| /* |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| //Package adaptercoreonu provides the utility for onu devices, flows and statistics |
| package adaptercoreonu |
| |
| import ( |
| "container/list" |
| "context" |
| "encoding/binary" |
| "encoding/hex" |
| "errors" |
| "fmt" |
| "strconv" |
| "sync" |
| |
| //"time" |
| |
| "github.com/google/gopacket" |
| // TODO!!! Some references could be resolved auto, but some need specific context .... |
| gp "github.com/google/gopacket" |
| |
| "github.com/opencord/omci-lib-go" |
| me "github.com/opencord/omci-lib-go/generated" |
| "github.com/opencord/voltha-lib-go/v4/pkg/adapters/adapterif" |
| |
| //"github.com/opencord/voltha-lib-go/v4/pkg/kafka" |
| "github.com/opencord/voltha-lib-go/v4/pkg/log" |
| ic "github.com/opencord/voltha-protos/v4/go/inter_container" |
| //"github.com/opencord/voltha-protos/v4/go/openflow_13" |
| //"github.com/opencord/voltha-protos/v4/go/voltha" |
| ) |
| |
| // ### OMCI related definitions - retrieved from Python adapter code/trace #### |
| |
| //ConstDefaultOmciTimeout - Default OMCI Timeout |
| const ConstDefaultOmciTimeout = 10 // ( 3 ?) Seconds |
| |
| const galEthernetEID = uint16(1) |
| const maxGemPayloadSize = uint16(48) |
| const connectivityModeValue = uint8(5) |
| |
| //const defaultTPID = uint16(0x8100) |
| //const broadComDefaultVID = uint16(4091) |
| const macBridgeServiceProfileEID = uint16(0x201) // TODO: most all these need better definition or tuning |
| const ieeeMapperServiceProfileEID = uint16(0x8001) |
| const macBridgePortAniEID = uint16(0x2102) |
| |
| const unusedTcontAllocID = uint16(0xFFFF) //common unused AllocId for G.984 and G.987 systems |
| |
| const cOmciBaseMessageTrailerLen = 40 |
| |
| // tOmciReceiveError - enum type for detected problems/errors in the received OMCI message (format) |
| type tOmciReceiveError uint8 |
| |
| const ( |
| // cOmciMessageReceiveNoError - default start state |
| cOmciMessageReceiveNoError tOmciReceiveError = iota |
| // Error indication wrong trailer length within the message |
| cOmciMessageReceiveErrorTrailerLen |
| // Error indication missing trailer within the message |
| cOmciMessageReceiveErrorMissTrailer |
| ) |
| |
| // ### OMCI related definitions - end |
| |
| //callbackPairEntry to be used for OMCI send/receive correlation |
| type callbackPairEntry struct { |
| cbRespChannel chan Message |
| cbFunction func(context.Context, *omci.OMCI, *gp.Packet, chan Message) error |
| } |
| |
| //callbackPair to be used for ReceiveCallback init |
| type callbackPair struct { |
| cbKey uint16 |
| cbEntry callbackPairEntry |
| } |
| |
| type omciTransferStructure struct { |
| txFrame []byte |
| timeout int |
| retry int |
| highPrio bool |
| } |
| |
| //omciCC structure holds information needed for OMCI communication (to/from OLT Adapter) |
| type omciCC struct { |
| enabled bool |
| pOnuDeviceEntry *OnuDeviceEntry |
| deviceID string |
| pBaseDeviceHandler *deviceHandler |
| coreProxy adapterif.CoreProxy |
| adapterProxy adapterif.AdapterProxy |
| supportExtMsg bool |
| rxOmciFrameError tOmciReceiveError |
| |
| txFrames, txOnuFrames uint32 |
| rxFrames, rxOnuFrames, rxOnuDiscards uint32 |
| |
| // OMCI params |
| mutexTid sync.Mutex |
| tid uint16 |
| mutexHpTid sync.Mutex |
| hpTid uint16 |
| uploadSequNo uint16 |
| uploadNoOfCmds uint16 |
| |
| mutexTxQueue sync.Mutex |
| txQueue *list.List |
| mutexRxSchedMap sync.Mutex |
| rxSchedulerMap map[uint16]callbackPairEntry |
| pLastTxMeInstance *me.ManagedEntity |
| } |
| |
| //newOmciCC constructor returns a new instance of a OmciCC |
| //mib_db (as well as not inluded alarm_db not really used in this code? VERIFY!!) |
| func newOmciCC(ctx context.Context, onuDeviceEntry *OnuDeviceEntry, |
| deviceID string, deviceHandler *deviceHandler, |
| coreProxy adapterif.CoreProxy, adapterProxy adapterif.AdapterProxy) *omciCC { |
| logger.Debugw(ctx, "init-omciCC", log.Fields{"device-id": deviceID}) |
| var omciCC omciCC |
| omciCC.enabled = false |
| omciCC.pOnuDeviceEntry = onuDeviceEntry |
| omciCC.deviceID = deviceID |
| omciCC.pBaseDeviceHandler = deviceHandler |
| omciCC.coreProxy = coreProxy |
| omciCC.adapterProxy = adapterProxy |
| omciCC.supportExtMsg = false |
| omciCC.rxOmciFrameError = cOmciMessageReceiveNoError |
| omciCC.txFrames = 0 |
| omciCC.txOnuFrames = 0 |
| omciCC.rxFrames = 0 |
| omciCC.rxOnuFrames = 0 |
| omciCC.rxOnuDiscards = 0 |
| omciCC.tid = 0x1 |
| omciCC.hpTid = 0x8000 |
| omciCC.uploadSequNo = 0 |
| omciCC.uploadNoOfCmds = 0 |
| |
| omciCC.txQueue = list.New() |
| omciCC.rxSchedulerMap = make(map[uint16]callbackPairEntry) |
| |
| return &omciCC |
| } |
| |
| //stop stops/resets the omciCC |
| func (oo *omciCC) stop(ctx context.Context) error { |
| logger.Debugw(ctx, "omciCC-stopping", log.Fields{"device-id": oo.deviceID}) |
| //reseting all internal data, which might also be helpful for discarding any lingering tx/rx requests |
| oo.mutexTxQueue.Lock() |
| oo.txQueue.Init() // clear the tx queue |
| oo.mutexTxQueue.Unlock() |
| oo.mutexRxSchedMap.Lock() |
| for k := range oo.rxSchedulerMap { |
| delete(oo.rxSchedulerMap, k) //clear the scheduler map |
| } |
| oo.mutexRxSchedMap.Unlock() |
| oo.mutexHpTid.Lock() |
| oo.hpTid = 0x8000 //reset the high prio transactionId |
| oo.mutexHpTid.Unlock() |
| oo.mutexTid.Lock() |
| oo.tid = 1 //reset the low prio transactionId |
| oo.mutexTid.Unlock() |
| //reset control values |
| oo.uploadSequNo = 0 |
| oo.uploadNoOfCmds = 0 |
| oo.rxOmciFrameError = cOmciMessageReceiveNoError |
| //reset the stats counter - which might be topic of discussion ... |
| oo.txFrames = 0 |
| oo.txOnuFrames = 0 |
| oo.rxFrames = 0 |
| oo.rxOnuFrames = 0 |
| oo.rxOnuDiscards = 0 |
| |
| return nil |
| } |
| |
| // Rx handler for omci messages |
| func (oo *omciCC) receiveOnuMessage(ctx context.Context, omciMsg *omci.OMCI) error { |
| logger.Debugw(ctx, "rx-onu-autonomous-message", log.Fields{"omciMsgType": omciMsg.MessageType, |
| "payload": hex.EncodeToString(omciMsg.Payload)}) |
| /* |
| msgType = rxFrame.fields["message_type"] //assumed OmciOperationsValue |
| rxOnuFrames++ |
| |
| switch msgType { |
| case AlarmNotification: |
| { |
| logger.Info("Unhandled: received-onu-alarm-message") |
| // python code was: |
| //if msg_type == EntityOperations.AlarmNotification.value: |
| // topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.Alarm_Notification) |
| // self.reactor.callLater(0, self.event_bus.publish, topic, msg) |
| // |
| return errors.New("RxAlarmNotification unimplemented") |
| } |
| case AttributeValueChange: |
| { |
