| # Copyright 2022-2024 Open Networking Foundation (ONF) and the ONF Contributors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # FIXME Can we use the same test against BBSim and Hardware? |
| |
| *** Settings *** |
| Suite Setup Setup Suite |
| Test Setup Setup |
| Test Teardown Teardown |
| Suite Teardown Teardown Suite |
| Library XML |
| Library String |
| Library DateTime |
| Library Process |
| Library Collections |
| Library RequestsLibrary |
| Library OperatingSystem |
| Resource ../../libraries/bbf_adapter_utilities.robot |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../variables/variables.robot |
| Resource ../../libraries/power_switch.robot |
| |
| *** Variables *** |
| ${POD_NAME} flex-ocp-cord |
| ${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs |
| ${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml |
| ${HELM_CHARTS_DIR} ~/helm-charts |
| ${VOLTHA_POD_NUM} 8 |
| ${NAMESPACE} voltha |
| ${INFRA_NAMESPACE} default |
| ${timeout} 60s |
| ${of_id} 0 |
| ${logical_id} 0 |
| ${has_dataplane} False |
| ${teardown_device} True |
| ${scripts} ../../scripts |
| |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| |
| # logging flag to enable Collect Logs, can be passed via the command line too |
| # example: -v logging:False |
| ${logging} True |
| |
| # Flag specific to Soak Jobs |
| ${SOAK_TEST} False |
| ${bbsim_port} 50060 |
| |
| #Suppress the subscribe phase |
| ${supress_add_subscriber} False |
| |
| #Enable or Disable the MacLearning verifier for MacLearning ONOS APP |
| ${maclearningenabled} False #Not yet used but it is a placeholder |
| |
| *** Test Cases *** |
| BBF Adapter Aggregation Test |
| [Documentation] Do a runtime test enabling all the device |
| ... and verify if VOLTHA and BBF have the same view, |
| ... with the correct translation, of the network |
| [Tags] sanityBbfAdapter |
| [Setup] Start Logging sanityBbfAdapter |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging sanityBbfAdapter |
| Run Keyword Setup ${SOAK_TEST} |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Get BBF Device Aggregation ${NAMESPACE} ${CURDIR}/data.xml ${scripts} |
| Log ${supress_add_subscriber} |
| Perform Sanity Test of BBFadapter Aggregation ./data.xml ${supress_add_subscriber} |
| Teardown Suite |
| |
| Test Disable and Enable ONU for BBF |
| [Documentation] Disable ONUs from the BBF Adapter (PlaceHolder with VOLTHA) |
| ... Verify all the states in voltha and in the BBF Adapter (like a compare). |
| ... Enable the ONUs from the BBF adapter, verify the enable states in voltha |
| ... and in BBF Adapter (like a compare). |
| ... It is also possible to verify a connectivity, with a no block test. |
| [Tags] bbfAdapterFunctionality disableEnableONUBBF |
| [Setup] Start Logging disableEnableONUBBF |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging disableEnableONUBBF |
| # Create a single Setup for Multiple Test Case |
| Run Keyword Setup ${SOAK_TEST} |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| # Disable, verify state, Enable and verify stato for each ONU |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| ... ${of_id} ${src['uni_id']} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| # Subscribe the ONU if requested for the tests |
| Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s |
| ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port} |
| # Disbale the device (actually with voltha in future with BBF Adapter) |
| Disable Device ${onu_device_id} |
| Disable Device in BBF ${onu_device_id} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| ONU XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Define some states that the ONU reason can be |
| ${onu_reasons}= Create List omci-flows-deleted |
| Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} omci-admin-lock |
| Log ${onu_reasons} |
| # Verify in Voltha the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device DISABLED UNKNOWN |
| ... REACHABLE ${src['onu']} onu=True onu_reason=${onu_reasons} |
| # Verify in the BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Onu in BBF DISABLED UNKNOWN |
| ... REACHABLE ${src['onu']} ${onu_reasons} |
| # Verify if the disabling of the ONU desable also the UNI port |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
| # Verify if there are not connectivity to the ONU |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds ${timeout} 2s |
| ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| # Enable the device (actually with voltha in future with BBF Adapter) |
| Enable Device ${onu_device_id} |
