponse |
| } |
| |
| var err error |
| if abCompleteAbort { |
| // in case of unconditional abort request the ImageState is set immediately |
| oFsm.mutexUpgradeParams.Lock() |
| //any previous lingering conditional cancelRequest is superseded by this abortion |
| oFsm.conditionalCancelRequested = false |
| oFsm.volthaDownloadReason = aReason |
| oFsm.mutexUpgradeParams.Unlock() |
| err = apFsm.Event(UpgradeEvAbort) //as unconditional default FSM cancellation |
| } else { |
| //at conditional abort request the image states are set when reaching the reset state |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.conditionalCancelRequested = true |
| oFsm.mutexUpgradeParams.Unlock() |
| err = apFsm.Event(UpgradeEvReset) //as state-conditional default FSM cleanup |
| } |
| if err != nil { |
| //error return is expected in case of conditional request and no state transition |
| logger.Debugw(ctx, "onu upgrade fsm could not cancel with abort/reset event", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err}) |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm canceling done", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| }(pAdaptFsm.PFsm) |
| } else { //the FSM seems already to be in some released state |
| logger.Warnw(ctx, "OnuUpgradeFsm canceling without FSM event", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| } |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterStarting(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm start", log.Fields{"in state": e.FSM.Current(), |
| "device-id": oFsm.deviceID}) |
| |
| // start go routine for processing of LockState messages |
| go oFsm.processOmciUpgradeMessages(ctx) |
| } |
| |
| // enterWaitingAdapterDL state can only be reached with useAPIVersion43 |
| func (oFsm *OnuUpgradeFsm) enterWaitingAdapterDL(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm waiting for adapter download", log.Fields{"in state": e.FSM.Current(), |
| "device-id": oFsm.deviceID}) |
| syncChannel := make(chan struct{}) |
| go oFsm.waitOnDownloadToAdapterReady(ctx, syncChannel, oFsm.chAdapterDlReady) |
| //block until the wait routine is really blocked on chAdapterDlReady |
| <-syncChannel |
| go oFsm.pFileManager.RequestDownloadReady(ctx, oFsm.imageIdentifier, oFsm.chAdapterDlReady) |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterPreparingDL(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm prepare Download to Onu", log.Fields{"in state": e.FSM.Current(), |
| "device-id": oFsm.deviceID}) |
| |
| var fileLen int64 |
| var err error |
| oFsm.mutexUpgradeParams.Lock() |
| if oFsm.useAPIVersion43 { |
| //with the new API structure download to adapter is implicit and we have to wait until the image is available |
| fileLen, err = oFsm.pFileManager.GetImageBufferLen(ctx, oFsm.imageIdentifier) |
| } else { |
| fileLen, err = oFsm.pDownloadManager.getImageBufferLen(ctx, oFsm.pImageDsc.Name, oFsm.pImageDsc.LocalDir) |
| } |
| if err != nil || fileLen == 0 || fileLen > int64(cMaxUint32) { |
| oFsm.volthaDownloadReason = voltha.ImageState_UNKNOWN_ERROR //something like 'LOCAL_FILE_ERROR' would be better (proto) |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: problems getting image buffer length", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err, "length": fileLen}) |
| pBaseFsm := oFsm.PAdaptFsm |
| // Can't call FSM Event directly, decoupling it |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvAbort) |
| }(pBaseFsm) |
| return |
| } |
| |
| //copy file content to buffer |
| var imageBuffer []byte |
| if oFsm.useAPIVersion43 { |
| imageBuffer, err = oFsm.pFileManager.GetDownloadImageBuffer(ctx, oFsm.imageIdentifier) |
| } else { |
| imageBuffer, err = oFsm.pDownloadManager.getDownloadImageBuffer(ctx, oFsm.pImageDsc.Name, oFsm.pImageDsc.LocalDir) |
| } |
| if err != nil { |
| oFsm.volthaDownloadReason = voltha.ImageState_UNKNOWN_ERROR //something like 'LOCAL_FILE_ERROR' would be better (proto) |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm abort: can't get image buffer", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err}) |
| pBaseFsm := oFsm.PAdaptFsm |
| // Can't call FSM Event directly, decoupling it |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvAbort) |
| }(pBaseFsm) |
| return |
| } |
| //provide slice capacity already with the reserve of one section to avoid inflation of the slice to double size at append |
| oFsm.imageBuffer = make([]byte, fileLen, fileLen+oFsm.omciDownloadSectionSize) |
| //better use a copy of the read image buffer in case the buffer/file is modified from outside, |
| // this also limits the slice len to the expected maximum fileLen |
| copy(oFsm.imageBuffer, imageBuffer) |
| |
| oFsm.noOfSections = uint32(fileLen / oFsm.omciDownloadSectionSize) |
| if fileLen%oFsm.omciDownloadSectionSize > 0 { |
| // Because the extended message format allows for variable length, |
| // software image sections are only padded in baseline message format |
| if !oFsm.isExtendedOmci { |
| bufferPadding := make([]byte, oFsm.omciDownloadSectionSize-fileLen%oFsm.omciDownloadSectionSize) |
| //expand the imageBuffer to exactly fit multiples of cOmciDownloadSectionSize with padding |
| oFsm.imageBuffer = append(oFsm.imageBuffer, bufferPadding...) |
| } |
| oFsm.noOfSections++ |
| } |
| oFsm.origImageLength = uint32(fileLen) |
| oFsm.imageLength = uint32(len(oFsm.imageBuffer)) |
| logger.Infow(ctx, "OnuUpgradeFsm starts with StartSwDl values", log.Fields{ |
| "MeId": oFsm.InactiveImageMeID, "windowSizeLimit": oFsm.omciDownloadWindowSizeLimit, |
| "ImageSize": oFsm.imageLength, "original file size": fileLen}) |
| //"NumberOfCircuitPacks": oFsm.numberCircuitPacks, "CircuitPacks MeId": 0}) //parallel circuit packs download not supported |
| |
| oFsm.mutexUpgradeParams.Unlock() |
| |
| // flush chOnuDlReady |
| select { |
| case <-oFsm.chOnuDlReady: |
| logger.Debug(ctx, "flushed OnuDlReady channel") |
| default: |
| } |
| go oFsm.waitOnDownloadToOnuReady(ctx, oFsm.chOnuDlReady) // start supervision of the complete download-to-ONU procedure |
| |
| err = oFsm.pOmciCC.SendStartSoftwareDownload(log.WithSpanFromContext(context.Background(), ctx), oFsm.pDeviceHandler.GetOmciTimeout(), false, |
| oFsm.PAdaptFsm.CommChan, oFsm.InactiveImageMeID, oFsm.omciDownloadWindowSizeLimit, oFsm.origImageLength, oFsm.isExtendedOmci) |
| if err != nil { |
| logger.Errorw(ctx, "StartSwDl abort: can't send section", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err}) |
| oFsm.abortOnOmciError(ctx, true) |
| return |
| } |
| oFsm.isEndSwDlOpen = true |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterDownloadSection(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm start downloading sections", log.Fields{ |
| "device-id": oFsm.deviceID, "absolute window": oFsm.nextDownloadWindow}) |
| //use a background routine to send the multiple download sections frames in a loop |
| // in order to avoid blocking on synchronous event calls for the entire (long) processing time |
| go oFsm.runSwDlSectionWindow(ctx) |
| } |
| |
| // runSwDlSectionWindow runs a loop to send all DlSection frames of one window in background |
| // |
| // may be aborted by parallel change of abortRequested |
| func (oFsm *OnuUpgradeFsm) runSwDlSectionWindow(ctx context.Context) { |
| var windowAckRequest uint8 = 0 |
| var bufferStartOffset uint32 |
| var bufferEndOffset uint32 |
| var downloadSection []byte |
| |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.upgradePhase = cUpgradeDownloading //start of downloading image to ONU |
| if oFsm.nextDownloadSectionsAbsolute == 0 { |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_DOWNLOADING |
| } |
| //var omuTxSecPerWindow []*common.OmciTransferStructure |
| omciMsgsPerSection := &ia.OmciMessages{} |
| //take the TID mutex |
| //To ensure the insequesnce of TIDS for all the onusw sections within a window |
| oFsm.pOmciCC.LockMutexTID() |
| defer oFsm.pOmciCC.UnLockMutexTID() |
| for { |
| oFsm.mutexAbortRequest.RLock() |
| // this way out of the section download loop on abort request |
| if oFsm.abortRequested != voltha.ImageState_NO_ERROR { |
| //states are updated when entering the reset state ... |
| oFsm.volthaDownloadReason = oFsm.abortRequested |
| oFsm.mutexAbortRequest.RUnlock() |
