| /* |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| //Package adaptercoreonu provides the utility for onu devices, flows and statistics |
| package adaptercoreonu |
| |
| import ( |
| "context" |
| "encoding/hex" |
| "errors" |
| "fmt" |
| "strconv" |
| "strings" |
| "sync" |
| "time" |
| |
| "github.com/gogo/protobuf/proto" |
| "github.com/golang/protobuf/ptypes" |
| "github.com/looplab/fsm" |
| me "github.com/opencord/omci-lib-go/generated" |
| "github.com/opencord/voltha-lib-go/v3/pkg/adapters/adapterif" |
| "github.com/opencord/voltha-lib-go/v3/pkg/log" |
| vc "github.com/opencord/voltha-protos/v3/go/common" |
| ic "github.com/opencord/voltha-protos/v3/go/inter_container" |
| of "github.com/opencord/voltha-protos/v3/go/openflow_13" |
| oop "github.com/opencord/voltha-protos/v3/go/openolt" |
| "github.com/opencord/voltha-protos/v3/go/voltha" |
| ) |
| |
| /* |
| // Constants for number of retries and for timeout |
| const ( |
| MaxRetry = 10 |
| MaxTimeOutInMs = 500 |
| ) |
| */ |
| |
| //Event category and subcategory definitions - same as defiend for OLT in eventmgr.go - should be done more centrally |
| const ( |
| pon = voltha.EventSubCategory_PON |
| olt = voltha.EventSubCategory_OLT |
| ont = voltha.EventSubCategory_ONT |
| onu = voltha.EventSubCategory_ONU |
| nni = voltha.EventSubCategory_NNI |
| service = voltha.EventCategory_SERVICE |
| security = voltha.EventCategory_SECURITY |
| equipment = voltha.EventCategory_EQUIPMENT |
| processing = voltha.EventCategory_PROCESSING |
| environment = voltha.EventCategory_ENVIRONMENT |
| communication = voltha.EventCategory_COMMUNICATION |
| ) |
| |
| const ( |
| cEventObjectType = "ONU" |
| ) |
| const ( |
| cOnuActivatedEvent = "ONU_ACTIVATED" |
| ) |
| |
| //DeviceHandler will interact with the ONU ? device. |
| type DeviceHandler struct { |
| deviceID string |
| DeviceType string |
| adminState string |
| device *voltha.Device |
| logicalDeviceID string |
| ProxyAddressID string |
| ProxyAddressType string |
| parentId string |
| ponPortNumber uint32 |
| |
| coreProxy adapterif.CoreProxy |
| AdapterProxy adapterif.AdapterProxy |
| EventProxy adapterif.EventProxy |
| pOpenOnuAc *OpenONUAC |
| pDeviceStateFsm *fsm.FSM |
| pPonPort *voltha.Port |
| pOnuOmciDevice *OnuDeviceEntry |
| exitChannel chan int |
| lockDevice sync.RWMutex |
| pOnuIndication *oop.OnuIndication |
| pLockStateFsm *LockStateFsm |
| pUnlockStateFsm *LockStateFsm |
| |
| //flowMgr *OpenOltFlowMgr |
| //eventMgr *OpenOltEventMgr |
| //resourceMgr *rsrcMgr.OpenOltResourceMgr |
| |
| //discOnus sync.Map |
| //onus sync.Map |
| //portStats *OpenOltStatisticsMgr |
| //metrics *pmmetrics.PmMetrics |
| stopCollector chan bool |
| stopHeartbeatCheck chan bool |
| activePorts sync.Map |
| uniEntityMap map[uint32]*OnuUniPort |
| } |
| |
| //NewDeviceHandler creates a new device handler |
| func NewDeviceHandler(cp adapterif.CoreProxy, ap adapterif.AdapterProxy, ep adapterif.EventProxy, device *voltha.Device, adapter *OpenONUAC) *DeviceHandler { |
| var dh DeviceHandler |
| dh.coreProxy = cp |
| dh.AdapterProxy = ap |
| dh.EventProxy = ep |
| cloned := (proto.Clone(device)).(*voltha.Device) |
| dh.deviceID = cloned.Id |
| dh.DeviceType = cloned.Type |
| dh.adminState = "up" |
| dh.device = cloned |
| dh.pOpenOnuAc = adapter |
| dh.exitChannel = make(chan int, 1) |
| dh.lockDevice = sync.RWMutex{} |
| dh.stopCollector = make(chan bool, 2) |
| dh.stopHeartbeatCheck = make(chan bool, 2) |
| //dh.metrics = pmmetrics.NewPmMetrics(cloned.Id, pmmetrics.Frequency(150), pmmetrics.FrequencyOverride(false), pmmetrics.Grouped(false), pmmetrics.Metrics(pmNames)) |
| dh.activePorts = sync.Map{} |
| //TODO initialize the support classes. |
| dh.uniEntityMap = make(map[uint32]*OnuUniPort) |
| |
| // Device related state machine |
| dh.pDeviceStateFsm = fsm.NewFSM( |
| "null", |
| fsm.Events{ |
| {Name: "DeviceInit", Src: []string{"null", "down"}, Dst: "init"}, |
| {Name: "GrpcConnected", Src: []string{"init"}, Dst: "connected"}, |
| {Name: "GrpcDisconnected", Src: []string{"connected", "down"}, Dst: "init"}, |
| {Name: "DeviceUpInd", Src: []string{"connected", "down"}, Dst: "up"}, |
| {Name: "DeviceDownInd", Src: []string{"up"}, Dst: "down"}, |
| }, |
| fsm.Callbacks{ |
| "before_event": func(e *fsm.Event) { dh.logStateChange(e) }, |
| "before_DeviceInit": func(e *fsm.Event) { dh.doStateInit(e) }, |
| "after_DeviceInit": func(e *fsm.Event) { dh.postInit(e) }, |
| "before_GrpcConnected": func(e *fsm.Event) { dh.doStateConnected(e) }, |
| "before_GrpcDisconnected": func(e *fsm.Event) { dh.doStateInit(e) }, |
| "after_GrpcDisconnected": func(e *fsm.Event) { dh.postInit(e) }, |
| "before_DeviceUpInd": func(e *fsm.Event) { dh.doStateUp(e) }, |
| "before_DeviceDownInd": func(e *fsm.Event) { dh.doStateDown(e) }, |
| }, |
| ) |
| return &dh |
| } |
| |
| // start save the device to the data model |
| func (dh *DeviceHandler) Start(ctx context.Context) { |
| logger.Debugw("starting-device-handler", log.Fields{"device": dh.device, "deviceId": dh.deviceID}) |
| // Add the initial device to the local model |
| logger.Debug("device-handler-started") |
| } |
| |
| // stop stops the device dh. Not much to do for now |
| func (dh *DeviceHandler) stop(ctx context.Context) { |
| logger.Debug("stopping-device-handler") |
| dh.exitChannel <- 1 |
| } |
| |
| // ########################################################################################## |
| // DeviceHandler methods that implement the adapters interface requests ##### begin ######### |
| |
| //AdoptDevice adopts the OLT device |
| func (dh *DeviceHandler) AdoptDevice(ctx context.Context, device *voltha.Device) { |
| logger.Debugw("Adopt_device", log.Fields{"deviceID": device.Id, "Address": device.GetHostAndPort()}) |