| logger.Info("Unhandled: received-attribute-value-change") |
| // python code was: |
| //elif msg_type == EntityOperations.AttributeValueChange.value: |
| // topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.AVC_Notification) |
| // self.reactor.callLater(0, self.event_bus.publish, topic, msg) |
| // |
| return errors.New("RxAttributeValueChange unimplemented") |
| } |
| case TestResult: |
| { |
| logger.Info("Unhandled: received-test-result") |
| // python code was: |
| //elif msg_type == EntityOperations.TestResult.value: |
| // topic = OMCI_CC.event_bus_topic(self._device_id, RxEvent.Test_Result) |
| // self.reactor.callLater(0, self.event_bus.publish, topic, msg) |
| // |
| return errors.New("RxTestResult unimplemented") |
| } |
| default: |
| { |
| logger.Errorw(ctx,"rx-onu-unsupported-autonomous-message", log.Fields{"msgType": msgType}) |
| rxOnuDiscards++ |
| return errors.New("RxOnuMsgType unimplemented") |
| } |
| } |
| */ |
| return errors.New("receiveOnuMessage unimplemented") |
| } |
| |
| // Rx handler for onu messages |
| // e.g. would call ReceiveOnuMessage() in case of TID=0 or Action=test ... |
| func (oo *omciCC) receiveMessage(ctx context.Context, rxMsg []byte) error { |
| //logger.Debugw(ctx,"cc-receive-omci-message", log.Fields{"RxOmciMessage-x2s": hex.EncodeToString(rxMsg)}) |
| if len(rxMsg) >= 44 { // then it should normally include the BaseFormat trailer Len |
| // NOTE: autocorrection only valid for OmciBaseFormat, which is not specifically verified here!!! |
| // (an extendedFormat message could be destroyed this way!) |
| trailerLenData := rxMsg[42:44] |
| trailerLen := binary.BigEndian.Uint16(trailerLenData) |
| //logger.Debugw(ctx,"omci-received-trailer-len", log.Fields{"Length": trailerLen}) |
| if trailerLen != cOmciBaseMessageTrailerLen { // invalid base Format entry -> autocorrect |
| binary.BigEndian.PutUint16(rxMsg[42:44], cOmciBaseMessageTrailerLen) |
| if oo.rxOmciFrameError != cOmciMessageReceiveErrorTrailerLen { |
| //do just one error log, expectation is: if seen once it should appear regularly - avoid to many log entries |
| logger.Errorw(ctx, "wrong omci-message trailer length: trailer len auto-corrected", |
| log.Fields{"trailer-length": trailerLen, "device-id": oo.deviceID}) |
| oo.rxOmciFrameError = cOmciMessageReceiveErrorTrailerLen |
| } |
| } |
| } else if len(rxMsg) >= cOmciBaseMessageTrailerLen { // workaround for Adtran OLT Sim, which currently does not send trailer bytes at all! |
| // NOTE: autocorrection only valid for OmciBaseFormat, which is not specifically verified here!!! |
| // (an extendedFormat message could be destroyed this way!) |
| // extend/overwrite with trailer |
| trailer := make([]byte, 8) |
| binary.BigEndian.PutUint16(trailer[2:], cOmciBaseMessageTrailerLen) //set the defined baseline length |
| rxMsg = append(rxMsg[:cOmciBaseMessageTrailerLen], trailer...) |
| if oo.rxOmciFrameError != cOmciMessageReceiveErrorMissTrailer { |
| //do just one error log, expectation is: if seen once it should appear regularly - avoid to many log entries |
| logger.Errorw(ctx, "omci-message to short to include trailer len: trailer auto-corrected (added)", |
| log.Fields{"message-length": len(rxMsg), "device-id": oo.deviceID}) |
| oo.rxOmciFrameError = cOmciMessageReceiveErrorMissTrailer |
| } |
| } else { |
| logger.Errorw(ctx, "received omci-message too small for OmciBaseFormat - abort", |
| log.Fields{"Length": len(rxMsg), "device-id": oo.deviceID}) |
| return fmt.Errorf("rxOmciMessage too small for BaseFormat %s", oo.deviceID) |
| } |
| |
| packet := gopacket.NewPacket(rxMsg, omci.LayerTypeOMCI, gopacket.NoCopy) |
| if packet == nil { |
| logger.Errorw(ctx, "omci-message could not be decoded", log.Fields{"device-id": oo.deviceID}) |
| return fmt.Errorf("could not decode rxMsg as OMCI %s", oo.deviceID) |
| } |
| omciLayer := packet.Layer(omci.LayerTypeOMCI) |
| if omciLayer == nil { |
| logger.Errorw(ctx, "omci-message could not decode omci layer", log.Fields{"device-id": oo.deviceID}) |
| return fmt.Errorf("could not decode omci layer %s", oo.deviceID) |
| } |
| omciMsg, ok := omciLayer.(*omci.OMCI) |
| if !ok { |
| logger.Errorw(ctx, "omci-message could not assign omci layer", log.Fields{"device-id": oo.deviceID}) |
| return fmt.Errorf("could not assign omci layer %s", oo.deviceID) |
| } |
| logger.Debugw(ctx, "omci-message-decoded:", log.Fields{"omciMsgType": omciMsg.MessageType, |
| "transCorrId": strconv.FormatInt(int64(omciMsg.TransactionID), 16), "DeviceIdent": omciMsg.DeviceIdentifier}) |
| if byte(omciMsg.MessageType)&me.AK == 0 { |
| // Not a response |
| logger.Debug(ctx, "RxMsg is no Omci Response Message") |
| if omciMsg.TransactionID == 0 { |
| return oo.receiveOnuMessage(ctx, omciMsg) |
| } |
| logger.Errorw(ctx, "Unexpected TransCorrId != 0 not accepted for autonomous messages", |
| log.Fields{"msgType": omciMsg.MessageType, "payload": hex.EncodeToString(omciMsg.Payload), |
| "device-id": oo.deviceID}) |
| return fmt.Errorf("autonomous Omci Message with TranSCorrId != 0 not acccepted %s", oo.deviceID) |
| |
| } |
| //logger.Debug(ctx,"RxMsg is a Omci Response Message: try to schedule it to the requester") |
| oo.mutexRxSchedMap.Lock() |
| rxCallbackEntry, ok := oo.rxSchedulerMap[omciMsg.TransactionID] |
| if ok && rxCallbackEntry.cbFunction != nil { |
| //disadvantage of decoupling: error verification made difficult, but anyway the question is |
| // how to react on erroneous frame reception, maybe can simply be ignored |
| go rxCallbackEntry.cbFunction(ctx, omciMsg, &packet, rxCallbackEntry.cbRespChannel) |
| |
| // having posted the response the request is regarded as 'done' |
| delete(oo.rxSchedulerMap, omciMsg.TransactionID) |
| oo.mutexRxSchedMap.Unlock() |
| } else { |
| oo.mutexRxSchedMap.Unlock() |
| logger.Errorw(ctx, "omci-message-response for not registered transCorrId", log.Fields{"device-id": oo.deviceID}) |
| return fmt.Errorf("could not find registered response handler tor transCorrId %s", oo.deviceID) |
| } |
| |
| return nil |
| } |
| |
| /* |
| func (oo *omciCC) publishRxResponseFrame(ctx context.Context, txFrame []byte, rxFrame []byte) error { |
| return errors.New("publishRxResponseFrame unimplemented") |
| //def _publish_rx_frame(self, tx_frame, rx_frame): |
| } |
| */ |
| |
| //Queue the OMCI Frame for a transmit to the ONU via the proxy_channel |
| func (oo *omciCC) send(ctx context.Context, txFrame []byte, timeout int, retry int, highPrio bool, |
| receiveCallbackPair callbackPair) error { |
| |
| logger.Debugw(ctx, "register-response-callback:", log.Fields{"for TansCorrId": receiveCallbackPair.cbKey}) |
