| # -*- makefile -*- |
| # ----------------------------------------------------------------------- |
| # Copyright 2022-2023 Open Networking Foundation (ONF) and the ONF Contributors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ----------------------------------------------------------------------- |
| |
| .DEFAULT_GOAL := sanity-kind |
| |
| TOP ?= . |
| MAKEDIR ?= $(TOP)/makefiles |
| |
| # Assign early: altered by include |
| ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST)))) |
| |
| ##--------------------## |
| ##---] INCLUDES [---## |
| ##--------------------## |
| include $(MAKEDIR)/include.mk |
| include $(MAKEDIR)/patches/include.mk |
| |
| # Configuration and lists of files for linting/testing |
| VERSION ?= $(shell cat ./VERSION) |
| |
| PYTHON_FILES := $(wildcard libraries/*.py) |
| ROBOT_FILES := $(shell find . -name *.robot -print) |
| YAML_FILES := $(shell find ./tests -type f \( -name *.yaml -o -name *.yml \) -print) |
| JSON_FILES := $(shell find ./tests -name *.json -print) |
| |
| # Robot config |
| ROBOT_SANITY_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind.yaml |
| ROBOT_SANITY_DT_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-dt.yaml |
| ROBOT_SANITY_DT_SINGLE_PON_FILE_VGC ?= $(ROOT_DIR)/tests/data/bbsim-kind-dt-vgc.yaml |
| ROBOT_SANITY_MULTIPLE_OLT_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-2OLTx2ONUx2PON.yaml |
| ROBOT_SANITY_MULTIPLE_OLT_FILE_VGC ?= $(ROOT_DIR)/tests/data/bbsim-kind-2OLTx2ONUx2PON_VGC.yaml |
| ROBOT_SANITY_DT_MULTIPLE_OLT_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-2OLTx2ONUx2PON-dt.yaml |
| ROBOT_SANITY_TT_MULTIPLE_OLT_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-2OLTx2ONUx2PON-tt.yaml |
| ROBOT_FAIL_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind.yaml |
| ROBOT_SANITY_MULT_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-2x2.yaml |
| ROBOT_SCALE_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-16.yaml |
| ROBOT_SCALE_MULT_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-8x2.yaml |
| ROBOT_SCALE_MULT_ONU_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-8x8.yaml |
| ROBOT_DEBUG_LOG_OPT ?= |
| ROBOT_MISC_ARGS ?= |
| ROBOT_SANITY_TT_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-tt.yaml |
| ROBOT_DMI_SINGLE_BBSIM_FILE ?= $(ROOT_DIR)/tests/data/dmi-components-bbsim.yaml |
| ROBOT_DMI_SINGLE_ADTRAN_FILE ?= $(ROOT_DIR)/tests/data/dmi-components-adtran.yaml |
| ROBOT_SW_UPGRADE_FILE ?= $(ROOT_DIR)/tests/data/software-upgrade.yaml |
| ROBOT_PM_DATA_FILE ?= $(ROOT_DIR)/tests/data/pm-data.yaml |
| ROBOT_SANITY_MULTI_UNI_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-multi-uni.yaml |
| ROBOT_SANITY_MULTI_UNI_MULTIPLE_OLT_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-multi-uni-2OLTx2ONUx2PON.yaml |
| ROBOT_SANITY_TT_MULTI_UNI_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-multi-uni-tt.yaml |
| ROBOT_SANITY_TT_MULTI_UNI_MULTIPLE_OLT_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-multi-uni-2OLTx2ONUx2PON-tt.yaml |
| ROBOT_SANITY_DT_FTTB_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-dt-fttb-1OLTx1PONx2ONUx2UNI.yaml |
| ROBOT_SANITY_DT_FTTB_SINGLE_PON_FILE_VGC ?= $(ROOT_DIR)/tests/data/bbsim-kind-dt-fttb-1OLTx1PONx2ONUx2UNI.yaml |
| ROBOT_SANITY_TIM_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-tim.yaml |
| ROBOT_SANITY_TIM_SINGLE_PON_MULTI_ONU_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-tim-OLTxPONx2ONU.yaml |
| ROBOT_SANITY_TIM_MULTI_PON_MULTI_ONU_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-tim-OLTx2PONx2ONU.yaml |
| ROBOT_SANITY_TIM_MULTI_OLT_MULTI_PON_MULTI_ONU_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-tim-2OLTx2PONx2ONU.yaml |
| ROBOT_SANITY_TIM_MCAST_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-tim-Mcast.yaml |
| ROBOT_SANITY_TIM_MCAST_MULTI_OLT_MULTI_PON_MULTI_ONU_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-tim-Mcast-2OLTx2PONx2UNI-single_multi_Sub.yaml |
| ROBOT_SANITY_BBF_ADPATER_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-bbf-adapter.yaml |
| ROBOT_SANITY_BBF_ADPATER_ADD_DELETE_FILE ?= $(ROOT_DIR)/tests/data/bbsim-bbf-adapter_addDelete_tests.yaml |
| ROBOT_SANITY_DT_SINGLE_PON_MULTI_ONU_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-dt-1OLTx1PONx2ONU.yaml |
| |
| # for backwards compatibility |
| sanity-kind: sanity-single-kind |
| |
| # to simplify ci |
| sanity-kind-att: sanity-single-kind |
| |
| # ATT Multi-UNI Sanity Target |
| sanity-kind-multiuni-att: ROBOT_MISC_ARGS += -X -i sanity $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-multiuni-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTI_UNI_SINGLE_PON_FILE) |
| sanity-kind-multiuni-att: ROBOT_FILE := Voltha_PODTests.robot |
| sanity-kind-multiuni-att: voltha-test |
| |
| # ATT Multi-UNI Functional Suite Target |
| functional-single-kind-multiuni-att: ROBOT_MISC_ARGS += -X -i sanityORmulti-uni $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind-multiuni-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTI_UNI_SINGLE_PON_FILE) |
| functional-single-kind-multiuni-att: ROBOT_FILE := Voltha_PODTests.robot |
| functional-single-kind-multiuni-att: voltha-test |
| |
| # for scale pipeline |
| voltha-scale: ROBOT_MISC_ARGS += -i activation -v NAMESPACE:voltha $(ROBOT_DEBUG_LOG_OPT) |
| voltha-scale: voltha-scale-test |
| |
| # for onu-upgrade scale pipeline |
| # Requirement: Pass ONU image details in following parameters |
| # image_version, image_url, image_vendor, image_activate_on_success, image_commit_on_success, image_crc |
| voltha-scale-onu-upgrade: ROBOT_MISC_ARGS += -i setup -i activation -i onu-upgrade -v NAMESPACE:voltha -v image_version:BBSM_IMG_00002 -v image_url:http://bbsim0:50074/images/software-image.img -v image_vendor:BBSM -v image_activate_on_success:false -v image_commit_on_success:false -v image_crc:0 $(ROBOT_DEBUG_LOG_OPT) |
| voltha-scale-onu-upgrade: voltha-scale-test |
| |
| # target to invoke DT Workflow Sanity |
| sanity-kind-dt: ROBOT_MISC_ARGS += -i sanityDt $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| sanity-kind-dt: ROBOT_FILE := Voltha_DT_PODTests.robot |
