| *** Settings *** |
| Documentation Test various end-to-end scenarios with multiple OLTs |
| Suite Setup Setup Suite |
| Suite Teardown Teardown Suite |
| Test Setup |
| Test Teardown Teardown |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../variables/variables.robot |
| |
| *** Variables *** |
| ${POD_NAME} flex-ocp-cord |
| ${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs |
| #${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml |
| ${HELM_CHARTS_DIR} ~/helm-charts |
| ${VOLTHA_POD_NUM} 8 |
| ${NAMESPACE} voltha |
| # For below variable value, using deployment name as using grep for |
| # parsing radius pod name, we can also use full radius pod name |
| ${RESTART_POD_NAME} radius |
| ${timeout} 60s |
| ${of_id} 0 |
| ${logical_id} 0 |
| ${has_dataplane} True |
| ${external_libs} True |
| ${teardown_device} True |
| ${scripts} ../../scripts |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| |
| *** Test Cases *** |
| Sanity E2E Test for OLTs/ONUs on POD |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Validate successful authentication/DHCP/E2E ping for the tech profile that is used |
| [Tags] sanityMultiOLT |
| [Setup] Run Keywords Start Logging SanityMultiOLT |
| ... AND Setup Test |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| FOR ${I} IN RANGE 0 ${num_olts} |
| ${olt_ip}= Evaluate ${olts}[${I}].get("ip") |
| ${olt_user}= Evaluate ${olts}[${I}].get("user") |
| ${olt_pass}= Evaluate ${olts}[${I}].get("pass") |
| ${olt_serial_number}= Evaluate ${olts}[${I}].get("serial") |
| ${src}= Evaluate ${hosts}[${I}].get("src") |
| ${dst}= Evaluate ${hosts}[${I}].get("dst") |
| Set Suite Variable ${olt_serial_number} |
| Set Suite Variable ${olt_ip} |
| Set Suite Variable ${olt_user} |
| Set Suite Variable ${olt_pass} |
| Wait Until Keyword Succeeds ${timeout} 2s Do Sanity Test ${src} ${dst} |
| END |
| [Teardown] Run Keywords Collect Logs |
| ... AND Stop Logging SanityTest |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Setup the test suite |
| Set Global Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG} |
| Set Global Variable ${VOLTCTL_CONFIG} export VOLTCONFIG=%{VOLTCONFIG} |
| ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip") |
| ${ONOS_REST_IP}= Get Environment Variable ONOS_REST_IP ${k8s_node_ip} |
| ${ONOS_SSH_IP}= Get Environment Variable ONOS_SSH_IP ${k8s_node_ip} |
| Set Global Variable ${ONOS_REST_IP} |
| Set Global Variable ${ONOS_SSH_IP} |
| ${k8s_node_user}= Evaluate ${nodes}[0].get("user") |
| ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass") |
| Check CLI Tools Configured |
| ${onos_auth}= Create List karaf karaf |
| ${HEADERS} Create Dictionary Content-Type=application/json |
| Create Session ONOS http://${ONOS_REST_IP}:${ONOS_REST_PORT} auth=${ONOS_AUTH} |
| ${num_olts} Get Length ${olts} |
| ${num_olts} Convert to String ${num_olts} |
| ${list_olts} Create List |
| FOR ${I} IN RANGE 0 ${num_olts} |
| ${ip} Evaluate ${olts}[${I}].get("ip") |
| ${user} Evaluate ${olts}[${I}].get("user") |
| ${pass} Evaluate ${olts}[${I}].get("pass") |
| ${serial_number} Evaluate ${olts}[${I}].get("serial") |
| ${olt} Create Dictionary ip ${ip} user ${user} pass |
| ... ${pass} sn ${serial_number} |
| Append To List ${list_olts} ${olt} |
| END |
| ${olt_ip}= Evaluate ${olts}[0].get("ip") |
| ${olt_user}= Evaluate ${olts}[0].get("user") |
| ${olt_pass}= Evaluate ${olts}[0].get("pass") |
| ${olt_serial_number}= Evaluate ${olts}[0].get("serial") |
| ${num_onus}= Evaluate ${hosts}[0].get("src") |
| ${num_onus}= Get Length ${num_onus} |
| ${num_onus}= Convert to String ${num_onus} |
| #send sadis file to onos |
| ${sadis_file}= Get Variable Value ${sadis.file} |
| Log To Console \nSadis File:${sadis_file} |
| Run Keyword Unless '${sadis_file}' is '${None}' Send File To Onos ${sadis_file} apps/ |
| Set Suite Variable ${num_onus} |
| Set Suite Variable ${num_olts} |
| Set Suite Variable ${list_olts} |
| Set Suite Variable ${olt_serial_number} |