| // it could be checked, if the callback keay is already registered - but simply overwrite may be acceptable ... |
| oo.mutexRxSchedMap.Lock() |
| oo.rxSchedulerMap[receiveCallbackPair.cbKey] = receiveCallbackPair.cbEntry |
| oo.mutexRxSchedMap.Unlock() |
| |
| //just use a simple list for starting - might need some more effort, especially for multi source write access |
| omciTxRequest := omciTransferStructure{ |
| txFrame, |
| timeout, |
| retry, |
| highPrio, |
| } |
| oo.mutexTxQueue.Lock() |
| oo.txQueue.PushBack(omciTxRequest) // enqueue |
| oo.mutexTxQueue.Unlock() |
| |
| // for first test just bypass and send directly: |
| go oo.sendNextRequest(ctx) |
| return nil |
| } |
| |
| //Pull next tx request and send it |
| func (oo *omciCC) sendNextRequest(ctx context.Context) error { |
| // return errors.New("sendNextRequest unimplemented") |
| |
| // just try to get something transferred !! |
| // avoid accessing the txQueue from parallel send requests |
| // block parallel omci send requests at least until SendIAP is 'committed' |
| // that should be feasible for an onu instance as on OMCI anyway window size 1 is assumed |
| oo.mutexTxQueue.Lock() |
| defer oo.mutexTxQueue.Unlock() |
| for oo.txQueue.Len() > 0 { |
| queueElement := oo.txQueue.Front() // First element |
| omciTxRequest := queueElement.Value.(omciTransferStructure) |
| /* compare olt device handler code: |
| func (dh *DeviceHandler) omciIndication(omciInd *oop.OmciIndication) { |
| logger.Debugw(ctx,"omci indication", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId}) |
| var deviceType string |
| var deviceID string |
| var proxyDeviceID string |
| |
| onuKey := dh.formOnuKey(omciInd.IntfId, omciInd.OnuId) |
| |
| if onuInCache, ok := dh.onus.Load(onuKey); !ok { |
| |
| logger.Debugw(ctx,"omci indication for a device not in cache.", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId}) |
| ponPort := IntfIDToPortNo(omciInd.GetIntfId(), voltha.Port_PON_OLT) |
| kwargs := make(map[string]interface{}) |
| kwargs["onu_id"] = omciInd.OnuId |
| kwargs["parent_port_no"] = ponPort |
| |
| onuDevice, err := dh.coreProxy.GetChildDevice(log.WithSpanFromContext(context.TODO(), ctx), dh.device.Id, kwargs) |
| if err != nil { |
| logger.Errorw(ctx,"onu not found", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId, "error": err}) |
| return |
| } |
| deviceType = onuDevice.Type |
| deviceID = onuDevice.Id |
| proxyDeviceID = onuDevice.ProxyAddress.DeviceId |
| //if not exist in cache, then add to cache. |
| dh.onus.Store(onuKey, NewOnuDevice(deviceID, deviceType, onuDevice.SerialNumber, omciInd.OnuId, omciInd.IntfId, proxyDeviceID)) |
| } else { |
| //found in cache |
| logger.Debugw(ctx,"omci indication for a device in cache.", log.Fields{"intfID": omciInd.IntfId, "onuID": omciInd.OnuId}) |
| deviceType = onuInCache.(*OnuDevice).deviceType |
| deviceID = onuInCache.(*OnuDevice).deviceID |
| proxyDeviceID = onuInCache.(*OnuDevice).proxyDeviceID |
| } |
| */ |
| /* and compare onu_adapter py code: |
| omci_msg = InterAdapterOmciMessage( |
| message=bytes(frame), |
| proxy_address=self._proxy_address, |
| connect_status=self._device.connect_status) |
| |
| self.logger.debug('sent-omci-msg', tid=tx_tid, omci_msg=hexlify(bytes(frame))) |
| |
| yield self._adapter_proxy.send_inter_adapter_message( |
| msg=omci_msg, |
| type=InterAdapterMessageType.OMCI_REQUEST, |
| from_adapter=self._device.type, |
| to_adapter=self._proxy_address.device_type, |
| to_device_id=self._device_id, |
| proxy_device_id=self._proxy_address.device_id |
| ) |
| */ |
| device, err := oo.coreProxy.GetDevice(ctx, |
| oo.pBaseDeviceHandler.deviceID, oo.deviceID) //parent, child |
| if err != nil || device == nil { |
| /*TODO: needs to handle error scenarios */ |
| logger.Errorw(ctx, "Failed to fetch device", log.Fields{"err": err, "ParentId": oo.pBaseDeviceHandler.deviceID, |
| "ChildId": oo.deviceID}) |
| return fmt.Errorf("failed to fetch device %s", oo.deviceID) |
| } |
| |
| logger.Debugw(ctx, "omci-message-to-send:", log.Fields{ |
| "TxOmciMessage": hex.EncodeToString(omciTxRequest.txFrame), |
| "device-id": oo.deviceID, |
| "toDeviceType": oo.pBaseDeviceHandler.ProxyAddressType, |
| "proxyDeviceID": oo.pBaseDeviceHandler.ProxyAddressID}) |
| |
| omciMsg := &ic.InterAdapterOmciMessage{Message: omciTxRequest.txFrame} |
| if sendErr := oo.adapterProxy.SendInterAdapterMessage(log.WithSpanFromContext(context.Background(), ctx), omciMsg, |
| ic.InterAdapterMessageType_OMCI_REQUEST, |
| //fromTopic,toType,toDevId, ProxyDevId |
| oo.pOnuDeviceEntry.baseDeviceHandler.pOpenOnuAc.config.Topic, oo.pBaseDeviceHandler.ProxyAddressType, |
| oo.deviceID, oo.pBaseDeviceHandler.ProxyAddressID, ""); sendErr != nil { |
| logger.Errorw(ctx, "send omci request error", log.Fields{"ChildId": oo.deviceID, "error": sendErr}) |
| return sendErr |
| } |
| oo.txQueue.Remove(queueElement) // Dequeue |
| } |
| return nil |
| } |
| |
| func (oo *omciCC) getNextTid(highPriority bool) uint16 { |
| var next uint16 |
| if highPriority { |
| oo.mutexHpTid.Lock() |
| next = oo.hpTid |
| oo.hpTid++ |
| if oo.hpTid < 0x8000 { |
| oo.hpTid = 0x8000 |
| } |
| oo.mutexHpTid.Unlock() |
| } else { |
| oo.mutexTid.Lock() |
| next = oo.tid |
| oo.tid++ |
| if oo.tid >= 0x8000 { |
| oo.tid = 1 |
| } |
| oo.mutexTid.Unlock() |
| } |
| return next |
| } |
| |
| // ################################################################################### |
| // # utility methods provided to work on OMCI messages |
| func serialize(ctx context.Context, msgType omci.MessageType, request gopacket.SerializableLayer, tid uint16) ([]byte, error) { |
| omciLayer := &omci.OMCI{ |
| TransactionID: tid, |
| MessageType: msgType, |
| } |
| return serializeOmciLayer(ctx, omciLayer, request) |
| } |
| |
| func serializeOmciLayer(ctx context.Context, aOmciLayer *omci.OMCI, aRequest gopacket.SerializableLayer) ([]byte, error) { |
| var options gopacket.SerializeOptions |
| options.FixLengths = true |
| |
| buffer := gopacket.NewSerializeBuffer() |
| err := gopacket.SerializeLayers(buffer, options, aOmciLayer, aRequest) |
| if err != nil { |
| logger.Errorw(ctx, "Could not create goPacket Omci serial buffer", log.Fields{"Err": err}) |
| return nil, err |
| } |
| return buffer.Bytes(), nil |
| } |
| |
| /* |
| func hexEncode(omciPkt []byte) ([]byte, error) { |
| dst := make([]byte, hex.EncodedLen(len(omciPkt))) |
| hex.Encode(dst, omciPkt) |
| return dst, nil |
| } |
| */ |
| |
| //supply a response handler for omci response messages to be transferred to the requested FSM |