| sanity-kind-dt: voltha-dt-test |
| |
| # target to invoke DT Workflow Sanity for VGC |
| sanity-kind-dt-vgc: ROBOT_MISC_ARGS += -i sanityDt $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-dt-vgc: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE_VGC) |
| sanity-kind-dt-vgc: ROBOT_FILE := Voltha_DT_PODTests_VGC.robot |
| sanity-kind-dt-vgc: voltha-dt-test |
| |
| # target to invoke DT FTTB Workflow Sanity |
| sanity-kind-dt-fttb: ROBOT_MISC_ARGS += -i sanityDtFttb $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-dt-fttb: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_FTTB_SINGLE_PON_FILE) |
| sanity-kind-dt-fttb: ROBOT_FILE := Voltha_DT_FTTB_Tests.robot |
| sanity-kind-dt-fttb: voltha-dt-test |
| |
| # target to invoke DT FTTB Workflow Sanity for VGC |
| sanity-kind-dt-fttb-vgc: ROBOT_MISC_ARGS += -i sanityDtFttb $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-dt-fttb-vgc: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_FTTB_SINGLE_PON_FILE_VGC) |
| sanity-kind-dt-fttb-vgc: ROBOT_FILE := Voltha_DT_FTTB_Tests_VGC.robot |
| sanity-kind-dt-fttb-vgc: voltha-dt-test |
| |
| functional-single-kind: ROBOT_MISC_ARGS += -i sanityORfunctional -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| functional-single-kind: bbsim-kind |
| |
| # to simplify ci |
| functional-single-kind-att: functional-single-kind |
| |
| # target to invoke DT Workflow Functional scenarios |
| functional-single-kind-dt: ROBOT_MISC_ARGS += -i sanityDtORfunctionalDt -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| functional-single-kind-dt: ROBOT_FILE := Voltha_DT_PODTests.robot |
| functional-single-kind-dt: voltha-dt-test |
| |
| # target to invoke DT Workflow Functional scenarios |
| functional-single-kind-dt-vgc: ROBOT_MISC_ARGS += -i sanityDtORfunctionalDt -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind-dt-vgc: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE_VGC) |
| functional-single-kind-dt-vgc: ROBOT_FILE := Voltha_DT_PODTests_VGC.robot |
| functional-single-kind-dt-vgc: voltha-dt-test |
| |
| |
| # target to invoke TT Workflow Sanity |
| sanity-kind-tt: ROBOT_MISC_ARGS += -i sanityTT $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| sanity-kind-tt: ROBOT_FILE := Voltha_TT_PODTests.robot |
| sanity-kind-tt: voltha-tt-test |
| |
| sanity-kind-tt-maclearning: ROBOT_MISC_ARGS += -i sanityTT -v with_maclearning:True $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tt-maclearning: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| sanity-kind-tt-maclearning: ROBOT_FILE := Voltha_TT_PODTests.robot |
| sanity-kind-tt-maclearning: voltha-tt-test |
| |
| sanity-kind-multiuni-tt: ROBOT_MISC_ARGS += -i sanityTT $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-multiuni-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTI_UNI_SINGLE_PON_FILE) |
| sanity-kind-multiuni-tt: ROBOT_FILE := Voltha_TT_PODTests.robot |
| sanity-kind-multiuni-tt: voltha-tt-test |
| |
| # target to invoke TT Workflow Functional scenarios |
| functional-single-kind-tt: ROBOT_MISC_ARGS += -i sanityTTORfunctionalTT -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| functional-single-kind-tt: ROBOT_FILE := Voltha_TT_PODTests.robot |
| functional-single-kind-tt: voltha-tt-test |
| |
| functional-single-kind-multiuni-tt: ROBOT_MISC_ARGS += -i sanityTTORfunctionalTT -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind-multiuni-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTI_UNI_SINGLE_PON_FILE) |
| functional-single-kind-multiuni-tt: ROBOT_FILE := Voltha_TT_PODTests.robot |
| functional-single-kind-multiuni-tt: voltha-tt-test |
| |
| # target to invoke TIM Workflow Sanity |
| sanity-kind-tim: ROBOT_MISC_ARGS += -i sanityTIM $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tim: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TIM_SINGLE_PON_FILE) |
| sanity-kind-tim: ROBOT_FILE := Voltha_TIM_PODTests.robot |
| sanity-kind-tim: voltha-tim-test |
| |
| sanity-kind-tim-multi-onu: ROBOT_MISC_ARGS += -i sanityTIM $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tim-multi-onu: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TIM_SINGLE_PON_MULTI_ONU_FILE) |
| sanity-kind-tim-multi-onu: ROBOT_FILE := Voltha_TIM_PODTests.robot |
| sanity-kind-tim-multi-onu: voltha-tim-test |
| |
| sanity-kind-tim-multi-pon-multi-onu: ROBOT_MISC_ARGS += -i sanityTIM $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tim-multi-pon-multi-onu: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TIM_MULTI_PON_MULTI_ONU_FILE) |
| sanity-kind-tim-multi-pon-multi-onu: ROBOT_FILE := Voltha_TIM_PODTests.robot |
| sanity-kind-tim-multi-pon-multi-onu: voltha-tim-test |
| |
| sanity-kind-tim-multi-olt-multi-pon-multi-onu: ROBOT_MISC_ARGS += -i sanityTIM $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tim-multi-olt-multi-pon-multi-onu: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TIM_MULTI_OLT_MULTI_PON_MULTI_ONU_FILE) |
| sanity-kind-tim-multi-olt-multi-pon-multi-onu: ROBOT_FILE := Voltha_TIM_PODTests.robot |
| sanity-kind-tim-multi-olt-multi-pon-multi-onu: voltha-tim-test |
| |
| sanity-kind-tim-mcast: ROBOT_MISC_ARGS += -i sanityTIM-MCast $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tim-mcast: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TIM_MCAST_SINGLE_PON_FILE) |
| sanity-kind-tim-mcast: ROBOT_FILE := Voltha_TIM_PODTests.robot |
| sanity-kind-tim-mcast: voltha-tim-test |
| |
| sanity-kind-tim-mcast-multi-olt-multi-pon-multi-onu: ROBOT_MISC_ARGS += -i sanityTIM-MCast $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tim-mcast-multi-olt-multi-pon-multi-onu: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TIM_MCAST_MULTI_OLT_MULTI_PON_MULTI_ONU_FILE) |
| sanity-kind-tim-mcast-multi-olt-multi-pon-multi-onu: ROBOT_FILE := Voltha_TIM_PODTests.robot |
| sanity-kind-tim-mcast-multi-olt-multi-pon-multi-onu: voltha-tim-test |
| |
| # target to invoke multiple OLTs Functional scenarios |
| functional-multi-olt: ROBOT_MISC_ARGS += -i sanityORfunctional -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-multi-olt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| functional-multi-olt: ROBOT_FILE := Voltha_PODTests.robot |
