Gitiles
Code Review Sign In
gerrit.opencord.org / voltha-protos / b6b797cceae987556bc705acc6273b1c7e43ce05 / . / protos / voltha_protos / openflow_13.proto
blob: 2a0eec23540656bbe9d009a43b3da812477573a4 [file] [log] [blame]
/* Copyright (c) 2008 The Board of Trustees of The Leland Stanford
* Junior University
* Copyright (c) 2011, 2012 Open Networking Foundation
*
* We are making the OpenFlow specification and associated documentation
* (Software) available for public use and benefit with the expectation
* that others will use, modify and enhance the Software and contribute
* those enhancements back to the community. However, since we would
* like to make the Software available for broadest use, with as few
* restrictions as possible permission is hereby granted, free of
* charge, to any person obtaining a copy of this Software to deal in
* the Software under the copyrights without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* The name and trademarks of copyright holder(s) may NOT be used in
* advertising or publicity pertaining to the Software or any
* derivatives without specific, written prior permission.
*/
/* OpenFlow: protocol between controller and datapath. */
/*
* This is a relatively straightforward rendering of OpenFlow message
* definitions into protocol buffer messages. We preserved the snake
* case syntax, and made the following changes:
* - all pad fields dropped
* - for each enum value above 0x7fffffff the MSB is dropped. For example,
* 0xffffffff is now 0x7fffffff.
* - '<type> thing[...]' is replaced with 'repeated <type> thing'
* - 'char thing[...]' is replaced with 'string thing'
* - 'uint8_t data[...]' is replaced with 'bytes data'
* - the following systematic changes are done to various integer types:
* uint8_t -> uint32
* uint16_t -> uint32
* uint32_t -> uint32
* uint64_t -> uint64
* - removed most length, len, size fields where these values can be determined
* from the explicitly encoded length of "repeated" protobuf fields.
* - explicit use of enum types whereever it is unambigous (and not used as
* bitmask/flags value.
*
*/
syntax = "proto3";
option go_package = "github.com/opencord/voltha-protos/go/openflow_13";
package openflow_13;
import "google/api/annotations.proto";
import public "voltha_protos/yang_options.proto";
/* Version number:
* OpenFlow versions released: 0x01 = 1.0 ; 0x02 = 1.1 ; 0x03 = 1.2
* 0x04 = 1.3
*/
/* The most significant bit in the version field is reserved and must
* be set to zero.
*/
//#define OFP_VERSION 0x04
//#define PIPELINE_TABLES 64
//#define OFP_MAX_TABLE_NAME_LEN 32
//#define OFP_MAX_PORT_NAME_LEN 16
/* Official IANA registered port for OpenFlow. */
//#define OFP_TCP_PORT 6653
//#define OFP_SSL_PORT 6653
//#define OFP_ETH_ALEN 6 /* Bytes in an Ethernet address. */
/* Port numbering. Ports are numbered starting from 1. */
enum ofp_port_no {
OFPP_INVALID = 0;
/* Maximum number of physical and logical switch ports. */
OFPP_MAX = 0x7fffff00;
/* Reserved OpenFlow Port (fake output "ports"). */
OFPP_IN_PORT = 0x7ffffff8; /* Send the packet out the input port. This
reserved port must be explicitly used
in order to send back out of the input
port. */
OFPP_TABLE = 0x7ffffff9; /* Submit the packet to the first flow table
NB: This destination port can only be
used in packet-out messages. */
OFPP_NORMAL = 0x7ffffffa; /* Forward using non-OpenFlow pipeline. */
OFPP_FLOOD = 0x7ffffffb; /* Flood using non-OpenFlow pipeline. */
OFPP_ALL = 0x7ffffffc; /* All standard ports except input port. */
OFPP_CONTROLLER = 0x7ffffffd; /* Send to controller. */
OFPP_LOCAL = 0x7ffffffe; /* Local openflow "port". */
OFPP_ANY = 0x7fffffff; /* Special value used in some requests when
no port is specified (i.e. wildcarded).*/
};
enum ofp_type {
/* Immutable messages. */
OFPT_HELLO = 0; /* Symmetric message */
OFPT_ERROR = 1; /* Symmetric message */
OFPT_ECHO_REQUEST = 2; /* Symmetric message */
OFPT_ECHO_REPLY = 3; /* Symmetric message */
OFPT_EXPERIMENTER = 4; /* Symmetric message */
/* Switch configuration messages. */
OFPT_FEATURES_REQUEST = 5; /* Controller/switch message */
OFPT_FEATURES_REPLY = 6; /* Controller/switch message */
OFPT_GET_CONFIG_REQUEST = 7; /* Controller/switch message */
OFPT_GET_CONFIG_REPLY = 8; /* Controller/switch message */
OFPT_SET_CONFIG = 9; /* Controller/switch message */
/* Asynchronous messages. */
OFPT_PACKET_IN = 10; /* Async message */
OFPT_FLOW_REMOVED = 11; /* Async message */
OFPT_PORT_STATUS = 12; /* Async message */
/* Controller command messages. */
OFPT_PACKET_OUT = 13; /* Controller/switch message */
OFPT_FLOW_MOD = 14; /* Controller/switch message */
OFPT_GROUP_MOD = 15; /* Controller/switch message */
OFPT_PORT_MOD = 16; /* Controller/switch message */
OFPT_TABLE_MOD = 17; /* Controller/switch message */
/* Multipart messages. */
OFPT_MULTIPART_REQUEST = 18; /* Controller/switch message */
OFPT_MULTIPART_REPLY = 19; /* Controller/switch message */
/* Barrier messages. */
OFPT_BARRIER_REQUEST = 20; /* Controller/switch message */
OFPT_BARRIER_REPLY = 21; /* Controller/switch message */
/* Queue Configuration messages. */
OFPT_QUEUE_GET_CONFIG_REQUEST = 22; /* Controller/switch message */
OFPT_QUEUE_GET_CONFIG_REPLY = 23; /* Controller/switch message */
/* Controller role change request messages. */
OFPT_ROLE_REQUEST = 24; /* Controller/switch message */
OFPT_ROLE_REPLY = 25; /* Controller/switch message */
/* Asynchronous message configuration. */
OFPT_GET_ASYNC_REQUEST = 26; /* Controller/switch message */
OFPT_GET_ASYNC_REPLY = 27; /* Controller/switch message */
OFPT_SET_ASYNC = 28; /* Controller/switch message */
/* Meters and rate limiters configuration messages. */
OFPT_METER_MOD = 29; /* Controller/switch message */
};
/* Header on all OpenFlow packets. */
message ofp_header {
uint32 version = 1; /* OFP_VERSION. */
ofp_type type = 2; /* One of the OFPT_ constants. */
uint32 xid = 3; /* Transaction id associated with this packet.
Replies use the same id as was in the request
to facilitate pairing. */
};
/* Hello elements types.
*/
enum ofp_hello_elem_type {
OFPHET_INVALID = 0;
OFPHET_VERSIONBITMAP = 1; /* Bitmap of version supported. */
};
/* Common header for all Hello Elements */
message ofp_hello_elem_header {
ofp_hello_elem_type type = 1; /* One of OFPHET_*. */
oneof element {
ofp_hello_elem_versionbitmap versionbitmap = 2;
}
};
/* Version bitmap Hello Element */
message ofp_hello_elem_versionbitmap {
repeated uint32 bitmaps = 2; /* List of bitmaps - supported versions */
};
/* OFPT_HELLO. This message includes zero or more hello elements having
* variable size. Unknown elements types must be ignored/skipped, to allow
* for future extensions. */
message ofp_hello {
//ofp_header header;
/* Hello element list */
repeated ofp_hello_elem_header elements = 1; /* 0 or more */
};
//#define OFP_DEFAULT_MISS_SEND_LEN 128
enum ofp_config_flags {
/* Handling of IP fragments. */
OFPC_FRAG_NORMAL = 0; /* No special handling for fragments. */
OFPC_FRAG_DROP = 1; /* Drop fragments. */
OFPC_FRAG_REASM = 2; /* Reassemble (only if OFPC_IP_REASM set). */
OFPC_FRAG_MASK = 3; /* Bitmask of flags dealing with frag. */
};
/* Switch configuration. */
message ofp_switch_config {
//ofp_header header;
uint32 flags = 1; /* Bitmap of OFPC_* flags. */
uint32 miss_send_len = 2; /* Max bytes of packet that datapath
should send to the controller. See
ofp_controller_max_len for valid values.
*/
};
/* Flags to configure the table. Reserved for future use. */
enum ofp_table_config {
OFPTC_INVALID = 0;
OFPTC_DEPRECATED_MASK = 3; /* Deprecated bits */
};
/* Table numbering. Tables can use any number up to OFPT_MAX. */
enum ofp_table {
OFPTT_INVALID = 0;
/* Last usable table number. */
OFPTT_MAX = 0xfe;
/* Fake tables. */
OFPTT_ALL = 0xff; /* Wildcard table used for table config,
flow stats and flow deletes. */
};
/* Configure/Modify behavior of a flow table */
message ofp_table_mod {
//ofp_header header;
uint32 table_id = 1; /* ID of the table, OFPTT_ALL indicates all tables */
uint32 config = 2; /* Bitmap of OFPTC_* flags */
};
/* Capabilities supported by the datapath. */
enum ofp_capabilities {
OFPC_INVALID = 0;
OFPC_FLOW_STATS = 1; /* Flow statistics. */
OFPC_TABLE_STATS = 2; /* Table statistics. */
OFPC_PORT_STATS = 4; /* Port statistics. */
OFPC_GROUP_STATS = 8; /* Group statistics. */
OFPC_IP_REASM = 32; /* Can reassemble IP fragments. */
OFPC_QUEUE_STATS = 64; /* Queue statistics. */
OFPC_PORT_BLOCKED = 256; /* Switch will block looping ports. */
};
/* Flags to indicate behavior of the physical port. These flags are
* used in ofp_port to describe the current configuration. They are
* used in the ofp_port_mod message to configure the port's behavior.
*/
enum ofp_port_config {
OFPPC_INVALID = 0;
OFPPC_PORT_DOWN = 1; /* Port is administratively down. */
OFPPC_NO_RECV = 4; /* Drop all packets received by port. */
OFPPC_NO_FWD = 32; /* Drop packets forwarded to port. */
OFPPC_NO_PACKET_IN = 64; /* Do not send packet-in msgs for port. */
};
/* Current state of the physical port. These are not configurable from
* the controller.
*/
enum ofp_port_state {
OFPPS_INVALID = 0;
OFPPS_LINK_DOWN = 1; /* No physical link present. */
OFPPS_BLOCKED = 2; /* Port is blocked */
OFPPS_LIVE = 4; /* Live for Fast Failover Group. */
};
/* Features of ports available in a datapath. */
enum ofp_port_features {
OFPPF_INVALID = 0;
OFPPF_10MB_HD = 1; /* 10 Mb half-duplex rate support. */
OFPPF_10MB_FD = 2; /* 10 Mb full-duplex rate support. */
OFPPF_100MB_HD = 4; /* 100 Mb half-duplex rate support. */
OFPPF_100MB_FD = 8; /* 100 Mb full-duplex rate support. */
OFPPF_1GB_HD = 16; /* 1 Gb half-duplex rate support. */
OFPPF_1GB_FD = 32; /* 1 Gb full-duplex rate support. */
OFPPF_10GB_FD = 64; /* 10 Gb full-duplex rate support. */
OFPPF_40GB_FD = 128; /* 40 Gb full-duplex rate support. */
OFPPF_100GB_FD = 256; /* 100 Gb full-duplex rate support. */
OFPPF_1TB_FD = 512; /* 1 Tb full-duplex rate support. */
OFPPF_OTHER = 1024; /* Other rate, not in the list. */
OFPPF_COPPER = 2048; /* Copper medium. */
OFPPF_FIBER = 4096; /* Fiber medium. */
OFPPF_AUTONEG = 8192; /* Auto-negotiation. */
OFPPF_PAUSE = 16384; /* Pause. */
OFPPF_PAUSE_ASYM = 32768; /* Asymmetric pause. */
};
/* Description of a port */
message ofp_port {
uint32 port_no = 1;
repeated uint32 hw_addr = 2; // [OFP_ETH_ALEN];
string name = 3; /* Null-terminated */
uint32 config = 4; /* Bitmap of OFPPC_* flags. */
uint32 state = 5; /* Bitmap of OFPPS_* flags. */
/* Bitmaps of OFPPF_* that describe features. All bits zeroed if
* unsupported or unavailable. */
uint32 curr = 6; /* Current features. */
uint32 advertised = 7; /* Features being advertised by the port. */
uint32 supported = 8; /* Features supported by the port. */
uint32 peer = 9; /* Features advertised by peer. */
uint32 curr_speed = 10; /* Current port bitrate in kbps. */
uint32 max_speed = 11; /* Max port bitrate in kbps */
};
/* Switch features. */
message ofp_switch_features {
//ofp_header header;
uint64 datapath_id = 1; /* Datapath unique ID. The lower 48-bits are for
a MAC address, while the upper 16-bits are
implementer-defined. */
uint32 n_buffers = 2; /* Max packets buffered at once. */
uint32 n_tables = 3; /* Number of tables supported by datapath. */
uint32 auxiliary_id = 4; /* Identify auxiliary connections */
/* Features. */
uint32 capabilities = 5; /* Bitmap of support "ofp_capabilities". */
};
/* What changed about the physical port */
enum ofp_port_reason {
OFPPR_ADD = 0; /* The port was added. */
OFPPR_DELETE = 1; /* The port was removed. */
OFPPR_MODIFY = 2; /* Some attribute of the port has changed. */
};
/* A physical port has changed in the datapath */
message ofp_port_status {
//ofp_header header;
ofp_port_reason reason = 1; /* One of OFPPR_*. */
ofp_port desc = 2;
};
/* Modify behavior of the physical port */
message ofp_port_mod {
//ofp_header header;
uint32 port_no = 1;
repeated uint32 hw_addr = 2; //[OFP_ETH_ALEN];
/* The hardware address is not
configurable. This is used to
sanity-check the request, so it must
be the same as returned in an
ofp_port struct. */
uint32 config = 3; /* Bitmap of OFPPC_* flags. */
uint32 mask = 4; /* Bitmap of OFPPC_* flags to be changed. */
uint32 advertise = 5; /* Bitmap of OFPPF_*. Zero all bits to prevent
any action taking place. */
};
/* ## -------------------------- ## */
/* ## OpenFlow Extensible Match. ## */
/* ## -------------------------- ## */
/* The match type indicates the match structure (set of fields that compose the
* match) in use. The match type is placed in the type field at the beginning
* of all match structures. The "OpenFlow Extensible Match" type corresponds
* to OXM TLV format described below and must be supported by all OpenFlow
* switches. Extensions that define other match types may be published on the
* ONF wiki. Support for extensions is optional.