| func (oo *omciCC) receiveOmciResponse(ctx context.Context, omciMsg *omci.OMCI, packet *gp.Packet, respChan chan Message) error { |
| |
| logger.Debugw(ctx, "omci-message-response - transfer on omciRespChannel", log.Fields{"omciMsgType": omciMsg.MessageType, |
| "transCorrId": strconv.FormatInt(int64(omciMsg.TransactionID), 16), "device-id": oo.deviceID}) |
| |
| if oo.pOnuDeviceEntry == nil { |
| logger.Errorw(ctx, "Abort receiving OMCI response, DeviceEntryPointer is nil", log.Fields{ |
| "device-id": oo.deviceID}) |
| return fmt.Errorf("deviceEntryPointer is nil %s", oo.deviceID) |
| } |
| |
| // no further test on SeqNo is done here, assignment from rxScheduler is trusted |
| // MibSync responses are simply transferred via deviceEntry to MibSync, no specific analysis here |
| omciRespMsg := Message{ |
| Type: OMCI, |
| Data: OmciMessage{ |
| OmciMsg: omciMsg, |
| OmciPacket: packet, |
| }, |
| } |
| //logger.Debugw(ctx,"Message to be sent into channel:", log.Fields{"mibSyncMsg": mibSyncMsg}) |
| respChan <- omciRespMsg |
| |
| return nil |
| } |
| |
| func (oo *omciCC) sendMibReset(ctx context.Context, timeout int, highPrio bool) error { |
| |
| logger.Debugw(ctx, "send MibReset-msg to:", log.Fields{"device-id": oo.deviceID}) |
| request := &omci.MibResetRequest{ |
| MeBasePacket: omci.MeBasePacket{ |
| EntityClass: me.OnuDataClassID, |
| }, |
| } |
| tid := oo.getNextTid(highPrio) |
| pkt, err := serialize(ctx, omci.MibResetRequestType, request, tid) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MibResetRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| return oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| } |
| |
| func (oo *omciCC) sendReboot(ctx context.Context, timeout int, highPrio bool, responseChannel chan Message) error { |
| logger.Debugw(ctx, "send Reboot-msg to:", log.Fields{"device-id": oo.deviceID}) |
| request := &omci.RebootRequest{ |
| MeBasePacket: omci.MeBasePacket{ |
| EntityClass: me.OnuGClassID, |
| }, |
| } |
| tid := oo.getNextTid(highPrio) |
| pkt, err := serialize(ctx, omci.RebootRequestType, request, tid) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize RebootRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{oo.pOnuDeviceEntry.omciRebootMessageReceivedChannel, oo.receiveOmciResponse}, |
| } |
| |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send RebootRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| err = oo.pOnuDeviceEntry.waitForRebootResponse(ctx, responseChannel) |
| if err != nil { |
| logger.Errorw(ctx, "aborting ONU Reboot!", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| return nil |
| } |
| |
| func (oo *omciCC) sendMibUpload(ctx context.Context, timeout int, highPrio bool) error { |
| logger.Debugw(ctx, "send MibUpload-msg to:", log.Fields{"device-id": oo.deviceID}) |
| request := &omci.MibUploadRequest{ |
| MeBasePacket: omci.MeBasePacket{ |
| EntityClass: me.OnuDataClassID, |
| }, |
| } |
| tid := oo.getNextTid(highPrio) |
| pkt, err := serialize(ctx, omci.MibUploadRequestType, request, tid) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MibUploadRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| oo.uploadSequNo = 0 |
| oo.uploadNoOfCmds = 0 |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| return oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| } |
| |
| func (oo *omciCC) sendMibUploadNext(ctx context.Context, timeout int, highPrio bool) error { |
| logger.Debugw(ctx, "send MibUploadNext-msg to:", log.Fields{"device-id": oo.deviceID, "uploadSequNo": oo.uploadSequNo}) |
| request := &omci.MibUploadNextRequest{ |
| MeBasePacket: omci.MeBasePacket{ |
| EntityClass: me.OnuDataClassID, |
| }, |
| CommandSequenceNumber: oo.uploadSequNo, |
| } |
| tid := oo.getNextTid(highPrio) |
| pkt, err := serialize(ctx, omci.MibUploadNextRequestType, request, tid) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MibUploadNextRequest", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return err |
| } |
| oo.uploadSequNo++ |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| return oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| } |
| |
| func (oo *omciCC) sendCreateGalEthernetProfile(ctx context.Context, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send GalEnetProfile-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: galEthernetEID, |
| Attributes: me.AttributeValueMap{"MaximumGemPayloadSize": maxGemPayloadSize}, |
| } |
| meInstance, omciErr := me.NewGalEthernetProfile(meParams) |
| if omciErr.GetError() == nil { |
| //all setByCreate parameters already set, no default option required ... |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode GalEnetProfileInstance for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize GalEnetProfile create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send GalEnetProfile create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send GalEnetProfile-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate GalEnetProfileInstance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| // might be needed to extend for parameter arguments, here just for setting the ConnectivityMode!! |
| func (oo *omciCC) sendSetOnu2g(ctx context.Context, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send ONU2-G-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // ONU-G ME-ID is defined to be 0, but we could verify, if the ONU really supports the desired |
| // connectivity mode 5 (in ConnCap) |
| // By now we just use fix values to fire - this is anyway what the python adapter does |
| // read ONU-2G from DB ???? //TODO!!! |
| meParams := me.ParamData{ |
| EntityID: 0, |
| Attributes: me.AttributeValueMap{"CurrentConnectivityMode": connectivityModeValue}, |
| } |
| meInstance, omciErr := me.NewOnu2G(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode ONU2-G instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize ONU2-G set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send ONU2-G set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send ONU2-G-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate ONU2-G", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateMBServiceProfile(ctx context.Context, |
| aPUniPort *onuUniPort, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| instID := macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo) |
| logger.Debugw(ctx, "send MBSP-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: instID, |
| Attributes: me.AttributeValueMap{ |
| "Priority": 0x8000, |
| "MaxAge": 20 * 256, //20s |
| "HelloTime": 2 * 256, //2s |
| "ForwardDelay": 15 * 256, //15s |
| "DynamicFilteringAgeingTime": 0, |
