| /* |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| //Package adaptercoreonu provides the utility for onu devices, flows and statistics |
| package adaptercoreonu |
| |
| import ( |
| "context" |
| "encoding/json" |
| "errors" |
| "fmt" |
| "strconv" |
| "strings" |
| "sync" |
| |
| "github.com/opencord/voltha-lib-go/v3/pkg/db" |
| "github.com/opencord/voltha-lib-go/v3/pkg/db/kvstore" |
| "github.com/opencord/voltha-lib-go/v3/pkg/log" |
| tp "github.com/opencord/voltha-lib-go/v3/pkg/techprofile" |
| ) |
| |
| const cBasePathTechProfileKVStore = "service/voltha/technology_profiles" |
| |
| //definitions for TechProfileProcessing - copied from OltAdapter:openolt_flowmgr.go |
| // could perhaps be defined more globally |
| const ( |
| // binaryStringPrefix is binary string prefix |
| binaryStringPrefix = "0b" |
| // binaryBit1 is binary bit 1 expressed as a character |
| //binaryBit1 = '1' |
| ) |
| |
| type resourceEntry int |
| |
| const ( |
| cResourceGemPort resourceEntry = 1 |
| cResourceTcont resourceEntry = 2 |
| ) |
| |
| type tTechProfileIndication struct { |
| techProfileType string |
| techProfileID uint16 |
| techProfileConfigDone bool |
| techProfileToDelete bool |
| } |
| |
| type tcontParamStruct struct { |
| allocID uint16 |
| schedPolicy uint8 |
| } |
| type gemPortParamStruct struct { |
| //ponOmciCC bool |
| gemPortID uint16 |
| direction uint8 |
| gemPortEncState uint8 |
| prioQueueIndex uint8 |
| pbitString string |
| discardPolicy string |
| //could also be a queue specific parameter, not used that way here |
| //maxQueueSize uint16 |
| queueSchedPolicy string |
| queueWeight uint8 |
| } |
| |
| //refers to one tcont and its properties and all assigned GemPorts and their properties |
| type tcontGemList struct { |
| tcontParams tcontParamStruct |
| mapGemPortParams map[uint16]*gemPortParamStruct |
| } |
| |
| //refers to all tcont and their Tcont/GemPort Parameters |
| type tMapPonAniConfig map[uint16]*tcontGemList |
| |
| //onuUniTechProf structure holds information about the TechProfiles attached to Uni Ports of the ONU |
| type onuUniTechProf struct { |
| baseDeviceHandler *deviceHandler |
| deviceID string |
| tpProcMutex sync.RWMutex |
| techProfileKVStore *db.Backend |
| chTpConfigProcessingStep chan uint8 |
| mapUniTpIndication map[uint8]*tTechProfileIndication //use pointer values to ease assignments to the map |
| mapPonAniConfig map[uint8]*tMapPonAniConfig //per UNI: use pointer values to ease assignments to the map |
| pAniConfigFsm *uniPonAniConfigFsm |
| procResult error //error indication of processing |
| mutexTPState sync.Mutex |
| tpProfileExists bool |
| } |
| |
| //newOnuUniTechProf returns the instance of a OnuUniTechProf |
| //(one instance per ONU/deviceHandler for all possible UNI's) |
| func newOnuUniTechProf(ctx context.Context, aDeviceHandler *deviceHandler) *onuUniTechProf { |
| logger.Infow("init-OnuUniTechProf", log.Fields{"device-id": aDeviceHandler.deviceID}) |
| var onuTP onuUniTechProf |
| onuTP.baseDeviceHandler = aDeviceHandler |
| onuTP.deviceID = aDeviceHandler.deviceID |
| onuTP.tpProcMutex = sync.RWMutex{} |
| onuTP.chTpConfigProcessingStep = make(chan uint8) |
| onuTP.mapUniTpIndication = make(map[uint8]*tTechProfileIndication) |
| onuTP.mapPonAniConfig = make(map[uint8]*tMapPonAniConfig) |
| onuTP.procResult = nil //default assumption processing done with success |
| |
| onuTP.techProfileKVStore = aDeviceHandler.setBackend(cBasePathTechProfileKVStore) |
