| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # onos common functions |
| |
| *** Settings *** |
| Documentation Library for various utilities |
| Library SSHLibrary |
| Library String |
| Library DateTime |
| Library Process |
| Library Collections |
| Library RequestsLibrary |
| Library OperatingSystem |
| Resource ./flows.robot |
| |
| *** Variables *** |
| @{connection_list} |
| |
| *** Keywords *** |
| |
| Open ONOS SSH Connection |
| [Documentation] Establishes an ssh connection to ONOS contoller |
| [Arguments] ${host} ${port} ${user}=karaf ${pass}=karaf |
| ${conn_id}= SSHLibrary.Open Connection ${host} port=${port} timeout=300s alias=ONOS_SSH |
| SSHLibrary.Login ${user} ${pass} |
| ${conn_list_entry}= Create Dictionary conn_id=${conn_id} user=${user} pass=${pass} |
| Append To List ${connection_list} ${conn_list_entry} |
| ${conn_list_id}= Get Index From List ${connection_list} ${conn_list_entry} |
| Set Global Variable ${connection_list} |
| [Return] ${conn_list_id} |
| |
| Execute ONOS CLI Command use single connection |
| [Documentation] Execute ONOS CLI Command use an Open Connection |
| ... In case no connection is open a connection will be opened |
| [Arguments] ${host} ${port} ${cmd} |
| ${connection_list_id}= Get Conn List Id ${host} ${port} |
| ${connection_list_id}= Run Keyword If "${connection_list_id}"=="${EMPTY}" |
| ... Open ONOS SSH Connection ${host} ${port} |
| ... ELSE Set Variable ${connection_list_id} |
| ${connection_entry}= Get From List ${connection_list} ${connection_list_id} |
| SSHLibrary.Switch Connection ${connection_entry.conn_id} |
| ${PassOrFail} @{result_values} Run Keyword And Ignore Error SSHLibrary.Execute Command ${cmd} |
| ... return_rc=True return_stderr=True return_stdout=True |
| Run Keyword If '${PassOrFail}'=='FAIL' Reconnect ONOS SSH Connection ${connection_list_id} |
| @{result_values}= Run Keyword If '${PassOrFail}'=='FAIL' |
| ... SSHLibrary.Execute Command ${cmd} return_rc=True return_stderr=True return_stdout=True |
| ... ELSE Set Variable @{result_values} |
| ${output} Set Variable @{result_values}[0] |
| Log Command output: ${output} |
| Should Be Empty @{result_values}[1] |
| Should Be Equal As Integers @{result_values}[2] 0 |
| [Return] ${output} |
| |
| Get Conn List Id |
| [Documentation] Looks up for an Open Connection with passed host and port in conection list |
| ... First match connection will be used. |
| [Arguments] ${host} ${port} |
| ${connection_list_id}= Set Variable ${EMPTY} |
| ${match}= Set Variable False |
| ${length}= Get Length ${connection_list} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| #${Item}= Get From List ${connection_list} ${INDEX} |
| ${conndata}= Get Connection ${connection_list[${INDEX}].conn_id} |
| ${match}= Set Variable If '${conndata.host}'=='${host}' and '${conndata.port}'=='${port}' True False |
| ${connection_list_id}= Set Variable If ${match} ${INDEX} ${EMPTY} |
| Exit For Loop If ${match} |
| END |
| [Return] ${connection_list_id} |
| |
| Reconnect ONOS SSH Connection |
| [Documentation] Reconnect an SSH Connection |
| [Arguments] ${connection_list_id} |
| ${connection_entry}= Get From List ${connection_list} ${connection_list_id} |
| ${user}= Get From Dictionary ${connection_entry} user |
| ${pass}= Get From Dictionary ${connection_entry} pass |
| ${oldconndata}= Get Connection ${connection_entry.conn_id} |
| SSHLibrary.Switch Connection ${connection_entry.conn_id} |
| Run Keyword And Ignore Error SSHLibrary.Close Connection |
| ${conn_id}= SSHLibrary.Open Connection ${oldconndata.host} port=${oldconndata.port} |
| ... timeout=300s alias=ONOS_SSH |
| SSHLibrary.Login ${user} ${pass} |
| ${conn_list_entry}= Create Dictionary conn_id=${conn_id} user=${user} pass=${pass} |
| Set List Value ${connection_list} ${connection_list_id} ${conn_list_entry} |
| Set Global Variable ${connection_list} |
| |
| Close ONOS SSH Connection |
| [Documentation] Close an SSH Connection |
| [Arguments] ${connection_list_id} |
| ${connection_entry}= Get From List ${connection_list} ${connection_list_id} |
| ${connection_alias}= Get From Dictionary ${connection_entry} conn_id |
| ${oldconndata}= Get Connection ${connection_entry.conn_id} |
| SSHLibrary.Switch Connection ${connection_alias} |
| Run Keyword And Ignore Error SSHLibrary.Close Connection |
| Remove From List ${connection_list} ${connection_list_id} |
| Set Global Variable ${connection_list} |
| |
| Close All ONOS SSH Connections |
| [Documentation] Close all SSH Connection and clear connection list. |
| SSHLibrary.Close All Connections |
| @{connection_list} Create List |
| |
| Validate OLT Device in ONOS |
| # FIXME use volt-olts to check that the OLT is ONOS |
| [Arguments] ${serial_number} |
| [Documentation] Checks if olt has been connected to ONOS |
| ${resp}= Get Request ONOS onos/v1/devices |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['devices']} |
| ${length}= Get Length ${jsondata['devices']} |
| @{serial_numbers}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['devices']} ${INDEX} |
| ${of_id}= Get From Dictionary ${value} id |
| ${sn}= Get From Dictionary ${value} serial |
| ${matched}= Set Variable If '${sn}' == '${serial_number}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for ${serial_number} found |
| [Return] ${of_id} |
| |
| Get ONU Port in ONOS |
| [Arguments] ${onu_serial_number} ${olt_of_id} ${onu_uni_id}=1 |
| [Documentation] Retrieves ONU port for the ONU in ONOS |
| ${onu_serial_number}= Catenate SEPARATOR=- ${onu_serial_number} ${onu_uni_id} |