| oFsm.mutexUpgradeParams.Unlock() |
| pUpgradeFsm := oFsm.PAdaptFsm |
| if pUpgradeFsm != nil { |
| _ = pUpgradeFsm.PFsm.Event(UpgradeEvAbort) |
| logger.Debugw(ctx, "aborting runSwDlSectionWindow", log.Fields{ |
| "device-id": oFsm.deviceID, "reason": oFsm.volthaDownloadReason}) |
| return |
| } |
| logger.Warnw(ctx, "pUpgradeFsm is nil", log.Fields{"device-id": oFsm.deviceID}) |
| return |
| } |
| oFsm.mutexAbortRequest.RUnlock() |
| |
| bufferStartOffset = oFsm.nextDownloadSectionsAbsolute * uint32(oFsm.omciDownloadSectionSize) |
| bufferEndOffset = bufferStartOffset + uint32(oFsm.omciDownloadSectionSize) - 1 |
| if oFsm.isExtendedOmci { |
| if bufferEndOffset > oFsm.origImageLength-1 { |
| bufferEndOffset = oFsm.origImageLength - 1 |
| } |
| } |
| logger.Debugw(ctx, "DlSection values are", log.Fields{ |
| "DlSectionNoAbsolute": oFsm.nextDownloadSectionsAbsolute, |
| "DlSectionWindow": oFsm.nextDownloadSectionsWindow, |
| "startOffset": bufferStartOffset, "endOffset": bufferEndOffset}) |
| if bufferStartOffset+1 > oFsm.imageLength || bufferEndOffset+1 > oFsm.imageLength { //should never occur in this state |
| logger.Errorw(ctx, "OnuUpgradeFsm buffer error: exceeded length", log.Fields{ |
| "device-id": oFsm.deviceID, "bufferStartOffset": bufferStartOffset, |
| "bufferEndOffset": bufferEndOffset, "imageLength": oFsm.imageLength}) |
| oFsm.volthaDownloadReason = voltha.ImageState_UNKNOWN_ERROR //something like 'LOCAL_FILE_ERROR' would be better (proto) |
| oFsm.mutexUpgradeParams.Unlock() |
| //logical error -- reset the FSM |
| pUpgradeFsm := oFsm.PAdaptFsm |
| if pUpgradeFsm != nil { |
| _ = pUpgradeFsm.PFsm.Event(UpgradeEvAbort) |
| return |
| } |
| logger.Warnw(ctx, "pUpgradeFsm is nil", log.Fields{"device-id": oFsm.deviceID}) |
| return |
| } |
| downloadSection = oFsm.imageBuffer[bufferStartOffset : bufferEndOffset+1] |
| if oFsm.nextDownloadSectionsWindow == oFsm.omciDownloadWindowSizeLimit { |
| windowAckRequest = 1 |
| logger.Debugw(ctx, "DlSection expect Response for complete window", log.Fields{ |
| "device-id": oFsm.deviceID, "in window": oFsm.nextDownloadWindow}) |
| } |
| if oFsm.nextDownloadSectionsAbsolute+1 >= oFsm.noOfSections { |
| windowAckRequest = 1 |
| |
| oFsm.omciDownloadWindowSizeLast = oFsm.nextDownloadSectionsWindow |
| logger.Infow(ctx, "DlSection expect Response for last window (section)", log.Fields{ |
| "device-id": oFsm.deviceID, "DlSectionNoAbsolute": oFsm.nextDownloadSectionsAbsolute}) |
| } |
| oFsm.mutexUpgradeParams.Unlock() //unlock here to give other functions some chance to process during/after the send request |
| omciTxReq, err := oFsm.pOmciCC.PrepareOnuSectionsOfWindow(log.WithSpanFromContext(context.Background(), ctx), |
| oFsm.InactiveImageMeID, windowAckRequest, oFsm.nextDownloadSectionsWindow, downloadSection, omciMsgsPerSection, oFsm.isExtendedOmci) |
| if err != nil { |
| logger.Errorw(ctx, "DlSection abort: can't send section", log.Fields{ |
| "device-id": oFsm.deviceID, "section absolute": oFsm.nextDownloadSectionsAbsolute, "error": err}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.nextDownloadSectionsAbsolute++ //always increase the absolute section counter after having sent one |
| if windowAckRequest == 1 { |
| oFsm.mutexUpgradeParams.Unlock() |
| |
| if omciTxReq.OnuSwWindow == nil { |
| logger.Errorw(ctx, "fail to send sections in a window", log.Fields{ |
| "device-id": oFsm.deviceID, "section absolute": oFsm.nextDownloadSectionsAbsolute, "error": err}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| |
| pUpgradeFsm := oFsm.PAdaptFsm |
| if pUpgradeFsm != nil { |
| _ = pUpgradeFsm.PFsm.Event(UpgradeEvWaitWindowAck) //state transition to upgradeStVerifyWindow |
| oFsm.pOmciCC.SendOnuSwSectionsWindowWithRxSupervision(ctx, omciTxReq, oFsm.pDeviceHandler.GetOmciTimeout(), oFsm.PAdaptFsm.CommChan) |
| return |
| } |
| logger.Warnw(ctx, "pUpgradeFsm is nil", log.Fields{"device-id": oFsm.deviceID}) |
| return |
| } |
| |
| oFsm.nextDownloadSectionsWindow++ //increase the window related section counter only if not in the last section |
| if oFsm.omciSectionInterleaveDelay > 0 { |
| //ensure a defined intersection-time-gap to leave space for further processing, other ONU's ... |
| oFsm.mutexUpgradeParams.Unlock() //unlock here to give other functions some chance to process during/after the send request |
| time.Sleep(oFsm.omciSectionInterleaveDelay * time.Millisecond) |
| oFsm.mutexUpgradeParams.Lock() |
| } |
| } |
| } //runSwDlSectionWindow |
| |
| func (oFsm *OnuUpgradeFsm) enterVerifyWindow(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm verify DL window ack", log.Fields{ |
| "for window": oFsm.nextDownloadWindow, "device-id": oFsm.deviceID}) |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterFinalizeDL(ctx context.Context, e *fsm.Event) { |
| logger.Infow(ctx, "OnuUpgradeFsm finalize DL", log.Fields{ |
| "device-id": oFsm.deviceID, "crc": strconv.FormatInt(int64(oFsm.imageCRC), 16), "delay": oFsm.delayEndSwDl}) |
| //use a background routine to wait EndSwDlDelay and then send the EndSwDl request |
| // in order to avoid blocking on synchronous event calls for the complete wait time |
| // and to allow for state transition before sending the EndSwDl request |
| go oFsm.delayAndSendEndSwDl(ctx) |
| } |
| |
| // delayAndSendEndSwDl ensures a delay before sending the EndSwDl request |
| // |
| // may also be aborted by parallel channel reception on chAbortEndSwDl |
| func (oFsm *OnuUpgradeFsm) delayAndSendEndSwDl(ctx context.Context) { |
| oFsm.mutexUpgradeParams.RLock() |
| if oFsm.delayEndSwDl { |
| oFsm.mutexUpgradeParams.RUnlock() |
| //give the ONU some time for image evaluation (hoping it does not only start this evaluation on first EndSwDl itself) |
| logger.Debugw(ctx, "OnuUpgradeFsm delay EndSwDl", log.Fields{"device-id": oFsm.deviceID, |
| "duration_s": cOmciEndSwDlDelaySeconds}) |
| select { |
| case <-time.After(cOmciEndSwDlDelaySeconds * time.Second): |
| logger.Warnw(ctx, "OnuUpgradeFsm start sending EndSwDl", log.Fields{ |
| "for device-id": oFsm.deviceID, "image-id": oFsm.imageIdentifier}) |
| case <-oFsm.chAbortDelayEndSwDl: |
| logger.Debugw(ctx, "OnuUpgradeFsm abort request to send EndSwDl", log.Fields{"device-id": oFsm.deviceID}) |
| //according further state transition is ensured by the entity that sent the abort |
| return |
| } |
| } else { |
| oFsm.mutexUpgradeParams.RUnlock() |
| } |
| |
| pBaseFsm := oFsm.PAdaptFsm |
| if pBaseFsm == nil { |
| logger.Errorw(ctx, "EndSwDl abort: BaseFsm invalid", log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.volthaDownloadReason = voltha.ImageState_UNKNOWN_ERROR |
| oFsm.mutexUpgradeParams.Unlock() |
| // Can't call FSM Event directly, decoupling it |
| _ = pBaseFsm.PFsm.Event(UpgradeEvAbort) |
| return |
| } |
| err := oFsm.pOmciCC.SendEndSoftwareDownload(log.WithSpanFromContext(context.Background(), ctx), oFsm.pDeviceHandler.GetOmciTimeout(), false, |
| oFsm.PAdaptFsm.CommChan, oFsm.InactiveImageMeID, oFsm.origImageLength, oFsm.imageCRC, oFsm.isExtendedOmci) |
| |
| if err != nil { |
| logger.Errorw(ctx, "EndSwDl abort: error sending EndSwDl", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err}) |
| oFsm.abortOnOmciError(ctx, true) |
| return |
| } |
| //from here on sending of EndSwDl(Abort) is not needed anymore (even though response is not yet received) |
| // this avoids sending of both EndSwDl(Success) and EndSwDl(Abort) when cancellation falls just into this window |
| // the ONU must theoretically be prepared to receive none of them (in case of OMCI transfer issues) e.g. by timeout |
| oFsm.isEndSwDlOpen = false |
| // wait for the EndSwDLResponse and check, if the ONU is ready for activation |
| _ = pBaseFsm.PFsm.Event(UpgradeEvWaitEndDownload) |
| } //delayAndSendEndSwDl |
| |
| func (oFsm *OnuUpgradeFsm) enterWaitEndDL(ctx context.Context, e *fsm.Event) { |
| logger.Infow(ctx, "OnuUpgradeFsm WaitEndDl", log.Fields{ |
| "device-id": oFsm.deviceID, "wait delay": oFsm.waitDelayEndSwDl * time.Second, "wait count": oFsm.waitCountEndSwDl}) |
| if oFsm.waitCountEndSwDl == 0 { |
| logger.Errorw(ctx, "WaitEndDl abort: max limit of EndSwDL reached", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| pBaseFsm := oFsm.PAdaptFsm |
