blob: 650c289f0c117f63375d3f9ce6d73cad82fdb984 [file] [log] [blame]
# Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# voltctl common functions
*** Settings ***
Documentation Library for various utilities
Library SSHLibrary
Library String
Library DateTime
Library Process
Library Collections
Library RequestsLibrary
Library OperatingSystem
Resource ./utils.robot
Resource ./flows.robot
*** Variables ***
${voltctlGrpcLimit} 32M
*** Keywords ***
Test Empty Device List
[Documentation] Verify that there are no devices in the system
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
Should Be Equal As Integers ${length} 0
Create Device
[Arguments] ${ip} ${port} ${type}=openolt
[Documentation] Creates a device in VOLTHA
#create/preprovision device
${rc} ${device_id}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device create -t ${type} -H ${ip}:${port}
Log ${device_id}
Should Be Equal As Integers ${rc} 0 Failed to Create Device beause of ${device_id}
[Return] ${device_id}
Enable Device
[Arguments] ${device_id}
[Documentation] Enables a device in VOLTHA
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device enable ${device_id}
Should Be Equal As Integers ${rc} 0 Failed to Enable Device beause of ${output}
Disable Device
[Arguments] ${device_id}
[Documentation] Disables a device in VOLTHA
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device disable ${device_id}
Should Be Equal As Integers ${rc} 0 Failed to Disable Device beause of ${output}
Delete Device
[Arguments] ${device_id}
[Documentation] Deletes a device in VOLTHA
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device delete ${device_id}
Should Be Equal As Integers ${rc} 0 Failed to Delete Device beause of ${output}
Reboot Device
[Arguments] ${device_id}
[Documentation] Reboot the OLT using voltctl command
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device reboot ${device_id}
Should Be Equal As Integers ${rc} 0 Failed to Reboot Device beause of ${output}
Disable Devices In Voltha
[Documentation] Disables all the known devices in voltha
[Arguments] ${filter}
${arg}= Set Variable ${EMPTY}
${arg}= Run Keyword If len('${filter}'.strip()) != 0 Set Variable --filter ${filter}
${rc} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} ${arg} --orderby Root -q | xargs echo -n
Should Be Equal As Integers ${rc} 0
${rc} ${output}= Run Keyword If len('${devices}') != 0 Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device disable ${devices}
Run Keyword If len('${devices}') != 0
... Should Be Equal As Integers ${rc} 0 Failed to Disable Devices beause of ${output}
Test Devices Disabled In Voltha
[Documentation] Tests to verify that all devices in VOLTHA are disabled
[Arguments] ${filter}
${rc} ${count}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} --filter '${filter},AdminState!=DISABLED' -q | wc -l
Should Be Equal As Integers ${rc} 0
Should Be Equal As Integers ${count} 0
Delete Devices In Voltha
[Documentation] Disables all the known devices in voltha
[Arguments] ${filter}
${arg}= Set Variable ${EMPTY}
${arg}= Run Keyword If len('${filter}'.strip()) != 0 Set Variable --filter ${filter}
${rc} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list ${arg} -m ${voltctlGrpcLimit} --orderby Root -q | xargs echo -n
Should Be Equal As Integers ${rc} 0
${rc} ${output}= Run Keyword If len('${devices}') != 0 Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device delete ${devices}
Run Keyword If len('${devices}') != 0 Should Be Equal As Integers ${rc} 0
Get Device Flows from Voltha
[Arguments] ${device_id}
[Documentation] Gets device flows from VOLTHA
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device flows ${device_id} -m ${voltctlGrpcLimit}
Should Be Equal As Integers ${rc} 0
[Return] ${output}
Get Logical Device Output from Voltha
[Arguments] ${device_id}
[Documentation] Gets logicaldevice flows and ports from VOLTHA
${rc1} ${flows}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice flows ${device_id}
${rc2} ${ports}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice port list ${device_id}
Log ${flows}
Log ${ports}
Should Be Equal As Integers ${rc1} 0
Should Be Equal As Integers ${rc2} 0
Get Device Output from Voltha
[Arguments] ${device_id}
[Documentation] Gets device flows and ports from VOLTHA
${rc1} ${flows}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device flows ${device_id} -m ${voltctlGrpcLimit}
${rc2} ${ports}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${device_id} -m ${voltctlGrpcLimit}
Log ${flows}
Log ${ports}
Should Be Equal As Integers ${rc1} 0
Should Be Equal As Integers ${rc2} 0
Get Device List from Voltha
[Documentation] Gets Device List Output from Voltha
${rc1} ${devices}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit}
Log ${devices}
Should Be Equal As Integers ${rc1} 0
Get ONUs Device IDs from Voltha
[Documentation] Fetches the ONU Device Ids from Voltha
${rc} ${onus}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} -f Type=brcm_openomci_onu -q
Should Be Equal as Integers ${rc} 0
@{onuDevList}= Split To Lines ${onus}
[Return] ${onuDevList}
Get Device List from Voltha by type
[Documentation] Gets Device List Output from Voltha applying filtering by device type
[Arguments] ${type}
${rc1} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} -f Type=${type} -o json
Log ${devices}
Should Be Equal As Integers ${rc1} 0
Return From Keyword ${devices}
Get Logical Device List from Voltha
[Documentation] Gets Logical Device List Output from Voltha (in json format)
${rc1} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice list -m ${voltctlGrpcLimit} -o json
Log ${devices}
Should Be Equal As Integers ${rc1} 0
Return From Keyword ${devices}
Validate Device
[Documentation]
... Parses the output of "voltctl device list" and inspects a device ${id}, specified as either
... the serial number or device ID. Arguments are matched for device states of: "admin_state",
... "oper_status", and "connect_status"
... Note: Set "by_dev_id" to True if Device Id is passed for validation
... otherwise look up will be based on Device Serial Number
[Arguments] ${admin_state} ${oper_status} ${connect_status}
... ${id} ${onu_reason}=${EMPTY} ${onu}=False ${by_dev_id}=False
${rc} ${output}= Run Keyword If ${by_dev_id} Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} -f Id=${id} -o json
