blob: f53479fc36a79e001665be554da16059002c73d4 [file] [log] [blame]
/*
* Copyright 2020-present Open Networking Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
//Package adaptercoreonu provides the utility for onu devices, flows and statistics
package adaptercoreonu
import (
"container/list"
"context"
"encoding/binary"
"encoding/hex"
"errors"
"fmt"
"strconv"
"sync"
//"time"
"github.com/google/gopacket"
// TODO!!! Some references could be resolved auto, but some need specific context ....
gp "github.com/google/gopacket"
"github.com/opencord/omci-lib-go"
me "github.com/opencord/omci-lib-go/generated"
"github.com/opencord/voltha-lib-go/v3/pkg/adapters/adapterif"
//"github.com/opencord/voltha-lib-go/v3/pkg/kafka"
"github.com/opencord/voltha-lib-go/v3/pkg/log"
ic "github.com/opencord/voltha-protos/v3/go/inter_container"
//"github.com/opencord/voltha-protos/v3/go/openflow_13"
//"github.com/opencord/voltha-protos/v3/go/voltha"
)
// ### OMCI related definitions - retrieved from Python adapter code/trace ####
//ConstDefaultOmciTimeout - Default OMCI Timeout
const ConstDefaultOmciTimeout = 10 // ( 3 ?) Seconds
const galEthernetEID = uint16(1)
const maxGemPayloadSize = uint16(48)
const connectivityModeValue = uint8(5)
//const defaultTPID = uint16(0x8100)
//const broadComDefaultVID = uint16(4091)
const macBridgeServiceProfileEID = uint16(0x201) // TODO: most all these need better definition or tuning
const ieeeMapperServiceProfileEID = uint16(0x8001)
const macBridgePortAniEID = uint16(0x2102)
// ### OMCI related definitions - end
//callbackPairEntry to be used for OMCI send/receive correlation
type callbackPairEntry struct {
cbRespChannel chan Message
cbFunction func(*omci.OMCI, *gp.Packet, chan Message) error
}
//callbackPair to be used for ReceiveCallback init
type callbackPair struct {
cbKey uint16
cbEntry callbackPairEntry
}
type omciTransferStructure struct {
txFrame []byte
timeout int
retry int
highPrio bool
}
//omciCC structure holds information needed for OMCI communication (to/from OLT Adapter)
type omciCC struct {
enabled bool
pOnuDeviceEntry *OnuDeviceEntry
deviceID string
pBaseDeviceHandler *deviceHandler
coreProxy adapterif.CoreProxy
adapterProxy adapterif.AdapterProxy
supportExtMsg bool
//txRequest
//rxResponse
//pendingRequest
txFrames, txOnuFrames uint32
rxFrames, rxOnuFrames, rxOnuDiscards uint32
// OMCI params
mutexTid sync.Mutex
tid uint16
mutexHpTid sync.Mutex
hpTid uint16
uploadSequNo uint16
uploadNoOfCmds uint16
mutexTxQueue sync.Mutex
txQueue *list.List
mutexRxSchedMap sync.Mutex
rxSchedulerMap map[uint16]callbackPairEntry
pLastTxMeInstance *me.ManagedEntity
}
//newOmciCC constructor returns a new instance of a OmciCC
//mib_db (as well as not inluded alarm_db not really used in this code? VERIFY!!)
func newOmciCC(ctx context.Context, onuDeviceEntry *OnuDeviceEntry,
deviceID string, deviceHandler *deviceHandler,
coreProxy adapterif.CoreProxy, adapterProxy adapterif.AdapterProxy) *omciCC {
logger.Infow("init-omciCC", log.Fields{"device-id": deviceID})
var omciCC omciCC
omciCC.enabled = false
omciCC.pOnuDeviceEntry = onuDeviceEntry
omciCC.deviceID = deviceID
omciCC.pBaseDeviceHandler = deviceHandler
omciCC.coreProxy = coreProxy
omciCC.adapterProxy = adapterProxy
omciCC.supportExtMsg = false
omciCC.txFrames = 0
omciCC.txOnuFrames = 0
omciCC.rxFrames = 0
omciCC.rxOnuFrames = 0
omciCC.rxOnuDiscards = 0
omciCC.tid = 0x1
omciCC.hpTid = 0x8000
omciCC.uploadSequNo = 0
omciCC.uploadNoOfCmds = 0
omciCC.txQueue = list.New()
omciCC.rxSchedulerMap = make(map[uint16]callbackPairEntry)
return &omciCC
}
//stop stops/resets the omciCC
func (oo *omciCC) stop(ctx context.Context) error {
logger.Debugw("omciCC-stopping", log.Fields{"for device-id": oo.deviceID})
//reseting all internal data, which might also be helpful for discarding any lingering tx/rx requests
oo.mutexTxQueue.Lock()
oo.txQueue.Init() // clear the tx queue
oo.mutexTxQueue.Unlock()
oo.mutexRxSchedMap.Lock()
for k := range oo.rxSchedulerMap {
delete(oo.rxSchedulerMap, k) //clear the scheduler map
}
oo.mutexRxSchedMap.Unlock()
oo.mutexHpTid.Lock()
oo.hpTid = 0x8000 //reset the high prio transactionId
oo.mutexHpTid.Unlock()
oo.mutexTid.Lock()
oo.tid = 1 //reset the low prio transactionId
oo.mutexTid.Unlock()
//reset control values
oo.uploadSequNo = 0
oo.uploadNoOfCmds = 0
//reset the stats counter - which might be topic of discussion ...
