blob: 3a2ada0dabacac65f538bef2cbf5a87fb2abd64c [file] [log] [blame]
# Copyright 2017-present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# sourcing this file is needed to make local development and integration testing work
# load local python virtualenv if exists
### Bandit config file generated from:
# '/usr/local/bin/bandit-config-generator -o .bandit.yaml'
### This config may optionally select a subset of tests to run or skip by
### filling out the 'tests' and 'skips' lists given below. If no tests are
### specified for inclusion then it is assumed all tests are desired. The skips
### set will remove specific tests from the include set. This can be controlled
### using the -t/-s CLI options. Note that the same test ID should not appear
### in both 'tests' and 'skips', this would be nonsensical and is detected by
### Bandit at runtime.
# Available tests:
# B101 : assert_used
# B102 : exec_used
# B103 : set_bad_file_permissions
# B104 : hardcoded_bind_all_interfaces
# B105 : hardcoded_password_string
# B106 : hardcoded_password_funcarg
# B107 : hardcoded_password_default
# B108 : hardcoded_tmp_directory
# B110 : try_except_pass
# B112 : try_except_continue
# B201 : flask_debug_true
# B301 : pickle
# B302 : marshal
# B303 : md5
# B304 : ciphers
# B305 : cipher_modes
# B306 : mktemp_q
# B307 : eval
# B308 : mark_safe
# B309 : httpsconnection
# B310 : urllib_urlopen
# B311 : random
# B312 : telnetlib
# B313 : xml_bad_cElementTree
# B314 : xml_bad_ElementTree
# B315 : xml_bad_expatreader
# B316 : xml_bad_expatbuilder
# B317 : xml_bad_sax
# B318 : xml_bad_minidom
# B319 : xml_bad_pulldom
# B320 : xml_bad_etree
# B321 : ftplib
# B322 : input
# B323 : unverified_context
# B324 : hashlib_new_insecure_functions
# B325 : tempnam
# B401 : import_telnetlib
# B402 : import_ftplib
# B403 : import_pickle
# B404 : import_subprocess
# B405 : import_xml_etree
# B406 : import_xml_sax
# B407 : import_xml_expat
# B408 : import_xml_minidom
# B409 : import_xml_pulldom
# B410 : import_lxml
# B411 : import_xmlrpclib
# B412 : import_httpoxy
# B413 : import_pycrypto
# B501 : request_with_no_cert_validation
# B502 : ssl_with_bad_version
# B503 : ssl_with_bad_defaults
# B504 : ssl_with_no_version
# B505 : weak_cryptographic_key
# B506 : yaml_load
# B507 : ssh_no_host_key_verification
# B601 : paramiko_calls
# B602 : subprocess_popen_with_shell_equals_true
# B603 : subprocess_without_shell_equals_true
# B604 : any_other_function_with_shell_equals_true
# B605 : start_process_with_a_shell
# B606 : start_process_with_no_shell
# B607 : start_process_with_partial_path
# B608 : hardcoded_sql_expressions
# B609 : linux_commands_wildcard_injection
# B610 : django_extra_used
# B611 : django_rawsql_used
# B701 : jinja2_autoescape_false
# B702 : use_of_mako_templates
# B703 : django_mark_safe
# (optional) list included test IDs here, eg '[B101, B406]':
tests:
# (optional) list skipped test IDs here, eg '[B101, B406]':
skips:
### (optional) plugin settings - some test plugins require configuration data
### that may be given here, per-plugin. All bandit test plugins have a built in
### set of sensible defaults and these will be used if no configuration is
### provided. It is not necessary to provide settings for every (or any) plugin
### if the defaults are acceptable.
any_other_function_with_shell_equals_true:
no_shell:
- os.execl
- os.execle
- os.execlp
- os.execlpe
- os.execv
- os.execve
- os.execvp
- os.execvpe
- os.spawnl
- os.spawnle
- os.spawnlp
- os.spawnlpe
- os.spawnv
- os.spawnve
- os.spawnvp
- os.spawnvpe
- os.startfile
shell:
- os.system
- os.popen
- os.popen2
- os.popen3
- os.popen4
- popen2.popen2
- popen2.popen3
- popen2.popen4
- popen2.Popen3
- popen2.Popen4
- commands.getoutput
- commands.getstatusoutput
subprocess:
- subprocess.Popen
- subprocess.call
- subprocess.check_call
- subprocess.check_output
- subprocess.run
hardcoded_tmp_directory:
tmp_dirs:
- /tmp
- /var/tmp
- /dev/shm
linux_commands_wildcard_injection:
no_shell:
- os.execl
- os.execle
- os.execlp
- os.execlpe
- os.execv
- os.execve
- os.execvp
- os.execvpe
- os.spawnl
- os.spawnle
- os.spawnlp
- os.spawnlpe
- os.spawnv
- os.spawnve
- os.spawnvp
- os.spawnvpe
- os.startfile
shell:
- os.system
- os.popen
- os.popen2
- os.popen3
- os.popen4
- popen2.popen2
- popen2.popen3
- popen2.popen4
- popen2.Popen3
- popen2.Popen4
- commands.getoutput
- commands.getstatusoutput
subprocess:
- subprocess.Popen
- subprocess.call
- subprocess.check_call
- subprocess.check_output
- subprocess.run
ssl_with_bad_defaults:
bad_protocol_versions:
- PROTOCOL_SSLv2
- SSLv2_METHOD
- SSLv23_METHOD
- PROTOCOL_SSLv3
- PROTOCOL_TLSv1
- SSLv3_METHOD
- TLSv1_METHOD
ssl_with_bad_version:
bad_protocol_versions:
- PROTOCOL_SSLv2
- SSLv2_METHOD
- SSLv23_METHOD
- PROTOCOL_SSLv3
- PROTOCOL_TLSv1
- SSLv3_METHOD
- TLSv1_METHOD
start_process_with_a_shell:
no_shell:
- os.execl
- os.execle
- os.execlp
- os.execlpe
- os.execv
- os.execve
- os.execvp
- os.execvpe
- os.spawnl
- os.spawnle
- os.spawnlp
- os.spawnlpe
- os.spawnv
- os.spawnve
- os.spawnvp
- os.spawnvpe
- os.startfile
shell:
- os.system
- os.popen
- os.popen2
- os.popen3
- os.popen4
- popen2.popen2
- popen2.popen3
- popen2.popen4
- popen2.Popen3
- popen2.Popen4
- commands.getoutput
- commands.getstatusoutput
subprocess:
- subprocess.Popen
- subprocess.call
- subprocess.check_call
- subprocess.check_output
- subprocess.run
start_process_with_no_shell:
no_shell:
- os.execl
- os.execle
- os.execlp
- os.execlpe
- os.execv
- os.execve
- os.execvp
- os.execvpe
- os.spawnl
- os.spawnle
- os.spawnlp
- os.spawnlpe
- os.spawnv
- os.spawnve
- os.spawnvp
- os.spawnvpe
- os.startfile
shell:
- os.system
- os.popen
- os.popen2
- os.popen3
- os.popen4
- popen2.popen2
- popen2.popen3
- popen2.popen4
- popen2.Popen3
- popen2.Popen4
- commands.getoutput
- commands.getstatusoutput
subprocess:
- subprocess.Popen
- subprocess.call
- subprocess.check_call
- subprocess.check_output
- subprocess.run
start_process_with_partial_path:
no_shell:
- os.execl
- os.execle
- os.execlp
- os.execlpe
- os.execv
- os.execve
- os.execvp
- os.execvpe
- os.spawnl
- os.spawnle
- os.spawnlp
- os.spawnlpe
- os.spawnv
- os.spawnve
- os.spawnvp
- os.spawnvpe
- os.startfile
shell:
- os.system
- os.popen
- os.popen2
- os.popen3
- os.popen4
- popen2.popen2
- popen2.popen3
- popen2.popen4
- popen2.Popen3
- popen2.Popen4
- commands.getoutput
- commands.getstatusoutput
subprocess:
- subprocess.Popen
- subprocess.call
- subprocess.check_call
- subprocess.check_output
- subprocess.run
subprocess_popen_with_shell_equals_true:
no_shell:
- os.execl
- os.execle
- os.execlp
- os.execlpe
- os.execv
- os.execve
- os.execvp
- os.execvpe
- os.spawnl
- os.spawnle
- os.spawnlp
- os.spawnlpe
- os.spawnv
- os.spawnve
- os.spawnvp
- os.spawnvpe
- os.startfile
shell:
- os.system
- os.popen
- os.popen2
- os.popen3
- os.popen4
- popen2.popen2
- popen2.popen3
- popen2.popen4
- popen2.Popen3
- popen2.Popen4
- commands.getoutput
- commands.getstatusoutput
subprocess:
- subprocess.Popen
- subprocess.call
- subprocess.check_call
- subprocess.check_output
- subprocess.run
subprocess_without_shell_equals_true:
no_shell:
- os.execl
- os.execle
- os.execlp
- os.execlpe
- os.execv
- os.execve
- os.execvp
- os.execvpe
- os.spawnl
- os.spawnle
- os.spawnlp
- os.spawnlpe
- os.spawnv
- os.spawnve
- os.spawnvp
- os.spawnvpe
- os.startfile
shell:
- os.system
- os.popen
- os.popen2
- os.popen3
- os.popen4
- popen2.popen2
- popen2.popen3
- popen2.popen4
- popen2.Popen3
- popen2.Popen4
- commands.getoutput
- commands.getstatusoutput
subprocess:
- subprocess.Popen
- subprocess.call
- subprocess.check_call
- subprocess.check_output
- subprocess.run
try_except_continue:
check_typed_exception: false
try_except_pass:
check_typed_exception: false
weak_cryptographic_key:
weak_key_size_dsa_high: 1024
weak_key_size_dsa_medium: 2048
weak_key_size_ec_high: 160
weak_key_size_ec_medium: 224
weak_key_size_rsa_high: 1024
weak_key_size_rsa_medium: 2048