| ${resp}= Get Request ONOS onos/v1/devices/${olt_of_id}/ports |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['ports']} |
| ${length}= Get Length ${jsondata['ports']} |
| @{ports}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['ports']} ${INDEX} |
| ${annotations}= Get From Dictionary ${value} annotations |
| ${onu_port}= Get From Dictionary ${value} port |
| ${portName}= Get From Dictionary ${annotations} portName |
| ${matched}= Set Variable If '${portName}' == '${onu_serial_number}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for ${onu_serial_number} found |
| [Return] ${onu_port} |
| |
| Get NNI Port in ONOS |
| [Arguments] ${olt_of_id} |
| [Documentation] Retrieves NNI port for the OLT in ONOS |
| ${resp}= Get Request ONOS onos/v1/devices/${olt_of_id}/ports |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['ports']} |
| ${length}= Get Length ${jsondata['ports']} |
| @{ports}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['ports']} ${INDEX} |
| ${annotations}= Get From Dictionary ${value} annotations |
| ${nni_port}= Get From Dictionary ${value} port |
| ${nniPortName}= Catenate SEPARATOR= nni- ${nni_port} |
| ${portName}= Get From Dictionary ${annotations} portName |
| ${matched}= Set Variable If '${portName}' == '${nniPortName}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for NNI found for ${olt_of_id} |
| [Return] ${nni_port} |
| |
| Get FabricSwitch in ONOS |
| [Documentation] Returns of_id of the Fabric Switch in ONOS |
| ${resp}= Get Request ONOS onos/v1/devices |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['devices']} |
| ${length}= Get Length ${jsondata['devices']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['devices']} ${INDEX} |
| ${of_id}= Get From Dictionary ${value} id |
| ${type}= Get From Dictionary ${value} type |
| ${matched}= Set Variable If '${type}' == "SWITCH" True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No fabric switch found |
| [Return] ${of_id} |
| |
| Get Master Instace in ONOS |
| [Arguments] ${of_id} |
| [Documentation] Returns nodeId of the Master instace for a giver device in ONOS |
| ${resp}= Get Request ONOS onos/v1/mastership/${of_id}/master |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['nodeId']} |
| ${master_node}= Get From Dictionary ${jsondata} nodeId |
| [Return] ${master_node} |
| |
| Verify LLDP Flow Added |
| [Arguments] ${ip} ${port} ${olt_of_id} ${expected_flows} |
| [Documentation] Matches for total number of LLDP flows added for one OLT |
| ${lldp_flows_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s ADDED ${olt_of_id} | grep -v deviceId | grep ETH_TYPE:lldp | grep -v ETH_TYPE:arp |
| ${lldp_flows_added_count}= Get Line Count ${lldp_flows_added} |
| Should Be Equal As Integers ${lldp_flows_added_count} ${expected_flows} |
| |
| Verify Subscriber Access Flows Added for ONU |
| [Arguments] ${ip} ${port} ${olt_of_id} ${onu_port} ${nni_port} ${c_tag} ${s_tag} |
| [Documentation] Verifies if the Subscriber Access Flows are added in ONOS for the ONU |
| # Verify upstream table=0 flow |
| ${upstream_flow_0_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${onu_port} | grep VLAN_VID:0 | |
| ... grep VLAN_ID:${c_tag} | grep transition=TABLE:1 |
| ${upstream_flow_0_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${upstream_flow_0_cmd} |
| Should Not Be Empty ${upstream_flow_0_added} |
| # Verify upstream table=1 flow |
| ${flow_vlan_push_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${onu_port} | grep VLAN_VID:${c_tag} | |
| ... grep VLAN_PUSH | grep VLAN_ID:${s_tag} | grep OUTPUT:${nni_port} |
| ${upstream_flow_1_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${flow_vlan_push_cmd} |
| Should Not Be Empty ${upstream_flow_1_added} |
| # Verify downstream table=0 flow |
| ${flow_vlan_pop_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${nni_port} | grep VLAN_VID:${s_tag} | |
| ... grep VLAN_POP | grep transition=TABLE:1 |
| ${downstream_flow_0_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${flow_vlan_pop_cmd} |
| Should Not Be Empty ${downstream_flow_0_added} |
| # Verify downstream table=1 flow |
| ${downstream_flow_1_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${nni_port} | grep VLAN_VID:${c_tag} | |
| ... grep VLAN_ID:0 | grep OUTPUT:${onu_port} |
| ${downstream_flow_1_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${downstream_flow_1_cmd} |
| Should Not Be Empty ${downstream_flow_1_added} |
| # Verify ipv4 dhcp upstream flow |
| ${upstream_flow_ipv4_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${onu_port} | grep ETH_TYPE:ipv4 | |
| ... grep IP_PROTO:17 | grep UDP_SRC:68 | grep UDP_DST:67 | grep VLAN_ID:${c_tag} | |
| ... grep OUTPUT:CONTROLLER |
| ${upstream_flow_ipv4_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${upstream_flow_ipv4_cmd} |
| Should Not Be Empty ${upstream_flow_ipv4_added} |
| # Verify ipv4 dhcp downstream flow |
| # Note: This flow will be one per nni per olt |
| ${downstream_flow_ipv4_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${nni_port} | grep ETH_TYPE:ipv4 | |
| ... grep IP_PROTO:17 | grep UDP_SRC:67 | grep UDP_DST:68 | grep OUTPUT:CONTROLLER |
| ${downstream_flow_ipv4_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${downstream_flow_ipv4_cmd} |
| Should Not Be Empty ${downstream_flow_ipv4_added} |
| |
| Verify Subscriber Access Flows Added for ONU DT |
| [Arguments] ${ip} ${port} ${olt_of_id} ${onu_port} ${nni_port} ${s_tag} |
| [Documentation] Verifies if the Subscriber Access Flows are added in ONOS for the ONU |
| # Verify upstream table=0 flow |