*/
enum ofp_match_type {
OFPMT_STANDARD = 0; /* Deprecated. */
OFPMT_OXM = 1; /* OpenFlow Extensible Match */
};
/* Fields to match against flows */
message ofp_match {
ofp_match_type type = 1; /* One of OFPMT_* */
repeated ofp_oxm_field oxm_fields = 2; /* 0 or more */
};
/* Components of a OXM TLV header.
* Those macros are not valid for the experimenter class, macros for the
* experimenter class will depend on the experimenter header used. */
//#define OXM_HEADER__(CLASS, FIELD, HASMASK, LENGTH) \
// (((CLASS) << 16) | ((FIELD) << 9) | ((HASMASK) << 8) | (LENGTH))
//#define OXM_HEADER(CLASS, FIELD, LENGTH) \
// OXM_HEADER__(CLASS, FIELD, 0, LENGTH)
//#define OXM_HEADER_W(CLASS, FIELD, LENGTH) \
// OXM_HEADER__(CLASS, FIELD, 1, (LENGTH) * 2)
//#define OXM_CLASS(HEADER) ((HEADER) >> 16)
//#define OXM_FIELD(HEADER) (((HEADER) >> 9) & 0x7f)
//#define OXM_TYPE(HEADER) (((HEADER) >> 9) & 0x7fffff)
//#define OXM_HASMASK(HEADER) (((HEADER) >> 8) & 1)
//#define OXM_LENGTH(HEADER) ((HEADER) & 0xff)
//
//#define OXM_MAKE_WILD_HEADER(HEADER) \
// OXM_HEADER_W(OXM_CLASS(HEADER), OXM_FIELD(HEADER), OXM_LENGTH(HEADER))
/* OXM Class IDs.
* The high order bit differentiate reserved classes from member classes.
* Classes 0x0000 to 0x7FFF are member classes, allocated by ONF.
* Classes 0x8000 to 0xFFFE are reserved classes, reserved for standardisation.
*/
enum ofp_oxm_class {
OFPXMC_NXM_0 = 0x0000; /* Backward compatibility with NXM */
OFPXMC_NXM_1 = 0x0001; /* Backward compatibility with NXM */
OFPXMC_OPENFLOW_BASIC = 0x8000; /* Basic class for OpenFlow */
OFPXMC_EXPERIMENTER = 0xFFFF; /* Experimenter class */
};
/* OXM Flow field types for OpenFlow basic class. */
enum oxm_ofb_field_types {
OFPXMT_OFB_IN_PORT = 0; /* Switch input port. */
OFPXMT_OFB_IN_PHY_PORT = 1; /* Switch physical input port. */
OFPXMT_OFB_METADATA = 2; /* Metadata passed between tables. */
OFPXMT_OFB_ETH_DST = 3; /* Ethernet destination address. */
OFPXMT_OFB_ETH_SRC = 4; /* Ethernet source address. */
OFPXMT_OFB_ETH_TYPE = 5; /* Ethernet frame type. */
OFPXMT_OFB_VLAN_VID = 6; /* VLAN id. */
OFPXMT_OFB_VLAN_PCP = 7; /* VLAN priority. */
OFPXMT_OFB_IP_DSCP = 8; /* IP DSCP (6 bits in ToS field). */
OFPXMT_OFB_IP_ECN = 9; /* IP ECN (2 bits in ToS field). */
OFPXMT_OFB_IP_PROTO = 10; /* IP protocol. */
OFPXMT_OFB_IPV4_SRC = 11; /* IPv4 source address. */
OFPXMT_OFB_IPV4_DST = 12; /* IPv4 destination address. */
OFPXMT_OFB_TCP_SRC = 13; /* TCP source port. */
OFPXMT_OFB_TCP_DST = 14; /* TCP destination port. */
OFPXMT_OFB_UDP_SRC = 15; /* UDP source port. */
OFPXMT_OFB_UDP_DST = 16; /* UDP destination port. */
OFPXMT_OFB_SCTP_SRC = 17; /* SCTP source port. */
OFPXMT_OFB_SCTP_DST = 18; /* SCTP destination port. */
OFPXMT_OFB_ICMPV4_TYPE = 19; /* ICMP type. */
OFPXMT_OFB_ICMPV4_CODE = 20; /* ICMP code. */
OFPXMT_OFB_ARP_OP = 21; /* ARP opcode. */
OFPXMT_OFB_ARP_SPA = 22; /* ARP source IPv4 address. */
OFPXMT_OFB_ARP_TPA = 23; /* ARP target IPv4 address. */
OFPXMT_OFB_ARP_SHA = 24; /* ARP source hardware address. */
OFPXMT_OFB_ARP_THA = 25; /* ARP target hardware address. */
OFPXMT_OFB_IPV6_SRC = 26; /* IPv6 source address. */
OFPXMT_OFB_IPV6_DST = 27; /* IPv6 destination address. */
OFPXMT_OFB_IPV6_FLABEL = 28; /* IPv6 Flow Label */
OFPXMT_OFB_ICMPV6_TYPE = 29; /* ICMPv6 type. */
OFPXMT_OFB_ICMPV6_CODE = 30; /* ICMPv6 code. */
OFPXMT_OFB_IPV6_ND_TARGET = 31; /* Target address for ND. */
OFPXMT_OFB_IPV6_ND_SLL = 32; /* Source link-layer for ND. */
OFPXMT_OFB_IPV6_ND_TLL = 33; /* Target link-layer for ND. */
OFPXMT_OFB_MPLS_LABEL = 34; /* MPLS label. */
OFPXMT_OFB_MPLS_TC = 35; /* MPLS TC. */
OFPXMT_OFB_MPLS_BOS = 36; /* MPLS BoS bit. */
OFPXMT_OFB_PBB_ISID = 37; /* PBB I-SID. */
OFPXMT_OFB_TUNNEL_ID = 38; /* Logical Port Metadata. */
OFPXMT_OFB_IPV6_EXTHDR = 39; /* IPv6 Extension Header pseudo-field */
};
/* OXM Flow match fields */
message ofp_oxm_field {
ofp_oxm_class oxm_class = 1;
oneof field {
/* 2 and 3 reserved for NXM_0 and NXM-1 OXM classes */
ofp_oxm_ofb_field ofb_field = 4;
ofp_oxm_experimenter_field experimenter_field = 5;
}
}
/* OXM OpenFlow Basic Match Field */
message ofp_oxm_ofb_field {
oxm_ofb_field_types type = 1;
bool has_mask = 2;
oneof value {
/* OpenFlow port on which the packet was received.
* May be a physical port, a logical port, or the reserved port OFPP_LOCAL
*
* Prereqs: None.
*
* Format: 32-bit integer in network byte order.
*
* Masking: Not maskable. */
//#define OXM_OF_IN_PORT OXM_HEADER (0x8000, OFPXMT_OFB_IN_PORT, 4)
uint32 port = 3; /* Used for OFPXMT_OFB_IN_PORT */
/* Physical port on which the packet was received.
*
* Consider a packet received on a tunnel interface defined over a link
* aggregation group (LAG) with two physical port members. If the tunnel
* interface is the logical port bound to OpenFlow. In this case,
* OFPXMT_OF_IN_PORT is the tunnel's port number and OFPXMT_OF_IN_PHY_PORT is
* the physical port number of the LAG on which the tunnel is configured.
*
* When a packet is received directly on a physical port and not processed by a
* logical port, OFPXMT_OF_IN_PORT and OFPXMT_OF_IN_PHY_PORT have the same
* value.
*
* This field is usually not available in a regular match and only available
* in ofp_packet_in messages when it's different from OXM_OF_IN_PORT.
*
* Prereqs: OXM_OF_IN_PORT must be present.
*
* Format: 32-bit integer in network byte order.
*
* Masking: Not maskable. */
//#define OXM_OF_IN_PHY_PORT OXM_HEADER (0x8000, OFPXMT_OFB_IN_PHY_PORT, 4)
uint32 physical_port = 4; /* Used for OFPXMT_OF_IN_PHY_PORT */
/* Table metadata.
*
* Prereqs: None.
*
* Format: 64-bit integer in network byte order.
*
* Masking: Arbitrary masks.
*/
//#define OXM_OF_METADATA OXM_HEADER (0x8000, OFPXMT_OFB_METADATA, 8)
//#define OXM_OF_METADATA_W OXM_HEADER_W(0x8000, OFPXMT_OFB_METADATA, 8)
uint64 table_metadata = 5; /* Used for OFPXMT_OFB_METADATA */
/* Source or destination address in Ethernet header.
*
* Prereqs: None.
*
* Format: 48-bit Ethernet MAC address.
*
* Masking: Arbitrary masks. */
//#define OXM_OF_ETH_DST OXM_HEADER (0x8000, OFPXMT_OFB_ETH_DST, 6)
//#define OXM_OF_ETH_DST_W OXM_HEADER_W(0x8000, OFPXMT_OFB_ETH_DST, 6)
//#define OXM_OF_ETH_SRC OXM_HEADER (0x8000, OFPXMT_OFB_ETH_SRC, 6)
//#define OXM_OF_ETH_SRC_W OXM_HEADER_W(0x8000, OFPXMT_OFB_ETH_SRC, 6)
bytes eth_dst = 6; /* Used for OFPXMT_OFB_ETH_DST (exactly 6 bytes) */
bytes eth_src = 7; /* Used for OFPXMT_OFB_ETH_SRC (exactly 6 bytes) */
/* Packet's Ethernet type.
*
* Prereqs: None.
*
* Format: 16-bit integer in network byte order.
*
* Masking: Not maskable. */
//#define OXM_OF_ETH_TYPE OXM_HEADER (0x8000, OFPXMT_OFB_ETH_TYPE,2)
uint32 eth_type = 8; /* Used for OFPXMT_OFB_ETH_TYPE */
/* 802.1Q VID.
*
* For a packet with an 802.1Q header, this is the VLAN-ID (VID) from the
* outermost tag, with the CFI bit forced to 1. For a packet with no 802.1Q
* header, this has value OFPVID_NONE.
*
* Prereqs: None.
*
* Format: 16-bit integer in network byte order with bit 13 indicating
* presence of VLAN header and 3 most-significant bits forced to 0.
* Only the lower 13 bits have meaning.
*
* Masking: Arbitrary masks.
*
* This field can be used in various ways:
*
* - If it is not constrained at all, the nx_match matches packets without
* an 802.1Q header or with an 802.1Q header that has any VID value.
*
* - Testing for an exact match with 0x0 matches only packets without
* an 802.1Q header.
*
* - Testing for an exact match with a VID value with CFI=1 matches packets
* that have an 802.1Q header with a specified VID.