| functional-multi-olt: voltha-test |
| |
| functional-multiuni-multiolt-att: ROBOT_MISC_ARGS += -X -i sanityORmulti-uni $(ROBOT_DEBUG_LOG_OPT) |
| functional-multiuni-multiolt-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTI_UNI_MULTIPLE_OLT_FILE) |
| functional-multiuni-multiolt-att: ROBOT_FILE := Voltha_PODTests.robot |
| functional-multiuni-multiolt-att: voltha-test |
| |
| # target to invoke test with openonu go adapter applying 1T1GEM tech-profile at single ONU |
| 1t1gem-openonu-go-adapter-test: ROBOT_MISC_ARGS += -v techprofile:1T1GEM |
| 1t1gem-openonu-go-adapter-test: openonu-go-adapter-test |
| |
| # target to invoke test with openonu go adapter applying 1T4GEM tech-profile at single ONU |
| 1t4gem-openonu-go-adapter-test: ROBOT_MISC_ARGS += -v techprofile:1T4GEM |
| 1t4gem-openonu-go-adapter-test: openonu-go-adapter-test |
| |
| # target to invoke test with openonu go adapter applying 1T8GEM tech-profile at single ONU |
| 1t8gem-openonu-go-adapter-test: ROBOT_MISC_ARGS += -v techprofile:1T8GEM |
| 1t8gem-openonu-go-adapter-test: openonu-go-adapter-test |
| |
| # target to invoke openonu go adapter |
| openonu-go-adapter-test: ROBOT_MISC_ARGS += -v state2test:omci-flows-pushed -v testmode:SingleStateTime |
| openonu-go-adapter-test: ROBOT_MISC_ARGS += -i sanityOnuGo -i functionalOnuGo |
| openonu-go-adapter-test: ROBOT_MISC_ARGS += -e notreadyOnuGo $(ROBOT_DEBUG_LOG_OPT) |
| openonu-go-adapter-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| openonu-go-adapter-test: ROBOT_FILE := Voltha_ONUStateTests.robot |
| openonu-go-adapter-test: openonu-go-adapter-tests |
| |
| # target to invoke bbf adapter |
| bbf-adapter: ROBOT_MISC_ARGS += -i sanityBbfAdapter $(ROBOT_DEBUG_LOG_OPT) |
| bbf-adapter: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_BBF_ADPATER_SINGLE_PON_FILE) |
| bbf-adapter: ROBOT_FILE := Voltha_BBF_Adapter_Tests.robot |
| bbf-adapter: voltha-bbf-adapter-test |
| |
| bbf-adapter-functionality: ROBOT_MISC_ARGS += -i bbfAdapterFunctionality $(ROBOT_DEBUG_LOG_OPT) |
| bbf-adapter-functionality: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_BBF_ADPATER_ADD_DELETE_FILE) |
| bbf-adapter-functionality: ROBOT_FILE := Voltha_BBF_Adapter_Tests.robot |
| bbf-adapter-functionality: voltha-bbf-adapter-test |
| |
| bbf-adapter-functionality-single: ROBOT_MISC_ARGS += -i bbfAdapterFunctionalitySingleTest $(ROBOT_DEBUG_LOG_OPT) |
| bbf-adapter-functionality-single: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_BBF_ADPATER_ADD_DELETE_FILE) |
| bbf-adapter-functionality-single: ROBOT_FILE := Voltha_BBF_Adapter_Tests.robot |
| bbf-adapter-functionality-single: voltha-bbf-adapter-test |
| |
| # target to invoke test with openonu go adapter applying MIB-Upload-Templating |
| mib-upload-templating-openonu-go-adapter-test: ROBOT_MISC_ARGS += -i functionalOnuGo |
| mib-upload-templating-openonu-go-adapter-test: ROBOT_MISC_ARGS += -e notreadyOnuGo $(ROBOT_DEBUG_LOG_OPT) |
| mib-upload-templating-openonu-go-adapter-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULT_PON_FILE) |
| mib-upload-templating-openonu-go-adapter-test: ROBOT_FILE := Voltha_ONUTemplateTests.robot |
| mib-upload-templating-openonu-go-adapter-test: openonu-go-adapter-tests |
| |
| # target to invoke test with openonu go adapter applying 1T8GEM tech-profile at single ONU with OMCI hardening |
| # timeout is determined for omci_response_rate=9 and omci_timeout=1s |
| openonu-go-adapter-omci-hardening-passed-test: ROBOT_MISC_ARGS += -v timeout:180s -v techprofile:1T8GEM |
| openonu-go-adapter-omci-hardening-passed-test: openonu-go-adapter-test |
| |
| # target to invoke openonu go adapter failed state test at single ONU with OMCI hardening |
| # test should show in case of too small omci_response_rate (<=7) in BBSIM that OMCI hardening does not work |
| # test is PASS when ONU does not leave state 'starting-openomci' |
| openonu-go-adapter-omci-hardening-failed-test: ROBOT_MISC_ARGS += -v timeout:300s -i NegativeStateTestOnuGo |
| openonu-go-adapter-omci-hardening-failed-test: ROBOT_MISC_ARGS += -e notreadyOnuGo $(ROBOT_DEBUG_LOG_OPT) |
| openonu-go-adapter-omci-hardening-failed-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| openonu-go-adapter-omci-hardening-failed-test: ROBOT_FILE := Voltha_ONUNegativeStateTests.robot |
| openonu-go-adapter-omci-hardening-failed-test: openonu-go-adapter-tests |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU with ATT workflow (default workflow) |
| reconcile-openonu-go-adapter-test-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| reconcile-openonu-go-adapter-test-att: reconcile-openonu-go-adapter-tests-att |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU with DT workflow |
| reconcile-openonu-go-adapter-test-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| reconcile-openonu-go-adapter-test-dt: reconcile-openonu-go-adapter-tests-dt |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU with TT workflow |
| reconcile-openonu-go-adapter-test-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| reconcile-openonu-go-adapter-test-tt: reconcile-openonu-go-adapter-tests-tt |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU multi UNI with TT workflow |
| reconcile-openonu-go-adapter-multi-uni-test-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTI_UNI_SINGLE_PON_FILE) |
| reconcile-openonu-go-adapter-multi-uni-test-tt: ROBOT_MISC_ARGS += -v unitag_sub:True |
| reconcile-openonu-go-adapter-multi-uni-test-tt: reconcile-openonu-go-adapter-tests-tt |
| |
| # target to invoke reconcile tests with openonu go adapter with multiple OLTs scenario with ATT workflow (default workflow) |
| reconcile-openonu-go-adapter-multi-olt-test-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| reconcile-openonu-go-adapter-multi-olt-test-att: reconcile-openonu-go-adapter-tests-att |
| |
| # target to invoke reconcile tests with openonu go adapter with multiple OLTs scenario with DT workflow |
| reconcile-openonu-go-adapter-multi-olt-test-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_MULTIPLE_OLT_FILE) |
