| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # use bash for pushd/popd, and to fail quickly. virtualenv's activate |
| # has undefined variables, so no -u |
| SHELL := bash -e -o pipefail |
| |
| ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST)))) |
| |
| # Configuration and lists of files for linting/testing |
| VERSION ?= $(shell cat ./VERSION) |
| LINT_ARGS ?= --verbose --configure LineTooLong:130 -e LineTooLong \ |
| --configure TooManyTestSteps:60 -e TooManyTestSteps \ |
| --configure TooManyTestCases:50 -e TooManyTestCases \ |
| --configure TooFewTestSteps:1 \ |
| --configure TooFewKeywordSteps:1 \ |
| --configure FileTooLong:1500 -e FileTooLong \ |
| -e TrailingWhitespace |
| |
| PYTHON_FILES := $(wildcard libraries/*.py) |
| ROBOT_FILES := $(shell find . -name *.robot -print) |
| YAML_FILES := $(shell find ./tests -type f \( -name *.yaml -o -name *.yml \) -print) |
| JSON_FILES := $(shell find ./tests -name *.json -print) |
| |
| # Robot config |
| ROBOT_SANITY_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind.yaml |
| ROBOT_SANITY_DT_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-dt.yaml |
| ROBOT_SANITY_MULTIPLE_OLT_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-2OLTx2ONUx2PON.yaml |
| ROBOT_SANITY_DT_MULTIPLE_OLT_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-2OLTx2ONUx2PON-dt.yaml |
| ROBOT_SANITY_TT_MULTIPLE_OLT_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-2OLTx2ONUx2PON-tt.yaml |
| ROBOT_FAIL_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind.yaml |
| ROBOT_SANITY_MULT_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-2x2.yaml |
| ROBOT_SCALE_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-16.yaml |
| ROBOT_SCALE_MULT_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-8x2.yaml |
| ROBOT_SCALE_MULT_ONU_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-8x8.yaml |
| ROBOT_DEBUG_LOG_OPT ?= |
| ROBOT_MISC_ARGS ?= |
| ROBOT_SANITY_TT_SINGLE_PON_FILE ?= $(ROOT_DIR)/tests/data/bbsim-kind-tt.yaml |
| ROBOT_DMI_SINGLE_BBSIM_FILE ?= $(ROOT_DIR)/tests/data/dmi-components-bbsim.yaml |
| ROBOT_DMI_SINGLE_ADTRAN_FILE ?= $(ROOT_DIR)/tests/data/dmi-components-adtran.yaml |
| ROBOT_SW_UPGRADE_FILE ?= $(ROOT_DIR)/tests/data/software-upgrade.yaml |
| ROBOT_PM_DATA_FILE ?= $(ROOT_DIR)/tests/data/pm-data.yaml |
| |
| # for backwards compatibility |
| sanity-kind: sanity-single-kind |
| |
| # to simplify ci |
| sanity-kind-att: sanity-single-kind |
| |
| # for scale pipeline |
| voltha-scale: ROBOT_MISC_ARGS += -i activation -v NAMESPACE:voltha $(ROBOT_DEBUG_LOG_OPT) |
| voltha-scale: voltha-scale-test |
| |
| # target to invoke DT Workflow Sanity |
| sanity-kind-dt: ROBOT_MISC_ARGS += -i sanityDt $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| sanity-kind-dt: ROBOT_FILE := Voltha_DT_PODTests.robot |
| sanity-kind-dt: voltha-dt-test |
| |
| functional-single-kind: ROBOT_MISC_ARGS += -i sanityORfunctional -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| functional-single-kind: bbsim-kind |
| |
| # to simplify ci |
| functional-single-kind-att: functional-single-kind |
| |
| # target to invoke DT Workflow Functional scenarios |
| functional-single-kind-dt: ROBOT_MISC_ARGS += -i sanityDtORfunctionalDt -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| functional-single-kind-dt: ROBOT_FILE := Voltha_DT_PODTests.robot |
| functional-single-kind-dt: voltha-dt-test |
| |
| # target to invoke TT Workflow Sanity |
| sanity-kind-tt: ROBOT_MISC_ARGS += -i sanityTT $(ROBOT_DEBUG_LOG_OPT) |
| sanity-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| sanity-kind-tt: ROBOT_FILE := Voltha_TT_PODTests.robot |