*
* - Testing for an exact match with a nonzero VID value with CFI=0 does
* not make sense. The switch may reject this combination.
*
* - Testing with nxm_value=0, nxm_mask=0x0fff matches packets with no 802.1Q
* header or with an 802.1Q header with a VID of 0.
*
* - Testing with nxm_value=0x1000, nxm_mask=0x1000 matches packets with
* an 802.1Q header that has any VID value.
*/
//#define OXM_OF_VLAN_VID OXM_HEADER (0x8000, OFPXMT_OFB_VLAN_VID, 2)
//#define OXM_OF_VLAN_VID_W OXM_HEADER_W(0x8000, OFPXMT_OFB_VLAN_VID, 2)
uint32 vlan_vid = 9; /* Used for OFPXMT_OFB_VLAN_VID */
/* 802.1Q PCP.
*
* For a packet with an 802.1Q header, this is the VLAN-PCP from the
* outermost tag. For a packet with no 802.1Q header, this has value
* 0.
*
* Prereqs: OXM_OF_VLAN_VID must be different from OFPVID_NONE.
*
* Format: 8-bit integer with 5 most-significant bits forced to 0.
* Only the lower 3 bits have meaning.
*
* Masking: Not maskable.
*/
//#define OXM_OF_VLAN_PCP OXM_HEADER (0x8000, OFPXMT_OFB_VLAN_PCP, 1)
uint32 vlan_pcp = 10; /* Used for OFPXMT_OFB_VLAN_PCP */
/* The Diff Serv Code Point (DSCP) bits of the IP header.
* Part of the IPv4 ToS field or the IPv6 Traffic Class field.
*
* Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
*
* Format: 8-bit integer with 2 most-significant bits forced to 0.
* Only the lower 6 bits have meaning.
*
* Masking: Not maskable. */
//#define OXM_OF_IP_DSCP OXM_HEADER (0x8000, OFPXMT_OFB_IP_DSCP, 1)
uint32 ip_dscp = 11; /* Used for OFPXMT_OFB_IP_DSCP */
/* The ECN bits of the IP header.
* Part of the IPv4 ToS field or the IPv6 Traffic Class field.
*
* Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
*
* Format: 8-bit integer with 6 most-significant bits forced to 0.
* Only the lower 2 bits have meaning.
*
* Masking: Not maskable. */
//#define OXM_OF_IP_ECN OXM_HEADER (0x8000, OFPXMT_OFB_IP_ECN, 1)
uint32 ip_ecn = 12; /* Used for OFPXMT_OFB_IP_ECN */
/* The "protocol" byte in the IP header.
*
* Prereqs: OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
*
* Format: 8-bit integer.
*
* Masking: Not maskable. */
//#define OXM_OF_IP_PROTO OXM_HEADER (0x8000, OFPXMT_OFB_IP_PROTO, 1)
uint32 ip_proto = 13; /* Used for OFPXMT_OFB_IP_PROTO */
/* The source or destination address in the IP header.
*
* Prereqs: OXM_OF_ETH_TYPE must match 0x0800 exactly.
*
* Format: 32-bit integer in network byte order.
*
* Masking: Arbitrary masks.
*/
//#define OXM_OF_IPV4_SRC OXM_HEADER (0x8000, OFPXMT_OFB_IPV4_SRC, 4)
//#define OXM_OF_IPV4_SRC_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV4_SRC, 4)
//#define OXM_OF_IPV4_DST OXM_HEADER (0x8000, OFPXMT_OFB_IPV4_DST, 4)
//#define OXM_OF_IPV4_DST_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV4_DST, 4)
uint32 ipv4_src = 14; /* Used for OFPXMT_OFB_IPV4_SRC */
uint32 ipv4_dst = 15; /* Used for OFPXMT_OFB_IPV4_DST */
/* The source or destination port in the TCP header.
*
* Prereqs:
* OXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
* OXM_OF_IP_PROTO must match 6 exactly.
*
* Format: 16-bit integer in network byte order.
*
* Masking: Not maskable. */
//#define OXM_OF_TCP_SRC OXM_HEADER (0x8000, OFPXMT_OFB_TCP_SRC, 2)
//#define OXM_OF_TCP_DST OXM_HEADER (0x8000, OFPXMT_OFB_TCP_DST, 2)
uint32 tcp_src = 16; /* Used for OFPXMT_OFB_TCP_SRC */
uint32 tcp_dst = 17; /* Used for OFPXMT_OFB_TCP_DST */
/* The source or destination port in the UDP header.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match either 0x0800 or 0x86dd.
* OXM_OF_IP_PROTO must match 17 exactly.
*
* Format: 16-bit integer in network byte order.
*
* Masking: Not maskable. */
//#define OXM_OF_UDP_SRC OXM_HEADER (0x8000, OFPXMT_OFB_UDP_SRC, 2)
//#define OXM_OF_UDP_DST OXM_HEADER (0x8000, OFPXMT_OFB_UDP_DST, 2)
uint32 udp_src = 18; /* Used for OFPXMT_OFB_UDP_SRC */
uint32 udp_dst = 19; /* Used for OFPXMT_OFB_UDP_DST */
/* The source or destination port in the SCTP header.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match either 0x0800 or 0x86dd.
* OXM_OF_IP_PROTO must match 132 exactly.
*
* Format: 16-bit integer in network byte order.
*
* Masking: Not maskable. */
//#define OXM_OF_SCTP_SRC OXM_HEADER (0x8000, OFPXMT_OFB_SCTP_SRC, 2)
//#define OXM_OF_SCTP_DST OXM_HEADER (0x8000, OFPXMT_OFB_SCTP_DST, 2)
uint32 sctp_src = 20; /* Used for OFPXMT_OFB_SCTP_SRC */
uint32 sctp_dst = 21; /* Used for OFPXMT_OFB_SCTP_DST */
/* The type or code in the ICMP header.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x0800 exactly.
* OXM_OF_IP_PROTO must match 1 exactly.
*
* Format: 8-bit integer.
*
* Masking: Not maskable. */
//#define OXM_OF_ICMPV4_TYPE OXM_HEADER (0x8000, OFPXMT_OFB_ICMPV4_TYPE, 1)
//#define OXM_OF_ICMPV4_CODE OXM_HEADER (0x8000, OFPXMT_OFB_ICMPV4_CODE, 1)
uint32 icmpv4_type = 22; /* Used for OFPXMT_OFB_ICMPV4_TYPE */
uint32 icmpv4_code = 23; /* Used for OFPXMT_OFB_ICMPV4_CODE */
/* ARP opcode.
*
* For an Ethernet+IP ARP packet, the opcode in the ARP header. Always 0
* otherwise.
*
* Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly.
*
* Format: 16-bit integer in network byte order.
*
* Masking: Not maskable. */
//#define OXM_OF_ARP_OP OXM_HEADER (0x8000, OFPXMT_OFB_ARP_OP, 2)
uint32 arp_op = 24; /* Used for OFPXMT_OFB_ARP_OP */
/* For an Ethernet+IP ARP packet, the source or target protocol address
* in the ARP header. Always 0 otherwise.
*
* Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly.
*
* Format: 32-bit integer in network byte order.
*
* Masking: Arbitrary masks.
*/
//#define OXM_OF_ARP_SPA OXM_HEADER (0x8000, OFPXMT_OFB_ARP_SPA, 4)
//#define OXM_OF_ARP_SPA_W OXM_HEADER_W(0x8000, OFPXMT_OFB_ARP_SPA, 4)
//#define OXM_OF_ARP_TPA OXM_HEADER (0x8000, OFPXMT_OFB_ARP_TPA, 4)
//#define OXM_OF_ARP_TPA_W OXM_HEADER_W(0x8000, OFPXMT_OFB_ARP_TPA, 4)
uint32 arp_spa = 25; /* For OFPXMT_OFB_ARP_SPA */
uint32 arp_tpa = 26; /* For OFPXMT_OFB_ARP_TPA */
/* For an Ethernet+IP ARP packet, the source or target hardware address
* in the ARP header. Always 0 otherwise.
*
* Prereqs: OXM_OF_ETH_TYPE must match 0x0806 exactly.
*
* Format: 48-bit Ethernet MAC address.
*
* Masking: Not maskable. */
//#define OXM_OF_ARP_SHA OXM_HEADER (0x8000, OFPXMT_OFB_ARP_SHA, 6)
//#define OXM_OF_ARP_SHA_W OXM_HEADER_W (0x8000, OFPXMT_OFB_ARP_SHA, 6)
//#define OXM_OF_ARP_THA OXM_HEADER (0x8000, OFPXMT_OFB_ARP_THA, 6)
//#define OXM_OF_ARP_THA_W OXM_HEADER_W (0x8000, OFPXMT_OFB_ARP_THA, 6)
bytes arp_sha = 27; /* For OFPXMT_OFB_ARP_SHA (6 bytes) */
bytes arp_tha = 28; /* For OFPXMT_OFB_ARP_THA (6 bytes) */
/* The source or destination address in the IPv6 header.
*
* Prereqs: OXM_OF_ETH_TYPE must match 0x86dd exactly.
*
* Format: 128-bit IPv6 address.
*
* Masking: Arbitrary masks.
*/
//#define OXM_OF_IPV6_SRC OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_SRC, 16)
//#define OXM_OF_IPV6_SRC_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_SRC, 16)
//#define OXM_OF_IPV6_DST OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_DST, 16)
//#define OXM_OF_IPV6_DST_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_DST, 16)
bytes ipv6_src = 29; /* For OFPXMT_OFB_IPV6_SRC */
bytes ipv6_dst = 30; /* For OFPXMT_OFB_IPV6_DST */
/* The IPv6 Flow Label
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x86dd exactly
*
* Format: 32-bit integer with 12 most-significant bits forced to 0.
* Only the lower 20 bits have meaning.
*
* Masking: Arbitrary masks.
*/
//#define OXM_OF_IPV6_FLABEL OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_FLABEL, 4)
//#define OXM_OF_IPV6_FLABEL_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_FLABEL, 4)
uint32 ipv6_flabel = 31; /* For OFPXMT_OFB_IPV6_FLABEL */
/* The type or code in the ICMPv6 header.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x86dd exactly.
* OXM_OF_IP_PROTO must match 58 exactly.
*
* Format: 8-bit integer.
*
* Masking: Not maskable. */
//#define OXM_OF_ICMPV6_TYPE OXM_HEADER (0x8000, OFPXMT_OFB_ICMPV6_TYPE, 1)
//#define OXM_OF_ICMPV6_CODE OXM_HEADER (0x8000, OFPXMT_OFB_ICMPV6_CODE, 1)
uint32 icmpv6_type = 32; /* For OFPXMT_OFB_ICMPV6_TYPE */
uint32 icmpv6_code = 33; /* For OFPXMT_OFB_ICMPV6_CODE */
/* The target address in an IPv6 Neighbor Discovery message.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x86dd exactly.
* OXM_OF_IP_PROTO must match 58 exactly.
* OXM_OF_ICMPV6_TYPE must be either 135 or 136.
*
* Format: 128-bit IPv6 address.
*
* Masking: Not maskable. */
//#define OXM_OF_IPV6_ND_TARGET OXM_HEADER \
// (0x8000, OFPXMT_OFB_IPV6_ND_TARGET, 16)
bytes ipv6_nd_target = 34; /* For OFPXMT_OFB_IPV6_ND_TARGET */
/* The source link-layer address option in an IPv6 Neighbor Discovery
* message.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x86dd exactly.
* OXM_OF_IP_PROTO must match 58 exactly.
* OXM_OF_ICMPV6_TYPE must be exactly 135.
*
* Format: 48-bit Ethernet MAC address.
*
* Masking: Not maskable. */
//#define OXM_OF_IPV6_ND_SLL OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_ND_SLL, 6)
bytes ipv6_nd_ssl = 35; /* For OFPXMT_OFB_IPV6_ND_SLL */
/* The target link-layer address option in an IPv6 Neighbor Discovery
* message.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x86dd exactly.
* OXM_OF_IP_PROTO must match 58 exactly.
* OXM_OF_ICMPV6_TYPE must be exactly 136.
*
* Format: 48-bit Ethernet MAC address.
*
* Masking: Not maskable. */
//#define OXM_OF_IPV6_ND_TLL OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_ND_TLL, 6)
bytes ipv6_nd_tll = 36; /* For OFPXMT_OFB_IPV6_ND_TLL */
/* The LABEL in the first MPLS shim header.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly.
*
* Format: 32-bit integer in network byte order with 12 most-significant
* bits forced to 0. Only the lower 20 bits have meaning.
*
* Masking: Not maskable. */
//#define OXM_OF_MPLS_LABEL OXM_HEADER (0x8000, OFPXMT_OFB_MPLS_LABEL, 4)
uint32 mpls_label = 37; /* For OFPXMT_OFB_MPLS_LABEL */
/* The TC in the first MPLS shim header.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly.