oo.txFrames = 0
oo.txOnuFrames = 0
oo.rxFrames = 0
oo.rxOnuFrames = 0
oo.rxOnuDiscards = 0
return nil
}
// Rx handler for omci messages
func (oo *omciCC) receiveOnuMessage(ctx context.Context, omciMsg *omci.OMCI) error {
logger.Debugw("rx-onu-autonomous-message", log.Fields{"omciMsgType": omciMsg.MessageType,
"payload": hex.EncodeToString(omciMsg.Payload)})
/*
msgType = rxFrame.fields["message_type"] //assumed OmciOperationsValue
rxOnuFrames++
switch msgType {
case AlarmNotification:
{
logger.Info("Unhandled: received-onu-alarm-message")
// python code was:
//if msg_type == EntityOperations.AlarmNotification.value:
// topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.Alarm_Notification)
// self.reactor.callLater(0, self.event_bus.publish, topic, msg)
//
return errors.New("RxAlarmNotification unimplemented")
}
case AttributeValueChange:
{
logger.Info("Unhandled: received-attribute-value-change")
// python code was:
//elif msg_type == EntityOperations.AttributeValueChange.value:
// topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.AVC_Notification)
// self.reactor.callLater(0, self.event_bus.publish, topic, msg)
//
return errors.New("RxAttributeValueChange unimplemented")
}
case TestResult:
{
logger.Info("Unhandled: received-test-result")
// python code was:
//elif msg_type == EntityOperations.TestResult.value:
// topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.Test_Result)
// self.reactor.callLater(0, self.event_bus.publish, topic, msg)
//
return errors.New("RxTestResult unimplemented")
}
default:
{
logger.Errorw("rx-onu-unsupported-autonomous-message", log.Fields{"msgType": msgType})
rxOnuDiscards++
return errors.New("RxOnuMsgType unimplemented")
}
}
*/
return errors.New("receiveOnuMessage unimplemented")
}
// Rx handler for onu messages
// e.g. would call ReceiveOnuMessage() in case of TID=0 or Action=test ...
func (oo *omciCC) receiveMessage(ctx context.Context, rxMsg []byte) error {
//logger.Debugw("cc-receive-omci-message", log.Fields{"RxOmciMessage-x2s": hex.EncodeToString(rxMsg)})
if len(rxMsg) >= 44 { // then it should normally include the BaseFormat trailer Len
// NOTE: autocorrection only valid for OmciBaseFormat, which is not specifically verified here!!!
// (am extendedFormat message could be destroyed this way!)
trailerLenData := rxMsg[42:44]
trailerLen := binary.BigEndian.Uint16(trailerLenData)
//logger.Debugw("omci-received-trailer-len", log.Fields{"Length": trailerLen})
if trailerLen != 40 { // invalid base Format entry -> autocorrect
binary.BigEndian.PutUint16(rxMsg[42:44], 40)
logger.Debug("cc-corrected-omci-message: trailer len inserted")
}
} else {
logger.Errorw("received omci-message too small for OmciBaseFormat - abort", log.Fields{"Length": len(rxMsg)})
return fmt.Errorf("rxOmciMessage too small for BaseFormat %s", oo.deviceID)
}
packet := gopacket.NewPacket(rxMsg, omci.LayerTypeOMCI, gopacket.NoCopy)
if packet == nil {
logger.Errorw("omci-message could not be decoded", log.Fields{"deviceID": oo.deviceID})
return fmt.Errorf("could not decode rxMsg as OMCI %s", oo.deviceID)
}
omciLayer := packet.Layer(omci.LayerTypeOMCI)
if omciLayer == nil {
logger.Errorw("omci-message could not decode omci layer", log.Fields{"deviceID": oo.deviceID})
return fmt.Errorf("could not decode omci layer %s", oo.deviceID)
}
omciMsg, ok := omciLayer.(*omci.OMCI)
if !ok {
logger.Errorw("omci-message could not assign omci layer", log.Fields{"deviceID": oo.deviceID})
return fmt.Errorf("could not assign omci layer %s", oo.deviceID)
}
logger.Debugw("omci-message-decoded:", log.Fields{"omciMsgType": omciMsg.MessageType,
"transCorrId": strconv.FormatInt(int64(omciMsg.TransactionID), 16), "DeviceIdent": omciMsg.DeviceIdentifier})
if byte(omciMsg.MessageType)&me.AK == 0 {
// Not a response
logger.Debug("RxMsg is no Omci Response Message")
if omciMsg.TransactionID == 0 {
return oo.receiveOnuMessage(ctx, omciMsg)
}
logger.Errorw("Unexpected TransCorrId != 0 not accepted for autonomous messages",
log.Fields{"msgType": omciMsg.MessageType, "payload": hex.EncodeToString(omciMsg.Payload),
"deviceID": oo.deviceID})
return fmt.Errorf("autonomous Omci Message with TranSCorrId != 0 not acccepted %s", oo.deviceID)
}
//logger.Debug("RxMsg is a Omci Response Message: try to schedule it to the requester")
oo.mutexRxSchedMap.Lock()
rxCallbackEntry, ok := oo.rxSchedulerMap[omciMsg.TransactionID]
if ok && rxCallbackEntry.cbFunction != nil {
//disadvantage of decoupling: error verification made difficult, but anyway the question is
// how to react on erroneous frame reception, maybe can simply be ignored
go rxCallbackEntry.cbFunction(omciMsg, &packet, rxCallbackEntry.cbRespChannel)
// having posted the response the request is regarded as 'done'
delete(oo.rxSchedulerMap, omciMsg.TransactionID)
oo.mutexRxSchedMap.Unlock()
} else {
oo.mutexRxSchedMap.Unlock()
logger.Errorw("omci-message-response for not registered transCorrId", log.Fields{"deviceID": oo.deviceID})
return fmt.Errorf("could not find registered response handler tor transCorrId %s", oo.deviceID)
}
return nil
/* py code was:
Receive and OMCI message from the proxy channel to the OLT.