... ELSE Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} -f SerialNumber=${id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${output}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${jsonCamelCaseFieldnames}= Run Keyword And Return Status
... Dictionary Should Contain Key ${value} adminState
${astate}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} adminState
... ELSE
... Get From Dictionary ${value} adminstate
${opstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} operStatus
... ELSE
... Get From Dictionary ${value} operstatus
${cstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} connectStatus
... ELSE
... Get From Dictionary ${value} connectstatus
${sn}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} serialNumber
... ELSE
... Get From Dictionary ${value} serialnumber
${devId}= Get From Dictionary ${value} id
${mib_state}= Get From Dictionary ${value} reason
${matched}= Set Variable If '${sn}' == '${id}' or '${devId}' == '${id}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No match found for ${id} to validate device
Log ${value}
Should Be Equal '${astate}' '${admin_state}' Device ${sn} admin_state != ${admin_state}
... values=False
Should Be Equal '${opstatus}' '${oper_status}' Device ${sn} oper_status != ${oper_status}
... values=False
Should Be Equal '${cstatus}' '${connect_status}' Device ${sn} conn_status != ${connect_status}
... values=False
Run Keyword If '${onu}' == 'True' Should Contain '${onu_reason}' '${mib_state}'
... Device ${sn} mib_state incorrect (${mib_state}) values=False
Validate OLT Device
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${id} ${by_dev_id}=False
[Documentation] Parses the output of "voltctl device list" and inspects device ${id}, specified
... as either its serial numbner or device ID. Match on OLT Serial number or Device Id and inspect states
... Note: Set "by_dev_id" to True if Device Id is passed for validation
... otherwise look up will be based on Device Serial Number
Validate Device ${admin_state} ${oper_status} ${connect_status} ${id} by_dev_id=${by_dev_id}
Validate OLT Devices
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${ids}=${EMPTY}
[Documentation] Parses the output of "voltctl device list" and inspects device ${id}, specified
... as either its serial numbner or device ID. Match on OLT Serial number or Device Id and inspect states
FOR ${I} IN RANGE 0 ${olt_count}
${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
Validate Device ${admin_state} ${oper_status} ${connect_status} ${olt_device_id} by_dev_id=True
END
Validate ONU Devices
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${List_ONU_Serial}
... ${onu_reason}=omci-flows-pushed
[Documentation] Parses the output of "voltctl device list" and inspects device ${List_ONU_Serial}
... Iteratively match on each Serial number contained in ${List_ONU_Serial} and inspect
... states including MIB state
FOR ${serial_number} IN @{List_ONU_Serial}
Validate Device ${admin_state} ${oper_status} ${connect_status} ${serial_number}
... onu_reason=${onu_reason} onu=True
END
Validate Device Port Types
[Documentation]
... Parses the output of voltctl device port list <device_id> and matches the port types listed
[Arguments] ${device_id} ${pon_type} ${ethernet_type} ${all_active}=True
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${device_id} -m ${voltctlGrpcLimit} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${jsonCamelCaseFieldnames}= Run Keyword And Return Status
... Dictionary Should Contain Key ${value} adminState
${astate}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} adminState
... ELSE
... Get From Dictionary ${value} adminstate
${opstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} operStatus
... ELSE
... Get From Dictionary ${value} operstatus
${type}= Get From Dictionary ${value} type
Should Be Equal '${astate}' 'ENABLED' Device ${device_id} port admin_state != ENABLED values=False
Run Keyword If ${all_active} Should Be Equal '${opstatus}' 'ACTIVE'
... Device ${device_id} port oper_status != ACTIVE values=False
Should Be True '${type}' == '${pon_type}' or '${type}' == '${ethernet_type}'
... Device ${device_id} port type is neither ${pon_type} or ${ethernet_type}
END
Validate OLT Port Types
[Documentation] Parses the output of voltctl device port list ${olt_device_id} and matches the port types listed
[Arguments] ${pon_type} ${ethernet_type}
Validate Device Port Types ${olt_device_id} ${pon_type} ${ethernet_type}
Validate ONU Port Types
[Arguments] ${List_ONU_Serial} ${pon_type} ${ethernet_type}
[Documentation] Parses the output of voltctl device port list for each ONU SN listed in ${List_ONU_Serial}
... and matches the port types listed
FOR ${serial_number} IN @{List_ONU_Serial}
${onu_dev_id}= Get Device ID From SN ${serial_number}
# Only first UNI port is ACTIVE; the rest are in DISCOVERED operstatus
Validate Device Port Types ${onu_dev_id} ${pon_type} ${ethernet_type} all_active=False
END
Validate Device Flows
[Arguments] ${device_id} ${flow_count}=${EMPTY}
[Documentation] Parses the output of voltctl device flows <device_id> and expects flow count > 0
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device flows ${device_id} -m ${voltctlGrpcLimit} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
Log 'Number of flows = ' ${length}
Run Keyword If '${flow_count}' == '${EMPTY}' Should Be True ${length} > 0
... Number of flows for ${device_id} was 0
... ELSE Should Be True ${length} == ${flow_count}
... Number of flows for ${device_id} was not ${flow_count}
Validate OLT Flows
[Arguments] ${flow_count}=${EMPTY} ${olt_device_id}=${EMPTY}
[Documentation] Parses the output of voltctl device flows ${olt_device_id}
... and expects flow count == ${flow_count}
Validate Device Flows ${olt_device_id} ${flow_count}
Validate ONU Flows
[Arguments] ${List_ONU_Serial} ${flow_count}=${EMPTY}
[Documentation] Parses the output of voltctl device flows for each ONU SN listed in ${List_ONU_Serial}
... and expects flow count == ${flow_count}
FOR ${serial_number} IN @{List_ONU_Serial}
${onu_dev_id}= Get Device ID From SN ${serial_number}
Validate Device Flows ${onu_dev_id} ${flow_count}
END
Validate ONU Devices With Duration
[Documentation]
... Parses the output of "voltctl device list" and inspects all devices ${List_ONU_Serial},
... Iteratively match on each Serial number contained in ${List_ONU_Serial} and inspect
... states including MIB state.