| if onuTP.techProfileKVStore == nil { |
| logger.Errorw("Can't access techProfileKVStore - no backend connection to service", |
| log.Fields{"device-id": aDeviceHandler.deviceID, "service": cBasePathTechProfileKVStore}) |
| } |
| |
| return &onuTP |
| } |
| |
| // lockTpProcMutex locks OnuUniTechProf processing mutex |
| func (onuTP *onuUniTechProf) lockTpProcMutex() { |
| onuTP.tpProcMutex.Lock() |
| } |
| |
| // unlockTpProcMutex unlocks OnuUniTechProf processing mutex |
| func (onuTP *onuUniTechProf) unlockTpProcMutex() { |
| onuTP.tpProcMutex.Unlock() |
| } |
| |
| // resetTpProcessingErrorIndication resets the internal error indication |
| // need to be called before evaluation of any subsequent processing (given by waitForTpCompletion()) |
| func (onuTP *onuUniTechProf) resetTpProcessingErrorIndication() { |
| onuTP.procResult = nil |
| } |
| |
| func (onuTP *onuUniTechProf) getTpProcessingErrorIndication() error { |
| return onuTP.procResult |
| } |
| |
| // configureUniTp checks existing tp resources to delete and starts the corresponding OMCI configuation of the UNI port |
| // all possibly blocking processing must be run in background to allow for deadline supervision! |
| // but take care on sequential background processing when needed (logical dependencies) |
| // use waitForTimeoutOrCompletion(ctx, chTpConfigProcessingStep, processingStep) for internal synchronization |
| func (onuTP *onuUniTechProf) configureUniTp(ctx context.Context, |
| aUniID uint8, aPathString string, wg *sync.WaitGroup) { |
| defer wg.Done() //always decrement the waitGroup on return |
| logger.Debugw("configure the Uni according to TpPath", log.Fields{ |
| "device-id": onuTP.deviceID, "uni-id": aUniID, "path": aPathString}) |
| |
| if onuTP.techProfileKVStore == nil { |
| logger.Debug("techProfileKVStore not set - abort") |
| onuTP.procResult = errors.New("techProfile config aborted: techProfileKVStore not set") |
| return |
| } |
| |
| //ensure that the given uniID is available (configured) in the UniPort class (used for OMCI entities) |
| var pCurrentUniPort *onuUniPort |
| for _, uniPort := range onuTP.baseDeviceHandler.uniEntityMap { |
| // only if this port is validated for operState transfer |
| if uniPort.uniID == uint8(aUniID) { |
| pCurrentUniPort = uniPort |
| break //found - end search loop |
| } |
| } |
| if pCurrentUniPort == nil { |
| logger.Errorw("TechProfile configuration aborted: requested uniID not found in PortDB", |
| log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID}) |
| onuTP.procResult = fmt.Errorf("techProfile config aborted: requested uniID not found %d on %s", |
| aUniID, onuTP.deviceID) |
| return |
| } |
| |
| var processingStep uint8 = 1 // used to synchronize the different processing steps with chTpConfigProcessingStep |
| |
| //according to updateOnuUniTpPath() logic the assumption here is, that this configuration is only called |
| // in case the KVPath has changed for the given UNI, |
| // as T-Cont and Gem-Id's are dependent on TechProfile-Id this means, that possibly previously existing |
| // (ANI) configuration of this port has to be removed first |
| // (moreover in this case a possibly existing flow configuration is also not valid anymore and needs clean-up as well) |
| // existence of configuration can be detected based on tp stored TCONT's |
| //TODO: |
| /* if tcontMap not empty { |
| go onuTP.deleteAniSideConfig(ctx, aUniID, processingStep) |