| if pBaseFsm == nil { |
| logger.Errorw(ctx, "WaitEndDl abort: BaseFsm invalid", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return |
| } |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.volthaDownloadReason = voltha.ImageState_IMAGE_REFUSED_BY_ONU //something like 'END_DOWNLOAD_TIMEOUT' would be better (proto) |
| oFsm.mutexUpgradeParams.Unlock() |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvAbort) |
| }(pBaseFsm) |
| return |
| } |
| |
| oFsm.waitCountEndSwDl-- |
| select { |
| case <-time.After(oFsm.waitDelayEndSwDl * time.Second): |
| pBaseFsm := oFsm.PAdaptFsm |
| if pBaseFsm == nil { |
| logger.Errorw(ctx, "WaitEndDl abort: BaseFsm invalid", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| //FSM may be reset already from somewhere else, nothing we can do here anymore |
| return |
| } |
| //retry End SW DL |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.delayEndSwDl = false //no more extra delay for the request |
| oFsm.mutexUpgradeParams.Unlock() |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvContinueFinalize) |
| }(pBaseFsm) |
| return |
| case success := <-oFsm.chReceiveExpectedResponse: |
| logger.Debugw(ctx, "WaitEndDl stop wait timer", log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.isEndSwDlOpen = false //no request to abort of download (already finished or immediate abort) |
| pBaseFsm := oFsm.PAdaptFsm |
| if pBaseFsm == nil { |
| logger.Errorw(ctx, "WaitEndDl abort: BaseFsm invalid", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| //FSM may be reset already from somewhere else, nothing we can do here anymore |
| return |
| } |
| if success { |
| //answer received with ready indication |
| //useAPIVersion43 may not conflict in concurrency in this state function |
| if oFsm.useAPIVersion43 { // newer API usage requires verification of downloaded image version |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvCheckImageName) |
| }(pBaseFsm) |
| } else { // elder API usage does not support image version check -immediately consider download as successful |
| if oFsm.activateImage { |
| //immediate activation requested |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvRequestActivate) |
| }(pBaseFsm) |
| } else { |
| //have to wait on explicit activation request |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvWaitForActivate) |
| }(pBaseFsm) |
| } |
| } |
| return |
| } |
| //timer was aborted |
| oFsm.abortOnOmciError(ctx, true) |
| return |
| } |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterCheckImageName(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm checking downloaded image name", log.Fields{ |
| "device-id": oFsm.deviceID, "me-id": oFsm.InactiveImageMeID}) |
| requestedAttributes := me.AttributeValueMap{me.SoftwareImage_IsCommitted: 0, me.SoftwareImage_IsActive: 0, me.SoftwareImage_Version: ""} |
| meInstance, err := oFsm.pOmciCC.SendGetMe(log.WithSpanFromContext(context.Background(), ctx), |
| me.SoftwareImageClassID, oFsm.InactiveImageMeID, requestedAttributes, oFsm.pDeviceHandler.GetOmciTimeout(), |
| false, oFsm.PAdaptFsm.CommChan, oFsm.isExtendedOmci) |
| if err != nil { |
| logger.Errorw(ctx, "OnuUpgradeFsm get Software Image ME result error", |
| log.Fields{"device-id": oFsm.deviceID, "Error": err}) |
| oFsm.abortOnOmciError(ctx, true) |
| return |
| } |
| oFsm.pLastTxMeInstance = meInstance |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterActivateSw(ctx context.Context, e *fsm.Event) { |
| logger.Infow(ctx, "OnuUpgradeFsm activate SW", log.Fields{ |
| "device-id": oFsm.deviceID, "me-id": oFsm.InactiveImageMeID}) |
| |
| err := oFsm.pOmciCC.SendActivateSoftware(log.WithSpanFromContext(context.Background(), ctx), oFsm.pDeviceHandler.GetOmciTimeout(), false, |
| oFsm.PAdaptFsm.CommChan, oFsm.InactiveImageMeID, oFsm.isExtendedOmci) |
| if err != nil { |
| logger.Errorw(ctx, "ActivateSw abort: can't send activate frame", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err}) |
| oFsm.abortOnOmciError(ctx, true) |
| return |
| } |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.upgradePhase = cUpgradeActivating //start of image activation for ONU |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_ACTIVATING |
| oFsm.mutexUpgradeParams.Unlock() |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterCommitSw(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm start commit SW", log.Fields{ |
| "device-id": oFsm.deviceID, "me-id": oFsm.InactiveImageMeID}) |
| //any abort request (also conditional) is still regarded as valid as the commit indication might not be possible to verify |
| // (which is a bit problematic as the ONU might already be in committed state, |
| // in this case (committing failed) always 'onuimage list' should be used to verify the real state (if ONU is reachable)) |
| if activeImageID, err := oFsm.pDevEntry.GetActiveImageMeID(ctx); err == nil { |
| oFsm.mutexUpgradeParams.Lock() |
| if activeImageID == oFsm.InactiveImageMeID { |
| inactiveImageID := oFsm.InactiveImageMeID |
| logger.Infow(ctx, "OnuUpgradeFsm commit SW", log.Fields{ |
| "device-id": oFsm.deviceID, "me-id": inactiveImageID}) //more efficient activeImageID with above check |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_COMMITTING |
| oFsm.upgradePhase = cUpgradeCommitting //start of image commitment for ONU |
| oFsm.mutexUpgradeParams.Unlock() |
| err := oFsm.pOmciCC.SendCommitSoftware(log.WithSpanFromContext(context.Background(), ctx), oFsm.pDeviceHandler.GetOmciTimeout(), false, |
| oFsm.PAdaptFsm.CommChan, inactiveImageID, oFsm.isExtendedOmci) //more efficient activeImageID with above check |
| if err != nil { |
| logger.Errorw(ctx, "CommitSw abort: can't send commit sw frame", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err}) |
| oFsm.abortOnOmciError(ctx, true) |
| return |
| } |
| return |
| } |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm active ImageId <> IdToCommit", log.Fields{ |
| "device-id": oFsm.deviceID, "active ID": activeImageID, "to commit ID": oFsm.InactiveImageMeID}) |
| } else { |
| logger.Errorw(ctx, "OnuUpgradeFsm can't commit, no valid active image", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| } |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.conditionalCancelRequested = false //any lingering conditional cancelRequest is superseded by this error |
| oFsm.volthaDownloadReason = voltha.ImageState_CANCELLED_ON_ONU_STATE |
| oFsm.mutexUpgradeParams.Unlock() |
| //TODO!!!: possibly send event information for aborted upgrade (aborted by omci processing)?? |
| pBaseFsm := oFsm.PAdaptFsm |
| // Can't call FSM Event directly, decoupling it |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvAbort) |
| }(pBaseFsm) |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterCheckCommitted(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm checking committed SW", log.Fields{ |
| "device-id": oFsm.deviceID, "me-id": oFsm.InactiveImageMeID}) |
| requestedAttributes := me.AttributeValueMap{me.SoftwareImage_IsCommitted: 0, me.SoftwareImage_IsActive: 0, me.SoftwareImage_Version: ""} |
| meInstance, err := oFsm.pOmciCC.SendGetMe(log.WithSpanFromContext(context.Background(), ctx), |
| me.SoftwareImageClassID, oFsm.InactiveImageMeID, requestedAttributes, |
| oFsm.pDeviceHandler.GetOmciTimeout(), false, oFsm.PAdaptFsm.CommChan, oFsm.isExtendedOmci) |
| if err != nil { |
| logger.Errorw(ctx, "OnuUpgradeFsm get Software Image ME result error", |
| log.Fields{"device-id": oFsm.deviceID, "Error": err}) |
| oFsm.abortOnOmciError(ctx, true) |
| return |
| } |
| oFsm.pLastTxMeInstance = meInstance |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterResetting(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm resetting", log.Fields{"device-id": oFsm.deviceID}) |
| |
| oFsm.stateUpdateOnReset(ctx) |
| |
| oFsm.mutexAbortRequest.Lock() |
| //to be sure to abort a possibly still running runSwDlSectionWindow() |
| // in case the reset was not received from cancel() and download not finished correctly |
| oFsm.abortRequested = oFsm.volthaDownloadReason |
| oFsm.mutexAbortRequest.Unlock() |
| |
| // in case the download-to-ONU timer is still running - cancel it |
| //use non-blocking channel (to be independent from receiver state) |