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${onu_reason}
... ${List_ONU_Serial} ${startTime} ${print2console}=False ${output_file}=${EMPTY}
... ${alternate_reason}=${EMPTY}
${cmd}= Catenate voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} -f Type=brcm_openomci_onu
... --format "{{.SerialNumber}}\t{{.AdminState}}\t{{.OperStatus}}\t{{.ConnectStatus}}\t{{.Reason}}" | grep -v SERIALNUMBER
${rc} ${output}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0 Failed Validate ONU Devices because of ${output}
Log ${output}
${timeCurrent} = Get Current Date
${timeTotalMs} = Subtract Date From Date ${timeCurrent} ${startTime} result_format=number
@{Results}= Split String ${output} \n
FOR ${Line} IN @{Results}
${matched}= Set Variable False
@{words}= Split String ${Line} \t
${sn}= Set Variable ${words[0]}
${astate}= Set Variable ${words[1]}
${opstatus}= Set Variable ${words[2]}
${cstatus}= Set Variable ${words[3]}
${mib_state}= Set Variable ${words[4]}
${onu_id}= Get Index From List ${List_ONU_Serial} ${sn}
${matched}= Set Variable If -1 != ${onu_id} True False
${matched}= Set Variable If '${astate}' == '${admin_state}' ${matched} False
${matched}= Set Variable If '${opstatus}' == '${oper_status}' ${matched} False
${matched}= Set Variable If '${cstatus}' == '${connect_status}' ${matched} False
${len}= Get Length ${alternate_reason}
${matches}= Run Keyword If ${len} >= 1 Get Match Count ${alternate_reason} ${mib_state}
... ELSE Set Variable 0
${matched}= Set Variable If '${mib_state}' == '${onu_reason}' or ${matches} >= 1
... ${matched} False
Run Keyword If ${matched} and ${print2console} Log
... \r\nONU ${sn} reached the state ${onu_reason} after ${timeTotalMs} sec. console=yes
Run Keyword If ${matched} and ('${output_file}'!='${EMPTY}') Append To File ${output_file}
... \r\nONU ${sn} reached the state ${onu_reason} after ${timeTotalMs} sec.
Run Keyword If ${matched} Remove Values From List ${List_ONU_Serial} ${sn}
END
Should Be Empty ${List_ONU_Serial} List ${List_ONU_Serial} not empty
Validate ONU Devices MIB State With Duration
[Documentation]
... Parses the output of "voltctl device list" and inspects all devices ${List_ONU_Serial},
... Iteratively match on each Serial number contained in ${List_ONU_Serial} and inspect MIB state.
[Arguments] ${onu_reason}
... ${List_ONU_Serial} ${startTime} ${print2console}=False ${output_file}=${EMPTY}
${type} = Set Variable brcm_openomci_onu
${voltctl_commad} = Catenate SEPARATOR=
... voltctl device list -m ${voltctlGrpcLimit} -f Type=${type} -f Reason=${onu_reason} --format '{{.SerialNumber}}'
${rc} ${output}= Run and Return Rc and Output ${voltctl_commad}
Should Be Equal As Integers ${rc} 0
${timeCurrent} = Get Current Date
${timeTotalMs} = Subtract Date From Date ${timeCurrent} ${startTime} result_format=number
@{outputdata} = Split String ${output}
${outputlength} = Get Length ${outputdata}
${onulength} = Get Length ${List_ONU_Serial}
${Matches} = Run Keyword If ${outputlength}<=${onulength}
... Compare Lists ${outputdata} ${List_ONU_Serial}
... ELSE Compare Lists ${List_ONU_Serial} ${outputdata}
${length} = Get Length ${Matches}
FOR ${INDEX} IN RANGE 0 ${length}
${sn}= Get From List ${Matches} ${INDEX}
Run Keyword If ${print2console} Log
... \r\nONU ${sn} reached the state ${onu_reason} after ${timeTotalMs} sec. console=yes
Run Keyword If ('${output_file}'!='${EMPTY}') Append To File ${output_file}
... \r\nONU ${sn} reached the state ${onu_reason} after ${timeTotalMs} sec.
Remove Values From List ${List_ONU_Serial} ${sn}
END
Should Be Empty ${List_ONU_Serial} List ${List_ONU_Serial} not empty
Validate ONU Device By Device Id
[Documentation]
... Parses the output of "voltctl device list" filtered by device id and inspects states including reason.
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${onu_reason} ${onu_id}
${cmd} Catenate voltctl -c ${VOLTCTL_CONFIG} device list --filter=Id=${onu_id} -m ${voltctlGrpcLimit} -o json
${rc} ${output}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
${length}= Get Length ${jsondata}
Should Be Equal As Integers ${length} 1 No match found for ${onu_id} to validate device
${value}= Get From List ${jsondata} 0
Log ${value}
${jsonCamelCaseFieldnames}= Run Keyword And Return Status
... Dictionary Should Contain Key ${value} adminState
${astate}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} adminState
... ELSE
... Get From Dictionary ${value} adminstate
${opstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} operStatus
... ELSE
... Get From Dictionary ${value} operstatus
${cstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} connectStatus
... ELSE
... Get From Dictionary ${value} connectstatus
${sn}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} serialNumber
... ELSE
... Get From Dictionary ${value} serialnumber
${devId}= Get From Dictionary ${value} id
${mib_state}= Get From Dictionary ${value} reason
Should Be Equal '${devId}' '${onu_id}' No match found for ${onu_id} to validate device
... values=False
Should Be Equal '${astate}' '${admin_state}' Device ${sn} admin_state != ${admin_state}
... values=False
Should Be Equal '${opstatus}' '${oper_status}' Device ${sn} oper_status != ${oper_status}
... values=False
Should Be Equal '${cstatus}' '${connect_status}' Device ${sn} conn_status != ${connect_status}
... values=False
Should Be Equal '${mib_state}' '${onu_reason}'
... Device ${sn} mib_state incorrect (${mib_state}) values=False
Check all ONU OperStatus
[Documentation] Checks that all ONUs OperStatus is the required one.