| sanity-kind-tt: voltha-tt-test |
| |
| # target to invoke TT Workflow Functional scenarios |
| functional-single-kind-tt: ROBOT_MISC_ARGS += -i sanityTTORfunctional -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| functional-single-kind-tt: ROBOT_FILE := Voltha_TT_PODTests.robot |
| functional-single-kind-tt: voltha-tt-test |
| |
| # target to invoke multiple OLTs Functional scenarios |
| functional-multi-olt: ROBOT_MISC_ARGS += -i sanityORfunctional -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| functional-multi-olt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| functional-multi-olt: ROBOT_FILE := Voltha_PODTests.robot |
| functional-multi-olt: voltha-test |
| |
| # target to invoke test with openonu go adapter applying 1T1GEM tech-profile at single ONU |
| 1t1gem-openonu-go-adapter-test: ROBOT_MISC_ARGS += -v techprofile:1T1GEM |
| 1t1gem-openonu-go-adapter-test: openonu-go-adapter-test |
| |
| # target to invoke test with openonu go adapter applying 1T4GEM tech-profile at single ONU |
| 1t4gem-openonu-go-adapter-test: ROBOT_MISC_ARGS += -v techprofile:1T4GEM |
| 1t4gem-openonu-go-adapter-test: openonu-go-adapter-test |
| |
| # target to invoke test with openonu go adapter applying 1T8GEM tech-profile at single ONU |
| 1t8gem-openonu-go-adapter-test: ROBOT_MISC_ARGS += -v techprofile:1T8GEM |
| 1t8gem-openonu-go-adapter-test: openonu-go-adapter-test |
| |
| # target to invoke openonu go adapter |
| openonu-go-adapter-test: ROBOT_MISC_ARGS += -v state2test:omci-flows-pushed -v testmode:SingleStateTime |
| openonu-go-adapter-test: ROBOT_MISC_ARGS += -v logging:True -i sanityOnuGo -i functionalOnuGo |
| openonu-go-adapter-test: ROBOT_MISC_ARGS += -e notreadyOnuGo -X $(ROBOT_DEBUG_LOG_OPT) |
| openonu-go-adapter-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| openonu-go-adapter-test: ROBOT_FILE := Voltha_ONUStateTests.robot |
| openonu-go-adapter-test: openonu-go-adapter-tests |
| |
| # target to invoke test with openonu go adapter applying MIB-Upload-Templating |
| mib-upload-templating-openonu-go-adapter-test: ROBOT_MISC_ARGS += -v logging:True -i functionalOnuGo |
| mib-upload-templating-openonu-go-adapter-test: ROBOT_MISC_ARGS += -e notreadyOnuGo -X $(ROBOT_DEBUG_LOG_OPT) |
| mib-upload-templating-openonu-go-adapter-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULT_PON_FILE) |
| mib-upload-templating-openonu-go-adapter-test: ROBOT_FILE := Voltha_ONUTemplateTests.robot |
| mib-upload-templating-openonu-go-adapter-test: openonu-go-adapter-tests |
| |
| # target to invoke test with openonu go adapter applying 1T8GEM tech-profile at single ONU with OMCI hardening |
| # timeout is determined for omci_response_rate=9 and omci_timeout=1s |
| openonu-go-adapter-omci-hardening-passed-test: ROBOT_MISC_ARGS += -v timeout:180s -v techprofile:1T8GEM |
| openonu-go-adapter-omci-hardening-passed-test: openonu-go-adapter-test |
| |
| # target to invoke openonu go adapter failed state test at single ONU with OMCI hardening |
| # test should show in case of too small omci_response_rate (<=7) in BBSIM that OMCI hardening does not work |
| # test is PASS when ONU does not leave state 'starting-openomci' |
| openonu-go-adapter-omci-hardening-failed-test: ROBOT_MISC_ARGS += -v logging:True -v timeout:300s -i NegativeStateTestOnuGo |
| openonu-go-adapter-omci-hardening-failed-test: ROBOT_MISC_ARGS += -e notreadyOnuGo -X $(ROBOT_DEBUG_LOG_OPT) |
| openonu-go-adapter-omci-hardening-failed-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| openonu-go-adapter-omci-hardening-failed-test: ROBOT_FILE := Voltha_ONUNegativeStateTests.robot |