| }, |
| } |
| |
| meInstance, omciErr := me.NewMacBridgeServiceProfile(meParams) |
| if omciErr.GetError() == nil { |
| //obviously we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MBSP for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MBSP create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MBSP create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MBSP-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MBSP Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateMBPConfigData(ctx context.Context, |
| aPUniPort *onuUniPort, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| instID := macBridgePortAniEID + aPUniPort.entityID |
| logger.Debugw(ctx, "send MBPCD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: instID, |
| Attributes: me.AttributeValueMap{ |
| "BridgeIdPointer": macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo), |
| "PortNum": aPUniPort.macBpNo, |
| "TpType": uint8(aPUniPort.portType), |
| "TpPointer": aPUniPort.entityID, |
| }, |
| } |
| meInstance, omciErr := me.NewMacBridgePortConfigurationData(meParams) |
| if omciErr.GetError() == nil { |
| //obviously we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MBPCD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MBPCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MBPCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MBPCD-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MBPCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateEVTOConfigData(ctx context.Context, |
| aPUniPort *onuUniPort, timeout int, highPrio bool) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| //same entityId is used as for MBSP (see there), but just arbitrary ... |
| instID := macBridgeServiceProfileEID + uint16(aPUniPort.macBpNo) |
| logger.Debugw(ctx, "send EVTOCD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(instID), 16)}) |
| |
| // compare python adapter code WA VOL-1311: this is not done here! |
| // (setting TPID values for the create would probably anyway be ignored by the omci lib) |
| // but perhaps we have to be aware of possible problems at get(Next) Request handling for EVTOOCD tables later ... |
| assType := uint8(2) // default AssociationType is PPTPEthUni |
| if aPUniPort.portType == uniVEIP { |
| assType = uint8(10) // for VEIP |
| } |
| meParams := me.ParamData{ |
| EntityID: instID, |
| Attributes: me.AttributeValueMap{ |
| "AssociationType": assType, |
| "AssociatedMePointer": aPUniPort.entityID, |
| }, |
| } |
| meInstance, omciErr := me.NewExtendedVlanTaggingOperationConfigurationData(meParams) |
| if omciErr.GetError() == nil { |
| //all setByCreate parameters already set, no default option required ... |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode EVTOCD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize EVTOCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibDownloadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send EVTOCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send EVTOCD-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate EVTOCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendSetOnuGLS(ctx context.Context, timeout int, |
| highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send ONU-G-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // ONU-G ME-ID is defined to be 0, no need to perform a DB lookup |
| meParams := me.ParamData{ |
| EntityID: 0, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.NewOnuG(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode ONU-G instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize ONU-G set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send ONU-G set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send ONU-G-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate ONU-G", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendSetPptpEthUniLS(ctx context.Context, aInstNo uint16, timeout int, |
| highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send PPTPEthUni-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // PPTPEthUni ME-ID is taken from Mib Upload stored OnuUniPort instance (argument) |
| meParams := me.ParamData{ |
| EntityID: aInstNo, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.NewPhysicalPathTerminationPointEthernetUni(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode PPTPEthUni instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize PPTPEthUni-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send PPTPEthUni-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send PPTPEthUni-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate PPTPEthUni", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| /* UniG obsolete by now, left here in case it should be needed once again |
| UniG AdminState anyway should be ignored by ONU acc. to G988 |
| func (oo *omciCC) sendSetUniGLS(ctx context.Context, aInstNo uint16, timeout int, |
| highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx,"send UNI-G-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // UNI-G ME-ID is taken from Mib Upload stored OnuUniPort instance (argument) |
| meParams := me.ParamData{ |
| EntityID: aInstNo, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.NewUniG(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx,"Cannot encode UNI-G instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx,"Cannot serialize UNI-G-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx,"Cannot send UNIG-G-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx,"send UNI-G-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx,"Cannot generate UNI-G", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| */ |
| |
| func (oo *omciCC) sendSetVeipLS(ctx context.Context, aInstNo uint16, timeout int, |
| highPrio bool, requestedAttributes me.AttributeValueMap, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send VEIP-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| // ONU-G ME-ID is defined to be 0, no need to perform a DB lookup |
| meParams := me.ParamData{ |
| EntityID: aInstNo, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.NewVirtualEthernetInterfacePoint(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode VEIP instance for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize VEIP-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send VEIP-Set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send VEIP-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate VEIP", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendGetMe(ctx context.Context, classID me.ClassID, entityID uint16, requestedAttributes me.AttributeValueMap, |