| select { |
| //use channel to indicate that the download response waiting shall be aborted for this device (channel) |
| case oFsm.chOnuDlReady <- false: |
| default: |
| } |
| pConfigUpgradeStateAFsm := oFsm.PAdaptFsm |
| if pConfigUpgradeStateAFsm != nil { |
| var nextEvent string |
| if oFsm.isEndSwDlOpen { |
| if oFsm.repeatAbort { |
| oFsm.delayEndSwDl = true //run next abort with delay |
| } else { //initial request |
| oFsm.delayEndSwDl = false //run next abort with no delay |
| oFsm.waitCountEndSwDl = cWaitCountEndSwDl //init for possible repetitions |
| } |
| nextEvent = UpgradeEvAbortSwDownload |
| } else { |
| nextEvent = UpgradeEvRestart |
| } |
| // Can't call FSM Event directly, decoupling it |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.PFsm != nil { |
| _ = a_pAFsm.PFsm.Event(nextEvent) |
| } |
| }(pConfigUpgradeStateAFsm) |
| } |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterAbortingDL(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm aborting download to ONU", log.Fields{"device-id": oFsm.deviceID}) |
| |
| oFsm.mutexUpgradeParams.RLock() |
| if oFsm.delayEndSwDl { |
| oFsm.mutexUpgradeParams.RUnlock() |
| //give the ONU some time for image discard activities |
| time.Sleep(cOmciEndSwDlDelaySeconds * time.Second) |
| } else { |
| oFsm.mutexUpgradeParams.RUnlock() |
| } |
| |
| pBaseFsm := oFsm.PAdaptFsm |
| if pBaseFsm == nil { |
| logger.Errorw(ctx, "OnuUpgradeFsm aborting download: BaseFsm invalid", log.Fields{"device-id": oFsm.deviceID}) |
| return |
| } |
| // abort the download operation by sending an end software download message with invalid CRC and image size |
| err := oFsm.pOmciCC.SendEndSoftwareDownload(log.WithSpanFromContext(context.Background(), ctx), oFsm.pDeviceHandler.GetOmciTimeout(), false, |
| oFsm.PAdaptFsm.CommChan, oFsm.InactiveImageMeID, 0, 0xFFFFFFFF, oFsm.isExtendedOmci) |
| |
| if err != nil { |
| logger.Errorw(ctx, "OnuUpgradeFsm aborting download: can't send EndSwDl request", log.Fields{"device-id": oFsm.deviceID}) |
| // Can't call FSM Event directly, decoupling it |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.PFsm != nil { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvRestart) |
| } |
| }(pBaseFsm) |
| return |
| } |
| |
| //avoid waiting in the enterXXX function here, |
| // otherwise synchronous event calls (like from RxMessage processing) may block and block complete Rx processing then |
| go oFsm.waitOnAbortEndSwDlResponse(ctx) |
| } |
| |
| // abortingDlEvaluateResponse waits for a channel indication with decision to proceed the FSM processing |
| func (oFsm *OnuUpgradeFsm) abortingDlEvaluateResponse(ctx context.Context, |
| pBaseFsm *cmn.AdapterFsm, aResponseResult tEndSwDlResponseResult) bool { |
| switch aResponseResult { |
| case cEndSwDlResponseBusy: // indication for device busy, needs repetition |
| if oFsm.waitCountEndSwDl == 0 { |
| logger.Errorw(ctx, "aborting download: max limit of EndSwDl reached", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.PFsm != nil { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvRestart) //give up and let FSM terminate |
| } |
| }(pBaseFsm) |
| } else { |
| logger.Debugw(ctx, "aborting download: re-trigger sending abort SwDl", log.Fields{ |
| "device-id": oFsm.deviceID, "counter": oFsm.waitCountEndSwDl}) |
| oFsm.waitCountEndSwDl-- |
| oFsm.repeatAbort = true //repeated request in next round |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.PFsm != nil { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvReset) //which then re-triggers sending AbortSwDL |
| } |
| }(pBaseFsm) |
| } |
| return true |
| case cEndSwDlResponseSuccess: // indication for success response |
| logger.Infow(ctx, "aborting download: success response, terminating FSM", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| case cEndSwDlResponseAbort: // indication for request to abort waiting for response |
| logger.Infow(ctx, "aborting download: request to abort waiting, terminating FSM", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| default: |
| logger.Errorw(ctx, "aborting download: unknown channel indication, terminating FSM", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| } //switch |
| return false |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterRestarting(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm restarting", log.Fields{"device-id": oFsm.deviceID}) |
| pConfigUpgradeStateAFsm := oFsm.PAdaptFsm |
| if pConfigUpgradeStateAFsm != nil { |
| // abort running message processing |
| fsmAbortMsg := cmn.Message{ |
| Type: cmn.TestMsg, |
| Data: cmn.TestMessage{ |
| TestMessageVal: cmn.AbortMessageProcessing, |
| }, |
| } |
| pConfigUpgradeStateAFsm.CommChan <- fsmAbortMsg |
| |
| //try to restart the FSM to 'disabled' |
| // Can't call FSM Event directly, decoupling it |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| if a_pAFsm != nil && a_pAFsm.PFsm != nil { |
| _ = a_pAFsm.PFsm.Event(UpgradeEvDisable) |
| } |
| }(pConfigUpgradeStateAFsm) |
| } |
| } |
| |
| func (oFsm *OnuUpgradeFsm) enterDisabled(ctx context.Context, e *fsm.Event) { |
| logger.Debugw(ctx, "OnuUpgradeFsm enters disabled state", log.Fields{"device-id": oFsm.deviceID}) |
| // no need to flush possible channels here, Upgrade FSM will be completely removed, garbage collector should find its way |
| if oFsm.pDeviceHandler != nil { |
| //request removal of 'reference' in the Handler (completely clear the FSM and its data) |
| pLastUpgradeImageState := &voltha.ImageState{ |
| Version: oFsm.imageVersion, |
| DownloadState: oFsm.volthaDownloadState, |
| Reason: oFsm.volthaDownloadReason, |
| ImageState: oFsm.volthaImageState, |
| } |
| go oFsm.pDeviceHandler.RemoveOnuUpgradeFsm(ctx, pLastUpgradeImageState) |
| } |
| } |
| |
| func (oFsm *OnuUpgradeFsm) processOmciUpgradeMessages(ctx context.Context) { //ctx context.Context? |
| logger.Debugw(ctx, "Start OnuUpgradeFsm Msg processing", log.Fields{"for device-id": oFsm.deviceID}) |
| loop: |
| for { |
| // case <-ctx.Done(): |
| // logger.Info(ctx,"MibSync Msg", log.Fields{"Message handling canceled via context for device-id": oFsm.deviceID}) |
| // break loop |
| message, ok := <-oFsm.PAdaptFsm.CommChan |
| if !ok { |
| logger.Info(ctx, "OnuUpgradeFsm Rx Msg - could not read from channel", log.Fields{"device-id": oFsm.deviceID}) |
| // but then we have to ensure a restart of the FSM as well - as exceptional procedure |
| oFsm.abortOnOmciError(ctx, true) |
| break loop |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm Rx Msg", log.Fields{"device-id": oFsm.deviceID}) |
| |
| switch message.Type { |
| case cmn.TestMsg: |
| msg, _ := message.Data.(cmn.TestMessage) |
| if msg.TestMessageVal == cmn.AbortMessageProcessing { |
| logger.Infow(ctx, "OnuUpgradeFsm abort ProcessMsg", log.Fields{"for device-id": oFsm.deviceID}) |
| break loop |
| } |
| logger.Warnw(ctx, "OnuUpgradeFsm unknown TestMessage", log.Fields{"device-id": oFsm.deviceID, "MessageVal": msg.TestMessageVal}) |
| case cmn.OMCI: |
| msg, _ := message.Data.(cmn.OmciMessage) |
| oFsm.handleOmciOnuUpgradeMessage(ctx, msg) |
| default: |
| logger.Warn(ctx, "OnuUpgradeFsm Rx unknown message", log.Fields{"device-id": oFsm.deviceID, |
| "message.Type": message.Type}) |
| } |
| } |
| logger.Infow(ctx, "End OnuUpgradeFsm Msg processing", log.Fields{"device-id": oFsm.deviceID}) |
| } |
| |
| func (oFsm *OnuUpgradeFsm) handleOmciOnuUpgradeMessage(ctx context.Context, msg cmn.OmciMessage) { |
| logger.Debugw(ctx, "Rx OMCI OnuUpgradeFsm Msg", log.Fields{"device-id": oFsm.deviceID, |
| "msgType": msg.OmciMsg.MessageType}) |
| |
| switch msg.OmciMsg.MessageType { |
| case omci.StartSoftwareDownloadResponseType: |
| { |
| oFsm.handleRxStartSwDownloadResponse(ctx, msg) |
| return |
| } //StartSoftwareDownloadResponseType |
| case omci.DownloadSectionResponseType: |
| { |
| oFsm.handleRxSwSectionResponse(ctx, msg) |
| return |
| } //DownloadSectionResponseType |
| case omci.EndSoftwareDownloadResponseType: |
| { |
| oFsm.handleRxEndSwDownloadResponse(ctx, msg) |
| return |
| } //EndSoftwareDownloadResponseType |
| case omci.ActivateSoftwareResponseType: |
| { |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeActivateSoftwareResponse) |