Call this from your ONU Adapter on a new OMCI Rx on the proxy channel
:param msg: (str) OMCI binary message (used as input to Scapy packet decoder)
"""
if not self.enabled:
return
try:
now = arrow.utcnow()
d = None
# NOTE: Since we may need to do an independent ME map on a per-ONU basis
# save the current value of the entity_id_to_class_map, then
# replace it with our custom one before decode, and then finally
# restore it later. Tried other ways but really made the code messy.
saved_me_map = omci_entities.entity_id_to_class_map
omci_entities.entity_id_to_class_map = self._me_map
try:
rx_frame = msg if isinstance(msg, OmciFrame) else OmciFrame(msg)
self.logger.debug('recv-omci-msg', omci_msg=hexlify(msg))
except KeyError as e:
# Unknown, Unsupported, or vendor-specific ME. Key is the unknown classID
self.logger.debug('frame-decode-key-error', omci_msg=hexlify(msg), e=e)
rx_frame = self._decode_unknown_me(msg)
self._rx_unknown_me += 1
except Exception as e:
self.logger.exception('frame-decode', omci_msg=hexlify(msg), e=e)
return
finally:
omci_entities.entity_id_to_class_map = saved_me_map # Always restore it.
rx_tid = rx_frame.fields['transaction_id']
msg_type = rx_frame.fields['message_type']
self.logger.debug('Received message for rx_tid', rx_tid = rx_tid, msg_type = msg_type)
# Filter the Test Result frame and route through receive onu
# message method.
if rx_tid == 0 or msg_type == EntityOperations.TestResult.value:
self.logger.debug('Receive ONU message', rx_tid=0)
return self._receive_onu_message(rx_frame)
# Previously unreachable if this is the very first round-trip Rx or we
# have been running consecutive errors
if self._rx_frames == 0 or self._consecutive_errors != 0:
self.logger.debug('Consecutive errors for rx', err = self._consecutive_errors)
self.reactor.callLater(0, self._publish_connectivity_event, True)
self._rx_frames += 1
self._consecutive_errors = 0
try:
high_priority = self._tid_is_high_priority(rx_tid)
index = self._get_priority_index(high_priority)
# (timestamp, defer, frame, timeout, retry, delayedCall)
last_tx_tuple = self._tx_request[index]
if last_tx_tuple is None or \
last_tx_tuple[OMCI_CC.REQUEST_FRAME].fields.get('transaction_id') != rx_tid:
# Possible late Rx on a message that timed-out
if last_tx_tuple:
self.logger.debug('Unknown message', rx_tid=rx_tid,
tx_id=last_tx_tuple[OMCI_CC.REQUEST_FRAME].fields.get('transaction_id'))
self._rx_unknown_tid += 1
self._rx_late += 1
return
ts, d, tx_frame, timeout, retry, dc = last_tx_tuple
if dc is not None and not dc.cancelled and not dc.called:
dc.cancel()
_secs = self._update_rx_tx_stats(now, ts)
# Late arrival already serviced by a timeout?
if d.called:
self._rx_late += 1
self.logger.debug('Serviced by timeout. Late arrival', rx_late = self._rx_late)
return
except Exception as e:
self.logger.exception('frame-match', msg=hexlify(msg), e=e)
if d is not None:
return d.errback(failure.Failure(e))
return
# Publish Rx event to listeners in a different task
self.logger.debug('Publish rx event', rx_tid = rx_tid,
tx_tid = tx_frame.fields['transaction_id'])
reactor.callLater(0, self._publish_rx_frame, tx_frame, rx_frame)
# begin success callback chain (will cancel timeout and queue next Tx message)
self._rx_response[index] = rx_frame
d.callback(rx_frame)
except Exception as e:
self.logger.exception('rx-msg', e=e)
*/
}
/*
func (oo *omciCC) publishRxResponseFrame(ctx context.Context, txFrame []byte, rxFrame []byte) error {
return errors.New("publishRxResponseFrame unimplemented")
//def _publish_rx_frame(self, tx_frame, rx_frame):
}
*/
//Queue the OMCI Frame for a transmit to the ONU via the proxy_channel
func (oo *omciCC) send(ctx context.Context, txFrame []byte, timeout int, retry int, highPrio bool,
receiveCallbackPair callbackPair) error {
logger.Debugw("register-response-callback:", log.Fields{"for TansCorrId": receiveCallbackPair.cbKey})
// it could be checked, if the callback keay is already registered - but simply overwrite may be acceptable ...
oo.mutexRxSchedMap.Lock()
oo.rxSchedulerMap[receiveCallbackPair.cbKey] = receiveCallbackPair.cbEntry
oo.mutexRxSchedMap.Unlock()
//just use a simple list for starting - might need some more effort, especially for multi source write access
omciTxRequest := omciTransferStructure{
txFrame,
timeout,
retry,
highPrio,
}
oo.mutexTxQueue.Lock()
oo.txQueue.PushBack(omciTxRequest) // enqueue
oo.mutexTxQueue.Unlock()
// for first test just bypass and send directly:
go oo.sendNextRequest(ctx)
return nil
}
//Pull next tx request and send it
func (oo *omciCC) sendNextRequest(ctx context.Context) error {
// return errors.New("sendNextRequest unimplemented")
// just try to get something transferred !!