| timeout int, highPrio bool) *me.ManagedEntity { |
| |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send get-request-msg", log.Fields{"classID": classID, "device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: entityID, |
| Attributes: requestedAttributes, |
| } |
| meInstance, omciErr := me.LoadManagedEntityDefinition(classID, meParams) |
| if omciErr.GetError() == nil { |
| meClassIDName := meInstance.GetName() |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.GetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorf(ctx, "Cannot encode instance for get-request", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize get-request", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{(*oo.pOnuDeviceEntry).pMibUploadFsm.commChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send get-request-msg", log.Fields{"meClassIDName": meClassIDName, "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debugw(ctx, "send get-request-msg done", log.Fields{"meClassIDName": meClassIDName, "device-id": oo.deviceID}) |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate meDefinition", log.Fields{"classID": classID, "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateDot1PMapper(ctx context.Context, timeout int, highPrio bool, |
| aInstID uint16, rxChan chan Message) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send .1pMapper-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), "InstId": strconv.FormatInt(int64(aInstID), 16)}) |
| |
| meParams := me.ParamData{ |
| EntityID: aInstID, |
| Attributes: me.AttributeValueMap{}, |
| } |
| meInstance, omciErr := me.NewIeee8021PMapperServiceProfile(meParams) |
| if omciErr.GetError() == nil { |
| //we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode .1pMapper for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize .1pMapper create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send .1pMapper create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send .1pMapper-create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate .1pMapper", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateMBPConfigDataVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send MBPCD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewMacBridgePortConfigurationData(params[0]) |
| if omciErr.GetError() == nil { |
| //obviously we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MBPCD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MBPCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MBPCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MBPCD-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MBPCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateGemNCTPVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send GemNCTP-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewGemPortNetworkCtp(params[0]) |
| if omciErr.GetError() == nil { |
| //obviously we have to set all 'untouched' parameters to default by some additional option parameter!! |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid), omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode GemNCTP for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize GemNCTP create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send GemNCTP create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send GemNCTP-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate GemNCTP Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateGemIWTPVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send GemIwTp-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewGemInterworkingTerminationPoint(params[0]) |
| if omciErr.GetError() == nil { |
| //all SetByCreate Parameters (assumed to be) set here, for optimisation no 'AddDefaults' |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode GemIwTp for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize GemIwTp create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send GemIwTp create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send GemIwTp-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate GemIwTp Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendSetTcontVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send TCont-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewTCont(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode TCont for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize TCont set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send TCont set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send TCont-set msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate TCont Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendSetPrioQueueVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send PrioQueue-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewPriorityQueue(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode PrioQueue for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize PrioQueue set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send PrioQueue set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send PrioQueue-set msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate PrioQueue Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendSetDot1PMapperVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send 1PMapper-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewIeee8021PMapperServiceProfile(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode 1PMapper for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize 1PMapper set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send 1PMapper set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send 1PMapper-set msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate 1PMapper Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateVtfdVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send VTFD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewVlanTaggingFilterData(params[0]) |
| if omciErr.GetError() == nil { |
| //all SetByCreate Parameters (assumed to be) set here, for optimisation no 'AddDefaults' |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode VTFD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // return (dual format) error code that can be used at caller for immediate error treatment |
| // (relevant to all used sendXX() methods and their error conditions) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize VTFD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send VTFD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send VTFD-Create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate VTFD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| // nolint: unused |