| if msgLayer == nil { |
| logger.Errorw(ctx, "Omci Msg layer could not be detected for ActivateSw", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.ActivateSoftwareResponse) |
| if !msgOk { |
| logger.Errorw(ctx, "Omci Msg layer could not be assigned for ActivateSw", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm ActivateSwResponse data", log.Fields{ |
| "device-id": oFsm.deviceID, "data-fields": msgObj}) |
| if msgObj.Result != me.Success { |
| logger.Errorw(ctx, "OnuUpgradeFsm ActivateSwResponse result error - later: drive FSM to abort state ?", |
| log.Fields{"device-id": oFsm.deviceID, "Error": msgObj.Result}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| oFsm.mutexUpgradeParams.Lock() |
| if msgObj.EntityInstance == oFsm.InactiveImageMeID { |
| // the image is regarded as active really only after ONU reboot and according indication (ONU down/up procedure) |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Infow(ctx, "Expected ActivateSwResponse received", |
| log.Fields{"device-id": oFsm.deviceID, "commit": oFsm.commitImage}) |
| if oFsm.commitImage { |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvWaitForCommit) |
| } else { |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvActivationDone) // let the FSM wait for external commit request |
| } |
| return |
| } |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm ActivateSwResponse wrong ME instance: abort", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": msgObj.EntityInstance}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } //ActivateSoftwareResponseType |
| case omci.CommitSoftwareResponseType: |
| { |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeCommitSoftwareResponse) |
| if msgLayer == nil { |
| logger.Errorw(ctx, "Omci Msg layer could not be detected for CommitResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.CommitSoftwareResponse) |
| if !msgOk { |
| logger.Errorw(ctx, "Omci Msg layer could not be assigned for CommitResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| if msgObj.Result != me.Success { |
| logger.Errorw(ctx, "OnuUpgradeFsm SwImage CommitResponse result error - later: drive FSM to abort state ?", |
| log.Fields{"device-id": oFsm.deviceID, "Error": msgObj.Result}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| oFsm.mutexUpgradeParams.RLock() |
| if msgObj.EntityInstance == oFsm.InactiveImageMeID { |
| oFsm.mutexUpgradeParams.RUnlock() |
| logger.Debugw(ctx, "OnuUpgradeFsm Expected SwImage CommitResponse received", log.Fields{"device-id": oFsm.deviceID}) |
| //verifying committed image |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvCheckCommitted) |
| return |
| } |
| oFsm.mutexUpgradeParams.RUnlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm SwImage CommitResponse wrong ME instance: abort", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": msgObj.EntityInstance}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } //CommitSoftwareResponseType |
| case omci.GetResponseType: |
| { |
| oFsm.handleRxSwGetResponse(ctx, msg) |
| return |
| } //GetResponseType |
| default: |
| { |
| logger.Errorw(ctx, "Rx OMCI unhandled MsgType", |
| log.Fields{"omciMsgType": msg.OmciMsg.MessageType, "device-id": oFsm.deviceID}) |
| return |
| } |
| } |
| } |
| |
| func (oFsm *OnuUpgradeFsm) handleRxStartSwDownloadResponse(ctx context.Context, msg cmn.OmciMessage) { |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeStartSoftwareDownloadResponse) |
| if msgLayer == nil { |
| logger.Errorw(ctx, "Omci Msg layer could not be detected for StartSwDlResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.StartSoftwareDownloadResponse) |
| if !msgOk { |
| logger.Errorw(ctx, "Omci Msg layer could not be assigned for StartSwDlResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm StartSwDlResponse data", log.Fields{ |
| "device-id": oFsm.deviceID, "data-fields": msgObj}) |
| if msgObj.Result != me.Success { |
| logger.Errorw(ctx, "OnuUpgradeFsm StartSwDlResponse result error - later: drive FSM to abort state ?", |
| log.Fields{"device-id": oFsm.deviceID, "Error": msgObj.Result}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| |
| oFsm.mutexUpgradeParams.Lock() |
| if msgObj.EntityInstance == oFsm.InactiveImageMeID { |
| logger.Debugw(ctx, "Expected StartSwDlResponse received", log.Fields{"device-id": oFsm.deviceID}) |
| if msgObj.WindowSize != oFsm.omciDownloadWindowSizeLimit { |
| // also response WindowSize = 0 is a valid number for used Window size 1 |
| logger.Debugw(ctx, "different StartSwDlResponse window size requested by ONU", log.Fields{ |
| "acceptedOnuWindowSizeLimit": msgObj.WindowSize, "device-id": oFsm.deviceID}) |
| oFsm.omciDownloadWindowSizeLimit = msgObj.WindowSize |
| } |
| oFsm.noOfWindows = oFsm.noOfSections / uint32(oFsm.omciDownloadWindowSizeLimit+1) |
| if oFsm.noOfSections%uint32(oFsm.omciDownloadWindowSizeLimit+1) > 0 { |
| oFsm.noOfWindows++ |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm will use", log.Fields{ |
| "windows": oFsm.noOfWindows, "sections": oFsm.noOfSections, |
| "at WindowSizeLimit": oFsm.omciDownloadWindowSizeLimit}) |
| oFsm.nextDownloadSectionsAbsolute = 0 |
| oFsm.nextDownloadSectionsWindow = 0 |
| oFsm.nextDownloadWindow = 0 |
| |
| oFsm.mutexUpgradeParams.Unlock() |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvRxStartSwDownload) |
| return |
| } |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm StartSwDlResponse wrong ME instance: try again (later)?", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": msgObj.EntityInstance}) |
| oFsm.abortOnOmciError(ctx, false) |
| } //handleRxStartSwDownloadResponse |
| |
| func (oFsm *OnuUpgradeFsm) handleRxSwSectionResponse(ctx context.Context, msg cmn.OmciMessage) { |
| if oFsm.PAdaptFsm == nil { |
| logger.Infow(ctx, "DlSectionResponse received - but FSM not really valid anymore", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| return |
| } |
| if !oFsm.PAdaptFsm.PFsm.Is(UpgradeStVerifyWindow) { |
| //all the processing here is only relevant if the FSM is in state upgradeStVerifyWindow |
| // otherwise this response can be ignored (may stem from a long-processing window send activity, |
| // which is not anymore relevant based on intermediate (cancel) state transitions) |
| logger.Infow(ctx, "DlSectionResponse received - but ignored", log.Fields{ |
| "device-id": oFsm.deviceID, "fsm-state": oFsm.PAdaptFsm.PFsm.Current()}) |
| return |
| } |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeDownloadSectionResponse) |
| if msgLayer == nil { |
| logger.Errorw(ctx, "Omci Msg layer could not be detected for DlSectionResponse", |
| log.Fields{"device-id": oFsm.deviceID, "omci-message": msg.OmciMsg}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.DownloadSectionResponse) |
| if !msgOk { |
| logger.Errorw(ctx, "Omci Msg layer could not be assigned for DlSectionResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm DlSectionResponse Data", log.Fields{ |
| "device-id": oFsm.deviceID, "data-fields": msgObj}) |
| if msgObj.Result != me.Success { |
| logger.Errorw(ctx, "OnuUpgradeFsm DlSectionResponse result error - later: repeat window once?", //TODO!!! |
| log.Fields{"device-id": oFsm.deviceID, "Error": msgObj.Result}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| oFsm.mutexUpgradeParams.Lock() |
| if msgObj.EntityInstance == oFsm.InactiveImageMeID { |
| sectionNumber := msgObj.SectionNumber |
| logger.Infow(ctx, "DlSectionResponse received", log.Fields{ |
| "window section-number": sectionNumber, "window": oFsm.nextDownloadWindow, "device-id": oFsm.deviceID}) |
| |
| oFsm.nextDownloadWindow++ |
| if oFsm.nextDownloadWindow >= oFsm.noOfWindows { |
| if sectionNumber != oFsm.omciDownloadWindowSizeLast { |
| logger.Errorw(ctx, "OnuUpgradeFsm DlSectionResponse section error last window - later: repeat window once?", //TODO!!! |
| log.Fields{"device-id": oFsm.deviceID, "actual section": sectionNumber, |
| "expected section": oFsm.omciDownloadWindowSizeLast}) |
| oFsm.mutexUpgradeParams.Unlock() |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| oFsm.delayEndSwDl = true //ensure a delay for the EndSwDl message |
| //CRC computation for all data bytes of the file |