| |
| logger.Debugw("Device FSM: ", log.Fields{"state": string(dh.pDeviceStateFsm.Current())}) |
| if dh.pDeviceStateFsm.Is("null") { |
| if err := dh.pDeviceStateFsm.Event("DeviceInit"); err != nil { |
| logger.Errorw("Device FSM: Can't go to state DeviceInit", log.Fields{"err": err}) |
| } |
| logger.Debugw("Device FSM: ", log.Fields{"state": string(dh.pDeviceStateFsm.Current())}) |
| } else { |
| logger.Debug("AdoptDevice: Agent/device init already done") |
| } |
| |
| /* |
| // Now, set the initial PM configuration for that device |
| if err := dh.coreProxy.DevicePMConfigUpdate(nil, dh.metrics.ToPmConfigs()); err != nil { |
| logger.Errorw("error-updating-PMs", log.Fields{"deviceId": device.Id, "error": err}) |
| } |
| |
| go startCollector(dh) |
| go startHeartbeatCheck(dh) |
| */ |
| } |
| |
| //ProcessInterAdapterMessage sends the proxied messages to the target device |
| // If the proxy address is not found in the unmarshalled message, it first fetches the onu device for which the message |
| // is meant, and then send the unmarshalled omci message to this onu |
| func (dh *DeviceHandler) ProcessInterAdapterMessage(msg *ic.InterAdapterMessage) error { |
| msgID := msg.Header.Id |
| msgType := msg.Header.Type |
| fromTopic := msg.Header.FromTopic |
| toTopic := msg.Header.ToTopic |
| toDeviceID := msg.Header.ToDeviceId |
| proxyDeviceID := msg.Header.ProxyDeviceId |
| logger.Debugw("InterAdapter message header", log.Fields{"msgID": msgID, "msgType": msgType, |
| "fromTopic": fromTopic, "toTopic": toTopic, "toDeviceID": toDeviceID, "proxyDeviceID": proxyDeviceID}) |
| |
| switch msgType { |
| case ic.InterAdapterMessageType_OMCI_REQUEST: |
| { |
| msgBody := msg.GetBody() |
| omciMsg := &ic.InterAdapterOmciMessage{} |
| if err := ptypes.UnmarshalAny(msgBody, omciMsg); err != nil { |
| logger.Warnw("cannot-unmarshal-omci-msg-body", log.Fields{"error": err}) |
| return err |
| } |
| |
| //assuming omci message content is hex coded! |
| // with restricted output of 16(?) bytes would be ...omciMsg.Message[:16] |
| logger.Debugw("inter-adapter-recv-omci", |
| log.Fields{"RxOmciMessage": hex.EncodeToString(omciMsg.Message)}) |
| //receive_message(omci_msg.message) |
| return dh.GetOnuDeviceEntry().PDevOmciCC.ReceiveMessage(context.TODO(), omciMsg.Message) |
| } |
| case ic.InterAdapterMessageType_ONU_IND_REQUEST: |
| { |
| msgBody := msg.GetBody() |
| onu_indication := &oop.OnuIndication{} |
| if err := ptypes.UnmarshalAny(msgBody, onu_indication); err != nil { |
| logger.Warnw("cannot-unmarshal-onu-indication-msg-body", log.Fields{"error": err}) |
| return err |
| } |
| |
| onu_operstate := onu_indication.GetOperState() |
| logger.Debugw("inter-adapter-recv-onu-ind", log.Fields{"OnuId": onu_indication.GetOnuId(), |
| "AdminState": onu_indication.GetAdminState(), "OperState": onu_operstate, |
| "SNR": onu_indication.GetSerialNumber()}) |
| |
| //interface related functioons might be error checked .... |
| if onu_operstate == "up" { |
| dh.create_interface(onu_indication) |
| } else if (onu_operstate == "down") || (onu_operstate == "unreachable") { |
| dh.update_interface(onu_indication) |
| } else { |
| logger.Errorw("unknown-onu-indication operState", log.Fields{"OnuId": onu_indication.GetOnuId()}) |
| return errors.New("InvalidOperState") |
| } |
| } |
| default: |
| { |
| logger.Errorw("inter-adapter-unhandled-type", log.Fields{"msgType": msg.Header.Type}) |
| return errors.New("unimplemented") |
| } |
| } |
| |
| /* form py code: |
| elif request.header.type == InterAdapterMessageType.TECH_PROFILE_DOWNLOAD_REQUEST: |
| tech_msg = InterAdapterTechProfileDownloadMessage() |
| request.body.Unpack(tech_msg) |
| self.logger.debug('inter-adapter-recv-tech-profile', tech_msg=tech_msg) |
| |
| self.load_and_configure_tech_profile(tech_msg.uni_id, tech_msg.path) |
| |
| elif request.header.type == InterAdapterMessageType.DELETE_GEM_PORT_REQUEST: |
| del_gem_msg = InterAdapterDeleteGemPortMessage() |
| request.body.Unpack(del_gem_msg) |
| self.logger.debug('inter-adapter-recv-del-gem', gem_del_msg=del_gem_msg) |
| |
| self.delete_tech_profile(uni_id=del_gem_msg.uni_id, |
| gem_port_id=del_gem_msg.gem_port_id, |
| tp_path=del_gem_msg.tp_path) |
| |
| elif request.header.type == InterAdapterMessageType.DELETE_TCONT_REQUEST: |
| del_tcont_msg = InterAdapterDeleteTcontMessage() |
| request.body.Unpack(del_tcont_msg) |
| self.logger.debug('inter-adapter-recv-del-tcont', del_tcont_msg=del_tcont_msg) |
| |
| self.delete_tech_profile(uni_id=del_tcont_msg.uni_id, |
| alloc_id=del_tcont_msg.alloc_id, |
| tp_path=del_tcont_msg.tp_path) |
| else: |
| self.logger.error("inter-adapter-unhandled-type", request=request) |
| */ |
| return nil |
| } |
| |
| //DisableDevice locks the ONU and its UNI/VEIP ports (admin lock via OMCI) |
| func (dh *DeviceHandler) DisableDevice(device *voltha.Device) { |
| logger.Debugw("disable-device", log.Fields{"DeviceId": device.Id, "SerialNumber": device.SerialNumber}) |
| |
| // disable UNI ports/ONU |
| // *** should generate UniAdminStateDone event - unrelated to DeviceProcStatusUpdate!! |
| // here the result of the processing is not checked (trusted in background) ***** |
| if dh.pLockStateFsm == nil { |
| dh.createUniLockFsm(true, UniAdminStateDone) |
| } else { //LockStateFSM already init |
| dh.pLockStateFsm.SetSuccessEvent(UniAdminStateDone) |
| dh.runUniLockFsm(true) |
| } |
| |
| if err := dh.coreProxy.DeviceReasonUpdate(context.TODO(), dh.deviceID, "omci-admin-lock"); err != nil { |
| logger.Errorw("error-updating-reason-state", log.Fields{"deviceID": dh.deviceID, "error": err}) |
| } |
| // TODO!!! ConnectStatus and OperStatus to be set here could be more accurate, for now just ... |