| ${upstream_flow_0_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${onu_port} | grep VLAN_VID:Any | grep transition=TABLE:1 |
| Should Not Be Empty ${upstream_flow_0_added} |
| # Verify upstream table=1 flow |
| ${flow_vlan_push_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${onu_port} | grep VLAN_VID:Any | |
| ... grep VLAN_PUSH | grep VLAN_ID:${s_tag} | grep OUTPUT:${nni_port} |
| ${upstream_flow_1_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${flow_vlan_push_cmd} |
| Should Not Be Empty ${upstream_flow_1_added} |
| # Verify downstream table=0 flow |
| ${flow_vlan_pop_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${nni_port} | grep VLAN_VID:${s_tag} | |
| ... grep VLAN_POP | grep transition=TABLE:1 |
| ${downstream_flow_0_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${flow_vlan_pop_cmd} |
| Should Not Be Empty ${downstream_flow_0_added} |
| # Verify downstream table=1 flow |
| ${downstream_flow_1_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${nni_port} | grep VLAN_VID:Any | grep OUTPUT:${onu_port} |
| Should Not Be Empty ${downstream_flow_1_added} |
| |
| Verify Subscriber Access Flows Added Count DT |
| [Arguments] ${ip} ${port} ${olt_of_id} ${expected_flows} |
| [Documentation] Matches for total number of subscriber access flows added for all onus |
| ${access_flows_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s ADDED ${olt_of_id} | grep -v deviceId | grep -v ETH_TYPE:lldp | grep -v ETH_TYPE:arp |
| ${access_flows_added_count}= Get Line Count ${access_flows_added} |
| Should Be Equal As Integers ${access_flows_added_count} ${expected_flows} |
| |
| Verify Added Flow Count for OLT TT |
| [Arguments] ${ip} ${port} ${olt_of_id} ${expected_flows} |
| [Documentation] Total number of added flows given OLT with subscriber flows |
| ${access_flows_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s ADDED ${olt_of_id} | grep -v deviceId |
| ${access_flows_added_count}= Get Line Count ${access_flows_added} |
| Should Be Equal As Integers ${access_flows_added_count} ${expected_flows} |
| |
| Verify Default Downstream Flows are added in ONOS for OLT TT |
| [Arguments] ${ip} ${port} ${olt_of_id} ${nni_port} |
| [Documentation] Verifies if the Default Downstream Flows are added in ONOS for the OLT |
| # Verify lldp flow |
| ${downstream_flow_lldp_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep lldp | |
| ... grep OUTPUT:CONTROLLER |
| ${downstream_flow_lldp_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${downstream_flow_lldp_cmd} |
| Should Not Be Empty ${downstream_flow_lldp_added} |
| # Verify downstream dhcp flow |
| ${downstream_flow_dhcp_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IP_PROTO:17 | grep UDP_SRC:67 | grep UDP_DST:68 | |
| ... grep OUTPUT:CONTROLLER |
| ${downstream_flow_dhcp_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${downstream_flow_dhcp_cmd} |
| Should Not Be Empty ${downstream_flow_dhcp_added} |
| # Verify downstream igmp flow |
| ${downstream_flow_igmp_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IP_PROTO:2 | |
| ... grep OUTPUT:CONTROLLER |
| ${downstream_flow_igmp_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${downstream_flow_igmp_cmd} |
| Should Not Be Empty ${downstream_flow_igmp_added} |
| |
| Get Programmed Subscribers |
| [Arguments] ${ip} ${port} ${olt_of_id} ${onu_port} |
| [Documentation] Retrieves the subscriber details at a given location |
| ${sub_location}= Catenate SEPARATOR=/ ${olt_of_id} ${onu_port} |
| ${programmed_sub}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... volt-programmed-subscribers | grep ${sub_location} |
| [Return] ${programmed_sub} |
| |
| Get Upstream and Downstream Bandwidth Profile Name |
| [Arguments] ${programmed_sub} |
| [Documentation] Retrieves the upstream and downstream bandwidth profile name |
| ... from the programmed subscriber |
| @{programmed_sub_array}= Split String ${programmed_sub} , |
| # Get upstream bandwidth profile name for the subscriber |
| @{param_val_pair}= Split String ${programmed_sub_array[9]} = |
| ${programmed_sub_param}= Set Variable ${param_val_pair[0]} |
| ${programmed_sub_val}= Set Variable ${param_val_pair[1]} |
| ${us_bw_profile}= Run Keyword If '${programmed_sub_param}' == ' upstreamBandwidthProfile' |
| ... Set Variable ${programmed_sub_val} |
| Log ${us_bw_profile} |
| # Get downstream bandwidth profile name for the subscriber |
| @{param_val_pair}= Split String ${programmed_sub_array[10]} = |
| ${programmed_sub_param}= Set Variable ${param_val_pair[0]} |
| ${programmed_sub_val}= Set Variable ${param_val_pair[1]} |
| ${ds_bw_profile}= Run Keyword If '${programmed_sub_param}' == ' downstreamBandwidthProfile' |
| ... Set Variable ${programmed_sub_val} |
| Log ${ds_bw_profile} |
| [Return] ${us_bw_profile} ${ds_bw_profile} |
| |
| Get Bandwidth Profile Details |
| [Arguments] ${ip} ${port} ${bw_profile} |
| [Documentation] Retrieves the details of the given bandwidth profile |
| ${bw_profile_values}= Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... bandwidthprofile ${bw_profile} |
| @{bw_profile_array}= Split String ${bw_profile_values} , |
| @{param_val_pair}= Split String ${bw_profile_array[1]} = |
| ${bw_param}= Set Variable ${param_val_pair[0]} |
| ${bw_val}= Set Variable ${param_val_pair[1]} |
| ${cir} Run Keyword If '${bw_param}' == ' committedInformationRate' |
| ... Set Variable ${bw_val} |
| @{param_val_pair}= Split String ${bw_profile_array[2]} = |
| ${bw_param}= Set Variable ${param_val_pair[0]} |
| ${bw_val}= Set Variable ${param_val_pair[1]} |
| ${cbs} Run Keyword If '${bw_param}' == ' committedBurstSize' |
