[VOL-1460]

- Imported protobuf definitions from pyvoltha at
  https://gerrit.opencord.org/gitweb?p=pyvoltha.git, commit hash:
  944aee71301b8ddb211b6e51d685f56d5c4a911b

- Imported upstream Google API protos from
  https://github.com/googleapis/googleapis, commit hash:
  5a90fbea68ce4a6e87c20d2df10df5ecd88299ff

- Fixed `import` paths and directory heirarchy in protobuf definitions
  to be compatible with both python 2 and 3.

- Created Makefile scaffold to generate language-specific bindings for
  python and go

Change-Id: Idd6b6b985a5eae4c38d40dd07ae78744c09e37f5
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..f24c7c4
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,17 @@
+# python related
+*.pyc
+*.egg-info
+dist
+build
+.tox
+venv_protos
+
+# generated files that shouldn't be committed
+*_pb2.py
+*_pb2_grpc.py
+*.desc
+
+# tesing related
+.coverage
+*coverage.xml
+*results.xml
diff --git a/.gitreview b/.gitreview
new file mode 100644
index 0000000..07b3894
--- /dev/null
+++ b/.gitreview
@@ -0,0 +1,5 @@
+[gerrit]
+host=gerrit.opencord.org
+port=29418
+project=voltha-protos.git
+defaultremote=origin
diff --git a/MANIFEST.in b/MANIFEST.in
new file mode 100644
index 0000000..6a95017
--- /dev/null
+++ b/MANIFEST.in
@@ -0,0 +1,2 @@
+include VERSION
+
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..681b61f
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,79 @@
+# Copyright 2019-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Makefile for voltha-protos
+default: test
+
+# Variables
+PROTO_FILES := $(wildcard protos/voltha_protos/*.proto)
+PROTO_PYTHON_DEST_DIR := python/voltha_protos
+PROTO_PYTHON_PB2 := $(foreach f, $(PROTO_FILES), $(patsubst protos/voltha_protos/%.proto,$(PROTO_PYTHON_DEST_DIR)/%_pb2.py,$(f)))
+
+print:
+	echo "Proto files: $(PROTO_FILES)"
+	echo "Python PB2 files: $(PROTO_PYTHON_PB2)"
+
+# set default shell
+SHELL = bash -e -o pipefail
+
+# Generic targets
+protos: python-protos go-protos
+
+build: python-build go-build
+
+test: python-test go-test
+
+clean: python-clean go-clean
+
+# Python targets
+python-protos: $(PROTO_PYTHON_PB2)
+
+venv_protos:
+	virtualenv $@;\
+	source ./$@/bin/activate ; set -u ;\
+	pip install grpcio-tools googleapis-common-protos
+
+$(PROTO_PYTHON_DEST_DIR)/%_pb2.py: protos/voltha_protos/%.proto Makefile venv_protos
+	source ./venv_protos/bin/activate ; set -u ;\
+	python -m grpc_tools.protoc \
+		-I protos \
+		--python_out=python \
+		--grpc_python_out=python \
+		--descriptor_set_out=$(PROTO_PYTHON_DEST_DIR)/$(basename $(notdir $<)).desc \
+		--include_imports \
+		--include_source_info \
+		$<
+
+python-build: setup.py
+	python ./setup.py sdist
+
+python-test: tox.ini setup.py python-protos
+	tox
+
+python-clean:
+	rm -rf venv_protos .coverage coverage.xml nose2-results.xml dist $(PROTO_PYTHON_PB2) $(PROTO_PYTHON_DEST_DIR)*.desc
+
+# Go targets
+go-protos:
+	echo "FIXME: Add golang protos"
+
+go-build:
+	echo "FIXME: Add golang build"
+
+go-test:
+	echo "FIXME: Add golang tests"
+
+go-clean:
+	echo "FIXME: Add golang cleanup"
+
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..1b92287
--- /dev/null
+++ b/README.md
@@ -0,0 +1,35 @@
+# voltha-protos
+
+Protobuf files used by [VOLTHA](https://wiki.opencord.org/display/CORD/VOLTHA).
+
+Currently this is used to generate both go and python.
+
+Protobuf definition files are located in `protos/voltha_protos` directory. This
+directory heirarchy and import scheme is required to allow the python code
+generated by the GRPC compiler to [have the correct import
+paths](https://github.com/grpc/grpc/issues/9575#issuecomment-293934506).
+
+> NOTE: The `protos/google/api` directory has files copied from the [Google
+> APIs](https://github.com/googleapis/googleapis), and is only included for
+> initial compilation of the VOLTHA protobuf files - these API's should be
+> installed independently via either the python
+> [googleapis-common-protos](https://pypi.org/project/googleapis-common-protos/)
+> package or the golang [go-genproto](https://github.com/google/go-genproto)
+> repo.
+
+## Using voltha-protos in your project
+
+### Python
+
+Installation: `pip install voltha-protos`
+
+Use: `from voltha_protos import voltha_pb2`
+
+### go
+
+`go get ...`
+
+## Testing
+
+`make test` will run tests for all languages.
+
diff --git a/VERSION b/VERSION
new file mode 100644
index 0000000..a22e595
--- /dev/null
+++ b/VERSION
@@ -0,0 +1 @@
+0.1.0dev0
diff --git a/protos/google/api/annotations.proto b/protos/google/api/annotations.proto
new file mode 100644
index 0000000..85c361b
--- /dev/null
+++ b/protos/google/api/annotations.proto
@@ -0,0 +1,31 @@
+// Copyright (c) 2015, Google Inc.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+syntax = "proto3";
+
+package google.api;
+
+import "google/api/http.proto";
+import "google/protobuf/descriptor.proto";
+
+option go_package = "google.golang.org/genproto/googleapis/api/annotations;annotations";
+option java_multiple_files = true;
+option java_outer_classname = "AnnotationsProto";
+option java_package = "com.google.api";
+option objc_class_prefix = "GAPI";
+
+extend google.protobuf.MethodOptions {
+  // See `HttpRule`.
+  HttpRule http = 72295728;
+}
diff --git a/protos/google/api/http.proto b/protos/google/api/http.proto
new file mode 100644
index 0000000..673adc0
--- /dev/null
+++ b/protos/google/api/http.proto
@@ -0,0 +1,380 @@
+// Copyright 2018 Google LLC.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+syntax = "proto3";
+
+package google.api;
+
+option cc_enable_arenas = true;
+option go_package = "google.golang.org/genproto/googleapis/api/annotations;annotations";
+option java_multiple_files = true;
+option java_outer_classname = "HttpProto";
+option java_package = "com.google.api";
+option objc_class_prefix = "GAPI";
+
+// Defines the HTTP configuration for an API service. It contains a list of
+// [HttpRule][google.api.HttpRule], each specifying the mapping of an RPC method
+// to one or more HTTP REST API methods.
+message Http {
+  // A list of HTTP configuration rules that apply to individual API methods.
+  //
+  // **NOTE:** All service configuration rules follow "last one wins" order.
+  repeated HttpRule rules = 1;
+
+  // When set to true, URL path parmeters will be fully URI-decoded except in
+  // cases of single segment matches in reserved expansion, where "%2F" will be
+  // left encoded.
+  //
+  // The default behavior is to not decode RFC 6570 reserved characters in multi
+  // segment matches.
+  bool fully_decode_reserved_expansion = 2;
+}
+
+// # gRPC Transcoding
+//
+// gRPC Transcoding is a feature for mapping between a gRPC method and one or
+// more HTTP REST endpoints. It allows developers to build a single API service
+// that supports both gRPC APIs and REST APIs. Many systems, including [Google
+// APIs](https://github.com/googleapis/googleapis),
+// [Cloud Endpoints](https://cloud.google.com/endpoints), [gRPC
+// Gateway](https://github.com/grpc-ecosystem/grpc-gateway),
+// and [Envoy](https://github.com/envoyproxy/envoy) proxy support this feature
+// and use it for large scale production services.
+//
+// `HttpRule` defines the schema of the gRPC/REST mapping. The mapping specifies
+// how different portions of the gRPC request message are mapped to the URL
+// path, URL query parameters, and HTTP request body. It also controls how the
+// gRPC response message is mapped to the HTTP response body. `HttpRule` is
+// typically specified as an `google.api.http` annotation on the gRPC method.
+//
+// Each mapping specifies a URL path template and an HTTP method. The path
+// template may refer to one or more fields in the gRPC request message, as long
+// as each field is a non-repeated field with a primitive (non-message) type.
+// The path template controls how fields of the request message are mapped to
+// the URL path.
+//
+// Example:
+//
+//     service Messaging {
+//       rpc GetMessage(GetMessageRequest) returns (Message) {
+//         option (google.api.http) = {
+//             get: "/v1/{name=messages/*}"
+//         };
+//       }
+//     }
+//     message GetMessageRequest {
+//       string name = 1; // Mapped to URL path.
+//     }
+//     message Message {
+//       string text = 1; // The resource content.
+//     }
+//
+// This enables an HTTP REST to gRPC mapping as below:
+//
+// HTTP | gRPC
+// -----|-----
+// `GET /v1/messages/123456`  | `GetMessage(name: "messages/123456")`
+//
+// Any fields in the request message which are not bound by the path template
+// automatically become HTTP query parameters if there is no HTTP request body.
+// For example:
+//
+//     service Messaging {
+//       rpc GetMessage(GetMessageRequest) returns (Message) {
+//         option (google.api.http) = {
+//             get:"/v1/messages/{message_id}"
+//         };
+//       }
+//     }
+//     message GetMessageRequest {
+//       message SubMessage {
+//         string subfield = 1;
+//       }
+//       string message_id = 1; // Mapped to URL path.
+//       int64 revision = 2;    // Mapped to URL query parameter `revision`.
+//       SubMessage sub = 3;    // Mapped to URL query parameter `sub.subfield`.
+//     }
+//
+// This enables a HTTP JSON to RPC mapping as below:
+//
+// HTTP | gRPC
+// -----|-----
+// `GET /v1/messages/123456?revision=2&sub.subfield=foo` |
+// `GetMessage(message_id: "123456" revision: 2 sub: SubMessage(subfield:
+// "foo"))`
+//
+// Note that fields which are mapped to URL query parameters must have a
+// primitive type or a repeated primitive type or a non-repeated message type.
+// In the case of a repeated type, the parameter can be repeated in the URL
+// as `...?param=A&param=B`. In the case of a message type, each field of the
+// message is mapped to a separate parameter, such as
+// `...?foo.a=A&foo.b=B&foo.c=C`.
+//
+// For HTTP methods that allow a request body, the `body` field
+// specifies the mapping. Consider a REST update method on the
+// message resource collection:
+//
+//     service Messaging {
+//       rpc UpdateMessage(UpdateMessageRequest) returns (Message) {
+//         option (google.api.http) = {
+//           patch: "/v1/messages/{message_id}"
+//           body: "message"
+//         };
+//       }
+//     }
+//     message UpdateMessageRequest {
+//       string message_id = 1; // mapped to the URL
+//       Message message = 2;   // mapped to the body
+//     }
+//
+// The following HTTP JSON to RPC mapping is enabled, where the
+// representation of the JSON in the request body is determined by
+// protos JSON encoding:
+//
+// HTTP | gRPC
+// -----|-----
+// `PATCH /v1/messages/123456 { "text": "Hi!" }` | `UpdateMessage(message_id:
+// "123456" message { text: "Hi!" })`
+//
+// The special name `*` can be used in the body mapping to define that
+// every field not bound by the path template should be mapped to the
+// request body.  This enables the following alternative definition of
+// the update method:
+//
+//     service Messaging {
+//       rpc UpdateMessage(Message) returns (Message) {
+//         option (google.api.http) = {
+//           patch: "/v1/messages/{message_id}"
+//           body: "*"
+//         };
+//       }
+//     }
+//     message Message {
+//       string message_id = 1;
+//       string text = 2;
+//     }
+//
+//
+// The following HTTP JSON to RPC mapping is enabled:
+//
+// HTTP | gRPC
+// -----|-----
+// `PATCH /v1/messages/123456 { "text": "Hi!" }` | `UpdateMessage(message_id:
+// "123456" text: "Hi!")`
+//
+// Note that when using `*` in the body mapping, it is not possible to
+// have HTTP parameters, as all fields not bound by the path end in
+// the body. This makes this option more rarely used in practice when
+// defining REST APIs. The common usage of `*` is in custom methods
+// which don't use the URL at all for transferring data.
+//
+// It is possible to define multiple HTTP methods for one RPC by using
+// the `additional_bindings` option. Example:
+//
+//     service Messaging {
+//       rpc GetMessage(GetMessageRequest) returns (Message) {
+//         option (google.api.http) = {
+//           get: "/v1/messages/{message_id}"
+//           additional_bindings {
+//             get: "/v1/users/{user_id}/messages/{message_id}"
+//           }
+//         };
+//       }
+//     }
+//     message GetMessageRequest {
+//       string message_id = 1;
+//       string user_id = 2;
+//     }
+//
+// This enables the following two alternative HTTP JSON to RPC mappings:
+//
+// HTTP | gRPC
+// -----|-----
+// `GET /v1/messages/123456` | `GetMessage(message_id: "123456")`
+// `GET /v1/users/me/messages/123456` | `GetMessage(user_id: "me" message_id:
+// "123456")`
+//
+// ## Rules for HTTP mapping
+//
+// 1. Leaf request fields (recursive expansion nested messages in the request
+//    message) are classified into three categories:
+//    - Fields referred by the path template. They are passed via the URL path.
+//    - Fields referred by the [HttpRule.body][google.api.HttpRule.body]. They
+//    are passed via the HTTP
+//      request body.
+//    - All other fields are passed via the URL query parameters, and the
+//      parameter name is the field path in the request message. A repeated
+//      field can be represented as multiple query parameters under the same
+//      name.
+//  2. If [HttpRule.body][google.api.HttpRule.body] is "*", there is no URL
+//  query parameter, all fields
+//     are passed via URL path and HTTP request body.
+//  3. If [HttpRule.body][google.api.HttpRule.body] is omitted, there is no HTTP
+//  request body, all
+//     fields are passed via URL path and URL query parameters.
+//
+// ### Path template syntax
+//
+//     Template = "/" Segments [ Verb ] ;
+//     Segments = Segment { "/" Segment } ;
+//     Segment  = "*" | "**" | LITERAL | Variable ;
+//     Variable = "{" FieldPath [ "=" Segments ] "}" ;
+//     FieldPath = IDENT { "." IDENT } ;
+//     Verb     = ":" LITERAL ;
+//
+// The syntax `*` matches a single URL path segment. The syntax `**` matches
+// zero or more URL path segments, which must be the last part of the URL path
+// except the `Verb`.
+//
+// The syntax `Variable` matches part of the URL path as specified by its
+// template. A variable template must not contain other variables. If a variable
+// matches a single path segment, its template may be omitted, e.g. `{var}`
+// is equivalent to `{var=*}`.
+//
+// The syntax `LITERAL` matches literal text in the URL path. If the `LITERAL`
+// contains any reserved character, such characters should be percent-encoded
+// before the matching.
+//
+// If a variable contains exactly one path segment, such as `"{var}"` or
+// `"{var=*}"`, when such a variable is expanded into a URL path on the client
+// side, all characters except `[-_.~0-9a-zA-Z]` are percent-encoded. The
+// server side does the reverse decoding. Such variables show up in the
+// [Discovery
+// Document](https://developers.google.com/discovery/v1/reference/apis) as
+// `{var}`.
+//
+// If a variable contains multiple path segments, such as `"{var=foo/*}"`
+// or `"{var=**}"`, when such a variable is expanded into a URL path on the
+// client side, all characters except `[-_.~/0-9a-zA-Z]` are percent-encoded.
+// The server side does the reverse decoding, except "%2F" and "%2f" are left
+// unchanged. Such variables show up in the
+// [Discovery
+// Document](https://developers.google.com/discovery/v1/reference/apis) as
+// `{+var}`.
+//
+// ## Using gRPC API Service Configuration
+//
+// gRPC API Service Configuration (service config) is a configuration language
+// for configuring a gRPC service to become a user-facing product. The
+// service config is simply the YAML representation of the `google.api.Service`
+// proto message.
+//
+// As an alternative to annotating your proto file, you can configure gRPC
+// transcoding in your service config YAML files. You do this by specifying a
+// `HttpRule` that maps the gRPC method to a REST endpoint, achieving the same
+// effect as the proto annotation. This can be particularly useful if you
+// have a proto that is reused in multiple services. Note that any transcoding
+// specified in the service config will override any matching transcoding
+// configuration in the proto.
+//
+// Example:
+//
+//     http:
+//       rules:
+//         # Selects a gRPC method and applies HttpRule to it.
+//         - selector: example.v1.Messaging.GetMessage
+//           get: /v1/messages/{message_id}/{sub.subfield}
+//
+// ## Special notes
+//
+// When gRPC Transcoding is used to map a gRPC to JSON REST endpoints, the
+// proto to JSON conversion must follow the [proto3
+// specification](https://developers.google.com/protocol-buffers/docs/proto3#json).
+//
+// While the single segment variable follows the semantics of
+// [RFC 6570](https://tools.ietf.org/html/rfc6570) Section 3.2.2 Simple String
+// Expansion, the multi segment variable **does not** follow RFC 6570 Section
+// 3.2.3 Reserved Expansion. The reason is that the Reserved Expansion
+// does not expand special characters like `?` and `#`, which would lead
+// to invalid URLs. As the result, gRPC Transcoding uses a custom encoding
+// for multi segment variables.
+//
+// The path variables **must not** refer to any repeated or mapped field,
+// because client libraries are not capable of handling such variable expansion.
+//
+// The path variables **must not** capture the leading "/" character. The reason
+// is that the most common use case "{var}" does not capture the leading "/"
+// character. For consistency, all path variables must share the same behavior.
+//
+// Repeated message fields must not be mapped to URL query parameters, because
+// no client library can support such complicated mapping.
+//
+// If an API needs to use a JSON array for request or response body, it can map
+// the request or response body to a repeated field. However, some gRPC
+// Transcoding implementations may not support this feature.
+message HttpRule {
+  // Selects a method to which this rule applies.
+  //
+  // Refer to [selector][google.api.DocumentationRule.selector] for syntax
+  // details.
+  string selector = 1;
+
+  // Determines the URL pattern is matched by this rules. This pattern can be
+  // used with any of the {get|put|post|delete|patch} methods. A custom method
+  // can be defined using the 'custom' field.
+  oneof pattern {
+    // Maps to HTTP GET. Used for listing and getting information about
+    // resources.
+    string get = 2;
+
+    // Maps to HTTP PUT. Used for replacing a resource.
+    string put = 3;
+
+    // Maps to HTTP POST. Used for creating a resource or performing an action.
+    string post = 4;
+
+    // Maps to HTTP DELETE. Used for deleting a resource.
+    string delete = 5;
+
+    // Maps to HTTP PATCH. Used for updating a resource.
+    string patch = 6;
+
+    // The custom pattern is used for specifying an HTTP method that is not
+    // included in the `pattern` field, such as HEAD, or "*" to leave the
+    // HTTP method unspecified for this rule. The wild-card rule is useful
+    // for services that provide content to Web (HTML) clients.
+    CustomHttpPattern custom = 8;
+  }
+
+  // The name of the request field whose value is mapped to the HTTP request
+  // body, or `*` for mapping all request fields not captured by the path
+  // pattern to the HTTP body, or omitted for not having any HTTP request body.
+  //
+  // NOTE: the referred field must be present at the top-level of the request
+  // message type.
+  string body = 7;
+
+  // Optional. The name of the response field whose value is mapped to the HTTP
+  // response body. When omitted, the entire response message will be used
+  // as the HTTP response body.
+  //
+  // NOTE: The referred field must be present at the top-level of the response
+  // message type.
+  string response_body = 12;
+
+  // Additional HTTP bindings for the selector. Nested bindings must
+  // not contain an `additional_bindings` field themselves (that is,
+  // the nesting may only be one level deep).
+  repeated HttpRule additional_bindings = 11;
+}
+
+// A custom pattern is used for defining custom HTTP verb.
+message CustomHttpPattern {
+  // The name of this custom HTTP verb.
+  string kind = 1;
+
+  // The path matched by this custom verb.
+  string path = 2;
+}
diff --git a/protos/voltha_protos/adapter.proto b/protos/voltha_protos/adapter.proto
new file mode 100644
index 0000000..9447510
--- /dev/null
+++ b/protos/voltha_protos/adapter.proto
@@ -0,0 +1,43 @@
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/voltha";
+
+package voltha;
+
+import "google/protobuf/any.proto";
+import "voltha_protos/common.proto";
+import "voltha_protos/meta.proto";
+
+
+message AdapterConfig {
+
+    // Common adapter config attributes here
+    LogLevel.LogLevel log_level = 1;
+
+    // Custom (vendor-specific) configuration attributes
+    google.protobuf.Any additional_config = 64;
+
+}
+
+// Adapter (software plugin)
+message Adapter {
+
+    // Unique name of adapter, matching the python packate name under
+    // voltha/adapters.
+    string id = 1 [(access) = READ_ONLY];
+    string vendor = 2 [(access) = READ_ONLY];
+    string version = 3 [(access) = READ_ONLY];
+
+    // Adapter configuration
+    AdapterConfig config = 16;
+
+    // Custom descriptors and custom configuration
+    google.protobuf.Any additional_description = 64 [(access) = READ_ONLY];
+
+    repeated string logical_device_ids = 4;  // Logical devices "owned"
+
+}
+
+message Adapters {
+    repeated Adapter items = 1;
+}
diff --git a/protos/voltha_protos/common.proto b/protos/voltha_protos/common.proto
new file mode 100644
index 0000000..e3b6211
--- /dev/null
+++ b/protos/voltha_protos/common.proto
@@ -0,0 +1,122 @@
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/common";
+
+package voltha;
+
+import "voltha_protos/yang_options.proto";
+
+// Convey a resource identifier
+message ID {
+    string id = 1;
+}
+
+// Represents a list of IDs
+message IDs {
+    repeated ID items = 1;
+}
+
+enum TestModeKeys {
+    api_test=0;
+}
+
+message LogLevel {
+    option (yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    // Logging verbosity level
+    enum LogLevel {
+        DEBUG = 0;
+        INFO = 1;
+        WARNING = 2;
+        ERROR = 3;
+        CRITICAL = 4;
+        FATAL = 5;
+    }
+}
+
+message AdminState {
+    option (yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    // Administrative State
+    enum AdminState {
+
+        // The administrative state of the device is unknown
+        UNKNOWN = 0;
+
+        // The device is pre-provisioned into Voltha, but not contacted by it
+        PREPROVISIONED = 1;
+
+        // The device is enabled for activation and operation
+        ENABLED = 2;
+
+        // The device is disabled and shall not perform its intended forwarding
+        // functions other than being available for re-activation.
+        DISABLED = 3;
+
+        // The device is in the state of image download
+        DOWNLOADING_IMAGE = 4;
+
+        // The device is marked to be deleted
+        DELETED = 5;
+    }
+}
+
+message OperStatus {
+    option (yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    // Operational Status
+    enum OperStatus {
+
+        // The status of the device is unknown at this point
+        UNKNOWN = 0;
+
+        // The device has been discovered, but not yet activated
+        DISCOVERED = 1;
+
+        // The device is being activated (booted, rebooted, upgraded, etc.)
+        ACTIVATING = 2;
+
+        // Service impacting tests are being conducted
+        TESTING = 3;
+
+        // The device is up and active
+        ACTIVE = 4;
+
+        // The device has failed and cannot fulfill its intended role
+        FAILED = 5;
+    }
+}
+
+message ConnectStatus {
+    option (yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    // Connectivity Status
+    enum ConnectStatus {
+
+        // The device connectivity status is unknown
+        UNKNOWN = 0;
+
+        // The device cannot be reached by Voltha
+        UNREACHABLE = 1;
+
+        // There is live communication between device and Voltha
+        REACHABLE = 2;
+    }
+}
+
+message OperationResp {
+    option (yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    enum OperationReturnCode {
+        OPERATION_SUCCESS = 0;
+        OPERATION_FAILURE = 1;
+        OPERATION_UNSUPPORTED = 2;
+    }
+    // Return code
+    OperationReturnCode code = 1;
+
+    // Additional Info
+    string additional_info = 2;
+}
+
+
diff --git a/protos/voltha_protos/device.proto b/protos/voltha_protos/device.proto
new file mode 100644
index 0000000..0dc19cf
--- /dev/null
+++ b/protos/voltha_protos/device.proto
@@ -0,0 +1,328 @@
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/voltha";
+
+package voltha;
+
+import "google/protobuf/any.proto";
+import "voltha_protos/common.proto";
+import "voltha_protos/meta.proto";
+import "voltha_protos/openflow_13.proto";
+import "voltha_protos/yang_options.proto";
+
+// A Device Type
+message DeviceType {
+
+    // Unique name for the device type
+    string id = 1;
+
+    // Unique venor id for the device type applicable to ONU
+    // 4 bytes of vendor id from ONU serial number
+    string vendor_id = 5;
+
+    repeated string vendor_ids = 6;
+
+    // Name of the adapter that handles device type
+    string adapter = 2;
+
+    // Capabilitities
+
+    bool accepts_bulk_flow_update = 3;
+    bool accepts_add_remove_flow_updates = 4;
+    bool accepts_direct_logical_flows_update = 7;
+
+}
+
+// A plurality of device types
+message DeviceTypes {
+    repeated DeviceType items = 1;
+}
+
+message PmConfig {
+    enum PmType {
+        COUNTER = 0;
+        GAUGE = 1;
+        STATE = 2;
+        CONTEXT = 3;
+    }
+    string name = 1;
+    PmType type = 2;
+    bool enabled = 3; // Whether or not this metric makes it to Kafka
+    uint32 sample_freq = 4; // Sample rate in 10ths of a second
+}
+
+message PmGroupConfig {
+    string group_name = 1;
+    uint32 group_freq = 2; // Frequency applicable to the grop
+    bool enabled = 3; // Enable/disable group level only
+    repeated PmConfig metrics = 4;
+}
+
+message PmConfigs {
+    string id = 1; // To work around a chameleon POST bug
+    uint32 default_freq = 2; // Default sample rate
+    // Forces group names and group semantics
+    bool grouped = 3 [(access) = READ_ONLY];
+    // Allows Pm to set an individual sample frequency
+    bool freq_override = 4 [(access) = READ_ONLY];
+    repeated PmGroupConfig groups = 5; // The groups if grouped is true
+    repeated PmConfig metrics = 6; // The metrics themselves if grouped is false.
