blob: 05108ba6381e0cb85e1da082243507537781e201 [file] [log] [blame]
#Copyright 2017-present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
Documentation Test suite that engages a larger number of ONU at the same which makes it a more realistic test
... It is addaptable to either BBSim or Real H/W using a configuration file
Suite Setup Setup Suite
Suite Teardown Teardown Suite
Library Collections
Library String
Library OperatingSystem
Library XML
Library RequestsLibrary
Library ../../libraries/DependencyLibrary.py
Resource ../../libraries/onos.robot
Resource ../../libraries/voltctl.robot
Resource ../../libraries/utils.robot
Resource ../../libraries/k8s.robot
Resource ../../variables/variables.robot
*** Variables ***
${timeout} 60s
${long_timeout} 420
${of_id} 0
${logical_id} 0
${has_dataplane} True
${external_libs} True
${teardown_device} False
*** Test Cases ***
Activate Devices OLT/ONU
[Documentation] Validate deployment -> Empty Device List
... create and enable device -> Preprovision and Enable
... re-validate deployment -> Active OLT
[Tags] active
#test for empty device list
${length}= Test Empty Device List
Should Be Equal As Integers ${length} 0
#create/preprovision device
${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
Set Global Variable ${olt_device_id}
#validate olt states
Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN ${EMPTY}
... ${olt_device_id}
#enable device
Enable Device ${olt_device_id}
#validate olt states
Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE ${EMPTY}
... ${olt_device_id}
ONU Discovery
[Documentation] Discover lists of ONUS, their Serial Numbers and device id
[Tags] active
#build onu sn list
${List_ONU_Serial} Create List
Set Suite Variable ${List_ONU_Serial}
Build ONU SN List ${List_ONU_Serial}
Log ${List_ONU_Serial}
#validate onu states
Wait Until Keyword Succeeds ${long_timeout} 20s Validate ONU Devices ENABLED ACTIVE REACHABLE
... ${List_ONU_Serial}
Validate Device's Ports and Flows
[Documentation] Verify Ports and Flows listed for OLT and ONUs
... For OLT we validate the port types and numbers and for flows we simply verify that their numbers > 0
... For each ONU, we validate the port types and numbers for each and for flows.
... For flows they should be == 0 at this stage
[Tags] active
#validate olt port types
Validate OLT Port Types PON_OLT ETHERNET_NNI
#validate olt flows
Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows
#validate onu port types
Validate ONU Port Types ${List_ONU_Serial} PON_ONU ETHERNET_UNI
#validate onu flows
Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows ${List_ONU_Serial} ${num_onu_flows}
Validate Logical Device
[Documentation] Verify that logical device exists and then verify its ports and flows
[Tags] active
#Verify logical device exists
${logical_device_id}= Validate Logical Device
#Verify logical device ports
Validate Logical Device Ports ${logical_device_id}
#Verify logical device flows
Validate Logical Device Flows ${logical_device_id}
Validate Peer Devices
[Documentation] Verify that peer lists matches up between that of ${olt_device_id}
... and individual ONU device ids
[Tags] active
#Retrieve peer list from OLT
${olt_peer_list}= Create List
Retrieve Peer List From OLT ${olt_peer_list}
Log ${olt_peer_list}
#Validate OLT peer id list
Validate OLT Peer Id List ${olt_peer_list}
#Validate ONU peer ids
Validate ONU Peer Id ${olt_device_id} ${List_ONU_Serial}
*** Keywords ***
Setup Suite
[Documentation] Setup the whole test suite
# BBSim sanity test doesn't need these imports from other repositories
Run Keyword If ${external_libs} Import Library
... ${CURDIR}/../../../voltha/tests/atests/common/testCaseUtils.py
Run Keyword If ${external_libs} Import Resource
... ${CURDIR}/../../../cord-tester/src/test/cord-api/Framework/Subscriber.robot
Run Keyword If ${external_libs} Import Resource