| if !onuTP.waitForTimeoutOrCompletion(ctx, chTpConfigProcessingStep, processingStep) { |
| //timeout or error detected |
| return |
| } |
| clear tcontMap |
| } |
| |
| processingStep++ |
| */ |
| go onuTP.readAniSideConfigFromTechProfile(ctx, aUniID, aPathString, processingStep) |
| if !onuTP.waitForTimeoutOrCompletion(ctx, onuTP.chTpConfigProcessingStep, processingStep) { |
| //timeout or error detected |
| if onuTP.tpProfileExists { |
| //ignore the internal error in case the new profile is already configured |
| // and abort the processing here |
| return |
| } |
| logger.Debugw("tech-profile related configuration aborted on read", |
| log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID}) |
| onuTP.procResult = fmt.Errorf("techProfile config aborted: tech-profile read issue for %d on %s", |
| aUniID, onuTP.deviceID) |
| return |
| } |
| |
| processingStep++ |
| if valuePA, existPA := onuTP.mapPonAniConfig[aUniID]; existPA { |
| if _, existTG := (*valuePA)[0]; existTG { |
| //Config data for this uni and and at least TCont Index 0 exist |
| go onuTP.setAniSideConfigFromTechProfile(ctx, aUniID, pCurrentUniPort, processingStep) |
| if !onuTP.waitForTimeoutOrCompletion(ctx, onuTP.chTpConfigProcessingStep, processingStep) { |
| //timeout or error detected |
| logger.Debugw("tech-profile related configuration aborted on set", |
| log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID}) |
| onuTP.procResult = fmt.Errorf("techProfile config aborted: Omci AniSideConfig failed %d on %s", |
| aUniID, onuTP.deviceID) |
| //this issue here means that the AniConfigFsm has not finished successfully |
| //which requires to reset it to allow for new usage, e.g. also on a different UNI |
| //(without that it would be reset on device down indication latest) |
| _ = onuTP.pAniConfigFsm.pAdaptFsm.pFsm.Event(aniEvReset) |
| return |
| } |
| } else { |
| // strange: UNI entry exists, but no ANI data, maybe such situation should be cleared up (if observed) |
| logger.Debugw("no Tcont/Gem data for this UNI found - abort", log.Fields{ |
| "device-id": onuTP.deviceID, "uni-id": aUniID}) |
| onuTP.procResult = fmt.Errorf("techProfile config aborted: no Tcont/Gem data found for this UNI %d on %s", |
| aUniID, onuTP.deviceID) |
| return |
| } |
| } else { |
| logger.Debugw("no PonAni data for this UNI found - abort", log.Fields{ |
| "device-id": onuTP.deviceID, "uni-id": aUniID}) |
| onuTP.procResult = fmt.Errorf("techProfile config aborted: no AniSide data found for this UNI %d on %s", |
| aUniID, onuTP.deviceID) |
| return |
| } |
| } |
| |
| /* internal methods *********************/ |
| |
| func (onuTP *onuUniTechProf) readAniSideConfigFromTechProfile( |
| ctx context.Context, aUniID uint8, aPathString string, aProcessingStep uint8) { |
| var tpInst tp.TechProfile |
| |
| onuTP.tpProfileExists = false |
| //store profile type and identifier for later usage within the OMCI identifier and possibly ME setup |
| //pathstring is defined to be in the form of <ProfType>/<profID>/<Interface/../Identifier> |
| subStringSlice := strings.Split(aPathString, "/") |
| if len(subStringSlice) <= 2 { |
| logger.Errorw("invalid path name format", |
| log.Fields{"path": aPathString, "device-id": onuTP.deviceID}) |
| onuTP.chTpConfigProcessingStep <- 0 //error indication |
| return |
| } |
| profID, err := strconv.ParseUint(subStringSlice[1], 10, 32) |
| if err != nil { |
| logger.Errorw("invalid ProfileId from path", |
| log.Fields{"ParseErr": err}) |
