| # |
| # Copyright 2018 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| from twisted.internet import reactor |
| from twisted.internet.defer import inlineCallbacks, returnValue, TimeoutError, failure |
| from pyvoltha.adapters.extensions.omci.omci_me import PptpEthernetUniFrame, GalEthernetProfileFrame, \ |
| MacBridgePortConfigurationDataFrame, MacBridgeServiceProfileFrame, Ieee8021pMapperServiceProfileFrame, \ |
| VeipUniFrame, ExtendedVlanTaggingOperationConfigurationDataFrame,Ont2GFrame |
| from pyvoltha.adapters.extensions.omci.tasks.task import Task |
| from pyvoltha.adapters.extensions.omci.omci_defs import EntityOperations, ReasonCodes |
| from uni_port import UniType |
| from pon_port \ |
| import TASK_PRIORITY, DEFAULT_TPID, DEFAULT_GEM_PAYLOAD |
| |
| OP = EntityOperations |
| RC = ReasonCodes |
| |
| |
| class MibDownloadFailure(Exception): |
| """ |
| This error is raised by default when the download fails |
| """ |
| |
| |
| class MibResourcesFailure(Exception): |
| """ |
| This error is raised by when one or more resources required is not available |
| """ |
| |
| |
| class BrcmMibDownloadTask(Task): |
| """ |
| OpenOMCI MIB Download Bridge Setup Task |
| |
| This task takes the legacy OMCI 'script' for provisioning the Broadcom ONU |
| and converts it to run as a Task on the OpenOMCI Task runner. This is |
| in order to begin to decompose service instantiation in preparation for |
| Technology Profile work. |
| |
| Once technology profiles are ready, some of this task may hang around or |
| be moved into OpenOMCI if there are any very common settings/configs to do |
| for any profile that may be provided in the v2.0 release |
| |
| """ |
| |
| name = "Broadcom MIB Download Bridge Setup Task" |
| |
| def __init__(self, omci_agent, handler): |
| """ |
| Class initialization |
| |
| :param omci_agent: (OmciAdapterAgent) OMCI Adapter agent |
| :param device_id: (str) ONU Device ID |
| """ |
| super(BrcmMibDownloadTask, self).__init__(BrcmMibDownloadTask.name, |
| omci_agent, |
| handler.device_id, |
| priority=TASK_PRIORITY) |
| self._handler = handler |
| self._onu_device = omci_agent.get_device(handler.device_id) |
| self._local_deferred = None |
| |
| # Frame size |
| self._max_gem_payload = DEFAULT_GEM_PAYLOAD |
| |
| self._pon = handler.pon_port |
| |
| # Defaults |
| self._input_tpid = DEFAULT_TPID |
| self._output_tpid = DEFAULT_TPID |
| |
| # Entity IDs. IDs with values can probably be most anything for most ONUs, |
| # IDs set to None are discovered/set |
| |
| self._mac_bridge_service_profile_entity_id = \ |
| self._handler.mac_bridge_service_profile_entity_id |
| self._ieee_mapper_service_profile_entity_id = \ |
| self._pon.ieee_mapper_service_profile_entity_id |
| self._mac_bridge_port_ani_entity_id = \ |
| self._pon.mac_bridge_port_ani_entity_id |
| self._gal_enet_profile_entity_id = \ |
| self._handler.gal_enet_profile_entity_id |
| |
| self._free_ul_prior_q_entity_ids = set() |
| self._free_dl_prior_q_entity_ids = set() |
| |
| def cancel_deferred(self): |
| super(BrcmMibDownloadTask, self).cancel_deferred() |
| |
| d, self._local_deferred = self._local_deferred, None |
| try: |
| if d is not None and not d.called: |
| d.cancel() |
| except: |
| pass |
| |
| def start(self): |
| """ |
| Start the MIB Download |
| """ |
| super(BrcmMibDownloadTask, self).start() |
| self._local_deferred = reactor.callLater(0, self.perform_mib_download) |
| |
| def stop(self): |
| """ |
| Shutdown MIB Synchronization tasks |
| """ |
| self.cancel_deferred() |
| super(BrcmMibDownloadTask, self).stop() |
| |
| def check_status_and_state(self, results, operation=''): |
| """ |
| Check the results of an OMCI response. An exception is thrown |
| if the task was cancelled or an error was detected. |
| |
| :param results: (OmciFrame) OMCI Response frame |