| if err := dh.coreProxy.DeviceStateUpdate(context.TODO(), dh.deviceID, voltha.ConnectStatus_REACHABLE, |
| voltha.OperStatus_UNKNOWN); err != nil { |
| logger.Errorw("error-updating-device-state", log.Fields{"deviceID": dh.deviceID, "error": err}) |
| } |
| } |
| |
| //ReenableDevice unlocks the ONU and its UNI/VEIP ports (admin unlock via OMCI) |
| func (dh *DeviceHandler) ReenableDevice(device *voltha.Device) { |
| logger.Debugw("reenable-device", log.Fields{"DeviceId": device.Id, "SerialNumber": device.SerialNumber}) |
| // TODO!!! ConnectStatus and OperStatus to be set here could be more accurate, for now just ... |
| if err := dh.coreProxy.DeviceStateUpdate(context.TODO(), dh.deviceID, voltha.ConnectStatus_REACHABLE, |
| voltha.OperStatus_ACTIVE); err != nil { |
| logger.Errorw("error-updating-device-state", log.Fields{"deviceID": dh.deviceID, "error": err}) |
| } |
| |
| if err := dh.coreProxy.DeviceReasonUpdate(context.TODO(), dh.deviceID, "initial-mib-downloaded"); err != nil { |
| logger.Errorw("error-updating-reason-state", log.Fields{"deviceID": dh.deviceID, "error": err}) |
| } |
| |
| // enable ONU/UNI ports |
| // *** should generate UniAdminStateDone event - unrelated to DeviceProcStatusUpdate!! |
| // here the result of the processing is not checked (trusted in background) ***** |
| if dh.pUnlockStateFsm == nil { |
| dh.createUniLockFsm(false, UniAdminStateDone) |
| } else { //UnlockStateFSM already init |
| dh.pLockStateFsm.SetSuccessEvent(UniAdminStateDone) |
| dh.runUniLockFsm(false) |
| } |
| } |
| |
| func (dh *DeviceHandler) GetOfpPortInfo(device *voltha.Device, |
| portNo int64) (*ic.PortCapability, error) { |
| logger.Debugw("GetOfpPortInfo start", log.Fields{"deviceID": device.Id, "portNo": portNo}) |
| |
| //function body as per OLTAdapter handler code |
| // adapted with values from py dapter code |
| if pUniPort, exist := dh.uniEntityMap[uint32(portNo)]; exist { |
| var macOctets [6]uint8 |
| macOctets[5] = 0x08 |
| macOctets[4] = uint8(dh.ponPortNumber >> 8) |
| macOctets[3] = uint8(dh.ponPortNumber) |
| macOctets[2] = uint8(portNo >> 16) |
| macOctets[1] = uint8(portNo >> 8) |
| macOctets[0] = uint8(portNo) |
| hwAddr := genMacFromOctets(macOctets) |
| capacity := uint32(of.OfpPortFeatures_OFPPF_1GB_FD | of.OfpPortFeatures_OFPPF_FIBER) |
| name := device.SerialNumber + "-" + strconv.FormatUint(uint64(pUniPort.macBpNo), 10) |
| ofUniPortState := of.OfpPortState_OFPPS_LINK_DOWN |
| if pUniPort.operState == vc.OperStatus_ACTIVE { |
| ofUniPortState = of.OfpPortState_OFPPS_LIVE |
| } |
| logger.Debugw("setting LogicalPort", log.Fields{"with-name": name, |
| "withUniPort": pUniPort.name, "withMacBase": hwAddr, "OperState": ofUniPortState}) |
| |
| return &ic.PortCapability{ |
| Port: &voltha.LogicalPort{ |
| OfpPort: &of.OfpPort{ |
| Name: name, |
| //HwAddr: macAddressToUint32Array(dh.device.MacAddress), |
| HwAddr: macAddressToUint32Array(hwAddr), |
| Config: 0, |
| State: uint32(ofUniPortState), |
| Curr: capacity, |
| Advertised: capacity, |
| Peer: capacity, |
| CurrSpeed: uint32(of.OfpPortFeatures_OFPPF_1GB_FD), |
| MaxSpeed: uint32(of.OfpPortFeatures_OFPPF_1GB_FD), |
| }, |
| DeviceId: device.Id, |
| DevicePortNo: uint32(portNo), |
| }, |
| }, nil |
| } |
| logger.Warnw("No UniPort found - abort", log.Fields{"for PortNo": uint32(portNo)}) |
| return nil, errors.New("UniPort not found") |
| } |
| |
| // DeviceHandler methods that implement the adapters interface requests## end ######### |
| // ##################################################################################### |
| |
| // ################ to be updated acc. needs of ONU Device ######################## |
| // DeviceHandler StateMachine related state transition methods ##### begin ######### |
| |
| func (dh *DeviceHandler) logStateChange(e *fsm.Event) { |
| logger.Debugw("Device FSM: ", log.Fields{"event name": string(e.Event), "src state": string(e.Src), "dst state": string(e.Dst), "device-id": dh.deviceID}) |
| } |
| |
| // doStateInit provides the device update to the core |
| func (dh *DeviceHandler) doStateInit(e *fsm.Event) { |
| |
| logger.Debug("doStateInit-started") |
| var err error |
| |
| // populate what we know. rest comes later after mib sync |
| dh.device.Root = false |
| dh.device.Vendor = "OpenONU" |
| dh.device.Model = "go" |
| dh.device.Reason = "activating-onu" |
| |
| dh.logicalDeviceID = dh.deviceID // really needed - what for ??? //TODO!!! |
| dh.coreProxy.DeviceUpdate(context.TODO(), dh.device) |
| |
| dh.parentId = dh.device.ParentId |
| dh.ponPortNumber = dh.device.ParentPortNo |
| |
| // store proxy parameters for later communication - assumption: invariant, else they have to be requested dynamically!! |
| dh.ProxyAddressID = dh.device.ProxyAddress.GetDeviceId() |
| dh.ProxyAddressType = dh.device.ProxyAddress.GetDeviceType() |
| logger.Debugw("device-updated", log.Fields{"deviceID": dh.deviceID, "proxyAddressID": dh.ProxyAddressID, |
| "proxyAddressType": dh.ProxyAddressType, "SNR": dh.device.SerialNumber, |
| "ParentId": dh.parentId, "ParentPortNo": dh.ponPortNumber}) |
| |
| /* |
| self._pon = PonPort.create(self, self._pon_port_number) |
| self._pon.add_peer(self.parent_id, self._pon_port_number) |
| self.logger.debug('adding-pon-port-to-agent', |
| type=self._pon.get_port().type, |
| admin_state=self._pon.get_port().admin_state, |
| oper_status=self._pon.get_port().oper_status, |
| ) |
| */ |
| logger.Debug("adding-pon-port") |
| var ponPortNo uint32 = 1 |
| if dh.ponPortNumber != 0 { |
| ponPortNo = dh.ponPortNumber |
| } |
| |
| pPonPort := &voltha.Port{ |
| PortNo: ponPortNo, |
| Label: fmt.Sprintf("pon-%d", ponPortNo), |
| Type: voltha.Port_PON_ONU, |
| OperStatus: voltha.OperStatus_ACTIVE, |