| openonu-go-adapter-omci-hardening-failed-test: openonu-go-adapter-tests |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU with ATT workflow (default workflow) |
| reconcile-openonu-go-adapter-test-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| reconcile-openonu-go-adapter-test-att: reconcile-openonu-go-adapter-tests-att |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU with DT workflow |
| reconcile-openonu-go-adapter-test-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| reconcile-openonu-go-adapter-test-dt: reconcile-openonu-go-adapter-tests-dt |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU with TT workflow |
| reconcile-openonu-go-adapter-test-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| reconcile-openonu-go-adapter-test-tt: reconcile-openonu-go-adapter-tests-tt |
| |
| # target to invoke reconcile tests with openonu go adapter with multiple OLTs scenario with ATT workflow (default workflow) |
| reconcile-openonu-go-adapter-multi-olt-test-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| reconcile-openonu-go-adapter-multi-olt-test-att: reconcile-openonu-go-adapter-tests-att |
| |
| # target to invoke reconcile tests with openonu go adapter with multiple OLTs scenario with DT workflow |
| reconcile-openonu-go-adapter-multi-olt-test-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_MULTIPLE_OLT_FILE) |
| reconcile-openonu-go-adapter-multi-olt-test-dt: reconcile-openonu-go-adapter-tests-dt |
| |
| # target to invoke reconcile tests with openonu go adapter with multiple OLTs scenario with TT workflow |
| reconcile-openonu-go-adapter-multi-olt-test-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTIPLE_OLT_FILE) |
| reconcile-openonu-go-adapter-multi-olt-test-tt: reconcile-openonu-go-adapter-tests-tt |
| |
| # target to invoke reconcile tests with openonu go adapter with ATT workflow |
| reconcile-openonu-go-adapter-tests-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| reconcile-openonu-go-adapter-tests-att: reconcile-openonu-go-adapter-tests |
| |
| # target to invoke reconcile tests with openonu go adapter with DT workflow |
| reconcile-openonu-go-adapter-tests-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| reconcile-openonu-go-adapter-tests-dt: reconcile-openonu-go-adapter-tests |
| |
| # target to invoke reconcile tests with openonu go adapter with TT workflow |
| reconcile-openonu-go-adapter-tests-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| reconcile-openonu-go-adapter-tests-tt: reconcile-openonu-go-adapter-tests |
| |
| # target to invoke reconcile tests with openonu go adapter at single ONU resp. multiple OLTs |
| reconcile-openonu-go-adapter-tests: ROBOT_MISC_ARGS += -v logging:True -i functionalOnuGo |
| reconcile-openonu-go-adapter-tests: ROBOT_MISC_ARGS += -e notreadyOnuGo -X $(ROBOT_DEBUG_LOG_OPT) |
| reconcile-openonu-go-adapter-tests: ROBOT_FILE := Voltha_ONUReconcileTests.robot |
| reconcile-openonu-go-adapter-tests: openonu-go-adapter-tests |
| |
| # target to invoke test with openonu go adapter applying 1T1GEM tech-profile with multiple OLTs scenarios with ATT workflow |
| 1t1gem-openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v techprofile:1T1GEM |
| 1t1gem-openonu-go-adapter-multi-olt-test: openonu-go-adapter-multi-olt-test |
| |
| # target to invoke test with openonu go adapter applying 1T4GEM tech-profile with multiple OLTs scenarios with ATT workflow |
| 1t4gem-openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v techprofile:1T4GEM |