| :param operation: (str) what operation was being performed |
| :return: True if successful, False if the entity existed (already created) |
| """ |
| |
| omci_msg = results.fields['omci_message'].fields |
| status = omci_msg['success_code'] |
| error_mask = omci_msg.get('parameter_error_attributes_mask', 'n/a') |
| failed_mask = omci_msg.get('failed_attributes_mask', 'n/a') |
| unsupported_mask = omci_msg.get('unsupported_attributes_mask', 'n/a') |
| |
| self.log.debug("OMCI Result", operation=operation, |
| omci_msg=omci_msg, status=status, |
| error_mask=error_mask, failed_mask=failed_mask, |
| unsupported_mask=unsupported_mask) |
| |
| self.strobe_watchdog() |
| if status == RC.Success: |
| return True |
| |
| elif status == RC.InstanceExists: |
| return False |
| |
| raise MibDownloadFailure('{} failed with a status of {}, error_mask: {}, failed_mask: {}, unsupported_mask: {}' |
| .format(operation, status, error_mask, failed_mask, unsupported_mask)) |
| |
| @inlineCallbacks |
| def perform_mib_download(self): |
| """ |
| Send the commands to minimally configure the PON, Bridge, and |
| UNI ports for this device. The application of any service flows |
| and other characteristics are done as needed. |
| """ |
| try: |
| self.log.info('perform-download') |
| |
| # Provision the initial bridge configuration |
| yield self.perform_initial_bridge_setup() |
| |
| for uni_port in self._handler.uni_ports: |
| # Provision the initial bridge configuration |
| yield self.perform_uni_initial_bridge_setup(uni_port) |
| |
| self.deferred.callback('initial-download-success') |
| except Exception as e: |
| self.log.error('initial-download-failure', e=e) |
| self.deferred.errback(failure.Failure(e)) |
| |
| @inlineCallbacks |
| def perform_initial_bridge_setup(self): |
| |
| omci_cc = self._onu_device.omci_cc |
| try: |
| ######################################################################################## |
| # Create GalEthernetProfile - Once per ONU/PON interface |
| # |
| # EntityID will be referenced by: |
| # - GemInterworkingTp |
| # References: |
| # - Nothing |
| |
| msg = GalEthernetProfileFrame( |
| self._gal_enet_profile_entity_id, |
| max_gem_payload_size=self._max_gem_payload |
| ) |
| frame = msg.create() |
| self.log.debug('openomci-msg', omci_msg=msg) |
| results = yield omci_cc.send(frame) |
| self.check_status_and_state(results, 'create-gal-ethernet-profile') |
| |
| ont2_attributes = dict(current_connectivity_mode=5) |
| msg = Ont2GFrame(attributes=ont2_attributes) |
| frame = msg.set() |
| self.log.debug('openomci-msg', omci_msg=msg) |
| results = yield omci_cc.send(frame) |
| self.check_status_and_state(results, 'set-ont2g') |
| |
| except TimeoutError as e: |
| self.log.warn('rx-timeout-initial-gal-profile', e=e) |
| raise |
| |
| except Exception as e: |
| self.log.exception('omci-setup-initial-gal-profile', e=e) |
| raise |
| |
| returnValue(None) |
| |
| @inlineCallbacks |
| def perform_uni_initial_bridge_setup(self, uni_port): |
| omci_cc = self._onu_device.omci_cc |
| frame = None |
| try: |
| ################################################################################ |
| # Common - PON and/or UNI # |
| ################################################################################ |
| # MAC Bridge Service Profile |
| # |
| # EntityID will be referenced by: |
| # - MAC Bridge Port Configuration Data (PON & UNI) |
| # References: |
| # - Nothing |
| |
| # TODO: magic. event if static, assign to a meaningful variable name |
| attributes = { |
| 'spanning_tree_ind': False, |
| 'learning_ind': False, |
| 'priority': 0x8000, |
| 'max_age': 20 * 256, |
| 'hello_time': 2 * 256, |
| 'forward_delay': 15 * 256, |
| 'unknown_mac_address_discard': False |
| } |
| msg = MacBridgeServiceProfileFrame( |
| self._mac_bridge_service_profile_entity_id + uni_port.mac_bridge_port_num, |