| ... Set Variable ${bw_val} |
| @{param_val_pair}= Split String ${bw_profile_array[3]} = |
| ${bw_param}= Set Variable ${param_val_pair[0]} |
| ${bw_val}= Set Variable ${param_val_pair[1]} |
| ${eir} Run Keyword If '${bw_param}' == ' exceededInformationRate' |
| ... Set Variable ${bw_val} |
| @{param_val_pair}= Split String ${bw_profile_array[4]} = |
| ${bw_param}= Set Variable ${param_val_pair[0]} |
| ${bw_val}= Set Variable ${param_val_pair[1]} |
| ${ebs} Run Keyword If '${bw_param}' == ' exceededBurstSize' |
| ... Set Variable ${bw_val} |
| @{param_val_pair}= Split String ${bw_profile_array[5]} = |
| ${bw_param}= Set Variable ${param_val_pair[0]} |
| ${bw_val}= Set Variable ${param_val_pair[1]} |
| @{bw_val_air}= Split String ${bw_val} } |
| ${air} Run Keyword If '${bw_param}' == ' assuredInformationRate' |
| ... Set Variable ${bw_val_air[0]} |
| [Return] ${cir} ${cbs} ${eir} ${ebs} ${air} |
| |
| Get Bandwidth Profile Details Rest |
| [Arguments] ${bw_profile_id} |
| [Documentation] Retrieves the details of the given bandwidth profile using REST API |
| ${bw_profile_id}= Remove String ${bw_profile_id} ' " |
| ${resp}= Get Request ONOS onos/sadis/bandwidthprofile/${bw_profile_id} |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['entry']} |
| ${length}= Get Length ${jsondata['entry']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['entry']} ${INDEX} |
| ${bw_id}= Get From Dictionary ${value} id |
| ${matched}= Set Variable If '${bw_id}' == '${bw_profile_id}' True False |
| ${eir}= Get From Dictionary ${value} eir |
| ${ebs}= Get From Dictionary ${value} ebs |
| ${cir}= Get From Dictionary ${value} cir |
| ${cbs}= Get From Dictionary ${value} cbs |
| ${air}= Get From Dictionary ${value} air |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No bandwidth profile found for id: ${bw_profile_id} |
| [Return] ${cir} ${cbs} ${eir} ${ebs} ${air} |
| |
| Get Bandwidth Profile Details Ietf Rest |
| [Arguments] ${bw_profile_id} |
| [Documentation] Retrieves the details of the given Ietf standard based bandwidth profile using REST API |
| ${bw_profile_id}= Remove String ${bw_profile_id} ' " |
| ${resp}= Get Request ONOS onos/sadis/bandwidthprofile/${bw_profile_id} |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['entry']} |
| ${length}= Get Length ${jsondata['entry']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['entry']} ${INDEX} |
| ${bw_id}= Get From Dictionary ${value} id |
| ${matched}= Set Variable If '${bw_id}' == '${bw_profile_id}' True False |
| ${pir}= Get From Dictionary ${value} pir |
| ${pbs}= Get From Dictionary ${value} pbs |
| ${cir}= Get From Dictionary ${value} cir |
| ${cbs}= Get From Dictionary ${value} cbs |
| ${gir}= Get From Dictionary ${value} gir |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No bandwidth profile found for id: ${bw_profile_id} |
| [Return] ${cir} ${cbs} ${pir} ${pbs} ${gir} |
| |
| Verify Meters in ONOS Ietf |
| [Arguments] ${ip} ${port} ${olt_of_id} ${onu_port} |
| [Documentation] Verifies the meters with BW Ietf format (currently, DT workflow uses this format) |
| # Get programmed subscriber |
| ${programmed_sub}= Get Programmed Subscribers ${ip} ${port} |
| ... ${olt_of_id} ${onu_port} |
| Log ${programmed_sub} |
| ${us_bw_profile} ${ds_bw_profile} Get Upstream and Downstream Bandwidth Profile Name |
| ... ${programmed_sub} |
| # Get upstream bandwidth profile details |
| ${us_cir} ${us_cbs} ${us_pir} ${us_pbs} ${us_gir} Get Bandwidth Profile Details Ietf Rest |
| ... ${us_bw_profile} |
| # Verify meter for upstream bandwidth profile |
| ${us_meter_cmd}= Run Keyword If ${us_gir} != 0 Catenate SEPARATOR= |
| ... meters ${olt_of_id} | grep state=ADDED | grep "rate=${us_cir}, burst-size=${us_cbs}" |
| ... | grep "rate=${us_pir}, burst-size=${us_pbs}" | grep "rate=${us_gir}, burst-size=0" | wc -l |
| ... ELSE Catenate SEPARATOR= |
| ... meters ${olt_of_id} | grep state=ADDED | grep "rate=${us_cir}, burst-size=${us_cbs}" |
| ... | grep "rate=${us_pir}, burst-size=${us_pbs}" | wc -l |
| ${upstream_meter_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${us_meter_cmd} |
| Should Be Equal As Integers ${upstream_meter_added} 1 Upstream meter is missing |
| # Get downstream bandwidth profile details |
| ${ds_cir} ${ds_cbs} ${ds_pir} ${ds_pbs} ${ds_gir} Get Bandwidth Profile Details Ietf Rest |
| ... ${ds_bw_profile} |
| # Verify meter for downstream bandwidth profile |
| ${ds_meter_cmd}= Run Keyword If ${ds_gir} != 0 Catenate SEPARATOR= |
| ... meters ${olt_of_id} | grep state=ADDED | grep "rate=${ds_cir}, burst-size=${ds_cbs}" |
| ... | grep "rate=${ds_pir}, burst-size=${ds_pbs}" | grep "rate=${ds_gir}, burst-size=0" | wc -l |
| ... ELSE Catenate SEPARATOR= |
| ... meters ${olt_of_id} | grep state=ADDED | grep "rate=${ds_cir}, burst-size=${ds_cbs}" |
| ... | grep "rate=${ds_pir}, burst-size=${ds_pbs}" | wc -l |
| ${downstream_meter_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${ds_meter_cmd} |
| Should Be Equal As Integers ${downstream_meter_added} 1 Downstream meter is missing |
| |
| Verify Meters in ONOS |
| [Arguments] ${ip} ${port} ${olt_of_id} ${onu_port} |
| [Documentation] Verifies the meters |
| # Get programmed subscriber |
| ${programmed_sub}= Get Programmed Subscribers ${ip} ${port} |
| ... ${olt_of_id} ${onu_port} |
| Log ${programmed_sub} |
| ${us_bw_profile} ${ds_bw_profile} Get Upstream and Downstream Bandwidth Profile Name |
| ... ${programmed_sub} |
| # logging all meters to facilitate debug |
| ${all_meters}= Execute ONOS CLI Command use single connection ${ip} ${port} meters |