*
* Format: 8-bit integer with 5 most-significant bits forced to 0.
* Only the lower 3 bits have meaning.
*
* Masking: Not maskable. */
//#define OXM_OF_MPLS_TC OXM_HEADER (0x8000, OFPXMT_OFB_MPLS_TC, 1)
uint32 mpls_tc = 38; /* For OFPXMT_OFB_MPLS_TC */
/* The BoS bit in the first MPLS shim header.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x8847 or 0x8848 exactly.
*
* Format: 8-bit integer with 7 most-significant bits forced to 0.
* Only the lowest bit have a meaning.
*
* Masking: Not maskable. */
//#define OXM_OF_MPLS_BOS OXM_HEADER (0x8000, OFPXMT_OFB_MPLS_BOS, 1)
uint32 mpls_bos = 39; /* For OFPXMT_OFB_MPLS_BOS */
/* IEEE 802.1ah I-SID.
*
* For a packet with a PBB header, this is the I-SID from the
* outermost service tag.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x88E7 exactly.
*
* Format: 24-bit integer in network byte order.
*
* Masking: Arbitrary masks. */
//#define OXM_OF_PBB_ISID OXM_HEADER (0x8000, OFPXMT_OFB_PBB_ISID, 3)
//#define OXM_OF_PBB_ISID_W OXM_HEADER_W(0x8000, OFPXMT_OFB_PBB_ISID, 3)
uint32 pbb_isid = 40; /* For OFPXMT_OFB_PBB_ISID */
/* Logical Port Metadata.
*
* Metadata associated with a logical port.
* If the logical port performs encapsulation and decapsulation, this
* is the demultiplexing field from the encapsulation header.
* For example, for a packet received via GRE tunnel including a (32-bit) key,
* the key is stored in the low 32-bits and the high bits are zeroed.
* For a MPLS logical port, the low 20 bits represent the MPLS Label.
* For a VxLAN logical port, the low 24 bits represent the VNI.
* If the packet is not received through a logical port, the value is 0.
*
* Prereqs: None.
*
* Format: 64-bit integer in network byte order.
*
* Masking: Arbitrary masks. */
//#define OXM_OF_TUNNEL_ID OXM_HEADER (0x8000, OFPXMT_OFB_TUNNEL_ID, 8)
//#define OXM_OF_TUNNEL_ID_W OXM_HEADER_W(0x8000, OFPXMT_OFB_TUNNEL_ID, 8)
uint64 tunnel_id = 41; /* For OFPXMT_OFB_TUNNEL_ID */
/* The IPv6 Extension Header pseudo-field.
*
* Prereqs:
* OXM_OF_ETH_TYPE must match 0x86dd exactly
*
* Format: 16-bit integer with 7 most-significant bits forced to 0.
* Only the lower 9 bits have meaning.
*
* Masking: Maskable. */
//#define OXM_OF_IPV6_EXTHDR OXM_HEADER (0x8000, OFPXMT_OFB_IPV6_EXTHDR, 2)
//#define OXM_OF_IPV6_EXTHDR_W OXM_HEADER_W(0x8000, OFPXMT_OFB_IPV6_EXTHDR, 2)
uint32 ipv6_exthdr = 42; /* For OFPXMT_OFB_IPV6_EXTHDR */
}
/* Optional mask values (must be present when has_mask is true */
oneof mask {
uint64 table_metadata_mask = 105; /* For OFPXMT_OFB_METADATA */
bytes eth_dst_mask = 106; /* For OFPXMT_OFB_ETH_DST (exactly 6 bytes)*/
bytes eth_src_mask = 107; /* For OFPXMT_OFB_ETH_SRC (exactly 6 bytes)*/
uint32 vlan_vid_mask = 109; /* For OFPXMT_OFB_VLAN_VID */
uint32 ipv4_src_mask = 114; /* For OFPXMT_OFB_IPV4_SRC */
uint32 ipv4_dst_mask = 115; /* For OFPXMT_OFB_IPV4_DST */
uint32 arp_spa_mask = 125; /* For OFPXMT_OFB_ARP_SPA */
uint32 arp_tpa_mask = 126; /* For OFPXMT_OFB_ARP_TPA */
bytes ipv6_src_mask = 129; /* For OFPXMT_OFB_IPV6_SRC */
bytes ipv6_dst_mask = 130; /* For OFPXMT_OFB_IPV6_DST */
uint32 ipv6_flabel_mask = 131; /* For OFPXMT_OFB_IPV6_FLABEL */
uint32 pbb_isid_mask = 140; /* For OFPXMT_OFB_PBB_ISID */
uint64 tunnel_id_mask = 141; /* For OFPXMT_OFB_TUNNEL_ID */
uint32 ipv6_exthdr_mask = 142; /* For OFPXMT_OFB_IPV6_EXTHDR */
}
}
//#define OFPXMT_OFB_ALL ((UINT64_C(1) << 40) - 1)
/* The VLAN id is 12-bits, so we can use the entire 16 bits to indicate
* special conditions.
*/
enum ofp_vlan_id {
OFPVID_NONE = 0x0000; /* No VLAN id was set. */
OFPVID_PRESENT = 0x1000; /* Bit that indicate that a VLAN id is set */
};
/* Define for compatibility */
//#define OFP_VLAN_NONE OFPVID_NONE
/* Bit definitions for IPv6 Extension Header pseudo-field. */
enum ofp_ipv6exthdr_flags {
OFPIEH_INVALID = 0;
OFPIEH_NONEXT = 1; /* "No next header" encountered. */
OFPIEH_ESP = 2; /* Encrypted Sec Payload header present. */
OFPIEH_AUTH = 4; /* Authentication header present. */
OFPIEH_DEST = 8; /* 1 or 2 dest headers present. */
OFPIEH_FRAG = 16; /* Fragment header present. */
OFPIEH_ROUTER = 32; /* Router header present. */
OFPIEH_HOP = 64; /* Hop-by-hop header present. */
OFPIEH_UNREP = 128; /* Unexpected repeats encountered. */
OFPIEH_UNSEQ = 256; /* Unexpected sequencing encountered. */
};
/* Header for OXM experimenter match fields.
* The experimenter class should not use OXM_HEADER() macros for defining
* fields due to this extra header. */
message ofp_oxm_experimenter_field {
uint32 oxm_header = 1; /* oxm_class = OFPXMC_EXPERIMENTER */
uint32 experimenter = 2; /* Experimenter ID which takes the same
form as in struct ofp_experimenter_header. */
};
/* ## ----------------- ## */
/* ## OpenFlow Actions. ## */
/* ## ----------------- ## */
enum ofp_action_type {
OFPAT_OUTPUT = 0; /* Output to switch port. */
OFPAT_COPY_TTL_OUT = 11; /* Copy TTL "outwards" -- from next-to-outermost
to outermost */
OFPAT_COPY_TTL_IN = 12; /* Copy TTL "inwards" -- from outermost to
next-to-outermost */
OFPAT_SET_MPLS_TTL = 15; /* MPLS TTL */
OFPAT_DEC_MPLS_TTL = 16; /* Decrement MPLS TTL */
OFPAT_PUSH_VLAN = 17; /* Push a new VLAN tag */
OFPAT_POP_VLAN = 18; /* Pop the outer VLAN tag */
OFPAT_PUSH_MPLS = 19; /* Push a new MPLS tag */
OFPAT_POP_MPLS = 20; /* Pop the outer MPLS tag */
OFPAT_SET_QUEUE = 21; /* Set queue id when outputting to a port */
OFPAT_GROUP = 22; /* Apply group. */
OFPAT_SET_NW_TTL = 23; /* IP TTL. */
OFPAT_DEC_NW_TTL = 24; /* Decrement IP TTL. */
OFPAT_SET_FIELD = 25; /* Set a header field using OXM TLV format. */
OFPAT_PUSH_PBB = 26; /* Push a new PBB service tag (I-TAG) */
OFPAT_POP_PBB = 27; /* Pop the outer PBB service tag (I-TAG) */
OFPAT_EXPERIMENTER = 0xffff;
};
/* Action header that is common to all actions. The length includes the
* header and any padding used to make the action 64-bit aligned.
* NB: The length of an action *must* always be a multiple of eight. */
message ofp_action {
ofp_action_type type = 1; /* One of OFPAT_*. */
oneof action {
ofp_action_output output = 2;
ofp_action_mpls_ttl mpls_ttl = 3;
ofp_action_push push = 4;
ofp_action_pop_mpls pop_mpls = 5;
ofp_action_group group = 6;
ofp_action_nw_ttl nw_ttl = 7;
ofp_action_set_field set_field = 8;
ofp_action_experimenter experimenter = 9;
}
};
enum ofp_controller_max_len {
OFPCML_INVALID = 0;
OFPCML_MAX = 0xffe5; /* maximum max_len value which can be used
to request a specific byte length. */
OFPCML_NO_BUFFER = 0xffff; /* indicates that no buffering should be
applied and the whole packet is to be
sent to the controller. */
};
/* Action structure for OFPAT_OUTPUT, which sends packets out 'port'.
* When the 'port' is the OFPP_CONTROLLER, 'max_len' indicates the max
* number of bytes to send. A 'max_len' of zero means no bytes of the
* packet should be sent. A 'max_len' of OFPCML_NO_BUFFER means that
* the packet is not buffered and the complete packet is to be sent to
* the controller. */
message ofp_action_output {
uint32 port = 1; /* Output port. */
uint32 max_len = 2; /* Max length to send to controller. */
};
/* Action structure for OFPAT_SET_MPLS_TTL. */
message ofp_action_mpls_ttl {
uint32 mpls_ttl = 1; /* MPLS TTL */
};
/* Action structure for OFPAT_PUSH_VLAN/MPLS/PBB. */
message ofp_action_push {
uint32 ethertype = 1; /* Ethertype */
};
/* Action structure for OFPAT_POP_MPLS. */
message ofp_action_pop_mpls {
uint32 ethertype = 1; /* Ethertype */
};
/* Action structure for OFPAT_GROUP. */
message ofp_action_group {
uint32 group_id = 1; /* Group identifier. */
};
/* Action structure for OFPAT_SET_NW_TTL. */
message ofp_action_nw_ttl {
uint32 nw_ttl = 1; /* IP TTL */
};
/* Action structure for OFPAT_SET_FIELD. */
message ofp_action_set_field {
ofp_oxm_field field = 1;
};
/* Action header for OFPAT_EXPERIMENTER.
* The rest of the body is experimenter-defined. */
message ofp_action_experimenter {
uint32 experimenter = 1; /* Experimenter ID which takes the same
form as in struct
ofp_experimenter_header. */
bytes data = 2;
};
/* ## ---------------------- ## */
/* ## OpenFlow Instructions. ## */
/* ## ---------------------- ## */
enum ofp_instruction_type {
OFPIT_INVALID = 0;
OFPIT_GOTO_TABLE = 1; /* Setup the next table in the lookup
pipeline */
OFPIT_WRITE_METADATA = 2; /* Setup the metadata field for use later in
pipeline */
OFPIT_WRITE_ACTIONS = 3; /* Write the action(s) onto the datapath action
set */
OFPIT_APPLY_ACTIONS = 4; /* Applies the action(s) immediately */
OFPIT_CLEAR_ACTIONS = 5; /* Clears all actions from the datapath
action set */
OFPIT_METER = 6; /* Apply meter (rate limiter) */
OFPIT_EXPERIMENTER = 0xFFFF; /* Experimenter instruction */
};
/* Instruction header that is common to all instructions. The length includes
* the header and any padding used to make the instruction 64-bit aligned.
