| # Copyright 2020-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Library for testing dmi interface (hw_management_service.proto) |
| Library Process |
| Library grpc_robot.Dmi WITH NAME dmi1 |
| Library grpc_robot.Collections WITH NAME tools |
| Library kafka_robot.KafkaClient WITH NAME kafka |
| Library Collections |
| Library BuiltIn |
| Library ../../libraries/utility.py WITH NAME utility |
| Resource ../../libraries/dmi-basics.robot |
| Variables ../../variables/variables.py |
| Suite Setup Suite Setup |
| Suite Teardown Suite Teardown |
| |
| *** Variables *** |
| ${DEVICEMANAGER_IP} ${GIVEN_DM_IP} |
| ${DEVICEMANAGER_PORT} ${GIVEN_DM_PORT} |
| ${OLT_IP} ${GIVEN_OLT_IP} |
| ${OLT_NAME} ${GIVEN_OLT_NAME} |
| |
| ${has_dataplane} True |
| |
| *** Test Cases *** |
| Start and Stop Managing Device In Device Manager |
| [Documentation] add/remove device in device manager (testcase is done by Suite Setup and Suite Teardown) |
| [Tags] sanityDMI functionalDMI EnableOltDMI |
| # this tescase exist, to have the possiblity to check only the Start-/Stop-ManagingDevice |
| # can be run via adding parameter ("-t add and remove device in device manager") to the robot call! |
| No Operation |
| |
| Get Inventory Data |
| [Documentation] get physical inventory data from OLT |
| [Tags] functionalDMI GetInventoryDataDMI |
| &{PhyInvReq}= Evaluate {'device_uuid':${suite_device_uuid}} |
| ${inventory}= dmi1.Hw Management Service Get Physical Inventory ${PhyInvReq} |
| Check Dmi Status ${inventory}[0] OK_STATUS |
| FOR ${component} IN @{dm_components} |
| Log ${component} |
| Check Physical Inventory ${inventory} ${component} |
| END |
| |
| Get Set Configurable Component Inventory Info |
| [Documentation] get physical component info of all hw in given yaml file |
| [Tags] functionalDMI GetSetConfigurableComponentInventoryInfoDMI |
| &{PhyInvReq}= Evaluate {'device_uuid':${suite_device_uuid}} |
| ${inventory}= dmi1.Hw Management Service Get Physical Inventory ${PhyInvReq} |
| Check Dmi Status ${inventory}[0] OK_STATUS |
| FOR ${component} IN @{dm_components} |
| Log ${component} |
| ${component_name}= Convert To String ${component['name']} |
| ${component_uuid}= Get Component Uuid From Inventory ${inventory} ${component_name} |
| ${hwComInfoReq}= Create Dictionary device_uuid=${suite_device_uuid} component_uuid=${component_uuid} |
| Set To Dictionary ${hwComInfoReq} component_name=${component_name} |
| ${hwComInfoRes}= dmi1.Hw Management Service Get Hw Component Info ${hwComInfoReq} |
| ${hwComInfoRes}= Get From List ${hwComInfoRes} 0 |
| Check Dmi Status ${hwComInfoRes} OK_STATUS |
| ${res_component}= Get From Dictionary ${hwComInfoRes} component |
| ${value_name}= Get From Dictionary ${res_component} name |
| Should be Equal ${value_name} ${component_name} |
| # Try setting 'name' field |
| # (for BBSim the set api is not implemented) |
| # (for Physical Pod 'modifying component names is not supported') |
| ${set_name_status}= Set Variable If ${has_dataplane} ERROR_STATUS UNIMPLEMENTED |
| Set Component Inventory Info |
| ... ${suite_device_uuid} ${component_uuid} ${component_name} name new-value ${set_name_status} |
| # Try setting 'alias' (any, other than name) field (for BBSim the set api is not implemented) |
| ${set_alias_status}= Set Variable If ${has_dataplane} OK_STATUS UNIMPLEMENTED |
| Set Component Inventory Info |
| ... ${suite_device_uuid} ${component_uuid} ${component_name} alias ${component_name} ${set_alias_status} |
| # Reset alias field |
| Set Component Inventory Info |
| ... ${suite_device_uuid} ${component_uuid} ${component_name} alias ${None} ${set_alias_status} |
| END |
| |
| Get Loggable Entities |
| [Documentation] get the loggable entities of the device |