+}
+
+// Describes instance of software image on the device
+message Image {
+    string name = 1;                // software patch name
+    string version = 2;             // version of software
+    string hash = 3;                // md5 hash
+    string install_datetime = 4;    // combined date and time expressed in UTC.
+                                    // use ISO 8601 format for date and time
+
+    // The active software image is one that is currently loaded and executing
+    // in the ONU or circuit pack. Under normal operation, one software image
+    // is always active while the other is inactive. Under no circumstances are
+    // both software images allowed to be active at the same time
+    bool is_active = 5;             // True if the image is active
+
+    // The committed software image is loaded and executed upon reboot of the
+    // ONU and/or circuit pack. During normal operation, one software image is
+    // always committed, while the other is uncommitted.
+    bool is_committed = 6;          // True if the image is committed
+
+    // A software image is valid if it has been verified to be an executable
+    // code image. The verification mechanism is not subject to standardization;
+    // however, it should include at least a data integrity (e.g., CRC) check of
+    // the entire code image.
+    bool is_valid = 7;              // True if the image is valid
+}
+
+// List of software on the device
+message Images {
+    repeated Image image = 1;
+}
+
+message ImageDownload {
+    option (yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    enum ImageDownloadState {
+        DOWNLOAD_UNKNOWN = 0;
+        DOWNLOAD_SUCCEEDED = 1;
+        DOWNLOAD_REQUESTED = 2;
+        DOWNLOAD_STARTED = 3;
+        DOWNLOAD_FAILED = 4;
+        DOWNLOAD_UNSUPPORTED = 5;
+        DOWNLOAD_CANCELLED = 6;
+    }
+
+    enum ImageDownloadFailureReason {
+        NO_ERROR = 0;
+        INVALID_URL = 1;
+        DEVICE_BUSY = 2;
+        INSUFFICIENT_SPACE = 3;
+        UNKNOWN_ERROR = 4;
+        CANCELLED = 5;
+    }
+
+    enum ImageActivateState {
+        IMAGE_UNKNOWN = 0;
+        IMAGE_INACTIVE = 1;
+        IMAGE_ACTIVATE = 2;
+        IMAGE_ACTIVE = 3;
+        IMAGE_REVERT = 4;
+    }
+
+    // Device Identifier
+    string id = 1;
+
+    // Image unique identifier
+    string name = 2;
+
+    // URL where the image is available
+    // should include username password
+    string url = 3;
+
+    // CRC of the image to be verified aginst
+    uint32 crc = 4;
+
+    // Download state
+    ImageDownloadState download_state = 5;
+
+    // Downloaded version
+    string image_version = 6;
+
+    // Bytes downloaded
+    uint32 downloaded_bytes = 7;
+
+    // Download failure reason
+    ImageDownloadFailureReason reason= 8;
+
+    // Additional info
+    string additional_info = 9;
+
+    // Save current configuration
+    bool save_config = 10;
+
+    // Image local location
+    string local_dir = 11;
+
+    // Image activation state
+    ImageActivateState image_state = 12;
+    
+    // Image file size
+    uint32 file_size = 13;
+}
+
+message ImageDownloads {
+    repeated ImageDownload items = 2;
+}
+
+message Port {
+    option (voltha.yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    enum PortType {
+        UNKNOWN = 0;
+        ETHERNET_NNI = 1;
+        ETHERNET_UNI = 2;
+        PON_OLT = 3;
+        PON_ONU = 4;
+        VENET_OLT = 5;
+        VENET_ONU = 6;
+    }
+
+    uint32 port_no = 1;  // Device-unique port number
+
+    string label = 2;  // Arbitrary port label
+
+    PortType type = 3;  //  Type of port
+
+    AdminState.AdminState admin_state = 5;
+
+    OperStatus.OperStatus oper_status = 6;
+
+    string device_id = 7;  // Unique .id of device that owns this port
+
+    message PeerPort {
+        string device_id = 1;
+        uint32 port_no = 2;
+    }
+    repeated PeerPort peers = 8;
+
+    fixed64 rx_packets = 9;
+    fixed64 rx_bytes = 10;
+    fixed64 rx_errors = 11;
+    fixed64 tx_packets = 12;
+    fixed64 tx_bytes = 13;
+    fixed64 tx_errors = 14;
+
+}
+
+message Ports {
+    repeated Port items = 1;
+}
+
+// A Physical Device instance
+message Device {
+    option (voltha.yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    // Voltha's device identifier
+    string id = 1 [(access) = READ_ONLY];
+
+    // Device type, refers to one of the registered device types
+    string type = 2 [(access) = READ_ONLY];
+
+    // Is this device a root device. Each logical switch has one root
+    // device that is associated with the logical flow switch.
+    bool root = 3 [(access) = READ_ONLY];
+
+    // Parent device id, in the device tree (for a root device, the parent_id
+    // is the logical_device.id)
+    string parent_id = 4 [(access) = READ_ONLY];
+    uint32 parent_port_no = 20 [(access) = READ_ONLY];
+
+    // Vendor, version, serial number, etc.
+    string vendor = 5 [(access) = READ_ONLY];
+    string model = 6 [(access) = READ_ONLY];
+    string hardware_version = 7 [(access) = READ_ONLY];
+    string firmware_version = 8 [(access) = READ_ONLY];
+    // List of software on the device
+    Images images = 9 [(access) = READ_ONLY];
+    string serial_number = 10 [(access) = READ_ONLY];
+    string vendor_id = 24 [(access) = READ_ONLY];
+
+    // Addapter that takes care of device
+    string adapter = 11 [(access) = READ_ONLY];
+
+    // Device contact on vlan (if 0, no vlan)
+    uint32 vlan = 12;
+
+    message ProxyAddress {
+        string device_id = 1;  // Which device to use as proxy to this device
+        string device_type = 2; // The device type of the proxy device to use as the adapter name
+        uint32 channel_id = 3;  // Sub-address within proxy
+        uint32 channel_group_id = 4; // Channel Group index
+        string channel_termination = 5; // Channel Termination name
+        uint32 onu_id = 6; // onu identifier; optional
+        uint32 onu_session_id = 7; // session identifier for the ONU; optional
+    };
+
+    oneof address {
+        // Device contact MAC address (format: "xx:xx:xx:xx:xx:xx")
+        string mac_address = 13;
+
+        // Device contact IPv4 address (format: "a.b.c.d" or can use hostname too)
+        string ipv4_address = 14;
+
+        // Device contact IPv6 address using the canonical string form
+        // ("xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx")
+        string ipv6_address = 15;
+
+        string host_and_port = 21;
+
+    };
+    string extra_args = 23;  // Used to pass additional device specific arguments
+
+    ProxyAddress proxy_address = 19;
+
+    AdminState.AdminState admin_state = 16;
+
+    OperStatus.OperStatus oper_status = 17 [(access) = READ_ONLY];
+
+    string reason = 22 [(access) = READ_ONLY];  //  Used in FAILED state
+
+    ConnectStatus.ConnectStatus connect_status = 18 [(access) = READ_ONLY];
+
+    // TODO additional common attribute here
+
+    // Device type specific attributes
+    google.protobuf.Any custom = 64;
+
+    repeated Port ports = 128  [(child_node) = {key: "port_no"}];
+    openflow_13.Flows flows = 129 [(child_node) = {}];
+    openflow_13.FlowGroups flow_groups = 130 [(child_node) = {}];
+    // PmConfigs will eventually converted to a child node of the
+    // device to falicitata callbacks and to simplify manipulation.
+    PmConfigs pm_configs = 131 [(child_node) = {}];
+
+    repeated ImageDownload image_downloads = 133 [(child_node) = {key: "name"}];
+}
+
+message Devices {
+    repeated Device items = 1;
+}
+
+message SimulateAlarmRequest {
+    enum OperationType {
+        RAISE = 0;
+        CLEAR = 1;
+    }
+    // Device Identifier
+    string id = 1;
+    string indicator = 2;
+    string intf_id = 3;
+    string port_type_name = 4;
+    string onu_device_id = 5;
+    int32 inverse_bit_error_rate = 6;
+    int32 drift = 7;
+    int32 new_eqd = 8;
+    string onu_serial_number = 9;
+    OperationType operation = 10;
+}
diff --git a/protos/voltha_protos/events.proto b/protos/voltha_protos/events.proto
new file mode 100644
index 0000000..bd8c045
--- /dev/null
+++ b/protos/voltha_protos/events.proto
@@ -0,0 +1,195 @@
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/voltha";
+
+package voltha;
+
+import "voltha_protos/meta.proto";
+import "google/api/annotations.proto";
+
+message ConfigEventType {
+    enum ConfigEventType {
+        add = 0; // A new config has been added
+        remove = 1; // A config has been removed
+        update = 2; // A config has been updated
+    }
+}
+
+message ConfigEvent {
+    ConfigEventType.ConfigEventType type = 1;
+
+    string hash = 2; // hash for this change, can be used for quick lookup
+    string data = 3; // the actual new data, in json format
+}
+
+message KpiEventType {
+    enum KpiEventType {
+        slice = 0; // slice: a set of path/metric data for same time-stamp
+        ts = 1; // time-series: array of data for same metric
+    }
+}
+
+/*
+ * Struct to convey a dictionary of metric metadata.
+ */
+message MetricMetaData {
+    string title = 1;   // Metric group or individual metric name
+    double ts = 2;      // UTC time-stamp of data (seconds since epoch) of
+                        // when the metric or metric group was collected.
+                        // If this is a 15-min historical group, it is the
+                        // time of the collection and reporting, not the
+                        // start or end of the 15-min group interval.
+
+    string logical_device_id = 3; // The logical device ID of the VOLTHA
+                                  // (equivalent to the DPID that ONOS has
+                                  // for the VOLTHA device without the
+                                  //  'of:' prefix
+    string serial_no = 4;         // The OLT, ONU, ... device serial number
+    string device_id = 5;         // The OLT, ONU, ... physical device ID
+
+    map<string, string> context = 6; // Name value pairs that provide additional
+                                     // context information on the metrics being
+                                     // reported.
+}
+
+/*
+ * Struct to convey a dictionary of metric->value pairs. Typically used in
+ * pure shared-timestamp or shared-timestamp + shared object prefix situations.
+ */
+message MetricValuePairs {
+
+    // Metric / value pairs.
+    map<string, float> metrics = 1;
+
+}
+
+/*
+ * Struct to group metadata for a metric (or group of metrics) with the key-value
+ * pairs of collected metrics
+ */
+message MetricInformation {
+    MetricMetaData metadata = 1;
+    map<string, float> metrics = 2;
+}
+
+/*
+ * Legacy KPI Event structured.  In mid-August, the KPI event format was updated
+ *                               to a more easily parsable format. See VOL-1140
+ *                               for more information.
+ */
+message KpiEvent {
+
+    KpiEventType.KpiEventType type = 1;
+
+    // Fields used when for slice:
+
+    float ts = 2; // UTC time-stamp of data in slice mode (seconds since epoc)
+
+    map<string, MetricValuePairs> prefixes = 3;
+
+}
+
+message KpiEvent2 {
+    // Type of KPI Event
+    KpiEventType.KpiEventType type = 1;
+
+    // Fields used when for slice:
+    double ts = 2;  // UTC time-stamp of data in slice mode (seconds since epoch)
+                    // of the time this entire KpiEvent was published to the kafka bus
+
+    repeated MetricInformation slice_data = 3;
+}
+
+/*
+ * Identify to the area of the system impacted by the alarm
+ */
+message AlarmEventType {
+    enum AlarmEventType {
+        COMMUNICATION = 0;
+        ENVIRONMENT = 1;
+        EQUIPMENT = 2;
+        SERVICE = 3;
+        PROCESSING = 4;
+        SECURITY = 5;
+    }
+}
+
+/*
+ * Identify to the functional category originating the alarm
+ */
+message AlarmEventCategory {
+    enum AlarmEventCategory {
+        PON = 0;
+        OLT = 1;
+        ONT = 2;
+        ONU = 3;
+        NNI = 4;
+    }
+}
+
+/*
+ * Active state of the alarm
+ */
+message AlarmEventState {
+    enum AlarmEventState {
+        RAISED = 0;
+        CLEARED = 1;
+    }
+}
+
+/*
+ * Identify the overall impact of the alarm on the system
+ */
+message AlarmEventSeverity {
+    enum AlarmEventSeverity {
+        INDETERMINATE = 0;
+        WARNING = 1;
+        MINOR = 2;
+        MAJOR = 3;
+        CRITICAL = 4;
+    }
+}
+
+/*
+ *
+ */
+message AlarmEvent {
+    // Unique ID for this alarm.  e.g. voltha.some_olt.1234
+    string id = 1;
+
+    // Refers to the area of the system impacted by the alarm
+    AlarmEventType.AlarmEventType type = 2;
+
+    // Refers to functional category of the alarm
+    AlarmEventCategory.AlarmEventCategory category = 3;
+
+    // Current active state of the alarm
+    AlarmEventState.AlarmEventState state = 4;
+
+    // Overall impact of the alarm on the system
+    AlarmEventSeverity.AlarmEventSeverity severity = 5;
+
+    // Timestamp at which the alarm was first raised
+    float raised_ts = 6;
+
+    // Timestamp at which the alarm was reported
+    float reported_ts = 7;
+
+    // Timestamp at which the alarm has changed since it was raised
+    float changed_ts = 8;
+
+    // Identifier of the originating resource of the alarm
+    string resource_id = 9;
+
+    // Textual explanation of the alarm
+    string description = 10;
+
+    // Key/Value storage for extra information that may give context to the alarm
+    map<string, string> context = 11;
+
+    // logical device id
+    string logical_device_id = 12;
+
+    // alarm_type  name indicates clearly the name of the alarm
+    string alarm_type_name = 13;
+}
diff --git a/protos/voltha_protos/health.proto b/protos/voltha_protos/health.proto
new file mode 100644
index 0000000..a6337cf
--- /dev/null
+++ b/protos/voltha_protos/health.proto
@@ -0,0 +1,36 @@
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/voltha";
+
+package voltha;
+
+import "google/api/annotations.proto";
+import "google/protobuf/empty.proto";
+import "voltha_protos/meta.proto";
+
+// Encode health status of a Voltha instance
+message HealthStatus {
+
+    // Health states
+    enum HealthState {
+        HEALTHY = 0;  // The instance is healthy
+        OVERLOADED = 1;  // The instance is overloaded, decrease query rate
+        DYING = 2;  // The instance is in a critical condition, do not use it
+    }
+
+    // Current state of health of this Voltha instance
+    HealthState state = 1 [(access) = READ_ONLY];
+}
+
+// Health related services
+service HealthService {
+
+    // Return current health status of a Voltha instance
+    rpc GetHealthStatus(google.protobuf.Empty) returns (HealthStatus) {
+        option (google.api.http) = {
+            get: "/health"
+        };
+    }
+
+}
+
diff --git a/protos/voltha_protos/inter_container.proto b/protos/voltha_protos/inter_container.proto
new file mode 100644
index 0000000..8e160ce
--- /dev/null
+++ b/protos/voltha_protos/inter_container.proto
@@ -0,0 +1,128 @@
+syntax = "proto3";
+
+import "google/protobuf/any.proto";
+import "voltha_protos/openflow_13.proto";
+import public "voltha_protos/logical_device.proto";
+
+
+option go_package = "github.com/opencord/voltha-go/protos/inter_container";
+
+package voltha;
+
+message StrType {
+    string val = 1;
+}
+
+message IntType {
+    int64 val = 1;
+}
+
+message BoolType {
+    bool val = 1;
+}
+
+message Packet {
+    bytes payload = 1;
+}
+
+message ErrorCode {
+    enum codes {
+        UNSUPPORTED_REQUEST = 0;
+        INVALID_PARAMETERS = 1;
+    }
+}
+
+message Error {
+    ErrorCode code = 1;
+    string reason = 2;
+}
+
+enum MessageType {
+    REQUEST = 0;
+    RESPONSE = 1;
+    DEVICE_DISCOVERED=2;
+}
+
+message Header {
+    string id = 1;
+    MessageType type = 2;
+    string from_topic = 3;
+    string to_topic = 4;
+    int64 timestamp = 5;
+}
+
+message Argument {
+    string key = 1;
+    google.protobuf.Any value = 2;
+}
+
+message InterContainerMessage {
+    Header header = 1;
+    google.protobuf.Any body = 2;
+}
+
+message InterContainerRequestBody {
+    string rpc = 2;
+    repeated Argument args = 3;
+    bool response_required = 4;
+    string reply_to_topic = 5;
+}
+
+message InterContainerResponseBody {
+    bool success = 1;
+    google.protobuf.Any result = 3;
+}
+
+message SwitchCapability {
+    openflow_13.ofp_desc desc = 1;
+    openflow_13.ofp_switch_features switch_features = 2;
+}
+
+message PortCapability {
+    LogicalPort port = 1;
+}
+
+message DeviceDiscovered {
+    string id = 1;
+    string parent_id = 2;
+    string device_type = 3;
+    string publisher = 4;
+}
+
+message InterAdapterMessageType {
+    enum Types {
+        FLOW_REQUEST = 0;
+        FLOW_RESPONSE = 1;
+        OMCI_REQUEST = 2;
+        OMCI_RESPONSE = 3;
+        METRICS_REQUEST = 4;
+        METRICS_RESPONSE = 5;
+    }
+}
+
+message InterAdapterHeader {
+    string id = 1;
+    InterAdapterMessageType.Types type = 2;
+    string from_topic = 3;
+    string to_topic = 4;
+    string to_device_id = 5;
+    string proxy_device_id = 6;
+    int64 timestamp = 7;
+}
+
+message InterAdapterOmciMessage {
+    bytes message = 1; // OMCI_REQUEST or OMCI_RESPONSE
+}
+
+message InterAdapterResponseBody {
+    bool status = 1;
+    oneof payload {
+        google.protobuf.Any body = 2;
+        InterAdapterOmciMessage omci = 3; // OMCI_REQUEST or OMCI_RESPONSE
+    }
+}
+
+message InterAdapterMessage {
+    InterAdapterHeader header = 1;
+    google.protobuf.Any body = 2;
+}
diff --git a/protos/voltha_protos/logical_device.proto b/protos/voltha_protos/logical_device.proto
new file mode 100644
index 0000000..4af0a14
--- /dev/null
+++ b/protos/voltha_protos/logical_device.proto
@@ -0,0 +1,61 @@
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/voltha";
+
+package voltha;
+
+import "google/api/annotations.proto";
+import "voltha_protos/meta.proto";
+import "voltha_protos/openflow_13.proto";
+
+message LogicalPortId {
+    // unique id of logical device
+    string id = 1;
+
+    // id of the port on the logical device
+    string port_id = 2;
+}
+
+message LogicalPort {
+    string id = 1;
+    openflow_13.ofp_port ofp_port = 2;
+    string device_id = 3;
+    uint32 device_port_no = 4;
+    bool root_port = 5;
+}
+
+message LogicalPorts {
+    repeated LogicalPort items = 1;
+}
+
+message LogicalDevice {
+
+    // unique id of logical device
+    string id = 1;
+
+    // unique datapath id for the logical device (used by the SDN controller)
+    uint64 datapath_id = 2;
+
+    // device description
+    openflow_13.ofp_desc desc = 3;
+
+    // device features
+    openflow_13.ofp_switch_features switch_features = 4;
+
+    // name of the root device anchoring logical device
+    string root_device_id = 5;
+
+    // logical device ports
+    repeated LogicalPort ports = 128 [(child_node) = {key: "id"}];
+
+    // flows configured on the logical device
+    openflow_13.Flows flows = 129 [(child_node) = {}];
+
+    // flow groups configured on the logical device
+    openflow_13.FlowGroups flow_groups = 130 [(child_node) = {}];
+
+}
+
+message LogicalDevices {
+    repeated LogicalDevice items = 1;
+}
diff --git a/protos/voltha_protos/meta.proto b/protos/voltha_protos/meta.proto
new file mode 100644
index 0000000..fc02e46
--- /dev/null
+++ b/protos/voltha_protos/meta.proto
@@ -0,0 +1,57 @@
+// Copyright (c) 2015, Google Inc.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// This file contains annotation definitions that can be used to describe
+// a configuration tree.
+
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/common";
+
+package voltha;
+
+import "google/protobuf/descriptor.proto";
+
+message ChildNode {
+    string key = 1;
+}
+
+enum Access {
+
+    // read-write, stored attribute
+    CONFIG = 0;
+
+    // read-only field, stored with the model, covered by its hash
+    READ_ONLY = 1;
+
+    // A read-only attribute that is not stored in the model, not covered
+    // by its hash, its value is filled real-time upon each request.
+    REAL_TIME = 2;
+
+}
+
+extend google.protobuf.FieldOptions {
+
+    // If present, it indicates that this field is stored as external child node
+    // or children nodes in Voltha's internal configuration tree.
+    // If the field is a container field and if the option specifies a key
+    // the child objects will be addressible by that key.
+    ChildNode child_node = 7761772;
+
+    // This annotation can be used to indicate that a field is read-only,
+    // from the perspective of NBI access. Backend plugins and system
+    // internals can update the field but the update requests through the
+    // NBI will ignore for instance a field that is marked as read-only (RO).
+    Access access = 7761773;
+}
diff --git a/protos/voltha_protos/omci_alarm_db.proto b/protos/voltha_protos/omci_alarm_db.proto
new file mode 100644
index 0000000..d1cdab6
--- /dev/null
+++ b/protos/voltha_protos/omci_alarm_db.proto
@@ -0,0 +1,80 @@
+//
+// Copyright 2018 - present the original author or authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/omci";
+
+package alarm;
+
+import "voltha_protos/meta.proto";
+
+
+message AlarmAttributeData {
+    string name        = 1 [(voltha.access) = READ_ONLY];
+    string value       = 2;
+}
+
+message AlarmInstanceData {
+    uint32 instance_id      = 1 [(voltha.access) = READ_ONLY];
+    string created          = 2;
+    string modified         = 3;
+
+    repeated AlarmAttributeData attributes = 4
+    [(voltha.child_node) = {key: "name"}];
+}
+
+message AlarmClassData {
+    uint32 class_id         = 1 [(voltha.access) = READ_ONLY];
+
+    repeated AlarmInstanceData instances= 2
+    [(voltha.child_node) = {key: "instance_id"}];
+}
+
+message AlarmManagedEntity {
+    uint32 class_id  = 1 [(voltha.access) = READ_ONLY];
+    string name      = 2 [(voltha.access) = READ_ONLY];
+}
+
+message AlarmMessageType {
+    uint32 message_type = 1 [(voltha.access) = READ_ONLY];
+}
+
+message AlarmDeviceData {
+    string device_id             = 1 [(voltha.access) = READ_ONLY];
+    string created               = 2;
+    uint32 last_alarm_sequence   = 3;
+    string last_sync_time        = 4;
+    uint32 version               = 5;
+
+
+    repeated AlarmClassData classes = 6
+    [(voltha.child_node) = {key: "class_id"}];
+
+    repeated AlarmManagedEntity managed_entities = 7;
+    repeated AlarmMessageType message_types = 8;
+}
+
+message AlarmOpenOmciEventType {
+    enum OpenOmciEventType {
+        state_change = 0; // A state machine has transitioned to a new state
+    }
+}
+
+message AlarmOpenOmciEvent {
+    AlarmOpenOmciEventType.OpenOmciEventType type = 1;
+
+    string data = 2; // associated data, in json format
+}
diff --git a/protos/voltha_protos/omci_mib_db.proto b/protos/voltha_protos/omci_mib_db.proto
new file mode 100644
index 0000000..39c7972
--- /dev/null
+++ b/protos/voltha_protos/omci_mib_db.proto
@@ -0,0 +1,79 @@
+//
+// Copyright 2018 - present the original author or authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/omci";
+
+package omci;
+
+import "voltha_protos/meta.proto";
+
+
+message MibAttributeData {
+    string name        = 1 [(voltha.access) = READ_ONLY];
+    string value       = 2;
+}
+
+message MibInstanceData {
+    uint32 instance_id      = 1 [(voltha.access) = READ_ONLY];
+    string created          = 2;
+    string modified         = 3;
+
+    repeated MibAttributeData attributes = 4
+    [(voltha.child_node) = {key: "name"}];
+}
+
+message MibClassData {
+    uint32 class_id         = 1 [(voltha.access) = READ_ONLY];
+
+    repeated MibInstanceData instances= 2
+    [(voltha.child_node) = {key: "instance_id"}];
+}
+
+message ManagedEntity {
+    uint32 class_id  = 1 [(voltha.access) = READ_ONLY];
+    string name      = 2 [(voltha.access) = READ_ONLY];
+}
+
+message MessageType {
+    uint32 message_type = 1 [(voltha.access) = READ_ONLY];
+}
+
+message MibDeviceData {
+    string device_id        = 1 [(voltha.access) = READ_ONLY];
+    string created          = 2;
+    string last_sync_time   = 3;
+    uint32 mib_data_sync    = 4;
+    uint32 version          = 5;
+
+    repeated MibClassData classes = 6
+    [(voltha.child_node) = {key: "class_id"}];
+
+    repeated ManagedEntity managed_entities = 7;
+    repeated MessageType message_types = 8;
+}
+
+message OpenOmciEventType {
+    enum OpenOmciEventType {
+        state_change = 0; // A state machine has transitioned to a new state
+    }
+}
+
+message OpenOmciEvent {
+    OpenOmciEventType.OpenOmciEventType type = 1;
+
+    string data = 2; // associated data, in json format
+}
diff --git a/protos/voltha_protos/openflow_13.proto b/protos/voltha_protos/openflow_13.proto
new file mode 100644
index 0000000..5adfb72
--- /dev/null
+++ b/protos/voltha_protos/openflow_13.proto
@@ -0,0 +1,2303 @@
+/* Copyright (c) 2008 The Board of Trustees of The Leland Stanford
+ * Junior University
+ * Copyright (c) 2011, 2012 Open Networking Foundation
+ *
+ * We are making the OpenFlow specification and associated documentation
+ * (Software) available for public use and benefit with the expectation
+ * that others will use, modify and enhance the Software and contribute
+ * those enhancements back to the community. However, since we would
+ * like to make the Software available for broadest use, with as few
+ * restrictions as possible permission is hereby granted, free of
+ * charge, to any person obtaining a copy of this Software to deal in
+ * the Software under the copyrights without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * The name and trademarks of copyright holder(s) may NOT be used in
+ * advertising or publicity pertaining to the Software or any
+ * derivatives without specific, written prior permission.