| Peers: []*voltha.Port_PeerPort{{DeviceId: dh.parentId, // Peer device is OLT |
| PortNo: ponPortNo}}, // Peer port is parent's port number |
| } |
| if err = dh.coreProxy.PortCreated(context.TODO(), dh.deviceID, pPonPort); err != nil { |
| logger.Fatalf("Device FSM: PortCreated-failed-%s", err) |
| e.Cancel(err) |
| return |
| } |
| logger.Debug("doStateInit-done") |
| } |
| |
| // postInit setups the DeviceEntry for the conerned device |
| func (dh *DeviceHandler) postInit(e *fsm.Event) { |
| |
| logger.Debug("postInit-started") |
| var err error |
| /* |
| dh.Client = oop.NewOpenoltClient(dh.clientCon) |
| dh.pTransitionMap.Handle(ctx, GrpcConnected) |
| return nil |
| */ |
| if err = dh.Add_OnuDeviceEntry(context.TODO()); err != nil { |
| logger.Fatalf("Device FSM: Add_OnuDeviceEntry-failed-%s", err) |
| e.Cancel(err) |
| return |
| } |
| |
| /* |
| ############################################################################ |
| # Setup Alarm handler |
| self.events = AdapterEvents(self.core_proxy, device.id, self.logical_device_id, |
| device.serial_number) |
| ############################################################################ |
| # Setup PM configuration for this device |
| # Pass in ONU specific options |
| kwargs = { |
| OnuPmMetrics.DEFAULT_FREQUENCY_KEY: OnuPmMetrics.DEFAULT_ONU_COLLECTION_FREQUENCY, |
| 'heartbeat': self.heartbeat, |
| OnuOmciPmMetrics.OMCI_DEV_KEY: self._onu_omci_device |
| } |
| self.logger.debug('create-pm-metrics', device_id=device.id, serial_number=device.serial_number) |
| self._pm_metrics = OnuPmMetrics(self.events, self.core_proxy, self.device_id, |
| self.logical_device_id, device.serial_number, |
| grouped=True, freq_override=False, **kwargs) |
| pm_config = self._pm_metrics.make_proto() |
| self._onu_omci_device.set_pm_config(self._pm_metrics.omci_pm.openomci_interval_pm) |
| self.logger.info("initial-pm-config", device_id=device.id, serial_number=device.serial_number) |
| yield self.core_proxy.device_pm_config_update(pm_config, init=True) |
| |
| # Note, ONU ID and UNI intf set in add_uni_port method |
| self._onu_omci_device.alarm_synchronizer.set_alarm_params(mgr=self.events, |
| ani_ports=[self._pon]) |
| |
| # Code to Run OMCI Test Action |
| kwargs_omci_test_action = { |
| OmciTestRequest.DEFAULT_FREQUENCY_KEY: |
| OmciTestRequest.DEFAULT_COLLECTION_FREQUENCY |
| } |
| serial_number = device.serial_number |
| self._test_request = OmciTestRequest(self.core_proxy, |
| self.omci_agent, self.device_id, |
| AniG, serial_number, |
| self.logical_device_id, |
| exclusive=False, |
| **kwargs_omci_test_action) |
| |
| self.enabled = True |
| else: |
| self.logger.info('onu-already-activated') |
| */ |
| logger.Debug("postInit-done") |
| } |
| |
| // doStateConnected get the device info and update to voltha core |
| // for comparison of the original method (not that easy to uncomment): compare here: |
| // voltha-openolt-adapter/adaptercore/device_handler.go |
| // -> this one obviously initiates all communication interfaces of the device ...? |
| func (dh *DeviceHandler) doStateConnected(e *fsm.Event) { |
| |
| logger.Debug("doStateConnected-started") |
| var err error |
| err = errors.New("Device FSM: function not implemented yet!") |
| e.Cancel(err) |
| logger.Debug("doStateConnected-done") |
| return |
| } |
| |
| // doStateUp handle the onu up indication and update to voltha core |
| func (dh *DeviceHandler) doStateUp(e *fsm.Event) { |
| |
| logger.Debug("doStateUp-started") |
| var err error |
| err = errors.New("Device FSM: function not implemented yet!") |
| e.Cancel(err) |
| logger.Debug("doStateUp-done") |
| return |
| |
| /* |
| // Synchronous call to update device state - this method is run in its own go routine |
| if err := dh.coreProxy.DeviceStateUpdate(ctx, dh.device.Id, voltha.ConnectStatus_REACHABLE, |
| voltha.OperStatus_ACTIVE); err != nil { |
| logger.Errorw("Failed to update device with OLT UP indication", log.Fields{"deviceID": dh.device.Id, "error": err}) |
| return err |
| } |
| return nil |
| */ |
| } |
| |
| // doStateDown handle the onu down indication |
| func (dh *DeviceHandler) doStateDown(e *fsm.Event) { |
| |
| logger.Debug("doStateDown-started") |
| var err error |
| |
| device := dh.device |
| if device == nil { |
| /*TODO: needs to handle error scenarios */ |
| logger.Error("Failed to fetch handler device") |
| e.Cancel(err) |
| return |
| } |
| |
| cloned := proto.Clone(device).(*voltha.Device) |
| logger.Debugw("do-state-down", log.Fields{"ClonedDeviceID": cloned.Id}) |
| /* |
| // Update the all ports state on that device to disable |
| if er := dh.coreProxy.PortsStateUpdate(ctx, cloned.Id, voltha.OperStatus_UNKNOWN); er != nil { |
| logger.Errorw("updating-ports-failed", log.Fields{"deviceID": device.Id, "error": er}) |
| return er |
| } |
| |
| //Update the device oper state and connection status |
| cloned.OperStatus = voltha.OperStatus_UNKNOWN |
| cloned.ConnectStatus = common.ConnectStatus_UNREACHABLE |
| dh.device = cloned |
| |
| if er := dh.coreProxy.DeviceStateUpdate(ctx, cloned.Id, cloned.ConnectStatus, cloned.OperStatus); er != nil { |
| logger.Errorw("error-updating-device-state", log.Fields{"deviceID": device.Id, "error": er}) |
| return er |
| } |
| |
| //get the child device for the parent device |
| onuDevices, err := dh.coreProxy.GetChildDevices(ctx, dh.device.Id) |
| if err != nil { |
| logger.Errorw("failed to get child devices information", log.Fields{"deviceID": dh.device.Id, "error": err}) |
| return err |
| } |
| for _, onuDevice := range onuDevices.Items { |
| |
| // Update onu state as down in onu adapter |
| onuInd := oop.OnuIndication{} |
| onuInd.OperState = "down" |
| er := dh.AdapterProxy.SendInterAdapterMessage(ctx, &onuInd, ic.InterAdapterMessageType_ONU_IND_REQUEST, |