| reconcile-openonu-go-adapter-multi-olt-test-dt: reconcile-openonu-go-adapter-tests-dt |
| |
| # target to invoke reconcile tests with openonu go adapter with multiple OLTs scenario with TT workflow |
| reconcile-openonu-go-adapter-multi-olt-test-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTIPLE_OLT_FILE) |
| reconcile-openonu-go-adapter-multi-olt-test-tt: reconcile-openonu-go-adapter-tests-tt |
| |
| # target to invoke reconcile tests with openonu go adapter with multiple OLTs multi UNI scenario with TT workflow |
| reconcile-openonu-go-adapter-multi-olt-multi-uni-test-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTI_UNI_MULTIPLE_OLT_FILE) |
| reconcile-openonu-go-adapter-multi-olt-multi-uni-test-tt: ROBOT_MISC_ARGS += -v unitag_sub:True |
| reconcile-openonu-go-adapter-multi-olt-multi-uni-test-tt: reconcile-openonu-go-adapter-tests-tt |
| |
| # target to invoke reconcile tests with openonu go adapter with ATT workflow |
| reconcile-openonu-go-adapter-tests-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| reconcile-openonu-go-adapter-tests-att: reconcile-openonu-go-adapter-tests |
| |
| # target to invoke reconcile tests with openonu go adapter with DT workflow |
| reconcile-openonu-go-adapter-tests-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| reconcile-openonu-go-adapter-tests-dt: reconcile-openonu-go-adapter-tests |
| |
| # target to invoke reconcile tests with openonu go adapter with TT workflow |
| reconcile-openonu-go-adapter-tests-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| reconcile-openonu-go-adapter-tests-tt: reconcile-openonu-go-adapter-tests |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU resp. multiple OLTs |
| reconcile-openonu-go-adapter-tests: ROBOT_MISC_ARGS += -i functionalOnuGo |
| reconcile-openonu-go-adapter-tests: ROBOT_MISC_ARGS += -e notreadyOnuGo $(ROBOT_DEBUG_LOG_OPT) |
| reconcile-openonu-go-adapter-tests: ROBOT_FILE := Voltha_ONUReconcileTests.robot |
| reconcile-openonu-go-adapter-tests: openonu-go-adapter-tests |
| |
| # target to invoke test with openonu go adapter applying 1T1GEM tech-profile with multiple OLTs scenarios with ATT workflow |
| 1t1gem-openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v techprofile:1T1GEM |
| 1t1gem-openonu-go-adapter-multi-olt-test: openonu-go-adapter-multi-olt-test |
| |
| # target to invoke test with openonu go adapter applying 1T4GEM tech-profile with multiple OLTs scenarios with ATT workflow |
| 1t4gem-openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v techprofile:1T4GEM |
| 1t4gem-openonu-go-adapter-multi-olt-test: openonu-go-adapter-multi-olt-test |
| |
| # target to invoke test with openonu go adapter applying 1T8GEM tech-profile with multiple OLTs scenarios with ATT workflow |
| 1t8gem-openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v techprofile:1T8GEM |
| 1t8gem-openonu-go-adapter-multi-olt-test: openonu-go-adapter-multi-olt-test |
| |
| # target to invoke test with openonu go adapter (applying 1T1GEM tech-profile) with multiple OLTs scenarios with ATT workflow |
| openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v state2test:omci-flows-pushed -v testmode:SingleStateTime |
| openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -i sanityOnuGo -i functionalOnuGo |
| openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -e notreadyOnuGo $(ROBOT_DEBUG_LOG_OPT) |
| openonu-go-adapter-multi-olt-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| openonu-go-adapter-multi-olt-test: ROBOT_FILE := Voltha_ONUStateTests.robot |
| openonu-go-adapter-multi-olt-test: openonu-go-adapter-tests |
| |
| sanity-single-kind: ROBOT_MISC_ARGS += -i sanity $(ROBOT_DEBUG_LOG_OPT) |
| sanity-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| sanity-single-kind: bbsim-kind |
| |
| sanity-bbsim-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| sanity-bbsim-att: sanity-bbsim |
| |
| sanity-bbsim-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| sanity-bbsim-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| sanity-bbsim-dt: ROBOT_FILE := Voltha_BBSimTests.robot |
| sanity-bbsim-dt: voltha-bbsim-test |
| |
| sanity-bbsim-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| sanity-bbsim-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| sanity-bbsim-tt: ROBOT_FILE := Voltha_BBSimTests.robot |
| sanity-bbsim-tt: voltha-bbsim-test |
| |
| sanity-bbsim: ROBOT_MISC_ARGS += -i bbsimSanity $(ROBOT_DEBUG_LOG_OPT) |
| sanity-bbsim: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| sanity-bbsim: ROBOT_FILE := Voltha_BBSimTests.robot |
| sanity-bbsim: voltha-bbsim-test |
| |
| voltha-bbsim-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/bbsim ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| rwcore-restart-single-kind: ROBOT_MISC_ARGS += -X -i functionalANDrwcore-restart $(ROBOT_DEBUG_LOG_OPT) |
| rwcore-restart-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_FAIL_SINGLE_PON_FILE) |
| rwcore-restart-single-kind: ROBOT_FILE := Voltha_FailureScenarios.robot |
| rwcore-restart-single-kind: voltha-test |
| |
| single-kind: ROBOT_MISC_ARGS += -X -i $(TEST_TAGS) $(ROBOT_DEBUG_LOG_OPT) |
| single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| single-kind: ROBOT_FILE := Voltha_PODTests.robot |
| single-kind: voltha-test |
| |
| sanity-multi-kind: ROBOT_MISC_ARGS += -i sanity $(ROBOT_DEBUG_LOG_OPT) |
| sanity-multi-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULT_PON_FILE) |
| sanity-multi-kind: bbsim-kind |
| |
| functional-multi-kind: ROBOT_MISC_ARGS += -i sanityORfunctional $(ROBOT_DEBUG_LOG_OPT) |
| functional-multi-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULT_PON_FILE) |
| functional-multi-kind: bbsim-kind |
| |
| bbsim-kind: ROBOT_MISC_ARGS += -X |
| bbsim-kind: ROBOT_FILE := Voltha_PODTests.robot |
| bbsim-kind: voltha-test |
| |
| scale-single-kind: ROBOT_MISC_ARGS += -i active $(ROBOT_DEBUG_LOG_OPT) |
| scale-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SCALE_SINGLE_PON_FILE) |
| scale-single-kind: bbsim-scale-kind |
| |
| scale-multi-kind: ROBOT_MISC_ARGS += -i active $(ROBOT_DEBUG_LOG_OPT) |