... ${CURDIR}/../../../cord-tester/src/test/cord-api/Framework/OLT.robot
Run Keyword If ${external_libs} Import Resource
... ${CURDIR}/../../../cord-tester/src/test/cord-api/Framework/DHCP.robot
Run Keyword If ${external_libs} Import Resource
... ${CURDIR}/../../../cord-tester/src/test/cord-api/Framework/Kubernetes.robot
Set Global Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG}
Set Global Variable ${VOLTCTL_CONFIG} export VOLTCONFIG=%{VOLTCONFIG}
${k8s_node_ip}= Evaluate ${nodes}[0].get("ip")
${k8s_node_user}= Evaluate ${nodes}[0].get("user")
${k8s_node_pass}= Evaluate ${nodes}[0].get("pass")
Check CLI Tools Configured
${onos_auth}= Create List karaf karaf
${HEADERS} Create Dictionary Content-Type=application/json
Create Session ONOS http://${k8s_node_ip}:${ONOS_REST_PORT} auth=${ONOS_AUTH}
${olt_ip}= Evaluate ${olts}[0].get("ip")
${olt_user}= Evaluate ${olts}[0].get("user")
${olt_pass}= Evaluate ${olts}[0].get("pass")
${olt_serial_number}= Evaluate ${olts}[0].get("serial")
${num_onus}= Get Length ${hosts.src}
${num_onus}= Convert to String ${num_onus}
#send sadis file to onos
${sadis_file}= Evaluate ${sadis}.get("file")
Log To Console \nSadis File:${sadis_file}
Run Keyword Unless '${sadis_file}' is '${None}' Send File To Onos ${sadis_file} apps/
Set Suite Variable ${num_onus}
Set Suite Variable ${olt_serial_number}
Set Suite Variable ${olt_ip}
Set Suite Variable ${olt_user}
Set Suite Variable ${olt_pass}
Set Suite Variable ${k8s_node_ip}
Set Suite Variable ${k8s_node_user}
Set Suite Variable ${k8s_node_pass}
@{container_list}= Create List adapter-open-olt adapter-open-onu voltha-api-server
... voltha-ro-core voltha-rw-core-11 voltha-rw-core-12 voltha-ofagent
Set Suite Variable ${container_list}
${datetime}= Get Current Date
Set Suite Variable ${datetime}
Teardown Suite
[Documentation] Clean up devices if desired
... kills processes and cleans up interfaces on src+dst servers
Run Keyword If ${external_libs} Get ONOS Status ${k8s_node_ip}
Run Keyword If ${has_dataplane} Clean Up Linux
Run Keyword If ${external_libs} Log Kubernetes Containers Logs Since Time ${datetime} ${container_list}
Run Keyword If ${teardown_device} Delete Device and Verify
${length}= Run Keyword If ${teardown_device} Run Keyword And Return Test Empty Device List
Run Keyword If ${teardown_device} Should Be Equal As Integers ${length} 0
Run Keyword If ${teardown_device} Execute ONOS CLI Command ${k8s_node_ip} ${ONOS_SSH_PORT}
... device-remove ${of_id}
Clean Up Linux
[Documentation] Kill processes and clean up interfaces on src+dst servers
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src['ip']}
... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Run Keyword And Ignore Error Kill Linux Process [d]hclient ${src['ip']}
... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Run Keyword If '${dst['ip']}' != '${None}' Run Keyword And Ignore Error
... Kill Linux Process [d]hcpd ${dst['ip']} ${dst['user']}
... ${dst['pass']} ${dst['container_type']} ${dst['container_name']}
Delete IP Addresses from Interface on Remote Host ${src['dp_iface_name']} ${src['ip']}
... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Run Keyword If '${dst['ip']}' != '${None}' Delete Interface on Remote Host
... ${dst['dp_iface_name']}.${src['s_tag']} ${dst['ip']} ${dst['user']} ${dst['pass']}
... ${dst['container_type']} ${dst['container_name']}
END
Delete Device and Verify
[Documentation] Disable -> Delete devices via voltctl and verify its removed
${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
Should Be Equal As Integers ${rc} 0
Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device DISABLED UNKNOWN REACHABLE
... ${olt_serial_number}
${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device delete ${olt_device_id}
Should Be Equal As Integers ${rc} 0
Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${olt_device_id}