+ */
+
+/* OpenFlow: protocol between controller and datapath. */
+
+/*
+ * This is a relatively straightforward rendering of OpenFlow message
+ * definitions into protocol buffer messages. We preserved the snake
+ * case syntax, and made the following changes:
+ * - all pad fields dropped
+ * - for each enum value above 0x7fffffff the MSB is dropped. For example,
+ *   0xffffffff is now 0x7fffffff.
+ * - '<type> thing[...]' is replaced with 'repeated <type> thing'
+ * - 'char thing[...]' is replaced with 'string thing'
+ * - 'uint8_t data[...]' is replaced with 'bytes data'
+ * - the following systematic changes are done to various integer types:
+ *   uint8_t  -> uint32
+ *   uint16_t -> uint32
+ *   uint32_t -> uint32
+ *   uint64_t -> uint64
+ * - removed most length, len, size fields where these values can be determined
+ *   from the explicitly encoded length of "repeated" protobuf fields.
+ * - explicit use of enum types whereever it is unambigous (and not used as
+ *   bitmask/flags value.
+ *
+ */
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/openflow_13";
+
+package openflow_13;
+
+import "google/api/annotations.proto";
+import public "voltha_protos/yang_options.proto";
+
+
+/* Version number:
+ * OpenFlow versions released: 0x01 = 1.0 ; 0x02 = 1.1 ; 0x03 = 1.2
+ *     0x04 = 1.3
+ */
+/* The most significant bit in the version field is reserved and must
+ * be set to zero.
+ */
+//#define OFP_VERSION   0x04
+//#define PIPELINE_TABLES 64
+//#define OFP_MAX_TABLE_NAME_LEN 32
+//#define OFP_MAX_PORT_NAME_LEN  16
+/* Official IANA registered port for OpenFlow. */
+//#define OFP_TCP_PORT  6653
+//#define OFP_SSL_PORT  6653
+
+//#define OFP_ETH_ALEN 6          /* Bytes in an Ethernet address. */
+
+/* Port numbering. Ports are numbered starting from 1. */
+enum ofp_port_no {
+    OFPP_INVALID    = 0;
+
+    /* Maximum number of physical and logical switch ports. */
+    OFPP_MAX        = 0x7fffff00;
+
+    /* Reserved OpenFlow Port (fake output "ports"). */
+    OFPP_IN_PORT    = 0x7ffffff8;  /* Send the packet out the input port.  This
+                                      reserved port must be explicitly used
+                                      in order to send back out of the input
+                                      port. */
+    OFPP_TABLE      = 0x7ffffff9;  /* Submit the packet to the first flow table
+                                      NB: This destination port can only be
+                                      used in packet-out messages. */
+    OFPP_NORMAL     = 0x7ffffffa;  /* Forward using non-OpenFlow pipeline. */
+    OFPP_FLOOD      = 0x7ffffffb;  /* Flood using non-OpenFlow pipeline. */
+    OFPP_ALL        = 0x7ffffffc;  /* All standard ports except input port. */
+    OFPP_CONTROLLER = 0x7ffffffd;  /* Send to controller. */
+    OFPP_LOCAL      = 0x7ffffffe;  /* Local openflow "port". */
+    OFPP_ANY        = 0x7fffffff;  /* Special value used in some requests when
+                                      no port is specified (i.e. wildcarded).*/
+};
+
+enum ofp_type {
+
+    /* Immutable messages. */
+    OFPT_HELLO                      = 0;  /* Symmetric message */
+    OFPT_ERROR                      = 1;  /* Symmetric message */
+    OFPT_ECHO_REQUEST               = 2;  /* Symmetric message */
+    OFPT_ECHO_REPLY                 = 3;  /* Symmetric message */
+    OFPT_EXPERIMENTER               = 4;  /* Symmetric message */
+
+    /* Switch configuration messages. */
+    OFPT_FEATURES_REQUEST           = 5;  /* Controller/switch message */
+    OFPT_FEATURES_REPLY             = 6;  /* Controller/switch message */
+    OFPT_GET_CONFIG_REQUEST         = 7;  /* Controller/switch message */
+    OFPT_GET_CONFIG_REPLY           = 8;  /* Controller/switch message */
+    OFPT_SET_CONFIG                 = 9;  /* Controller/switch message */
+
+    /* Asynchronous messages. */
+    OFPT_PACKET_IN                  = 10; /* Async message */
+    OFPT_FLOW_REMOVED               = 11; /* Async message */
+    OFPT_PORT_STATUS                = 12; /* Async message */
+
+    /* Controller command messages. */
+    OFPT_PACKET_OUT                 = 13; /* Controller/switch message */
+    OFPT_FLOW_MOD                   = 14; /* Controller/switch message */
+    OFPT_GROUP_MOD                  = 15; /* Controller/switch message */
+    OFPT_PORT_MOD                   = 16; /* Controller/switch message */
+    OFPT_TABLE_MOD                  = 17; /* Controller/switch message */
+
+    /* Multipart messages. */
+    OFPT_MULTIPART_REQUEST          = 18; /* Controller/switch message */
+    OFPT_MULTIPART_REPLY            = 19; /* Controller/switch message */
+
+    /* Barrier messages. */
+    OFPT_BARRIER_REQUEST            = 20; /* Controller/switch message */
+    OFPT_BARRIER_REPLY              = 21; /* Controller/switch message */
+
+    /* Queue Configuration messages. */
+    OFPT_QUEUE_GET_CONFIG_REQUEST   = 22;  /* Controller/switch message */
+    OFPT_QUEUE_GET_CONFIG_REPLY     = 23;  /* Controller/switch message */
+
+    /* Controller role change request messages. */
+    OFPT_ROLE_REQUEST               = 24; /* Controller/switch message */
+    OFPT_ROLE_REPLY                 = 25; /* Controller/switch message */
+
+    /* Asynchronous message configuration. */
+    OFPT_GET_ASYNC_REQUEST          = 26; /* Controller/switch message */
+    OFPT_GET_ASYNC_REPLY            = 27; /* Controller/switch message */
+    OFPT_SET_ASYNC                  = 28; /* Controller/switch message */
+
+    /* Meters and rate limiters configuration messages. */
+    OFPT_METER_MOD                  = 29; /* Controller/switch message */
+};
+
+/* Header on all OpenFlow packets. */
+message ofp_header {
+    uint32 version = 1;    /* OFP_VERSION. */
+    ofp_type type = 2;     /* One of the OFPT_ constants. */
+    uint32 xid = 3;        /* Transaction id associated with this packet.
+                              Replies use the same id as was in the request
+                              to facilitate pairing. */
+};
+
+/* Hello elements types.
+ */
+enum ofp_hello_elem_type {
+    OFPHET_INVALID                = 0;
+    OFPHET_VERSIONBITMAP          = 1;  /* Bitmap of version supported. */
+};
+
+/* Common header for all Hello Elements */
+message ofp_hello_elem_header {
+    ofp_hello_elem_type type = 1;       /* One of OFPHET_*. */
+    oneof element {
+        ofp_hello_elem_versionbitmap versionbitmap = 2;
+    }
+};
+
+/* Version bitmap Hello Element */
+message ofp_hello_elem_versionbitmap {
+    repeated uint32 bitmaps = 2;   /* List of bitmaps - supported versions */
+};
+
+/* OFPT_HELLO.  This message includes zero or more hello elements having
+ * variable size. Unknown elements types must be ignored/skipped, to allow
+ * for future extensions. */
+message ofp_hello {
+    //ofp_header header;
+    /* Hello element list */
+    repeated ofp_hello_elem_header elements = 1; /* 0 or more */
+};
+
+//#define OFP_DEFAULT_MISS_SEND_LEN   128
+
+enum ofp_config_flags {
+    /* Handling of IP fragments. */
+    OFPC_FRAG_NORMAL   = 0;       /* No special handling for fragments. */
+    OFPC_FRAG_DROP     = 1;       /* Drop fragments. */
+    OFPC_FRAG_REASM    = 2;       /* Reassemble (only if OFPC_IP_REASM set). */
+    OFPC_FRAG_MASK     = 3;       /* Bitmask of flags dealing with frag. */
+};
+
+/* Switch configuration. */
+message ofp_switch_config {
+    //ofp_header header;
+    uint32 flags = 1;             /* Bitmap of OFPC_* flags. */
+    uint32 miss_send_len = 2;     /* Max bytes of packet that datapath
+                                     should send to the controller. See
+                                     ofp_controller_max_len for valid values.
+                                   */
+};
+
+/* Flags to configure the table. Reserved for future use. */
+enum ofp_table_config {
+    OFPTC_INVALID = 0;
+    OFPTC_DEPRECATED_MASK = 3;     /* Deprecated bits */
+};
+
+/* Table numbering. Tables can use any number up to OFPT_MAX. */
+enum ofp_table {
+
+    OFPTT_INVALID = 0;
+
+    /* Last usable table number. */
+    OFPTT_MAX        = 0xfe;
+
+    /* Fake tables. */
+    OFPTT_ALL        = 0xff;   /* Wildcard table used for table config,
+                                  flow stats and flow deletes. */
+};
+
+
+/* Configure/Modify behavior of a flow table */
+message ofp_table_mod {
+    //ofp_header header;
+    uint32 table_id = 1;  /* ID of the table, OFPTT_ALL indicates all tables */
+    uint32 config = 2;    /* Bitmap of OFPTC_* flags */
+};
+
+/* Capabilities supported by the datapath. */
+enum ofp_capabilities {
+    OFPC_INVALID        = 0;
+    OFPC_FLOW_STATS     = 1;    /* Flow statistics. */
+    OFPC_TABLE_STATS    = 2;    /* Table statistics. */
+    OFPC_PORT_STATS     = 4;    /* Port statistics. */
+    OFPC_GROUP_STATS    = 8;    /* Group statistics. */
+    OFPC_IP_REASM       = 32;   /* Can reassemble IP fragments. */
+    OFPC_QUEUE_STATS    = 64;   /* Queue statistics. */
+    OFPC_PORT_BLOCKED   = 256;  /* Switch will block looping ports. */
+};
+
+/* Flags to indicate behavior of the physical port.  These flags are
+ * used in ofp_port to describe the current configuration.  They are
+ * used in the ofp_port_mod message to configure the port's behavior.
+ */
+enum ofp_port_config {
+    OFPPC_INVALID      = 0;
+    OFPPC_PORT_DOWN    = 1;   /* Port is administratively down. */
+
+    OFPPC_NO_RECV      = 4;   /* Drop all packets received by port. */
+    OFPPC_NO_FWD       = 32;  /* Drop packets forwarded to port. */
+    OFPPC_NO_PACKET_IN = 64;  /* Do not send packet-in msgs for port. */
+};
+
+/* Current state of the physical port.  These are not configurable from
+ * the controller.
+ */
+enum ofp_port_state {
+    OFPPS_INVALID      = 0;
+    OFPPS_LINK_DOWN    = 1;  /* No physical link present. */
+    OFPPS_BLOCKED      = 2;  /* Port is blocked */
+    OFPPS_LIVE         = 4;  /* Live for Fast Failover Group. */
+};
+
+/* Features of ports available in a datapath. */
+enum ofp_port_features {
+    OFPPF_INVALID    = 0;
+    OFPPF_10MB_HD    = 1;      /* 10 Mb half-duplex rate support. */
+    OFPPF_10MB_FD    = 2;      /* 10 Mb full-duplex rate support. */
+    OFPPF_100MB_HD   = 4;      /* 100 Mb half-duplex rate support. */
+    OFPPF_100MB_FD   = 8;      /* 100 Mb full-duplex rate support. */
+    OFPPF_1GB_HD     = 16;     /* 1 Gb half-duplex rate support. */
+    OFPPF_1GB_FD     = 32;     /* 1 Gb full-duplex rate support. */
+    OFPPF_10GB_FD    = 64;     /* 10 Gb full-duplex rate support. */
+    OFPPF_40GB_FD    = 128;    /* 40 Gb full-duplex rate support. */
+    OFPPF_100GB_FD   = 256;    /* 100 Gb full-duplex rate support. */
+    OFPPF_1TB_FD     = 512;    /* 1 Tb full-duplex rate support. */
+    OFPPF_OTHER      = 1024;   /* Other rate, not in the list. */
+    OFPPF_COPPER     = 2048;   /* Copper medium. */
+    OFPPF_FIBER      = 4096;   /* Fiber medium. */
+    OFPPF_AUTONEG    = 8192;   /* Auto-negotiation. */
+    OFPPF_PAUSE      = 16384;  /* Pause. */
+    OFPPF_PAUSE_ASYM = 32768;  /* Asymmetric pause. */
+};
+
+/* Description of a port */
+message ofp_port {
+    uint32 port_no = 1;
+    repeated uint32 hw_addr = 2; // [OFP_ETH_ALEN];
+    string name = 3;             /* Null-terminated */
+
+    uint32 config = 4;           /* Bitmap of OFPPC_* flags. */
+    uint32 state = 5;            /* Bitmap of OFPPS_* flags. */
+
+    /* Bitmaps of OFPPF_* that describe features.  All bits zeroed if
+     * unsupported or unavailable. */
+    uint32 curr = 6;           /* Current features. */
+    uint32 advertised = 7;     /* Features being advertised by the port. */
+    uint32 supported = 8;      /* Features supported by the port. */
+    uint32 peer = 9;           /* Features advertised by peer. */
+    uint32 curr_speed = 10;    /* Current port bitrate in kbps. */
+    uint32 max_speed = 11;     /* Max port bitrate in kbps */
+};
+
+/* Switch features. */
+message ofp_switch_features {
+    //ofp_header header;
+    uint64 datapath_id = 1;   /* Datapath unique ID.  The lower 48-bits are for
+                                 a MAC address, while the upper 16-bits are
+                                 implementer-defined. */
+
+    uint32 n_buffers = 2;     /* Max packets buffered at once. */
+
+    uint32 n_tables = 3;      /* Number of tables supported by datapath. */
+    uint32 auxiliary_id = 4;  /* Identify auxiliary connections */
+
+    /* Features. */
+    uint32 capabilities = 5;  /* Bitmap of support "ofp_capabilities". */
+};
+
+/* What changed about the physical port */
+enum ofp_port_reason {
+    OFPPR_ADD     = 0;         /* The port was added. */
+    OFPPR_DELETE  = 1;         /* The port was removed. */
+    OFPPR_MODIFY  = 2;         /* Some attribute of the port has changed. */
+};
+
+/* A physical port has changed in the datapath */
+message ofp_port_status {
+    //ofp_header header;
+    ofp_port_reason reason = 1; /* One of OFPPR_*. */
+    ofp_port desc = 2;
+};
+
+/* Modify behavior of the physical port */
+message ofp_port_mod {
+    //ofp_header header;
+    uint32 port_no = 1;
+    repeated uint32 hw_addr = 2; //[OFP_ETH_ALEN];
+                                      /* The hardware address is not
+                                         configurable.  This is used to
+                                         sanity-check the request, so it must
+                                         be the same as returned in an
+                                         ofp_port struct. */
+    uint32 config = 3;        /* Bitmap of OFPPC_* flags. */
+    uint32 mask = 4;          /* Bitmap of OFPPC_* flags to be changed. */
+
+    uint32 advertise = 5;     /* Bitmap of OFPPF_*.  Zero all bits to prevent
+                                 any action taking place. */
+};
+
+/* ## -------------------------- ## */
+/* ## OpenFlow Extensible Match. ## */
+/* ## -------------------------- ## */
+
+/* The match type indicates the match structure (set of fields that compose the
+ * match) in use. The match type is placed in the type field at the beginning
+ * of all match structures. The "OpenFlow Extensible Match" type corresponds
+ * to OXM TLV format described below and must be supported by all OpenFlow
+ * switches. Extensions that define other match types may be published on the
+ * ONF wiki. Support for extensions is optional.
+ */
+enum ofp_match_type {
+    OFPMT_STANDARD = 0;       /* Deprecated. */
+    OFPMT_OXM      = 1;       /* OpenFlow Extensible Match */
+};
+
+/* Fields to match against flows */
+message ofp_match {
+    ofp_match_type type = 1;         /* One of OFPMT_* */
+    repeated ofp_oxm_field oxm_fields = 2;  /* 0 or more */
+};
+
+/* Components of a OXM TLV header.
+ * Those macros are not valid for the experimenter class, macros for the
+ * experimenter class will depend on the experimenter header used. */
+//#define OXM_HEADER__(CLASS, FIELD, HASMASK, LENGTH) \
+//    (((CLASS) << 16) | ((FIELD) << 9) | ((HASMASK) << 8) | (LENGTH))
+//#define OXM_HEADER(CLASS, FIELD, LENGTH) \
+//    OXM_HEADER__(CLASS, FIELD, 0, LENGTH)
+//#define OXM_HEADER_W(CLASS, FIELD, LENGTH) \
+//    OXM_HEADER__(CLASS, FIELD, 1, (LENGTH) * 2)
+//#define OXM_CLASS(HEADER) ((HEADER) >> 16)
+//#define OXM_FIELD(HEADER) (((HEADER) >> 9) & 0x7f)
+//#define OXM_TYPE(HEADER) (((HEADER) >> 9) & 0x7fffff)
+//#define OXM_HASMASK(HEADER) (((HEADER) >> 8) & 1)
+//#define OXM_LENGTH(HEADER) ((HEADER) & 0xff)
+//
+//#define OXM_MAKE_WILD_HEADER(HEADER) \
+//    OXM_HEADER_W(OXM_CLASS(HEADER), OXM_FIELD(HEADER), OXM_LENGTH(HEADER))
+
+/* OXM Class IDs.
+ * The high order bit differentiate reserved classes from member classes.
+ * Classes 0x0000 to 0x7FFF are member classes, allocated by ONF.
+ * Classes 0x8000 to 0xFFFE are reserved classes, reserved for standardisation.
+ */
+enum ofp_oxm_class {
+    OFPXMC_NXM_0          = 0x0000;    /* Backward compatibility with NXM */
+    OFPXMC_NXM_1          = 0x0001;    /* Backward compatibility with NXM */
+    OFPXMC_OPENFLOW_BASIC = 0x8000;    /* Basic class for OpenFlow */
+    OFPXMC_EXPERIMENTER   = 0xFFFF;    /* Experimenter class */
+};
+
+/* OXM Flow field types for OpenFlow basic class. */
+enum oxm_ofb_field_types {
+    OFPXMT_OFB_IN_PORT        = 0;  /* Switch input port. */
+    OFPXMT_OFB_IN_PHY_PORT    = 1;  /* Switch physical input port. */
+    OFPXMT_OFB_METADATA       = 2;  /* Metadata passed between tables. */
+    OFPXMT_OFB_ETH_DST        = 3;  /* Ethernet destination address. */
+    OFPXMT_OFB_ETH_SRC        = 4;  /* Ethernet source address. */
+    OFPXMT_OFB_ETH_TYPE       = 5;  /* Ethernet frame type. */
+    OFPXMT_OFB_VLAN_VID       = 6;  /* VLAN id. */
+    OFPXMT_OFB_VLAN_PCP       = 7;  /* VLAN priority. */
+    OFPXMT_OFB_IP_DSCP        = 8;  /* IP DSCP (6 bits in ToS field). */
+    OFPXMT_OFB_IP_ECN         = 9;  /* IP ECN (2 bits in ToS field). */
+    OFPXMT_OFB_IP_PROTO       = 10; /* IP protocol. */
+    OFPXMT_OFB_IPV4_SRC       = 11; /* IPv4 source address. */
+    OFPXMT_OFB_IPV4_DST       = 12; /* IPv4 destination address. */
+    OFPXMT_OFB_TCP_SRC        = 13; /* TCP source port. */
+    OFPXMT_OFB_TCP_DST        = 14; /* TCP destination port. */
+    OFPXMT_OFB_UDP_SRC        = 15; /* UDP source port. */
+    OFPXMT_OFB_UDP_DST        = 16; /* UDP destination port. */
+    OFPXMT_OFB_SCTP_SRC       = 17; /* SCTP source port. */
+    OFPXMT_OFB_SCTP_DST       = 18; /* SCTP destination port. */
+    OFPXMT_OFB_ICMPV4_TYPE    = 19; /* ICMP type. */
+    OFPXMT_OFB_ICMPV4_CODE    = 20; /* ICMP code. */
+    OFPXMT_OFB_ARP_OP         = 21; /* ARP opcode. */
+    OFPXMT_OFB_ARP_SPA        = 22; /* ARP source IPv4 address. */
+    OFPXMT_OFB_ARP_TPA        = 23; /* ARP target IPv4 address. */
+    OFPXMT_OFB_ARP_SHA        = 24; /* ARP source hardware address. */
+    OFPXMT_OFB_ARP_THA        = 25; /* ARP target hardware address. */
+    OFPXMT_OFB_IPV6_SRC       = 26; /* IPv6 source address. */
+    OFPXMT_OFB_IPV6_DST       = 27; /* IPv6 destination address. */
+    OFPXMT_OFB_IPV6_FLABEL    = 28; /* IPv6 Flow Label */
+    OFPXMT_OFB_ICMPV6_TYPE    = 29; /* ICMPv6 type. */
+    OFPXMT_OFB_ICMPV6_CODE    = 30; /* ICMPv6 code. */
+    OFPXMT_OFB_IPV6_ND_TARGET = 31; /* Target address for ND. */
+    OFPXMT_OFB_IPV6_ND_SLL    = 32; /* Source link-layer for ND. */
+    OFPXMT_OFB_IPV6_ND_TLL    = 33; /* Target link-layer for ND. */
+    OFPXMT_OFB_MPLS_LABEL     = 34; /* MPLS label. */
+    OFPXMT_OFB_MPLS_TC        = 35; /* MPLS TC. */
+    OFPXMT_OFB_MPLS_BOS       = 36; /* MPLS BoS bit. */
+    OFPXMT_OFB_PBB_ISID       = 37; /* PBB I-SID. */
+    OFPXMT_OFB_TUNNEL_ID      = 38; /* Logical Port Metadata. */
+    OFPXMT_OFB_IPV6_EXTHDR    = 39; /* IPv6 Extension Header pseudo-field */
+};
+
+/* OXM Flow match fields */
+message ofp_oxm_field {
+    ofp_oxm_class oxm_class = 1;
+    oneof field {
+        /* 2 and 3 reserved for NXM_0 and NXM-1 OXM classes */
+        ofp_oxm_ofb_field ofb_field = 4;
+        ofp_oxm_experimenter_field experimenter_field = 5;
+    }
+}
+
+/* OXM OpenFlow Basic Match Field */
+message ofp_oxm_ofb_field {
+    oxm_ofb_field_types type = 1;
+    bool has_mask = 2;
+    oneof value {
+
+        /* OpenFlow port on which the packet was received.