| scale-multi-kind: ROBOT_CONFIG_FILE := $(ROBOT_SCALE_MULT_PON_FILE) |
| scale-multi-kind: bbsim-scale-kind |
| |
| bbsim-scale-kind: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-scale-kind: ROBOT_FILE := Voltha_ScaleFunctionalTests.robot |
| bbsim-scale-kind: voltha-test |
| |
| #Only supported in full mode |
| system-scale-test: ROBOT_FILE := K8S_SystemTest.robot |
| system-scale-test: ROBOT_MISC_ARGS += -X -i functional $(ROBOT_DEBUG_LOG_OPT) -v teardown_device:True |
| system-scale-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULT_PON_FILE) |
| system-scale-test: voltha-test |
| |
| failure-test: ROBOT_MISC_ARGS += -X -i FailureTest $(ROBOT_DEBUG_LOG_OPT) |
| failure-test: ROBOT_FILE := K8S_SystemTest.robot |
| failure-test: ROBOT_CONFIG_FILE := $(ROBOT_FAIL_SINGLE_PON_FILE) |
| failure-test: voltha-test |
| |
| bbsim-alarms-kind: ROBOT_MISC_ARGS += -X -i active |
| bbsim-alarms-kind: ROBOT_FILE := Voltha_AlarmTests.robot |
| bbsim-alarms-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| bbsim-alarms-kind: voltctl-docker-image-build voltctl-docker-image-install-kind voltha-test |
| |
| bbsim-errorscenarios: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-errorscenarios: ROBOT_FILE := Voltha_ErrorScenarios.robot |
| bbsim-errorscenarios: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| bbsim-errorscenarios: voltha-test |
| |
| bbsim-multiuni-errorscenarios-att: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-multiuni-errorscenarios-att: ROBOT_FILE := Voltha_ErrorScenarios.robot |
| bbsim-multiuni-errorscenarios-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTI_UNI_SINGLE_PON_FILE) |
| bbsim-multiuni-errorscenarios-att: voltha-test |
| |
| bbsim-multiolt-errorscenarios: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-multiolt-errorscenarios: ROBOT_FILE := Voltha_ErrorScenarios.robot |
| bbsim-multiolt-errorscenarios: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| bbsim-multiolt-errorscenarios: voltha-test |
| |
| bbsim-multiuni-multiolt-errorscenarios-att: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-multiuni-multiolt-errorscenarios-att: ROBOT_FILE := Voltha_ErrorScenarios.robot |
| bbsim-multiuni-multiolt-errorscenarios-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTI_UNI_MULTIPLE_OLT_FILE) |
| bbsim-multiuni-multiolt-errorscenarios-att: voltha-test |
| |
| bbsim-errorscenarios-dt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-errorscenarios-dt: ROBOT_FILE := Voltha_ErrorScenarios.robot |
| bbsim-errorscenarios-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| bbsim-errorscenarios-dt: voltha-test |
| |
| bbsim-failurescenarios: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e PhysicalOLTReboot |
| bbsim-failurescenarios: ROBOT_FILE := Voltha_FailureScenarios.robot |
| bbsim-failurescenarios: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| bbsim-failurescenarios: voltha-test |
| |
| bbsim-multiuni-failurescenarios-att: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e PhysicalOLTReboot |
| bbsim-multiuni-failurescenarios-att: ROBOT_FILE := Voltha_FailureScenarios.robot |
| bbsim-multiuni-failurescenarios-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTI_UNI_SINGLE_PON_FILE) |
| bbsim-multiuni-failurescenarios-att: voltha-test |
| |
| bbsim-multiolt-failurescenarios: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e PhysicalOLTReboot |
| bbsim-multiolt-failurescenarios: ROBOT_FILE := Voltha_FailureScenarios.robot |
| bbsim-multiolt-failurescenarios: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| bbsim-multiolt-failurescenarios: voltha-test |
| |
| bbsim-multiuni-multiolt-failurescenarios-att: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e PhysicalOLTReboot |
| bbsim-multiuni-multiolt-failurescenarios-att: ROBOT_FILE := Voltha_FailureScenarios.robot |
| bbsim-multiuni-multiolt-failurescenarios-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTI_UNI_MULTIPLE_OLT_FILE) |
| bbsim-multiuni-multiolt-failurescenarios-att: voltha-test |
| |
| bbsim-multiolt-kind: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e MultiOLTPhysicalReboot |
| bbsim-multiolt-kind: ROBOT_FILE := Voltha_MultiOLT_Tests.robot |
| bbsim-multiolt-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| bbsim-multiolt-kind: voltha-test |
| |
| bbsim-multiolt-kind-dt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e MultiOLTPhysicalRebootDt |
| bbsim-multiolt-kind-dt: ROBOT_FILE := Voltha_DT_MultiOLT_Tests.robot |
| bbsim-multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| bbsim-multiolt-kind-dt: voltha-dt-test |
| |
| bbsim-multiolt-kind-dt-vgc: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e MultiOLTPhysicalRebootDt |
| bbsim-multiolt-kind-dt-vgc: ROBOT_FILE := Voltha_DT_MultiOLT_Tests_VGC.robot |
| bbsim-multiolt-kind-dt-vgc: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE_VGC) |
| bbsim-multiolt-kind-dt-vgc: voltha-dt-test |
| |
| multiolt-kind-dt-vgc: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -i functionalDt |
| multiolt-kind-dt-vgc: ROBOT_FILE := Voltha_DT_MultiOLT_Tests_VGC.robot |
| multiolt-kind-dt-vgc: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE_VGC) |
| multiolt-kind-dt-vgc: voltha-dt-test |
| |
| multiolt-kind-dt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -i functionalDt |
| multiolt-kind-dt: ROBOT_FILE := Voltha_DT_MultiOLT_Tests.robot |
| multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| multiolt-kind-dt: voltha-dt-test |
| |
| bbsim-failurescenarios-dt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitchOnuRebootDt -e PhysicalOltRebootDt |
| bbsim-failurescenarios-dt: ROBOT_FILE := Voltha_DT_FailureScenarios.robot |
| bbsim-failurescenarios-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| bbsim-failurescenarios-dt: voltha-dt-test |
| |
| bbsim-failurescenarios-tt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e PhysicalOltRebootTT -e dataplaneTT |
| bbsim-failurescenarios-tt: ROBOT_FILE := Voltha_TT_FailureScenarios.robot |
| bbsim-failurescenarios-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| bbsim-failurescenarios-tt: voltha-tt-test |