| Enable Device in BBF ${onu_device_id} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| ONU XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Define some states that the ONU reason can be |
| ${onu_reasons}= Create List omci-flows-pushed |
| Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} onu-reenabled |
| Log ${onu_reasons} |
| # Verify in the Voltha the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device ENABLED ACTIVE |
| ... REACHABLE ${src['onu']} onu=True onu_reason=${onu_reasons} |
| # Verify in the BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Onu in BBF ENABLED ACTIVE |
| ... REACHABLE ${src['onu']} ${onu_reasons} |
| # Verify if the disabling of the ONU desable also the UNI port |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
| # Verify if there are not connectivity to the ONU |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds ${timeout} 2s |
| ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| |
| Test Disable and Enable OLT for BBF |
| [Documentation] Disable OLTs from the BBF Adapter (Placeholder with Voltha). |
| ... Verify the disable states of OLTs in Voltha and in the BBF Adapter (like a compare). |
| ... Enable the OLTs from the BBF adapter, verify the states in voltha |
| ... and in BBF Adapter (like a compare). |
| ... It is also possible to verify a connectivity, with a no block test. |
| [Tags] bbfAdapterFunctionality disableEnableOLTBBF |
| [Setup] Start Logging disableEnableOLTBBF |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging disableEnableOLTBBF |
| # Disable each OLT and Validate it state |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| ${of_id}= Get ofID From OLT List ${olt_serial_number} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in Voltha the State of the OLT |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device ENABLED ACTIVE REACHABLE |
| ... ${olt_serial_number} |
| # Verify in BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF ENABLED ACTIVE REACHABLE |
| ... ${olt_serial_number} ${olt_device_id} |
| # Disbale the device (actually with voltha in future with BBF Adapter) |
| Disable Device ${olt_device_id} |
| Disable Device in BBF ${olt_device_id} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in Voltha the State of the OLT |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device DISABLED UNKNOWN REACHABLE |
| ... ${olt_serial_number} |
| # Verify in BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF DISABLED UNKNOWN REACHABLE |
| ... ${olt_serial_number} ${olt_device_id} |
| END |
| # Enable the OLT back and check OLT operstatus are back to "ACTIVE" |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| ${of_id}= Get ofID From OLT List ${olt_serial_number} |
| # Enable the device (actually with voltha in future with BBF Adapter) |
| Enable Device ${olt_device_id} |
| Enable Device in BBF ${olt_device_id} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in Voltha the State of the OLT |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device ENABLED ACTIVE REACHABLE |
| ... ${olt_serial_number} |
| # Verify in BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF ENABLED ACTIVE REACHABLE |
| ... ${olt_serial_number} ${olt_device_id} |
| END |
| |
| Test Disable and Delete OLT for BBF |
| [Documentation] Disable OLTs from the BBF Adapter (PlaceHolder with Voltha) |
| ... Verify the disable state of the OLT in voltha and in the BBF Adapter, |
| ... Delete the OLTs from the BBF adapter, verify if it was done correctly in voltha |
| ... and in BBF Adapter. |
| [Tags] bbfAdapterFunctionality disableEnableOLTBBF |
| [Setup] Start Logging disableEnableOLTBBF |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging disableEnableOLTBBF |
| # Disable and Validate OLT Device |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| Disable Device ${olt_device_id} |
| Disable Device in BBF ${olt_device_id} |
| ${of_id}= Get ofID From OLT List ${olt_serial_number} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| ONU XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Retrive from BBF Adapter an Update XML that contain all the devices |
| ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in Voltha the State of the OLT |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device DISABLED UNKNOWN REACHABLE |
| ... ${olt_serial_number} |
| Validate Olt Disabled in BBF ${olt_serial_number} ${olt_device_id} |
| |
| ${num_onus}= Set Variable ${list_olts}[${I}][onucount] |
| # Validate ONUs |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate ONUs After OLT Disable |
| ... ${num_onus} ${olt_serial_number} |
| Validate ONUs After OLT Disable in BBF ${olt_serial_number} |
| # Delete the device (actually with voltha in future with BBF Adapter) |