* NB: The length of an instruction *must* always be a multiple of eight. */
message ofp_instruction {
uint32 type = 1; /* Instruction type */
oneof data {
ofp_instruction_goto_table goto_table = 2;
ofp_instruction_write_metadata write_metadata = 3;
ofp_instruction_actions actions = 4;
ofp_instruction_meter meter = 5;
ofp_instruction_experimenter experimenter = 6;
}
};
/* Instruction structure for OFPIT_GOTO_TABLE */
message ofp_instruction_goto_table {
uint32 table_id = 1; /* Set next table in the lookup pipeline */
};
/* Instruction structure for OFPIT_WRITE_METADATA */
message ofp_instruction_write_metadata {
uint64 metadata = 1; /* Metadata value to write */
uint64 metadata_mask = 2; /* Metadata write bitmask */
};
/* Instruction structure for OFPIT_WRITE/APPLY/CLEAR_ACTIONS */
message ofp_instruction_actions {
repeated ofp_action actions = 1; /* 0 or more actions associated
with OFPIT_WRITE_ACTIONS and
OFPIT_APPLY_ACTIONS */
};
/* Instruction structure for OFPIT_METER */
message ofp_instruction_meter {
uint32 meter_id = 1; /* Meter instance. */
};
/* Instruction structure for experimental instructions */
message ofp_instruction_experimenter {
uint32 experimenter = 1; /* Experimenter ID which takes the same form
as in struct ofp_experimenter_header. */
/* Experimenter-defined arbitrary additional data. */
bytes data = 2;
};
/* ## --------------------------- ## */
/* ## OpenFlow Flow Modification. ## */
/* ## --------------------------- ## */
enum ofp_flow_mod_command {
OFPFC_ADD = 0; /* New flow. */
OFPFC_MODIFY = 1; /* Modify all matching flows. */
OFPFC_MODIFY_STRICT = 2; /* Modify entry strictly matching wildcards and
priority. */
OFPFC_DELETE = 3; /* Delete all matching flows. */
OFPFC_DELETE_STRICT = 4; /* Delete entry strictly matching wildcards and
priority. */
};
/* Value used in "idle_timeout" and "hard_timeout" to indicate that the entry
* is permanent. */
//#define OFP_FLOW_PERMANENT 0
/* By default, choose a priority in the middle. */
//#define OFP_DEFAULT_PRIORITY 0x8000
enum ofp_flow_mod_flags {
OFPFF_INVALID = 0;
OFPFF_SEND_FLOW_REM = 1; /* Send flow removed message when flow
* expires or is deleted. */
OFPFF_CHECK_OVERLAP = 2; /* Check for overlapping entries first. */
OFPFF_RESET_COUNTS = 4; /* Reset flow packet and byte counts. */
OFPFF_NO_PKT_COUNTS = 8; /* Don't keep track of packet count. */
OFPFF_NO_BYT_COUNTS = 16; /* Don't keep track of byte count. */
};
/* Flow setup and teardown (controller -> datapath). */
message ofp_flow_mod {
//ofp_header header;
uint64 cookie = 1; /* Opaque controller-issued identifier. */
uint64 cookie_mask = 2; /* Mask used to restrict the cookie bits
that must match when the command is
OFPFC_MODIFY* or OFPFC_DELETE*. A value
of 0 indicates no restriction. */
uint32 table_id = 3; /* ID of the table to put the flow in.
For OFPFC_DELETE_* commands, OFPTT_ALL
can also be used to delete matching
flows from all tables. */
ofp_flow_mod_command command = 4; /* One of OFPFC_*. */
uint32 idle_timeout = 5; /* Idle time before discarding (seconds). */
uint32 hard_timeout = 6; /* Max time before discarding (seconds). */
uint32 priority = 7; /* Priority level of flow entry. */
uint32 buffer_id = 8; /* Buffered packet to apply to, or
OFP_NO_BUFFER.
Not meaningful for OFPFC_DELETE*. */
uint32 out_port = 9; /* For OFPFC_DELETE* commands, require
matching entries to include this as an
output port. A value of OFPP_ANY
indicates no restriction. */
uint32 out_group = 10; /* For OFPFC_DELETE* commands, require
matching entries to include this as an
output group. A value of OFPG_ANY
indicates no restriction. */
uint32 flags = 11; /* Bitmap of OFPFF_* flags. */
ofp_match match = 12; /* Fields to match. Variable size. */
repeated ofp_instruction instructions = 13; /* 0 or more. */
};
/* Group numbering. Groups can use any number up to OFPG_MAX. */
enum ofp_group {
OFPG_INVALID = 0;
/* Last usable group number. */
OFPG_MAX = 0x7fffff00;
/* Fake groups. */
OFPG_ALL = 0x7ffffffc; /* Represents all groups for group delete
commands. */
OFPG_ANY = 0x7fffffff; /* Special wildcard: no group specified. */
};
/* Group commands */
enum ofp_group_mod_command {
OFPGC_ADD = 0; /* New group. */
OFPGC_MODIFY = 1; /* Modify all matching groups. */
OFPGC_DELETE = 2; /* Delete all matching groups. */
};
/* Bucket for use in groups. */
message ofp_bucket {
uint32 weight = 1; /* Relative weight of bucket. Only
defined for select groups. */
uint32 watch_port = 2; /* Port whose state affects whether this
bucket is live. Only required for fast
failover groups. */
uint32 watch_group = 3; /* Group whose state affects whether this
bucket is live. Only required for fast
failover groups. */
repeated ofp_action actions = 4;
};
/* Group setup and teardown (controller -> datapath). */
message ofp_group_mod {
//ofp_header header;
ofp_group_mod_command command = 1; /* One of OFPGC_*. */
ofp_group_type type = 2; /* One of OFPGT_*. */
uint32 group_id = 3; /* Group identifier. */
repeated ofp_bucket buckets = 4;
};
/* Group types. Values in the range [128; 255] are reserved for experimental
* use. */
enum ofp_group_type {
OFPGT_ALL = 0; /* All (multicast/broadcast) group. */
OFPGT_SELECT = 1; /* Select group. */
OFPGT_INDIRECT = 2; /* Indirect group. */
OFPGT_FF = 3; /* Fast failover group. */
};
/* Special buffer-id to indicate 'no buffer' */
//#define OFP_NO_BUFFER 0xffffffff
/* Send packet (controller -> datapath). */
message ofp_packet_out {
//ofp_header header;
uint32 buffer_id = 1; /* ID assigned by datapath (OFP_NO_BUFFER
if none). */
uint32 in_port = 2; /* Packet's input port or OFPP_CONTROLLER.*/
repeated ofp_action actions = 3; /* Action list - 0 or more. */
/* The variable size action list is optionally followed by packet data.
* This data is only present and meaningful if buffer_id == -1. */
bytes data = 4; /* Packet data. */
};
/* Why is this packet being sent to the controller? */
enum ofp_packet_in_reason {
OFPR_NO_MATCH = 0; /* No matching flow (table-miss flow entry). */
OFPR_ACTION = 1; /* Action explicitly output to controller. */
OFPR_INVALID_TTL = 2; /* Packet has invalid TTL */
};
/* Packet received on port (datapath -> controller). */
message ofp_packet_in {
//ofp_header header;
uint32 buffer_id = 1; /* ID assigned by datapath. */
ofp_packet_in_reason reason = 2; /* Reason packet is being sent */
uint32 table_id = 3; /* ID of the table that was looked up */
uint64 cookie = 4; /* Cookie of the flow entry that was looked up. */
ofp_match match = 5; /* Packet metadata. Variable size. */
bytes data = 6; /* Ethernet frame */
};
/* Why was this flow removed? */
enum ofp_flow_removed_reason {
OFPRR_IDLE_TIMEOUT = 0; /* Flow idle time exceeded idle_timeout. */
OFPRR_HARD_TIMEOUT = 1; /* Time exceeded hard_timeout. */
OFPRR_DELETE = 2; /* Evicted by a DELETE flow mod. */
OFPRR_GROUP_DELETE = 3; /* Group was removed. */
OFPRR_METER_DELETE = 4; /* Meter was removed */
};
/* Flow removed (datapath -> controller). */
message ofp_flow_removed {
//ofp_header header;
uint64 cookie = 1; /* Opaque controller-issued identifier. */
uint32 priority = 2; /* Priority level of flow entry. */
ofp_flow_removed_reason reason = 3; /* One of OFPRR_*. */
uint32 table_id = 4; /* ID of the table */
uint32 duration_sec = 5; /* Time flow was alive in seconds. */
uint32 duration_nsec = 6; /* Time flow was alive in nanoseconds beyond
duration_sec. */
uint32 idle_timeout = 7; /* Idle timeout from original flow mod. */
uint32 hard_timeout = 8; /* Hard timeout from original flow mod. */
uint64 packet_count = 9;
uint64 byte_count = 10;
ofp_match match = 121; /* Description of fields. Variable size. */
};
/* Meter numbering. Flow meters can use any number up to OFPM_MAX. */
enum ofp_meter {
OFPM_ZERO = 0;
/* Last usable meter. */
OFPM_MAX = 0x7fff0000;
/* Virtual meters. */
OFPM_SLOWPATH = 0x7ffffffd; /* Meter for slow datapath. */
OFPM_CONTROLLER = 0x7ffffffe; /* Meter for controller connection. */
OFPM_ALL = 0x7fffffff; /* Represents all meters for stat requests
commands. */
};
/* Meter band types */
enum ofp_meter_band_type {
OFPMBT_INVALID = 0;
OFPMBT_DROP = 1; /* Drop packet. */
OFPMBT_DSCP_REMARK = 2; /* Remark DSCP in the IP header. */
OFPMBT_EXPERIMENTER = 0xFFFF; /* Experimenter meter band. */
};
/* Common header for all meter bands */
message ofp_meter_band_header {
ofp_meter_band_type type = 1; /* One of OFPMBT_*. */
uint32 rate = 2; /* Rate for this band. */
uint32 burst_size = 3;/* Size of bursts. */
oneof data {
ofp_meter_band_drop drop = 4;
ofp_meter_band_dscp_remark dscp_remark = 5;
ofp_meter_band_experimenter experimenter = 6;
}
};
/* OFPMBT_DROP band - drop packets */
message ofp_meter_band_drop {
//Empty payload
};
/* OFPMBT_DSCP_REMARK band - Remark DSCP in the IP header */
message ofp_meter_band_dscp_remark {
uint32 prec_level = 1; /* Number of drop precedence level to add. */
};
/* OFPMBT_EXPERIMENTER band - Experimenter type.
* The rest of the band is experimenter-defined. */
message ofp_meter_band_experimenter {
uint32 experimenter = 1;/* Experimenter ID which takes the
same form as in struct
ofp_experimenter_header. */
};
/* Meter commands */
enum ofp_meter_mod_command {
OFPMC_ADD = 0; /* New meter. */
OFPMC_MODIFY = 1; /* Modify specified meter. */
OFPMC_DELETE = 2; /* Delete specified meter. */
};
/* Meter configuration flags */
enum ofp_meter_flags {
OFPMF_INVALID = 0;
OFPMF_KBPS = 1; /* Rate value in kb/s (kilo-bit per second). */
OFPMF_PKTPS = 2; /* Rate value in packet/sec. */
OFPMF_BURST = 4; /* Do burst size. */
OFPMF_STATS = 8; /* Collect statistics. */
};
/* Meter configuration. OFPT_METER_MOD. */
message ofp_meter_mod {
ofp_meter_mod_command command = 1; /* One of OFPMC_*. */
uint32 flags = 2; /* Bitmap of OFPMF_* flags. */
uint32 meter_id = 3; /* Meter instance. */
repeated ofp_meter_band_header bands = 4; /* The band list length is
inferred from the length field
in the header. */
};
/* Values for 'type' in ofp_error_message. These values are immutable: they
* will not change in future versions of the protocol (although new values may
* be added). */
enum ofp_error_type {
OFPET_HELLO_FAILED = 0; /* Hello protocol failed. */
OFPET_BAD_REQUEST = 1; /* Request was not understood. */
OFPET_BAD_ACTION = 2; /* Error in action description. */
OFPET_BAD_INSTRUCTION = 3; /* Error in instruction list. */
OFPET_BAD_MATCH = 4; /* Error in match. */
OFPET_FLOW_MOD_FAILED = 5; /* Problem modifying flow entry. */
OFPET_GROUP_MOD_FAILED = 6; /* Problem modifying group entry. */
OFPET_PORT_MOD_FAILED = 7; /* Port mod request failed. */
OFPET_TABLE_MOD_FAILED = 8; /* Table mod request failed. */
OFPET_QUEUE_OP_FAILED = 9; /* Queue operation failed. */
OFPET_SWITCH_CONFIG_FAILED = 10; /* Switch config request failed. */
OFPET_ROLE_REQUEST_FAILED = 11; /* Controller Role request failed. */
OFPET_METER_MOD_FAILED = 12; /* Error in meter. */
OFPET_TABLE_FEATURES_FAILED = 13; /* Setting table features failed. */
OFPET_EXPERIMENTER = 0xffff; /* Experimenter error messages. */
};
/* ofp_error_msg 'code' values for OFPET_HELLO_FAILED. 'data' contains an
* ASCII text string that may give failure details. */
enum ofp_hello_failed_code {
OFPHFC_INCOMPATIBLE = 0; /* No compatible version. */
OFPHFC_EPERM = 1; /* Permissions error. */
};
/* ofp_error_msg 'code' values for OFPET_BAD_REQUEST. 'data' contains at least
* the first 64 bytes of the failed request. */
enum ofp_bad_request_code {
OFPBRC_BAD_VERSION = 0; /* ofp_header.version not supported. */
OFPBRC_BAD_TYPE = 1; /* ofp_header.type not supported. */
OFPBRC_BAD_MULTIPART = 2; /* ofp_multipart_request.type not supported.