| |
| onos-ha-test: ROBOT_MISC_ARGS += -e notready -X $(ROBOT_DEBUG_LOG_OPT) |
| onos-ha-test: ROBOT_FILE := Voltha_ONOSHATests.robot |
| onos-ha-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| onos-ha-test: voltha-test |
| |
| voltha-test: ROBOT_MISC_ARGS += -e notready --noncritical non-critical |
| |
| voltha-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/functional ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| bbsim-dmi-hw-management-test: ROBOT_MISC_ARGS += -e notreadyDMI -i functionalDMI -e bbsimUnimplementedDMI |
| bbsim-dmi-hw-management-test: ROBOT_FILE := dmi-hw-management.robot |
| bbsim-dmi-hw-management-test: ROBOT_CONFIG_FILE := $(ROBOT_DMI_SINGLE_BBSIM_FILE) |
| bbsim-dmi-hw-management-test: voltha-dmi-test |
| |
| voltha-dmi-hw-management-test: ROBOT_MISC_ARGS += -e notreadyDMI -i functionalDMI |
| voltha-dmi-hw-management-test: ROBOT_FILE := dmi-hw-management.robot |
| voltha-dmi-hw-management-test: ROBOT_CONFIG_FILE := $(ROBOT_DMI_SINGLE_ADTRAN_FILE) |
| voltha-dmi-hw-management-test: voltha-dmi-test |
| |
| voltha-dmi-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/dmi-interface ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| # target to invoke single ONU pm data scenarios in ATT workflow |
| voltha-pm-data-single-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-pm-data-single-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| voltha-pm-data-single-kind-att: voltha-pm-data-tests |
| |
| # target to invoke single ONU pm data scenarios in DT workflow |
| voltha-pm-data-single-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| voltha-pm-data-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| voltha-pm-data-single-kind-dt: voltha-pm-data-tests |
| |
| # target to invoke single ONU pm data scenarios in TT workflow |
| voltha-pm-data-single-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| voltha-pm-data-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| voltha-pm-data-single-kind-tt: voltha-pm-data-tests |
| |
| # target to invoke multiple OLTs pm data scenarios in ATT workflow |
| voltha-pm-data-multiolt-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-pm-data-multiolt-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| voltha-pm-data-multiolt-kind-att: voltha-pm-data-tests |
| |
| # target to invoke multiple OLTs pm data scenarios in DT workflow |
| voltha-pm-data-multiolt-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| voltha-pm-data-multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_MULTIPLE_OLT_FILE) |
| voltha-pm-data-multiolt-kind-dt: voltha-pm-data-tests |
| |
| # target to invoke multiple OLTs pm data scenarios in TT workflow |
| voltha-pm-data-multiolt-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| voltha-pm-data-multiolt-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTIPLE_OLT_FILE) |
| voltha-pm-data-multiolt-kind-tt: voltha-pm-data-tests |
| |
| voltha-pm-data-tests: ROBOT_MISC_ARGS += -i functional -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| voltha-pm-data-tests: ROBOT_PM_CONFIG_FILE := $(ROBOT_PM_DATA_FILE) |
| voltha-pm-data-tests: ROBOT_FILE := Voltha_ONUPMTests.robot |
| voltha-pm-data-tests: voltha-pm-data-test |
| |
| voltha-pm-data-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/pm-data ;\ |
| robot -V $(ROBOT_CONFIG_FILE) -V $(ROBOT_PM_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| # target to invoke single ONU OMCI Get scenarios in ATT workflow |
| voltha-onu-omci-get-single-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-onu-omci-get-single-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| voltha-onu-omci-get-single-kind-att: voltha-onu-omci-get-tests |
| |
| # target to invoke single ONU OMCI Get scenarios in DT workflow |
| voltha-onu-omci-get-single-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| voltha-onu-omci-get-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| voltha-onu-omci-get-single-kind-dt: voltha-onu-omci-get-tests |
| |
| # target to invoke single ONU OMCI Get scenarios in TT workflow |
| voltha-onu-omci-get-single-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| voltha-onu-omci-get-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| voltha-onu-omci-get-single-kind-tt: voltha-onu-omci-get-tests |
| |
| # target to invoke multiple OLTs OMCI Get scenarios in ATT workflow |
| voltha-onu-omci-get-multiolt-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-onu-omci-get-multiolt-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| voltha-onu-omci-get-multiolt-kind-att: voltha-onu-omci-get-tests |
| |
| # target to invoke multiple OLTs OMCI Get scenarios in DT workflow |
| voltha-onu-omci-get-multiolt-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| voltha-onu-omci-get-multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_MULTIPLE_OLT_FILE) |
| voltha-onu-omci-get-multiolt-kind-dt: voltha-onu-omci-get-tests |
| |
| # target to invoke multiple OLTs OMCI Get scenarios in TT workflow |
| voltha-onu-omci-get-multiolt-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| voltha-onu-omci-get-multiolt-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTIPLE_OLT_FILE) |
| voltha-onu-omci-get-multiolt-kind-tt: voltha-onu-omci-get-tests |
| |
| voltha-onu-omci-get-tests: ROBOT_MISC_ARGS += -i functionalOnuGo -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| voltha-onu-omci-get-tests: ROBOT_FILE := Voltha_ONUOmciGetTest.robot |
| voltha-onu-omci-get-tests: openonu-go-adapter-tests |
| |
| # target to invoke single ONU Flows Check in ATT workflow |
| voltha-onu-flows-check-single-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-onu-flows-check-single-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| voltha-onu-flows-check-single-kind-att: voltha-onu-flows-check-tests |
| |
| # target to invoke single ONU Flows Check scenarios in DT workflow |
| voltha-onu-flows-check-single-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT -v techprofile:1T8GEM |
| voltha-onu-flows-check-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| voltha-onu-flows-check-single-kind-dt: voltha-onu-flows-check-tests |