// avoid accessing the txQueue from parallel send requests
// block parallel omci send requests at least until SendIAP is 'committed'
// that should be feasible for an onu instance as on OMCI anyway window size 1 is assumed
oo.mutexTxQueue.Lock()
defer oo.mutexTxQueue.Unlock()
for oo.txQueue.Len() > 0 {
queueElement := oo.txQueue.Front() // First element
omciTxRequest := queueElement.Value.(omciTransferStructure)
/* compare olt device handler code:
func (dh *DeviceHandler) omciIndication(omciInd *oop.OmciIndication) {
logger.Debugw("omci indication", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId})
var deviceType string
var deviceID string
var proxyDeviceID string
onuKey := dh.formOnuKey(omciInd.IntfId, omciInd.OnuId)
if onuInCache, ok := dh.onus.Load(onuKey); !ok {
logger.Debugw("omci indication for a device not in cache.", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId})
ponPort := IntfIDToPortNo(omciInd.GetIntfId(), voltha.Port_PON_OLT)
kwargs := make(map[string]interface{})
kwargs["onu_id"] = omciInd.OnuId
kwargs["parent_port_no"] = ponPort
onuDevice, err := dh.coreProxy.GetChildDevice(context.TODO(), dh.device.Id, kwargs)
if err != nil {
logger.Errorw("onu not found", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId, "error": err})
return
}
deviceType = onuDevice.Type
deviceID = onuDevice.Id
proxyDeviceID = onuDevice.ProxyAddress.DeviceId
//if not exist in cache, then add to cache.
dh.onus.Store(onuKey, NewOnuDevice(deviceID, deviceType, onuDevice.SerialNumber, omciInd.OnuId, omciInd.IntfId, proxyDeviceID))
} else {
//found in cache
logger.Debugw("omci indication for a device in cache.", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId})
deviceType = onuInCache.(*OnuDevice).deviceType
deviceID = onuInCache.(*OnuDevice).deviceID
proxyDeviceID = onuInCache.(*OnuDevice).proxyDeviceID
}
*/
/* and compare onu_adapter py code:
omci_msg = InterAdapterOmciMessage(
message=bytes(frame),
proxy_address=self._proxy_address,
connect_status=self._device.connect_status)
self.logger.debug('sent-omci-msg', tid=tx_tid, omci_msg=hexlify(bytes(frame)))
yield self._adapter_proxy.send_inter_adapter_message(
msg=omci_msg,
type=InterAdapterMessageType.OMCI_REQUEST,
from_adapter=self._device.type,
to_adapter=self._proxy_address.device_type,
to_device_id=self._device_id,
proxy_device_id=self._proxy_address.device_id
)
*/
device, err := oo.coreProxy.GetDevice(ctx,
oo.pBaseDeviceHandler.deviceID, oo.deviceID) //parent, child
if err != nil || device == nil {
/*TODO: needs to handle error scenarios */
logger.Errorw("Failed to fetch device", log.Fields{"err": err, "ParentId": oo.pBaseDeviceHandler.deviceID,
"ChildId": oo.deviceID})
return fmt.Errorf("failed to fetch device %s", oo.deviceID)
}
logger.Debugw("omci-message-sending", log.Fields{"fromDeviceType": oo.pBaseDeviceHandler.DeviceType,
"toDeviceType": oo.pBaseDeviceHandler.ProxyAddressType,
"onuDeviceID": oo.deviceID, "proxyDeviceID": oo.pBaseDeviceHandler.ProxyAddressID})
logger.Debugw("omci-message-to-send:",
log.Fields{"TxOmciMessage": hex.EncodeToString(omciTxRequest.txFrame)})
omciMsg := &ic.InterAdapterOmciMessage{Message: omciTxRequest.txFrame}
if sendErr := oo.adapterProxy.SendInterAdapterMessage(context.Background(), omciMsg,
ic.InterAdapterMessageType_OMCI_REQUEST,
//fromType,toType,toDevId, ProxyDevId
oo.pBaseDeviceHandler.DeviceType, oo.pBaseDeviceHandler.ProxyAddressType,
oo.deviceID, oo.pBaseDeviceHandler.ProxyAddressID, ""); sendErr != nil {
logger.Errorw("send omci request error", log.Fields{"ChildId": oo.deviceID, "error": sendErr})
return sendErr
}
oo.txQueue.Remove(queueElement) // Dequeue
}
return nil
}
func (oo *omciCC) getNextTid(highPriority bool) uint16 {
var next uint16
if highPriority {
oo.mutexHpTid.Lock()
next = oo.hpTid
oo.hpTid++
if oo.hpTid < 0x8000 {
oo.hpTid = 0x8000
}
oo.mutexHpTid.Unlock()
} else {
oo.mutexTid.Lock()
next = oo.tid
oo.tid++
if oo.tid >= 0x8000 {
oo.tid = 1
}
oo.mutexTid.Unlock()
}
return next
}
// ###################################################################################
// # utility methods provided to work on OMCI messages
func serialize(msgType omci.MessageType, request gopacket.SerializableLayer, tid uint16) ([]byte, error) {
omciLayer := &omci.OMCI{
TransactionID: tid,
MessageType: msgType,
}
return serializeOmciLayer(omciLayer, request)
}
func serializeOmciLayer(aOmciLayer *omci.OMCI, aRequest gopacket.SerializableLayer) ([]byte, error) {
var options gopacket.SerializeOptions
options.FixLengths = true
buffer := gopacket.NewSerializeBuffer()
err := gopacket.SerializeLayers(buffer, options, aOmciLayer, aRequest)
if err != nil {
logger.Errorw("Could not create goPacket Omci serial buffer", log.Fields{"Err": err})