| "openolt", onuDevice.Type, onuDevice.Id, onuDevice.ProxyAddress.DeviceId, "") |
| if er != nil { |
| logger.Errorw("Failed to send inter-adapter-message", log.Fields{"OnuInd": onuInd, |
| "From Adapter": "openolt", "DevieType": onuDevice.Type, "DeviceID": onuDevice.Id}) |
| //Do not return here and continue to process other ONUs |
| } |
| } |
| // * Discovered ONUs entries need to be cleared , since after OLT |
| // is up, it starts sending discovery indications again* / |
| dh.discOnus = sync.Map{} |
| logger.Debugw("do-state-down-end", log.Fields{"deviceID": device.Id}) |
| return nil |
| */ |
| err = errors.New("Device FSM: function not implemented yet!") |
| e.Cancel(err) |
| logger.Debug("doStateDown-done") |
| return |
| } |
| |
| // DeviceHandler StateMachine related state transition methods ##### end ######### |
| // ################################################################################# |
| |
| // ################################################### |
| // DeviceHandler utility methods ##### begin ######### |
| |
| // Get ONU device entry for this deviceId specific handler |
| func (dh *DeviceHandler) GetOnuDeviceEntry() *OnuDeviceEntry { |
| dh.lockDevice.Lock() |
| defer dh.lockDevice.Unlock() |
| if dh.pOnuOmciDevice != nil { |
| logger.Debugw("GetOnuDeviceEntry params:", |
| log.Fields{"onu_device_entry": dh.pOnuOmciDevice, "device_id": dh.pOnuOmciDevice.deviceID, |
| "device_handler": dh.pOnuOmciDevice.baseDeviceHandler, "core_proxy": dh.pOnuOmciDevice.coreProxy, "adapter_proxy": dh.pOnuOmciDevice.adapterProxy}) |
| } else { |
| logger.Error("GetOnuDeviceEntry returns nil") |
| } |
| return dh.pOnuOmciDevice |
| } |
| |
| // Set ONU device entry |
| func (dh *DeviceHandler) SetOnuDeviceEntry(pDeviceEntry *OnuDeviceEntry) error { |
| dh.lockDevice.Lock() |
| defer dh.lockDevice.Unlock() |
| dh.pOnuOmciDevice = pDeviceEntry |
| return nil |
| } |
| |
| //creates a new ONU device or returns the existing |
| func (dh *DeviceHandler) Add_OnuDeviceEntry(ctx context.Context) error { |
| logger.Debugw("adding-deviceEntry", log.Fields{"for deviceId": dh.deviceID}) |
| |
| deviceEntry := dh.GetOnuDeviceEntry() |
| if deviceEntry == nil { |
| /* costum_me_map in python code seems always to be None, |
| we omit that here first (declaration unclear) -> todo at Adapter specialization ...*/ |
| /* also no 'clock' argument - usage open ...*/ |
| /* and no alarm_db yet (oo.alarm_db) */ |
| deviceEntry = NewOnuDeviceEntry(ctx, dh.deviceID, dh.pOpenOnuAc.KVStoreHost, dh.pOpenOnuAc.KVStorePort, dh.pOpenOnuAc.KVStoreType, |
| dh, dh.coreProxy, dh.AdapterProxy, |
| dh.pOpenOnuAc.pSupportedFsms) //nil as FSM pointer would yield deviceEntry internal defaults ... |
| //error treatment possible //TODO!!! |
| dh.SetOnuDeviceEntry(deviceEntry) |
| logger.Infow("onuDeviceEntry-added", log.Fields{"for deviceId": dh.deviceID}) |
| } else { |
| logger.Infow("onuDeviceEntry-add: Device already exists", log.Fields{"for deviceId": dh.deviceID}) |
| } |
| // might be updated with some error handling !!! |
| return nil |
| } |
| |
| // doStateInit provides the device update to the core |
| func (dh *DeviceHandler) create_interface(onuind *oop.OnuIndication) error { |
| logger.Debugw("create_interface-started", log.Fields{"OnuId": onuind.GetOnuId(), |
| "OnuIntfId": onuind.GetIntfId(), "OnuSerialNumber": onuind.GetSerialNumber()}) |
| |
| dh.pOnuIndication = onuind // let's revise if storing the pointer is sufficient... |
| |
| if err := dh.coreProxy.DeviceStateUpdate(context.TODO(), dh.deviceID, voltha.ConnectStatus_REACHABLE, voltha.OperStatus_ACTIVATING); err != nil { |
| logger.Errorw("error-updating-device-state", log.Fields{"deviceID": dh.deviceID, "error": err}) |
| } |
| |
| // It does not look to me as if makes sense to work with the real core device here, (not the stored clone)? |
| // in this code the GetDevice would just make a check if the DeviceID's Device still exists in core |
| // in python code it looks as the started onu_omci_device might have been updated with some new instance state of the core device |
| // but I would not know why, and the go code anyway dows not work with the device directly anymore in the OnuDeviceEntry |
| // so let's just try to keep it simple ... |
| /* |
| device, err := dh.coreProxy.GetDevice(context.TODO(), dh.device.Id, dh.device.Id) |
| if err != nil || device == nil { |
| //TODO: needs to handle error scenarios |
| logger.Errorw("Failed to fetch device device at creating If", log.Fields{"err": err}) |
| return errors.New("Voltha Device not found") |
| } |
| */ |
| |
| dh.GetOnuDeviceEntry().Start(context.TODO()) |
| if err := dh.coreProxy.DeviceReasonUpdate(context.TODO(), dh.deviceID, "starting-openomci"); err != nil { |
| logger.Errorw("error-DeviceReasonUpdate to starting-openomci", log.Fields{"deviceID": dh.deviceID, "error": err}) |
| } |
| |
| /* this might be a good time for Omci Verify message? */ |
| verifyExec := make(chan bool) |
| omci_verify := NewOmciTestRequest(context.TODO(), |
| dh.device.Id, dh.GetOnuDeviceEntry().PDevOmciCC, |
| true, true) //eclusive and allowFailure (anyway not yet checked) |
| omci_verify.PerformOmciTest(context.TODO(), verifyExec) |
| |
| /* give the handler some time here to wait for the OMCi verification result |
| after Timeout start and try MibUpload FSM anyway |
| (to prevent stopping on just not supported OMCI verification from ONU) */ |
| select { |
| case <-time.After(2 * time.Second): |
| logger.Warn("omci start-verification timed out (continue normal)") |
| case testresult := <-verifyExec: |
| logger.Infow("Omci start verification done", log.Fields{"result": testresult}) |
| } |
| |
| /* In py code it looks earlier (on activate ..) |