| |
| # target to invoke single ONU Flows Check scenarios in TT workflow |
| voltha-onu-flows-check-single-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT -v techprofile:1T4GEM |
| voltha-onu-flows-check-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| voltha-onu-flows-check-single-kind-tt: voltha-onu-flows-check-tests |
| |
| # target to invoke multiple OLTs Flows Check scenarios in ATT workflow |
| voltha-onu-flows-check-multiolt-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-onu-flows-check-multiolt-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| voltha-onu-flows-check-multiolt-kind-att: voltha-onu-flows-check-tests |
| |
| # target to invoke multiple OLTs Flows Check scenarios in DT workflow |
| voltha-onu-flows-check-multiolt-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT -v techprofile:1T8GEM |
| voltha-onu-flows-check-multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_MULTIPLE_OLT_FILE) |
| voltha-onu-flows-check-multiolt-kind-dt: voltha-onu-flows-check-tests |
| |
| # target to invoke multiple OLTs Flows Check scenarios in TT workflow |
| voltha-onu-flows-check-multiolt-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT -v techprofile:1T4GEM |
| voltha-onu-flows-check-multiolt-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTIPLE_OLT_FILE) |
| voltha-onu-flows-check-multiolt-kind-tt: voltha-onu-flows-check-tests |
| |
| voltha-onu-flows-check-tests: ROBOT_MISC_ARGS += -i functionalOnuGo -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| voltha-onu-flows-check-tests: ROBOT_FILE := Voltha_ONUFlowChecks.robot |
| voltha-onu-flows-check-tests: openonu-go-adapter-tests |
| |
| # ONOS Apps to test for Software Upgrade need to be passed in the 'onos_apps_under_test' variable in format: |
| # <app-name>,<version>,<oar-url>*<app-name>,<version>,<oar-url>* |
| onos-app-upgrade-test: ROBOT_MISC_ARGS += -e notready -i functional |
| onos-app-upgrade-test: ROBOT_FILE := ONOS_AppsUpgrade.robot |
| onos-app-upgrade-test: ROBOT_CONFIG_FILE := $(ROBOT_SW_UPGRADE_FILE) |
| onos-app-upgrade-test: software-upgrade-test |
| |
| # Voltha Components to test for Software Upgrade need to be passed in the 'voltha_comps_under_test' variable in format: |
| # <comp-label>,<comp-container>,<comp-image>*<comp-label>,<comp-container>,<comp-image>* |
| voltha-comp-upgrade-test: ROBOT_MISC_ARGS += -e notready -i VolthaCompMinorVerUpgrade |
| voltha-comp-upgrade-test: ROBOT_FILE := Voltha_ComponentsUpgrade.robot |
| voltha-comp-upgrade-test: ROBOT_CONFIG_FILE := $(ROBOT_SW_UPGRADE_FILE) |
| voltha-comp-upgrade-test: software-upgrade-test |
| |
| # Voltha Components to test for Software Upgrade need to be passed in the 'voltha_comps_under_test' variable in format: |
| # <comp-label>,<comp-container>,<comp-image>*<comp-label>,<comp-container>,<comp-image>* |
| voltha-comp-rolling-upgrade-test: ROBOT_MISC_ARGS += -e notready -i VolthaCompMinorVerRollingUpgrade |
| voltha-comp-rolling-upgrade-test: ROBOT_FILE := Voltha_ComponentsUpgrade.robot |
| voltha-comp-rolling-upgrade-test: ROBOT_CONFIG_FILE := $(ROBOT_SW_UPGRADE_FILE) |
| voltha-comp-rolling-upgrade-test: software-upgrade-test |
| |
| # Requirement: Pass ONU image details in following parameters |
| # image_version, image_url, image_vendor, image_activate_on_success, image_commit_on_success, image_crc |
| onu-upgrade-test: ROBOT_MISC_ARGS += -e notready -i functional |
| onu-upgrade-test: ROBOT_FILE := ONU_Upgrade.robot |
| onu-upgrade-test: ROBOT_CONFIG_FILE := $(ROBOT_SW_UPGRADE_FILE) |
| onu-upgrade-test: software-upgrade-test |
| |
| # Requirement: Pass ONU image details in following parameters |
| # image_version, image_url, image_vendor, image_activate_on_success, image_commit_on_success, image_crc |
| onu-upgrade-test-multiolt-kind-att: ROBOT_MISC_ARGS += -e notready -i functionalMultipleONUs |
| onu-upgrade-test-multiolt-kind-att: ROBOT_FILE := ONU_Upgrade.robot |
| onu-upgrade-test-multiolt-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| onu-upgrade-test-multiolt-kind-att: software-upgrade-test |
| |
| # Voltha openonu MIB Audit tests att workflow single kind |
| onu-mib-audit-test-single-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| onu-mib-audit-test-single-kind-att: voltha-onu-mib-audit-tests |
| |
| # Voltha openonu MIB Audit tests t workflow single kind |
| onu-mib-audit-test-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| onu-mib-audit-test-single-kind-dt: voltha-onu-mib-audit-tests |
| |
| # Voltha openonu MIB Audit tests tt workflow single kind |
| onu-mib-audit-test-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| onu-mib-audit-test-single-kind-tt: voltha-onu-mib-audit-tests |
| |
| # Voltha openonu MIB Audit tests att workflow multiple OLTs |
| onu-mib-audit-test-multiolt-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| onu-mib-audit-test-multiolt-kind-att: voltha-onu-mib-audit-tests |
| |
| # Voltha openonu MIB Audit tests tt workflow multiple OLTs |
| onu-mib-audit-test-multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_MULTIPLE_OLT_FILE) |
| onu-mib-audit-test-multiolt-kind-dt: voltha-onu-mib-audit-tests |
| |
| # Voltha openonu MIB Audit tests tt workflow multiple OLTs |
| onu-mib-audit-test-multiolt-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTIPLE_OLT_FILE) |
| onu-mib-audit-test-multiolt-kind-tt: voltha-onu-mib-audit-tests |
| |
| voltha-onu-mib-audit-tests: ROBOT_MISC_ARGS += -i functional -e notready --noncritical non-critical |
| voltha-onu-mib-audit-tests: ROBOT_MISC_ARGS += $(ROBOT_DEBUG_LOG_OPT) |
| voltha-onu-mib-audit-tests: ROBOT_FILE := Voltha_ONUMibAudit.robot |
| voltha-onu-mib-audit-tests: openonu-go-adapter-tests |
| |
| # Voltha Components Memory Leak tests dt workflow 1 OLT 1 PON 2 ONUs |
| memory-leak-test-single-pon-multi-onu-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_MULTI_ONU_FILE) |
| memory-leak-test-single-pon-multi-onu-dt: voltha-memory-leak-tests |
| |
| voltha-memory-leak-tests: ROBOT_MISC_ARGS += -i functionalMemoryLeak -e notready --noncritical non-critical |
| voltha-memory-leak-tests: ROBOT_MISC_ARGS += $(ROBOT_DEBUG_LOG_OPT) |