return nil, err
}
return buffer.Bytes(), nil
}
/*
func hexEncode(omciPkt []byte) ([]byte, error) {
dst := make([]byte, hex.EncodedLen(len(omciPkt)))
hex.Encode(dst, omciPkt)
return dst, nil
}
*/
//supply a response handler for omci response messages to be transferred to the requested FSM
func (oo *omciCC) receiveOmciResponse(omciMsg *omci.OMCI, packet *gp.Packet, respChan chan Message) error {
logger.Debugw("omci-message-response - transfer on omciRespChannel", log.Fields{"omciMsgType": omciMsg.MessageType,
"transCorrId": strconv.FormatInt(int64(omciMsg.TransactionID), 16), "device-id": oo.deviceID})
if oo.pOnuDeviceEntry == nil {
logger.Errorw("Abort receiving OMCI response, DeviceEntryPointer is nil", log.Fields{
"device-id": oo.deviceID})
return fmt.Errorf("deviceEntryPointer is nil %s", oo.deviceID)
}
// no further test on SeqNo is done here, assignment from rxScheduler is trusted
// MibSync responses are simply transferred via deviceEntry to MibSync, no specific analysis here
omciRespMsg := Message{
Type: OMCI,
Data: OmciMessage{
OmciMsg: omciMsg,
OmciPacket: packet,
},
}
//logger.Debugw("Message to be sent into channel:", log.Fields{"mibSyncMsg": mibSyncMsg})
respChan <- omciRespMsg
return nil
}
func (oo *omciCC) sendMibReset(ctx context.Context, timeout int, highPrio bool) error {
logger.Debugw("send MibReset-msg to:", log.Fields{"device-id": oo.deviceID})
request := &omci.MibResetRequest{
MeBasePacket: omci.MeBasePacket{
EntityClass: me.OnuDataClassID,
},
}
tid := oo.getNextTid(highPrio)
pkt, err := serialize(omci.MibResetRequestType, request, tid)
if err != nil {
logger.Errorw("Cannot serialize MibResetRequest", log.Fields{
"Err": err, "device-id": oo.deviceID})
return err
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse},
}
return oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
}
func (oo *omciCC) sendReboot(ctx context.Context, timeout int, highPrio bool, responseChannel chan Message) error {
logger.Debugw("send Reboot-msg to:", log.Fields{"device-id": oo.deviceID})
request := &omci.RebootRequest{
MeBasePacket: omci.MeBasePacket{
EntityClass: me.OnuGClassID,
},
}
tid := oo.getNextTid(highPrio)
pkt, err := serialize(omci.RebootRequestType, request, tid)
if err != nil {
logger.Errorw("Cannot serialize RebootRequest", log.Fields{
"Err": err, "device-id": oo.deviceID})
return err
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{oo.pOnuDeviceEntry.omciRebootMessageReceivedChannel, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send RebootRequest", log.Fields{
"Err": err, "device-id": oo.deviceID})
return err
}
err = oo.pOnuDeviceEntry.waitForRebootResponse(responseChannel)
if err != nil {
logger.Errorw("aborting ONU Reboot!", log.Fields{
"Err": err, "device-id": oo.deviceID})
return err
}
return nil
}
func (oo *omciCC) sendMibUpload(ctx context.Context, timeout int, highPrio bool) error {
logger.Debugw("send MibUpload-msg to:", log.Fields{"device-id": oo.deviceID})
request := &omci.MibUploadRequest{
MeBasePacket: omci.MeBasePacket{
EntityClass: me.OnuDataClassID,
},
}
tid := oo.getNextTid(highPrio)
pkt, err := serialize(omci.MibUploadRequestType, request, tid)
if err != nil {
logger.Errorw("Cannot serialize MibUploadRequest", log.Fields{
"Err": err, "device-id": oo.deviceID})
return err
}
oo.uploadSequNo = 0
oo.uploadNoOfCmds = 0
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse},
}
return oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
}
func (oo *omciCC) sendMibUploadNext(ctx context.Context, timeout int, highPrio bool) error {
logger.Debugw("send MibUploadNext-msg to:", log.Fields{"device-id": oo.deviceID, "uploadSequNo": oo.uploadSequNo})
request := &omci.MibUploadNextRequest{
MeBasePacket: omci.MeBasePacket{
EntityClass: me.OnuDataClassID,
},
CommandSequenceNumber: oo.uploadSequNo,
}
tid := oo.getNextTid(highPrio)
pkt, err := serialize(omci.MibUploadNextRequestType, request, tid)
if err != nil {
logger.Errorw("Cannot serialize MibUploadNextRequest", log.Fields{
"Err": err, "device-id": oo.deviceID})
return err
}
oo.uploadSequNo++
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse},
}
return oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
}
func (oo *omciCC) sendCreateGalEthernetProfile(ctx context.Context, timeout int, highPrio bool) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send GalEnetProfile-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16)})
meParams := me.ParamData{
EntityID: galEthernetEID,
Attributes: me.AttributeValueMap{"MaximumGemPayloadSize": maxGemPayloadSize},
}
meInstance, omciErr := me.NewGalEthernetProfile(meParams)
if omciErr.GetError() == nil {
//all setByCreate parameters already set, no default option required ...