| onuTP.chTpConfigProcessingStep <- 0 //error indication |
| return |
| } |
| |
| //at this point it is assumed that a new TechProfile is assigned to the UNI |
| //expectation is that no TPIndication entry exists here, if exists and with the same TPId |
| // then we throw a warning, set an internal error and abort with error, |
| // which is later re-defined to success response to OLT adapter |
| // if TPId has changed, current data is removed (note that the ONU config state may be |
| // ambivalent in such a case) |
| if _, existTP := onuTP.mapUniTpIndication[aUniID]; existTP { |
| logger.Warnw("Some active profile entry at reading new TechProfile", |
| log.Fields{"path": aPathString, "device-id": onuTP.deviceID, |
| "uni-id": aUniID, "wrongProfile": onuTP.mapUniTpIndication[aUniID].techProfileID}) |
| if uint16(profID) == onuTP.mapUniTpIndication[aUniID].techProfileID { |
| // ProfId not changed - assume profile to be still the same |
| // anyway this should not appear after full support of profile (Gem/TCont) removal |
| logger.Warnw("New TechProfile already exists - aborting configuration", |
| log.Fields{"device-id": onuTP.deviceID}) |
| onuTP.tpProfileExists = true |
| onuTP.chTpConfigProcessingStep <- 0 //error indication |
| return |
| } |
| //delete on the mapUniTpIndication map not needed, just overwritten later |
| //delete on the PonAniConfig map should be safe, even if not existing |
| delete(onuTP.mapPonAniConfig, aUniID) |
| } else { |
| // this is normal processing |
| onuTP.mapUniTpIndication[aUniID] = &tTechProfileIndication{} //need to assign some (empty) struct memory first! |
| } |
| |
| onuTP.mapUniTpIndication[aUniID].techProfileType = subStringSlice[0] |
| //note the limitation on ID range (probably even more limited) - based on usage within OMCI EntityID |
| onuTP.mapUniTpIndication[aUniID].techProfileID = uint16(profID) |
| onuTP.mapUniTpIndication[aUniID].techProfileConfigDone = false |
| onuTP.mapUniTpIndication[aUniID].techProfileToDelete = false |
| logger.Debugw("tech-profile path indications", |
| log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID, |
| "profType": onuTP.mapUniTpIndication[aUniID].techProfileType, |
| "profID": onuTP.mapUniTpIndication[aUniID].techProfileID}) |
| |
| Value, err := onuTP.techProfileKVStore.Get(ctx, aPathString) |
| if err == nil { |
| if Value != nil { |
| logger.Debugw("tech-profile read", |
| log.Fields{"Key": Value.Key, "device-id": onuTP.deviceID}) |
| tpTmpBytes, _ := kvstore.ToByte(Value.Value) |
| |
| if err = json.Unmarshal(tpTmpBytes, &tpInst); err != nil { |
| logger.Errorw("TechProf - Failed to unmarshal tech-profile into tpInst", |
| log.Fields{"error": err, "device-id": onuTP.deviceID}) |
| onuTP.chTpConfigProcessingStep <- 0 //error indication |
| return |
| } |
| logger.Debugw("TechProf - tpInst", log.Fields{"tpInst": tpInst}) |
| // access examples |
| logger.Debugw("TechProf content", log.Fields{"Name": tpInst.Name, |
| "MaxGemPayloadSize": tpInst.InstanceCtrl.MaxGemPayloadSize, |
| "DownstreamGemDiscardmaxThreshold": tpInst.DownstreamGemPortAttributeList[0].DiscardConfig.MaxThreshold}) |
| } else { |
| logger.Errorw("No tech-profile found", |
| log.Fields{"path": aPathString, "device-id": onuTP.deviceID}) |
| onuTP.chTpConfigProcessingStep <- 0 //error indication |
| return |
| } |
| } else { |
| logger.Errorw("kvstore-get failed for path", |
| log.Fields{"path": aPathString, "device-id": onuTP.deviceID}) |
| onuTP.chTpConfigProcessingStep <- 0 //error indication |