| voltha-memory-leak-tests: ROBOT_FILE := VOLTHA_Memory_Leak_Tests.robot |
| voltha-memory-leak-tests: voltha-memory-leak-test |
| |
| # Voltha openonu robustness tests att workflow |
| onu-robustness-test-single-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| onu-robustness-test-single-kind-att: ROBOT_MISC_ARGS += -i functional |
| onu-robustness-test-single-kind-att: voltha-onu-robustness-tests |
| |
| # Voltha openonu robustness tests dt workflow |
| onu-robustness-test-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| onu-robustness-test-single-kind-dt: ROBOT_MISC_ARGS += -i functional |
| onu-robustness-test-single-kind-dt: voltha-onu-robustness-tests |
| |
| # Voltha openonu robustness tests tt workflow |
| onu-robustness-test-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| onu-robustness-test-single-kind-tt: ROBOT_MISC_ARGS += -i functional |
| onu-robustness-test-single-kind-tt: voltha-onu-robustness-tests |
| |
| # Voltha openonu robustness tests multi-uni tt workflow |
| onu-robustness-test-multi-uni-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTI_UNI_SINGLE_PON_FILE) |
| onu-robustness-test-multi-uni-kind-tt: ROBOT_MISC_ARGS += -v unitag_sub:True -i functionalMultiUni |
| onu-robustness-test-multi-uni-kind-tt: voltha-onu-robustness-tests |
| |
| voltha-onu-robustness-tests: ROBOT_MISC_ARGS += -e notready --noncritical non-critical |
| voltha-onu-robustness-tests: ROBOT_MISC_ARGS += $(ROBOT_DEBUG_LOG_OPT) |
| voltha-onu-robustness-tests: ROBOT_FILE := Voltha_ONUErrorTests.robot |
| voltha-onu-robustness-tests: openonu-go-adapter-tests |
| |
| software-upgrade-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/software-upgrades ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-dt-test: ROBOT_MISC_ARGS += -e notready --noncritical non-critical |
| |
| voltha-dt-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/dt-workflow ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-tt-test: ROBOT_MISC_ARGS += -e notready --noncritical non-critical |
| |
| voltha-tt-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/tt-workflow ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-tim-test: ROBOT_MISC_ARGS += -e notready --noncritical non-critical |
| |
| voltha-tim-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/tim-workflow ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-scale-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/scale ;\ |
| robot $(ROBOT_MISC_ARGS) Voltha_Scale_Tests.robot |
| |
| openonu-go-adapter-tests: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/openonu-go-adapter ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-bbf-adapter-test: ROBOT_MISC_ARGS += -e notready --noncritical non-critical |
| voltha-bbf-adapter-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/bbf-adapter ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-memory-leak-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/memory-leak ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| # self-test, lint, and setup targets |
| |
| # ----------------------------------------------------------------------- |
| # virtualenv for the robot tools |
| # VOL-2724 Invoke pip via python3 to avoid pathname too long on QA jobs |
| # Verify installation: make lint -or- make test |
| # vol-4874 - python_310_migration.sh |
| # ----------------------------------------------------------------------- |
| vst_venv: |
| @echo "=============================" |
| @echo "Installing python virtual env" |
| @echo "=============================" |
| virtualenv -p python3 $@ ;\ |
| source ./$@/bin/activate ;\ |
| python -m pip install -r requirements.txt |
| @echo |
| @echo "========================================" |
| @echo "Applying python 3.10.x migration patches" |
| @echo "========================================" |
| ./patches/python_310_migration.sh 'apply' |
| @echo |
| |
| ##----------------## |
| ##---] TEST [---## |
| ##----------------## |
| test: lint |
| |
| # tidy target will be more useful once issue with removing leading comments |
| # is resolved: https://github.com/robotframework/robotframework/issues/3263 |
| tidy-robot: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| python -m robot.tidy --inplace $(ROBOT_FILES); |
| |
| ## Variables for gendocs |
| TEST_SOURCE := $(wildcard tests/*/*.robot) |
| TEST_BASENAME := $(basename $(TEST_SOURCE)) |
| TEST_DIRS := $(dir $(TEST_SOURCE)) |
| |
| LIB_SOURCE := $(wildcard libraries/*.robot) |
| LIB_BASENAME := $(basename $(LIB_SOURCE)) |
| LIB_DIRS := $(sort $(dir $(LIB_SOURCE))) |
| |
| .PHONY: gendocs lint test |
| # In future explore use of --docformat REST - integration w/Sphinx? |
| gendocs: vst_venv |
| $(HIDE)echo " ** $(make) $@: ENTER" |
| source ./$</bin/activate \ |
| && set -u \ |
| && echo \ |
| && echo " ** $(make) $@: robot.libdoc" \ |
| && mkdir -pv $(addprefix $@/,$(LIB_DIRS)) \ |
| && for dir in $(LIB_BASENAME); do\ |
| python -m robot.libdoc --format HTML $$dir.robot $@/$$dir.html ;\ |
| done \ |
| && echo \ |
| && echo " ** $(make) $@: robot.testdoc" \ |
| && mkdir -vp $(addprefix $@/,$(TEST_DIRS)) \ |
| && for dir in $(TEST_BASENAME); do\ |
| python -m robot.testdoc $$dir.robot $@/$$dir.html ;\ |
| done |
| $(HIDE)echo " ** $(make) $@: LEAVE" |
| |
| ## ----------------------------------------------------------------------- |
| ## ----------------------------------------------------------------------- |
| clean: |
| $(RM) -r gendocs |
| find . -name output.xml -print # no action performed ? |
| |
| clean-all sterile: clean |
| $(RM) -r vst_venv |
| |
| ## ----------------------------------------------------------------------- |
| ## ----------------------------------------------------------------------- |
| voltctl-docker-image-build: |
| cd docker && docker build -t opencord/voltctl:local -f Dockerfile.voltctl . |
| |
| voltctl-docker-image-install-kind: |
| @if [ "`kind get clusters | grep kind`" = '' ]; then echo "no kind cluster found" && exit 1; fi |
| kind load docker-image --name `kind get clusters | grep kind` opencord/voltctl:local |
| |
| # [EOF] |