+         * May be a physical port, a logical port, or the reserved port OFPP_LOCAL
+         *
+         * Prereqs: None.
+         *
+         * Format: 32-bit integer in network byte order.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_IN_PORT    OXM_HEADER  (0x8000, OFPXMT_OFB_IN_PORT, 4)
+        uint32 port = 3; /* Used for OFPXMT_OFB_IN_PORT */
+
+        /* Physical port on which the packet was received.
+         *
+         * Consider a packet received on a tunnel interface defined over a link
+         * aggregation group (LAG) with two physical port members.  If the tunnel
+         * interface is the logical port bound to OpenFlow.  In this case,
+         * OFPXMT_OF_IN_PORT is the tunnel's port number and OFPXMT_OF_IN_PHY_PORT is
+         * the physical port number of the LAG on which the tunnel is configured.
+         *
+         * When a packet is received directly on a physical port and not processed by a
+         * logical port, OFPXMT_OF_IN_PORT and OFPXMT_OF_IN_PHY_PORT have the same
+         * value.
+         *
+         * This field is usually not available in a regular match and only available
+         * in ofp_packet_in messages when it's different from OXM_OF_IN_PORT.
+         *
+         * Prereqs: OXM_OF_IN_PORT must be present.
+         *
+         * Format: 32-bit integer in network byte order.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_IN_PHY_PORT OXM_HEADER  (0x8000, OFPXMT_OFB_IN_PHY_PORT, 4)
+        uint32 physical_port = 4; /* Used for OFPXMT_OF_IN_PHY_PORT */
+
+        /* Table metadata.
+         *
+         * Prereqs: None.
+         *
+         * Format: 64-bit integer in network byte order.
+         *
+         * Masking: Arbitrary masks.
+         */
+        //#define OXM_OF_METADATA   OXM_HEADER  (0x8000, OFPXMT_OFB_METADATA, 8)
+        //#define OXM_OF_METADATA_W OXM_HEADER_W(0x8000, OFPXMT_OFB_METADATA, 8)
+        uint64 table_metadata = 5; /* Used for OFPXMT_OFB_METADATA */
+
+        /* Source or destination address in Ethernet header.
+         *
+         * Prereqs: None.
+         *
+         * Format: 48-bit Ethernet MAC address.
+         *
+         * Masking: Arbitrary masks. */
+        //#define OXM_OF_ETH_DST    OXM_HEADER  (0x8000, OFPXMT_OFB_ETH_DST, 6)
+        //#define OXM_OF_ETH_DST_W  OXM_HEADER_W(0x8000, OFPXMT_OFB_ETH_DST, 6)
+        //#define OXM_OF_ETH_SRC    OXM_HEADER  (0x8000, OFPXMT_OFB_ETH_SRC, 6)
+        //#define OXM_OF_ETH_SRC_W  OXM_HEADER_W(0x8000, OFPXMT_OFB_ETH_SRC, 6)
+        bytes eth_dst = 6; /* Used for OFPXMT_OFB_ETH_DST (exactly 6 bytes) */
+        bytes eth_src = 7; /* Used for OFPXMT_OFB_ETH_SRC (exactly 6 bytes) */
+
+        /* Packet's Ethernet type.
+         *
+         * Prereqs: None.
+         *
+         * Format: 16-bit integer in network byte order.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_ETH_TYPE   OXM_HEADER  (0x8000, OFPXMT_OFB_ETH_TYPE,2)
+        uint32 eth_type = 8; /* Used for OFPXMT_OFB_ETH_TYPE */
+
+        /* 802.1Q VID.
+         *
+         * For a packet with an 802.1Q header, this is the VLAN-ID (VID) from the
+         * outermost tag, with the CFI bit forced to 1. For a packet with no 802.1Q
+         * header, this has value OFPVID_NONE.
+         *
+         * Prereqs: None.
+         *
+         * Format: 16-bit integer in network byte order with bit 13 indicating
+         * presence of VLAN header and 3 most-significant bits forced to 0.
+         * Only the lower 13 bits have meaning.
+         *
+         * Masking: Arbitrary masks.
+         *
+         * This field can be used in various ways:
+         *
+         *   - If it is not constrained at all, the nx_match matches packets without
+         *     an 802.1Q header or with an 802.1Q header that has any VID value.
+         *
+         *   - Testing for an exact match with 0x0 matches only packets without
+         *     an 802.1Q header.
+         *
+         *   - Testing for an exact match with a VID value with CFI=1 matches packets
+         *     that have an 802.1Q header with a specified VID.
+         *
+         *   - Testing for an exact match with a nonzero VID value with CFI=0 does
+         *     not make sense.  The switch may reject this combination.
+         *
+         *   - Testing with nxm_value=0, nxm_mask=0x0fff matches packets with no 802.1Q
+         *     header or with an 802.1Q header with a VID of 0.
+         *
+         *   - Testing with nxm_value=0x1000, nxm_mask=0x1000 matches packets with
+         *     an 802.1Q header that has any VID value.
+         */
+        //#define OXM_OF_VLAN_VID   OXM_HEADER  (0x8000, OFPXMT_OFB_VLAN_VID, 2)
+        //#define OXM_OF_VLAN_VID_W OXM_HEADER_W(0x8000, OFPXMT_OFB_VLAN_VID, 2)
+        uint32 vlan_vid = 9; /* Used for OFPXMT_OFB_VLAN_VID */
+
+        /* 802.1Q PCP.
+         *
+         * For a packet with an 802.1Q header, this is the VLAN-PCP from the
+         * outermost tag.  For a packet with no 802.1Q header, this has value
+         * 0.
+         *
+         * Prereqs: OXM_OF_VLAN_VID must be different from OFPVID_NONE.
+         *
+         * Format: 8-bit integer with 5 most-significant bits forced to 0.
+         * Only the lower 3 bits have meaning.
+         *
+         * Masking: Not maskable.
+         */
+        //#define OXM_OF_VLAN_PCP   OXM_HEADER  (0x8000, OFPXMT_OFB_VLAN_PCP, 1)
+        uint32 vlan_pcp = 10; /* Used for OFPXMT_OFB_VLAN_PCP */
+
+        /* The Diff Serv Code Point (DSCP) bits of the IP header.
+         * Part of the IPv4 ToS field or the IPv6 Traffic Class field.
+         *
+         * Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
+         *
+         * Format: 8-bit integer with 2 most-significant bits forced to 0.
+         * Only the lower 6 bits have meaning.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_IP_DSCP     OXM_HEADER  (0x8000, OFPXMT_OFB_IP_DSCP, 1)
+        uint32 ip_dscp = 11; /* Used for OFPXMT_OFB_IP_DSCP */
+
+        /* The ECN bits of the IP header.
+         * Part of the IPv4 ToS field or the IPv6 Traffic Class field.
+         *
+         * Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
+         *
+         * Format: 8-bit integer with 6 most-significant bits forced to 0.
+         * Only the lower 2 bits have meaning.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_IP_ECN     OXM_HEADER  (0x8000, OFPXMT_OFB_IP_ECN, 1)
+        uint32 ip_ecn = 12; /* Used for OFPXMT_OFB_IP_ECN */
+
+        /* The "protocol" byte in the IP header.
+         *
+         * Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
+         *
+         * Format: 8-bit integer.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_IP_PROTO   OXM_HEADER  (0x8000, OFPXMT_OFB_IP_PROTO, 1)
+        uint32 ip_proto = 13; /* Used for OFPXMT_OFB_IP_PROTO */
+
+        /* The source or destination address in the IP header.
+         *
+         * Prereqs: OXM_OF_ETH_TYPE must match 0x0800 exactly.
+         *
+         * Format: 32-bit integer in network byte order.
+         *
+         * Masking: Arbitrary masks.
+         */
+        //#define OXM_OF_IPV4_SRC     OXM_HEADER  (0x8000, OFPXMT_OFB_IPV4_SRC, 4)
+        //#define OXM_OF_IPV4_SRC_W   OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV4_SRC, 4)
+        //#define OXM_OF_IPV4_DST     OXM_HEADER  (0x8000, OFPXMT_OFB_IPV4_DST, 4)
+        //#define OXM_OF_IPV4_DST_W   OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV4_DST, 4)
+        uint32 ipv4_src = 14; /* Used for OFPXMT_OFB_IPV4_SRC */
+        uint32 ipv4_dst = 15; /* Used for OFPXMT_OFB_IPV4_DST */
+
+        /* The source or destination port in the TCP header.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
+         *   OXM_OF_IP_PROTO must match 6 exactly.
+         *
+         * Format: 16-bit integer in network byte order.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_TCP_SRC    OXM_HEADER  (0x8000, OFPXMT_OFB_TCP_SRC, 2)
+        //#define OXM_OF_TCP_DST    OXM_HEADER  (0x8000, OFPXMT_OFB_TCP_DST, 2)
+        uint32 tcp_src = 16; /* Used for OFPXMT_OFB_TCP_SRC */
+        uint32 tcp_dst = 17; /* Used for OFPXMT_OFB_TCP_DST */
+
+        /* The source or destination port in the UDP header.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match either 0x0800 or 0x86dd.
+         *   OXM_OF_IP_PROTO must match 17 exactly.
+         *
+         * Format: 16-bit integer in network byte order.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_UDP_SRC    OXM_HEADER  (0x8000, OFPXMT_OFB_UDP_SRC, 2)
+        //#define OXM_OF_UDP_DST    OXM_HEADER  (0x8000, OFPXMT_OFB_UDP_DST, 2)
+        uint32 udp_src = 18; /* Used for OFPXMT_OFB_UDP_SRC */
+        uint32 udp_dst = 19; /* Used for OFPXMT_OFB_UDP_DST */
+
+        /* The source or destination port in the SCTP header.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match either 0x0800 or 0x86dd.
+         *   OXM_OF_IP_PROTO must match 132 exactly.
+         *
+         * Format: 16-bit integer in network byte order.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_SCTP_SRC   OXM_HEADER  (0x8000, OFPXMT_OFB_SCTP_SRC, 2)
+        //#define OXM_OF_SCTP_DST   OXM_HEADER  (0x8000, OFPXMT_OFB_SCTP_DST, 2)
+        uint32 sctp_src = 20; /* Used for OFPXMT_OFB_SCTP_SRC */
+        uint32 sctp_dst = 21; /* Used for OFPXMT_OFB_SCTP_DST */
+
+        /* The type or code in the ICMP header.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x0800 exactly.
+         *   OXM_OF_IP_PROTO must match 1 exactly.
+         *
+         * Format: 8-bit integer.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_ICMPV4_TYPE  OXM_HEADER  (0x8000, OFPXMT_OFB_ICMPV4_TYPE, 1)
+        //#define OXM_OF_ICMPV4_CODE  OXM_HEADER  (0x8000, OFPXMT_OFB_ICMPV4_CODE, 1)
+        uint32 icmpv4_type = 22; /* Used for OFPXMT_OFB_ICMPV4_TYPE */
+        uint32 icmpv4_code = 23; /* Used for OFPXMT_OFB_ICMPV4_CODE */
+
+        /* ARP opcode.
+         *
+         * For an Ethernet+IP ARP packet, the opcode in the ARP header.  Always 0
+         * otherwise.
+         *
+         * Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly.
+         *
+         * Format: 16-bit integer in network byte order.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_ARP_OP     OXM_HEADER  (0x8000, OFPXMT_OFB_ARP_OP, 2)
+        uint32 arp_op = 24; /* Used for OFPXMT_OFB_ARP_OP */
+
+        /* For an Ethernet+IP ARP packet, the source or target protocol address
+         * in the ARP header.  Always 0 otherwise.
+         *
+         * Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly.
+         *
+         * Format: 32-bit integer in network byte order.
+         *
+         * Masking: Arbitrary masks.
+         */
+        //#define OXM_OF_ARP_SPA    OXM_HEADER  (0x8000, OFPXMT_OFB_ARP_SPA, 4)
+        //#define OXM_OF_ARP_SPA_W  OXM_HEADER_W(0x8000, OFPXMT_OFB_ARP_SPA, 4)
+        //#define OXM_OF_ARP_TPA    OXM_HEADER  (0x8000, OFPXMT_OFB_ARP_TPA, 4)
+        //#define OXM_OF_ARP_TPA_W  OXM_HEADER_W(0x8000, OFPXMT_OFB_ARP_TPA, 4)
+        uint32 arp_spa = 25; /* For OFPXMT_OFB_ARP_SPA */
+        uint32 arp_tpa = 26; /* For OFPXMT_OFB_ARP_TPA */
+
+        /* For an Ethernet+IP ARP packet, the source or target hardware address
+         * in the ARP header.  Always 0 otherwise.
+         *
+         * Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly.
+         *
+         * Format: 48-bit Ethernet MAC address.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_ARP_SHA    OXM_HEADER   (0x8000, OFPXMT_OFB_ARP_SHA, 6)
+        //#define OXM_OF_ARP_SHA_W  OXM_HEADER_W (0x8000, OFPXMT_OFB_ARP_SHA, 6)
+        //#define OXM_OF_ARP_THA    OXM_HEADER   (0x8000, OFPXMT_OFB_ARP_THA, 6)
+        //#define OXM_OF_ARP_THA_W  OXM_HEADER_W (0x8000, OFPXMT_OFB_ARP_THA, 6)
+        bytes arp_sha = 27; /* For OFPXMT_OFB_ARP_SHA (6 bytes) */
+        bytes arp_tha = 28; /* For OFPXMT_OFB_ARP_THA (6 bytes) */
+
+        /* The source or destination address in the IPv6 header.
+         *
+         * Prereqs: OXM_OF_ETH_TYPE must match 0x86dd exactly.
+         *
+         * Format: 128-bit IPv6 address.
+         *
+         * Masking: Arbitrary masks.
+         */
+        //#define OXM_OF_IPV6_SRC    OXM_HEADER  (0x8000, OFPXMT_OFB_IPV6_SRC, 16)
+        //#define OXM_OF_IPV6_SRC_W  OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_SRC, 16)
+        //#define OXM_OF_IPV6_DST    OXM_HEADER  (0x8000, OFPXMT_OFB_IPV6_DST, 16)
+        //#define OXM_OF_IPV6_DST_W  OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_DST, 16)
+        bytes ipv6_src = 29; /* For OFPXMT_OFB_IPV6_SRC */
+        bytes ipv6_dst = 30; /* For OFPXMT_OFB_IPV6_DST */
+
+        /* The IPv6 Flow Label
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x86dd exactly
+         *
+         * Format: 32-bit integer with 12 most-significant bits forced to 0.
+         * Only the lower 20 bits have meaning.
+         *
+         * Masking: Arbitrary masks.
+         */
+        //#define OXM_OF_IPV6_FLABEL   OXM_HEADER  (0x8000, OFPXMT_OFB_IPV6_FLABEL, 4)
+        //#define OXM_OF_IPV6_FLABEL_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_FLABEL, 4)
+        uint32 ipv6_flabel = 31; /* For OFPXMT_OFB_IPV6_FLABEL */
+
+        /* The type or code in the ICMPv6 header.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x86dd exactly.
+         *   OXM_OF_IP_PROTO must match 58 exactly.
+         *
+         * Format: 8-bit integer.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_ICMPV6_TYPE OXM_HEADER  (0x8000, OFPXMT_OFB_ICMPV6_TYPE, 1)
+        //#define OXM_OF_ICMPV6_CODE OXM_HEADER  (0x8000, OFPXMT_OFB_ICMPV6_CODE, 1)
+        uint32 icmpv6_type = 32; /* For OFPXMT_OFB_ICMPV6_TYPE */
+        uint32 icmpv6_code = 33; /* For OFPXMT_OFB_ICMPV6_CODE */
+
+        /* The target address in an IPv6 Neighbor Discovery message.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x86dd exactly.
+         *   OXM_OF_IP_PROTO must match 58 exactly.
+         *   OXM_OF_ICMPV6_TYPE must be either 135 or 136.
+         *
+         * Format: 128-bit IPv6 address.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_IPV6_ND_TARGET OXM_HEADER \
+        //    (0x8000, OFPXMT_OFB_IPV6_ND_TARGET, 16)
+        bytes ipv6_nd_target = 34; /* For OFPXMT_OFB_IPV6_ND_TARGET */
+
+        /* The source link-layer address option in an IPv6 Neighbor Discovery
+         * message.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x86dd exactly.
+         *   OXM_OF_IP_PROTO must match 58 exactly.
+         *   OXM_OF_ICMPV6_TYPE must be exactly 135.
+         *
+         * Format: 48-bit Ethernet MAC address.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_IPV6_ND_SLL  OXM_HEADER  (0x8000, OFPXMT_OFB_IPV6_ND_SLL, 6)
+        bytes ipv6_nd_ssl = 35; /* For OFPXMT_OFB_IPV6_ND_SLL */
+
+        /* The target link-layer address option in an IPv6 Neighbor Discovery
+         * message.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x86dd exactly.
+         *   OXM_OF_IP_PROTO must match 58 exactly.
+         *   OXM_OF_ICMPV6_TYPE must be exactly 136.
+         *
+         * Format: 48-bit Ethernet MAC address.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_IPV6_ND_TLL  OXM_HEADER  (0x8000, OFPXMT_OFB_IPV6_ND_TLL, 6)
+        bytes ipv6_nd_tll = 36; /* For OFPXMT_OFB_IPV6_ND_TLL */
+
+        /* The LABEL in the first MPLS shim header.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly.
+         *
+         * Format: 32-bit integer in network byte order with 12 most-significant
+         * bits forced to 0. Only the lower 20 bits have meaning.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_MPLS_LABEL  OXM_HEADER  (0x8000, OFPXMT_OFB_MPLS_LABEL, 4)
+        uint32 mpls_label = 37; /* For OFPXMT_OFB_MPLS_LABEL */
+
+        /* The TC in the first MPLS shim header.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly.
+         *
+         * Format: 8-bit integer with 5 most-significant bits forced to 0.
+         * Only the lower 3 bits have meaning.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_MPLS_TC     OXM_HEADER  (0x8000, OFPXMT_OFB_MPLS_TC, 1)
+        uint32 mpls_tc = 38; /* For OFPXMT_OFB_MPLS_TC */
+
+        /* The BoS bit in the first MPLS shim header.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly.
+         *
+         * Format: 8-bit integer with 7 most-significant bits forced to 0.
+         * Only the lowest bit have a meaning.
+         *
+         * Masking: Not maskable. */
+        //#define OXM_OF_MPLS_BOS     OXM_HEADER  (0x8000, OFPXMT_OFB_MPLS_BOS, 1)
+        uint32 mpls_bos = 39; /* For OFPXMT_OFB_MPLS_BOS */
+
+        /* IEEE 802.1ah I-SID.
+         *
+         * For a packet with a PBB header, this is the I-SID from the
+         * outermost service tag.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x88E7 exactly.
+         *
+         * Format: 24-bit integer in network byte order.
+         *
+         * Masking: Arbitrary masks. */
+        //#define OXM_OF_PBB_ISID   OXM_HEADER  (0x8000, OFPXMT_OFB_PBB_ISID, 3)
+        //#define OXM_OF_PBB_ISID_W OXM_HEADER_W(0x8000, OFPXMT_OFB_PBB_ISID, 3)
+        uint32 pbb_isid = 40; /* For OFPXMT_OFB_PBB_ISID */
+
+        /* Logical Port Metadata.
+         *
+         * Metadata associated with a logical port.
+         * If the logical port performs encapsulation and decapsulation, this
+         * is the demultiplexing field from the encapsulation header.
+         * For example, for a packet received via GRE tunnel including a (32-bit) key,
+         * the key is stored in the low 32-bits and the high bits are zeroed.
+         * For a MPLS logical port, the low 20 bits represent the MPLS Label.
+         * For a VxLAN logical port, the low 24 bits represent the VNI.
+         * If the packet is not received through a logical port, the value is 0.
+         *
+         * Prereqs: None.
+         *
+         * Format: 64-bit integer in network byte order.
+         *
+         * Masking: Arbitrary masks. */
+        //#define OXM_OF_TUNNEL_ID    OXM_HEADER  (0x8000, OFPXMT_OFB_TUNNEL_ID, 8)
+        //#define OXM_OF_TUNNEL_ID_W  OXM_HEADER_W(0x8000, OFPXMT_OFB_TUNNEL_ID, 8)
+        uint64 tunnel_id = 41; /* For OFPXMT_OFB_TUNNEL_ID */
+
+        /* The IPv6 Extension Header pseudo-field.
+         *
+         * Prereqs:
+         *   OXM_OF_ETH_TYPE must match 0x86dd exactly
+         *
+         * Format: 16-bit integer with 7 most-significant bits forced to 0.
+         * Only the lower 9 bits have meaning.
+         *
+         * Masking: Maskable. */
+        //#define OXM_OF_IPV6_EXTHDR   OXM_HEADER  (0x8000, OFPXMT_OFB_IPV6_EXTHDR, 2)
+        //#define OXM_OF_IPV6_EXTHDR_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_EXTHDR, 2)
+        uint32 ipv6_exthdr = 42; /* For OFPXMT_OFB_IPV6_EXTHDR */
+
+    }
+
+    /* Optional mask values (must be present when has_mask is true */
+    oneof mask {
+        uint64 table_metadata_mask = 105; /* For OFPXMT_OFB_METADATA */
+
+        bytes eth_dst_mask = 106; /* For OFPXMT_OFB_ETH_DST (exactly 6 bytes)*/
+        bytes eth_src_mask = 107; /* For OFPXMT_OFB_ETH_SRC (exactly 6 bytes)*/
+
+        uint32 vlan_vid_mask = 109; /* For OFPXMT_OFB_VLAN_VID */
+
+        uint32 ipv4_src_mask = 114; /* For OFPXMT_OFB_IPV4_SRC */
+        uint32 ipv4_dst_mask = 115; /* For OFPXMT_OFB_IPV4_DST */
+
+        uint32 arp_spa_mask = 125; /* For OFPXMT_OFB_ARP_SPA */
+        uint32 arp_tpa_mask = 126; /* For OFPXMT_OFB_ARP_TPA */
+
+        bytes ipv6_src_mask = 129; /* For OFPXMT_OFB_IPV6_SRC */
+        bytes ipv6_dst_mask = 130; /* For OFPXMT_OFB_IPV6_DST */
+
+        uint32 ipv6_flabel_mask = 131; /* For OFPXMT_OFB_IPV6_FLABEL */
+
+        uint32 pbb_isid_mask = 140; /* For OFPXMT_OFB_PBB_ISID */
+
+        uint64 tunnel_id_mask = 141; /* For OFPXMT_OFB_TUNNEL_ID */
+
+        uint32 ipv6_exthdr_mask = 142; /* For OFPXMT_OFB_IPV6_EXTHDR */
+    }
+
+}
+//#define OFPXMT_OFB_ALL    ((UINT64_C(1) << 40) - 1)
+
+
+/* The VLAN id is 12-bits, so we can use the entire 16 bits to indicate
+ * special conditions.
+ */
+enum ofp_vlan_id {
+    OFPVID_NONE    = 0x0000; /* No VLAN id was set. */
+    OFPVID_PRESENT = 0x1000; /* Bit that indicate that a VLAN id is set */
+};
+/* Define for compatibility */
+//#define OFP_VLAN_NONE      OFPVID_NONE
+
+/* Bit definitions for IPv6 Extension Header pseudo-field. */
+enum ofp_ipv6exthdr_flags {
+    OFPIEH_INVALID = 0;
+    OFPIEH_NONEXT  = 1;     /* "No next header" encountered. */
+    OFPIEH_ESP     = 2;     /* Encrypted Sec Payload header present. */
+    OFPIEH_AUTH    = 4;     /* Authentication header present. */
+    OFPIEH_DEST    = 8;     /* 1 or 2 dest headers present. */
+    OFPIEH_FRAG    = 16;    /* Fragment header present. */
+    OFPIEH_ROUTER  = 32;    /* Router header present. */
+    OFPIEH_HOP     = 64;    /* Hop-by-hop header present. */
+    OFPIEH_UNREP   = 128;   /* Unexpected repeats encountered. */
+    OFPIEH_UNSEQ   = 256;   /* Unexpected sequencing encountered. */
+};
+
+/* Header for OXM experimenter match fields.