| attributes |
| ) |
| frame = msg.create() |
| self.log.debug('openomci-msg', omci_msg=msg) |
| results = yield omci_cc.send(frame) |
| self.check_status_and_state(results, 'create-mac-bridge-service-profile') |
| |
| ################################################################################ |
| # UNI Specific # |
| ################################################################################ |
| # MAC Bridge Port config |
| # This configuration is for Ethernet UNI |
| # |
| # EntityID will be referenced by: |
| # - Nothing |
| # References: |
| # - MAC Bridge Service Profile (the bridge) |
| # - PPTP Ethernet or VEIP UNI |
| |
| # default to PPTP |
| tp_type = 1 |
| association_type = 2 |
| if uni_port.type.value == UniType.VEIP.value: |
| tp_type = 11 |
| association_type = 10 |
| |
| msg = MacBridgePortConfigurationDataFrame( |
| self._mac_bridge_port_ani_entity_id + uni_port.entity_id, # Entity ID |
| bridge_id_pointer=self._mac_bridge_service_profile_entity_id + uni_port.mac_bridge_port_num, # Bridge Entity ID |
| port_num=uni_port.mac_bridge_port_num, # Port ID |
| tp_type=tp_type, # PPTP Ethernet or VEIP UNI |
| tp_pointer=uni_port.entity_id # Ethernet UNI ID |
| ) |
| frame = msg.create() |
| self.log.debug('openomci-msg', omci_msg=msg) |
| results = yield omci_cc.send(frame) |
| self.check_status_and_state(results, 'create-mac-bridge-port-configuration-data-uni-port') |
| |
| |
| ################################################################################ |
| # Create Extended VLAN Tagging Operation config (UNI-side) |
| # |
| # EntityID relates to the VLAN TCIS later used int vlan filter task. This only |
| # sets up the inital MIB entry as it relates to port config, it does not set vlan |
| # that is saved for the vlan filter task |
| # |
| # References: |
| # - PPTP Ethernet or VEIP UNI |
| # |
| |
| attributes = dict( |
| association_type=association_type, # Assoc Type, PPTP/VEIP Ethernet UNI |
| associated_me_pointer=uni_port.entity_id, # Assoc ME, PPTP/VEIP Entity Id |
| |
| # See VOL-1311 - Need to set table during create to avoid exception |
| # trying to read back table during post-create-read-missing-attributes |
| # But, because this is a R/W attribute. Some ONU may not accept the |
| # value during create. It is repeated again in a set below. |
| input_tpid=self._input_tpid, # input TPID |
| output_tpid=self._output_tpid, # output TPID |
| ) |
| |
| msg = ExtendedVlanTaggingOperationConfigurationDataFrame( |
| self._mac_bridge_service_profile_entity_id + uni_port.mac_bridge_port_num, # Bridge Entity ID |
| attributes=attributes |
| ) |
| |
| frame = msg.create() |
| self.log.debug('openomci-msg', omci_msg=msg) |
| results = yield omci_cc.send(frame) |
| self.check_status_and_state(results, 'create-extended-vlan-tagging-operation-configuration-data') |
| |
| attributes = dict( |
| # Specifies the TPIDs in use and that operations in the downstream direction are |
| # inverse to the operations in the upstream direction |
| input_tpid=self._input_tpid, # input TPID |
| output_tpid=self._output_tpid, # output TPID |
| downstream_mode=0, # inverse of upstream |
| ) |
| |
| msg = ExtendedVlanTaggingOperationConfigurationDataFrame( |
| self._mac_bridge_service_profile_entity_id + uni_port.mac_bridge_port_num, # Bridge Entity ID |
| attributes=attributes |
| ) |
| |
| frame = msg.set() |
| self.log.debug('openomci-msg', omci_msg=msg) |
| self.strobe_watchdog() |
| results = yield self._device.omci_cc.send(frame) |
| self.check_status_and_state(results, 'set-extended-vlan-tagging-operation-configuration-data') |
| |
| except TimeoutError as e: |
| self.log.warn('rx-timeout-inital-per-uni-setup', e=e) |
| raise |
| |
| except Exception as e: |
| self.log.exception('omci-setup-initial-per-uni-setup', e=e) |
| raise |
| |
| returnValue(None) |