| # Copyright 2017 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Tests can be enabled by passing the following tags: |
| # - [setup] Creates and enable the OLT devices |
| # - [activation] Checks that ONUs are active in VOLTHA and ports discevered in ONOS |
| # - [flow-before] Checks that flows are pushed (before subscriber provisioning) |
| # - [authentication] Checks that subscribers are correctly authenticated |
| # - [provision] Provision the data-plane flows for all the subscribers |
| # - [flow-after] Checks that flows are pushed (after subscriber provisioning) |
| # - [dhcp] Checks that subscribers have received an IP |
| # |
| # To run the full test: |
| # robot Voltha_Scale_Tests.robot |
| # |
| # To run only ceratain tests: |
| # robot -i activation -i flow-before Voltha_Scale_Tests.robot |
| # |
| # To exclude only ceratain tests: |
| # robot -e -i flow-before Voltha_Scale_Tests.robot |
| # |
| # Once te test complete you can extrapolate the results by using |
| # python extract-times.py |
| |
| *** Settings *** |
| Documentation Collect measurements on VOLTHA performances |
| Suite Setup Setup Suite |
| #Test Setup Setup |
| #Test Teardown Teardown |
| Suite Teardown Teardown Suite |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library Timer |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/flows.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../variables/variables.robot |
| |
| *** Variables *** |
| ${ONOS_SSH_IP} 127.0.0.1 |
| ${ONOS_SSH_PORT} 8101 |
| |
| # Scale pipeline values |
| ${olt} 1 |
| ${pon} 1 |
| ${onu} 1 |
| |
| ${enableLLDP} false |
| ${enableFlowProvisioning} true |
| ${enableSubscriberProvisioning} true |
| |
| ${workflow} att |
| ${withEapol} false |
| ${withDhcp} false |
| ${withIgmp} false |
| |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| |
| *** Test Cases *** |
| |
| Create and Enable devices |
| [Documentation] Create and enable the OLTs in VOLTHA |
| [Tags] setup |
| ${olt_device_ids}= Create List |
| FOR ${INDEX} IN RANGE 0 ${olt} |
| ${olt_device_id}= Create Device bbsim${INDEX} 50060 openolt |
| Enable Device ${olt_device_id} |
| Append To List ${olt_device_ids} ${olt_device_id} |
| END |
| |
| Set Suite Variable ${olt_device_ids} |
| |
| Onu Activation in VOLTHA |
| [Documentation] Check that all ONUs reach the ACTIVE/ENABLED state in VOLTHA |
| [Tags] non-critical activation plot-voltha-onus |
| Wait For ONUs In VOLTHA ${total_onus} |
| |
| Port Discovery in ONOS |
| [Documentation] Check that all the UNI ports show up in ONOS |
| [Tags] non-critical activation plot-onos-ports |
| Wait for Ports in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus} BBSM |
| |
| Flows validation in VOLTHA before subscriber provisioning |
| [Documentation] Check that all the flows has been stored in the logical device |
| [Tags] non-critical flow-before plot-voltha-flows-before |
| # NOTE fail the test immediately if we're trying to check flows without provisioning them |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for Logical Devices flows ${workflow} ${total_onus} ${olt} false |
| ... ${withEapol} ${withDhcp} ${withIgmp} |
| |
| Flows validation in VOLTHA Adapters before subscriber provisioning |
| [Documentation] Check that all flows has been store in devices of type openolt |
| [Tags] non-critical flow-before plot-voltha-openolt-flows-before |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for OpenOLT Devices flows ${workflow} ${total_onus} ${olt} false |
| ... ${withEapol} ${withDhcp} ${withIgmp} |
| |
| Flows validation in ONOS before subscriber provisioning |
| [Documentation] Check that all the flows has been acknowledged |
| [Tags] non-critical flow-before plot-onos-flows-before |
| # NOTE fail the test immediately if we're trying to check flows without provisioning them |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for all flows to in ADDED state ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... ${workflow} ${total_onus} ${olt} false ${withEapol} ${withDhcp} ${withIgmp} |
| |
| Wait for subscribers to be Authenticated |
| [Documentation] Check that all subscribers have successfully authenticated |
| [Tags] non-critical authentication plot-onos-auth |
| Wait for AAA Authentication ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus} |
| |
| Provision subscribers |
| [Documentation] Provision data plane flows for all the subscribers |
| [Tags] non-critical provision |
| Should Be Equal ${enableSubscriberProvisioning} true |
| ${olts}= List OLTs ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| FOR ${olt} IN @{olts} |
| Provision all subscribers on device ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${olt} |
| END |
| |
| Flows validation in VOLTHA after subscriber provisioning |
| [Documentation] Check that all the flows has been stored in the logical device |
| [Tags] non-critical flow-after plot-voltha-flows-after |
| # NOTE fail the test immediately if we're trying to check flows without provisioning them |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for Logical Devices flows ${workflow} ${total_onus} ${olt} true |
| ... ${withEapol} ${withDhcp} ${withIgmp} |
| |
| Flows validation in VOLTHA Adapters after subscriber provisioning |
| [Documentation] Check that all flows has been store in devices of type openolt |
| [Tags] non-critical flow-after plot-voltha-openolt-flows-after |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for OpenOLT Devices flows ${workflow} ${total_onus} ${olt} true |
| ... ${withEapol} ${withDhcp} ${withIgmp} |
| |
| Flows validation in ONOS after subscriber provisioning |
| [Documentation] Check that all the flows has been acknowledged |
| [Tags] non-critical flow-after plot-onos-flows-after |
| # NOTE fail the test immediately if we're trying to check flows without provisioning them |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for all flows to in ADDED state ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... ${workflow} ${total_onus} ${olt} true ${withEapol} ${withDhcp} ${withIgmp} |
| |
| Wait for subscribers to have an IP |
| [Documentation] Check that all subscribers have received a DHCP_ACK |
| [Tags] non-critical dhcp plot-onos-dhcp |
| Wait for DHCP Ack ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus} |
| |
| Disable and Delete devices |
| [Documentation] Disable and delete the OLTs in VOLTHA |
| [Tags] non-critical teardown |
| FOR ${olt_device_id} IN @{olt_device_ids} |
| Disable Device ${olt_device_id} |
| Delete Device ${olt_device_id} |
| END |
| |
| Set Suite Variable ${olt_device_ids} |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Setup test global variables and starts a timer |
| Set Suite Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG} |
| Set Suite Variable ${VOLTCTL_CONFIG} export VOLTCONFIG=%{VOLTCONFIG} |
| |
| ${total_onus}= Evaluate ${olt} * ${pon} * ${onu} |
| Set Suite Variable ${total_onus} |
| |
| Configure Timer 10 minutes 0 seconds SuiteTimer |
| Start Timer SuiteTimer |
| |
| Teardown Suite |
| [Documentation] Verify the timer |
| Stop Timer SuiteTimer |
| Verify Single Timer 10 minutes 0 seconds SuiteTimer |