| 1t4gem-openonu-go-adapter-multi-olt-test: openonu-go-adapter-multi-olt-test |
| |
| # target to invoke test with openonu go adapter applying 1T8GEM tech-profile with multiple OLTs scenarios with ATT workflow |
| 1t8gem-openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v techprofile:1T8GEM |
| 1t8gem-openonu-go-adapter-multi-olt-test: openonu-go-adapter-multi-olt-test |
| |
| # target to invoke test with openonu go adapter (applying 1T1GEM tech-profile) with multiple OLTs scenarios with ATT workflow |
| openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v state2test:omci-flows-pushed -v testmode:SingleStateTime |
| openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -v logging:True -i sanityOnuGo -i functionalOnuGo |
| openonu-go-adapter-multi-olt-test: ROBOT_MISC_ARGS += -e notreadyOnuGo -X $(ROBOT_DEBUG_LOG_OPT) |
| openonu-go-adapter-multi-olt-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| openonu-go-adapter-multi-olt-test: ROBOT_FILE := Voltha_ONUStateTests.robot |
| openonu-go-adapter-multi-olt-test: openonu-go-adapter-tests |
| |
| sanity-single-kind: ROBOT_MISC_ARGS += -i sanity $(ROBOT_DEBUG_LOG_OPT) |
| sanity-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| sanity-single-kind: bbsim-kind |
| sanity-bbsim-att: ROBOT_MISC_ARGS += -v logging:True -v workflow:ATT |
| sanity-bbsim-att: sanity-bbsim |
| |
| sanity-bbsim-dt: ROBOT_MISC_ARGS += -v logging:True -v workflow:DT |
| sanity-bbsim-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| sanity-bbsim-dt: ROBOT_FILE := Voltha_BBSimTests.robot |
| sanity-bbsim-dt: voltha-bbsim-test |
| |
| sanity-bbsim-tt: ROBOT_MISC_ARGS += -v logging:True -v workflow:TT |
| sanity-bbsim-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| sanity-bbsim-tt: ROBOT_FILE := Voltha_BBSimTests.robot |
| sanity-bbsim-tt: voltha-bbsim-test |
| |
| sanity-bbsim: ROBOT_MISC_ARGS += -i bbsimSanity $(ROBOT_DEBUG_LOG_OPT) |
| sanity-bbsim: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| sanity-bbsim: ROBOT_FILE := Voltha_BBSimTests.robot |
| sanity-bbsim: voltha-bbsim-test |
| |
| voltha-bbsim-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/bbsim ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| rwcore-restart-single-kind: ROBOT_MISC_ARGS += -X -i functionalANDrwcore-restart $(ROBOT_DEBUG_LOG_OPT) |
| rwcore-restart-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_FAIL_SINGLE_PON_FILE) |
| rwcore-restart-single-kind: ROBOT_FILE := Voltha_FailureScenarios.robot |
| rwcore-restart-single-kind: voltha-test |
| |
| single-kind: ROBOT_MISC_ARGS += -X -i $(TEST_TAGS) $(ROBOT_DEBUG_LOG_OPT) |
| single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| single-kind: ROBOT_FILE := Voltha_PODTests.robot |
| single-kind: voltha-test |
| |
| sanity-multi-kind: ROBOT_MISC_ARGS += -i sanity $(ROBOT_DEBUG_LOG_OPT) |
| sanity-multi-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULT_PON_FILE) |
| sanity-multi-kind: bbsim-kind |
| |
| functional-multi-kind: ROBOT_MISC_ARGS += -i sanityORfunctional $(ROBOT_DEBUG_LOG_OPT) |
| functional-multi-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULT_PON_FILE) |
| functional-multi-kind: bbsim-kind |
| |
| bbsim-kind: ROBOT_MISC_ARGS += -X |
| bbsim-kind: ROBOT_FILE := Voltha_PODTests.robot |
| bbsim-kind: voltha-test |
| |
| scale-single-kind: ROBOT_MISC_ARGS += -i active $(ROBOT_DEBUG_LOG_OPT) |
| scale-single-kind: ROBOT_CONFIG_FILE := $(ROBOT_SCALE_SINGLE_PON_FILE) |
| scale-single-kind: bbsim-scale-kind |
| |
| scale-multi-kind: ROBOT_MISC_ARGS += -i active $(ROBOT_DEBUG_LOG_OPT) |
| scale-multi-kind: ROBOT_CONFIG_FILE := $(ROBOT_SCALE_MULT_PON_FILE) |