| # Code to Run OMCI Test Action |
| kwargs_omci_test_action = { |
| OmciTestRequest.DEFAULT_FREQUENCY_KEY: |
| OmciTestRequest.DEFAULT_COLLECTION_FREQUENCY |
| } |
| serial_number = device.serial_number |
| self._test_request = OmciTestRequest(self.core_proxy, |
| self.omci_agent, self.device_id, |
| AniG, serial_number, |
| self.logical_device_id, |
| exclusive=False, |
| **kwargs_omci_test_action) |
| ... |
| # Start test requests after a brief pause |
| if not self._test_request_started: |
| self._test_request_started = True |
| tststart = _STARTUP_RETRY_WAIT * (random.randint(1, 5)) |
| reactor.callLater(tststart, self._test_request.start_collector) |
| |
| */ |
| /* which is then: in omci_test_request.py : */ |
| /* |
| def start_collector(self, callback=None): |
| """ |
| Start the collection loop for an adapter if the frequency > 0 |
| |
| :param callback: (callable) Function to call to collect PM data |
| """ |
| self.logger.info("starting-pm-collection", device_name=self.name, default_freq=self.default_freq) |
| if callback is None: |
| callback = self.perform_test_omci |
| |
| if self.lc is None: |
| self.lc = LoopingCall(callback) |
| |
| if self.default_freq > 0: |
| self.lc.start(interval=self.default_freq / 10) |
| |
| def perform_test_omci(self): |
| """ |
| Perform the initial test request |
| """ |
| ani_g_entities = self._device.configuration.ani_g_entities |
| ani_g_entities_ids = list(ani_g_entities.keys()) if ani_g_entities \ |
| is not None else None |
| self._entity_id = ani_g_entities_ids[0] |
| self.logger.info('perform-test', entity_class=self._entity_class, |
| entity_id=self._entity_id) |
| try: |
| frame = MEFrame(self._entity_class, self._entity_id, []).test() |
| result = yield self._device.omci_cc.send(frame) |
| if not result.fields['omci_message'].fields['success_code']: |
| self.logger.info('Self-Test Submitted Successfully', |
| code=result.fields[ |
| 'omci_message'].fields['success_code']) |
| else: |
| raise TestFailure('Test Failure: {}'.format( |
| result.fields['omci_message'].fields['success_code'])) |
| except TimeoutError as e: |
| self.deferred.errback(failure.Failure(e)) |
| |
| except Exception as e: |
| self.logger.exception('perform-test-Error', e=e, |
| class_id=self._entity_class, |
| entity_id=self._entity_id) |
| self.deferred.errback(failure.Failure(e)) |
| |
| */ |
| |
| // PM related heartbeat??? !!!TODO.... |
| //self._heartbeat.enabled = True |
| |
| //call MibUploadFSM - transition up to state "in_sync" |
| pMibUlFsm := dh.GetOnuDeviceEntry().pMibUploadFsm.pFsm |
| if pMibUlFsm != nil { |
| if pMibUlFsm.Is("disabled") { |
| if err := pMibUlFsm.Event("start"); err != nil { |
| logger.Errorw("MibSyncFsm: Can't go to state starting", log.Fields{"err": err}) |
| return errors.New("Can't go to state starting") |
| } else { |
| logger.Debugw("MibSyncFsm", log.Fields{"state": string(pMibUlFsm.Current())}) |
| //Determine ONU status and start/re-start MIB Synchronization tasks |
| //Determine if this ONU has ever synchronized |
| if true { //TODO: insert valid check |
| if err := pMibUlFsm.Event("load_mib_template"); err != nil { |
| logger.Errorw("MibSyncFsm: Can't go to state loading_mib_template", log.Fields{"err": err}) |
| return errors.New("Can't go to state loading_mib_template") |
| } |
| } else { |
| pMibUlFsm.Event("examine_mds") |
| logger.Debugw("state of MibSyncFsm", log.Fields{"state": string(pMibUlFsm.Current())}) |
| //Examine the MIB Data Sync |
| // callbacks to be handled: |
| // Event("success") |
| // Event("timeout") |
| // Event("mismatch") |
| } |
| } |
| } else { |
| logger.Errorw("wrong state of MibSyncFsm - want: disabled", log.Fields{"have": string(pMibUlFsm.Current())}) |
| return errors.New("wrong state of MibSyncFsm") |
| } |
| } else { |
| logger.Errorw("MibSyncFsm invalid - cannot be executed!!", log.Fields{"deviceID": dh.deviceID}) |
| } |
| return nil |
| } |
| |
| func (dh *DeviceHandler) update_interface(onuind *oop.OnuIndication) error { |
| logger.Debug("update_interface-started - not yet implemented") |
| return nil |
| } |
| |
| func (dh *DeviceHandler) DeviceProcStatusUpdate(dev_Event OnuDeviceEvent) { |
| switch dev_Event { |
| case MibDatabaseSync: |
| { |
| logger.Infow("MibInSync event: update dev state to 'MibSync complete'", log.Fields{"deviceID": dh.deviceID}) |
| //initiate DevStateUpdate |
| if err := dh.coreProxy.DeviceReasonUpdate(context.TODO(), dh.deviceID, "discovery-mibsync-complete"); err != nil { |
| logger.Errorw("error-DeviceReasonUpdate to 'mibsync-complete'", log.Fields{ |
| "deviceID": dh.deviceID, "error": err}) |
| } |
| |
| unigMap, ok := dh.GetOnuDeviceEntry().pOnuDB.meDb[me.UniGClassID] |
| unigInstKeys := dh.GetOnuDeviceEntry().pOnuDB.GetSortedInstKeys(unigMap) |
| i := uint8(0) //UNI Port limit: see MaxUnisPerOnu (by now 16) (OMCI supports max 255 p.b.) |
| if ok { |
| for _, mgmtEntityId := range unigInstKeys { |
| logger.Debugw("Add UNI port for stored UniG instance:", log.Fields{ |
| "deviceId": dh.deviceID, "UnigMe EntityID": mgmtEntityId}) |
| dh.addUniPort(mgmtEntityId, i, UniPPTP) |
| i++ |
| } |
| } else { |
| logger.Debugw("No UniG instances found", log.Fields{"deviceId": dh.deviceID}) |
| } |
| veipMap, ok := dh.GetOnuDeviceEntry().pOnuDB.meDb[me.VirtualEthernetInterfacePointClassID] |
| veipInstKeys := dh.GetOnuDeviceEntry().pOnuDB.GetSortedInstKeys(veipMap) |
| if ok { |
| for _, mgmtEntityId := range veipInstKeys { |
| logger.Debugw("Add VEIP acc. to stored VEIP instance:", log.Fields{ |
| "deviceId": dh.deviceID, "VEIP EntityID": mgmtEntityId}) |
| dh.addUniPort(mgmtEntityId, i, UniVEIP) |
| i++ |
| } |
| } else { |
| logger.Debugw("No VEIP instances found", log.Fields{"deviceId": dh.deviceID}) |
| } |
| if i == 0 { |