| return |
| } |
| |
| //default start with 1Tcont profile, later perhaps extend to MultiTcontMultiGem |
| localMapGemPortParams := make(map[uint16]*gemPortParamStruct) |
| localMapGemPortParams[0] = &gemPortParamStruct{} |
| localMapPonAniConfig := make(map[uint16]*tcontGemList) |
| localMapPonAniConfig[0] = &tcontGemList{tcontParamStruct{}, localMapGemPortParams} |
| onuTP.mapPonAniConfig[aUniID] = (*tMapPonAniConfig)(&localMapPonAniConfig) |
| |
| //note: the code is currently restricted to one TCcont per Onu (index [0]) |
| //get the relevant values from the profile and store to mapPonAniConfig |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].tcontParams.allocID = uint16(tpInst.UsScheduler.AllocID) |
| //maybe tCont scheduling not (yet) needed - just to basically have it for future |
| // (would only be relevant in case of ONU-2G QOS configuration flexibility) |
| if tpInst.UsScheduler.QSchedPolicy == "StrictPrio" { |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].tcontParams.schedPolicy = 1 //for the moment fixed value acc. G.988 //TODO: defines! |
| } else { |
| //default profile defines "Hybrid" - which probably comes down to WRR with some weigthts for SP |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].tcontParams.schedPolicy = 2 //for G.988 WRR |
| } |
| loNumGemPorts := tpInst.NumGemPorts |
| loGemPortRead := false |
| for pos, content := range tpInst.UpstreamGemPortAttributeList { |
| if uint32(pos) == loNumGemPorts { |
| logger.Debugw("PonAniConfig abort GemPortList - GemList exceeds set NumberOfGemPorts", |
| log.Fields{"device-id": onuTP.deviceID, "index": pos, "NumGem": loNumGemPorts}) |
| break |
| } |
| if pos == 0 { |
| //at least one upstream GemPort should always exist (else traffic profile makes no sense) |
| loGemPortRead = true |
| } else { |
| //for all further GemPorts we need to extend the mapGemPortParams |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)] = &gemPortParamStruct{} |
| } |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].gemPortID = |
| uint16(content.GemportID) |
| //direction can be correlated later with Downstream list, |
| // for now just assume bidirectional (upstream never exists alone) |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].direction = 3 //as defined in G.988 |
| // expected Prio-Queue values 0..7 with 7 for highest PrioQueue, QueueIndex=Prio = 0..7 |
| if 7 < content.PriorityQueue { |
| logger.Errorw("PonAniConfig reject on GemPortList - PrioQueue value invalid", |
| log.Fields{"device-id": onuTP.deviceID, "index": pos, "PrioQueue": content.PriorityQueue}) |
| //remove PonAniConfig as done so far, delete map should be safe, even if not existing |
| delete(onuTP.mapPonAniConfig, aUniID) |
| onuTP.chTpConfigProcessingStep <- 0 //error indication |
| return |
| } |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].prioQueueIndex = |
| uint8(content.PriorityQueue) |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].pbitString = |
| strings.TrimPrefix(content.PbitMap, binaryStringPrefix) |
| if content.AesEncryption == "True" { |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].gemPortEncState = 1 |
| } else { |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].gemPortEncState = 0 |
| } |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].discardPolicy = |
| content.DiscardPolicy |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].queueSchedPolicy = |
| content.SchedulingPolicy |