[Arguments] ${List_ONU_Serial} ${oper_status}
${cmd}= Catenate voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} -f Type=brcm_openomci_onu
... --format "{{.SerialNumber}}\t{{.AdminState}}\t{{.OperStatus}}\t{{.ConnectStatus}}\t{{.Reason}}"
... | grep -v SERIALNUMBER | grep ${oper_status}
${rc} ${output}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0
@{Results}= Split String ${output} \n
FOR ${Line} IN @{Results}
@{words}= Split String ${Line} \t
${sn}= Set Variable ${words[0]}
Remove Values From List ${List_ONU_Serial} ${sn}
END
Should Be Empty ${List_ONU_Serial} For ONUs ${List_ONU_Serial} OperStatus ${oper_status} not matched!
Validate Last ONU Communication
[Documentation] Validates last communication with ONU.
[Arguments] ${validation_duration}=5s
${cmd}= Catenate voltctl -c ${VOLTCTL_CONFIG} adapter list -f Type=brcm_openomci_onu
... --format '{{gosince .LastCommunication}}'
${rc} ${output}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0
${lastcomm}= Convert Time ${output}
${validduration}= Convert Time ${validation_duration}
Should Be True ${lastcomm}<=${validduration}
Get Onu Image List
[Documentation] Delivers the ONU device image list
[Arguments] ${dev_id}
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device onuimage list ${dev_id}
[return] ${rc} ${output}
Compare Lists
[Documentation]
... Compares both lists and put all matches in the returned list
[Arguments] ${ListIterate} ${ListCompare}
@{list} = Create List
${length} = Get Length ${ListIterate}
FOR ${INDEX} IN RANGE 0 ${length}
${sn}= Get From List ${ListIterate} ${INDEX}
${onu_id}= Get Index From List ${ListCompare} ${sn}
Run Keyword If -1 != ${onu_id} Append To List ${list} ${sn}
END
[Return] ${list}
Validate Logical Device
[Documentation] Validate Logical Device is listed
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} logicaldevice list -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${devid}= Get From Dictionary ${value} id
${rootdev}= Get From Dictionary ${value} rootDeviceId
${desc}= Get From Dictionary ${value} desc
${sn}= Get From Dictionary ${desc} serialNum
Exit For Loop
END
Should Be Equal '${rootdev}' '${olt_device_id}' Root Device does not match ${olt_device_id} values=False
Should Be Equal '${sn}' '${BBSIM_OLT_SN}' Logical Device ${sn} does not match ${BBSIM_OLT_SN}
... values=False
[Return] ${devid}
Validate Logical Device Ports
[Arguments] ${logical_device_id}
[Documentation] Validate Logical Device Ports are listed and are > 0
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice port list ${logical_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
Should Be True ${length} > 0 Number of ports for ${logical_device_id} was 0
Validate Logical Device Flows
[Arguments] ${logical_device_id}
[Documentation] Validate Logical Device Flows are listed and are > 0
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice flows ${logical_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
Should Be True ${length} > 0 Number of flows for ${logical_device_id} was 0
Retrieve ONU UNI Ports
[Arguments] ${onu_device_id}
[Documentation] Retrieves the list of Active and Enabled UNI ports from the ONU device
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${onu_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${onu_uni_list}= Create List
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${portno}= Get From Dictionary ${value} portNo
${adminstate}= Get From Dictionary ${value} adminState
${operstate}= Get From Dictionary ${value} operStatus
Run Keyword If '${type}'=='ETHERNET_UNI' and '${adminstate}'=='ENABLED' and '${operstate}'=='ACTIVE'
... Append To List ${onu_uni_list} ${portno}
END
[Return] ${onu_uni_list}
Retrieve OLT PON Ports
[Arguments] ${olt_device_id}
[Documentation] Retrieves the list of PON ports from the OLT device
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${olt_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${olt_pon_list}= Create List
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${portno}= Get From Dictionary ${value} portNo
${peers}= Get From Dictionary ${value} peers
${len_peers}= Get Length ${peers}
Run Keyword If '${type}' == 'PON_OLT' and ${len_peers} > 0
... Append To List ${olt_pon_list} ${portno}
END
[Return] ${olt_pon_list}
Retrieve Peer List From OLT PON Port
[Arguments] ${olt_device_id} ${pon_port} ${expected_num_peers}=0
[Documentation] Retrieves the list of peer device ids list from the OLT PON port
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${olt_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${portno}= Get From Dictionary ${value} portNo
${peers}= Get From Dictionary ${value} peers
${matched}= Set Variable If '${type}' == 'PON_OLT' and '${portno}' == '${pon_port}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No PON port found for OLT ${olt_device_id}
${length}= Get Length ${peers}
Run Keyword If ${expected_num_peers}>0 Should Be Equal As Integers ${length} ${expected_num_peers}
... Number of found peers does not match expected number ${length}:${expected_num_peers}
${olt_peer_list}= Create List
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${peers} ${INDEX}
${peer_id}= Get From Dictionary ${value} deviceId
Append To List ${olt_peer_list} ${peer_id}
END
[Return] ${olt_peer_list}
Validate OLT PON Port Status
[Arguments] ${olt_device_id} ${pon_port} ${admin_state} ${oper_status}
[Documentation] Verifies the state of the PON port of the OLT
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${olt_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${portno}= Get From Dictionary ${value} portNo
${astate}= Get From Dictionary ${value} adminState
${opstatus}= Get From Dictionary ${value} operStatus
${matched}= Set Variable If '${type}' == 'PON_OLT' and '${portno}' == '${pon_port}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No PON port found for OLT ${olt_device_id} ${pon_port}
Log ${value}
Should Be Equal '${astate}' '${admin_state}' OLT PON Port admin_state != ${admin_state}
... values=False
Should Be Equal '${opstatus}' '${oper_status}' OLT PON Port oper_status != ${oper_status}
... values=False
DisableOrEnable OLT PON Port
[Arguments] ${operation} ${olt_device_id} ${portno}
[Documentation] Disables or Enables the PON port of the OLT
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port ${operation} ${olt_device_id} ${portno}
Should Be Equal As Integers ${rc} 0
Retrieve Peer List From OLT
[Arguments] ${olt_peer_list}
[Documentation] Retrieve the list of peer device id list from port list
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${olt_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${peers}= Get From Dictionary ${value} peers
${matched}= Set Variable If '${type}' == 'PON_OLT' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No PON port found for OLT ${olt_device_id}
${length}= Get Length ${peers}
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${peers} ${INDEX}
${peer_id}= Get From Dictionary ${value} deviceId
Append To List ${olt_peer_list} ${peer_id}
END
Validate OLT Peer Id List
[Arguments] ${olt_peer_id_list}
[Documentation] Match each entry in the ${olt_peer_id_list} against ONU device ids.