| func (oo *omciCC) sendSetVtfdVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send VTFD-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewVlanTaggingFilterData(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode VTFD for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // return (dual format) error code that can be used at caller for immediate error treatment |
| // (relevant to all used sendXX() methods and their error conditions) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize VTFD set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send VTFD set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send VTFD-Set-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate VTFD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendCreateEvtocdVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send EVTOCD-Create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewExtendedVlanTaggingOperationConfigurationData(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode EVTOCD for create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize EVTOCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send EVTOCD create", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send EVTOCD-set msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate EVTOCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendSetEvtocdVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send EVTOCD-Set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewExtendedVlanTaggingOperationConfigurationData(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode EVTOCD for set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize EVTOCD set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send EVTOCD set", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send EVTOCD-set msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate EVTOCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendDeleteEvtocd(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send EVTOCD-Delete-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewExtendedVlanTaggingOperationConfigurationData(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.DeleteRequestType, omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode EVTOCD for delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize EVTOCD delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send EVTOCD delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send EVTOCD-delete msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate EVTOCD Instance", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendDeleteVtfd(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, aInstID uint16) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send VTFD-Delete-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(aInstID), 16)}) |
| |
| meParams := me.ParamData{EntityID: aInstID} |
| meInstance, omciErr := me.NewVlanTaggingFilterData(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.DeleteRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode VTFD for delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // return (dual format) error code that can be used at caller for immediate error treatment |
| // (relevant to all used sendXX() methods and their error conditions) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize VTFD delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send VTFD delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send VTFD-Delete-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate VTFD Instance for delete", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendDeleteGemIWTP(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, aInstID uint16) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send GemIwTp-Delete-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(aInstID), 16)}) |
| |
| meParams := me.ParamData{EntityID: aInstID} |
| meInstance, omciErr := me.NewGemInterworkingTerminationPoint(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.DeleteRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode GemIwTp for delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // return (dual format) error code that can be used at caller for immediate error treatment |
| // (relevant to all used sendXX() methods and their error conditions) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize GemIwTp delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send GemIwTp delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send GemIwTp-Delete-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate GemIwTp Instance for delete", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendDeleteGemNCTP(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, aInstID uint16) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send GemNCtp-Delete-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(aInstID), 16)}) |
| |
| meParams := me.ParamData{EntityID: aInstID} |
| meInstance, omciErr := me.NewGemPortNetworkCtp(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.DeleteRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode GemNCtp for delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // return (dual format) error code that can be used at caller for immediate error treatment |
| // (relevant to all used sendXX() methods and their error conditions) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize GemNCtp delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send GemNCtp delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send GemNCtp-Delete-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate GemNCtp Instance for delete", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendDeleteDot1PMapper(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, aInstID uint16) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send .1pMapper-Delete-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(aInstID), 16)}) |
| |
| meParams := me.ParamData{EntityID: aInstID} |
| meInstance, omciErr := me.NewIeee8021PMapperServiceProfile(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.DeleteRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode .1pMapper for delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // return (dual format) error code that can be used at caller for immediate error treatment |