| //'GemWeight' looks strange in default profile, for now we just copy the weight to first queue |
| (*(onuTP.mapPonAniConfig[aUniID]))[0].mapGemPortParams[uint16(pos)].queueWeight = |
| uint8(content.Weight) |
| } |
| if !loGemPortRead { |
| logger.Errorw("PonAniConfig reject - no GemPort could be read from TechProfile", |
| log.Fields{"path": aPathString, "device-id": onuTP.deviceID}) |
| //remove PonAniConfig as done so far, delete map should be safe, even if not existing |
| delete(onuTP.mapPonAniConfig, aUniID) |
| onuTP.chTpConfigProcessingStep <- 0 //error indication |
| return |
| } |
| //TODO!! MC (downstream) GemPorts can be set using DownstreamGemPortAttributeList separately |
| |
| //logger does not simply output the given structures, just give some example debug values |
| logger.Debugw("PonAniConfig read from TechProfile", log.Fields{ |
| "device-id": onuTP.deviceID, |
| "AllocId": (*(onuTP.mapPonAniConfig[aUniID]))[0].tcontParams.allocID}) |
| for gemIndex, gemEntry := range (*(onuTP.mapPonAniConfig[0]))[0].mapGemPortParams { |
| logger.Debugw("PonAniConfig read from TechProfile", log.Fields{ |
| "GemIndex": gemIndex, |
| "GemPort": gemEntry.gemPortID, |
| "QueueScheduling": gemEntry.queueSchedPolicy}) |
| } |
| |
| onuTP.chTpConfigProcessingStep <- aProcessingStep //done |
| } |
| |
| func (onuTP *onuUniTechProf) setAniSideConfigFromTechProfile( |
| ctx context.Context, aUniID uint8, apCurrentUniPort *onuUniPort, aProcessingStep uint8) { |
| |
| //OMCI transfer of ANI data acc. to mapPonAniConfig |
| // also the FSM's are running in background, |
| // hence we have to make sure they indicate 'success' success on chTpConfigProcessingStep with aProcessingStep |
| if onuTP.pAniConfigFsm == nil { |
| onuTP.createAniConfigFsm(aUniID, apCurrentUniPort, OmciAniConfigDone, aProcessingStep) |
| } else { //AniConfigFsm already init |
| onuTP.runAniConfigFsm(aProcessingStep) |
| } |
| } |
| |
| func (onuTP *onuUniTechProf) waitForTimeoutOrCompletion( |
| ctx context.Context, aChTpProcessingStep <-chan uint8, aProcessingStep uint8) bool { |
| select { |
| case <-ctx.Done(): |
| logger.Warnw("processing not completed in-time: force release of TpProcMutex!", |
| log.Fields{"device-id": onuTP.deviceID, "error": ctx.Err()}) |
| return false |
| case rxStep := <-aChTpProcessingStep: |
| if rxStep == aProcessingStep { |
| return true |
| } |
| //all other values are not accepted - including 0 for error indication |
| logger.Warnw("Invalid processing step received: abort and force release of TpProcMutex!", |
| log.Fields{"device-id": onuTP.deviceID, |
| "wantedStep": aProcessingStep, "haveStep": rxStep}) |
| return false |
| } |
| } |
| |
| // createUniLockFsm initializes and runs the AniConfig FSM to transfer the OMCI related commands for ANI side configuration |
| func (onuTP *onuUniTechProf) createAniConfigFsm(aUniID uint8, |
| apCurrentUniPort *onuUniPort, devEvent OnuDeviceEvent, aProcessingStep uint8) { |
| logger.Debugw("createAniConfigFsm", log.Fields{"device-id": onuTP.deviceID}) |
| chAniConfigFsm := make(chan Message, 2048) |
| pDevEntry := onuTP.baseDeviceHandler.getOnuDeviceEntry(true) |
| if pDevEntry == nil { |
| logger.Errorw("No valid OnuDevice - aborting", log.Fields{"device-id": onuTP.deviceID}) |
| return |
| } |
| pAniCfgFsm := newUniPonAniConfigFsm(pDevEntry.PDevOmciCC, apCurrentUniPort, onuTP, |
| pDevEntry.pOnuDB, onuTP.mapUniTpIndication[aUniID].techProfileID, devEvent, |
| "AniConfigFsm", onuTP.baseDeviceHandler, chAniConfigFsm) |