| imageCRC := crc32a.Checksum(oFsm.imageBuffer[:int(oFsm.origImageLength)]) //store internal for multiple usage |
| //revert the retrieved CRC Byte Order (seems not to deliver NetworkByteOrder) |
| var byteSlice []byte = make([]byte, 4) |
| binary.LittleEndian.PutUint32(byteSlice, uint32(imageCRC)) |
| oFsm.imageCRC = binary.BigEndian.Uint32(byteSlice) |
| oFsm.mutexUpgradeParams.Unlock() |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvEndSwDownload) |
| return |
| } |
| if sectionNumber != oFsm.omciDownloadWindowSizeLimit { |
| logger.Errorw(ctx, "OnuUpgradeFsm DlSectionResponse section error - later: repeat window once?", //TODO!!! |
| log.Fields{"device-id": oFsm.deviceID, "actual-section": sectionNumber, |
| "expected section": oFsm.omciDownloadWindowSizeLimit}) |
| oFsm.mutexUpgradeParams.Unlock() |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| oFsm.nextDownloadSectionsWindow = 0 |
| oFsm.mutexUpgradeParams.Unlock() |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvContinueNextWindow) |
| return |
| } |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm Omci StartSwDlResponse wrong ME instance: try again (later)?", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": msgObj.EntityInstance}) |
| oFsm.abortOnOmciError(ctx, false) |
| } //handleRxSwSectionResponse |
| |
| func (oFsm *OnuUpgradeFsm) handleRxEndSwDownloadResponse(ctx context.Context, msg cmn.OmciMessage) { |
| inAbortingState := oFsm.PAdaptFsm.PFsm.Is(UpgradeStAbortingDL) |
| |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeEndSoftwareDownloadResponse) |
| if msgLayer == nil { |
| logger.Errorw(ctx, "Omci Msg layer could not be detected for EndSwDlResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| if !inAbortingState { |
| oFsm.abortOnOmciError(ctx, false) |
| } //else using error log and wait for another response or 'aborting' state timeout |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.EndSoftwareDownloadResponse) |
| if !msgOk { |
| logger.Errorw(ctx, "Omci Msg layer could not be assigned for EndSwDlResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| if !inAbortingState { |
| oFsm.abortOnOmciError(ctx, false) |
| } //else using error log and wait for another response or 'aborting' state timeout |
| return |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm EndSwDlResponse data", log.Fields{ |
| "device-id": oFsm.deviceID, "data-fields": msgObj}) |
| if msgObj.Result != me.Success { |
| if msgObj.Result == me.DeviceBusy { |
| //ONU indicates it is still processing the image - let the FSM just wait and then repeat the request |
| logger.Debugw(ctx, "OnuUpgradeFsm EndSwDlResponse busy: waiting before sending new request", log.Fields{ |
| "device-id": oFsm.deviceID}) |
| if inAbortingState { |
| //if the EndSwDl was requested from state AbortingDL then use channel to indicate ONU busy/repeat indication |
| oFsm.chReceiveAbortEndSwDlResponse <- cEndSwDlResponseBusy //repeat abort request |
| } |
| return |
| } |
| if inAbortingState { |
| //if the EndSwDl was requested from state AbortingDL and response is error indication |
| // that would be quite strange ONU behavior, no resolution from OnuAdapter, just let the FSM go on to disabled |
| logger.Errorw(ctx, "OnuUpgradeFsm EndSwDlResponse result error - aborting anyway", |
| log.Fields{"device-id": oFsm.deviceID, "Error": msgObj.Result}) |
| oFsm.chReceiveAbortEndSwDlResponse <- cEndSwDlResponseAbort //error indication to stop waiting on EndDownloadResponse(abort) |
| return |
| } |
| //else: ONU rejects the previous download, complete upgrade is immediately aborted with error |
| logger.Errorw(ctx, "OnuUpgradeFsm EndSwDlResponse result error - abort upgrade", |
| log.Fields{"device-id": oFsm.deviceID, "Error": msgObj.Result}) |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.conditionalCancelRequested = false //any conditional cancelRequest is superseded by this abortion |
| oFsm.volthaDownloadReason = voltha.ImageState_CANCELLED_ON_ONU_STATE |
| oFsm.mutexUpgradeParams.Unlock() |
| select { |
| case oFsm.chOnuDlReady <- false: |
| default: |
| } |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| return |
| } |
| oFsm.mutexUpgradeParams.Lock() |
| if msgObj.EntityInstance == oFsm.InactiveImageMeID { |
| logger.Debugw(ctx, "Expected EndSwDlResponse received", log.Fields{"device-id": oFsm.deviceID}) |
| if inAbortingState { |
| oFsm.mutexUpgradeParams.Unlock() |
| //if the EndSwDl was requested from state AbortingDL then use channel to indicate abort acceptance |
| oFsm.chReceiveAbortEndSwDlResponse <- cEndSwDlResponseSuccess //success |
| return |
| } |
| if !oFsm.useAPIVersion43 { |
| //in the older API version the image version check was not possible |
| // - assume new loaded image as valid-inactive immediately |
| oFsm.volthaDownloadState = voltha.ImageState_DOWNLOAD_SUCCEEDED |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_INACTIVE |
| oFsm.mutexUpgradeParams.Unlock() |
| //use non-blocking channel (to be independent from receiver state) to indicate that the download to ONU was successful |
| select { |
| case oFsm.chOnuDlReady <- true: |
| default: |
| } |
| } else { |
| oFsm.mutexUpgradeParams.Unlock() |
| } |
| //use asynchronous channel sending to let the FSM proceed |
| select { |
| case oFsm.chReceiveExpectedResponse <- true: |
| default: |
| } |
| return |
| } |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm StartSwDlResponse wrong ME instance: ignoring", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": msgObj.EntityInstance}) |
| // no state abort in case of unexpected ImageId, just keep waiting for the correct one |
| } //handleRxEndSwDownloadResponse |
| |
| func (oFsm *OnuUpgradeFsm) handleRxSwGetResponse(ctx context.Context, msg cmn.OmciMessage) { |
| msgLayer := (*msg.OmciPacket).Layer(omci.LayerTypeGetResponse) |
| if msgLayer == nil { |
| logger.Errorw(ctx, "Omci Msg layer could not be detected for SwImage GetResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| msgObj, msgOk := msgLayer.(*omci.GetResponse) |
| if !msgOk { |
| logger.Errorw(ctx, "Omci Msg layer could not be assigned for SwImage GetResponse", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm SwImage GetResponse data", log.Fields{ |
| "device-id": oFsm.deviceID, "data-fields": msgObj}) |
| if msgObj.EntityClass == oFsm.pLastTxMeInstance.GetClassID() && |
| msgObj.EntityInstance == oFsm.pLastTxMeInstance.GetEntityID() { |
| if msgObj.Result != me.Success { |
| logger.Errorw(ctx, "OnuUpgradeFsm SwImage GetResponse result error - later: drive FSM to abort state ?", |
| log.Fields{"device-id": oFsm.deviceID, "Error": msgObj.Result}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| } else { |
| logger.Warnw(ctx, "OnuUpgradeFsm SwImage unexpected Entity GetResponse data - ignore", |
| log.Fields{"device-id": oFsm.deviceID}) |
| return |
| } |
| meAttributes := msgObj.Attributes |
| var imageVersion string |
| var imageIsCommitted, imageIsActive uint8 |
| |
| if softwareImageIsCommitted, ok := meAttributes[me.SoftwareImage_IsCommitted]; ok { |
| if softwareImageIsActiveimage, ok := meAttributes[me.SoftwareImage_IsActive]; ok { |
| if softwareImageVersion, ok := meAttributes[me.SoftwareImage_Version]; ok { |
| imageIsCommitted = softwareImageIsCommitted.(uint8) |
| imageIsActive = softwareImageIsActiveimage.(uint8) |
| imageVersion = cmn.TrimStringFromMeOctet(softwareImageVersion) |
| logger.Debugw(ctx, "OnuUpgradeFsm - GetResponse Data for SoftwareImage", |
| log.Fields{"device-id": oFsm.deviceID, "entityID": msgObj.EntityInstance, |
| "version": imageVersion, "isActive": imageIsActive, "isCommitted": imageIsCommitted}) |
| } else { |
| logger.Errorw(ctx, |
| "OnuUpgradeFsm - Not all mandatory attributes present in in SoftwareImage instance - handling stopped!", |
| log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| } |
| } |
| } |
| if oFsm.PAdaptFsm.PFsm.Current() == UpgradeStCheckImageName { |
| //image name check after EndSwDownload, this state (and block) can only be taken if APIVersion43 is used |
| oFsm.verifyOnuSwStatusAfterDownload(ctx, msgObj.EntityInstance, imageVersion, imageIsActive, imageIsCommitted) |
| return |
| } |
| |