| scale-multi-kind: bbsim-scale-kind |
| |
| bbsim-scale-kind: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-scale-kind: ROBOT_FILE := Voltha_ScaleFunctionalTests.robot |
| bbsim-scale-kind: voltha-test |
| |
| #Only supported in full mode |
| system-scale-test: ROBOT_FILE := K8S_SystemTest.robot |
| system-scale-test: ROBOT_MISC_ARGS += -X -i functional $(ROBOT_DEBUG_LOG_OPT) -v teardown_device:True |
| system-scale-test: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULT_PON_FILE) |
| system-scale-test: voltha-test |
| |
| failure-test: ROBOT_MISC_ARGS += -X -i FailureTest $(ROBOT_DEBUG_LOG_OPT) |
| failure-test: ROBOT_FILE := K8S_SystemTest.robot |
| failure-test: ROBOT_CONFIG_FILE := $(ROBOT_FAIL_SINGLE_PON_FILE) |
| failure-test: voltha-test |
| |
| bbsim-alarms-kind: ROBOT_MISC_ARGS += -X -i active |
| bbsim-alarms-kind: ROBOT_FILE := Voltha_AlarmTests.robot |
| bbsim-alarms-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| bbsim-alarms-kind: voltctl-docker-image-build voltctl-docker-image-install-kind voltha-test |
| |
| bbsim-errorscenarios: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-errorscenarios: ROBOT_FILE := Voltha_ErrorScenarios.robot |
| bbsim-errorscenarios: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| bbsim-errorscenarios: voltha-test |
| |
| bbsim-multiolt-errorscenarios: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-multiolt-errorscenarios: ROBOT_FILE := Voltha_ErrorScenarios.robot |
| bbsim-multiolt-errorscenarios: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| bbsim-multiolt-errorscenarios: voltha-test |
| |
| bbsim-errorscenarios-dt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) |
| bbsim-errorscenarios-dt: ROBOT_FILE := Voltha_ErrorScenarios.robot |
| bbsim-errorscenarios-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| bbsim-errorscenarios-dt: voltha-test |
| |
| bbsim-failurescenarios: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e PhysicalOLTReboot |
| bbsim-failurescenarios: ROBOT_FILE := Voltha_FailureScenarios.robot |
| bbsim-failurescenarios: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| bbsim-failurescenarios: voltha-test |
| |
| bbsim-multiolt-failurescenarios: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e PhysicalOLTReboot |
| bbsim-multiolt-failurescenarios: ROBOT_FILE := Voltha_FailureScenarios.robot |
| bbsim-multiolt-failurescenarios: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| bbsim-multiolt-failurescenarios: voltha-test |
| |
| bbsim-multiolt-kind: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e MultiOLTPhysicalReboot |
| bbsim-multiolt-kind: ROBOT_FILE := Voltha_MultiOLT_Tests.robot |
| bbsim-multiolt-kind: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| bbsim-multiolt-kind: voltha-test |
| |
| bbsim-multiolt-kind-dt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e MultiOLTPhysicalRebootDt |
| bbsim-multiolt-kind-dt: ROBOT_FILE := Voltha_DT_MultiOLT_Tests.robot |
| bbsim-multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| bbsim-multiolt-kind-dt: voltha-dt-test |
| |
| multiolt-kind-dt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -i functionalDt |
| multiolt-kind-dt: ROBOT_FILE := Voltha_DT_MultiOLT_Tests.robot |
| multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| multiolt-kind-dt: voltha-dt-test |
| |
| bbsim-failurescenarios-dt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitchOnuRebootDt -e PhysicalOltRebootDt |
| bbsim-failurescenarios-dt: ROBOT_FILE := Voltha_DT_FailureScenarios.robot |