| [Tags] functionalDMI GetLoggableEntitiesDMI bbsimUnimplementedDMI |
| ${loggable_entities}= Loggable Entities dmi1 ${suite_device_uuid} |
| ${size_loggable_entities}= Get Length ${loggable_entities} |
| Should Be True ${size_loggable_entities} > 5 |
| |
| Set Get Logging Endpoint |
| [Documentation] set/get the loggable endpoint of a device |
| [Tags] functionalDMI SetGetLoggingEndpointDMI bbsimUnimplementedDMI |
| ${defined_endpoint}= Set Variable 127.0.0.1 |
| ${defined_protocol}= Set Variable udp |
| Set Log Endpoint dmi1 ${suite_device_uuid} ${defined_endpoint} ${defined_protocol} |
| # now the new logging endpoint and protocol should be set! |
| ${uuid}= Evaluate {'uuid':${suite_device_uuid}} |
| ${log_endpoint}= dmi1.Hw Management Service Get Logging Endpoint ${uuid} |
| Check Dmi Status ${log_endpoint} OK_STATUS |
| ${get_endpoint}= Get From Dictionary ${log_endpoint} logging_endpoint |
| ${get_protocol}= Get From Dictionary ${log_endpoint} logging_protocol |
| Should Be Equal ${get_endpoint} ${defined_endpoint} |
| Should Be Equal ${get_protocol} ${defined_protocol} |
| # remove logging endpoint |
| ${defined_endpoint}= Set Variable |
| ${defined_protocol}= Set Variable |
| Set Log Endpoint dmi1 ${suite_device_uuid} ${defined_endpoint} ${defined_protocol} |
| |
| Set Get LogLevel |
| [Documentation] set and get the log level of a device |
| [Tags] functionalDMI SetGetLogLevelDMI skipped bbsimUnimplementedDMI |
| ${loggable_entities}= Get X Loggable Entities dmi1 ${suite_device_uuid} 2 |
| ${size}= GetLength ${loggable_entities} |
| Should Be True ${size} >= 2 |
| # set new loglevel |
| Set Logging Level dmi1 ${suite_device_uuid} ${loggable_entities} ERROR |
| # get the loglevel |
| ${log_list}= Create List |
| ${entity}= Set Variable ${loggable_entities}[0][entities] |
| FOR ${log_entity} IN @{entity} |
| Append To List ${log_list} ${log_entity} |
| END |
| ${entity}= Set Variable ${loggable_entities}[1][entities] |
| FOR ${log_entity} IN @{entity} |
| Append To List ${log_list} ${log_entity} |
| END |
| ${loglvl_request}= Evaluate {'device_uuid':${suite_device_uuid}, 'entities':${log_list}} |
| ${response}= dmi1.Hw Management Service Get Log Level ${loglvl_request} |
| Check Dmi Status ${response} OK_STATUS |
| FOR ${counter} IN RANGE 0 2 |
| Should Be True '${response}[logLevels][${counter}][logLevel]' == 'ERROR' |
| END |
| # set loglevel back to default |
| Set Logging Level dmi1 ${suite_device_uuid} ${loggable_entities} WARN |
| |
| *** Keywords *** |
| Suite Setup |
| [Documentation] start a managed device in the device manager |
| dmi1.Connection Open ${DEVICEMANAGER_IP} ${DEVICEMANAGER_PORT} |
| ${suite_device_uuid}= Start Managing Device dmi1 ${OLT_IP} ${OLT_NAME} |
| ${suite_device_name}= Evaluate {'name':'${OLT_NAME}'} |
| Set Suite Variable ${suite_device_uuid} |
| Set Suite Variable ${suite_device_name} |
| |
| Suite Teardown |
| [Documentation] stop a managed device in device manager |
| Stop Managing Device dmi1 ${OLT_NAME} |
| dmi1.Connection Close |
| Search For Managed Devices And Stop Managing It dmi1 |
| |
| Check Physical Inventory |
| [Documentation] This keyword checks the passed inventory data |
| [Arguments] ${inventory} ${component} |
| FOR ${inventory_element} IN @{inventory} |
| log ${inventory_element} |
| Check Inventory Element ${inventory_element} ${component} |
| END |
| |
| Check Inventory Element |
| [Documentation] This keyword checks the passed element data |
| [Arguments] ${inventory_element} ${component} |
| FOR ${component_element} IN @{component['elements']} |
| log ${component_element} |
| ${result}= utility.check_Inventory_Element ${inventory_element} ${component['name']} |
| ... ${component_element['element']} ${component_element['value']} |
| Should be True ${result} |