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode GalEnetProfileInstance for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize GalEnetProfile create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send GalEnetProfile create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send GalEnetProfile-Create-msg done")
return meInstance
}
logger.Errorw("Cannot generate GalEnetProfileInstance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
// might be needed to extend for parameter arguments, here just for setting the ConnectivityMode!!
func (oo *omciCC) sendSetOnu2g(ctx context.Context, timeout int, highPrio bool) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send ONU2-G-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16)})
// ONU-G ME-ID is defined to be 0, but we could verify, if the ONU really supports the desired
// connectivity mode 5 (in ConnCap)
// By now we just use fix values to fire - this is anyway what the python adapter does
// read ONU-2G from DB ???? //TODO!!!
meParams := me.ParamData{
EntityID: 0,
Attributes: me.AttributeValueMap{"CurrentConnectivityMode": connectivityModeValue},
}
meInstance, omciErr := me.NewOnu2G(meParams)
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode ONU2-G instance for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize ONU2-G set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send ONU2-G set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send ONU2-G-Set-msg done")
return meInstance
}
logger.Errorw("Cannot generate ONU2-G", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendCreateMBServiceProfile(ctx context.Context,
aPUniPort *onuUniPort, timeout int, highPrio bool) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
instID := macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo)
logger.Debugw("send MBSP-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)})
meParams := me.ParamData{
EntityID: instID,
Attributes: me.AttributeValueMap{
"Priority": 0x8000,
"MaxAge": 20 * 256, //20s
"HelloTime": 2 * 256, //2s
"ForwardDelay": 15 * 256, //15s
//note: DynamicFilteringAgeingTime is taken from omci lib default as
// which is obviously different from default value used in python lib,
// where the value seems to be 0 (ONU defined) - to be considered in case of test artifacts ...
},
}
meInstance, omciErr := me.NewMacBridgeServiceProfile(meParams)
if omciErr.GetError() == nil {
//obviously we have to set all 'untouched' parameters to default by some additional option parameter!!
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType,
omci.TransactionID(tid), omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode MBSP for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize MBSP create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send MBSP create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send MBSP-Create-msg done")
return meInstance
}
logger.Errorw("Cannot generate MBSP Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendCreateMBPConfigData(ctx context.Context,
aPUniPort *onuUniPort, timeout int, highPrio bool) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
instID := macBridgePortAniEID + aPUniPort.entityID
logger.Debugw("send MBPCD-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)})
meParams := me.ParamData{
EntityID: instID,
Attributes: me.AttributeValueMap{
"BridgeIdPointer": macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo),
"PortNum": aPUniPort.macBpNo,
"TpType": uint8(aPUniPort.portType),
"TpPointer": aPUniPort.entityID,
},
}
meInstance, omciErr := me.NewMacBridgePortConfigurationData(meParams)
if omciErr.GetError() == nil {
//obviously we have to set all 'untouched' parameters to default by some additional option parameter!!
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType,
omci.TransactionID(tid), omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode MBPCD for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize MBPCD create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send MBPCD create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send MBPCD-Create-msg done")
return meInstance
}
logger.Errorw("Cannot generate MBPCD Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendCreateEVTOConfigData(ctx context.Context,
aPUniPort *onuUniPort, timeout int, highPrio bool) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
//same entityId is used as for MBSP (see there), but just arbitrary ...
instID := macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo)
logger.Debugw("send EVTOCD-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)})
// compare python adapter code WA VOL-1311: this is not done here!
// (setting TPID values for the create would probably anyway be ignored by the omci lib)
// but perhaps we have to be aware of possible problems at get(Next) Request handling for EVTOOCD tables later ...
assType := uint8(2) // default AssociationType is PPTPEthUni
if aPUniPort.portType == uniVEIP {
assType = uint8(10) // for VEIP
}
meParams := me.ParamData{
EntityID: instID,
Attributes: me.AttributeValueMap{
"AssociationType": assType,
"AssociatedMePointer": aPUniPort.entityID,
},
}
meInstance, omciErr := me.NewExtendedVlanTaggingOperationConfigurationData(meParams)
if omciErr.GetError() == nil {
//all setByCreate parameters already set, no default option required ...