+ * The experimenter class should not use OXM_HEADER() macros for defining
+ * fields due to this extra header. */
+message ofp_oxm_experimenter_field {
+    uint32 oxm_header = 1;    /* oxm_class = OFPXMC_EXPERIMENTER */
+    uint32 experimenter = 2;  /* Experimenter ID which takes the same
+                                 form as in struct ofp_experimenter_header. */
+};
+
+/* ## ----------------- ## */
+/* ## OpenFlow Actions. ## */
+/* ## ----------------- ## */
+
+enum ofp_action_type {
+    OFPAT_OUTPUT       = 0;  /* Output to switch port. */
+    OFPAT_COPY_TTL_OUT = 11; /* Copy TTL "outwards" -- from next-to-outermost
+                                to outermost */
+    OFPAT_COPY_TTL_IN  = 12; /* Copy TTL "inwards" -- from outermost to
+                               next-to-outermost */
+    OFPAT_SET_MPLS_TTL = 15; /* MPLS TTL */
+    OFPAT_DEC_MPLS_TTL = 16; /* Decrement MPLS TTL */
+
+    OFPAT_PUSH_VLAN    = 17; /* Push a new VLAN tag */
+    OFPAT_POP_VLAN     = 18; /* Pop the outer VLAN tag */
+    OFPAT_PUSH_MPLS    = 19; /* Push a new MPLS tag */
+    OFPAT_POP_MPLS     = 20; /* Pop the outer MPLS tag */
+    OFPAT_SET_QUEUE    = 21; /* Set queue id when outputting to a port */
+    OFPAT_GROUP        = 22; /* Apply group. */
+    OFPAT_SET_NW_TTL   = 23; /* IP TTL. */
+    OFPAT_DEC_NW_TTL   = 24; /* Decrement IP TTL. */
+    OFPAT_SET_FIELD    = 25; /* Set a header field using OXM TLV format. */
+    OFPAT_PUSH_PBB     = 26; /* Push a new PBB service tag (I-TAG) */
+    OFPAT_POP_PBB      = 27; /* Pop the outer PBB service tag (I-TAG) */
+    OFPAT_EXPERIMENTER = 0xffff;
+};
+
+/* Action header that is common to all actions.  The length includes the
+ * header and any padding used to make the action 64-bit aligned.
+ * NB: The length of an action *must* always be a multiple of eight. */
+message ofp_action {
+    ofp_action_type type = 1;       /* One of OFPAT_*. */
+    oneof action {
+        ofp_action_output output = 2;
+        ofp_action_mpls_ttl mpls_ttl = 3;
+        ofp_action_push push = 4;
+        ofp_action_pop_mpls pop_mpls = 5;
+        ofp_action_group group = 6;
+        ofp_action_nw_ttl nw_ttl = 7;
+        ofp_action_set_field set_field = 8;
+        ofp_action_experimenter experimenter = 9;
+    }
+};
+
+enum ofp_controller_max_len {
+    OFPCML_INVALID   = 0;
+    OFPCML_MAX       = 0xffe5; /* maximum max_len value which can be used
+                                  to request a specific byte length. */
+    OFPCML_NO_BUFFER = 0xffff; /* indicates that no buffering should be
+                                  applied and the whole packet is to be
+                                  sent to the controller. */
+};
+
+/* Action structure for OFPAT_OUTPUT, which sends packets out 'port'.
+ * When the 'port' is the OFPP_CONTROLLER, 'max_len' indicates the max
+ * number of bytes to send.  A 'max_len' of zero means no bytes of the
+ * packet should be sent. A 'max_len' of OFPCML_NO_BUFFER means that
+ * the packet is not buffered and the complete packet is to be sent to
+ * the controller. */
+message ofp_action_output {
+    uint32 port = 1;                 /* Output port. */
+    uint32 max_len = 2;              /* Max length to send to controller. */
+};
+
+/* Action structure for OFPAT_SET_MPLS_TTL. */
+message ofp_action_mpls_ttl {
+    uint32 mpls_ttl = 1;             /* MPLS TTL */
+};
+
+/* Action structure for OFPAT_PUSH_VLAN/MPLS/PBB. */
+message ofp_action_push {
+    uint32 ethertype = 1;            /* Ethertype */
+};
+
+/* Action structure for OFPAT_POP_MPLS. */
+message ofp_action_pop_mpls {
+    uint32 ethertype = 1;            /* Ethertype */
+};
+
+/* Action structure for OFPAT_GROUP. */
+message ofp_action_group {
+    uint32 group_id = 1;             /* Group identifier. */
+};
+
+/* Action structure for OFPAT_SET_NW_TTL. */
+message ofp_action_nw_ttl {
+    uint32 nw_ttl = 1;               /* IP TTL */
+};
+
+/* Action structure for OFPAT_SET_FIELD. */
+message ofp_action_set_field {
+    ofp_oxm_field field = 1;
+};
+
+/* Action header for OFPAT_EXPERIMENTER.
+ * The rest of the body is experimenter-defined. */
+message ofp_action_experimenter {
+    uint32 experimenter = 1;         /* Experimenter ID which takes the same
+                                        form as in struct
+                                        ofp_experimenter_header. */
+    bytes data = 2;
+};
+
+/* ## ---------------------- ## */
+/* ## OpenFlow Instructions. ## */
+/* ## ---------------------- ## */
+
+enum ofp_instruction_type {
+    OFPIT_INVALID    = 0;
+    OFPIT_GOTO_TABLE = 1;       /* Setup the next table in the lookup
+                                   pipeline */
+    OFPIT_WRITE_METADATA = 2;   /* Setup the metadata field for use later in
+                                   pipeline */
+    OFPIT_WRITE_ACTIONS = 3;    /* Write the action(s) onto the datapath action
+                                   set */
+    OFPIT_APPLY_ACTIONS = 4;    /* Applies the action(s) immediately */
+    OFPIT_CLEAR_ACTIONS = 5;    /* Clears all actions from the datapath
+                                   action set */
+    OFPIT_METER = 6;            /* Apply meter (rate limiter) */
+
+    OFPIT_EXPERIMENTER = 0xFFFF; /* Experimenter instruction */
+};
+
+/* Instruction header that is common to all instructions.  The length includes
+ * the header and any padding used to make the instruction 64-bit aligned.
+ * NB: The length of an instruction *must* always be a multiple of eight. */
+message ofp_instruction {
+    uint32 type = 1;               /* Instruction type */
+    oneof data {
+        ofp_instruction_goto_table goto_table = 2;
+        ofp_instruction_write_metadata write_metadata = 3;
+        ofp_instruction_actions actions = 4;
+        ofp_instruction_meter meter = 5;
+        ofp_instruction_experimenter experimenter = 6;
+    }
+};
+
+/* Instruction structure for OFPIT_GOTO_TABLE */
+message ofp_instruction_goto_table {
+    uint32 table_id = 1;           /* Set next table in the lookup pipeline */
+};
+
+/* Instruction structure for OFPIT_WRITE_METADATA */
+message ofp_instruction_write_metadata {
+    uint64 metadata = 1;           /* Metadata value to write */
+    uint64 metadata_mask = 2;      /* Metadata write bitmask */
+};
+
+/* Instruction structure for OFPIT_WRITE/APPLY/CLEAR_ACTIONS */
+message ofp_instruction_actions {
+    repeated ofp_action actions = 1; /* 0 or more actions associated
+                                        with OFPIT_WRITE_ACTIONS and
+                                        OFPIT_APPLY_ACTIONS */
+};
+
+/* Instruction structure for OFPIT_METER */
+message ofp_instruction_meter {
+    uint32 meter_id = 1;           /* Meter instance. */
+};
+
+/* Instruction structure for experimental instructions */
+message ofp_instruction_experimenter {
+    uint32 experimenter = 1;     /* Experimenter ID which takes the same form
+                                   as in struct ofp_experimenter_header. */
+    /* Experimenter-defined arbitrary additional data. */
+    bytes data = 2;
+};
+
+/* ## --------------------------- ## */
+/* ## OpenFlow Flow Modification. ## */
+/* ## --------------------------- ## */
+
+enum ofp_flow_mod_command {
+    OFPFC_ADD           = 0; /* New flow. */
+    OFPFC_MODIFY        = 1; /* Modify all matching flows. */
+    OFPFC_MODIFY_STRICT = 2; /* Modify entry strictly matching wildcards and
+                                priority. */
+    OFPFC_DELETE        = 3; /* Delete all matching flows. */
+    OFPFC_DELETE_STRICT = 4; /* Delete entry strictly matching wildcards and
+                                priority. */
+};
+
+/* Value used in "idle_timeout" and "hard_timeout" to indicate that the entry
+ * is permanent. */
+//#define OFP_FLOW_PERMANENT 0
+
+/* By default, choose a priority in the middle. */
+//#define OFP_DEFAULT_PRIORITY 0x8000
+
+enum ofp_flow_mod_flags {
+    OFPFF_INVALID       = 0;
+    OFPFF_SEND_FLOW_REM = 1;  /* Send flow removed message when flow
+                               * expires or is deleted. */
+    OFPFF_CHECK_OVERLAP = 2;  /* Check for overlapping entries first. */
+    OFPFF_RESET_COUNTS  = 4;  /* Reset flow packet and byte counts. */
+    OFPFF_NO_PKT_COUNTS = 8;  /* Don't keep track of packet count. */
+    OFPFF_NO_BYT_COUNTS = 16; /* Don't keep track of byte count. */
+};
+
+/* Flow setup and teardown (controller -> datapath). */
+message ofp_flow_mod {
+    //ofp_header header;
+    uint64 cookie = 1;             /* Opaque controller-issued identifier. */
+    uint64 cookie_mask = 2;        /* Mask used to restrict the cookie bits
+                                      that must match when the command is
+                                      OFPFC_MODIFY* or OFPFC_DELETE*. A value
+                                      of 0 indicates no restriction. */
+    uint32 table_id = 3;           /* ID of the table to put the flow in.
+                                      For OFPFC_DELETE_* commands, OFPTT_ALL
+                                      can also be used to delete matching
+                                      flows from all tables. */
+    ofp_flow_mod_command command = 4; /* One of OFPFC_*. */
+    uint32 idle_timeout = 5;       /* Idle time before discarding (seconds). */
+    uint32 hard_timeout = 6;       /* Max time before discarding (seconds). */
+    uint32 priority = 7;           /* Priority level of flow entry. */
+    uint32 buffer_id = 8;          /* Buffered packet to apply to, or
+                                      OFP_NO_BUFFER.
+                                      Not meaningful for OFPFC_DELETE*. */
+    uint32 out_port = 9;          /* For OFPFC_DELETE* commands, require
+                                      matching entries to include this as an
+                                      output port.  A value of OFPP_ANY
+                                      indicates no restriction. */
+    uint32 out_group = 10;         /* For OFPFC_DELETE* commands, require
+                                      matching entries to include this as an
+                                      output group.  A value of OFPG_ANY
+                                      indicates no restriction. */
+    uint32 flags = 11;             /* Bitmap of OFPFF_* flags. */
+    ofp_match match = 12;          /* Fields to match. Variable size. */
+    repeated ofp_instruction instructions = 13; /* 0 or more. */
+};
+
+/* Group numbering. Groups can use any number up to OFPG_MAX. */
+enum ofp_group {
+
+    OFPG_INVALID = 0;
+
+    /* Last usable group number. */
+    OFPG_MAX        = 0x7fffff00;
+
+    /* Fake groups. */
+    OFPG_ALL        = 0x7ffffffc;  /* Represents all groups for group delete
+                                      commands. */
+    OFPG_ANY        = 0x7fffffff;  /* Special wildcard: no group specified. */
+};
+
+/* Group commands */
+enum ofp_group_mod_command {
+    OFPGC_ADD    = 0;       /* New group. */
+    OFPGC_MODIFY = 1;       /* Modify all matching groups. */
+    OFPGC_DELETE = 2;       /* Delete all matching groups. */
+};
+
+/* Bucket for use in groups. */
+message ofp_bucket {
+    uint32 weight = 1;              /* Relative weight of bucket.  Only
+                                       defined for select groups. */
+    uint32 watch_port = 2;          /* Port whose state affects whether this
+                                       bucket is live.  Only required for fast
+                                       failover groups. */
+    uint32 watch_group = 3;         /* Group whose state affects whether this
+                                       bucket is live.  Only required for fast
+                                       failover groups. */
+    repeated ofp_action actions = 4;
+};
+
+/* Group setup and teardown (controller -> datapath). */
+message ofp_group_mod {
+    //ofp_header header;
+    ofp_group_mod_command command = 1; /* One of OFPGC_*. */
+    ofp_group_type type = 2;           /* One of OFPGT_*. */
+    uint32 group_id = 3;               /* Group identifier. */
+    repeated ofp_bucket buckets = 4;
+};
+
+/* Group types.  Values in the range [128; 255] are reserved for experimental
+ * use. */
+enum ofp_group_type {
+    OFPGT_ALL      = 0; /* All (multicast/broadcast) group.  */
+    OFPGT_SELECT   = 1; /* Select group. */
+    OFPGT_INDIRECT = 2; /* Indirect group. */
+    OFPGT_FF       = 3; /* Fast failover group. */
+};
+
+/* Special buffer-id to indicate 'no buffer' */
+//#define OFP_NO_BUFFER 0xffffffff
+
+/* Send packet (controller -> datapath). */
+message ofp_packet_out {
+    //ofp_header header;
+    uint32 buffer_id = 1;          /* ID assigned by datapath (OFP_NO_BUFFER
+                                      if none). */
+    uint32 in_port = 2;            /* Packet's input port or OFPP_CONTROLLER.*/
+    repeated ofp_action actions = 3; /* Action list - 0 or more. */
+    /* The variable size action list is optionally followed by packet data.
+     * This data is only present and meaningful if buffer_id == -1. */
+    bytes data = 4;                /* Packet data. */
+};
+
+/* Why is this packet being sent to the controller? */
+enum ofp_packet_in_reason {
+    OFPR_NO_MATCH    = 0;   /* No matching flow (table-miss flow entry). */
+    OFPR_ACTION      = 1;   /* Action explicitly output to controller. */
+    OFPR_INVALID_TTL = 2;   /* Packet has invalid TTL */
+};
+
+/* Packet received on port (datapath -> controller). */
+message ofp_packet_in {
+    //ofp_header header;
+    uint32 buffer_id = 1;     /* ID assigned by datapath. */
+    ofp_packet_in_reason reason = 2; /* Reason packet is being sent */
+    uint32 table_id = 3;      /* ID of the table that was looked up */
+    uint64 cookie = 4;        /* Cookie of the flow entry that was looked up. */
+    ofp_match match = 5;      /* Packet metadata. Variable size. */
+    bytes data = 6;           /* Ethernet frame */
+};
+
+/* Why was this flow removed? */
+enum ofp_flow_removed_reason {
+    OFPRR_IDLE_TIMEOUT = 0;     /* Flow idle time exceeded idle_timeout. */
+    OFPRR_HARD_TIMEOUT = 1;     /* Time exceeded hard_timeout. */
+    OFPRR_DELETE       = 2;     /* Evicted by a DELETE flow mod. */
+    OFPRR_GROUP_DELETE = 3;     /* Group was removed. */
+    OFPRR_METER_DELETE = 4;     /* Meter was removed */
+};
+
+/* Flow removed (datapath -> controller). */
+message ofp_flow_removed {
+    //ofp_header header;
+    uint64 cookie = 1;         /* Opaque controller-issued identifier. */
+
+    uint32 priority = 2;       /* Priority level of flow entry. */
+    ofp_flow_removed_reason reason = 3; /* One of OFPRR_*. */
+    uint32 table_id = 4;        /* ID of the table */
+
+    uint32 duration_sec = 5;   /* Time flow was alive in seconds. */
+    uint32 duration_nsec = 6;  /* Time flow was alive in nanoseconds beyond
+                                 duration_sec. */
+    uint32 idle_timeout = 7;   /* Idle timeout from original flow mod. */
+    uint32 hard_timeout = 8;   /* Hard timeout from original flow mod. */
+    uint64 packet_count = 9;
+    uint64 byte_count = 10;
+    ofp_match match = 121;  /* Description of fields. Variable size. */
+};
+
+/* Meter numbering. Flow meters can use any number up to OFPM_MAX. */
+enum ofp_meter {
+    OFPM_ZERO       = 0;
+    /* Last usable meter. */
+    OFPM_MAX        = 0x7fff0000;
+
+    /* Virtual meters. */
+    OFPM_SLOWPATH   = 0x7ffffffd;  /* Meter for slow datapath. */
+    OFPM_CONTROLLER = 0x7ffffffe;  /* Meter for controller connection. */
+    OFPM_ALL        = 0x7fffffff;  /* Represents all meters for stat requests
+                                      commands. */
+};
+
+/* Meter band types */
+enum ofp_meter_band_type {
+    OFPMBT_INVALID         = 0;
+    OFPMBT_DROP            = 1;      /* Drop packet. */
+    OFPMBT_DSCP_REMARK     = 2;      /* Remark DSCP in the IP header. */
+    OFPMBT_EXPERIMENTER    = 0xFFFF; /* Experimenter meter band. */
+};
+
+/* Common header for all meter bands */
+message ofp_meter_band_header {
+    ofp_meter_band_type type = 1;   /* One of OFPMBT_*. */
+    uint32              rate = 2;   /* Rate for this band. */
+    uint32              burst_size = 3;/* Size of bursts. */
+    oneof data {
+        ofp_meter_band_drop drop = 4;
+        ofp_meter_band_dscp_remark dscp_remark = 5;
+        ofp_meter_band_experimenter experimenter = 6;
+    }
+};
+
+/* OFPMBT_DROP band - drop packets */
+message ofp_meter_band_drop {
+    //Empty payload
+};
+
+/* OFPMBT_DSCP_REMARK band - Remark DSCP in the IP header */
+message ofp_meter_band_dscp_remark {
+    uint32        prec_level = 1; /* Number of drop precedence level to add. */
+};
+
+/* OFPMBT_EXPERIMENTER band - Experimenter type.
+ * The rest of the band is experimenter-defined. */
+message ofp_meter_band_experimenter {
+    uint32              experimenter = 1;/* Experimenter ID which takes the
+                                            same form as in struct
+                                            ofp_experimenter_header. */
+};
+
+/* Meter commands */
+enum ofp_meter_mod_command {
+    OFPMC_ADD = 0;              /* New meter. */
+    OFPMC_MODIFY = 1;           /* Modify specified meter. */
+    OFPMC_DELETE = 2;           /* Delete specified meter. */
+};
+
+/* Meter configuration flags */
+enum ofp_meter_flags {
+    OFPMF_INVALID = 0;
+    OFPMF_KBPS    = 1;     /* Rate value in kb/s (kilo-bit per second). */
+    OFPMF_PKTPS   = 2;     /* Rate value in packet/sec. */
+    OFPMF_BURST   = 4;     /* Do burst size. */
+    OFPMF_STATS   = 8;     /* Collect statistics. */
+};
+
+/* Meter configuration. OFPT_METER_MOD. */
+message ofp_meter_mod {
+    ofp_meter_mod_command command = 1;       /* One of OFPMC_*. */
+    uint32                flags = 2;         /* Bitmap of OFPMF_* flags. */
+    uint32                meter_id = 3;      /* Meter instance. */
+    repeated ofp_meter_band_header bands = 4; /* The band list length is
+                                                 inferred from the length field
+                                                 in the header. */
+};
+
+/* Values for 'type' in ofp_error_message.  These values are immutable: they
+ * will not change in future versions of the protocol (although new values may
+ * be added). */
+enum ofp_error_type {
+    OFPET_HELLO_FAILED         = 0;  /* Hello protocol failed. */
+    OFPET_BAD_REQUEST          = 1;  /* Request was not understood. */
+    OFPET_BAD_ACTION           = 2;  /* Error in action description. */
+    OFPET_BAD_INSTRUCTION      = 3;  /* Error in instruction list. */
+    OFPET_BAD_MATCH            = 4;  /* Error in match. */
+    OFPET_FLOW_MOD_FAILED      = 5;  /* Problem modifying flow entry. */
+    OFPET_GROUP_MOD_FAILED     = 6;  /* Problem modifying group entry. */
+    OFPET_PORT_MOD_FAILED      = 7;  /* Port mod request failed. */
+    OFPET_TABLE_MOD_FAILED     = 8;  /* Table mod request failed. */
+    OFPET_QUEUE_OP_FAILED      = 9;  /* Queue operation failed. */
+    OFPET_SWITCH_CONFIG_FAILED = 10; /* Switch config request failed. */
+    OFPET_ROLE_REQUEST_FAILED  = 11; /* Controller Role request failed. */
+    OFPET_METER_MOD_FAILED     = 12; /* Error in meter. */
+    OFPET_TABLE_FEATURES_FAILED = 13; /* Setting table features failed. */
+    OFPET_EXPERIMENTER = 0xffff;      /* Experimenter error messages. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_HELLO_FAILED.  'data' contains an
+ * ASCII text string that may give failure details. */
+enum ofp_hello_failed_code {
+    OFPHFC_INCOMPATIBLE = 0;    /* No compatible version. */
+    OFPHFC_EPERM        = 1;    /* Permissions error. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_BAD_REQUEST.  'data' contains at least
+ * the first 64 bytes of the failed request. */
+enum ofp_bad_request_code {
+    OFPBRC_BAD_VERSION      = 0;  /* ofp_header.version not supported. */
+    OFPBRC_BAD_TYPE         = 1;  /* ofp_header.type not supported. */
+    OFPBRC_BAD_MULTIPART    = 2;  /* ofp_multipart_request.type not supported.
+                                   */
+    OFPBRC_BAD_EXPERIMENTER = 3;  /* Experimenter id not supported
+                                   * (in ofp_experimenter_header or
+                                   * ofp_multipart_request or
+                                   * ofp_multipart_reply). */
+    OFPBRC_BAD_EXP_TYPE     = 4;  /* Experimenter type not supported. */
+    OFPBRC_EPERM            = 5;  /* Permissions error. */
+    OFPBRC_BAD_LEN          = 6;  /* Wrong request length for type. */
+    OFPBRC_BUFFER_EMPTY     = 7;  /* Specified buffer has already been used. */
+    OFPBRC_BUFFER_UNKNOWN   = 8;  /* Specified buffer does not exist. */
+    OFPBRC_BAD_TABLE_ID     = 9;  /* Specified table-id invalid or does not
+                                   * exist. */
+    OFPBRC_IS_SLAVE         = 10; /* Denied because controller is slave. */
+    OFPBRC_BAD_PORT         = 11; /* Invalid port. */
+    OFPBRC_BAD_PACKET       = 12; /* Invalid packet in packet-out. */
+    OFPBRC_MULTIPART_BUFFER_OVERFLOW    = 13; /* ofp_multipart_request
+                                     overflowed the assigned buffer. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_BAD_ACTION.  'data' contains at least
+ * the first 64 bytes of the failed request. */
+enum ofp_bad_action_code {
+    OFPBAC_BAD_TYPE           = 0;  /* Unknown or unsupported action type. */
+    OFPBAC_BAD_LEN            = 1;  /* Length problem in actions. */
+    OFPBAC_BAD_EXPERIMENTER   = 2;  /* Unknown experimenter id specified. */
+    OFPBAC_BAD_EXP_TYPE       = 3;  /* Unknown action for experimenter id. */
+    OFPBAC_BAD_OUT_PORT       = 4;  /* Problem validating output port. */
+    OFPBAC_BAD_ARGUMENT       = 5;  /* Bad action argument. */
+    OFPBAC_EPERM              = 6;  /* Permissions error. */
+    OFPBAC_TOO_MANY           = 7;  /* Can't handle this many actions. */
+    OFPBAC_BAD_QUEUE          = 8;  /* Problem validating output queue. */
+    OFPBAC_BAD_OUT_GROUP      = 9;  /* Invalid group id in forward action. */
+    OFPBAC_MATCH_INCONSISTENT = 10; /* Action can't apply for this match,
+                                       or Set-Field missing prerequisite. */
+    OFPBAC_UNSUPPORTED_ORDER  = 11; /* Action order is unsupported for the
+                                 action list in an Apply-Actions instruction */
+    OFPBAC_BAD_TAG            = 12; /* Actions uses an unsupported
+                                       tag/encap. */
+    OFPBAC_BAD_SET_TYPE       = 13; /* Unsupported type in SET_FIELD action. */
+    OFPBAC_BAD_SET_LEN        = 14; /* Length problem in SET_FIELD action. */
+    OFPBAC_BAD_SET_ARGUMENT   = 15; /* Bad argument in SET_FIELD action. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_BAD_INSTRUCTION.  'data' contains at
+ * least the first 64 bytes of the failed request. */
+enum ofp_bad_instruction_code {
+    OFPBIC_UNKNOWN_INST     = 0; /* Unknown instruction. */
+    OFPBIC_UNSUP_INST       = 1; /* Switch or table does not support the
+                                    instruction. */
+    OFPBIC_BAD_TABLE_ID     = 2; /* Invalid Table-ID specified. */
+    OFPBIC_UNSUP_METADATA   = 3; /* Metadata value unsupported by datapath. */
+    OFPBIC_UNSUP_METADATA_MASK = 4; /* Metadata mask value unsupported by
+                                       datapath. */
+    OFPBIC_BAD_EXPERIMENTER = 5; /* Unknown experimenter id specified. */
+    OFPBIC_BAD_EXP_TYPE     = 6; /* Unknown instruction for experimenter id. */
+    OFPBIC_BAD_LEN          = 7; /* Length problem in instructions. */
+    OFPBIC_EPERM            = 8; /* Permissions error. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_BAD_MATCH.  'data' contains at least
+ * the first 64 bytes of the failed request. */
+enum ofp_bad_match_code {
+    OFPBMC_BAD_TYPE         = 0;  /* Unsupported match type specified by the
+                                     match */
+    OFPBMC_BAD_LEN          = 1;  /* Length problem in match. */
+    OFPBMC_BAD_TAG          = 2;  /* Match uses an unsupported tag/encap. */
+    OFPBMC_BAD_DL_ADDR_MASK = 3;  /* Unsupported datalink addr mask - switch
+                                     does not support arbitrary datalink
+                                     address mask. */
+    OFPBMC_BAD_NW_ADDR_MASK = 4;  /* Unsupported network addr mask - switch
+                                     does not support arbitrary network
+                                     address mask. */
+    OFPBMC_BAD_WILDCARDS    = 5;  /* Unsupported combination of fields masked
+                                     or omitted in the match. */
+    OFPBMC_BAD_FIELD        = 6;  /* Unsupported field type in the match. */
+    OFPBMC_BAD_VALUE        = 7;  /* Unsupported value in a match field. */
+    OFPBMC_BAD_MASK         = 8;  /* Unsupported mask specified in the match,
+                                     field is not dl-address or nw-address. */
+    OFPBMC_BAD_PREREQ       = 9;  /* A prerequisite was not met. */
+    OFPBMC_DUP_FIELD        = 10; /* A field type was duplicated. */
+    OFPBMC_EPERM            = 11; /* Permissions error. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_FLOW_MOD_FAILED.  'data' contains
+ * at least the first 64 bytes of the failed request. */
+enum ofp_flow_mod_failed_code {
+    OFPFMFC_UNKNOWN      = 0;   /* Unspecified error. */
+    OFPFMFC_TABLE_FULL   = 1;   /* Flow not added because table was full. */
+    OFPFMFC_BAD_TABLE_ID = 2;   /* Table does not exist */
+    OFPFMFC_OVERLAP      = 3;   /* Attempted to add overlapping flow with
+                                   CHECK_OVERLAP flag set. */
+    OFPFMFC_EPERM        = 4;   /* Permissions error. */
+    OFPFMFC_BAD_TIMEOUT  = 5;   /* Flow not added because of unsupported
+                                   idle/hard timeout. */
+    OFPFMFC_BAD_COMMAND  = 6;   /* Unsupported or unknown command. */
+    OFPFMFC_BAD_FLAGS    = 7;   /* Unsupported or unknown flags. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_GROUP_MOD_FAILED.  'data' contains
+ * at least the first 64 bytes of the failed request. */
+enum ofp_group_mod_failed_code {
+    OFPGMFC_GROUP_EXISTS         = 0;  /* Group not added because a group ADD
+                                          attempted to replace an
+                                          already-present group. */
+    OFPGMFC_INVALID_GROUP        = 1;  /* Group not added because Group
+                                          specified is invalid. */
+    OFPGMFC_WEIGHT_UNSUPPORTED   = 2;  /* Switch does not support unequal load
+                                          sharing with select groups. */
+    OFPGMFC_OUT_OF_GROUPS        = 3;  /* The group table is full. */
+    OFPGMFC_OUT_OF_BUCKETS       = 4;  /* The maximum number of action buckets
+                                          for a group has been exceeded. */
+    OFPGMFC_CHAINING_UNSUPPORTED = 5;  /* Switch does not support groups that
+                                          forward to groups. */
+    OFPGMFC_WATCH_UNSUPPORTED    = 6;  /* This group cannot watch the
+                                          watch_port or watch_group specified.