| logger.Warnw("No PPTP instances found", log.Fields{"deviceId": dh.deviceID}) |
| } |
| |
| // Init Uni Ports to Admin locked state |
| // maybe not really needed here as UNI ports should be locked by default, but still left as available in python code |
| // *** should generate UniLockStateDone event ***** |
| if dh.pLockStateFsm == nil { |
| dh.createUniLockFsm(true, UniLockStateDone) |
| } else { //LockStateFSM already init |
| dh.pLockStateFsm.SetSuccessEvent(UniLockStateDone) |
| dh.runUniLockFsm(true) |
| } |
| } |
| case UniLockStateDone: |
| { |
| logger.Infow("UniLockStateDone event: Starting MIB download", log.Fields{"deviceID": dh.deviceID}) |
| /* Mib download procedure - |
| ***** should run over 'downloaded' state and generate MibDownloadDone event ***** |
| */ |
| pMibDlFsm := dh.GetOnuDeviceEntry().pMibDownloadFsm.pFsm |
| if pMibDlFsm != nil { |
| if pMibDlFsm.Is("disabled") { |
| if err := pMibDlFsm.Event("start"); err != nil { |
| logger.Errorw("MibDownloadFsm: Can't go to state starting", log.Fields{"err": err}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } else { |
| logger.Debugw("MibDownloadFsm", log.Fields{"state": string(pMibDlFsm.Current())}) |
| // maybe use more specific states here for the specific download steps ... |
| if err := pMibDlFsm.Event("create_gal"); err != nil { |
| logger.Errorw("MibDownloadFsm: Can't start CreateGal", log.Fields{"err": err}) |
| } else { |
| logger.Debugw("state of MibDownloadFsm", log.Fields{"state": string(pMibDlFsm.Current())}) |
| //Begin MIB data download (running autonomously) |
| } |
| } |
| } else { |
| logger.Errorw("wrong state of MibDownloadFsm - want: disabled", log.Fields{"have": string(pMibDlFsm.Current())}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } |
| /***** Mib download started */ |
| } else { |
| logger.Errorw("MibDownloadFsm invalid - cannot be executed!!", log.Fields{"deviceID": dh.deviceID}) |
| } |
| } |
| case MibDownloadDone: |
| { |
| logger.Infow("MibDownloadDone event: update dev state to 'Oper.Active'", log.Fields{"deviceID": dh.deviceID}) |
| //initiate DevStateUpdate |
| if err := dh.coreProxy.DeviceStateUpdate(context.TODO(), dh.deviceID, |
| voltha.ConnectStatus_REACHABLE, voltha.OperStatus_ACTIVE); err != nil { |
| logger.Errorw("error-updating-device-state", log.Fields{"deviceID": dh.deviceID, "error": err}) |
| } |
| logger.Debug("MibDownloadDone Event: update dev reason to 'initial-mib-downloaded'") |
| if err := dh.coreProxy.DeviceReasonUpdate(context.TODO(), dh.deviceID, "initial-mib-downloaded"); err != nil { |
| logger.Errorw("error-DeviceReasonUpdate to 'initial-mib-downloaded'", |
| log.Fields{"deviceID": dh.deviceID, "error": err}) |
| } |
| |
| // *** should generate UniUnlockStateDone event ***** |
| if dh.pUnlockStateFsm == nil { |
| dh.createUniLockFsm(false, UniUnlockStateDone) |
| } else { //UnlockStateFSM already init |
| dh.pUnlockStateFsm.SetSuccessEvent(UniUnlockStateDone) |
| dh.runUniLockFsm(false) |
| } |
| } |
| case UniUnlockStateDone: |
| { |
| go dh.enableUniPortStateUpdate(dh.deviceID) //cmp python yield self.enable_ports() |
| |
| logger.Infow("UniUnlockStateDone event: Sending OnuUp event", log.Fields{"deviceID": dh.deviceID}) |
| raisedTs := time.Now().UnixNano() |
| go dh.sendOnuOperStateEvent(voltha.OperStatus_ACTIVE, dh.deviceID, raisedTs) //cmp python onu_active_event |
| } |
| default: |
| { |
| logger.Warnw("unhandled-device-event", log.Fields{"deviceID": dh.deviceID, "event": dev_Event}) |
| } |
| } //switch |
| } |
| |
| func (dh *DeviceHandler) addUniPort(a_uniInstNo uint16, a_uniId uint8, a_portType UniPortType) { |
| // parameters are IntfId, OnuId, uniId |
| uniNo := MkUniPortNum(dh.pOnuIndication.GetIntfId(), dh.pOnuIndication.GetOnuId(), |
| uint32(a_uniId)) |
| if _, present := dh.uniEntityMap[uniNo]; present { |
| logger.Warnw("onuUniPort-add: Port already exists", log.Fields{"for InstanceId": a_uniInstNo}) |
| } else { |
| //with arguments a_uniId, a_portNo, a_portType |
| pUniPort := NewOnuUniPort(a_uniId, uniNo, a_uniInstNo, a_portType) |
| if pUniPort == nil { |
| logger.Warnw("onuUniPort-add: Could not create Port", log.Fields{"for InstanceId": a_uniInstNo}) |
| } else { |
| //store UniPort with the System-PortNumber key |
| dh.uniEntityMap[uniNo] = pUniPort |
| // create announce the UniPort to the core as VOLTHA Port object |
| if err := pUniPort.CreateVolthaPort(dh); err == nil { |
| logger.Infow("onuUniPort-added", log.Fields{"for PortNo": uniNo}) |
| } //error logging already within UniPort method |
| } |
| } |
| } |
| |
| // Enable listen on UniPortState changes and update core port state accordingly |
| func (dh *DeviceHandler) enableUniPortStateUpdate(a_deviceID string) { |
| // py code was updated 2003xx to activate the real ONU UNI ports per OMCI (VEIP or PPTP) |
| // but towards core only the first port active state is signalled |
| // with following remark: |
| // # TODO: for now only support the first UNI given no requirement for multiple uni yet. Also needed to reduce flow |
| // # load on the core |
| |
| // lock_ports(false) as done in py code here is shifted to separate call from devicevent processing |
| |
| for uniNo, uniPort := range dh.uniEntityMap { |
| // only if this port is validated for operState transfer} |
| if (1<<uniPort.uniId)&ActiveUniPortStateUpdateMask == (1 << uniPort.uniId) { |
| logger.Infow("onuUniPort-forced-OperState-ACTIVE", log.Fields{"for PortNo": uniNo}) |
| uniPort.SetOperState(vc.OperStatus_ACTIVE) |
| //maybe also use getter functions on uniPort - perhaps later ... |
| go dh.coreProxy.PortStateUpdate(context.TODO(), a_deviceID, voltha.Port_ETHERNET_UNI, uniPort.portNo, uniPort.operState) |
| } |
| } |
| } |
| |