FOR ${peer_id} IN @{olt_peer_id_list}
Match OLT Peer Id ${peer_id}
END
Match OLT Peer Id
[Arguments] ${olt_peer_id}
[Documentation] Lookup the OLT Peer Id in against the list of ONU device Ids
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${devid}= Get From Dictionary ${value} id
${matched}= Set Variable If '${devid}' == '${olt_peer_id}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} Peer id ${olt_peer_id} does not match any ONU device id
Validate ONU Peer Id
[Arguments] ${olt_device_id} ${List_ONU_Serial}
[Documentation] Match each ONU peer to that of the OLT device id
FOR ${onu_serial} IN @{List_ONU_Serial}
${onu_dev_id}= Get Device ID From SN ${onu_serial}
Match ONU Peer Id ${onu_dev_id}
END
Match ONU Peer Id
[Arguments] ${onu_dev_id}
[Documentation] Match an ONU peer to that of the OLT device id
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${onu_dev_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${peers}= Get From Dictionary ${value} peers
${matched}= Set Variable If '${type}' == 'PON_ONU' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No PON port found for ONU ${onu_dev_id}
${length}= Get Length ${peers}
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${peers} ${INDEX}
${peer_id}= Get From Dictionary ${value} deviceId
END
Should Be Equal '${peer_id}' '${olt_device_id}'
... Mismatch between ONU peer ${peer_id} and OLT device id ${olt_device_id} values=False
Get Device ID From SN
[Arguments] ${serial_number}
[Documentation] Gets the device id by matching for ${serial_number}
${rc} ${id}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list --filter=SerialNumber=${serial_number} --format='{{.Id}}'
Should Be Equal As Integers ${rc} 0 "Error while fetching device list from VOLTHA"
Log ${id}
[Return] ${id}
Get Logical Device ID From SN
[Arguments] ${serial_number}
[Documentation] Gets the device id by matching for ${serial_number}
${rc} ${id}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice list --filter=Desc.SerialNum=${serial_number} --format='{{.Id}}'
Should Be Equal As Integers ${rc} 0
Log ${id}
[Return] ${id}
Build ONU SN List
[Arguments] ${serial_numbers} ${olt_serial_number}=${EMPTY} ${num_onus}=${num_all_onus}
[Documentation] Appends all ONU SNs for the given OLT to the ${serial_numbers} list
FOR ${INDEX} IN RANGE 0 ${num_onus}
${onu_sn}= Set Variable ${hosts.src[${INDEX}]['onu']}
# skip if we have already append this ONU
${onu_id}= Get Index From List ${serial_numbers} ${onu_sn}
Continue For Loop If -1 != ${onu_id}
Run Keyword IF "${olt_serial_number}"=="${hosts.src[${INDEX}].olt}" or "${olt_serial_number}"=="${EMPTY}"
... Append To List ${serial_numbers} ${onu_sn}
END
Build ONU Device Id List
[Arguments] ${device_ids} ${olt_serial_number}=${EMPTY} ${num_onus}=${num_all_onus}
[Documentation] Appends all ONU Device IDs for the given OLT to the ${serial_numbers} list
FOR ${INDEX} IN RANGE 0 ${num_onus}
${onu_device_id}= Get Device ID From SN ${hosts.src[${INDEX}]['onu']}
# skip if we have already append this ONU
${onu_id}= Get Index From List ${device_ids} ${onu_device_id}
Continue For Loop If -1 != ${onu_id}
Run Keyword IF "${olt_serial_number}"=="${hosts.src[${INDEX}].olt}" or "${olt_serial_number}"=="${EMPTY}"
... Append To List ${device_ids} ${onu_device_id}
END
Get SN From Device ID
[Arguments] ${device_id}
[Documentation] Gets the device id by matching for ${device_id}
${rc} ${sn}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list --filter=Id=${device_id} --format='{{.SerialNumber}}'
Should Be Equal As Integers ${rc} 0
Log ${sn}
[Return] ${sn}
Get Parent ID From Device ID
[Arguments] ${device_id}
[Documentation] Gets the device id by matching for ${device_id}
${rc} ${pid}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list --filter=Id=${device_id} --format='{{.ParentId}}'
Should Be Equal As Integers ${rc} 0
Log ${pid}
[Return] ${pid}
Validate Device Removed
[Arguments] ${serialNumber}
[Documentation] Verifys that device, ${serial_number}, has been removed
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
@{sns}= Create List
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${device_sn}= Get From Dictionary ${value} serialNumber
Append To List ${sns} ${device_sn}
END
List Should Not Contain Value ${sns} ${serialNumber}
Validate all ONUS for OLT Removed
[Arguments] ${num_all_onus} ${hosts} ${olt_serial_number} ${timeout}
[Documentation] Verifys that all the ONUS for OLT ${serial_number}, has been removed
@{onu_list}= Create List
FOR ${J} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${J}]}
Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
${sn}= Set Variable ${src['onu']}
${onu_id}= Get Index From List ${onu_list} ${sn}
Continue For Loop If -1 != ${onu_id}
Append To List ${onu_list} ${sn}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed ${sn}
END
Reboot ONU
[Arguments] ${onu_id} ${validate_device}=True
[Documentation] Using voltctl command reboot ONU and verify that ONU comes up to running state
${rc} ${devices}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device reboot ${onu_id}
Should Be Equal As Integers ${rc} 0
Run Keyword If ${validate_device} Run Keyword And Continue On Failure Wait Until Keyword Succeeds
... 60s 1s Validate ONU Device By Device Id ENABLED DISCOVERED REACHABLE rebooting ${onu_id}
Assert ONUs in Voltha
[Arguments] ${count}
[Documentation] Check that a certain number of devices reached the ACTIVE/ENABLE state