*/
OFPBRC_BAD_EXPERIMENTER = 3; /* Experimenter id not supported
* (in ofp_experimenter_header or
* ofp_multipart_request or
* ofp_multipart_reply). */
OFPBRC_BAD_EXP_TYPE = 4; /* Experimenter type not supported. */
OFPBRC_EPERM = 5; /* Permissions error. */
OFPBRC_BAD_LEN = 6; /* Wrong request length for type. */
OFPBRC_BUFFER_EMPTY = 7; /* Specified buffer has already been used. */
OFPBRC_BUFFER_UNKNOWN = 8; /* Specified buffer does not exist. */
OFPBRC_BAD_TABLE_ID = 9; /* Specified table-id invalid or does not
* exist. */
OFPBRC_IS_SLAVE = 10; /* Denied because controller is slave. */
OFPBRC_BAD_PORT = 11; /* Invalid port. */
OFPBRC_BAD_PACKET = 12; /* Invalid packet in packet-out. */
OFPBRC_MULTIPART_BUFFER_OVERFLOW = 13; /* ofp_multipart_request
overflowed the assigned buffer. */
};
/* ofp_error_msg 'code' values for OFPET_BAD_ACTION. 'data' contains at least
* the first 64 bytes of the failed request. */
enum ofp_bad_action_code {
OFPBAC_BAD_TYPE = 0; /* Unknown or unsupported action type. */
OFPBAC_BAD_LEN = 1; /* Length problem in actions. */
OFPBAC_BAD_EXPERIMENTER = 2; /* Unknown experimenter id specified. */
OFPBAC_BAD_EXP_TYPE = 3; /* Unknown action for experimenter id. */
OFPBAC_BAD_OUT_PORT = 4; /* Problem validating output port. */
OFPBAC_BAD_ARGUMENT = 5; /* Bad action argument. */
OFPBAC_EPERM = 6; /* Permissions error. */
OFPBAC_TOO_MANY = 7; /* Can't handle this many actions. */
OFPBAC_BAD_QUEUE = 8; /* Problem validating output queue. */
OFPBAC_BAD_OUT_GROUP = 9; /* Invalid group id in forward action. */
OFPBAC_MATCH_INCONSISTENT = 10; /* Action can't apply for this match,
or Set-Field missing prerequisite. */
OFPBAC_UNSUPPORTED_ORDER = 11; /* Action order is unsupported for the
action list in an Apply-Actions instruction */
OFPBAC_BAD_TAG = 12; /* Actions uses an unsupported
tag/encap. */
OFPBAC_BAD_SET_TYPE = 13; /* Unsupported type in SET_FIELD action. */
OFPBAC_BAD_SET_LEN = 14; /* Length problem in SET_FIELD action. */
OFPBAC_BAD_SET_ARGUMENT = 15; /* Bad argument in SET_FIELD action. */
};
/* ofp_error_msg 'code' values for OFPET_BAD_INSTRUCTION. 'data' contains at
* least the first 64 bytes of the failed request. */
enum ofp_bad_instruction_code {
OFPBIC_UNKNOWN_INST = 0; /* Unknown instruction. */
OFPBIC_UNSUP_INST = 1; /* Switch or table does not support the
instruction. */
OFPBIC_BAD_TABLE_ID = 2; /* Invalid Table-ID specified. */
OFPBIC_UNSUP_METADATA = 3; /* Metadata value unsupported by datapath. */
OFPBIC_UNSUP_METADATA_MASK = 4; /* Metadata mask value unsupported by
datapath. */
OFPBIC_BAD_EXPERIMENTER = 5; /* Unknown experimenter id specified. */
OFPBIC_BAD_EXP_TYPE = 6; /* Unknown instruction for experimenter id. */
OFPBIC_BAD_LEN = 7; /* Length problem in instructions. */
OFPBIC_EPERM = 8; /* Permissions error. */
};
/* ofp_error_msg 'code' values for OFPET_BAD_MATCH. 'data' contains at least
* the first 64 bytes of the failed request. */
enum ofp_bad_match_code {
OFPBMC_BAD_TYPE = 0; /* Unsupported match type specified by the
match */
OFPBMC_BAD_LEN = 1; /* Length problem in match. */
OFPBMC_BAD_TAG = 2; /* Match uses an unsupported tag/encap. */
OFPBMC_BAD_DL_ADDR_MASK = 3; /* Unsupported datalink addr mask - switch
does not support arbitrary datalink
address mask. */
OFPBMC_BAD_NW_ADDR_MASK = 4; /* Unsupported network addr mask - switch
does not support arbitrary network
address mask. */
OFPBMC_BAD_WILDCARDS = 5; /* Unsupported combination of fields masked
or omitted in the match. */
OFPBMC_BAD_FIELD = 6; /* Unsupported field type in the match. */
OFPBMC_BAD_VALUE = 7; /* Unsupported value in a match field. */
OFPBMC_BAD_MASK = 8; /* Unsupported mask specified in the match,
field is not dl-address or nw-address. */
OFPBMC_BAD_PREREQ = 9; /* A prerequisite was not met. */
OFPBMC_DUP_FIELD = 10; /* A field type was duplicated. */
OFPBMC_EPERM = 11; /* Permissions error. */
};
/* ofp_error_msg 'code' values for OFPET_FLOW_MOD_FAILED. 'data' contains
* at least the first 64 bytes of the failed request. */
enum ofp_flow_mod_failed_code {
OFPFMFC_UNKNOWN = 0; /* Unspecified error. */
OFPFMFC_TABLE_FULL = 1; /* Flow not added because table was full. */
OFPFMFC_BAD_TABLE_ID = 2; /* Table does not exist */
OFPFMFC_OVERLAP = 3; /* Attempted to add overlapping flow with
CHECK_OVERLAP flag set. */
OFPFMFC_EPERM = 4; /* Permissions error. */
OFPFMFC_BAD_TIMEOUT = 5; /* Flow not added because of unsupported
idle/hard timeout. */
OFPFMFC_BAD_COMMAND = 6; /* Unsupported or unknown command. */
OFPFMFC_BAD_FLAGS = 7; /* Unsupported or unknown flags. */
};
/* ofp_error_msg 'code' values for OFPET_GROUP_MOD_FAILED. 'data' contains
* at least the first 64 bytes of the failed request. */
enum ofp_group_mod_failed_code {
OFPGMFC_GROUP_EXISTS = 0; /* Group not added because a group ADD
attempted to replace an
already-present group. */
OFPGMFC_INVALID_GROUP = 1; /* Group not added because Group
specified is invalid. */
OFPGMFC_WEIGHT_UNSUPPORTED = 2; /* Switch does not support unequal load
sharing with select groups. */
OFPGMFC_OUT_OF_GROUPS = 3; /* The group table is full. */
OFPGMFC_OUT_OF_BUCKETS = 4; /* The maximum number of action buckets
for a group has been exceeded. */
OFPGMFC_CHAINING_UNSUPPORTED = 5; /* Switch does not support groups that
forward to groups. */
OFPGMFC_WATCH_UNSUPPORTED = 6; /* This group cannot watch the
watch_port or watch_group specified.
*/
OFPGMFC_LOOP = 7; /* Group entry would cause a loop. */
OFPGMFC_UNKNOWN_GROUP = 8; /* Group not modified because a group
MODIFY attempted to modify a
non-existent group. */
OFPGMFC_CHAINED_GROUP = 9; /* Group not deleted because another
group is forwarding to it. */
OFPGMFC_BAD_TYPE = 10; /* Unsupported or unknown group type. */
OFPGMFC_BAD_COMMAND = 11; /* Unsupported or unknown command. */
OFPGMFC_BAD_BUCKET = 12; /* Error in bucket. */
OFPGMFC_BAD_WATCH = 13; /* Error in watch port/group. */
OFPGMFC_EPERM = 14; /* Permissions error. */
};
/* ofp_error_msg 'code' values for OFPET_PORT_MOD_FAILED. 'data' contains
* at least the first 64 bytes of the failed request. */
enum ofp_port_mod_failed_code {
OFPPMFC_BAD_PORT = 0; /* Specified port number does not exist. */
OFPPMFC_BAD_HW_ADDR = 1; /* Specified hardware address does not
* match the port number. */
OFPPMFC_BAD_CONFIG = 2; /* Specified config is invalid. */
OFPPMFC_BAD_ADVERTISE = 3; /* Specified advertise is invalid. */
OFPPMFC_EPERM = 4; /* Permissions error. */
};
/* ofp_error_msg 'code' values for OFPET_TABLE_MOD_FAILED. 'data' contains
* at least the first 64 bytes of the failed request. */
enum ofp_table_mod_failed_code {
OFPTMFC_BAD_TABLE = 0; /* Specified table does not exist. */
OFPTMFC_BAD_CONFIG = 1; /* Specified config is invalid. */
OFPTMFC_EPERM = 2; /* Permissions error. */
};
/* ofp_error msg 'code' values for OFPET_QUEUE_OP_FAILED. 'data' contains
* at least the first 64 bytes of the failed request */
enum ofp_queue_op_failed_code {
OFPQOFC_BAD_PORT = 0; /* Invalid port (or port does not exist). */
OFPQOFC_BAD_QUEUE = 1; /* Queue does not exist. */
OFPQOFC_EPERM = 2; /* Permissions error. */
};
/* ofp_error_msg 'code' values for OFPET_SWITCH_CONFIG_FAILED. 'data' contains
* at least the first 64 bytes of the failed request. */
enum ofp_switch_config_failed_code {
OFPSCFC_BAD_FLAGS = 0; /* Specified flags is invalid. */
OFPSCFC_BAD_LEN = 1; /* Specified len is invalid. */
OFPSCFC_EPERM = 2; /* Permissions error. */
};
/* ofp_error_msg 'code' values for OFPET_ROLE_REQUEST_FAILED. 'data' contains
* at least the first 64 bytes of the failed request. */
enum ofp_role_request_failed_code {
OFPRRFC_STALE = 0; /* Stale Message: old generation_id. */
OFPRRFC_UNSUP = 1; /* Controller role change unsupported. */
OFPRRFC_BAD_ROLE = 2; /* Invalid role. */
};
/* ofp_error_msg 'code' values for OFPET_METER_MOD_FAILED. 'data' contains
* at least the first 64 bytes of the failed request. */
enum ofp_meter_mod_failed_code {
OFPMMFC_UNKNOWN = 0; /* Unspecified error. */
OFPMMFC_METER_EXISTS = 1; /* Meter not added because a Meter ADD
* attempted to replace an existing Meter. */
OFPMMFC_INVALID_METER = 2; /* Meter not added because Meter specified
* is invalid,
* or invalid meter in meter action. */
OFPMMFC_UNKNOWN_METER = 3; /* Meter not modified because a Meter MODIFY
* attempted to modify a non-existent Meter,
* or bad meter in meter action. */
OFPMMFC_BAD_COMMAND = 4; /* Unsupported or unknown command. */
OFPMMFC_BAD_FLAGS = 5; /* Flag configuration unsupported. */
OFPMMFC_BAD_RATE = 6; /* Rate unsupported. */
OFPMMFC_BAD_BURST = 7; /* Burst size unsupported. */
OFPMMFC_BAD_BAND = 8; /* Band unsupported. */
OFPMMFC_BAD_BAND_VALUE = 9; /* Band value unsupported. */
OFPMMFC_OUT_OF_METERS = 10; /* No more meters available. */
OFPMMFC_OUT_OF_BANDS = 11; /* The maximum number of properties
* for a meter has been exceeded. */
};
/* ofp_error_msg 'code' values for OFPET_TABLE_FEATURES_FAILED. 'data' contains
* at least the first 64 bytes of the failed request. */
enum ofp_table_features_failed_code {
OFPTFFC_BAD_TABLE = 0; /* Specified table does not exist. */
OFPTFFC_BAD_METADATA = 1; /* Invalid metadata mask. */
OFPTFFC_BAD_TYPE = 2; /* Unknown property type. */
OFPTFFC_BAD_LEN = 3; /* Length problem in properties. */
OFPTFFC_BAD_ARGUMENT = 4; /* Unsupported property value. */
OFPTFFC_EPERM = 5; /* Permissions error. */
};
/* OFPT_ERROR: Error message (datapath -> controller). */
message ofp_error_msg {
//ofp_header header;
uint32 type = 1;
uint32 code = 2;
bytes data = 3; /* Variable-length data. Interpreted based
on the type and code. No padding. */
};
/* OFPET_EXPERIMENTER: Error message (datapath -> controller). */
message ofp_error_experimenter_msg {
//ofp_header header;
uint32 type = 1; /* OFPET_EXPERIMENTER. */
uint32 exp_type = 2; /* Experimenter defined. */
uint32 experimenter = 3; /* Experimenter ID which takes the same form
as in struct ofp_experimenter_header. */
bytes data = 4; /* Variable-length data. Interpreted based
on the type and code. No padding. */
};
enum ofp_multipart_type {
/* Description of this OpenFlow switch.