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode EVTOCD for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize EVTOCD create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send EVTOCD create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send EVTOCD-Create-msg done")
return meInstance
}
logger.Errorw("Cannot generate EVTOCD Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendSetOnuGLS(ctx context.Context, timeout int,
highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send ONU-G-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16)})
// ONU-G ME-ID is defined to be 0, no need to perform a DB lookup
meParams := me.ParamData{
EntityID: 0,
Attributes: requestedAttributes,
}
meInstance, omciErr := me.NewOnuG(meParams)
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode ONU-G instance for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize ONU-G set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send ONU-G set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send ONU-G-Set-msg done")
return meInstance
}
logger.Errorw("Cannot generate ONU-G", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendSetPptpEthUniLS(ctx context.Context, aInstNo uint16, timeout int,
highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send PPTPEthUni-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16)})
// PPTPEthUni ME-ID is taken from Mib Upload stored OnuUniPort instance (argument)
meParams := me.ParamData{
EntityID: aInstNo,
Attributes: requestedAttributes,
}
meInstance, omciErr := me.NewPhysicalPathTerminationPointEthernetUni(meParams)
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode PPTPEthUni instance for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize PPTPEthUni-Set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send PPTPEthUni-Set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send PPTPEthUni-Set-msg done")
return meInstance
}
logger.Errorw("Cannot generate PPTPEthUni", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
/* UniG obsolete by now, left here in case it should be needed once again
UniG AdminState anyway should be ignored by ONU acc. to G988
func (oo *omciCC) sendSetUniGLS(ctx context.Context, aInstNo uint16, timeout int,
highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send UNI-G-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16)})
// UNI-G ME-ID is taken from Mib Upload stored OnuUniPort instance (argument)
meParams := me.ParamData{
EntityID: aInstNo,
Attributes: requestedAttributes,
}
meInstance, omciErr := me.NewUniG(meParams)
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode UNI-G instance for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize UNI-G-Set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send UNIG-G-Set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send UNI-G-Set-msg done")
return meInstance
}
logger.Errorw("Cannot generate UNI-G", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
*/
func (oo *omciCC) sendSetVeipLS(ctx context.Context, aInstNo uint16, timeout int,
highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send VEIP-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16)})
// ONU-G ME-ID is defined to be 0, no need to perform a DB lookup
meParams := me.ParamData{
EntityID: aInstNo,
Attributes: requestedAttributes,
}
meInstance, omciErr := me.NewVirtualEthernetInterfacePoint(meParams)
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode VEIP instance for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize VEIP-Set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send VEIP-Set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send VEIP-Set-msg done")
return meInstance
}
logger.Errorw("Cannot generate VEIP", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendGetMe(ctx context.Context, classID me.ClassID, entityID uint16, requestedAttributes me.AttributeValueMap,
timeout int, highPrio bool) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send get-request-msg", log.Fields{"classID": classID, "device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16)})
meParams := me.ParamData{
EntityID: entityID,
Attributes: requestedAttributes,
}
meInstance, omciErr := me.LoadManagedEntityDefinition(classID, meParams)
if omciErr.GetError() == nil {
meClassIDName := meInstance.GetName()
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.GetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorf("Cannot encode instance for get-request", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize get-request", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send get-request-msg", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debugw("send get-request-msg done", log.Fields{"meClassIDName": meClassIDName, "device-id": oo.deviceID})
return meInstance
}
logger.Errorw("Cannot generate meDefinition", log.Fields{"classID": classID, "Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendCreateDot1PMapper(ctx context.Context, timeout int, highPrio bool,
aInstID uint16, rxChan chan Message) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send .1pMapper-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(aInstID), 16)})
meParams := me.ParamData{
EntityID: aInstID,
Attributes: me.AttributeValueMap{},
}
meInstance, omciErr := me.NewIeee8021PMapperServiceProfile(meParams)
if omciErr.GetError() == nil {
//we have to set all 'untouched' parameters to default by some additional option parameter!!
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType,
omci.TransactionID(tid), omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode .1pMapper for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize .1pMapper create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send .1pMapper create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send .1pMapper-create-msg done")
return meInstance
}
logger.Errorw("Cannot generate .1pMapper", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendCreateMBPConfigDataVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send MBPCD-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewMacBridgePortConfigurationData(params[0])
if omciErr.GetError() == nil {
//obviously we have to set all 'untouched' parameters to default by some additional option parameter!!
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType,
omci.TransactionID(tid), omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode MBPCD for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize MBPCD create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send MBPCD create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send MBPCD-Create-msg done")
return meInstance
}
logger.Errorw("Cannot generate MBPCD Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendCreateGemNCTPVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send GemNCTP-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewGemPortNetworkCtp(params[0])
if omciErr.GetError() == nil {
//obviously we have to set all 'untouched' parameters to default by some additional option parameter!!
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType,
omci.TransactionID(tid), omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode GemNCTP for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize GemNCTP create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send GemNCTP create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send GemNCTP-Create-msg done")
return meInstance
}
logger.Errorw("Cannot generate GemNCTP Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendCreateGemIWTPVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send GemIwTp-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewGemInterworkingTerminationPoint(params[0])
if omciErr.GetError() == nil {
//all SetByCreate Parameters (assumed to be) set here, for optimisation no 'AddDefaults'
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType,
omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode GemIwTp for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize GemIwTp create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send GemIwTp create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send GemIwTp-Create-msg done")
return meInstance
}
logger.Errorw("Cannot generate GemIwTp Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendSetTcontVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send TCont-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewTCont(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode TCont for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize TCont set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send TCont set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send TCont-set msg done")
return meInstance
}