+                                        */
+    OFPGMFC_LOOP                 = 7;  /* Group entry would cause a loop. */
+    OFPGMFC_UNKNOWN_GROUP        = 8;  /* Group not modified because a group
+                                          MODIFY attempted to modify a
+                                          non-existent group. */
+    OFPGMFC_CHAINED_GROUP        = 9;  /* Group not deleted because another
+                                          group is forwarding to it. */
+    OFPGMFC_BAD_TYPE             = 10; /* Unsupported or unknown group type. */
+    OFPGMFC_BAD_COMMAND          = 11; /* Unsupported or unknown command. */
+    OFPGMFC_BAD_BUCKET           = 12; /* Error in bucket. */
+    OFPGMFC_BAD_WATCH            = 13; /* Error in watch port/group. */
+    OFPGMFC_EPERM                = 14; /* Permissions error. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_PORT_MOD_FAILED.  'data' contains
+ * at least the first 64 bytes of the failed request. */
+enum ofp_port_mod_failed_code {
+    OFPPMFC_BAD_PORT      = 0;   /* Specified port number does not exist. */
+    OFPPMFC_BAD_HW_ADDR   = 1;   /* Specified hardware address does not
+                                  * match the port number. */
+    OFPPMFC_BAD_CONFIG    = 2;   /* Specified config is invalid. */
+    OFPPMFC_BAD_ADVERTISE = 3;   /* Specified advertise is invalid. */
+    OFPPMFC_EPERM         = 4;   /* Permissions error. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_TABLE_MOD_FAILED.  'data' contains
+ * at least the first 64 bytes of the failed request. */
+enum ofp_table_mod_failed_code {
+    OFPTMFC_BAD_TABLE  = 0;      /* Specified table does not exist. */
+    OFPTMFC_BAD_CONFIG = 1;      /* Specified config is invalid. */
+    OFPTMFC_EPERM      = 2;      /* Permissions error. */
+};
+
+/* ofp_error msg 'code' values for OFPET_QUEUE_OP_FAILED. 'data' contains
+ * at least the first 64 bytes of the failed request */
+enum ofp_queue_op_failed_code {
+    OFPQOFC_BAD_PORT   = 0;     /* Invalid port (or port does not exist). */
+    OFPQOFC_BAD_QUEUE  = 1;     /* Queue does not exist. */
+    OFPQOFC_EPERM      = 2;     /* Permissions error. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_SWITCH_CONFIG_FAILED. 'data' contains
+ * at least the first 64 bytes of the failed request. */
+enum ofp_switch_config_failed_code {
+    OFPSCFC_BAD_FLAGS  = 0;      /* Specified flags is invalid. */
+    OFPSCFC_BAD_LEN    = 1;      /* Specified len is invalid. */
+    OFPSCFC_EPERM      = 2;      /* Permissions error. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_ROLE_REQUEST_FAILED. 'data' contains
+ * at least the first 64 bytes of the failed request. */
+enum ofp_role_request_failed_code {
+    OFPRRFC_STALE      = 0;      /* Stale Message: old generation_id. */
+    OFPRRFC_UNSUP      = 1;      /* Controller role change unsupported. */
+    OFPRRFC_BAD_ROLE   = 2;      /* Invalid role. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_METER_MOD_FAILED.  'data' contains
+ * at least the first 64 bytes of the failed request. */
+enum ofp_meter_mod_failed_code {
+    OFPMMFC_UNKNOWN       = 0;  /* Unspecified error. */
+    OFPMMFC_METER_EXISTS  = 1;  /* Meter not added because a Meter ADD
+                                 * attempted to replace an existing Meter. */
+    OFPMMFC_INVALID_METER = 2;  /* Meter not added because Meter specified
+                                 * is invalid,
+                                 * or invalid meter in meter action. */
+    OFPMMFC_UNKNOWN_METER = 3;  /* Meter not modified because a Meter MODIFY
+                                 * attempted to modify a non-existent Meter,
+                                 * or bad meter in meter action. */
+    OFPMMFC_BAD_COMMAND   = 4;  /* Unsupported or unknown command. */
+    OFPMMFC_BAD_FLAGS     = 5;  /* Flag configuration unsupported. */
+    OFPMMFC_BAD_RATE      = 6;  /* Rate unsupported. */
+    OFPMMFC_BAD_BURST     = 7;  /* Burst size unsupported. */
+    OFPMMFC_BAD_BAND      = 8;  /* Band unsupported. */
+    OFPMMFC_BAD_BAND_VALUE = 9; /* Band value unsupported. */
+    OFPMMFC_OUT_OF_METERS = 10; /* No more meters available. */
+    OFPMMFC_OUT_OF_BANDS  = 11; /* The maximum number of properties
+                                 * for a meter has been exceeded. */
+};
+
+/* ofp_error_msg 'code' values for OFPET_TABLE_FEATURES_FAILED. 'data' contains
+ * at least the first 64 bytes of the failed request. */
+enum ofp_table_features_failed_code {
+    OFPTFFC_BAD_TABLE    = 0;      /* Specified table does not exist. */
+    OFPTFFC_BAD_METADATA = 1;      /* Invalid metadata mask. */
+    OFPTFFC_BAD_TYPE     = 2;      /* Unknown property type. */
+    OFPTFFC_BAD_LEN      = 3;      /* Length problem in properties. */
+    OFPTFFC_BAD_ARGUMENT = 4;      /* Unsupported property value. */
+    OFPTFFC_EPERM        = 5;      /* Permissions error. */
+};
+
+/* OFPT_ERROR: Error message (datapath -> controller). */
+message ofp_error_msg {
+    //ofp_header header;
+    uint32 type = 1;
+    uint32 code = 2;
+    bytes data = 3;          /* Variable-length data.  Interpreted based
+                                 on the type and code.  No padding. */
+};
+
+/* OFPET_EXPERIMENTER: Error message (datapath -> controller). */
+message ofp_error_experimenter_msg {
+    //ofp_header header;
+
+    uint32 type = 1;           /* OFPET_EXPERIMENTER. */
+    uint32 exp_type = 2;       /* Experimenter defined. */
+    uint32 experimenter = 3;   /* Experimenter ID which takes the same form
+                                    as in struct ofp_experimenter_header. */
+    bytes data = 4;              /* Variable-length data.  Interpreted based
+                                    on the type and code.  No padding. */
+};
+
+enum ofp_multipart_type {
+    /* Description of this OpenFlow switch.
+     * The request body is empty.
+     * The reply body is struct ofp_desc. */
+    OFPMP_DESC = 0;
+
+    /* Individual flow statistics.
+     * The request body is struct ofp_flow_stats_request.
+     * The reply body is an array of struct ofp_flow_stats. */
+    OFPMP_FLOW = 1;
+
+    /* Aggregate flow statistics.
+     * The request body is struct ofp_aggregate_stats_request.
+     * The reply body is struct ofp_aggregate_stats_reply. */
+    OFPMP_AGGREGATE = 2;
+
+    /* Flow table statistics.
+     * The request body is empty.
+     * The reply body is an array of struct ofp_table_stats. */
+    OFPMP_TABLE = 3;
+
+    /* Port statistics.
+     * The request body is struct ofp_port_stats_request.
+     * The reply body is an array of struct ofp_port_stats. */
+    OFPMP_PORT_STATS = 4;
+
+    /* Queue statistics for a port
+     * The request body is struct ofp_queue_stats_request.
+     * The reply body is an array of struct ofp_queue_stats */
+    OFPMP_QUEUE = 5;
+
+    /* Group counter statistics.
+     * The request body is struct ofp_group_stats_request.
+     * The reply is an array of struct ofp_group_stats. */
+    OFPMP_GROUP = 6;
+
+    /* Group description.
+     * The request body is empty.
+     * The reply body is an array of struct ofp_group_desc. */
+    OFPMP_GROUP_DESC = 7;
+
+    /* Group features.
+     * The request body is empty.
+     * The reply body is struct ofp_group_features. */
+    OFPMP_GROUP_FEATURES = 8;
+
+    /* Meter statistics.
+     * The request body is struct ofp_meter_multipart_requests.
+     * The reply body is an array of struct ofp_meter_stats. */
+    OFPMP_METER = 9;
+
+    /* Meter configuration.
+     * The request body is struct ofp_meter_multipart_requests.
+     * The reply body is an array of struct ofp_meter_config. */
+    OFPMP_METER_CONFIG = 10;
+
+    /* Meter features.
+     * The request body is empty.
+     * The reply body is struct ofp_meter_features. */
+    OFPMP_METER_FEATURES = 11;
+
+    /* Table features.
+     * The request body is either empty or contains an array of
+     * struct ofp_table_features containing the controller's
+     * desired view of the switch. If the switch is unable to
+     * set the specified view an error is returned.
+     * The reply body is an array of struct ofp_table_features. */
+    OFPMP_TABLE_FEATURES = 12;
+
+    /* Port description.
+     * The request body is empty.
+     * The reply body is an array of struct ofp_port. */
+    OFPMP_PORT_DESC = 13;
+
+    /* Experimenter extension.
+     * The request and reply bodies begin with
+     * struct ofp_experimenter_multipart_header.
+     * The request and reply bodies are otherwise experimenter-defined. */
+    OFPMP_EXPERIMENTER = 0xffff;
+};
+
+/* Backward compatibility with 1.3.1 - avoid breaking the API. */
+//#define ofp_multipart_types ofp_multipart_type
+
+enum ofp_multipart_request_flags {
+    OFPMPF_REQ_INVALID = 0;
+    OFPMPF_REQ_MORE  = 1;  /* More requests to follow. */
+};
+
+message ofp_multipart_request {
+    //ofp_header header;
+    ofp_multipart_type type = 1; /* One of the OFPMP_* constants. */
+    uint32 flags = 2;            /* OFPMPF_REQ_* flags. */
+    bytes body = 3;              /* Body of the request. 0 or more bytes. */
+};
+
+enum ofp_multipart_reply_flags {
+    OFPMPF_REPLY_INVALID = 0;
+    OFPMPF_REPLY_MORE  = 1;  /* More replies to follow. */
+};
+
+message ofp_multipart_reply {
+    //ofp_header header;
+    ofp_multipart_type type = 1; /* One of the OFPMP_* constants. */
+    uint32 flags = 2;            /* OFPMPF_REPLY_* flags. */
+    bytes body = 3;              /* Body of the reply. 0 or more bytes. */
+};
+
+//#define DESC_STR_LEN   256
+//#define SERIAL_NUM_LEN 32
+/* Body of reply to OFPMP_DESC request.  Each entry is a NULL-terminated
+ * ASCII string. */
+message ofp_desc {
+    string mfr_desc = 1;       /* Manufacturer description. */
+    string hw_desc = 2;        /* Hardware description. */
+    string sw_desc = 3;        /* Software description. */
+    string serial_num = 4;     /* Serial number. */
+    string dp_desc = 5;        /* Human readable description of datapath. */
+};
+
+/* Body for ofp_multipart_request of type OFPMP_FLOW. */
+message ofp_flow_stats_request {
+    uint32 table_id = 1;       /* ID of table to read (from ofp_table_stats),
+                                    OFPTT_ALL for all tables. */
+    uint32 out_port = 2;       /* Require matching entries to include this
+                                    as an output port.  A value of OFPP_ANY
+                                    indicates no restriction. */
+    uint32 out_group = 3;      /* Require matching entries to include this
+                                    as an output group.  A value of OFPG_ANY
+                                    indicates no restriction. */
+    uint64 cookie = 4;         /* Require matching entries to contain this
+                                    cookie value */
+    uint64 cookie_mask = 5;    /* Mask used to restrict the cookie bits that
+                                    must match. A value of 0 indicates
+                                    no restriction. */
+    ofp_match match = 6;         /* Fields to match. Variable size. */
+};
+
+/* Body of reply to OFPMP_FLOW request. */
+message ofp_flow_stats {
+    uint64 id = 14;            /* Unique ID of flow within device. */
+    uint32 table_id = 1;       /* ID of table flow came from. */
+    uint32 duration_sec = 2;   /* Time flow has been alive in seconds. */
+    uint32 duration_nsec = 3;  /* Time flow has been alive in nanoseconds
+                                  beyond duration_sec. */
+    uint32 priority = 4;       /* Priority of the entry. */
+    uint32 idle_timeout = 5;   /* Number of seconds idle before expiration. */
+    uint32 hard_timeout = 6;   /* Number of seconds before expiration. */
+    uint32 flags = 7;          /* Bitmap of OFPFF_* flags. */
+    uint64 cookie = 8;         /* Opaque controller-issued identifier. */
+    uint64 packet_count = 9;   /* Number of packets in flow. */
+    uint64 byte_count = 10;    /* Number of bytes in flow. */
+    ofp_match match = 12;      /* Description of fields. Variable size. */
+    repeated ofp_instruction instructions = 13; /* Instruction set
+                                                   (0 or more) */
+};
+
+/* Body for ofp_multipart_request of type OFPMP_AGGREGATE. */
+message ofp_aggregate_stats_request {
+    uint32 table_id = 1;      /* ID of table to read (from ofp_table_stats)
+                                 OFPTT_ALL for all tables. */
+    uint32 out_port = 2;      /* Require matching entries to include this
+                                 as an output port.  A value of OFPP_ANY
+                                 indicates no restriction. */
+    uint32 out_group = 3;     /* Require matching entries to include this
+                                 as an output group.  A value of OFPG_ANY
+                                 indicates no restriction. */
+    uint64 cookie = 4;        /* Require matching entries to contain this
+                                 cookie value */
+    uint64 cookie_mask = 5;   /* Mask used to restrict the cookie bits that
+                                 must match. A value of 0 indicates
+                                 no restriction. */
+    ofp_match match = 6;      /* Fields to match. Variable size. */
+};
+
+/* Body of reply to OFPMP_AGGREGATE request. */
+message ofp_aggregate_stats_reply {
+    uint64 packet_count = 1;   /* Number of packets in flows. */
+    uint64 byte_count = 2;     /* Number of bytes in flows. */
+    uint32 flow_count = 3;     /* Number of flows. */
+};
+
+/* Table Feature property types.
+ * Low order bit cleared indicates a property for a regular Flow Entry.
+ * Low order bit set indicates a property for the Table-Miss Flow Entry.
+ */
+enum ofp_table_feature_prop_type {
+    OFPTFPT_INSTRUCTIONS           = 0;  /* Instructions property. */
+    OFPTFPT_INSTRUCTIONS_MISS      = 1;  /* Instructions for table-miss. */
+    OFPTFPT_NEXT_TABLES            = 2;  /* Next Table property. */
+    OFPTFPT_NEXT_TABLES_MISS       = 3;  /* Next Table for table-miss. */
+    OFPTFPT_WRITE_ACTIONS          = 4;  /* Write Actions property. */
+    OFPTFPT_WRITE_ACTIONS_MISS     = 5;  /* Write Actions for table-miss. */
+    OFPTFPT_APPLY_ACTIONS          = 6;  /* Apply Actions property. */
+    OFPTFPT_APPLY_ACTIONS_MISS     = 7;  /* Apply Actions for table-miss. */
+    OFPTFPT_MATCH                  = 8;  /* Match property. */
+    OFPTFPT_WILDCARDS              = 10; /* Wildcards property. */
+    OFPTFPT_WRITE_SETFIELD         = 12; /* Write Set-Field property. */
+    OFPTFPT_WRITE_SETFIELD_MISS    = 13; /* Write Set-Field for table-miss. */
+    OFPTFPT_APPLY_SETFIELD         = 14; /* Apply Set-Field property. */
+    OFPTFPT_APPLY_SETFIELD_MISS    = 15; /* Apply Set-Field for table-miss. */
+    OFPTFPT_EXPERIMENTER           = 0xFFFE; /* Experimenter property. */
+    OFPTFPT_EXPERIMENTER_MISS      = 0xFFFF; /* Experimenter for table-miss. */
+};
+
+/* Common header for all Table Feature Properties */
+message ofp_table_feature_property {
+    ofp_table_feature_prop_type type = 1;   /* One of OFPTFPT_*. */
+    oneof value {
+        ofp_table_feature_prop_instructions instructions = 2;
+        ofp_table_feature_prop_next_tables next_tables = 3;
+        ofp_table_feature_prop_actions actions = 4;
+        ofp_table_feature_prop_oxm oxm = 5;
+        ofp_table_feature_prop_experimenter experimenter = 6;
+    }
+};
+
+/* Instructions property */
+message ofp_table_feature_prop_instructions {
+    /* One of OFPTFPT_INSTRUCTIONS,
+       OFPTFPT_INSTRUCTIONS_MISS. */
+    repeated ofp_instruction instructions = 1;   /* List of instructions */
+};
+
+/* Next Tables property */
+message ofp_table_feature_prop_next_tables {
+    /* One of OFPTFPT_NEXT_TABLES,
+       OFPTFPT_NEXT_TABLES_MISS. */
+    repeated uint32 next_table_ids = 1;     /* List of table ids. */
+};
+
+/* Actions property */
+message ofp_table_feature_prop_actions {
+    /* One of OFPTFPT_WRITE_ACTIONS,
+       OFPTFPT_WRITE_ACTIONS_MISS,
+       OFPTFPT_APPLY_ACTIONS,
+       OFPTFPT_APPLY_ACTIONS_MISS. */
+    repeated ofp_action actions = 1; /* List of actions */
+};
+
+/* Match, Wildcard or Set-Field property */
+message ofp_table_feature_prop_oxm {
+    /* One of OFPTFPT_MATCH,
+       OFPTFPT_WILDCARDS,
+       OFPTFPT_WRITE_SETFIELD,
+       OFPTFPT_WRITE_SETFIELD_MISS,
+       OFPTFPT_APPLY_SETFIELD,
+       OFPTFPT_APPLY_SETFIELD_MISS. */
+    /* TODO is this a uint32??? */
+    repeated uint32 oxm_ids = 3;    /* Array of OXM headers */
+};
+
+/* Experimenter table feature property */
+message ofp_table_feature_prop_experimenter {
+    /* One of OFPTFPT_EXPERIMENTER,
+       OFPTFPT_EXPERIMENTER_MISS. */
+    uint32         experimenter = 2; /* Experimenter ID which takes the same
+                                        form as in struct
+                                        ofp_experimenter_header. */
+    uint32         exp_type = 3;      /* Experimenter defined. */
+    repeated uint32 experimenter_data = 4;
+};
+
+/* Body for ofp_multipart_request of type OFPMP_TABLE_FEATURES./
+ * Body of reply to OFPMP_TABLE_FEATURES request. */
+message ofp_table_features {
+    uint32 table_id = 1;       /* Identifier of table.  Lower numbered tables
+                                are consulted first. */
+    string name = 2;
+    uint64 metadata_match = 3; /* Bits of metadata table can match. */
+    uint64 metadata_write = 4; /* Bits of metadata table can write. */
+    uint32 config = 5;         /* Bitmap of OFPTC_* values */
+    uint32 max_entries = 6;    /* Max number of entries supported. */
+
+    /* Table Feature Property list */
+    repeated ofp_table_feature_property properties = 7;
+};
+
+/* Body of reply to OFPMP_TABLE request. */
+message ofp_table_stats {
+    uint32 table_id = 1;      /* Identifier of table.  Lower numbered tables
+                                 are consulted first. */
+    uint32 active_count = 2;  /* Number of active entries. */
+    uint64 lookup_count = 3;  /* Number of packets looked up in table. */
+    uint64 matched_count = 4; /* Number of packets that hit table. */
+};
+
+/* Body for ofp_multipart_request of type OFPMP_PORT. */
+message ofp_port_stats_request {
+    uint32 port_no = 1;       /* OFPMP_PORT message must request statistics
+                               * either for a single port (specified in
+                               * port_no) or for all ports (if port_no ==
+                               * OFPP_ANY). */
+};
+
+/* Body of reply to OFPMP_PORT request. If a counter is unsupported, set
+ * the field to all ones. */
+message ofp_port_stats {
+    uint32 port_no = 1;
+    uint64 rx_packets = 2;   /* Number of received packets. */
+    uint64 tx_packets = 3;   /* Number of transmitted packets. */
+    uint64 rx_bytes = 4;     /* Number of received bytes. */
+    uint64 tx_bytes = 5;     /* Number of transmitted bytes. */
+    uint64 rx_dropped = 6;   /* Number of packets dropped by RX. */
+    uint64 tx_dropped = 7;   /* Number of packets dropped by TX. */
+    uint64 rx_errors = 8;    /* Number of receive errors.  This is a super-set
+                                of more specific receive errors and should be
+                                greater than or equal to the sum of all
+                                rx_*_err values. */
+    uint64 tx_errors = 9;    /* Number of transmit errors.  This is a super-set
+                                of more specific transmit errors and should be
+                                greater than or equal to the sum of all
+                                tx_*_err values (none currently defined.) */
+    uint64 rx_frame_err = 10;  /* Number of frame alignment errors. */
+    uint64 rx_over_err = 11;   /* Number of packets with RX overrun. */
+    uint64 rx_crc_err = 12;    /* Number of CRC errors. */
+    uint64 collisions = 13;    /* Number of collisions. */
+    uint32 duration_sec = 14;  /* Time port has been alive in seconds. */
+    uint32 duration_nsec = 15; /* Time port has been alive in nanoseconds
+                                  beyond duration_sec. */
+};
+
+/* Body of OFPMP_GROUP request. */
+message ofp_group_stats_request {
+    uint32 group_id = 1;      /* All groups if OFPG_ALL. */
+};
+
+/* Used in group stats replies. */
+message ofp_bucket_counter {
+    uint64 packet_count = 1;  /* Number of packets processed by bucket. */
+    uint64 byte_count = 2;    /* Number of bytes processed by bucket. */
+};
+
+/* Body of reply to OFPMP_GROUP request. */
+message ofp_group_stats {
+    uint32 group_id = 1;      /* Group identifier. */
+    uint32 ref_count = 2;     /* Number of flows or groups that directly
+                                 forward to this group. */
+    uint64 packet_count = 3;  /* Number of packets processed by group. */
+    uint64 byte_count = 4;    /* Number of bytes processed by group. */
+    uint32 duration_sec = 5;  /* Time group has been alive in seconds. */
+    uint32 duration_nsec = 6; /* Time group has been alive in nanoseconds
+                                 beyond duration_sec. */
+    repeated ofp_bucket_counter bucket_stats = 7; /* One counter set per
+                                                     bucket. */
+};
+
+/* Body of reply to OFPMP_GROUP_DESC request. */
+message ofp_group_desc {
+    ofp_group_type type = 1;       /* One of OFPGT_*. */
+    uint32 group_id = 2;           /* Group identifier. */
+    repeated ofp_bucket buckets = 3;   /* List of buckets - 0 or more. */
+};
+
+message ofp_group_entry {
+    ofp_group_desc desc = 1 [(voltha.yang_inline_node).id = 'desc',
+                            (voltha.yang_inline_node).type = 'openflow_13-ofp_group_desc'];
+    ofp_group_stats stats = 2;
+};
+
+/* Backward compatibility with 1.3.1 - avoid breaking the API. */
+//#define ofp_group_desc_stats ofp_group_desc
+
+/* Group configuration flags */
+enum ofp_group_capabilities {
+    OFPGFC_INVALID         = 0;
+    OFPGFC_SELECT_WEIGHT   = 1;  /* Support weight for select groups */
+    OFPGFC_SELECT_LIVENESS = 2;  /* Support liveness for select groups */
+    OFPGFC_CHAINING        = 4;  /* Support chaining groups */
+    OFPGFC_CHAINING_CHECKS = 8;  /* Check chaining for loops and delete */
+};
+
+/* Body of reply to OFPMP_GROUP_FEATURES request. Group features. */
+message ofp_group_features {
+    uint32  types = 1;         /* Bitmap of (1 << OFPGT_*) values supported. */
+    uint32  capabilities = 2;  /* Bitmap of OFPGFC_* capability supported. */
+    repeated uint32 max_groups = 3; /* Maximum number of groups for each type.