${rc1} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} -m ${voltctlGrpcLimit} device list | grep -v OLT | grep ACTIVE | wc -l
Should Be Equal As Integers ${rc1} 0
Should Be Equal As Integers ${devices} ${count}
Wait for ONUs in VOLTHA
[Arguments] ${count} ${timeout}=10m
[Documentation] Waits until a certain number of devices reached the ACTIVE/ENABLE state
Wait Until Keyword Succeeds ${timeout} 5s Assert ONUs In Voltha ${count}
Validate ONU Model
[Documentation]
... Parses the output of "voltctl device list" and inspects onu model and optionally Vendor and Vendor-id
... Iteratively match on each Serial number contained in ${List_ONU_Serial} and inspect passed values
[Arguments] ${List_ONU_Serial} ${onu_model} ${onu_vendor}=${EMPTY} ${onu_vendor_id}=${EMPTY}
${cmd}= Catenate voltctl -c ${VOLTCTL_CONFIG} device list -m ${voltctlGrpcLimit} -f Type=brcm_openomci_onu
... --format "{{.Id}}\t{{.SerialNumber}}\t{{.Vendor}}\t{{.VendorId}}\t{{.Model}}" | grep -v SERIALNUMBER
${rc} ${output}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0 Failed Validate ONU model because of ${output}
Log ${output}
@{Results}= Split String ${output} \n
FOR ${Line} IN @{Results}
${matched}= Set Variable False
@{words}= Split String ${Line} \t
${id}= Set Variable ${words[0]}
${sn}= Set Variable ${words[1]}
${vendor}= Set Variable ${words[2]}
${vendor_id}= Set Variable ${words[3]}
${model}= Set Variable ${words[4]}
${onu_id}= Get Index From List ${List_ONU_Serial} ${sn}
${matched}= Set Variable If -1 != ${onu_id} True False
${matched}= Set Variable If '${model}'=='${onu_model}' ${matched} False
${matched}= Set Variable If '${onu_vendor}'=='${EMPTY}' or '${vendor}'=='${onu_vendor}' ${matched} False
${matched}= Set Variable If '${onu_vendor_id}'=='${EMPTY}' or '${vendor_id}'=='${onu_vendor_id}' ${matched} False
Run Keyword If ${matched} Remove Values From List ${List_ONU_Serial} ${sn}
END
Should Be Empty ${List_ONU_Serial} No valid ONU model found for ${List_ONU_Serial}!
Count Logical Devices flows
[Documentation] Count the flows across logical devices in VOLTHA
[Arguments] ${targetFlows}
${output}= Get Logical Device List From Voltha
${logical_devices}= To Json ${output}
${total_flows}= Set Variable 0
FOR ${device} IN @{logical_devices}
${rc} ${flows}= Run and Return Rc and Output
... voltctl -m ${voltctlGrpcLimit} -c ${VOLTCTL_CONFIG} logicaldevice flows ${device['id']} | grep -v ID | wc -l
Should Be Equal As Integers ${rc} 0
${total_flows}= Evaluate ${total_flows} + ${flows}
END
${msg}= Format String Found {total_flows} flows of {targetFlows} expected
... total_flows=${total_flows} targetFlows=${targetFlows}
Log ${msg}
Should Be Equal As Integers ${targetFlows} ${total_flows}
Wait for Logical Devices flows
[Documentation] Waits until the flows have been provisioned in the logical device
[Arguments] ${workflow} ${uni_count} ${olt_count} ${provisioned}
... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp} ${timeout}=10m
${targetFlows}= Calculate flows by workflow ${workflow} ${uni_count} ${olt_count} ${provisioned}
... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp}
Log ${targetFlows}
# TODO extend Validate Logical Device Flows to check the correct number of flows
Wait Until Keyword Succeeds ${timeout} 5s Count Logical Devices flows ${targetFlows}
Count OpenOLT Device Flows
[Documentation] Count the flows across openolt devices in VOLTHA
[Arguments] ${targetFlows}
${output}= Get Device List from Voltha by type openolt
${devices}= To Json ${output}
${total_flows}= Set Variable 0
FOR ${device} IN @{devices}
${rc} ${flows}= Run and Return Rc and Output
... voltctl -m ${voltctlGrpcLimit} -c ${VOLTCTL_CONFIG} device flows ${device['id']} | grep -v ID | wc -l
Should Be Equal As Integers ${rc} 0
${total_flows}= Evaluate ${total_flows} + ${flows}
END
${msg}= Format String Found {total_flows} flows of {targetFlows} expected
... total_flows=${total_flows} targetFlows=${targetFlows}
Log ${msg}
Should Be Equal As Integers ${targetFlows} ${total_flows}
Wait for OpenOLT Devices flows
[Documentation] Waits until the flows have been provisioned in the openolt devices
[Arguments] ${workflow} ${uni_count} ${olt_count} ${provisioned}
... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp}
${beforeFlows}= Calculate flows by workflow ${workflow} ${uni_count} ${olt_count} ${provisioned}
... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp}
# In the physical device we only have 2 data plane flows (on the PON) instead of 4
${afterFlows}= Evaluate ${beforeFlows} - (${uni_count} * 2)
# In the TT workflow we have multiple service,
# so we need to remove 6 flows per each UNI that are only on the ONU device
${ttFlows}= Evaluate ${beforeFlows} - (${uni_count} * 6)
${afterFlows}= Set Variable If $workflow=='tt' ${ttFlows} ${afterFlows}
${targetFlows}= Set Variable If $provisioned=='true' ${afterFlows} ${beforeFlows}
Log ${targetFlows}
Wait Until Keyword Succeeds 10m 5s Count OpenOLT Device Flows ${targetFlows}
Validate ONU Device Image
[Documentation] Validates the ONU device image
[Arguments] ${data} ${image_version} ${dev_id} ${download_state} ${expected_reason} ${image_status}
${jsondata}= To Json ${data}
${length}= Get Length ${jsondata}
Should Not Be Equal As Integers ${length} 0 No record to validate device image
FOR ${J} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${J}
Log ${value}
${deviceId}= Get From Dictionary ${value} deviceId
Should Contain ${dev_id} ${deviceId} No match found for ${deviceId} to validate device image!