logger.Errorw("Cannot generate TCont Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendSetPrioQueueVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send PrioQueue-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewPriorityQueue(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode PrioQueue for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize PrioQueue set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send PrioQueue set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send PrioQueue-set msg done")
return meInstance
}
logger.Errorw("Cannot generate PrioQueue Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendSetDot1PMapperVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send 1PMapper-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewIeee8021PMapperServiceProfile(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode 1PMapper for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize 1PMapper set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send 1PMapper set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send 1PMapper-set msg done")
return meInstance
}
logger.Errorw("Cannot generate 1PMapper Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendCreateVtfdVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send VTFD-Create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewVlanTaggingFilterData(params[0])
if omciErr.GetError() == nil {
//all SetByCreate Parameters (assumed to be) set here, for optimisation no 'AddDefaults'
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType,
omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode VTFD for create", log.Fields{
"Err": err, "device-id": oo.deviceID})
//TODO!!: refactoring improvement requested, here as an example for [VOL-3457]:
// return (dual format) error code that can be used at caller for immediate error treatment
// (relevant to all used sendXX() methods and their error conditions)
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize VTFD create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send VTFD create", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send VTFD-Create-msg done")
return meInstance
}
logger.Errorw("Cannot generate VTFD Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendSetVtfdVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send VTFD-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewVlanTaggingFilterData(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType,
omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode VTFD for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
//TODO!!: refactoring improvement requested, here as an example for [VOL-3457]:
// return (dual format) error code that can be used at caller for immediate error treatment
// (relevant to all used sendXX() methods and their error conditions)
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize VTFD set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send VTFD set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send VTFD-Set-msg done")
return meInstance
}
logger.Errorw("Cannot generate VTFD Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendSetEvtocdVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send EVTOCD-Set-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewExtendedVlanTaggingOperationConfigurationData(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode EVTOCD for set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize EVTOCD set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send EVTOCD set", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send EVTOCD-set msg done")
return meInstance
}
logger.Errorw("Cannot generate EVTOCD Instance", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
func (oo *omciCC) sendDeleteVtfd(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, aInstID uint16) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send VTFD-Delete-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(aInstID), 16)})
meParams := me.ParamData{EntityID: aInstID}
meInstance, omciErr := me.NewVlanTaggingFilterData(meParams)
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.DeleteRequestType,
omci.TransactionID(tid))
if err != nil {
logger.Errorw("Cannot encode VTFD for delete", log.Fields{
"Err": err, "device-id": oo.deviceID})
//TODO!!: refactoring improvement requested, here as an example for [VOL-3457]:
// return (dual format) error code that can be used at caller for immediate error treatment
// (relevant to all used sendXX() methods and their error conditions)
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize VTFD delete", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{
cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send VTFD delete", log.Fields{
"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send VTFD-Delete-msg done")
return meInstance
}
logger.Errorw("Cannot generate VTFD Instance for delete", log.Fields{
"Err": omciErr.GetError(), "device-id": oo.deviceID})
return nil
}
// nolint: unused
func (oo *omciCC) sendCreateMulticastGemIWTPVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send MulticastGemIWTP-create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewMulticastGemInterworkingTerminationPoint(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid),
omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode MulticastGEMIWTP for create", log.Fields{"Err": err, "device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize MulticastGEMIWTP create", log.Fields{"Err": err, "device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send MulticastGEMIWTP create", log.Fields{"Err": err, "device-id": oo.deviceID})
return nil
}
logger.Debug("send MulticastGEMIWTP-create-msg done")
return meInstance
}
logger.Errorw("Cannot generate MulticastGEMIWTP Instance", log.Fields{"Err": omciErr.GetError(),
"device-id": oo.deviceID})
return nil
}
// nolint: unused
func (oo *omciCC) sendCreateMulticastOperationProfileVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send MulticastOperationProfile-create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewMulticastOperationsProfile(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid),
omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode MulticastOperationProfile for create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize MulticastOperationProfile create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send MulticastOperationProfile create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
logger.Debug("send MulticastOperationProfile-create-msg done")
return meInstance
}
logger.Errorw("Cannot generate MulticastOperationProfile Instance", log.Fields{"Err": omciErr.GetError(),
"device-id": oo.deviceID})
return nil
}
// nolint: unused
func (oo *omciCC) sendSetMulticastOperationProfileVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send MulticastOperationProfile-create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewMulticastOperationsProfile(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid),
omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode MulticastOperationProfile for create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize MulticastOperationProfile create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send MulticastOperationProfile create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
logger.Debug("send MulticastOperationProfile-create-msg done")
return meInstance
}
logger.Errorw("Cannot generate MulticastOperationProfile Instance", log.Fields{"Err": omciErr.GetError(),
"device-id": oo.deviceID})
return nil
}
// nolint: unused
func (oo *omciCC) sendCreateMulticastSubConfigInfoVar(ctx context.Context, timeout int, highPrio bool,
rxChan chan Message, params ...me.ParamData) *me.ManagedEntity {
tid := oo.getNextTid(highPrio)
logger.Debugw("send MulticastSubConfigInfo-create-msg:", log.Fields{"device-id": oo.deviceID,
"SequNo": strconv.FormatInt(int64(tid), 16),
"InstId": strconv.FormatInt(int64(params[0].EntityID), 16)})
meInstance, omciErr := me.NewMulticastSubscriberConfigInfo(params[0])
if omciErr.GetError() == nil {
omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid),
omci.AddDefaults(true))
if err != nil {
logger.Errorw("Cannot encode MulticastSubConfigInfo for create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
pkt, err := serializeOmciLayer(omciLayer, msgLayer)
if err != nil {
logger.Errorw("Cannot serialize MulticastSubConfigInfo create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
omciRxCallbackPair := callbackPair{cbKey: tid,
cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse},
}
err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair)
if err != nil {
logger.Errorw("Cannot send MulticastSubConfigInfo create", log.Fields{"Err": err,
"device-id": oo.deviceID})
return nil
}
logger.Debug("send MulticastSubConfigInfo-create-msg done")
return meInstance
}
logger.Errorw("Cannot generate MulticastSubConfigInfo Instance", log.Fields{"Err": omciErr.GetError(),
"device-id": oo.deviceID})
return nil
}