| Delete Device ${olt_device_id} |
| Delete Device in BBF ${olt_device_id} |
| # Retrive from BBF Adapter an Update XML that contain all the devices |
| ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Check that the OLT are actually removed from the system |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed |
| ... ${olt_serial_number} |
| # Check if the OLT has been removed from the system |
| Validate Device Removed in BBF ${olt_serial_number} |
| # Validate if all the ONUS connected at the OLT revomed are also been removed in VOLTHA |
| Run Keyword and Continue On Failure Validate all ONUS for OLT Removed ${num_all_onus} ${hosts} |
| ... ${olt_serial_number} ${timeout} |
| # Validate if all the ONUS connected at the OLT revomed are also been removed in BBF Adapter |
| Validate All Onus for OLT Removed in BBF ${olt_serial_number} |
| #Wait Until Keyword Succeeds ${timeout} 5s |
| #... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| END |
| Teardown Suite |
| |
| Test Delete and ReAdd OLT for BBF |
| [Documentation] Delete OLTs from the BBF Adapter (PlaceHolder with Voltha) |
| ... Verify if the OLT and ONUs connected was really delete in voltha and in the BBF Adapter. |
| ... Readd all the OLTs from the BBF adapter, verify the enable state in voltha |
| ... and in BBF Adapter and check the correct status after the readd. |
| [Tags] bbfAdapterFunctionality DeleteReAddOLTBBF |
| [Setup] Start Logging DeleteReAddOLTBBF |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging DeleteReAddOLTBBF |
| Run Keyword Setup ${SOAK_TEST} |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| # Delete the device (actually with voltha in future with BBF Adapter) |
| Delete Device ${olt_device_id} |
| Delete Device in BBF ${olt_device_id} |
| # Retrive from BBF Adapter an Update XML that contain all the devices |
| ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Check if the OLT has been removed from the system |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device Removed ${olt_serial_number} |
| # Check if the OLT has been removed from the BBF Adapter |
| Validate Device Removed in BBF ${olt_serial_number} |
| # Validate if all the ONUS connected at the OLT revomed are also been removed in VOLTHA |
| Run Keyword and Continue On Failure Validate all ONUS for OLT Removed ${num_all_onus} ${hosts} |
| ... ${olt_serial_number} ${timeout} |
| # Validate if all the ONUS connected at the OLT revomed are also been removed in BBF Adapter |
| Validate all ONUS for OLT Removed in BBF ${olt_serial_number} |
| #Wait Until Keyword Succeeds ${timeout} 5s |
| #... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| END |
| # Recreate the OLTs |
| Run Keyword Setup ${SOAK_TEST} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| # Verify in Voltha the State of the OLT |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device ENABLED ACTIVE REACHABLE |
| ... ${olt_serial_number} |
| # Verify in BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF ENABLED ACTIVE REACHABLE |
| ... ${olt_serial_number} ${olt_device_id} |
| END |
| Teardown Suite |
| |
| Test Disable ONUs and OLT for BBF |
| [Documentation] Disable ONUs and OLTs, verify if the OLT and ONUs connected |
| ... was really disable in voltha and in the BBF Adapter. |
| ... Delete ONUs and OLTs, verify if the ONUs and OLT was really deleted |
| ... in voltha and BBF Adapter. |
| [Tags] bbfAdapterFunctionality DisableONUOLTBBF |
| [Setup] Start Logging DisableONUOLTBBF |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging DisableONUOLTBBF |
| Run Keyword Setup ${SOAK_TEST} |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| # Define some states that the ONU reason can be |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${src['olt']} |
| # Subscribe the ONU if requested for the tests |
| Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s |
| ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port} |
| # Onu reasons selection |
| @{onu_reasons}= Create List omci-flows-pushed |
| Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} initial-mib-downloaded |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| ONU XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in the Voltha the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device ENABLED ACTIVE |
| ... REACHABLE ${src['onu']} onu=True onu_reason=${onu_reasons} |
| # Verify in the BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Onu in BBF ENABLED ACTIVE |
| ... REACHABLE ${src['onu']} ${onu_reasons} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in Voltha the State of the OLT |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device ENABLED ACTIVE |