${imageState}= Get From Dictionary ${value} imageState
${version}= Get From Dictionary ${imageState} version
${dwlState}= Get From Dictionary ${imageState} downloadState
${reason}= Get From Dictionary ${imageState} reason
${imgStatus}= Get From Dictionary ${imageState} imageState
Should Be Equal '${version}' '${image_version}' Device ${deviceId}: '${version}' != '${image_version}'
... values=False
Should Be Equal '${dwlState}' '${download_state}' Device ${deviceId}: '${dwlState}' != '${download_state}'
... values=False
Should Be Equal '${reason}' '${expected_reason}' Device ${deviceId}: '${reason}' != '${expected_reason}'
... values=False
Should Be Equal '${imgStatus}' '${image_status}' Device ${deviceId}: '${imgStatus}' != '${image_status}'
... values=False
END
Download ONU Device Image
[Documentation] Downloads the given ONU software image
[Arguments] ${ver} ${url} ${vendor} ${active} ${commit} ${crc} ${id}
... ${download_state}=DOWNLOAD_STARTED ${expected_reason}=NO_ERROR ${image_state}=IMAGE_UNKNOWN
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device onuimage download ${ver} ${url} ${vendor} ${active} ${commit} ${crc} ${id} -o json
Log ${output}
Should Be Equal As Integers ${rc} 0
Validate ONU Device Image ${output} ${ver} ${id} ${download_state} ${expected_reason} ${image_state}
Activate ONU Device Image
[Documentation] Activates the given ONU software image
[Arguments] ${ver} ${commit} ${id}
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device onuimage activate ${ver} ${commit} ${id} -o json
Log ${output}
Should Be Equal As Integers ${rc} 0
Validate ONU Device Image ${output} ${ver} ${id} DOWNLOAD_SUCCEEDED NO_ERROR IMAGE_ACTIVATING
Commit ONU Device Image
[Documentation] Commits the given ONU software image
[Arguments] ${ver} ${id}
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device onuimage commit ${ver} ${id} -o json
Log ${output}
Should Be Equal As Integers ${rc} 0
Validate ONU Device Image ${output} ${ver} ${id} DOWNLOAD_SUCCEEDED NO_ERROR IMAGE_COMMITTING
Abort ONU Device Image
[Documentation] Aborts the given ONU software image
[Arguments] ${ver} ${id} ${download_state} ${expected_reason} ${image_state}
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device onuimage abort ${ver} ${id} -o json
Log ${output}
Should Be Equal As Integers ${rc} 0
Validate ONU Device Image ${output} ${ver} ${id} ${download_state} ${expected_reason} ${image_state}
Remove Adapter Image
[Documentation] Aborts the upgrade processing for a given ONU software image and thus removes the image from adapter
[Arguments] ${ver} ${id}
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device onuimage abort ${ver} ${id} -o json
Log ${output}
Remove Adapter Image from ONUs
[Documentation] Aborts the upgrade processing for a given ONU software image and thus removes the image from adapter
... for the passed ONUs
[Arguments] ${ver} ${onu_id_list}
FOR ${onu_device_id} IN @{onu_id_list}
Remove Adapter Image ${ver} ${onu_device_id}
END
Verify ONU Device Image Status
[Documentation] Verfies the ONU device image state
[Arguments] ${image_version} ${dev_id} ${download_state} ${expected_reason} ${image_state}
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device onuimage status ${image_version} ${dev_id} -o json
Log ${output}
Should Be Equal As Integers ${rc} 0
Validate ONU Device Image ${output} ${image_version} ${dev_id} ${download_state} ${expected_reason}
... ${image_state}
Assert ONUs Image Status in Voltha
[Arguments] ${onu_count} ${image_version} ${download_state} ${expected_reason} ${image_state}
[Documentation] Check that a certain number of devices reached the given image status
${cmd}= Catenate voltctl -c ${VOLTCTL_CONFIG} -m ${voltctlGrpcLimit} device onuimage status ${image_version}
... | grep ${download_state} | grep ${expected_reason} | grep ${image_state} | wc -l
${rc} ${count}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0
Should Be Equal As Integers ${count} ${onu_count}
Wait for ONUs Image Status in VOLTHA
[Arguments] ${onu_count} ${image_version} ${download_state} ${expected_reason} ${image_state}
... ${timeout}=10m
[Documentation] Waits until a certain number of devices reached the given image status
Wait Until Keyword Succeeds ${timeout} 5s Assert ONUs Image Status in Voltha ${onu_count}
... ${image_version} ${download_state} ${expected_reason} ${image_state}
Verify ONU Device Image List
[Documentation] Verfies the ONU device image list
[Arguments] ${dev_id} ${image_version} ${committed} ${activated} ${valid} ${image_should_not_in_list}=False
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device onuimage list ${dev_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${version}= Get From Dictionary ${value} version
${isCommited}= Get From Dictionary ${value} isCommited
${isActive}= Get From Dictionary ${value} isActive
${isValid}= Get From Dictionary ${value} isValid
${matched}= Set Variable If '${version}' == '${image_version}' True False
Exit For Loop If ${matched}
END
Run Keyword If ${image_should_not_in_list}
... Should Not Be True ${matched} ONU Image found unexpectedly with Version ${image_version}