| // ONU_Active/Inactive announcement on system KAFKA bus |
| // tried to re-use procedure of oltUpDownIndication from openolt_eventmgr.go with used values from Py code |
| func (dh *DeviceHandler) sendOnuOperStateEvent(a_OperState vc.OperStatus_Types, a_deviceID string, raisedTs int64) { |
| var de voltha.DeviceEvent |
| eventContext := make(map[string]string) |
| //Populating event context |
| // assume giving ParentId in GetDevice twice really gives the ParentDevice (there is no GetParentDevice()...) |
| parentDevice, err := dh.coreProxy.GetDevice(context.TODO(), dh.parentId, dh.parentId) |
| if err != nil || parentDevice == nil { |
| logger.Errorw("Failed to fetch parent device for OnuEvent", |
| log.Fields{"parentId": dh.parentId, "err": err}) |
| } |
| oltSerialNumber := parentDevice.SerialNumber |
| |
| eventContext["pon-id"] = strconv.FormatUint(uint64(dh.pOnuIndication.IntfId), 10) |
| eventContext["onu-id"] = strconv.FormatUint(uint64(dh.pOnuIndication.OnuId), 10) |
| eventContext["serial-number"] = dh.device.SerialNumber |
| eventContext["olt_serial_number"] = oltSerialNumber |
| eventContext["device_id"] = a_deviceID |
| eventContext["registration_id"] = a_deviceID //py: string(device_id)?? |
| logger.Debugw("prepare ONU_ACTIVATED event", |
| log.Fields{"DeviceId": a_deviceID, "EventContext": eventContext}) |
| |
| /* Populating device event body */ |
| de.Context = eventContext |
| de.ResourceId = a_deviceID |
| if a_OperState == voltha.OperStatus_ACTIVE { |
| de.DeviceEventName = fmt.Sprintf("%s_%s", cOnuActivatedEvent, "RAISE_EVENT") |
| de.Description = fmt.Sprintf("%s Event - %s - %s", |
| cEventObjectType, cOnuActivatedEvent, "Raised") |
| } else { |
| de.DeviceEventName = fmt.Sprintf("%s_%s", cOnuActivatedEvent, "CLEAR_EVENT") |
| de.Description = fmt.Sprintf("%s Event - %s - %s", |
| cEventObjectType, cOnuActivatedEvent, "Cleared") |
| } |
| /* Send event to KAFKA */ |
| if err := dh.EventProxy.SendDeviceEvent(&de, equipment, pon, raisedTs); err != nil { |
| logger.Warnw("could not send ONU_ACTIVATED event", |
| log.Fields{"DeviceId": a_deviceID, "error": err}) |
| } |
| logger.Debugw("ONU_ACTIVATED event sent to KAFKA", |
| log.Fields{"DeviceId": a_deviceID, "with-EventName": de.DeviceEventName}) |
| } |
| |
| // createUniLockFsm initialises and runs the UniLock FSM to transfer teh OMCi related commands for port lock/unlock |
| func (dh *DeviceHandler) createUniLockFsm(aAdminState bool, devEvent OnuDeviceEvent) { |
| chLSFsm := make(chan Message, 2048) |
| var sFsmName string |
| if aAdminState == true { |
| logger.Infow("createLockStateFSM", log.Fields{"deviceID": dh.deviceID}) |
| sFsmName = "LockStateFSM" |
| } else { |
| logger.Infow("createUnlockStateFSM", log.Fields{"deviceID": dh.deviceID}) |
| sFsmName = "UnLockStateFSM" |
| } |
| pLSFsm := NewLockStateFsm(dh.GetOnuDeviceEntry().PDevOmciCC, aAdminState, devEvent, |
| sFsmName, dh.deviceID, chLSFsm) |
| if pLSFsm != nil { |
| if aAdminState == true { |
| dh.pLockStateFsm = pLSFsm |
| } else { |
| dh.pUnlockStateFsm = pLSFsm |
| } |
| dh.runUniLockFsm(aAdminState) |
| } else { |
| logger.Errorw("LockStateFSM could not be created - abort!!", log.Fields{"deviceID": dh.deviceID}) |
| } |
| } |
| |
| // runUniLockFsm starts the UniLock FSM to transfer the OMCI related commands for port lock/unlock |
| func (dh *DeviceHandler) runUniLockFsm(aAdminState bool) { |
| /* Uni Port lock/unlock procedure - |
| ***** should run via 'adminDone' state and generate the argument requested event ***** |
| */ |
| var pLSStatemachine *fsm.FSM |
| if aAdminState == true { |
| pLSStatemachine = dh.pLockStateFsm.pAdaptFsm.pFsm |
| //make sure the opposite FSM is not running and if so, terminate it as not relevant anymore |
| if (dh.pUnlockStateFsm != nil) && |
| (dh.pUnlockStateFsm.pAdaptFsm.pFsm.Current() != "disabled") { |
| dh.pUnlockStateFsm.pAdaptFsm.pFsm.Event("reset") |
| } |
| } else { |
| pLSStatemachine = dh.pUnlockStateFsm.pAdaptFsm.pFsm |
| //make sure the opposite FSM is not running and if so, terminate it as not relevant anymore |
| if (dh.pLockStateFsm != nil) && |
| (dh.pLockStateFsm.pAdaptFsm.pFsm.Current() != "disabled") { |
| dh.pLockStateFsm.pAdaptFsm.pFsm.Event("reset") |
| } |
| } |
| if pLSStatemachine != nil { |
| if pLSStatemachine.Is("disabled") { |
| if err := pLSStatemachine.Event("start"); err != nil { |
| logger.Warnw("LockStateFSM: can't start", log.Fields{"err": err}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } else { |
| /***** LockStateFSM started */ |
| logger.Debugw("LockStateFSM started", log.Fields{ |
| "state": pLSStatemachine.Current(), "deviceID": dh.deviceID}) |
| } |
| } else { |
| logger.Warnw("wrong state of LockStateFSM - want: disabled", log.Fields{ |
| "have": pLSStatemachine.Current(), "deviceID": dh.deviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } |
| } else { |
| logger.Errorw("LockStateFSM StateMachine invalid - cannot be executed!!", log.Fields{"deviceID": dh.deviceID}) |
| // maybe try a FSM reset and then again ... - TODO!!! |
| } |
| } |
| |
| /* *********************************************************** */ |
| |
| func genMacFromOctets(a_octets [6]uint8) string { |
| return fmt.Sprintf("%02x:%02x:%02x:%02x:%02x:%02x", |
| a_octets[5], a_octets[4], a_octets[3], |
| a_octets[2], a_octets[1], a_octets[0]) |
| } |
| |
| //copied from OLT Adapter: unify centrally ? |
| func macAddressToUint32Array(mac string) []uint32 { |
| slist := strings.Split(mac, ":") |
| result := make([]uint32, len(slist)) |
| var err error |
| var tmp int64 |
| for index, val := range slist { |
| if tmp, err = strconv.ParseInt(val, 16, 32); err != nil { |
| return []uint32{1, 2, 3, 4, 5, 6} |
| } |
| result[index] = uint32(tmp) |
| } |
| return result |
| } |