| # Copyright 2020 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Test Template handling of ONU Go adapter with BBSIM controlledActivation: only-onu only! |
| ... Values.yaml must contain 'onu: 2' and 'controlledActivation: only-onu' under BBSIM! |
| ... Run robot with bbsim-kind-2x2.yaml |
| Suite Setup Setup Suite |
| Suite Teardown Teardown Suite |
| Test Setup Setup |
| Test Teardown Teardown |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../libraries/onu_utilities.robot |
| Resource ../../libraries/bbsim.robot |
| Resource ../../variables/variables.robot |
| |
| *** Variables *** |
| ${NAMESPACE} voltha |
| ${INFRA_NAMESPACE} default |
| ${timeout} 60s |
| ${of_id} 0 |
| ${logical_id} 0 |
| ${has_dataplane} True |
| ${external_libs} True |
| ${teardown_device} True |
| ${scripts} ../../scripts |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| |
| # flag debugmode is used, if true timeout calculation various, can be passed via the command line too |
| # example: -v debugmode:True |
| ${debugmode} False |
| # logging flag to enable Collect Logs, can be passed via the command line too |
| # example: -v logging:True |
| ${logging} False |
| # if True execution will be paused before clean up |
| # example: -v pausebeforecleanup:True |
| ${pausebeforecleanup} False |
| ${data_dir} ../data |
| |
| # flag to choose the subscriber provisioning command type in ONOS |
| # TT often provision a single services for a subscriber (eg: hsia, voip, ...) one after the other. |
| # if set to True, command used is "volt-add-subscriber-unitag" |
| # if set to False, comand used is "volt-add-subscriber-access" |
| ${unitag_sub} False |
| |
| *** Test Cases *** |
| ONU MIB Template Data Test |
| [Documentation] Validates ONU Go adapter storage of MIB Template Data in etcd and checks the usage |
| ... - setup one ONU |
| ... - request MIB-Upload-Data by ONU via OMCI |
| ... - storage MIB-Upload-Data in etcd |
| ... - store setup duration of ONU |
| ... - check Template-Data in etcd stored (service/%{NAME}/omci_mibs/go_templates/) |
| ... - setup second ONU |
| ... - collect setup durationof second ONU |
| ... - compare both duration |
| ... - duration of second ONU should be at least 10 times faster than the first one |
| ... - MIB-Upload-Data should not requested via OMCI by second ONU |
| ... - MIB-Upload-Data should read from etcd |
| [Tags] functionalOnuGo MibTemplateOnuGo |
| [Setup] Run Keywords Start Logging ONUMibTemplateTest |
| ... AND Setup |
| Perform ONU MIB Template Data Test |
| [Teardown] Run Keywords Printout ONU Serial Number and Device Id |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging ONUMibTemplateTest |
| |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Set up the test suite |
| Start Logging Setup or Teardown Setup-${SUITE NAME} |
| ${LogInfo}= Catenate |
| ... \r\nPassed arguments: |
| ... debugmode:${debugmode}, logging:${logging}, pausebeforecleanup:${pausebeforecleanup}, |
| Log ${LogInfo} console=yes |
| Common Test Suite Setup |
| # delete etcd MIB Template Data |
| Delete MIB Template Data ${INFRA_NAMESPACE} |
| Run Keyword If ${logging} Collect Logs |
| Stop Logging Setup or Teardown Setup-${SUITE NAME} |
| |
| Teardown Suite |
| [Documentation] Replaces the Suite Teardown in utils.robot. |
| ... Cleans up and checks all ONU ports disabled in ONOS. |
| ... Furthermore gives the possibility to pause the execution. |
| Start Logging Setup or Teardown Teardown-${SUITE NAME} |
| Run Keyword If ${pausebeforecleanup} Import Library Dialogs |
| Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up! |
| Run Keyword If ${pausebeforecleanup} Log Teardown will be continued... console=yes |
| Run Keyword If ${teardown_device} Delete All Devices and Verify |
| Wait for Ports in ONOS for all OLTs ${ONOS_SSH_IP} ${ONOS_SSH_PORT} 0 BBSM |
| # delete etcd MIB Template Data (for repeating test) |
| Delete MIB Template Data ${INFRA_NAMESPACE} |
| Run Keyword If ${logging} Collect Logs |
| Stop Logging Setup or Teardown Teardown-${SUITE NAME} |
| Close All ONOS SSH Connections |
| |
| Perform ONU MIB Template Data Test |
| [Documentation] This keyword performs ONU MIB Template Data Test |
| ${firstonu}= Set Variable 0 |
| ${secondonu}= Set Variable 1 |
| ${state2test}= Set Variable omci-flows-pushed |
| Set Global Variable ${state2test} |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| # Start first Onu |
| ${src}= Set Variable ${hosts.src[${0}]} |
| Log \r\nONU ${src['onu']}: startup with MIB upload cycle and storage of template data to etcd. console=yes |
| ${bbsim_pod}= Get Pod Name By Label ${NAMESPACE} release bbsim0 |
| Power On ONU ${NAMESPACE} ${bbsim_pod} ${src['onu']} |
| ${timeStart}= Get Current Date |
| ${firstonustartup}= Get ONU Startup Duration ${firstonu} ${timeStart} |
| # check MIB Template data stored in etcd |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 3s |
| ... Verify MIB Template Data Available ${INFRA_NAMESPACE} |
| # Start second Onu |
| ${src}= Set Variable ${hosts.src[${1}]} |
| Log ONU ${src['onu']}: startup without MIB upload cycle by using of template data of etcd. console=yes |
| ${bbsim_pod}= Get Pod Name By Label ${NAMESPACE} release bbsim0 |
| Power On ONU ${NAMESPACE} ${bbsim_pod} ${src['onu']} |
| ${timeStart}= Get Current Date |
| ${secondonustartup}= Get ONU Startup Duration ${secondonu} ${timeStart} |
| # compare both durations, second onu should be at least 3 times faster |
| ${status} Evaluate ${firstonustartup}>=${secondonustartup}*3 |
| Should Be True ${status} |
| ... Startup durations (${firstonustartup} and ${secondonustartup}) do not full fill the requirements of 1/10. |
| |
| Get ONU Startup Duration |
| [Documentation] This keyword delivers startup duration of onu |
| [Arguments] ${onu} ${starttime} |
| ${src}= Set Variable ${hosts.src[${onu}]} |
| ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= |
| ... Map State ${state2test} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms |
| ... Validate Device ${admin_state} ${oper_status} ${connect_status} |
| ... ${src['onu']} onu=True onu_reason=${onu_state} |
| ${timeCurrent} = Get Current Date |
| ${timeTotalMs} = Subtract Date From Date ${timeCurrent} ${startTime} result_format=number |
| Log ONU ${src['onu']}: reached the state ${onu_state} after ${timeTotalMs} sec. console=yes |
| [Return] ${timeTotalMs} |