+                                     */
+    repeated uint32 actions = 4;    /* Bitmaps of (1 << OFPAT_*) values
+                                       supported. */
+};
+
+/* Body of OFPMP_METER and OFPMP_METER_CONFIG requests. */
+message ofp_meter_multipart_request {
+    uint32 meter_id = 1;      /* Meter instance, or OFPM_ALL. */
+};
+
+/* Statistics for each meter band */
+message ofp_meter_band_stats {
+    uint64        packet_band_count = 1;  /* Number of packets in band. */
+    uint64        byte_band_count = 2;    /* Number of bytes in band. */
+};
+
+/* Body of reply to OFPMP_METER request. Meter statistics. */
+message ofp_meter_stats {
+    uint32        meter_id = 1;        /* Meter instance. */
+    uint32        flow_count = 2;      /* Number of flows bound to meter. */
+    uint64        packet_in_count = 3; /* Number of packets in input. */
+    uint64        byte_in_count = 4;   /* Number of bytes in input. */
+    uint32        duration_sec = 5; /* Time meter has been alive in seconds. */
+    uint32        duration_nsec = 6;/* Time meter has been alive in nanoseconds
+                                       beyond duration_sec. */
+    repeated ofp_meter_band_stats band_stats = 7; /* The band_stats length is
+                                         inferred from the length field. */
+};
+
+/* Body of reply to OFPMP_METER_CONFIG request. Meter configuration. */
+message ofp_meter_config {
+    uint32        flags = 1;           /* All OFPMF_* that apply. */
+    uint32        meter_id = 2;        /* Meter instance. */
+    repeated ofp_meter_band_header bands = 3; /* The bands length is
+                                             inferred from the length field. */
+};
+
+/* Body of reply to OFPMP_METER_FEATURES request. Meter features. */
+message ofp_meter_features {
+    uint32    max_meter = 1;    /* Maximum number of meters. */
+    uint32    band_types = 2;   /* Bitmaps of (1 << OFPMBT_*) values supported.
+                                 */
+    uint32    capabilities = 3; /* Bitmaps of "ofp_meter_flags". */
+    uint32    max_bands = 4;    /* Maximum bands per meters */
+    uint32    max_color = 5;    /* Maximum color value */
+};
+
+/* Body for ofp_multipart_request/reply of type OFPMP_EXPERIMENTER. */
+message ofp_experimenter_multipart_header {
+    uint32 experimenter = 1;   /* Experimenter ID which takes the same form
+                                  as in struct ofp_experimenter_header. */
+    uint32 exp_type = 2;       /* Experimenter defined. */
+    bytes data = 3; /* Experimenter-defined arbitrary additional data. */
+};
+
+/* Experimenter extension. */
+message ofp_experimenter_header {
+    //ofp_header header;  /* Type OFPT_EXPERIMENTER. */
+    uint32 experimenter = 1;     /* Experimenter ID:
+                                 * - MSB 0: low-order bytes are IEEE OUI.
+                                 * - MSB != 0: defined by ONF. */
+    uint32 exp_type = 2;         /* Experimenter defined. */
+    bytes data = 3; /* Experimenter-defined arbitrary additional data. */
+};
+
+/* All ones is used to indicate all queues in a port (for stats retrieval). */
+//#define OFPQ_ALL      0xffffffff
+
+/* Min rate > 1000 means not configured. */
+//#define OFPQ_MIN_RATE_UNCFG      0xffff
+
+/* Max rate > 1000 means not configured. */
+//#define OFPQ_MAX_RATE_UNCFG      0xffff
+
+enum ofp_queue_properties {
+    OFPQT_INVALID       = 0;
+    OFPQT_MIN_RATE      = 1;      /* Minimum datarate guaranteed. */
+    OFPQT_MAX_RATE      = 2;      /* Maximum datarate. */
+    OFPQT_EXPERIMENTER  = 0xffff; /* Experimenter defined property. */
+};
+
+/* Common description for a queue. */
+message ofp_queue_prop_header {
+    uint32 property = 1;   /* One of OFPQT_. */
+    uint32 len = 2;        /* Length of property, including this header. */
+};
+
+/* Min-Rate queue property description. */
+message ofp_queue_prop_min_rate {
+    ofp_queue_prop_header prop_header = 1;/* prop: OFPQT_MIN, len: 16. */
+    uint32 rate = 2;       /* In 1/10 of a percent = 0;>1000 -> disabled. */
+};
+
+/* Max-Rate queue property description. */
+message ofp_queue_prop_max_rate {
+    ofp_queue_prop_header prop_header = 1;/* prop: OFPQT_MAX, len: 16. */
+    uint32 rate = 2;       /* In 1/10 of a percent = 0;>1000 -> disabled. */
+};
+
+/* Experimenter queue property description. */
+message ofp_queue_prop_experimenter {
+    ofp_queue_prop_header prop_header = 1;/* prop: OFPQT_EXPERIMENTER */
+    uint32 experimenter = 2;         /* Experimenter ID which takes the same
+                                          form as in struct
+                                          ofp_experimenter_header. */
+    bytes data = 3;                    /* Experimenter defined data. */
+};
+
+/* Full description for a queue. */
+message ofp_packet_queue {
+    uint32 queue_id = 1;    /* id for the specific queue. */
+    uint32 port = 2;        /* Port this queue is attached to. */
+    repeated ofp_queue_prop_header properties = 4; /* List of properties. */
+};
+
+/* Query for port queue configuration. */
+message ofp_queue_get_config_request {
+    //ofp_header header;
+    uint32 port = 1;        /* Port to be queried. Should refer
+                              to a valid physical port (i.e. <= OFPP_MAX),
+                              or OFPP_ANY to request all configured
+                              queues.*/
+};
+
+/* Queue configuration for a given port. */
+message ofp_queue_get_config_reply {
+    //ofp_header header;
+    uint32 port = 1;
+    repeated ofp_packet_queue queues = 2; /* List of configured queues. */
+};
+
+/* OFPAT_SET_QUEUE action struct: send packets to given queue on port. */
+message ofp_action_set_queue {
+    uint32 type = 1;           /* OFPAT_SET_QUEUE. */
+    uint32 queue_id = 3;       /* Queue id for the packets. */
+};
+
+message ofp_queue_stats_request {
+    uint32 port_no = 1;       /* All ports if OFPP_ANY. */
+    uint32 queue_id = 2;      /* All queues if OFPQ_ALL. */
+};
+
+message ofp_queue_stats {
+    uint32 port_no = 1;
+    uint32 queue_id = 2;      /* Queue i.d */
+    uint64 tx_bytes = 3;      /* Number of transmitted bytes. */
+    uint64 tx_packets = 4;    /* Number of transmitted packets. */
+    uint64 tx_errors = 5;     /* Number of packets dropped due to overrun. */
+    uint32 duration_sec = 6;  /* Time queue has been alive in seconds. */
+    uint32 duration_nsec = 7; /* Time queue has been alive in nanoseconds
+                                 beyond duration_sec. */
+};
+
+/* Configures the "role" of the sending controller.  The default role is:
+ *
+ *    - Equal (OFPCR_ROLE_EQUAL), which allows the controller access to all
+ *      OpenFlow features. All controllers have equal responsibility.
+ *
+ * The other possible roles are a related pair:
+ *
+ *    - Master (OFPCR_ROLE_MASTER) is equivalent to Equal, except that there
+ *      may be at most one Master controller at a time: when a controller
+ *      configures itself as Master, any existing Master is demoted to the
+ *      Slave role.
+ *
+ *    - Slave (OFPCR_ROLE_SLAVE) allows the controller read-only access to
+ *      OpenFlow features.  In particular attempts to modify the flow table
+ *      will be rejected with an OFPBRC_EPERM error.
+ *
+ *      Slave controllers do not receive OFPT_PACKET_IN or OFPT_FLOW_REMOVED
+ *      messages, but they do receive OFPT_PORT_STATUS messages.
+ */
+
+/* Controller roles. */
+enum ofp_controller_role {
+    OFPCR_ROLE_NOCHANGE = 0;    /* Don't change current role. */
+    OFPCR_ROLE_EQUAL    = 1;    /* Default role, full access. */
+    OFPCR_ROLE_MASTER   = 2;    /* Full access, at most one master. */
+    OFPCR_ROLE_SLAVE    = 3;    /* Read-only access. */
+};
+
+/* Role request and reply message. */
+message ofp_role_request {
+    //ofp_header header;        /* Type OFPT_ROLE_REQUEST/OFPT_ROLE_REPLY. */
+    ofp_controller_role role = 1; /* One of OFPCR_ROLE_*. */
+    uint64 generation_id = 2;     /* Master Election Generation Id */
+};
+
+/* Asynchronous message configuration. */
+message ofp_async_config {
+    //ofp_header header;    /* OFPT_GET_ASYNC_REPLY or OFPT_SET_ASYNC. */
+    repeated uint32 packet_in_mask = 1;   /* Bitmasks of OFPR_* values. */
+    repeated uint32 port_status_mask = 2; /* Bitmasks of OFPPR_* values. */
+    repeated uint32 flow_removed_mask = 3;/* Bitmasks of OFPRR_* values. */
+};
+
+
+/* ADDITIONAL VOLTHA SPECIFIC MESSAGE TYPES, AIDING RPC CALLS */
+
+message MeterModUpdate {
+    string id = 1;      // Device.id or LogicalDevice.id
+    ofp_meter_mod meter_mod = 2;
+}
+
+message MeterStatsReply {
+    repeated ofp_meter_stats meter_stats = 1;
+}
+
+message FlowTableUpdate {
+    string id = 1;  // Device.id or LogicalDevice.id
+    ofp_flow_mod flow_mod = 2;
+}
+
+message FlowGroupTableUpdate {
+    string id = 1;  // Device.id or LogicalDevice.id
+    ofp_group_mod group_mod = 2;
+}
+
+message Flows {
+    repeated ofp_flow_stats items = 1;
+}
+
+message Meters {
+    repeated ofp_meter_config items = 1;
+}
+
+message FlowGroups {
+    repeated ofp_group_entry items = 1;
+}
+
+message FlowChanges {
+    Flows to_add = 1;
+    Flows to_remove = 2;
+}
+
+message FlowGroupChanges {
+    FlowGroups to_add = 1;
+    FlowGroups to_remove = 2;
+}
+
+message PacketIn {
+    string id = 1;  // LogicalDevice.id
+    ofp_packet_in packet_in = 2;
+}
+
+message PacketOut {
+    string id = 1;  // LogicalDevice.id
+    ofp_packet_out packet_out = 2;
+}
+
+message ChangeEvent {
+    string id = 1; // LogicalDevice.id
+    oneof event {
+        ofp_port_status port_status = 2;
+    }
+}
diff --git a/protos/voltha_protos/openolt.proto b/protos/voltha_protos/openolt.proto
new file mode 100644
index 0000000..ddc8f74
--- /dev/null
+++ b/protos/voltha_protos/openolt.proto
@@ -0,0 +1,556 @@
+// Copyright (c) 2018 Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at:
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+syntax = "proto3";
+package openolt;
+import "google/api/annotations.proto";
+
+service Openolt {
+
+    rpc DisableOlt(Empty) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/Disable"
+          body: "*"
+        };
+    }
+
+    rpc ReenableOlt(Empty) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/Reenable"
+          body: "*"
+        };
+    }
+
+    rpc ActivateOnu(Onu) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/EnableOnu"
+          body: "*"
+        };
+    }
+
+    rpc DeactivateOnu(Onu) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/DisableOnu"
+          body: "*"
+        };
+    }
+
+    rpc DeleteOnu(Onu) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/DeleteOnu"
+          body: "*"
+        };
+    }
+
+    rpc OmciMsgOut(OmciMsg) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/OmciMsgOut"
+          body: "*"
+        };
+    }
+
+    rpc OnuPacketOut(OnuPacket) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/OnuPacketOut"
+          body: "*"
+        };
+    }
+
+    rpc UplinkPacketOut(UplinkPacket) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/UplinkPacketOut"
+          body: "*"
+        };
+    }
+
+    rpc FlowAdd(Flow) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/FlowAdd"
+          body: "*"
+        };
+    }
+
+    rpc FlowRemove(Flow) returns (Empty) {
+        option (google.api.http) = {
+          post: "/v1/FlowRemove"
+          body: "*"
+        };
+    }
+
+    rpc HeartbeatCheck(Empty) returns (Heartbeat) {
+        option (google.api.http) = {
+          post: "/v1/HeartbeatCheck"
+          body: "*"
+        };
+    }
+
+    rpc EnablePonIf(Interface) returns (Empty) {
+        option (google.api.http) = {
+            post: "/v1/EnablePonIf"
+            body: "*"
+        };
+    }
+
+    rpc DisablePonIf(Interface) returns (Empty) {
+        option (google.api.http) = {
+            post: "/v1/DisablePonIf"
+            body: "*"
+        };
+    }
+
+    rpc GetDeviceInfo(Empty) returns (DeviceInfo) {
+        option (google.api.http) = {
+            post: "/v1/GetDeviceInfo"
+            body: "*"
+        };
+    }
+
+    rpc Reboot(Empty) returns (Empty) {
+         option (google.api.http) = {
+            post: "/v1/Reboot"
+            body: "*"
+        };
+    }
+
+    rpc CollectStatistics(Empty) returns (Empty) {
+        option (google.api.http) = {
+            post: "/v1/CollectStatistics"
+            body: "*"
+        };
+    }
+
+    rpc CreateTconts(Tconts) returns (Empty) {
+        option (google.api.http) = {
+            post: "/v1/CreateTconts"
+            body: "*"
+        };
+    }
+
+    rpc RemoveTconts(Tconts) returns (Empty) {
+        option (google.api.http) = {
+            post: "/v1/RemoveTconts"
+            body: "*"
+        };
+    }
+
+    rpc EnableIndication(Empty) returns (stream Indication) {}
+}
+
+message Indication {
+    oneof data {
+        OltIndication olt_ind = 1;
+        IntfIndication intf_ind = 2;
+        IntfOperIndication intf_oper_ind = 3;
+        OnuDiscIndication onu_disc_ind = 4;
+        OnuIndication onu_ind = 5;
+        OmciIndication omci_ind = 6;
+        PacketIndication pkt_ind = 7;
+        PortStatistics port_stats = 8;
+        FlowStatistics flow_stats = 9;
+        AlarmIndication alarm_ind= 10;
+    }
+}
+
+message AlarmIndication {
+    oneof data {
+        LosIndication los_ind = 1;
+        DyingGaspIndication dying_gasp_ind = 2;
+        OnuAlarmIndication onu_alarm_ind = 3;
+        OnuStartupFailureIndication onu_startup_fail_ind = 4;
+        OnuSignalDegradeIndication onu_signal_degrade_ind = 5;
+        OnuDriftOfWindowIndication onu_drift_of_window_ind = 6;
+        OnuLossOfOmciChannelIndication onu_loss_omci_ind = 7;
+        OnuSignalsFailureIndication onu_signals_fail_ind = 8;
+        OnuTransmissionInterferenceWarning onu_tiwi_ind = 9;
+        OnuActivationFailureIndication onu_activation_fail_ind = 10;
+        OnuProcessingErrorIndication onu_processing_error_ind = 11;
+    }
+}
+
+message OltIndication {
+    string oper_state = 1;	// up, down
+}
+
+message IntfIndication {
+    fixed32 intf_id = 1;
+    string oper_state = 2;      // up, down
+}
+
+message OnuDiscIndication {
+    fixed32 intf_id = 1;
+    SerialNumber serial_number = 2;
+}
+
+message OnuIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string oper_state = 3;      // up, down
+    string admin_state = 5;     // up, down
+    SerialNumber serial_number = 4;
+}
+
+message IntfOperIndication {
+    string type = 1;		// nni, pon
+    fixed32 intf_id = 2;
+    string oper_state = 3;      // up, down
+}
+
+message OmciIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    bytes pkt = 3;
+}
+
+message PacketIndication {
+    string intf_type = 5;		// nni, pon, unknown
+    fixed32 intf_id = 1;
+    fixed32 gemport_id = 2;
+    fixed32 flow_id = 3;
+    fixed32 port_no = 6;
+    fixed64 cookie = 7;
+    bytes pkt = 4;
+}
+
+message Interface {
+    fixed32 intf_id = 1;
+}
+
+message Heartbeat {
+    fixed32 heartbeat_signature = 1;
+}
+
+message Onu {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    SerialNumber serial_number = 3;
+    fixed32 pir = 4;   // peak information rate assigned to onu
+}
+
+message OmciMsg {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    bytes pkt = 3;
+}
+
+message OnuPacket {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    fixed32 port_no = 4;
+    bytes pkt = 3;
+}
+
+message UplinkPacket {
+    fixed32 intf_id = 1;
+    bytes pkt = 2;
+}
+
+message DeviceInfo {
+    string vendor = 1;
+    string model = 2;
+    string hardware_version = 3;
+    string firmware_version = 4;
+    string device_id = 16;
+    string device_serial_number = 17;
+
+    // Total number of pon intf ports on the device
+    fixed32 pon_ports = 12;
+
+    // If using global per-device technology profile. To be deprecated
+    string technology = 5;
+    fixed32 onu_id_start = 6;
+    fixed32 onu_id_end = 7;
+    fixed32 alloc_id_start = 8;
+    fixed32 alloc_id_end = 9;
+    fixed32 gemport_id_start = 10;
+    fixed32 gemport_id_end = 11;
+    fixed32 flow_id_start = 13;
+    fixed32 flow_id_end = 14;
+
+    message DeviceResourceRanges {
+
+        // List of 0 or more intf_ids that use the same technology and pools.
+        // If 0 intf_ids supplied, it implies ALL interfaces
+        repeated fixed32 intf_ids = 1;
+
+        // Technology profile for this pool
+        string technology = 2;
+
+        message Pool {
+            enum PoolType {
+                ONU_ID = 0;
+                ALLOC_ID = 1;
+                GEMPORT_ID = 2;
+                FLOW_ID = 3;
+            }
+
+            enum SharingType {
+                DEDICATED_PER_INTF = 0;
+                SHARED_BY_ALL_INTF_ALL_TECH = 1; // Shared across all interfaces in all technologies in all ranges
+                SHARED_BY_ALL_INTF_SAME_TECH = 2; // Shared across all interfaces of the same technology used in this range
+            }
+
+            PoolType type = 1;
+	    SharingType sharing = 2;
+	    fixed32 start = 3; // lower bound on IDs allocated from this pool
+	    fixed32 end = 4; // upper bound on IDs allocated from this pool
+	}
+        repeated Pool pools = 3;
+    }
+    repeated DeviceResourceRanges ranges = 15;
+}
+
+message Classifier {
+    fixed32 o_tpid = 1;
+    fixed32 o_vid = 2;
+    fixed32 i_tpid = 3;
+    fixed32 i_vid = 4;
+    fixed32 o_pbits = 5;
+    fixed32 i_pbits = 6;
+    fixed32 eth_type = 7;
+    bytes dst_mac = 8;
+    bytes src_mac = 9;
+    fixed32 ip_proto = 10;
+    fixed32 dst_ip = 11;
+    fixed32 src_ip = 12;
+    fixed32 src_port = 13;
+    fixed32 dst_port = 14;
+    string pkt_tag_type = 15;	// untagged, single_tag, double_tag
+}
+
+message ActionCmd {
+    bool add_outer_tag = 1;
+    bool remove_outer_tag = 2;
+    bool trap_to_host = 3;
+}
+
+message Action {
+    ActionCmd cmd = 1;
+    fixed32 o_vid = 2;
+    fixed32 o_pbits = 3;
+    fixed32 o_tpid = 4;
+    fixed32 i_vid = 5;
+    fixed32 i_pbits = 6;
+    fixed32 i_tpid = 7;
+}
+
+message Flow {
+    sfixed32 access_intf_id = 1;
+    sfixed32 onu_id = 2;
+    sfixed32 uni_id = 11;
+    fixed32 flow_id = 3;
+    string flow_type = 4;	// upstream, downstream, broadcast, multicast
+    sfixed32 alloc_id = 10;
+    sfixed32 network_intf_id = 5;
+    sfixed32 gemport_id = 6;
+    Classifier classifier = 7;
+    Action action = 8;
+    sfixed32 priority = 9;
+    fixed64 cookie = 12; // must be provided for any flow with trap_to_host action. Returned in PacketIndication
+    fixed32 port_no = 13; // must be provided for any flow with trap_to_host action. Returned in PacketIndication
+}
+
+message SerialNumber {
+    bytes vendor_id = 1;
+    bytes vendor_specific = 2;
+}
+
+message PortStatistics {
+    fixed32 intf_id = 1;
+    fixed64 rx_bytes = 2;
+    fixed64 rx_packets = 3;
+    fixed64 rx_ucast_packets = 4;
+    fixed64 rx_mcast_packets = 5;
+    fixed64 rx_bcast_packets = 6;
+    fixed64 rx_error_packets = 7;
+    fixed64 tx_bytes = 8;
+    fixed64 tx_packets = 9;
+    fixed64 tx_ucast_packets = 10;
+    fixed64 tx_mcast_packets = 11;
+    fixed64 tx_bcast_packets = 12;
+    fixed64 tx_error_packets = 13;
+    fixed64 rx_crc_errors = 14;
+    fixed64 bip_errors = 15;
+    fixed32 timestamp = 16;
+}
+
+message FlowStatistics {
+    fixed32 flow_id = 1;
+    fixed64 rx_bytes = 2;
+    fixed64 rx_packets = 3;
+    fixed64 tx_bytes = 8;
+    fixed64 tx_packets = 9;
+    fixed32 timestamp = 16;
+}
+
+message LosIndication {
+    fixed32 intf_id = 1;
+    string status = 2;
+}
+
+message DyingGaspIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string status = 3;
+}
+
+message OnuAlarmIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string los_status = 3;
+    string lob_status = 4;
+    string lopc_miss_status = 5;
+    string lopc_mic_error_status = 6;
+}
+
+message OnuStartupFailureIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string status = 3;
+}
+
+message OnuSignalDegradeIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string status = 3;
+    fixed32 inverse_bit_error_rate = 4;
+}
+
+message OnuDriftOfWindowIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string status = 3;
+    fixed32 drift = 4;
+    fixed32 new_eqd = 5;
+}
+
+message OnuLossOfOmciChannelIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string status = 3;
+}
+
+message OnuSignalsFailureIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string status = 3;
+    fixed32 inverse_bit_error_rate = 4;
+}
+
+message OnuTransmissionInterferenceWarning {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    string status = 3;
+    fixed32 drift = 4;
+}
+
+message OnuActivationFailureIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+}
+
+message OnuProcessingErrorIndication {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+}
+
+enum Direction {
+    UPSTREAM = 0;
+    DOWNSTREAM = 1;
+    BIDIRECTIONAL = 2;
+}
+
+enum SchedulingPolicy {
+    WRR = 0;
+    StrictPriority = 1;
+    Hybrid = 2;
+}
+
+enum AdditionalBW {
+    AdditionalBW_None = 0;
+    AdditionalBW_NA = 1;
+    AdditionalBW_BestEffort = 2;
+    AdditionalBW_Auto = 3;
+}
+
+enum DiscardPolicy {
+    TailDrop = 0;
+    WTailDrop = 1;
+    Red = 2;
+    WRed = 3;
+}
+
+enum InferredAdditionBWIndication {
+    InferredAdditionBWIndication_None = 0;
+    InferredAdditionBWIndication_Assured = 1;
+    InferredAdditionBWIndication_BestEffort = 2;
+}
+
+message Scheduler {
+    Direction direction = 1;
+    AdditionalBW additional_bw = 2; // Valid on for “direction == Upstream”.