| bbsim-failurescenarios-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| bbsim-failurescenarios-dt: voltha-dt-test |
| |
| bbsim-failurescenarios-tt: ROBOT_MISC_ARGS += -X $(ROBOT_DEBUG_LOG_OPT) -e PowerSwitch -e PhysicalOltRebootTT |
| bbsim-failurescenarios-tt: ROBOT_FILE := Voltha_TT_FailureScenarios.robot |
| bbsim-failurescenarios-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| bbsim-failurescenarios-tt: voltha-tt-test |
| |
| voltha-test: ROBOT_MISC_ARGS += -e notready --noncritical non-critical |
| |
| voltha-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/functional ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| bbsim-dmi-hw-management-test: ROBOT_MISC_ARGS += -e notreadyDMI -i functionalDMI -e bbsimUnimplementedDMI |
| bbsim-dmi-hw-management-test: ROBOT_FILE := dmi-hw-management.robot |
| bbsim-dmi-hw-management-test: ROBOT_CONFIG_FILE := $(ROBOT_DMI_SINGLE_BBSIM_FILE) |
| bbsim-dmi-hw-management-test: voltha-dmi-test |
| |
| voltha-dmi-hw-management-test: ROBOT_MISC_ARGS += -e notreadyDMI -i functionalDMI |
| voltha-dmi-hw-management-test: ROBOT_FILE := dmi-hw-management.robot |
| voltha-dmi-hw-management-test: ROBOT_CONFIG_FILE := $(ROBOT_DMI_SINGLE_ADTRAN_FILE) |
| voltha-dmi-hw-management-test: voltha-dmi-test |
| |
| voltha-dmi-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/dmi-interface ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| # target to invoke single ONU pm data scenarios in ATT workflow |
| voltha-pm-data-single-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-pm-data-single-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| voltha-pm-data-single-kind-att: voltha-pm-data-tests |
| |
| # target to invoke single ONU pm data scenarios in DT workflow |
| voltha-pm-data-single-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| voltha-pm-data-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| voltha-pm-data-single-kind-dt: voltha-pm-data-tests |
| |
| # target to invoke single ONU pm data scenarios in TT workflow |
| voltha-pm-data-single-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| voltha-pm-data-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| voltha-pm-data-single-kind-tt: voltha-pm-data-tests |
| |
| # target to invoke multiple OLTs pm data scenarios in ATT workflow |
| voltha-pm-data-multiolt-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-pm-data-multiolt-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| voltha-pm-data-multiolt-kind-att: voltha-pm-data-tests |
| |
| # target to invoke multiple OLTs pm data scenarios in DT workflow |
| voltha-pm-data-multiolt-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| voltha-pm-data-multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_MULTIPLE_OLT_FILE) |
| voltha-pm-data-multiolt-kind-dt: voltha-pm-data-tests |
| |
| # target to invoke multiple OLTs pm data scenarios in TT workflow |
| voltha-pm-data-multiolt-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| voltha-pm-data-multiolt-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTIPLE_OLT_FILE) |
| voltha-pm-data-multiolt-kind-tt: voltha-pm-data-tests |
| |
| voltha-pm-data-tests: ROBOT_MISC_ARGS += -i functional -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| voltha-pm-data-tests: ROBOT_PM_CONFIG_FILE := $(ROBOT_PM_DATA_FILE) |
| voltha-pm-data-tests: ROBOT_FILE := Voltha_ONUPMTests.robot |
| voltha-pm-data-tests: voltha-pm-data-test |
| |
| voltha-pm-data-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/pm-data ;\ |
| robot -V $(ROBOT_CONFIG_FILE) -V $(ROBOT_PM_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| # target to invoke single ONU OMCI Get scenarios in ATT workflow |