| Log ${all_meters} |
| # Get upstream bandwidth profile details |
| ${us_cir} ${us_cbs} ${us_eir} ${us_ebs} ${us_air} Get Bandwidth Profile Details |
| ... ${ip} ${port} ${us_bw_profile} |
| Sleep 1s |
| ${us_pbs}= Evaluate ${us_cbs}+${us_ebs} |
| ${us_pir}= Evaluate ${us_eir}+${us_cir}+${us_air} |
| # Verify meter for upstream bandwidth profile |
| ${us_meter_cmd}= Catenate SEPARATOR= |
| ... meters ${olt_of_id} | grep state=ADDED | grep "rate=${us_cir}, burst-size=${us_cbs}" |
| ... | grep "rate=${us_pir}, burst-size=${us_pbs}" | grep "rate=${us_air}, burst-size=0" | wc -l |
| ${upstream_meter_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${us_meter_cmd} |
| Should Be Equal As Integers ${upstream_meter_added} 1 Upstream meter is missing |
| Sleep 1s |
| # Get downstream bandwidth profile details |
| ${ds_cir} ${ds_cbs} ${ds_eir} ${ds_ebs} ${ds_air} Get Bandwidth Profile Details |
| ... ${ip} ${port} ${ds_bw_profile} |
| Sleep 1s |
| # Verify meter for downstream bandwidth profile |
| ${ds_pbs}= Evaluate ${ds_cbs}+${ds_ebs} |
| ${ds_pir}= Evaluate ${ds_eir}+${ds_cir}+${ds_air} |
| ${ds_meter_cmd}= Catenate SEPARATOR= |
| ... meters ${olt_of_id} | grep state=ADDED | grep "rate=${ds_cir}, burst-size=${ds_cbs}" |
| ... | grep "rate=${ds_pir}, burst-size=${ds_pbs}" | grep "rate=${ds_air}, burst-size=0" | wc -l |
| ${downstream_meter_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${ds_meter_cmd} |
| Should Be Equal As Integers ${downstream_meter_added} 1 Downstream meter is missing |
| |
| Verify Default Meter Present in ONOS |
| [Arguments] ${ip} ${port} ${olt_of_id} |
| [Documentation] Verifies the single default meter entry is present |
| # Get default bandwidth profile details |
| ${cir} ${cbs} ${eir} ${ebs} ${air} Get Bandwidth Profile Details |
| ... ${ip} ${port} 'Default' |
| Sleep 1s |
| ${pbs}= Evaluate ${cbs}+${ebs} |
| ${pir}= Evaluate ${eir}+${cir}+${air} |
| # Verify meter for default bandwidth profile |
| ${meter_cmd}= Catenate SEPARATOR= |
| ... meters ${olt_of_id} | grep state=ADDED | grep "rate=${cir}, burst-size=${cbs}" |
| ... | grep "rate=${pir}, burst-size=${pbs}" | grep "rate=${air}, burst-size=0" | wc -l |
| ${default_meter_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ${meter_cmd} |
| # logging all meters to facilitate debug |
| ${all_meters}= Execute ONOS CLI Command use single connection ${ip} ${port} meters |
| Log ${all_meters} |
| # done logging all meters to facilitate debug |
| Should Be Equal As Integers ${default_meter_added} 1 Default Meter not present |
| |
| Verify Device Flows Removed |
| [Arguments] ${ip} ${port} ${olt_of_id} |
| [Documentation] Verifies all flows are removed from the device |
| ${device_flows}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s -f ${olt_of_id} | grep -v deviceId |
| ${flow_count}= Get Line Count ${device_flows} |
| Should Be Equal As Integers ${flow_count} 0 Flows not removed |
| |
| Verify Eapol Flows Added |
| [Arguments] ${ip} ${port} ${expected_flows} |
| [Documentation] Matches for number of eapol flows based on number of onus |
| ${eapol_flows_added}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s -f ADDED | grep eapol | grep IN_PORT | wc -l |
| Should Contain ${eapol_flows_added} ${expected_flows} |
| |
| Verify No Pending Flows For ONU |
| [Arguments] ${ip} ${port} ${onu_port} |
| [Documentation] Verifies that there are no flows "PENDING" state for the ONU in ONOS |
| ${pending_flows}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s | grep IN_PORT:${onu_port} | grep PENDING |
| Should Be Empty ${pending_flows} |
| |
| Verify Eapol Flows Added For ONU |
| [Arguments] ${ip} ${port} ${olt_of_id} ${onu_port} ${c_tag}=4091 |
| [Documentation] Verifies if the Eapol Flows are added in ONOS for the ONU |
| ${eapol_flow_cmd}= Catenate SEPARATOR= |
| ... flows -s ADDED ${olt_of_id} | grep IN_PORT:${onu_port} | grep ETH_TYPE:eapol | |
| ... grep VLAN_ID:${c_tag} | grep OUTPUT:CONTROLLER |
| ${eapol_flows_added}= Execute ONOS CLI Command use single connection ${ip} ${port} ${eapol_flow_cmd} |
| Should Not Be Empty ${eapol_flows_added} |
| |
| Verify UNI Port Is Enabled |
| [Arguments] ${ip} ${port} ${onu_name} ${onu_uni_id}=1 |
| [Documentation] Verifies if the ONU's UNI port is enabled in ONOS |
| ${onu_port_enabled}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ports -e | grep portName=${onu_name}-${onu_uni_id} |
| Log ${onu_port_enabled} |
| Should Not Be Empty ${onu_port_enabled} |
| |
| Verify UNI Port Is Disabled |
| [Arguments] ${ip} ${port} ${onu_name} ${onu_uni_id}=1 |
| [Documentation] Verifies if the ONU's UNI port is disabled in ONOS |
| ${onu_port_disabled}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ports | grep portName=${onu_name}-${onu_uni_id} | grep state=disabled |
| Log ${onu_port_disabled} |
| Should Not Be Empty ${onu_port_disabled} |
| |
| Verify ONU in AAA-Users |
| [Arguments] ${ip} ${port} ${onu_port} |
| [Documentation] Verifies that the specified onu_port exists in aaa-users output |
| ${aaa_users}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... aaa-users | grep AUTHORIZED | grep ${onu_port} |
| Should Not Be Empty ${aaa_users} ONU port ${onu_port} not found in aaa-users |
| |
| Verify Empty Group in ONOS |
| [Documentation] Verifies zero group count on the device |
| [Arguments] ${ip} ${port} ${deviceId} |
| ${groups}= Execute ONOS CLI Command use single connection ${ip} ${port} groups | grep ${deviceId} |
| @{groups_arr}= Split String ${groups} , |
| @{group_count_arr}= Split String ${groups_arr[1]} = |
