blob: 76708eab50083798176781c9ed5ef7d82a93cdfa [file] [log] [blame]
# Copyright 2017 - present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Tests can be enabled by passing the following tags:
# - [setup] Creates and enable the OLT devices
# - [activation] Checks that ONUs are active in VOLTHA and ports discevered in ONOS
# - [flow-before] Checks that flows are pushed (before subscriber provisioning)
# - [authentication] Checks that subscribers are correctly authenticated
# - [provision] Provision the data-plane flows for all the subscribers
# - [flow-after] Checks that flows are pushed (after subscriber provisioning)
# - [dhcp] Checks that subscribers have received an IP
#
# To run the full test:
# robot Voltha_Scale_Tests.robot
#
# To run only ceratain tests:
# robot -i activation -i flow-before Voltha_Scale_Tests.robot
#
# To exclude only ceratain tests:
# robot -e -i flow-before Voltha_Scale_Tests.robot
#
# Once te test complete you can extrapolate the results by using
# python extract-times.py
*** Settings ***
Documentation Collect measurements on VOLTHA performances
Suite Setup Setup Suite
#Test Setup Setup
#Test Teardown Teardown
Suite Teardown Teardown Suite
Library Collections
Library String
Library OperatingSystem
Library XML
Library Timer
Library RequestsLibrary
Library ../../libraries/DependencyLibrary.py
Resource ../../libraries/onos.robot
Resource ../../libraries/voltctl.robot
Resource ../../libraries/voltha.robot
Resource ../../libraries/flows.robot
Resource ../../libraries/k8s.robot
Resource ../../variables/variables.robot
*** Variables ***
${ONOS_SSH_IP} 127.0.0.1
${ONOS_SSH_PORT} 8101
# Scale pipeline values
${olt} 1
${pon} 1
${onu} 1
${enableLLDP} false
${enableFlowProvisioning} true
${enableSubscriberProvisioning} true
${workflow} att
${withEapol} false
${withDhcp} false
${withIgmp} false
# Per-test logging on failure is turned off by default; set this variable to enable
${container_log_dir} ${None}
*** Test Cases ***
Create and Enable devices
[Documentation] Create and enable the OLTs in VOLTHA
[Tags] setup
${olt_device_ids}= Create List
FOR ${INDEX} IN RANGE 0 ${olt}
${olt_device_id}= Create Device bbsim${INDEX} 50060 openolt
Enable Device ${olt_device_id}
Append To List ${olt_device_ids} ${olt_device_id}
END
Set Suite Variable ${olt_device_ids}
Onu Activation in VOLTHA
[Documentation] Check that all ONUs reach the ACTIVE/ENABLED state in VOLTHA
[Tags] non-critical activation plot-voltha-onus
Wait For ONUs In VOLTHA ${total_onus}
Port Discovery in ONOS
[Documentation] Check that all the UNI ports show up in ONOS
[Tags] non-critical activation plot-onos-ports
Wait for Ports in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus} BBSM
Flows validation in VOLTHA before subscriber provisioning
[Documentation] Check that all the flows has been stored in the logical device
[Tags] non-critical flow-before plot-voltha-flows-before
# NOTE fail the test immediately if we're trying to check flows without provisioning them
Should Be Equal ${enableFlowProvisioning} true
Wait for Logical Devices flows ${workflow} ${total_onus} ${olt} false
... ${withEapol} ${withDhcp} ${withIgmp}
Flows validation in VOLTHA Adapters before subscriber provisioning
[Documentation] Check that all flows has been store in devices of type openolt
[Tags] non-critical flow-before plot-voltha-openolt-flows-before
Should Be Equal ${enableFlowProvisioning} true
Wait for OpenOLT Devices flows ${workflow} ${total_onus} ${olt} false
... ${withEapol} ${withDhcp} ${withIgmp}
Flows validation in ONOS before subscriber provisioning
[Documentation] Check that all the flows has been acknowledged
[Tags] non-critical flow-before plot-onos-flows-before
# NOTE fail the test immediately if we're trying to check flows without provisioning them
Should Be Equal ${enableFlowProvisioning} true
Wait for all flows to in ADDED state ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
... ${workflow} ${total_onus} ${olt} false ${withEapol} ${withDhcp} ${withIgmp}
Wait for subscribers to be Authenticated
[Documentation] Check that all subscribers have successfully authenticated
[Tags] non-critical authentication plot-onos-auth
Wait for AAA Authentication ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus}
Provision subscribers
[Documentation] Provision data plane flows for all the subscribers
[Tags] non-critical provision
Should Be Equal ${enableSubscriberProvisioning} true
${olts}= List OLTs ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
FOR ${olt} IN @{olts}
Provision all subscribers on device ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt}
END
Flows validation in VOLTHA after subscriber provisioning
[Documentation] Check that all the flows has been stored in the logical device
[Tags] non-critical flow-after plot-voltha-flows-after
# NOTE fail the test immediately if we're trying to check flows without provisioning them
Should Be Equal ${enableFlowProvisioning} true
Wait for Logical Devices flows ${workflow} ${total_onus} ${olt} true
... ${withEapol} ${withDhcp} ${withIgmp}
Flows validation in VOLTHA Adapters after subscriber provisioning
[Documentation] Check that all flows has been store in devices of type openolt
[Tags] non-critical flow-after plot-voltha-openolt-flows-after
Should Be Equal ${enableFlowProvisioning} true
Wait for OpenOLT Devices flows ${workflow} ${total_onus} ${olt} true
... ${withEapol} ${withDhcp} ${withIgmp}
Flows validation in ONOS after subscriber provisioning
[Documentation] Check that all the flows has been acknowledged
[Tags] non-critical flow-after plot-onos-flows-after
# NOTE fail the test immediately if we're trying to check flows without provisioning them
Should Be Equal ${enableFlowProvisioning} true
Wait for all flows to in ADDED state ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
... ${workflow} ${total_onus} ${olt} true ${withEapol} ${withDhcp} ${withIgmp}
Wait for subscribers to have an IP
[Documentation] Check that all subscribers have received a DHCP_ACK
[Tags] non-critical dhcp plot-onos-dhcp
Wait for DHCP Ack ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus}
Disable and Delete devices
[Documentation] Disable and delete the OLTs in VOLTHA
[Tags] non-critical teardown
FOR ${olt_device_id} IN @{olt_device_ids}
Disable Device ${olt_device_id}
Delete Device ${olt_device_id}
END
Set Suite Variable ${olt_device_ids}
*** Keywords ***
Setup Suite
[Documentation] Setup test global variables and starts a timer
Set Suite Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG}
Set Suite Variable ${VOLTCTL_CONFIG} export VOLTCONFIG=%{VOLTCONFIG}
${total_onus}= Evaluate ${olt} * ${pon} * ${onu}
Set Suite Variable ${total_onus}
Configure Timer 10 minutes 0 seconds SuiteTimer
Start Timer SuiteTimer
Teardown Suite
[Documentation] Verify the timer
Stop Timer SuiteTimer
Verify Single Timer 10 minutes 0 seconds SuiteTimer