| // (relevant to all used sendXX() methods and their error conditions) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize .1pMapper delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send .1pMapper delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send .1pMapper-Delete-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate .1pMapper Instance for delete", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| func (oo *omciCC) sendDeleteMBPConfigData(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, aInstID uint16) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send MBPCD-Delete-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(aInstID), 16)}) |
| |
| meParams := me.ParamData{EntityID: aInstID} |
| meInstance, omciErr := me.NewMacBridgePortConfigurationData(meParams) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.DeleteRequestType, |
| omci.TransactionID(tid)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MBPCD for delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| //TODO!!: refactoring improvement requested, here as an example for [VOL-3457]: |
| // return (dual format) error code that can be used at caller for immediate error treatment |
| // (relevant to all used sendXX() methods and their error conditions) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MBPCD delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{ |
| cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MBPCD delete", log.Fields{ |
| "Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MBPCD-Delete-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MBPCD Instance for delete", log.Fields{ |
| "Err": omciErr.GetError(), "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| // nolint: unused |
| func (oo *omciCC) sendCreateMulticastGemIWTPVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send MulticastGemIWTP-create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewMulticastGemInterworkingTerminationPoint(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid), |
| omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MulticastGEMIWTP for create", log.Fields{"Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MulticastGEMIWTP create", log.Fields{"Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MulticastGEMIWTP create", log.Fields{"Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MulticastGEMIWTP-create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MulticastGEMIWTP Instance", log.Fields{"Err": omciErr.GetError(), |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| // nolint: unused |
| func (oo *omciCC) sendSetMulticastGemIWTPVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send MulticastGemIWTP-set-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewMulticastGemInterworkingTerminationPoint(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid), |
| omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MulticastGEMIWTP for set", log.Fields{"Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MulticastGEMIWTP create", log.Fields{"Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MulticastGEMIWTP set", log.Fields{"Err": err, "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MulticastGEMIWTP-set-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MulticastGEMIWTP Instance", log.Fields{"Err": omciErr.GetError(), |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| // nolint: unused |
| func (oo *omciCC) sendCreateMulticastOperationProfileVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send MulticastOperationProfile-create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewMulticastOperationsProfile(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid), |
| omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MulticastOperationProfile for create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MulticastOperationProfile create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MulticastOperationProfile create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MulticastOperationProfile-create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MulticastOperationProfile Instance", log.Fields{"Err": omciErr.GetError(), |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| // nolint: unused |
| func (oo *omciCC) sendSetMulticastOperationProfileVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send MulticastOperationProfile-create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewMulticastOperationsProfile(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.SetRequestType, omci.TransactionID(tid), |
| omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MulticastOperationProfile for create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MulticastOperationProfile create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MulticastOperationProfile create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MulticastOperationProfile-create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MulticastOperationProfile Instance", log.Fields{"Err": omciErr.GetError(), |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| // nolint: unused |
| func (oo *omciCC) sendCreateMulticastSubConfigInfoVar(ctx context.Context, timeout int, highPrio bool, |
| rxChan chan Message, params ...me.ParamData) *me.ManagedEntity { |
| tid := oo.getNextTid(highPrio) |
| logger.Debugw(ctx, "send MulticastSubConfigInfo-create-msg:", log.Fields{"device-id": oo.deviceID, |
| "SequNo": strconv.FormatInt(int64(tid), 16), |
| "InstId": strconv.FormatInt(int64(params[0].EntityID), 16)}) |
| |
| meInstance, omciErr := me.NewMulticastSubscriberConfigInfo(params[0]) |
| if omciErr.GetError() == nil { |
| omciLayer, msgLayer, err := omci.EncodeFrame(meInstance, omci.CreateRequestType, omci.TransactionID(tid), |
| omci.AddDefaults(true)) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot encode MulticastSubConfigInfo for create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| pkt, err := serializeOmciLayer(ctx, omciLayer, msgLayer) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot serialize MulticastSubConfigInfo create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| |
| omciRxCallbackPair := callbackPair{cbKey: tid, |
| cbEntry: callbackPairEntry{rxChan, oo.receiveOmciResponse}, |
| } |
| err = oo.send(ctx, pkt, timeout, 0, highPrio, omciRxCallbackPair) |
| if err != nil { |
| logger.Errorw(ctx, "Cannot send MulticastSubConfigInfo create", log.Fields{"Err": err, |
| "device-id": oo.deviceID}) |
| return nil |
| } |
| logger.Debug(ctx, "send MulticastSubConfigInfo-create-msg done") |
| return meInstance |
| } |
| logger.Errorw(ctx, "Cannot generate MulticastSubConfigInfo Instance", log.Fields{"Err": omciErr.GetError(), |
| "device-id": oo.deviceID}) |
| return nil |
| } |