| ... REACHABLE ${src['olt']} |
| # Verify in BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF ENABLED ACTIVE REACHABLE |
| ... ${src['olt']} ${olt_device_id} |
| # Disbale the device (actually with voltha in future with BBF Adapter) |
| Disable Device ${onu_device_id} |
| Disable Device in BBF ${onu_device_id} |
| # Onu reasons selection |
| ${onu_reasons}= Create List omci-flows-deleted |
| Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} omci-admin-lock |
| Log ${onu_reasons} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| ONU XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in the Voltha the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device DISABLED UNKNOWN |
| ... REACHABLE ${src['onu']} ${onu_reasons} onu=True |
| # Verify in the BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Onu in BBF DISABLED UNKNOWN |
| ... REACHABLE ${src['onu']} ${onu_reasons} |
| # Check if the OLT where the ONU is connected have the correct state |
| # after the disbaling one ONU connected |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in Voltha the State of the OLT |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device ENABLED ACTIVE |
| ... REACHABLE ${src['olt']} |
| # Verify in BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF ENABLED ACTIVE REACHABLE |
| ... ${src['olt']} ${olt_device_id} |
| END |
| # Disable all OLTs and check if the state after disable are correct |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| Disable Device ${olt_device_id} |
| Disable Device in BBF ${olt_device_id} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in Voltha the State of the OLT |
| Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device DISABLED UNKNOWN REACHABLE |
| ... ${olt_serial_number} |
| # Verify in BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF DISABLED UNKNOWN REACHABLE |
| ... ${olt_serial_number} ${olt_device_id} |
| END |
| |
| Delete Disabled ONUs and OLT for BBF |
| [Documentation] Continue of the before test. |
| ... Validate the Disble state of ONUs and Oltes, |
| ... Delete Disabled Onus and Disabled Olts and verify the correct |
| ... elimination of all devices from Voltha and BBF Adapter. |
| [Tags] bbfAdapterFunctionality DeleteONUOLTBBF |
| [Setup] Start Logging DeleteONUOLTBBF |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging DeleteONUOLTBBF |
| # Validate ONUs states after OLT disable |
| ${onu_reasons}= Create List stopping-openomci |
| Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} stopping-openomci |
| Log ${onu_reasons} |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${src['olt']} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| ONU XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in the Voltha the State of the ONU |
| Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device DISABLED DISCOVERED |
| ... UNREACHABLE ${src['onu']} ${onu_reasons} onu=True |
| # Verify in the BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Onu in BBF DISABLED DISCOVERED |
| ... UNREACHABLE ${src['onu']} ${onu_reasons} |
| # Delete the device (actually with voltha in future with BBF Adapter) |
| Delete Device ${onu_device_id} |
| Delete Device in BBF ${onu_device_id} |
| # Retrive from BBF Adapter an Update XML that contain all the devices |
| ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts} |
| Validate Device Removed in BBF ${src['onu']} |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| OLT XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify in Voltha the State of the OLT |
| Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate OLT Device DISABLED UNKNOWN |
| ... REACHABLE ${src['olt']} |
| # Verify in BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF DISABLED UNKNOWN REACHABLE |
| ... ${src['olt']} ${olt_device_id} |
| END |
| # Delete all OLTs |
| # Delete All Devices and Verify |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| # Delete the device (actually with voltha in future with BBF Adapter) |
| Delete Device ${olt_device_id} |
| Delete Device in BBF ${olt_device_id} |
| # Retrive from BBF Adapter an Update XML that contain all the devices |
| ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Check that the OLT and the ONUs are actually removed from the system |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed |
| ... ${olt_serial_number} |
| # Check if the OLT has been removed from the system |
| Validate Device Removed in BBF ${olt_serial_number} |
| # Validate if all the ONUS connected at the OLT revomed are also been removed in VOLTHA |
| Run Keyword and Continue On Failure Validate all ONUS for OLT Removed ${num_all_onus} ${hosts} |