| END |
| |
| Get Component Uuid From Inventory |
| [Documentation] This keyword delivers component-uuid from inventory of passed component-name |
| [Arguments] ${inventory} ${component_name} |
| FOR ${element} IN @{inventory} |
| Log ${element} |
| ${component_uuid}= utility.get_uuid_from_Inventory_Element ${element} ${component_name} |
| END |
| Should Not Be Equal ${None} ${component_uuid} Could not find UUID for ${component_name} |
| [Return] ${component_uuid} |
| |
| Loggable Entities |
| [Documentation] get the loggable entities of a device |
| [Arguments] ${lib_instance} ${uuid} ${with_check}=${TRUE} |
| ${device_uuid}= Evaluate {'device_uuid':${uuid}} |
| ${response}= Run Keyword ${lib_instance}.Hw Management Service Get Loggable Entities ${device_uuid} |
| ${state}= Get From Dictionary ${response} status |
| Run Keyword If ${with_check} == ${True} Should Be Equal ${state} OK_STATUS |
| ${response_uuid}= Get From Dictionary ${response} device_uuid |
| Run Keyword If ${with_check} == ${True} Should Be Equal ${uuid} ${response_uuid} |
| ${is_loglevels_in}= Run Keyword And Return Status Dictionary Should Contain Key ${response} logLevels |
| ${loggable_entities}= Run Keyword If ${is_loglevels_in}==${True} Get From Dictionary ${response} logLevels |
| ... ELSE Create Dictionary |
| [Return] ${loggable_entities} |
| |
| Get X Loggable Entities |
| [Documentation] get x (at least!) loggable entities and their loglevel of a device back to the user |
| [Arguments] ${lib_instance} ${uuid} ${number_entities}=5000 ${with_check}=${TRUE} |
| ${loggable_entities}= Loggable Entities ${lib_instance} ${suite_device_uuid} ${with_check} |
| ${entities2}= Create Dictionary |
| ${entities}= Create List |
| ${counter}= Set Variable ${1} |
| FOR ${entry} IN @{loggable_entities} |
| Append To List ${entities} ${entry} |
| Exit For Loop If ${number_entities}==${counter} |
| ${counter}= Set Variable ${counter+1} |
| END |
| [Return] ${entities} |
| |
| Set Component Inventory Info |
| [Documentation] This keyword sets a new value |
| [Arguments] ${uuid} ${component_uuid} ${component_name} ${component_field} ${new_value} ${status_code} |
| ${modifiableComp}= Evaluate {'${component_field}':'${new_value}'} |
| ${HWCompSetReq}= Create Dictionary device_uuid=${uuid} component_uuid=${component_uuid} |
| Set To Dictionary ${HWCompSetReq} component_name=${component_name} changes=${modifiableComp} |
| ${state} ${response} Run Keyword And Ignore Error |
| ... dmi1.Hw Management Service Set Hw Component Info ${HWCompSetReq} |
| Log ${response} |
| Run Keyword If '${state}'=='FAIL' Should Contain ${response} StatusCode.${status_code} |
| ... ELSE Check Dmi Status ${response} ${status_code} |
| |
| Set Logging Level |
| [Documentation] set the given loglevel in device |
| [Arguments] ${lib_instance} ${uuid} ${loggable_entities} ${log_level} |
| FOR ${counter} IN RANGE 0 2 |
| ${loggable_entity} Get From List ${loggable_entities} ${counter} |
| Set To Dictionary ${loggable_entity} logLevel ${log_level} |
| END |
| ${loglvl_request}= Evaluate {'device_uuid':${uuid}, 'loglevels':${loggable_entities}} |
| ${response}= Run Keyword ${lib_instance}.Hw Management Service Set Log Level ${loglvl_request} |
| Check Dmi Status ${response} OK_STATUS |
| |
| Set Log Endpoint |
| [Documentation] set the given logging endpoint in device |
| [Arguments] ${lib_instance} ${uuid} ${defined_endpoint} ${defined_protocol} |
| ${set_endpoint}= Create Dictionary device_uuid=${suite_device_uuid} logging_endpoint=${defined_endpoint} |
| Set To Dictionary ${set_endpoint} logging_protocol=${defined_protocol} |
| ${response}= Run Keyword ${lib_instance}.Hw Management Service Set Logging Endpoint ${set_endpoint} |
| Check Dmi Status ${response} OK_STATUS |