| Set Suite Variable ${olt_ip} |
| Set Suite Variable ${olt_user} |
| Set Suite Variable ${olt_pass} |
| Set Suite Variable ${k8s_node_ip} |
| Set Suite Variable ${k8s_node_user} |
| Set Suite Variable ${k8s_node_pass} |
| @{container_list}= Create List adapter-open-olt adapter-open-onu voltha-api-server |
| ... voltha-ro-core voltha-rw-core-11 voltha-rw-core-12 voltha-ofagent |
| Set Suite Variable ${container_list} |
| ${datetime}= Get Current Date |
| Set Suite Variable ${datetime} |
| |
| Setup Test |
| [Documentation] Pre-test Setup |
| #test for empty device list |
| Test Empty Device List |
| Sleep 60s |
| #create/preprovision device |
| #read all bbsims |
| ${rc} ${num_bbsims} Run And Return Rc And Output kubectl get pod -n voltha | grep bbsim | wc -l |
| Should Be Equal As Integers ${rc} 0 |
| Should Not Be Empty ${num_bbsims} |
| Should Not Be Equal As Integers ${num_bbsims} 0 |
| Run Keyword Unless ${has_dataplane} Set Suite Variable ${num_olts} ${num_bbsims} |
| FOR ${I} IN RANGE 0 ${num_olts} |
| ${olt_device_id}= Create Device ${list_olts}[${I}][ip] ${OLT_PORT} |
| Set Suite Variable ${olt_device_id} |
| #validate olt states |
| Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN |
| ... ${olt_device_id} |
| Sleep 5s |
| Enable Device ${olt_device_id} |
| Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE |
| ... ${olt_serial_number} |
| ${logical_id}= Get Logical Device ID From SN ${olt_serial_number} |
| Set Suite Variable ${logical_id} |
| END |
| |
| Do Sanity Test |
| [Arguments] ${host_src} ${host_dst} |
| [Documentation] This keyword performs Sanity Test Procedure |
| ... Sanity test performs authentication, dhcp and pings for all the ONUs given for the POD |
| ... This keyword can be used to call in any other tests where sanity check is required |
| ... and avoids duplication of code. |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number} |
| Set Global Variable ${of_id} |
| ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get NNI Port in ONOS ${of_id} |
| Set Global Variable ${nni_port} |
| ${num_onus}= Get Length ${host_src} |
| ${num_onus}= Convert to String ${num_onus} |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${host_src[${I}]} |
| ${dst}= Set Variable ${host_dst[${I}]} |
| Run Keyword and Ignore Error Collect Logs |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| # Check ONU port is Enabled in ONOS |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify ONU Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| # Verify EAPOL flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify Eapol Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| # Perform Authentication |
| ${wpa_log}= Run Keyword If ${has_dataplane} Catenate SEPARATOR=. |
| ... /tmp/wpa ${src['dp_iface_name']} log |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate Authentication True |
| ... ${src['dp_iface_name']} wpa_supplicant.conf ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} ${wpa_log} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Verify ONU in AAA-Users ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Execute ONOS CLI Command ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify that no pending flows exist for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify No Pending Flows For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| # Verify subscriber access flows are added for the ONU port |
| # Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| # ... Verify Subscriber Access Flows Added For ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| # ... ${onu_port} ${nni_port} ${src['c_tag']} ${src['s_tag']} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Validate Subscriber DHCP Allocation ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${onu_port} |
| Run Keyword and Ignore Error Get Device Output from Voltha ${onu_device_id} |
| Run Keyword and Ignore Error Collect Logs |
| END |
| |