| ... ${olt_serial_number} ${timeout} |
| # Validate if all the ONUS connected at the OLT revomed are also been removed in BBF Adapter |
| Validate all ONUS for OLT Removed in BBF ${olt_serial_number} |
| #Wait Until Keyword Succeeds ${timeout} 5s |
| #... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| END |
| Teardown Suite |
| |
| Test ONU Delete and Auto-Discovery for BBF |
| [Documentation] Validate the Autodiscory of an ONUs in case of Delete. |
| ... Delete the device and verify if them was really deleted. |
| ... Verify if all the Onus are re discovered in the correct way. |
| ... Verify the state after and before a subscription if needed. |
| ... Verify the connectivity if needed. |
| [Tags] bbfAdapterFunctionality ONUAutoDiscoveryBBF |
| [Setup] Start Logging ONUAutoDiscoveryBBF |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging ONUAutoDiscoveryBBF |
| Clear All Devices Then Create New Device |
| # Performing Sanity Test to make sure subscribers are all AUTH+DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${nni_port}= Wait Until Keyword Succeeds ${timeout} 2s Get NNI Port in ONOS ${of_id} |
| # Subscribe the ONU if requested for the tests |
| Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s |
| ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify ONU state in voltha |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| ONU XML update From BBF ${CURDIR}/data.xml ${scripts} |
| @{onu_reasons}= Create List omci-flows-pushed |
| Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} initial-mib-downloaded |
| # Verify in the Voltha the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Validate Device ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=${onu_reasons} |
| # Verify in the BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Validate Onu in BBF ENABLED ACTIVE |
| ... REACHABLE ${src['onu']} ${onu_reasons} |
| # Delete ONU and Verify Ping Fails |
| # Delete the device (actually with voltha in future with BBF Adapter) |
| Delete Device ${onu_device_id} |
| Delete Device in BBF ${onu_device_id} |
| # Retrive from BBF Adapter an Update XML that contain all the devices |
| ALL DEVICES XML update From BBF ${CURDIR}/data.xml ${scripts} |
| # Verify if the ONU has been removed from the system |
| Validate Device Removed in BBF ${src['onu']} |
| Run Keyword If ${has_dataplane} Verify ping is successful except for given device |
| ... ${num_all_onus} ${src['onu']} |
| # Verify that no pending flows exist for the ONU port |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| # ONU Auto-Discovery |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
| # Check ONU port is Enabled in ONOS |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| Run Keyword If ${has_dataplane} Clean Up Linux ${onu_device_id} |
| # Re-Add Subscriber |
| Run Keyword If '${supress_add_subscriber}' == 'False' Wait Until Keyword Succeeds ${timeout} 2s |
| ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify that no pending flows exist for the ONU port |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| # Verify ONU state in voltha |
| # Retrive from BBF Adapter an Update XML that contain the ONUs |
| ONU XML update From BBF ${CURDIR}/data.xml ${scripts} |
| @{onu_reasons}= Create List omci-flows-pushed |
| Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} initial-mib-downloaded |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Validate Device ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=${onu_reasons} |
| # Verify in the BBF Adapter the State of the ONU |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Validate Onu in BBF ENABLED ACTIVE |
| ... REACHABLE ${src['onu']} ${onu_reasons} |
| # Verify Meters in ONOS |
| #Wait Until Keyword Succeeds ${timeout} 5s |
| #... Verify Meters in ONOS Ietf ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} ${onu_port} |
| Run Keyword If ${has_dataplane} Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| END |
| # Verify flows for all OLTs |
| #Wait Until Keyword Succeeds ${timeout} 5s Validate All OLT Flows |
| |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Set up the test suite |
| Common Test Suite Setup |
| #power_switch.robot needs it to support different vendor's power switch |
| ${switch_type}= Get Variable Value ${web_power_switch.type} |
| Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type} |
| |
| Clear All Devices Then Create New Device |
| [Documentation] Remove any devices from VOLTHA and ONOS |
| # Remove all devices from voltha and nos |
| Run Keyword Delete All Devices and Verify |
| # Execute normal test Setup Keyword |
| Run Keyword Setup ${SOAK_TEST} |