+    fixed32 priority = 3;
+    fixed32 weight = 4;
+    SchedulingPolicy sched_policy = 5;
+}
+
+message TrafficShapingInfo {
+    fixed32 cir = 1;
+    fixed32 cbs = 2;
+    fixed32 pir = 3;
+    fixed32 pbs = 4;
+    fixed32 gir = 5; // only if “direction == Upstream ”
+    InferredAdditionBWIndication add_bw_ind = 6; // only if “direction == Upstream”
+}
+
+message Tcont {
+    Direction direction = 1;
+    fixed32 alloc_id = 2; // valid only if “direction == Upstream ”
+    Scheduler scheduler = 3;
+    TrafficShapingInfo traffic_shaping_info = 4;
+}
+
+message Tconts {
+    fixed32 intf_id = 1;
+    fixed32 onu_id = 2;
+    fixed32 uni_id = 4;
+    fixed32 port_no = 5;
+    repeated Tcont tconts = 3;
+}
+
+message TailDropDiscardConfig {
+    fixed32 queue_size = 1;
+}
+
+message RedDiscardConfig {
+    fixed32 min_threshold = 1;
+    fixed32 max_threshold = 2;
+    fixed32 max_probability = 3;
+}
+
+message WRedDiscardConfig {
+    RedDiscardConfig green = 1;
+    RedDiscardConfig yellow = 2;
+    RedDiscardConfig red = 3;
+}
+
+message DiscardConfig {
+    DiscardPolicy discard_policy = 1;
+    oneof discard_config {
+        TailDropDiscardConfig tail_drop_discard_config = 2;
+        RedDiscardConfig red_discard_config = 3;
+        WRedDiscardConfig wred_discard_config = 4;
+    }
+}
+
+message Empty {}
diff --git a/protos/voltha_protos/schema.proto b/protos/voltha_protos/schema.proto
new file mode 100644
index 0000000..bb1f895
--- /dev/null
+++ b/protos/voltha_protos/schema.proto
@@ -0,0 +1,40 @@
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/schema";
+
+package schema;
+
+import "google/api/annotations.proto";
+import "google/protobuf/empty.proto";
+
+// Contains the name and content of a *.proto file
+message ProtoFile {
+    string file_name = 1;  // name of proto file
+    string proto = 2;  // content of proto file
+    bytes descriptor = 3;  // compiled descriptor for proto (zlib compressed)
+}
+
+// Proto files and compiled descriptors for this interface
+message Schemas {
+
+    // Proto files
+    repeated ProtoFile protos = 1;
+
+    // Proto file name from which swagger.json shall be generated
+    string swagger_from = 2;
+
+    // Proto file name from which yang schemas shall be generated
+    string yang_from = 3;
+}
+
+// Schema services
+service SchemaService {
+
+    // Return active grpc schemas
+    rpc GetSchema(google.protobuf.Empty) returns (Schemas) {
+        option (google.api.http) = {
+            get: "/schema"
+        };
+    }
+
+}
diff --git a/protos/voltha_protos/voltha.proto b/protos/voltha_protos/voltha.proto
new file mode 100644
index 0000000..cc785f1
--- /dev/null
+++ b/protos/voltha_protos/voltha.proto
@@ -0,0 +1,580 @@
+/*
+ * Top-level Voltha API definition
+ *
+ * For details, see individual definition files.
+ */
+
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/voltha";
+
+package voltha;
+
+import "google/api/annotations.proto";
+import "google/protobuf/empty.proto";
+
+import public "voltha_protos/meta.proto";
+import public "voltha_protos/common.proto";
+import public "voltha_protos/health.proto";
+import public "voltha_protos/logical_device.proto";
+import public "voltha_protos/device.proto";
+import public "voltha_protos/adapter.proto";
+import public "voltha_protos/openflow_13.proto";
+
+import "voltha_protos/omci_mib_db.proto";
+import "voltha_protos/omci_alarm_db.proto";
+import "voltha_protos/yang_options.proto";
+
+option java_package = "org.opencord.voltha";
+option java_outer_classname = "VolthaProtos";
+option csharp_namespace = "Opencord.Voltha.Voltha";
+
+message DeviceGroup {
+
+    string id = 1 [(access) = READ_ONLY];
+
+    repeated LogicalDevice logical_devices = 2 [(child_node) = {key: "id"}];
+
+    repeated Device devices = 3 [(child_node) = {key: "id"}];
+}
+
+message DeviceGroups {
+    repeated DeviceGroup items = 1;
+}
+
+
+message AlarmFilterRuleKey {
+    option (yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+    enum AlarmFilterRuleKey {
+        id = 0;
+        type = 1;
+        severity = 2;
+        resource_id = 3;
+        category = 4;
+        device_id = 5;
+    }
+}
+
+message AlarmFilterRule {
+    AlarmFilterRuleKey.AlarmFilterRuleKey key = 1;
+    string value = 2;
+}
+message AlarmFilter {
+    string id = 1 [(access) = READ_ONLY];
+
+    repeated AlarmFilterRule rules = 2;
+}
+
+message AlarmFilters {
+    repeated AlarmFilter filters = 1;
+}
+
+message Logging {
+    LogLevel.LogLevel level = 1;
+    string package_name = 2;
+}
+
+// CoreInstance represents a core instance.  It is data held in memory when a core
+// is running.  This data is not persistent.
+message CoreInstance {
+    option (yang_message_rule) = CREATE_BOTH_GROUPING_AND_CONTAINER;
+
+    string instance_id = 1  [(access) = READ_ONLY];
+
+    HealthStatus health = 2 [(child_node) = {}];
+
+}
+
+message CoreInstances {
+    option (yang_message_rule) = CREATE_BOTH_GROUPING_AND_CONTAINER;
+    repeated CoreInstance items = 1;
+}
+
+// Voltha represents the Voltha cluster data.  Each Core instance will hold a subset of
+// the entire cluster. However, some items (e.g. adapters) will be held by all cores
+// for better performance
+message Voltha {
+    option (yang_message_rule) = CREATE_BOTH_GROUPING_AND_CONTAINER;
+
+    string version = 1 [(access) = READ_ONLY];
+
+    repeated Adapter adapters = 2 [(child_node) = {key: "id"}];
+
+    repeated LogicalDevice logical_devices = 3 [(child_node) = {key: "id"}];
+
+    repeated Device devices = 4 [(child_node) = {key: "id"}];
+
+    repeated DeviceType device_types = 5 [(child_node) = {key: "id"}];
+
+    repeated DeviceGroup device_groups = 6 [(child_node) = {key: "id"}];
+
+    repeated AlarmFilter alarm_filters = 7 [(child_node) = {key: "id"}];
+
+    repeated
+        omci.MibDeviceData omci_mib_database = 28
+        [(child_node) = {key: "device_id"}];
+
+    repeated
+        alarm.AlarmDeviceData omci_alarm_database = 29
+        [(child_node) = {key: "device_id"}];
+}
+
+// Device Self Test Response
+message SelfTestResponse {
+    option (yang_child_rule) = MOVE_TO_PARENT_LEVEL;
+
+	enum SelfTestResult  {
+	    SUCCESS = 0;
+	    FAILURE = 1;
+	    NOT_SUPPORTED = 2;
+	    UNKNOWN_ERROR = 3;
+    }
+    SelfTestResult result = 1;
+}
+
+message OfAgentSubscriber {
+    // ID of ofagent instance
+    string ofagent_id = 1;
+
+    // ID of voltha instance to which the ofagent is subscribed
+    string voltha_id = 2;
+}
+
+/*
+ * Voltha APIs
+ *
+ */
+service VolthaService {
+
+    // Get more information on a given physical device
+    rpc UpdateLogLevel(Logging) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            get: "/api/v1/logs"
+        };
+    }
+
+    // Get high level information on the Voltha cluster
+    rpc GetVoltha(google.protobuf.Empty) returns(Voltha) {
+        option (google.api.http) = {
+            get: "/api/v1"
+        };
+    }
+
+    // List all Voltha cluster core instances
+    rpc ListCoreInstances(google.protobuf.Empty) returns(CoreInstances) {
+        option (google.api.http) = {
+            get: "/api/v1/instances"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'items';
+        option (voltha.yang_xml_tag).list_items_name = 'items';
+    }
+
+    // Get details on a Voltha cluster instance
+    rpc GetCoreInstance(ID) returns(CoreInstance) {
+        option (google.api.http) = {
+            get: "/api/v1/instances/{id}"
+        };
+    }
+
+    // List all active adapters (plugins) in the Voltha cluster
+    rpc ListAdapters(google.protobuf.Empty) returns(Adapters) {
+        option (google.api.http) = {
+            get: "/api/v1/adapters"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'adapters';
+    }
+
+
+    // List all logical devices managed by the Voltha cluster
+    rpc ListLogicalDevices(google.protobuf.Empty) returns(LogicalDevices) {
+        option (google.api.http) = {
+            get: "/api/v1/logical_devices"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'logical_devices';
+    }
+
+    // Get additional information on a given logical device
+    rpc GetLogicalDevice(ID) returns(LogicalDevice) {
+        option (google.api.http) = {
+            get: "/api/v1/logical_devices/{id}"
+        };
+    }
+
+    // List ports of a logical device
+    rpc ListLogicalDevicePorts(ID) returns(LogicalPorts) {
+        option (google.api.http) = {
+            get: "/api/v1/logical_devices/{id}/ports"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'ports';
+    }
+
+    // Gets a logical device port
+    rpc GetLogicalDevicePort(LogicalPortId) returns(LogicalPort) {
+        option (google.api.http) = {
+            get: "/api/v1/logical_devices/{id}/ports/{port_id}"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'port';
+    }
+
+    // Enables a logical device port
+    rpc EnableLogicalDevicePort(LogicalPortId) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/logical_devices/{id}/ports/{port_id}/enable"
+        };
+    }
+
+    // Disables a logical device port
+    rpc DisableLogicalDevicePort(LogicalPortId) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/logical_devices/{id}/ports/{port_id}/disable"
+        };
+    }
+
+    // List all flows of a logical device
+    rpc ListLogicalDeviceFlows(ID) returns(openflow_13.Flows) {
+        option (google.api.http) = {
+            get: "/api/v1/logical_devices/{id}/flows"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'flows';
+        option (voltha.yang_xml_tag).list_items_name = 'items';
+    }
+
+    // Update flow table for logical device
+    rpc UpdateLogicalDeviceFlowTable(openflow_13.FlowTableUpdate)
+            returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/logical_devices/{id}/flows"
+            body: "*"
+        };
+    }
+
+    // Update meter table for logical device
+    rpc UpdateLogicalDeviceMeterTable(openflow_13.MeterModUpdate)
+            returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/logical_devices/{id}/meters"
+            body: "*"
+        };
+    }
+
+    // Get all meter stats for logical device
+    rpc GetMeterStatsOfLogicalDevice(ID)
+            returns(openflow_13.MeterStatsReply) {
+        option (google.api.http) = {
+            get: "/api/v1/logical_devices/{id}/meters_stats"
+        };
+    }
+
+    // List all flow groups of a logical device
+    rpc ListLogicalDeviceFlowGroups(ID) returns(openflow_13.FlowGroups) {
+        option (google.api.http) = {
+            get: "/api/v1/logical_devices/{id}/flow_groups"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'flow_groups';
+        option (voltha.yang_xml_tag).list_items_name = 'items';
+    }
+
+    // Update group table for device
+    rpc UpdateLogicalDeviceFlowGroupTable(openflow_13.FlowGroupTableUpdate)
+            returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/logical_devices/{id}/flow_groups"
+            body: "*"
+        };
+    }
+
+    // List all physical devices controlled by the Voltha cluster
+    rpc ListDevices(google.protobuf.Empty) returns(Devices) {
+        option (google.api.http) = {
+            get: "/api/v1/devices"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'devices';
+    }
+
+    // List all physical devices IDs controlled by the Voltha cluster
+    rpc ListDeviceIds(google.protobuf.Empty) returns(IDs) {
+        option (google.api.http) = {
+            get: "/api/v1/deviceids"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'id';
+        option (voltha.yang_xml_tag).list_items_name = 'items';
+    }
+
+    // Request to a voltha Core to reconcile a set of devices based on their IDs
+    rpc ReconcileDevices(IDs) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/deviceids"
+            body: "*"
+        };
+    }
+
+    // Get more information on a given physical device
+    rpc GetDevice(ID) returns(Device) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}"
+        };
+    }
+
+    // Pre-provision a new physical device
+    rpc CreateDevice(Device) returns(Device) {
+        option (google.api.http) = {
+            post: "/api/v1/devices"
+            body: "*"
+        };
+    }
+
+    // Enable a device.  If the device was in pre-provisioned state then it
+    // will transition to ENABLED state.  If it was is DISABLED state then it
+    // will transition to ENABLED state as well.
+    rpc EnableDevice(ID) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/enable"
+        };
+    }
+
+    // Disable a device
+    rpc DisableDevice(ID) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/disable"
+        };
+    }
+
+    // Reboot a device
+    rpc RebootDevice(ID) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/reboot"
+        };
+    }
+
+    // Delete a device
+    rpc DeleteDevice(ID) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            delete: "/api/v1/devices/{id}/delete"
+        };
+    }
+
+    // Request an image download to the standby partition
+    // of a device.
+    // Note that the call is expected to be non-blocking.
+    rpc DownloadImage(ImageDownload) returns(OperationResp) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/image_downloads/{name}"
+            body: "*"
+        };
+    }
+
+    // Get image download status on a device
+    // The request retrieves progress on device and updates db record
+    rpc GetImageDownloadStatus(ImageDownload) returns(ImageDownload) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}/image_downloads/{name}/status"
+        };
+    }
+
+    // Get image download db record
+    rpc GetImageDownload(ImageDownload) returns(ImageDownload) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}/image_downloads/{name}"
+        };
+    }
+
+    // List image download db records for a given device
+    rpc ListImageDownloads(ID) returns(ImageDownloads) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}/image_downloads"
+        };
+    }
+
+    // Cancel an existing image download process on a device
+    rpc CancelImageDownload(ImageDownload) returns(OperationResp) {
+        option (google.api.http) = {
+            delete: "/api/v1/devices/{id}/image_downloads/{name}"
+        };
+    }
+
+    // Activate the specified image at a standby partition
+    // to active partition.
+    // Depending on the device implementation, this call
+    // may or may not cause device reboot.
+    // If no reboot, then a reboot is required to make the
+    // activated image running on device
+    // Note that the call is expected to be non-blocking.
+    rpc ActivateImageUpdate(ImageDownload) returns(OperationResp) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/image_downloads/{name}/image_update"
+            body: "*"
+        };
+    }
+
+    // Revert the specified image at standby partition
+    // to active partition, and revert to previous image
+    // Depending on the device implementation, this call
+    // may or may not cause device reboot.
+    // If no reboot, then a reboot is required to make the
+    // previous image running on device
+    // Note that the call is expected to be non-blocking.
+    rpc RevertImageUpdate(ImageDownload) returns(OperationResp) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/image_downloads/{name}/image_revert"
+            body: "*"
+        };
+    }
+
+    // List ports of a device
+    rpc ListDevicePorts(ID) returns(Ports) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}/ports"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'ports';
+    }
+
+    // List pm config of a device
+    rpc ListDevicePmConfigs(ID) returns(PmConfigs) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}/pm_configs"
+        };
+    }
+
+    // Update the pm config of a device
+    rpc UpdateDevicePmConfigs(voltha.PmConfigs) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/pm_configs"
+            body: "*"
+        };
+    }
+
+    // List all flows of a device
+    rpc ListDeviceFlows(ID) returns(openflow_13.Flows) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}/flows"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'flows';
+        option (voltha.yang_xml_tag).list_items_name = 'items';
+    }
+
+    // List all flow groups of a device
+    rpc ListDeviceFlowGroups(ID) returns(openflow_13.FlowGroups) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}/flow_groups"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'flow_groups';
+        option (voltha.yang_xml_tag).list_items_name = 'items';
+    }
+
+    // List device types known to Voltha
+    rpc ListDeviceTypes(google.protobuf.Empty) returns(DeviceTypes) {
+        option (google.api.http) = {
+            get: "/api/v1/device_types"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'device_types';
+    }
+
+    // Get additional information on a device type
+    rpc GetDeviceType(ID) returns(DeviceType) {
+        option (google.api.http) = {
+            get: "/api/v1/device_types/{id}"
+        };
+    }
+
+    // List all device sharding groups
+    rpc ListDeviceGroups(google.protobuf.Empty) returns(DeviceGroups) {
+        option (google.api.http) = {
+            get: "/api/v1/device_groups"
+        };
+        option (voltha.yang_xml_tag).xml_tag = 'device_groups';
+    }
+
+    // Stream control packets to the dataplane
+    rpc StreamPacketsOut(stream openflow_13.PacketOut)
+        returns(google.protobuf.Empty) {
+        // This does not have an HTTP representation
+    }
+
+    // Receive control packet stream
+    rpc ReceivePacketsIn(google.protobuf.Empty)
+        returns(stream openflow_13.PacketIn) {
+        // This does not have an HTTP representation
+    }
+
+    rpc ReceiveChangeEvents(google.protobuf.Empty)
+        returns(stream openflow_13.ChangeEvent) {
+        // This does not have an HTTP representation
+    }
+
+    // Get additional information on a device group
+    rpc GetDeviceGroup(ID) returns(DeviceGroup) {
+        option (google.api.http) = {
+            get: "/api/v1/device_groups/{id}"
+        };
+    }
+
+    rpc CreateAlarmFilter(AlarmFilter) returns(AlarmFilter) {
+        option (google.api.http) = {
+            post: "/api/v1/alarm_filters"
+            body: "*"
+        };
+    }
+
+    rpc GetAlarmFilter(ID) returns(AlarmFilter) {
+        option (google.api.http) = {
+            get: "/api/v1/alarm_filters/{id}"
+        };
+    }
+
+    rpc UpdateAlarmFilter(AlarmFilter) returns(AlarmFilter) {
+        option (google.api.http) = {
+            put: "/api/v1/alarm_filters/{id}"
+            body: "*"
+        };
+    }
+
+    rpc DeleteAlarmFilter(ID) returns(google.protobuf.Empty) {
+        option (google.api.http) = {
+            delete: "/api/v1/alarm_filters/{id}"
+        };
+    }
+
+    rpc ListAlarmFilters(google.protobuf.Empty) returns(AlarmFilters) {
+        option (google.api.http) = {
+            get: "/api/v1/alarm_filters"
+        };
+    }
+
+    rpc GetImages(ID) returns(Images) {
+        option (google.api.http) = {
+            get: "/api/v1/devices/{id}/images"
+        };
+    }
+
+    rpc SelfTest(ID) returns(SelfTestResponse) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/self_test"
+        };
+    }
+
+    // OpenOMCI MIB information
+    rpc GetMibDeviceData(ID) returns(omci.MibDeviceData) {
+        option (google.api.http) = {
+            get: "/api/v1/openomci/{id}/mib"
+        };
+    }
+
+    // OpenOMCI ALARM information
+    rpc GetAlarmDeviceData(ID) returns(alarm.AlarmDeviceData) {
+        option (google.api.http) = {
+            get: "/api/v1/openomci/{id}/alarm"
+        };
+    }
+
+    // Simulate an Alarm
+    rpc SimulateAlarm(SimulateAlarmRequest) returns(OperationResp) {
+        option (google.api.http) = {
+            post: "/api/v1/devices/{id}/simulate_larm"
+            body: "*"
+        };
+    }
+    rpc Subscribe (OfAgentSubscriber) returns (OfAgentSubscriber) {
+    }
+}
+
diff --git a/protos/voltha_protos/yang_options.proto b/protos/voltha_protos/yang_options.proto
new file mode 100644
index 0000000..25f70a8
--- /dev/null
+++ b/protos/voltha_protos/yang_options.proto
@@ -0,0 +1,74 @@
+// Copyright (c) 2015, Google Inc.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// This file contains annotation definitions that can be used to describe
+// a configuration tree.
+
+syntax = "proto3";
+
+option go_package = "github.com/opencord/voltha-go/protos/common";
+
+package voltha;
+
+import "google/protobuf/descriptor.proto";
+
+enum MessageParserOption {
+    // Move any enclosing child enum/message definition to the same level
+    // as the parent (this message) in the yang generated file
+    MOVE_TO_PARENT_LEVEL= 0;
+
+    // Create both a grouping and a container for this message.  The container
+    // name will be the message name.  The grouping name will be the message
+    // name prefixed with "grouping_"
+    CREATE_BOTH_GROUPING_AND_CONTAINER = 1;
+}
+
+message InlineNode {
+    string id = 1;
+    string type = 2;
+}
+
+message RpcReturnDef {
+    // The gRPC methods return message types.  NETCONF expects an actual
+    // attribute as defined in the YANG schema.  The xnl_tag will be used
+    // as the top most tag when translating a gRPC response into an xml
+    // response
+    string xml_tag = 1;
+
+    // When the gRPC response is a list of items, we need to differentiate
+    // between a YANG schema attribute whose name is "items" and when "items"
+    // is used only to indicate a list of items is being returned.  The default
+    // behavior assumes a list is returned when "items" is present in
+    // the response.  This option will therefore be used when the attribute
+    // name in the YANG schema is 'items'
+    string list_items_name = 2;
+}
+
+extend google.protobuf.MessageOptions {
+    // This annotation is used to indicate how a message is parsed when
+    // converting from proto to yang format.
+    MessageParserOption yang_child_rule = 7761774;
+
+    MessageParserOption yang_message_rule = 7761775;
+}
+
+extend google.protobuf.FieldOptions {
+    // If present, the field (a message reference) should be replaced by the
+    // message itself.  For now, this applies only to non-repeated fields.
+    InlineNode yang_inline_node = 7761776;
+}
+
+extend google.protobuf.MethodOptions {
+    RpcReturnDef yang_xml_tag = 7761777;
+}
diff --git a/python/__init__.py b/python/__init__.py
new file mode 100644
index 0000000..19d1424
--- /dev/null
+++ b/python/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2019-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/python/test/__init__.py b/python/test/__init__.py
new file mode 100644
index 0000000..19d1424
--- /dev/null
+++ b/python/test/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2019-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/python/test/test_protos.py b/python/test/test_protos.py
new file mode 100644
index 0000000..552d5b5
--- /dev/null
+++ b/python/test/test_protos.py
@@ -0,0 +1,36 @@
+# Copyright 2019-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from __future__ import absolute_import, print_function
+import unittest
+
+from google.api import annotations_pb2
+from voltha_protos import voltha_pb2
+
+print("imported api annotations properly")
+
+
+class TestProtos(unittest.TestCase):
+
+    @classmethod
+    def setUpClass(self):
+        print("in setup")
+
+    def test_proto_call(self):
+        """ initialization """
+
+        image_downloader = voltha_pb2.ImageDownload()
+
+        self.assertIsNotNone(image_downloader)
+
diff --git a/python/voltha_protos/__init__.py b/python/voltha_protos/__init__.py
new file mode 100644
index 0000000..19d1424
--- /dev/null
+++ b/python/voltha_protos/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2019-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/setup.py b/setup.py
new file mode 100644
index 0000000..056438a
--- /dev/null
+++ b/setup.py
@@ -0,0 +1,47 @@
+# Copyright 2019-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from setuptools import setup, find_packages
+
+
+def version():
+    with open('VERSION') as f:
+        return f.read()
+
+
+setup(
+    name='voltha-protos',
+    version=version(),
+    description='Protobuf interface definitions',
+    author='VOLTHA project',
+    author_email='voltha-dev@opencord.org',
+    url='https://gerrit.opencord.org/gitweb?p=voltha-protos.git',
+    license='Apache Software License',
+    classifiers=[
+        'Development Status :: 5 - Production/Stable',
+        'Intended Audience :: Developers',
+        'License :: OSI Approved :: Apache Software License',
+        'Programming Language :: Python :: 2.7',
+        'Programming Language :: Python :: 3.5',
+        'Programming Language :: Python :: 3.6',
+        'Programming Language :: Python :: 3.7',
+    ],
+    keywords='protobuf voltha',
+    packages = find_packages(where="python"),
+    package_dir = {"": "python"},
+    install_requires = [
+        "googleapis-common-protos~=1.5.6"
+    ],
+    include_package_data=True,
+)
diff --git a/tox.ini b/tox.ini
new file mode 100644
index 0000000..0f32f70
--- /dev/null
+++ b/tox.ini
@@ -0,0 +1,41 @@
+; Copyright 2019-present Open Networking Foundation
+;
+; Licensed under the Apache License, Version 2.0 (the "License");
+; you may not use this file except in compliance with the License.
+; You may obtain a copy of the License at
+;
+; http://www.apache.org/licenses/LICENSE-2.0
+;
+; Unless required by applicable law or agreed to in writing, software
+; distributed under the License is distributed on an "AS IS" BASIS,
+; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; See the License for the specific language governing permissions and
+; limitations under the License.
+
+[tox]
+envlist = py27,py35,py36,py37
+skip_missing_interpreters = true
+
+[testenv]
+deps =
+  nose2
+
+commands =
+  nose2 -c tox.ini --verbose --junit-xml
+
+[flake8]
+max-line-length = 119
+
+[unittest]
+plugins=nose2.plugins.junitxml
+
+[junit-xml]
+path=nose2-results.xml
+
+[coverage]
+always-on = True
+coverage =
+  python
+coverage-report =
+  xml
+  term