| voltha-onu-omci-get-single-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-onu-omci-get-single-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_SINGLE_PON_FILE) |
| voltha-onu-omci-get-single-kind-att: voltha-onu-omci-get-tests |
| |
| # target to invoke single ONU OMCI Get scenarios in DT workflow |
| voltha-onu-omci-get-single-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| voltha-onu-omci-get-single-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_SINGLE_PON_FILE) |
| voltha-onu-omci-get-single-kind-dt: voltha-onu-omci-get-tests |
| |
| # target to invoke single ONU OMCI Geta scenarios in TT workflow |
| voltha-onu-omci-get-single-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| voltha-onu-omci-get-single-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_SINGLE_PON_FILE) |
| voltha-onu-omci-get-single-kind-tt: voltha-onu-omci-get-tests |
| |
| # target to invoke multiple OLTs OMCI Get scenarios in ATT workflow |
| voltha-onu-omci-get-multiolt-kind-att: ROBOT_MISC_ARGS += -v workflow:ATT |
| voltha-onu-omci-get-multiolt-kind-att: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_MULTIPLE_OLT_FILE) |
| voltha-onu-omci-get-multiolt-kind-att: voltha-onu-omci-get-tests |
| |
| # target to invoke multiple OLTs OMCI Get scenarios in DT workflow |
| voltha-onu-omci-get-multiolt-kind-dt: ROBOT_MISC_ARGS += -v workflow:DT |
| voltha-onu-omci-get-multiolt-kind-dt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_DT_MULTIPLE_OLT_FILE) |
| voltha-onu-omci-get-multiolt-kind-dt: voltha-onu-omci-get-tests |
| |
| # target to invoke multiple OLTs OMCI Get scenarios in TT workflow |
| voltha-onu-omci-get-multiolt-kind-tt: ROBOT_MISC_ARGS += -v workflow:TT |
| voltha-onu-omci-get-multiolt-kind-tt: ROBOT_CONFIG_FILE := $(ROBOT_SANITY_TT_MULTIPLE_OLT_FILE) |
| voltha-onu-omci-get-multiolt-kind-tt: voltha-onu-omci-get-tests |
| |
| voltha-onu-omci-get-tests: ROBOT_MISC_ARGS += -i functionalOnuGo -e PowerSwitch $(ROBOT_DEBUG_LOG_OPT) |
| voltha-onu-omci-get-tests: ROBOT_FILE := Voltha_ONUOmciGetTest.robot |
| voltha-onu-omci-get-tests: openonu-go-adapter-tests |
| |
| # ONOS Apps to test for Software Upgrade need to be passed in the 'onos_apps_under_test' variable in format: |
| # <app-name>,<version>,<oar-url>*<app-name>,<version>,<oar-url>* |
| onos-app-upgrade-test: ROBOT_MISC_ARGS += -e notready -i functional |
| onos-app-upgrade-test: ROBOT_FILE := ONOS_AppsUpgrade.robot |
| onos-app-upgrade-test: ROBOT_CONFIG_FILE := $(ROBOT_SW_UPGRADE_FILE) |
| onos-app-upgrade-test: software-upgrade-test |
| |
| # Voltha Components to test for Software Upgrade need to be passed in the 'voltha_comps_under_test' variable in format: |
| # <comp-label>,<comp-container>,<comp-image>*<comp-label>,<comp-container>,<comp-image>* |
| voltha-comp-upgrade-test: ROBOT_MISC_ARGS += -e notready -i functional |
| voltha-comp-upgrade-test: ROBOT_FILE := Voltha_ComponentsUpgrade.robot |
| voltha-comp-upgrade-test: ROBOT_CONFIG_FILE := $(ROBOT_SW_UPGRADE_FILE) |
| voltha-comp-upgrade-test: software-upgrade-test |
| |
| # Requirement: Pass ONU image details in following parameters |
| # image_version, image_url, image_vendor, image_activate_on_success, image_commit_on_success, image_crc |
| onu-upgrade-test: ROBOT_MISC_ARGS += -e notready -i functional |
| onu-upgrade-test: ROBOT_FILE := ONU_Upgrade.robot |
| onu-upgrade-test: ROBOT_CONFIG_FILE := $(ROBOT_SW_UPGRADE_FILE) |
| onu-upgrade-test: software-upgrade-test |
| |