| //assumed only relevant state here is upgradeStCheckCommitted |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.conditionalCancelRequested = false //getting here any set (conditional) cancelRequest is not relevant anymore |
| if msgObj.EntityInstance == oFsm.InactiveImageMeID && imageIsActive == cmn.SwIsActive { |
| //a check on the delivered image version is not done, the ONU delivered version might be different from what might have been |
| // indicated in the download image version string (version must be part of the image content itself) |
| // so checking that might be quite unreliable |
| //but with new API this was changed, assumption is that omci image version is known at download request and exactly that is used |
| // in all the API references, so it can and should be checked here now |
| if oFsm.useAPIVersion43 { |
| if imageVersion != oFsm.imageVersion { |
| //new active version indicated on OMCI from ONU is not the expected version |
| logger.Errorw(ctx, "OnuUpgradeFsm image-version not matching the requested upgrade", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": msgObj.EntityInstance, |
| "onu-version": imageVersion, "expected-version": oFsm.imageVersion}) |
| // TODO!!!: error treatment? |
| //TODO!!!: possibly send event information for aborted upgrade (aborted by wrong version)? |
| oFsm.volthaDownloadReason = voltha.ImageState_CANCELLED_ON_ONU_STATE //something like 'UNEXPECTED_VERSION' would be better - proto def |
| oFsm.mutexUpgradeParams.Unlock() |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| return |
| } |
| logger.Debugw(ctx, "OnuUpgradeFsm - expected ONU image version indicated by the ONU", |
| log.Fields{"device-id": oFsm.deviceID}) |
| } |
| if imageIsCommitted == cmn.SwIsCommitted { |
| oFsm.upgradePhase = cUpgradeCommitted |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_COMMITTED |
| //store the new commit flag to onuSwImageIndications (to keep them in sync) |
| oFsm.pDevEntry.ModifySwImageActiveCommit(ctx, imageIsCommitted) |
| logger.Infow(ctx, "requested SW image committed, releasing OnuUpgrade", log.Fields{"device-id": oFsm.deviceID}) |
| //deviceProcStatusUpdate not used anymore, |
| // replaced by transferring the last (more) upgrade state information within removeOnuUpgradeFsm |
| oFsm.mutexUpgradeParams.Unlock() |
| //releasing the upgrade FSM on success |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| return |
| } |
| //if not committed, abort upgrade as failed. There is no implementation here that would trigger this test again |
| } |
| oFsm.volthaDownloadReason = voltha.ImageState_CANCELLED_ON_ONU_STATE |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm SwImage GetResponse indications not matching requested upgrade", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": msgObj.EntityInstance}) |
| // TODO!!!: error treatment? |
| //TODO!!!: possibly send event information for aborted upgrade (aborted by omci processing)?? |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| } //handleRxSwGetResponse |
| |
| func (oFsm *OnuUpgradeFsm) verifyOnuSwStatusAfterDownload(ctx context.Context, aInstanceID uint16, |
| aImageVersion string, aImageIsActive uint8, aImageIsCommitted uint8) { |
| oFsm.mutexUpgradeParams.Lock() |
| if aInstanceID == oFsm.InactiveImageMeID && aImageIsActive == cmn.SwIsInactive && |
| aImageIsCommitted == cmn.SwIsUncommitted { |
| if aImageVersion != oFsm.imageVersion { |
| //new stored inactive version indicated on OMCI from ONU is not the expected version |
| logger.Errorw(ctx, "OnuUpgradeFsm SwImage GetResponse version indication not matching requested upgrade", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": aInstanceID, |
| "onu-version": aImageVersion, "expected-version": oFsm.imageVersion}) |
| //download state is set when entering the reset state |
| oFsm.volthaDownloadReason = voltha.ImageState_CANCELLED_ON_ONU_STATE //something like 'UNEXPECTED_VERSION' would be better - proto def |
| oFsm.mutexUpgradeParams.Unlock() |
| //stop the running ONU download timer |
| //use non-blocking channel (to be independent from receiver state) |
| select { |
| //use channel to indicate that the download response waiting shall be aborted for this device (channel) |
| case oFsm.chOnuDlReady <- false: |
| default: |
| } |
| // TODO!!!: error treatment? |
| //TODO!!!: possibly send event information for aborted upgrade (aborted by wrong version)? |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| return |
| } |
| //with APIVersion43 this is the point to consider the newly loaded image as valid (and inactive) |
| oFsm.upgradePhase = cUpgradeDownloaded |
| oFsm.volthaDownloadState = voltha.ImageState_DOWNLOAD_SUCCEEDED |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_INACTIVE |
| //store the new inactive version to onuSwImageIndications (to keep them in sync) |
| oFsm.pDevEntry.ModifySwImageInactiveVersion(ctx, oFsm.imageVersion) |
| //proceed within upgrade FSM |
| if oFsm.activateImage { |
| //immediate activation requested |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Debugw(ctx, "OnuUpgradeFsm - expected ONU image version indicated by the ONU, continue with activation", |
| log.Fields{"device-id": oFsm.deviceID}) |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvRequestActivate) |
| } else { |
| //have to wait on explicit activation request |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Infow(ctx, "OnuUpgradeFsm - expected ONU image version indicated by the ONU, wait for activate request", |
| log.Fields{"device-id": oFsm.deviceID}) |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvWaitForActivate) |
| } |
| //use non-blocking channel (to be independent from receiver state) |
| select { |
| //use non-blocking channel to indicate that the download to ONU was successful |
| case oFsm.chOnuDlReady <- true: |
| default: |
| } |
| return |
| } |
| //not the expected image/image state |
| oFsm.volthaDownloadReason = voltha.ImageState_CANCELLED_ON_ONU_STATE |
| oFsm.mutexUpgradeParams.Unlock() |
| logger.Errorw(ctx, "OnuUpgradeFsm SwImage GetResponse indications not matching requested upgrade", |
| log.Fields{"device-id": oFsm.deviceID, "ResponseMeId": aInstanceID}) |
| // TODO!!!: error treatment? |
| //TODO!!!: possibly send event information for aborted upgrade (aborted by ONU state indication)? |
| _ = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| } //verifyOnuSwStatusAfterDownload |
| |
| // abortOnOmciError aborts the upgrade processing with evAbort |
| // |
| // asynchronous/synchronous based on parameter aAsync |
| func (oFsm *OnuUpgradeFsm) abortOnOmciError(ctx context.Context, aAsync bool) { |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.conditionalCancelRequested = false //any conditional cancelRequest is superseded by this abortion |
| oFsm.volthaDownloadReason = voltha.ImageState_OMCI_TRANSFER_ERROR |
| oFsm.mutexUpgradeParams.Unlock() |
| //TODO!!!: possibly send event information for aborted upgrade (aborted by omci processing)?? |
| if oFsm.PAdaptFsm != nil { |
| var err error |
| if aAsync { //asynchronous call requested to ensure state transition |
| go func(a_pAFsm *cmn.AdapterFsm) { |
| if a_pAFsm.PFsm != nil { |
| err = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| } |
| }(oFsm.PAdaptFsm) |
| } else { |
| if oFsm.PAdaptFsm.PFsm != nil { |
| err = oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| } |
| } |
| if err != nil { |
| logger.Warnw(ctx, "onu upgrade fsm could not abort on omci error", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err}) |
| } |
| } |
| } |
| |
| // waitOnDownloadToAdapterReady state can only be reached with useAPIVersion43 (usage of pFileManager) |
| // |
| // precondition: mutexIsAwaitingAdapterDlResponse is lockek on call |
| func (oFsm *OnuUpgradeFsm) waitOnDownloadToAdapterReady(ctx context.Context, aSyncChannel chan<- struct{}, |
| aWaitChannel chan bool) { |
| oFsm.mutexIsAwaitingAdapterDlResponse.Lock() |
| downloadToAdapterTimeout := oFsm.pFileManager.GetDownloadTimeout(ctx) |
| oFsm.isWaitingForAdapterDlResponse = true |
| oFsm.mutexIsAwaitingAdapterDlResponse.Unlock() |
| aSyncChannel <- struct{}{} |
| select { |
| // maybe be also some outside cancel (but no context modeled for the moment ...) |
| // case <-ctx.Done(): |