| ${group_count}= Set Variable ${group_count_arr[1]} |
| Should Be Equal As Integers ${group_count} 0 |
| |
| Verify ONUs in Group Count in ONOS |
| [Documentation] Verifies there exists a group bucket list with certain entries/count |
| ... Note: Currently, this validates only if all ONUs of an OLT joined the same igmp group |
| [Arguments] ${ip} ${port} ${count} ${deviceId} |
| ${result}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... groups added ${deviceId} | grep bucket | wc -l |
| Should Be Equal As Integers ${result} ${count} Bucket list count for a group: Found=${result} Expected=${count} |
| |
| Verify ONU in Group Bucket |
| [Documentation] Matches if ONU port in Group Bucket |
| [Arguments] ${group_bucket_values} ${onu_port} |
| ${len}= Get Length ${group_bucket_values} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${len} |
| ${value_bucket}= Get From List ${group_bucket_values} ${INDEX} |
| ${treatment}= Get From Dictionary ${value_bucket} treatment |
| ${instructions}= Get From Dictionary ${treatment} instructions |
| ${instructions_val}= Get From List ${instructions} 0 |
| ${port}= Get From Dictionary ${instructions_val} port |
| ${matched}= Set Variable If '${port}'=='${onu_port}' True False |
| Exit For Loop If ${matched} |
| END |
| [Return] ${matched} |
| |
| Verify ONU in Groups |
| [Arguments] ${ip_onos} ${port_onos} ${deviceId} ${onu_port} ${group_exist}=True |
| [Documentation] Verifies that the specified onu_port exists in groups output |
| ${result}= Execute ONOS CLI Command use single connection ${ip_onos} ${port_onos} groups -j |
| Log Groups: ${result} |
| ${groups}= To Json ${result} |
| ${length}= Get Length ${groups} |
| ${buckets}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${groups} ${INDEX} |
| ${devId}= Get From Dictionary ${value} deviceId |
| ${bucket}= Get From Dictionary ${value} buckets |
| Run Keyword If '${devId}'=='${deviceId}' |
| ... Append To List ${buckets} ${bucket} |
| END |
| ${bucket_len}= Get Length ${buckets} |
| FOR ${INDEX_1} IN RANGE 0 ${bucket_len} |
| ${value}= Get From List ${buckets} ${INDEX_1} |
| ${matched}= Verify ONU in Group Bucket ${value} ${onu_port} |
| Exit For Loop If ${matched} |
| END |
| Run Keyword If ${group_exist} |
| ... Should Be True ${matched} No match for ${deviceId} and ${onu_port} found in ONOS groups |
| ... ELSE |
| ... Should Be True '${matched}'=='False' Match for ${deviceId} and ${onu_port} found in ONOS groups |
| |
| Assert Number of AAA-Users |
| [Arguments] ${ip} ${port} ${expected_onus} ${deviceId} |
| [Documentation] Matches for number of aaa-users authorized based on number of onus |
| ${aaa_users}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... aaa-users | grep ${deviceId} | grep AUTHORIZED | wc -l |
| Log Found ${aaa_users} of ${expected_onus} expected authenticated users on device ${deviceId} |
| Should Be Equal As Integers ${aaa_users} ${expected_onus} |
| |
| Validate DHCP Allocations |
| [Arguments] ${ip} ${port} ${count} ${workflow} ${deviceId} |
| [Documentation] Matches for number of dhcpacks based on number of onus |
| ${allocations}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... dhcpl2relay-allocations | grep ${deviceId} | grep DHCPACK | wc -l |
| # if the workflow is TT we'll have 2 allocations for each ONU |
| ${ttAllocations}= Evaluate (${count} * 2) |
| ${count}= Set Variable If $workflow=='tt' ${ttAllocations} ${count} |
| Log Found ${allocations} of ${count} expected DHCPACK on device ${deviceId} |
| Should Be Equal As Integers ${allocations} ${count} |
| |
| Validate Subscriber DHCP Allocation |
| [Arguments] ${ip} ${port} ${onu_port} ${vlan}='' |
| [Documentation] Verifies that the specified subscriber is found in DHCP allocations |
| ##TODO: Enhance the keyword to include DHCP allocated address is not 0.0.0.0 |
| ${allocations}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... dhcpl2relay-allocations | grep DHCPACK | grep ${onu_port} | grep ${vlan} |
| Should Not Be Empty ${allocations} ONU port ${onu_port} not found in dhcpl2relay-allocations |
| |
| Device Is Available In ONOS |
| [Arguments] ${url} ${dpid} ${available}=true |
| [Documentation] Validates the device exists and it has the expected availability in ONOS |
| ${rc} ${json} Run And Return Rc And Output curl --fail -sSL ${url}/onos/v1/devices/${dpid} |
| Should Be Equal As Integers 0 ${rc} |
| ${rc} ${value} Run And Return Rc And Output echo '${json}' | jq -r .available |
| Should Be Equal As Integers 0 ${rc} |
| Should Be Equal ${available} ${value} |
| |
| Remove All Devices From ONOS |
| [Arguments] ${url} |
| [Documentation] Executes the device-remove command on each device in ONOS |
| ${rc} ${output} Run And Return Rc And Output |
| ... curl --fail -sSL ${url}/onos/v1/devices | jq -r '.devices[].id' |
| Should Be Equal As Integers ${rc} 0 |
| @{dpids} Split String ${output} |
| ${count}= Get length ${dpids} |
| FOR ${dpid} IN @{dpids} |
| ${rc}= Run Keyword If '${dpid}' != '' |
| ... Run And Return Rc curl -XDELETE --fail -sSL ${url}/onos/v1/devices/${dpid} |
| Run Keyword If '${dpid}' != '' |
| ... Should Be Equal As Integers ${rc} 0 |
| END |
| |
| Assert ONU Port Is Disabled |
| [Arguments] ${ip} ${port} ${deviceId} ${onu_port} |
| [Documentation] Verifies if the ONU port is disabled in ONOS |
| ${onu_port_disabled}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ports -d ${deviceId} | grep port=${onu_port} |
| Log ${onu_port_disabled} |
| Should Not Be Empty ${onu_port_disabled} |
| |
| Assert Olts in ONOS |
| [Arguments] ${ip} ${port} ${count} |