| if pAniCfgFsm != nil { |
| onuTP.pAniConfigFsm = pAniCfgFsm |
| onuTP.runAniConfigFsm(aProcessingStep) |
| } else { |
| logger.Errorw("AniConfigFSM could not be created - abort!!", log.Fields{"device-id": onuTP.deviceID}) |
| } |
| } |
| |
| // deleteTpResource removes Resources from the ONU's specified Uni |
| func (onuTP *onuUniTechProf) deleteTpResource(ctx context.Context, |
| aUniID uint8, aPathString string, aResource resourceEntry, aEntryID uint32, |
| wg *sync.WaitGroup) { |
| defer wg.Done() |
| logger.Debugw("this would remove TP resources from ONU's UNI", log.Fields{ |
| "device-id": onuTP.deviceID, "uniID": aUniID, "path": aPathString, "Resource": aResource}) |
| if cResourceGemPort == aResource { |
| logger.Debugw("remove GemPort from the list of existing ones of the TP", log.Fields{ |
| "device-id": onuTP.deviceID, "uniID": aUniID, "path": aPathString, "entry": aEntryID}) |
| // check if the requested GemPort exists in the DB |
| // check that the TpConfigRequest was done |
| // initiate OMCI GemPort related removal |
| // remove GemPort from config DB |
| // dev reason update? (for the moment not yet done here!) |
| } else { //if cResourceTcont == aResource { |
| //the TechProfile indicated by path is considered for removal |
| // by now we do not clear the OMCI related configuration (to be done later) |
| // so we use this position here just to remove the internal stored profile data |
| // (needed for checking the existence of the TechProfile after some profile delete) |
| // at the oment we only admit 1 TechProfile (T-Cont), so by now we can just remove the only existing TechProfile |
| // TODO: To be updated with multi-T-Cont implementation |
| logger.Debugw("DeleteTcont clears the existing internal profile", log.Fields{ |
| "device-id": onuTP.deviceID, "uniID": aUniID, "path": aPathString, "Resource": aResource}) |
| onuTP.clearAniSideConfig(aUniID) |
| // reset also the FSM in order to admit a new OMCI configuration in case a new profile is created |
| // FSM stop maybe encapsulated as OnuTP method - perhaps later in context of module splitting |
| if onuTP.pAniConfigFsm != nil { |
| _ = onuTP.pAniConfigFsm.pAdaptFsm.pFsm.Event(aniEvReset) |
| } |
| |
| //TODO!!! - the real processing could look like that (for starting the removal, where the clearAniSideConfig is done implicitly): |
| //delete the given resource from ONU OMCI config and data base - as background routine |
| /* |
| var processingStep uint8 = 1 // used to synchronize the different processing steps with chTpConfigProcessingStep |
| go onuTp.deleteAniResource(ctx, processingStep) |
| if !onuTP.waitForTimeoutOrCompletion(ctx, chTpConfigProcessingStep, processingStep) { |
| //timeout or error detected |
| return |
| } |
| */ |
| } |
| //if implemented, the called FSM would generate an adequate event if config has been done, |
| // by now we just stimulate this event here as 'done' - TODO!!: to be removed after full implementation |
| go onuTP.baseDeviceHandler.deviceProcStatusUpdate(OmciAniResourceRemoved) |
| } |
| |
| // runAniConfigFsm starts the AniConfig FSM to transfer the OMCI related commands for ANI side configuration |
| func (onuTP *onuUniTechProf) runAniConfigFsm(aProcessingStep uint8) { |
| /* Uni related ANI config procedure - |
| ***** should run via 'aniConfigDone' state and generate the argument requested event ***** |
| */ |
| pACStatemachine := onuTP.pAniConfigFsm.pAdaptFsm.pFsm |
| if pACStatemachine != nil { |