| // logger.Infow("OnuUpgradeFsm-waitOnDownloadToAdapterReady canceled", log.Fields{"for device-id": oFsm.deviceID}) |
| case <-time.After(downloadToAdapterTimeout): //10s should be enough for downloading some image to the adapter |
| logger.Warnw(ctx, "OnuUpgradeFsm Waiting-adapter-download timeout", log.Fields{ |
| "for device-id": oFsm.deviceID, "image-id": oFsm.imageIdentifier, "timeout": downloadToAdapterTimeout}) |
| oFsm.pFileManager.RemoveReadyRequest(ctx, oFsm.imageIdentifier, aWaitChannel) |
| //running into timeout here may still have the download to adapter active -> abort |
| oFsm.pFileManager.CancelDownload(ctx, oFsm.imageIdentifier) |
| oFsm.mutexIsAwaitingAdapterDlResponse.Lock() |
| oFsm.isWaitingForAdapterDlResponse = false |
| oFsm.mutexIsAwaitingAdapterDlResponse.Unlock() |
| oFsm.mutexUpgradeParams.Lock() |
| oFsm.conditionalCancelRequested = false //any conditional cancelRequest is superseded by this abortion |
| oFsm.volthaDownloadReason = voltha.ImageState_UNKNOWN_ERROR //something like 'DOWNLOAD_TO_ADAPTER_TIMEOUT' would be better (proto) |
| oFsm.mutexUpgradeParams.Unlock() |
| //TODO!!!: possibly send event information for aborted upgrade (aborted by omci processing)?? |
| if oFsm.PAdaptFsm != nil && oFsm.PAdaptFsm.PFsm != nil { |
| err := oFsm.PAdaptFsm.PFsm.Event(UpgradeEvAbort) |
| if err != nil { |
| logger.Warnw(ctx, "onu upgrade fsm could not abort on omci error", log.Fields{ |
| "device-id": oFsm.deviceID, "error": err}) |
| } |
| } |
| return |
| |
| case success := <-aWaitChannel: |
| if success { |
| logger.Debugw(ctx, "OnuUpgradeFsm image-downloaded received", log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.mutexIsAwaitingAdapterDlResponse.Lock() |
| oFsm.isWaitingForAdapterDlResponse = false |
| oFsm.mutexIsAwaitingAdapterDlResponse.Unlock() |
| //let the upgrade process proceed |
| pUpgradeFsm := oFsm.PAdaptFsm |
| if pUpgradeFsm != nil { |
| _ = pUpgradeFsm.PFsm.Event(UpgradeEvPrepareSwDownload) |
| } else { |
| logger.Errorw(ctx, "pUpgradeFsm is nil", log.Fields{"device-id": oFsm.deviceID}) |
| } |
| return |
| } |
| // waiting was aborted (assumed here to be caused by |
| // error detection or cancel at download after upgrade FSM reset/abort with according image states set there) |
| logger.Debugw(ctx, "OnuUpgradeFsm Waiting-adapter-download aborted", log.Fields{"device-id": oFsm.deviceID}) |
| oFsm.pFileManager.RemoveReadyRequest(ctx, oFsm.imageIdentifier, aWaitChannel) |
| oFsm.mutexIsAwaitingAdapterDlResponse.Lock() |
| oFsm.isWaitingForAdapterDlResponse = false |
| oFsm.mutexIsAwaitingAdapterDlResponse.Unlock() |
| return |
| } |
| } |
| |
| // waitOnDownloadToOnuReady state can only be reached with useAPIVersion43 (usage of pFileManager) |
| func (oFsm *OnuUpgradeFsm) waitOnDownloadToOnuReady(ctx context.Context, aWaitChannel chan bool) { |
| downloadToOnuTimeout := time.Duration(1+(oFsm.imageLength/0x400000)) * oFsm.downloadToOnuTimeout4MB |
| logger.Debugw(ctx, "OnuUpgradeFsm start download-to-ONU timer", log.Fields{"device-id": oFsm.deviceID, |
| "duration": downloadToOnuTimeout}) |
| select { |
| // maybe be also some outside cancel (but no context modeled for the moment ...) |
| // case <-ctx.Done(): |
| // logger.Infow("OnuUpgradeFsm-waitOnDownloadToOnuReady canceled", log.Fields{"for device-id": oFsm.deviceID}) |
| case <-time.After(downloadToOnuTimeout): //using an image-size depending timout (in minutes) |
| logger.Warnw(ctx, "OnuUpgradeFsm Waiting-ONU-download timeout", log.Fields{ |
| "for device-id": oFsm.deviceID, "image-id": oFsm.imageIdentifier, "timeout": downloadToOnuTimeout}) |
| //the upgrade process has to be aborted |
| oFsm.abortOnOmciError(ctx, false) |
| return |
| |
| case success := <-aWaitChannel: |
| if success { |
| logger.Debugw(ctx, "OnuUpgradeFsm image-downloaded on ONU received", log.Fields{"device-id": oFsm.deviceID}) |
| //all fine, let the FSM proceed like defined from the sender of this event |
| return |
| } |
| // waiting was aborted (assumed here to be caused by |
| // error detection or cancel at download after upgrade FSM reset/abort with according image states set there) |
| logger.Debugw(ctx, "OnuUpgradeFsm Waiting-ONU-download aborted", log.Fields{"device-id": oFsm.deviceID}) |
| return |
| } |
| } |
| |
| // waitOnAbortEndSwDlResponse waits for either abort/success or timeout of EndSwDownload (for abortion) |
| func (oFsm *OnuUpgradeFsm) waitOnAbortEndSwDlResponse(ctx context.Context) { |
| logger.Debugw(ctx, "OnuUpgradeFsm start wait for EndSwDl response (abort)", log.Fields{"device-id": oFsm.deviceID}) |
| select { |
| case <-time.After(oFsm.pOmciCC.GetMaxOmciTimeoutWithRetries() * time.Second): |
| logger.Warnw(ctx, "OnuUpgradeFsm aborting download: timeout - no response received", log.Fields{"device-id": oFsm.deviceID}) |
| pUpgradeFsm := oFsm.PAdaptFsm |
| if pUpgradeFsm != nil { |
| _ = pUpgradeFsm.PFsm.Event(UpgradeEvRestart) |
| } else { |
| logger.Errorw(ctx, "pUpgradeFsm is nil", log.Fields{"device-id": oFsm.deviceID}) |
| } |
| return |
| case response := <-oFsm.chReceiveAbortEndSwDlResponse: |
| logger.Debugw(ctx, "OnuUpgradeFsm aborting download: response received", |
| log.Fields{"device-id": oFsm.deviceID, "response": response}) |
| pUpgradeFsm := oFsm.PAdaptFsm |
| if pUpgradeFsm != nil { |
| if oFsm.abortingDlEvaluateResponse(ctx, pUpgradeFsm, response) { |
| return //event sent from function already |
| } |
| _ = pUpgradeFsm.PFsm.Event(UpgradeEvRestart) |
| } else { |
| logger.Errorw(ctx, "pUpgradeFsm is nil", log.Fields{"device-id": oFsm.deviceID}) |
| } |
| return |
| } //select |
| } |
| |
| // stateUpdateOnReset writes the download and/or image state on entering the reset state according to FSM internal indications |
| func (oFsm *OnuUpgradeFsm) stateUpdateOnReset(ctx context.Context) { |
| oFsm.mutexUpgradeParams.Lock() |
| defer oFsm.mutexUpgradeParams.Unlock() |
| if !oFsm.conditionalCancelRequested { |
| switch oFsm.upgradePhase { |
| case cUpgradeUndefined, cUpgradeDownloading: //coming from downloading |
| //make sure the download state is only changed in case the device has still been downloading |
| if oFsm.volthaDownloadReason == voltha.ImageState_CANCELLED_ON_REQUEST { |
| // indication for termination on request |
| oFsm.volthaDownloadState = voltha.ImageState_DOWNLOAD_CANCELLED |
| } else if oFsm.volthaDownloadReason != voltha.ImageState_NO_ERROR { |
| // indication for termination on failure |
| oFsm.volthaDownloadState = voltha.ImageState_DOWNLOAD_FAILED |
| } |
| //reset the image state from Downloading in this case |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_UNKNOWN //something like 'IMAGE_DOWNLOAD_ABORTED' would be better (proto) |
| //in all other upgrade phases the last set download state remains valid |
| case cUpgradeActivating: |
| //reset the image state from Activating in this case |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_ACTIVATION_ABORTED |
| case cUpgradeCommitting: // indication for request to abort waiting for response |
| //reset the image state from Activating in this case |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_COMMIT_ABORTED |
| //default: in all other upgrade phases keep the last set imageState |
| } //switch |
| } else { |
| //when reaching reset state with conditional cancel that can only result from ONU related problems |
| // (mostly ONU down indication) - derived from resetFsms call |
| // and it can only be related to the downloading-to-ONU phase (no need to check that additionally) |
| oFsm.volthaDownloadState = voltha.ImageState_DOWNLOAD_FAILED |
| oFsm.volthaDownloadReason = voltha.ImageState_CANCELLED_ON_ONU_STATE |
| //reset the image state from Downloading in this case |
| oFsm.volthaImageState = voltha.ImageState_IMAGE_UNKNOWN //something like 'IMAGE_DOWNLOAD_ABORTED' would be better (proto) |
| } |
| } |
| |
| // PrepareForGarbageCollection - remove references to prepare for garbage collection |
| func (oFsm *OnuUpgradeFsm) PrepareForGarbageCollection(ctx context.Context, aDeviceID string) { |
| logger.Debugw(ctx, "prepare for garbage collection", log.Fields{"device-id": aDeviceID}) |
| oFsm.pDeviceHandler = nil |
| oFsm.pDownloadManager = nil |
| oFsm.pFileManager = nil |
| oFsm.pDevEntry = nil |
| oFsm.pOmciCC = nil |
| } |