| [Documentation] DEPRECATED use Assert Olt in ONOS |
| ... Check that a certain number of olts are known to ONOS |
| ${olts}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... volt-olts | wc -l |
| Log Found ${olts} of ${count} expected Olts |
| Should Be Equal As Integers ${olts} ${count} |
| |
| Assert Olt in ONOS |
| [Arguments] ${ip} ${port} ${deviceId} |
| [Documentation] Check that a particular olt is known to ONOS |
| ${olts}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... volt-olts | grep ${deviceId} | wc -l |
| Should Be Equal As Integers ${olts} 1 "Device ${deviceId} is not recognized as an OLT" |
| |
| Wait for Olts in ONOS |
| [Arguments] ${ip} ${port} ${count} ${max_wait_time}=10m |
| [Documentation] DEPRECATED use Wait for Olt in ONOS |
| ... Waits untill a certain number of ports are enabled in ONOS for a particular deviceId |
| Wait Until Keyword Succeeds ${max_wait_time} 5s Assert Olts in ONOS |
| ... ${ip} ${port} ${count} |
| |
| Wait for Olt in ONOS |
| [Arguments] ${ip} ${port} ${deviceId} ${max_wait_time}=10m |
| [Documentation] Waits until a particular deviceId is recognized by ONOS as an OLT |
| Wait Until Keyword Succeeds ${max_wait_time} 5s Assert Olt in ONOS |
| ... ${ip} ${port} ${deviceId} |
| |
| Assert Ports in ONOS |
| [Arguments] ${ip} ${port} ${count} ${deviceId} ${filter} |
| [Documentation] Check that a certain number of ports are enabled in ONOS |
| ${ports}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ports -e ${deviceId} | grep ${filter} | wc -l |
| Log Found ${ports} of ${count} expected ports on device ${deviceId} |
| Should Be Equal As Integers ${ports} ${count} |
| |
| Wait for Ports in ONOS |
| [Arguments] ${ip} ${port} ${count} ${deviceId} ${filter} ${max_wait_time}=10m |
| [Documentation] Waits untill a certain number of ports are enabled in ONOS for a particular deviceId |
| Wait Until Keyword Succeeds ${max_wait_time} 5s Assert Ports in ONOS |
| ... ${ip} ${port} ${count} ${deviceId} ${filter} |
| |
| Wait for AAA Authentication |
| [Arguments] ${ip} ${port} ${count} ${deviceId} ${max_wait_time}=10m |
| [Documentation] Waits untill a certain number of subscribers are authenticated in ONOS |
| Wait Until Keyword Succeeds ${max_wait_time} 5s Assert Number of AAA-Users |
| ... ${ip} ${port} ${count} ${deviceId} |
| |
| Wait for DHCP Ack |
| [Arguments] ${ip} ${port} ${count} ${workflow} ${deviceId} ${max_wait_time}=10m |
| [Documentation] Waits untill a certain number of subscribers have received a DHCP_ACK |
| Wait Until Keyword Succeeds ${max_wait_time} 5s Validate DHCP Allocations |
| ... ${ip} ${port} ${count} ${workflow} ${deviceId} |
| |
| Provision subscriber REST |
| [Documentation] Uses the rest APIs to provision a subscriber |
| [Arguments] ${of_id} ${onu_port} |
| ${resp}= Post Request ONOS |
| ... /onos/olt/oltapp/${of_id}/${onu_port} |
| Should Be Equal As Strings ${resp.status_code} 200 |
| |
| Count Enabled UNI Ports |
| [Documentation] Count all the UNI Ports on a Device |
| [Arguments] ${ip} ${port} ${of_id} |
| ${count}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ports -e ${of_id} | grep -v SWITCH | grep -v nni | wc -l |
| Log ${count} |
| [Return] ${count} |
| |
| List Enabled UNI Ports |
| [Documentation] List all the UNI Ports, the only way we have is to filter out the one called NNI |
| ... Creates a list of dictionaries |
| [Arguments] ${ip} ${port} ${of_id} |
| [Return] [{'port': '16', 'of_id': 'of:00000a0a0a0a0a00'}, {'port': '32', 'of_id': 'of:00000a0a0a0a0a00'}] |
| ${result}= Create List |
| ${out}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ports -e ${of_id} | grep -v SWITCH | grep -v nni |
| @{unis}= Split To Lines ${out} |
| FOR ${uni} IN @{unis} |
| ${matches} = Get Regexp Matches ${uni} .*port=([0-9]+),.* 1 |
| &{portDict} Create Dictionary of_id=${of_id} port=${matches[0]} |
| Append To List ${result} ${portDict} |
| END |
| Log ${result} |
| Return From Keyword ${result} |
| |
| Provision all subscribers on device |
| [Documentation] Provisions a subscriber in ONOS for all the enabled UNI ports on a particular device |
| [Arguments] ${ip} ${port} ${onos_ip} ${onos_rest_port} ${of_id} |
| ${unis}= List Enabled UNI Ports ${ip} ${port} ${of_id} |
| ${onos_auth}= Create List karaf karaf |
| Create Session ONOS http://${onos_ip}:${onos_rest_port} auth=${onos_auth} |
| FOR ${uni} IN @{unis} |
| Provision Subscriber REST ${uni['of_id']} ${uni['port']} |
| END |
| |
| List OLTs |
| # NOTE this method is not currently used but it can come useful in the future |
| [Documentation] Returns a list of all OLTs known to ONOS |
| [Arguments] ${ip} ${port} |
| [Return] ['of:00000a0a0a0a0a00', 'of:00000a0a0a0a0a01'] |
| ${result}= Create List |
| ${out}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... volt-olts |
| @{olts}= Split To Lines ${out} |
| FOR ${olt} IN @{olts} |
| Log ${olt} |
| ${matches} = Get Regexp Matches ${olt} ^OLT (.+)$ 1 |
| # there may be some logs mixed with the output so only append if we have a match |
| ${matches_length}= Get Length ${matches} |
| Run Keyword If ${matches_length}==1 |
| ... Append To List ${result} ${matches[0]} |
| END |
| Return From Keyword ${result} |
| |
| Count flows |
| [Documentation] Count flows in a particular ${state} in ONOS |
| [Arguments] ${ip} ${port} ${targetFlows} ${deviceId} ${state} |
| ${flows}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s ${state} ${deviceId} | grep -v deviceId | wc -l |
| Log Found ${state} ${flows} of ${targetFlows} expected flows on device ${deviceId} |
| Should Be Equal As Integers ${targetFlows} ${flows} |