... ELSE Should Be True ${matched} No ONU Image found with Version ${image_version}
Run Keyword If ${matched} Should Be Equal '${isCommited}' '${committed}'
... Device ${dev_id}: '${isCommited}' != '${committed}' values=False
Run Keyword If ${matched} Should Be Equal '${isActive}' '${activated}'
... Device ${dev_id}: '${isActive}' != '${activated}' values=False
Run Keyword If ${matched} Should Be Equal '${isValid}' '${valid}'
... Device ${dev_id}: '${isValid}' != '${valid}' values=False
# pm-data relevant keywords
Read Default Interval From Pmconfig
[Documentation] Reads default interval from pm config
[Arguments] ${device_id}
${rc} ${result}= Run and Return Rc and Output voltctl device pmconfig get ${device_id}
Should Be Equal As Integers ${rc} 0
log ${result}
@{words}= Split String ${result}
${interval}= Get From List ${words} 3
log ${interval}
[return] ${interval}
Read Group Interval From Pmconfig
[Documentation] Reads default interval from pm config
[Arguments] ${device_id} ${group}
${rc} ${result}= Run and Return Rc and Output voltctl device pmconfig group list ${device_id} | grep ${group}
Should Be Equal As Integers ${rc} 0
log ${result}
@{words}= Split String ${result}
${interval}= Get From List ${words} -1
log ${interval}
[return] ${interval}
Set and Validate Default Interval
[Documentation] Sets and validates default interval of pm data
[Arguments] ${device_id} ${interval}
${rc} ${result}= Run and Return Rc and Output voltctl device pmconfig frequency set ${device_id} ${interval}
Should Be Equal As Integers ${rc} 0
log ${result}
# workaround until unit will be printed out in voltctl - remove unit
${interval}= Get Substring ${interval} 0 -1
Should Contain ${result} ${interval}
Set and Validate Group Interval
[Documentation] Sets and validates group interval of pm data
[Arguments] ${device_id} ${interval} ${group}
${rc} ${result}= Run and Return Rc and Output voltctl device pmconfig group set ${device_id} ${group} ${interval}
Should Be Equal As Integers ${rc} 0
${rc} ${result}= Run and Return Rc and Output voltctl device pmconfig group list ${device_id} | grep ${group}
Should Be Equal As Integers ${rc} 0
log ${result}
# workaround until unit will be printed out in voltctl - remove unit
${interval}= Get Substring ${interval} 0 -1
Should Contain ${result} ${interval}
Read Group List
[Documentation] Reads metric group list of given device
[Arguments] ${device_id}
${rc} ${result}= Run and Return Rc and Output voltctl device pmconfig group list ${device_id} | grep -v GROUPNAME
Should Be Equal As Integers ${rc} 0
${group_list} Create List
${interval_dict} Create Dictionary
@{output}= Split String ${result} \n
FOR ${Line} IN @{output}
@{words}= Split String ${Line}
${group}= Set Variable ${words[0]}
${interval}= Set Variable ${words[2]}
Append To List ${group_list} ${group}
Set To Dictionary ${interval_dict} ${group}=${interval}
END
[return] ${group_list} ${interval_dict}
Read Group Metric List
[Documentation] Reads group metric list of given device and group
[Arguments] ${device_id} ${group}
${cmd}= Catenate voltctl device pmconfig groupmetric list ${device_id} ${group} | grep -v SAMPLEFREQ
${rc} ${result}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0
${groupmetric_list} Create List
@{output}= Split String ${result} \n
FOR ${Line} IN @{output}
@{words}= Split String ${Line}
${name}= Set Variable ${words[0]}
${type}= Set Variable ${words[1]}
${enabled}= Set Variable ${words[2]}
${subdict}= Create Dictionary type=${type} enabled=${enabled}
${dict}= Create Dictionary ${name}=${subdict}
Append To List ${groupmetric_list} ${dict}
END
[return] ${groupmetric_list}
Read Group Metric Dict
[Documentation] Reads group metric list of given device and group
[Arguments] ${device_id} ${group}
${cmd}= Catenate voltctl device pmconfig groupmetric list ${device_id} ${group} | grep -v SAMPLEFREQ
${rc} ${result}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0
${groupmetric_dict} Create Dictionary
@{output}= Split String ${result} \n
FOR ${Line} IN @{output}
@{words}= Split String ${Line}
${name}= Set Variable ${words[0]}
${type}= Set Variable ${words[1]}
${enabled}= Set Variable ${words[2]}
${subdict}= Create Dictionary type=${type} enabled=${enabled}
Set To Dictionary ${groupmetric_dict} ${name}=${subdict}
END
[return] ${groupmetric_dict}
# openonu-go-adapter OMCI counter statistics
Get OMCI counter statistics
[Documentation] Delivers the openonu-go-adapter OMCI counter statistics
[Arguments] ${dev_id}
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device getextval onu_omci_stats ${dev_id}
[return] ${rc} ${output}
Get OMCI counter statistics dictionary
[Documentation] Delivers the openonu-go-adapter OMCI counter statistics as dictionary
[Arguments] ${dev_id}
${rc} ${output}= Get OMCI counter statistics ${dev_id}
# check rc
&{output_dict}= Create Dictionary
Return From Keyword If ${rc} != 0 ${rc} ${output_dict}
@{Results}= Split String ${output} \n
FOR ${Line} IN @{Results}
${matched}= Set Variable False
@{words}= Split String ${Line}
${name}= Set Variable ${words[0]}
${value}= Set Variable ${words[1]}
${name}= Remove String ${name} :
Set To Dictionary ${output_dict} ${name} ${value}
END
[return] ${rc} ${output_dict}