| software-upgrade-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/software-upgrades ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-dt-test: ROBOT_MISC_ARGS += -e notready --noncritical non-critical |
| |
| voltha-dt-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/dt-workflow ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-tt-test: ROBOT_MISC_ARGS += -e notready |
| |
| voltha-tt-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/tt-workflow ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| voltha-scale-test: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/scale ;\ |
| robot $(ROBOT_MISC_ARGS) Voltha_Scale_Tests.robot |
| |
| openonu-go-adapter-tests: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| cd tests/openonu-go-adapter ;\ |
| robot -V $(ROBOT_CONFIG_FILE) $(ROBOT_MISC_ARGS) $(ROBOT_FILE) |
| |
| |
| # self-test, lint, and setup targets |
| |
| # virtualenv for the robot tools |
| # VOL-2724 Invoke pip via python3 to avoid pathname too long on QA jobs |
| vst_venv: |
| virtualenv -p python3 $@ ;\ |
| source ./$@/bin/activate ;\ |
| python -m pip install -r requirements.txt |
| |
| test: lint |
| |
| lint: lint-robot lint-python lint-yaml lint-json |
| |
| lint-robot: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| rflint $(LINT_ARGS) $(ROBOT_FILES) |
| |
| # check deps for format and python3 cleanliness |
| lint-python: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| pylint --py3k $(PYTHON_FILES) ;\ |
| flake8 --max-line-length=99 --count $(PYTHON_FILES) |
| |
| lint-yaml: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| yamllint -s $(YAML_FILES) |
| |
| lint-json: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| for jsonfile in $(JSON_FILES); do \ |
| echo "Validating json file: $$jsonfile" ;\ |
| python -m json.tool $$jsonfile > /dev/null ;\ |
| done |
| |
| # tidy target will be more useful once issue with removing leading comments |
| # is resolved: https://github.com/robotframework/robotframework/issues/3263 |
| tidy-robot: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| python -m robot.tidy --inplace $(ROBOT_FILES); |
| |
| # Install the 'kail' tool if needed: https://github.com/boz/kail |
| KAIL_PATH ?= /usr/local/bin |
| $(KAIL_PATH)/kail: |
| bash <( curl -sfL https://raw.githubusercontent.com/boz/kail/master/godownloader.sh) -b /tmp |
| mv /tmp/kail $(KAIL_PATH) |
| |
| ## Variables for gendocs |
| TEST_SOURCE := $(wildcard tests/*/*.robot) |
| TEST_BASENAME := $(basename $(TEST_SOURCE)) |
| TEST_DIRS := $(dir $(TEST_SOURCE)) |
| |
| LIB_SOURCE := $(wildcard libraries/*.robot) |
| LIB_BASENAME := $(basename $(LIB_SOURCE)) |
| LIB_DIRS := $(dir $(LIB_SOURCE)) |
| |
| .PHONY: gendocs lint test |
| # In future explore use of --docformat REST - integration w/Sphinx? |
| gendocs: vst_venv |
| source ./$</bin/activate ; set -u ;\ |
| mkdir -p $@ ;\ |
| for dir in ${LIB_DIRS}; do mkdir -p $@/$$dir; done;\ |
| for dir in ${LIB_BASENAME}; do\ |
| python -m robot.libdoc --format HTML $$dir.robot $@/$$dir.html ;\ |
| done ;\ |
| for dir in ${TEST_DIRS}; do mkdir -p $@/$$dir; done;\ |
| for dir in ${TEST_BASENAME}; do\ |
| python -m robot.testdoc $$dir.robot $@/$$dir.html ;\ |
| done |
| |
| clean: |
| find . -name output.xml -print |
| |
| clean-all: clean |
| rm -rf vst_venv gendocs |
| |
| voltctl-docker-image-build: |
| cd docker && docker build -t opencord/voltctl:local -f Dockerfile.voltctl . |
| |
| voltctl-docker-image-install-kind: |
| @if [ "`kind get clusters | grep kind`" = '' ]; then echo "no kind cluster found" && exit 1; fi |
| kind load docker-image --name `kind get clusters | grep kind` opencord/voltctl:local |