| |
| Wait for all flows to in ADDED state |
| [Documentation] Waits until the flows have been provisioned |
| [Arguments] ${ip} ${port} ${deviceId} ${workflow} ${uni_count} ${olt_count} |
| ... ${provisioned} ${withEapol} ${withDhcp} ${withIgmp} ${withLldp} |
| ${targetFlows}= Calculate flows by workflow ${workflow} ${uni_count} ${olt_count} ${provisioned} |
| ... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp} |
| Wait Until Keyword Succeeds 10m 5s Count flows |
| ... ${ip} ${port} ${targetFlows} ${deviceId} added |
| |
| Wait for all flows to be removed |
| [Documentation] Wait for all flows to be removed from a particular device |
| [Arguments] ${ip} ${port} ${deviceId} |
| Wait Until Keyword Succeeds 10m 5s Count flows |
| ... ${ip} ${port} 0 ${deviceId} any |
| |
| |
| Get Limiting Bandwidth Details |
| [Arguments] ${bandwidth_profile_name} |
| [Documentation] Collects the bandwidth profile details for the given bandwidth profile and |
| ... returns the limiting bandwidth |
| ${cir} ${cbs} ${eir} ${ebs} ${air}= Get Bandwidth Profile Details Rest |
| ... ${bandwidth_profile_name} |
| ${limiting_BW}= Evaluate ${eir}+${cir}+${air} |
| [Return] ${limiting_BW} |
| |
| Get Limiting Bandwidth Details for Fixed and Committed |
| [Arguments] ${bandwidth_profile_name} |
| [Documentation] Collects the bandwidth profile details for the given bandwidth profile and |
| ... returns the limiting bandwidth for fixed and committed |
| ${cir} ${cbs} ${eir} ${ebs} ${air}= Get Bandwidth Profile Details Rest |
| ... ${bandwidth_profile_name} |
| ${limiting_BW}= Evaluate ${cir}+${air} |
| [Return] ${limiting_BW} |
| |
| Validate Deleted Device Cleanup In ONOS |
| [Arguments] ${ip} ${port} ${olt_serial_number} |
| [Documentation] The keyword verifies that ports, flows, meters, subscribers, dhcp are all cleared in ONOS |
| # Fetch OF Id for OLT |
| ${olt_of_id}= Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device in ONOS ${olt_serial_number} |
| # Verify Ports are Removed |
| ${ports}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... ports ${olt_of_id} | grep -v ${olt_of_id} |
| ${port_count}= Get Line Count ${ports} |
| Should Be Equal As Integers ${port_count} 0 Ports have not been removed from ONOS after cleanup |
| # Verify Subscribers are Removed |
| ${sub}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... volt-programmed-subscribers | grep ${olt_of_id} |
| ${sub_count}= Get Line Count ${sub} |
| Should Be Equal As Integers ${sub_count} 0 Subscribers have not been removed from ONOS after cleanup |
| # Verify Flows are Removed |
| ${flow}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... flows -s -f ${olt_of_id} | grep -v deviceId |
| ${flow_count}= Get Line Count ${flow} |
| Should Be Equal As Integers ${flow_count} 0 Flows have not been removed from ONOS after cleanup |
| # Verify Meters are Removed |
| ${meter}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... meters ${olt_of_id} |
| ${meter_count}= Get Line Count ${meter} |
| Should Be Equal As Integers ${meter_count} 0 Meters have not been removed from ONOS after cleanup |
| # Verify AAA-Users are Removed |
| ${aaa}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... aaa-users ${olt_of_id} |
| ${aaa_count}= Get Line Count ${aaa} |
| Should Be Equal As Integers ${aaa_count} 0 AAA Users have not been removed from ONOS after cleanup |
| # Verify Dhcp-Allocations are Removed |
| ${dhcp}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| ... dhcpl2relay-allocations ${olt_of_id} |
| ${dhcp_count}= Get Line Count ${dhcp} |
| Should Be Equal As Integers ${dhcp_count} 0 DHCP Allocations have not been removed from ONOS after cleanup |
| |
| Delete ONOS App |
| [Arguments] ${url} ${app_name} |
| [Documentation] This keyword deactivates and uninstalls the given ONOS App |
| ${rc}= Run And Return Rc curl --fail -sSL -X DELETE ${url}/onos/v1/applications/${app_name} |
| Should Be Equal As Integers ${rc} 0 Can't delete ${app_name} from ONOS |
| |
| Verify ONOS App Active |
| [Arguments] ${url} ${app_name} ${app_version}=${EMPTY} |
| [Documentation] This keyword verifies that the given ONOS App status is Active |
| ${rc} ${output} Run And Return Rc And Output |
| ... curl --fail -sSL ${url}/onos/v1/applications/${app_name} | jq -r .state |
| Should Be Equal As Integers ${rc} 0 |
| Should Be Equal '${output}' 'ACTIVE' |
| ${rc1} ${output1} Run And Return Rc And Output |
| ... curl --fail -sSL ${url}/onos/v1/applications/${app_name} | jq -r .version |
| Run Keyword If '${app_version}'!='${EMPTY}' |
| ... Run Keywords |
| ... Should Be Equal As Integers ${rc1} 0 Can't read app ${app_name} status from ONOS |
| ... AND Should Be Equal '${output1}' '${app_version}' |
| |
| Install And Activate ONOS App |
| [Arguments] ${url} ${app_oar_file} |
| [Documentation] This keyword installs and activates the given ONOS App |
| ${cmd}= Catenate SEPARATOR= |
| ... curl --fail -sSL -H Content-Type:application/octet-stream - |
| ... X POST ${url}/onos/v1/applications?activate=true --data-binary \@${app_oar_file} |
| ${rc} ${output} Run And Return Rc And Output ${cmd} |
| Should Be Equal As Integers ${rc} 0 Can't load onos app ${app_oar_file} to ONOS" |
| Log ${output} |
| |
| Get ONOS App Details |
| [Arguments] ${url} ${app_name} |
| [Documentation] Retrieves ONOS App Details |
| ${rc} ${output} Run And Return Rc And Output |
| ... curl --fail -sSL ${url}/onos/v1/applications/${app_name} |
| Should Be Equal As Integers ${rc} 0 Can't read app ${app_name} details from ONOS |
| [Return] ${output} |