* The request body is empty.
* The reply body is struct ofp_desc. */
OFPMP_DESC = 0;
/* Individual flow statistics.
* The request body is struct ofp_flow_stats_request.
* The reply body is an array of struct ofp_flow_stats. */
OFPMP_FLOW = 1;
/* Aggregate flow statistics.
* The request body is struct ofp_aggregate_stats_request.
* The reply body is struct ofp_aggregate_stats_reply. */
OFPMP_AGGREGATE = 2;
/* Flow table statistics.
* The request body is empty.
* The reply body is an array of struct ofp_table_stats. */
OFPMP_TABLE = 3;
/* Port statistics.
* The request body is struct ofp_port_stats_request.
* The reply body is an array of struct ofp_port_stats. */
OFPMP_PORT_STATS = 4;
/* Queue statistics for a port
* The request body is struct ofp_queue_stats_request.
* The reply body is an array of struct ofp_queue_stats */
OFPMP_QUEUE = 5;
/* Group counter statistics.
* The request body is struct ofp_group_stats_request.
* The reply is an array of struct ofp_group_stats. */
OFPMP_GROUP = 6;
/* Group description.
* The request body is empty.
* The reply body is an array of struct ofp_group_desc. */
OFPMP_GROUP_DESC = 7;
/* Group features.
* The request body is empty.
* The reply body is struct ofp_group_features. */
OFPMP_GROUP_FEATURES = 8;
/* Meter statistics.
* The request body is struct ofp_meter_multipart_requests.
* The reply body is an array of struct ofp_meter_stats. */
OFPMP_METER = 9;
/* Meter configuration.
* The request body is struct ofp_meter_multipart_requests.
* The reply body is an array of struct ofp_meter_config. */
OFPMP_METER_CONFIG = 10;
/* Meter features.
* The request body is empty.
* The reply body is struct ofp_meter_features. */
OFPMP_METER_FEATURES = 11;
/* Table features.
* The request body is either empty or contains an array of
* struct ofp_table_features containing the controller's
* desired view of the switch. If the switch is unable to
* set the specified view an error is returned.
* The reply body is an array of struct ofp_table_features. */
OFPMP_TABLE_FEATURES = 12;
/* Port description.
* The request body is empty.
* The reply body is an array of struct ofp_port. */
OFPMP_PORT_DESC = 13;
/* Experimenter extension.
* The request and reply bodies begin with
* struct ofp_experimenter_multipart_header.
* The request and reply bodies are otherwise experimenter-defined. */
OFPMP_EXPERIMENTER = 0xffff;
};
/* Backward compatibility with 1.3.1 - avoid breaking the API. */
//#define ofp_multipart_types ofp_multipart_type
enum ofp_multipart_request_flags {
OFPMPF_REQ_INVALID = 0;
OFPMPF_REQ_MORE = 1; /* More requests to follow. */
};
message ofp_multipart_request {
//ofp_header header;
ofp_multipart_type type = 1; /* One of the OFPMP_* constants. */
uint32 flags = 2; /* OFPMPF_REQ_* flags. */
bytes body = 3; /* Body of the request. 0 or more bytes. */
};
enum ofp_multipart_reply_flags {
OFPMPF_REPLY_INVALID = 0;
OFPMPF_REPLY_MORE = 1; /* More replies to follow. */
};
message ofp_multipart_reply {
//ofp_header header;
ofp_multipart_type type = 1; /* One of the OFPMP_* constants. */
uint32 flags = 2; /* OFPMPF_REPLY_* flags. */
bytes body = 3; /* Body of the reply. 0 or more bytes. */
};
//#define DESC_STR_LEN 256
//#define SERIAL_NUM_LEN 32
/* Body of reply to OFPMP_DESC request. Each entry is a NULL-terminated
* ASCII string. */
message ofp_desc {
string mfr_desc = 1; /* Manufacturer description. */
string hw_desc = 2; /* Hardware description. */
string sw_desc = 3; /* Software description. */
string serial_num = 4; /* Serial number. */
string dp_desc = 5; /* Human readable description of datapath. */
};
/* Body for ofp_multipart_request of type OFPMP_FLOW. */
message ofp_flow_stats_request {
uint32 table_id = 1; /* ID of table to read (from ofp_table_stats),
OFPTT_ALL for all tables. */
uint32 out_port = 2; /* Require matching entries to include this
as an output port. A value of OFPP_ANY
indicates no restriction. */
uint32 out_group = 3; /* Require matching entries to include this
as an output group. A value of OFPG_ANY
indicates no restriction. */
uint64 cookie = 4; /* Require matching entries to contain this
cookie value */
uint64 cookie_mask = 5; /* Mask used to restrict the cookie bits that
must match. A value of 0 indicates
no restriction. */
ofp_match match = 6; /* Fields to match. Variable size. */
};
/* Body of reply to OFPMP_FLOW request. */
message ofp_flow_stats {
uint64 id = 14; /* Unique ID of flow within device. */
uint32 table_id = 1; /* ID of table flow came from. */
uint32 duration_sec = 2; /* Time flow has been alive in seconds. */
uint32 duration_nsec = 3; /* Time flow has been alive in nanoseconds
beyond duration_sec. */
uint32 priority = 4; /* Priority of the entry. */
uint32 idle_timeout = 5; /* Number of seconds idle before expiration. */
uint32 hard_timeout = 6; /* Number of seconds before expiration. */
uint32 flags = 7; /* Bitmap of OFPFF_* flags. */
uint64 cookie = 8; /* Opaque controller-issued identifier. */
uint64 packet_count = 9; /* Number of packets in flow. */
uint64 byte_count = 10; /* Number of bytes in flow. */
ofp_match match = 12; /* Description of fields. Variable size. */
repeated ofp_instruction instructions = 13; /* Instruction set
(0 or more) */
};
/* Body for ofp_multipart_request of type OFPMP_AGGREGATE. */
message ofp_aggregate_stats_request {
uint32 table_id = 1; /* ID of table to read (from ofp_table_stats)
OFPTT_ALL for all tables. */
uint32 out_port = 2; /* Require matching entries to include this
as an output port. A value of OFPP_ANY
indicates no restriction. */
uint32 out_group = 3; /* Require matching entries to include this
as an output group. A value of OFPG_ANY
indicates no restriction. */
uint64 cookie = 4; /* Require matching entries to contain this
cookie value */
uint64 cookie_mask = 5; /* Mask used to restrict the cookie bits that
must match. A value of 0 indicates
no restriction. */
ofp_match match = 6; /* Fields to match. Variable size. */
};
/* Body of reply to OFPMP_AGGREGATE request. */
message ofp_aggregate_stats_reply {
uint64 packet_count = 1; /* Number of packets in flows. */
uint64 byte_count = 2; /* Number of bytes in flows. */
uint32 flow_count = 3; /* Number of flows. */
};
/* Table Feature property types.
* Low order bit cleared indicates a property for a regular Flow Entry.
* Low order bit set indicates a property for the Table-Miss Flow Entry.
*/
enum ofp_table_feature_prop_type {
OFPTFPT_INSTRUCTIONS = 0; /* Instructions property. */
OFPTFPT_INSTRUCTIONS_MISS = 1; /* Instructions for table-miss. */
OFPTFPT_NEXT_TABLES = 2; /* Next Table property. */
OFPTFPT_NEXT_TABLES_MISS = 3; /* Next Table for table-miss. */
OFPTFPT_WRITE_ACTIONS = 4; /* Write Actions property. */
OFPTFPT_WRITE_ACTIONS_MISS = 5; /* Write Actions for table-miss. */
OFPTFPT_APPLY_ACTIONS = 6; /* Apply Actions property. */
OFPTFPT_APPLY_ACTIONS_MISS = 7; /* Apply Actions for table-miss. */
OFPTFPT_MATCH = 8; /* Match property. */
OFPTFPT_WILDCARDS = 10; /* Wildcards property. */
OFPTFPT_WRITE_SETFIELD = 12; /* Write Set-Field property. */
OFPTFPT_WRITE_SETFIELD_MISS = 13; /* Write Set-Field for table-miss. */
OFPTFPT_APPLY_SETFIELD = 14; /* Apply Set-Field property. */
OFPTFPT_APPLY_SETFIELD_MISS = 15; /* Apply Set-Field for table-miss. */
OFPTFPT_EXPERIMENTER = 0xFFFE; /* Experimenter property. */
OFPTFPT_EXPERIMENTER_MISS = 0xFFFF; /* Experimenter for table-miss. */
};
/* Common header for all Table Feature Properties */
message ofp_table_feature_property {
ofp_table_feature_prop_type type = 1; /* One of OFPTFPT_*. */
oneof value {
ofp_table_feature_prop_instructions instructions = 2;
ofp_table_feature_prop_next_tables next_tables = 3;
ofp_table_feature_prop_actions actions = 4;
ofp_table_feature_prop_oxm oxm = 5;
ofp_table_feature_prop_experimenter experimenter = 6;
}
};
/* Instructions property */
message ofp_table_feature_prop_instructions {
/* One of OFPTFPT_INSTRUCTIONS,
OFPTFPT_INSTRUCTIONS_MISS. */
repeated ofp_instruction instructions = 1; /* List of instructions */
};
/* Next Tables property */
message ofp_table_feature_prop_next_tables {
/* One of OFPTFPT_NEXT_TABLES,
OFPTFPT_NEXT_TABLES_MISS. */
repeated uint32 next_table_ids = 1; /* List of table ids. */
};
/* Actions property */
message ofp_table_feature_prop_actions {
/* One of OFPTFPT_WRITE_ACTIONS,
OFPTFPT_WRITE_ACTIONS_MISS,
OFPTFPT_APPLY_ACTIONS,
OFPTFPT_APPLY_ACTIONS_MISS. */
repeated ofp_action actions = 1; /* List of actions */
};
/* Match, Wildcard or Set-Field property */
message ofp_table_feature_prop_oxm {
/* One of OFPTFPT_MATCH,
OFPTFPT_WILDCARDS,
OFPTFPT_WRITE_SETFIELD,
OFPTFPT_WRITE_SETFIELD_MISS,
OFPTFPT_APPLY_SETFIELD,
OFPTFPT_APPLY_SETFIELD_MISS. */
/* TODO is this a uint32??? */
repeated uint32 oxm_ids = 3; /* Array of OXM headers */
};
/* Experimenter table feature property */
message ofp_table_feature_prop_experimenter {
/* One of OFPTFPT_EXPERIMENTER,
OFPTFPT_EXPERIMENTER_MISS. */
uint32 experimenter = 2; /* Experimenter ID which takes the same
form as in struct
ofp_experimenter_header. */
uint32 exp_type = 3; /* Experimenter defined. */
repeated uint32 experimenter_data = 4;
};
/* Body for ofp_multipart_request of type OFPMP_TABLE_FEATURES./
* Body of reply to OFPMP_TABLE_FEATURES request. */
message ofp_table_features {
uint32 table_id = 1; /* Identifier of table. Lower numbered tables
are consulted first. */
string name = 2;
uint64 metadata_match = 3; /* Bits of metadata table can match. */
uint64 metadata_write = 4; /* Bits of metadata table can write. */
uint32 config = 5; /* Bitmap of OFPTC_* values */
uint32 max_entries = 6; /* Max number of entries supported. */
/* Table Feature Property list */
repeated ofp_table_feature_property properties = 7;
};
/* Body of reply to OFPMP_TABLE request. */
message ofp_table_stats {
uint32 table_id = 1; /* Identifier of table. Lower numbered tables
are consulted first. */
uint32 active_count = 2; /* Number of active entries. */
uint64 lookup_count = 3; /* Number of packets looked up in table. */
uint64 matched_count = 4; /* Number of packets that hit table. */
};
/* Body for ofp_multipart_request of type OFPMP_PORT. */
message ofp_port_stats_request {
uint32 port_no = 1; /* OFPMP_PORT message must request statistics
* either for a single port (specified in
* port_no) or for all ports (if port_no ==
* OFPP_ANY). */
};
/* Body of reply to OFPMP_PORT request. If a counter is unsupported, set
* the field to all ones. */
message ofp_port_stats {
uint32 port_no = 1;
uint64 rx_packets = 2; /* Number of received packets. */
uint64 tx_packets = 3; /* Number of transmitted packets. */
uint64 rx_bytes = 4; /* Number of received bytes. */
uint64 tx_bytes = 5; /* Number of transmitted bytes. */
uint64 rx_dropped = 6; /* Number of packets dropped by RX. */
uint64 tx_dropped = 7; /* Number of packets dropped by TX. */
uint64 rx_errors = 8; /* Number of receive errors. This is a super-set
of more specific receive errors and should be
greater than or equal to the sum of all
rx_*_err values. */
uint64 tx_errors = 9; /* Number of transmit errors. This is a super-set
of more specific transmit errors and should be
greater than or equal to the sum of all
tx_*_err values (none currently defined.) */
uint64 rx_frame_err = 10; /* Number of frame alignment errors. */
uint64 rx_over_err = 11; /* Number of packets with RX overrun. */
uint64 rx_crc_err = 12; /* Number of CRC errors. */
uint64 collisions = 13; /* Number of collisions. */
uint32 duration_sec = 14; /* Time port has been alive in seconds. */
uint32 duration_nsec = 15; /* Time port has been alive in nanoseconds
beyond duration_sec. */
};
/* Body of OFPMP_GROUP request. */
message ofp_group_stats_request {
uint32 group_id = 1; /* All groups if OFPG_ALL. */
};
/* Used in group stats replies. */
message ofp_bucket_counter {
uint64 packet_count = 1; /* Number of packets processed by bucket. */
uint64 byte_count = 2; /* Number of bytes processed by bucket. */
};
/* Body of reply to OFPMP_GROUP request. */
message ofp_group_stats {
uint32 group_id = 1; /* Group identifier. */
uint32 ref_count = 2; /* Number of flows or groups that directly
forward to this group. */
uint64 packet_count = 3; /* Number of packets processed by group. */
uint64 byte_count = 4; /* Number of bytes processed by group. */
uint32 duration_sec = 5; /* Time group has been alive in seconds. */
uint32 duration_nsec = 6; /* Time group has been alive in nanoseconds
beyond duration_sec. */
repeated ofp_bucket_counter bucket_stats = 7; /* One counter set per
bucket. */
};
/* Body of reply to OFPMP_GROUP_DESC request. */
message ofp_group_desc {
ofp_group_type type = 1; /* One of OFPGT_*. */
uint32 group_id = 2; /* Group identifier. */
repeated ofp_bucket buckets = 3; /* List of buckets - 0 or more. */
};
message ofp_group_entry {
ofp_group_desc desc = 1 [(common.yang_inline_node).id = 'desc',
(common.yang_inline_node).type = 'openflow_13-ofp_group_desc'];
ofp_group_stats stats = 2;
};
/* Backward compatibility with 1.3.1 - avoid breaking the API. */
//#define ofp_group_desc_stats ofp_group_desc
/* Group configuration flags */
enum ofp_group_capabilities {
OFPGFC_INVALID = 0;
OFPGFC_SELECT_WEIGHT = 1; /* Support weight for select groups */
OFPGFC_SELECT_LIVENESS = 2; /* Support liveness for select groups */
OFPGFC_CHAINING = 4; /* Support chaining groups */
OFPGFC_CHAINING_CHECKS = 8; /* Check chaining for loops and delete */
};
/* Body of reply to OFPMP_GROUP_FEATURES request. Group features. */
message ofp_group_features {
uint32 types = 1; /* Bitmap of (1 << OFPGT_*) values supported. */
uint32 capabilities = 2; /* Bitmap of OFPGFC_* capability supported. */
repeated uint32 max_groups = 3; /* Maximum number of groups for each type.