| if pACStatemachine.Is(aniStDisabled) { |
| //FSM init requirement to get informed abou FSM completion! (otherwise timeout of the TechProf config) |
| onuTP.pAniConfigFsm.setFsmCompleteChannel(onuTP.chTpConfigProcessingStep, aProcessingStep) |
| if err := pACStatemachine.Event(aniEvStart); err != nil { |
| logger.Warnw("AniConfigFSM: can't start", log.Fields{"err": err}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } else { |
| /***** AniConfigFSM started */ |
| logger.Debugw("AniConfigFSM started", log.Fields{ |
| "state": pACStatemachine.Current(), "device-id": onuTP.deviceID}) |
| } |
| } else { |
| logger.Warnw("wrong state of AniConfigFSM - want: disabled", log.Fields{ |
| "have": pACStatemachine.Current(), "device-id": onuTP.deviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } |
| } else { |
| logger.Errorw("AniConfigFSM StateMachine invalid - cannot be executed!!", log.Fields{"device-id": onuTP.deviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } |
| } |
| |
| // clearAniSideConfig deletes all internal TechProfile related data connected to the requested UniPort |
| func (onuTP *onuUniTechProf) clearAniSideConfig(aUniID uint8) { |
| logger.Debugw("removing TpIndication and PonAniConfig data", log.Fields{ |
| "device-id": onuTP.deviceID, "uni-id": aUniID}) |
| //a mutex protection on the concerned data should not be needed here, as the config/write action should not |
| // interfere with any read action or the initial write/config activity at start |
| //remove the TechProfile indications of this UNI, should be safe even if not existing |
| delete(onuTP.mapUniTpIndication, aUniID) |
| //delete on the PonAniConfig map of this UNI should be safe, even if not existing |
| delete(onuTP.mapPonAniConfig, aUniID) |
| } |
| |
| // setConfigDone sets the requested techProfile config state (if possible) |
| func (onuTP *onuUniTechProf) setConfigDone(aUniID uint8, aState bool) { |
| if _, existTP := onuTP.mapUniTpIndication[aUniID]; existTP { |
| onuTP.mutexTPState.Lock() |
| onuTP.mapUniTpIndication[aUniID].techProfileConfigDone = aState |
| onuTP.mutexTPState.Unlock() |
| } //else: the state is just ignored (does not exist) |
| } |
| |
| // getTechProfileDone checks if the Techprofile processing with the requested TechProfile ID was done |
| func (onuTP *onuUniTechProf) getTechProfileDone(aUniID uint8, aTpID uint16) bool { |
| if _, existTP := onuTP.mapUniTpIndication[aUniID]; existTP { |
| if onuTP.mapUniTpIndication[aUniID].techProfileID == aTpID { |
| onuTP.mutexTPState.Lock() |
| defer onuTP.mutexTPState.Unlock() |
| if onuTP.mapUniTpIndication[aUniID].techProfileToDelete { |
| logger.Debugw("TechProfile not relevant for requested flow config - waiting on delete", |
| log.Fields{"device-id": onuTP.deviceID, "uni-id": aUniID}) |
| return false //still waiting for removal of this techProfile first |
| } |
| return onuTP.mapUniTpIndication[aUniID].techProfileConfigDone |
| } |
| } |
| //for all other constellations indicate false = Config not done |
| return false |
| } |
| |
| // setProfileToDelete sets the requested techProfile toDelete state (if possible) |
| func (onuTP *onuUniTechProf) setProfileToDelete(aUniID uint8, aState bool) { |
| if _, existTP := onuTP.mapUniTpIndication[aUniID]; existTP { |
| onuTP.mutexTPState.Lock() |
| onuTP.mapUniTpIndication[aUniID].techProfileToDelete = aState |
| onuTP.mutexTPState.Unlock() |
| } //else: the state is just ignored (does not exist) |
| } |