*/
repeated uint32 actions = 4; /* Bitmaps of (1 << OFPAT_*) values
supported. */
};
/* Body of OFPMP_METER and OFPMP_METER_CONFIG requests. */
message ofp_meter_multipart_request {
uint32 meter_id = 1; /* Meter instance, or OFPM_ALL. */
};
/* Statistics for each meter band */
message ofp_meter_band_stats {
uint64 packet_band_count = 1; /* Number of packets in band. */
uint64 byte_band_count = 2; /* Number of bytes in band. */
};
/* Body of reply to OFPMP_METER request. Meter statistics. */
message ofp_meter_stats {
uint32 meter_id = 1; /* Meter instance. */
uint32 flow_count = 2; /* Number of flows bound to meter. */
uint64 packet_in_count = 3; /* Number of packets in input. */
uint64 byte_in_count = 4; /* Number of bytes in input. */
uint32 duration_sec = 5; /* Time meter has been alive in seconds. */
uint32 duration_nsec = 6;/* Time meter has been alive in nanoseconds
beyond duration_sec. */
repeated ofp_meter_band_stats band_stats = 7; /* The band_stats length is
inferred from the length field. */
};
/* Body of reply to OFPMP_METER_CONFIG request. Meter configuration. */
message ofp_meter_config {
uint32 flags = 1; /* All OFPMF_* that apply. */
uint32 meter_id = 2; /* Meter instance. */
repeated ofp_meter_band_header bands = 3; /* The bands length is
inferred from the length field. */
};
/* Body of reply to OFPMP_METER_FEATURES request. Meter features. */
message ofp_meter_features {
uint32 max_meter = 1; /* Maximum number of meters. */
uint32 band_types = 2; /* Bitmaps of (1 << OFPMBT_*) values supported.
*/
uint32 capabilities = 3; /* Bitmaps of "ofp_meter_flags". */
uint32 max_bands = 4; /* Maximum bands per meters */
uint32 max_color = 5; /* Maximum color value */
};
message ofp_meter_entry {
ofp_meter_config config=1 [(common.yang_inline_node).id = 'config',
(common.yang_inline_node).type = 'openflow_13-ofp_meter_config'];
ofp_meter_stats stats=2;
}
/* Body for ofp_multipart_request/reply of type OFPMP_EXPERIMENTER. */
message ofp_experimenter_multipart_header {
uint32 experimenter = 1; /* Experimenter ID which takes the same form
as in struct ofp_experimenter_header. */
uint32 exp_type = 2; /* Experimenter defined. */
bytes data = 3; /* Experimenter-defined arbitrary additional data. */
};
/* Experimenter extension. */
message ofp_experimenter_header {
//ofp_header header; /* Type OFPT_EXPERIMENTER. */
uint32 experimenter = 1; /* Experimenter ID:
* - MSB 0: low-order bytes are IEEE OUI.
* - MSB != 0: defined by ONF. */
uint32 exp_type = 2; /* Experimenter defined. */
bytes data = 3; /* Experimenter-defined arbitrary additional data. */
};
/* All ones is used to indicate all queues in a port (for stats retrieval). */
//#define OFPQ_ALL 0xffffffff
/* Min rate > 1000 means not configured. */
//#define OFPQ_MIN_RATE_UNCFG 0xffff
/* Max rate > 1000 means not configured. */
//#define OFPQ_MAX_RATE_UNCFG 0xffff
enum ofp_queue_properties {
OFPQT_INVALID = 0;
OFPQT_MIN_RATE = 1; /* Minimum datarate guaranteed. */
OFPQT_MAX_RATE = 2; /* Maximum datarate. */
OFPQT_EXPERIMENTER = 0xffff; /* Experimenter defined property. */
};
/* Common description for a queue. */
message ofp_queue_prop_header {
uint32 property = 1; /* One of OFPQT_. */
uint32 len = 2; /* Length of property, including this header. */
};
/* Min-Rate queue property description. */
message ofp_queue_prop_min_rate {
ofp_queue_prop_header prop_header = 1;/* prop: OFPQT_MIN, len: 16. */
uint32 rate = 2; /* In 1/10 of a percent = 0;>1000 -> disabled. */
};
/* Max-Rate queue property description. */
message ofp_queue_prop_max_rate {
ofp_queue_prop_header prop_header = 1;/* prop: OFPQT_MAX, len: 16. */
uint32 rate = 2; /* In 1/10 of a percent = 0;>1000 -> disabled. */
};
/* Experimenter queue property description. */
message ofp_queue_prop_experimenter {
ofp_queue_prop_header prop_header = 1;/* prop: OFPQT_EXPERIMENTER */
uint32 experimenter = 2; /* Experimenter ID which takes the same
form as in struct
ofp_experimenter_header. */
bytes data = 3; /* Experimenter defined data. */
};
/* Full description for a queue. */
message ofp_packet_queue {
uint32 queue_id = 1; /* id for the specific queue. */
uint32 port = 2; /* Port this queue is attached to. */
repeated ofp_queue_prop_header properties = 4; /* List of properties. */
};
/* Query for port queue configuration. */
message ofp_queue_get_config_request {
//ofp_header header;
uint32 port = 1; /* Port to be queried. Should refer
to a valid physical port (i.e. <= OFPP_MAX),
or OFPP_ANY to request all configured
queues.*/
};
/* Queue configuration for a given port. */
message ofp_queue_get_config_reply {
//ofp_header header;
uint32 port = 1;
repeated ofp_packet_queue queues = 2; /* List of configured queues. */
};
/* OFPAT_SET_QUEUE action struct: send packets to given queue on port. */
message ofp_action_set_queue {
uint32 type = 1; /* OFPAT_SET_QUEUE. */
uint32 queue_id = 3; /* Queue id for the packets. */
};
message ofp_queue_stats_request {
uint32 port_no = 1; /* All ports if OFPP_ANY. */
uint32 queue_id = 2; /* All queues if OFPQ_ALL. */
};
message ofp_queue_stats {
uint32 port_no = 1;
uint32 queue_id = 2; /* Queue i.d */
uint64 tx_bytes = 3; /* Number of transmitted bytes. */
uint64 tx_packets = 4; /* Number of transmitted packets. */
uint64 tx_errors = 5; /* Number of packets dropped due to overrun. */
uint32 duration_sec = 6; /* Time queue has been alive in seconds. */
uint32 duration_nsec = 7; /* Time queue has been alive in nanoseconds
beyond duration_sec. */
};
/* Configures the "role" of the sending controller. The default role is:
*
* - Equal (OFPCR_ROLE_EQUAL), which allows the controller access to all
* OpenFlow features. All controllers have equal responsibility.
*
* The other possible roles are a related pair:
*
* - Master (OFPCR_ROLE_MASTER) is equivalent to Equal, except that there
* may be at most one Master controller at a time: when a controller
* configures itself as Master, any existing Master is demoted to the
* Slave role.
*
* - Slave (OFPCR_ROLE_SLAVE) allows the controller read-only access to
* OpenFlow features. In particular attempts to modify the flow table
* will be rejected with an OFPBRC_EPERM error.
*
* Slave controllers do not receive OFPT_PACKET_IN or OFPT_FLOW_REMOVED
* messages, but they do receive OFPT_PORT_STATUS messages.
*/
/* Controller roles. */
enum ofp_controller_role {
OFPCR_ROLE_NOCHANGE = 0; /* Don't change current role. */
OFPCR_ROLE_EQUAL = 1; /* Default role, full access. */
OFPCR_ROLE_MASTER = 2; /* Full access, at most one master. */
OFPCR_ROLE_SLAVE = 3; /* Read-only access. */
};
/* Role request and reply message. */
message ofp_role_request {
//ofp_header header; /* Type OFPT_ROLE_REQUEST/OFPT_ROLE_REPLY. */
ofp_controller_role role = 1; /* One of OFPCR_ROLE_*. */
uint64 generation_id = 2; /* Master Election Generation Id */
};
/* Asynchronous message configuration. */
message ofp_async_config {
//ofp_header header; /* OFPT_GET_ASYNC_REPLY or OFPT_SET_ASYNC. */
repeated uint32 packet_in_mask = 1; /* Bitmasks of OFPR_* values. */
repeated uint32 port_status_mask = 2; /* Bitmasks of OFPPR_* values. */
repeated uint32 flow_removed_mask = 3;/* Bitmasks of OFPRR_* values. */
};
/* ADDITIONAL VOLTHA SPECIFIC MESSAGE TYPES, AIDING RPC CALLS */
message MeterModUpdate {
string id = 1; // Device.id or LogicalDevice.id
ofp_meter_mod meter_mod = 2;
}
message MeterStatsReply {
repeated ofp_meter_stats meter_stats = 1;
}
message FlowTableUpdate {
string id = 1; // Device.id or LogicalDevice.id
ofp_flow_mod flow_mod = 2;
}
message FlowGroupTableUpdate {
string id = 1; // Device.id or LogicalDevice.id
ofp_group_mod group_mod = 2;
}
message Flows {
repeated ofp_flow_stats items = 1;
}
message Meters {
repeated ofp_meter_entry items = 1;
}
message FlowGroups {
repeated ofp_group_entry items = 1;
}
message FlowChanges {
Flows to_add = 1;
Flows to_remove = 2;
}
message FlowGroupChanges {
FlowGroups to_add = 1;
FlowGroups to_remove = 2;
FlowGroups to_update = 3;
}
message PacketIn {
string id = 1; // LogicalDevice.id
ofp_packet_in packet_in = 2;
}
message PacketOut {
string id = 1; // LogicalDevice.id
ofp_packet_out packet_out = 2;
}
message ChangeEvent {
string id = 1; // LogicalDevice.id
oneof event {
ofp_port_status port_status = 2;
}
}