| # Copyright 2020 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Library for various openonu-go-adpter utilities |
| |
| |
| *** Keywords *** |
| Calculate Timeout |
| [Documentation] Calculates the timeout regarding num-onus in case of more than 4 onus |
| [Arguments] ${basetimeout}=60s |
| ${new_timeout} Fetch From Left ${basetimeout} s |
| ${new_timeout}= evaluate ${new_timeout}+((${num_all_onus}-4)*10) |
| ${new_timeout}= Set Variable If (not ${debugmode}) and (${new_timeout}>300) |
| ... 300 ${new_timeout} |
| ${new_timeout}= Catenate SEPARATOR= ${new_timeout} s |
| [Return] ${new_timeout} |
| |
| Power On ONU Device |
| [Documentation] This keyword turns on the power for all onus. |
| [Arguments] ${namespace} |
| FOR ${J} IN RANGE 0 ${num_olts} |
| ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| ${bbsim}= Catenate SEPARATOR= bbsim ${J} |
| ${bbsim_pod}= Get Pod Name By Label ${namespace} release ${bbsim} |
| Power On ONU Device per OLT ${namespace} ${olt_serial_number} ${bbsim_pod} |
| END |
| |
| Power On ONU Device per OLT |
| [Documentation] This keyword turns on the power for all onus. |
| [Arguments] ${namespace} ${olt_serial_number} ${bbsim_pod} |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
| Power On ONU ${namespace} ${bbsim_pod} ${src['onu']} |
| END |
| |
| Power Off ONU Device |
| [Documentation] This keyword turns off the power for all onus per olt. |
| [Arguments] ${namespace} |
| FOR ${J} IN RANGE 0 ${num_olts} |
| ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| ${bbsim}= Catenate SEPARATOR= bbsim ${J} |
| ${bbsim_pod}= Get Pod Name By Label ${namespace} release ${bbsim} |
| Power Off ONU Device per OLT ${namespace} ${olt_serial_number} ${bbsim_pod} |
| END |
| |
| Power Off ONU Device per OLT |
| [Documentation] This keyword turns off the power for all onus per olt. |
| [Arguments] ${namespace} ${olt_serial_number} ${bbsim_pod} |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
| Power Off ONU ${namespace} ${bbsim_pod} ${src['onu']} |
| END |
| |
| Current State Test |
| [Documentation] This keyword checks the passed state of the given onu. |
| [Arguments] ${state} ${onu} ${reqadminstate}=${EMPTY} ${reqoperstatus}=${EMPTY} |
| ... ${reqconnectstatus}=${EMPTY} |
| ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= Map State ${state} |
| ${admin_state}= Set Variable If '${reqadminstate}'!='${EMPTY}' ${reqadminstate} ${admin_state} |
| ${oper_status}= Set Variable If '${reqoperstatus}'!='${EMPTY}' ${reqoperstatus} ${oper_status} |
| ${connect_status}= Set Variable If '${reqconnectstatus}'!='${EMPTY}' ${reqconnectstatus} |
| ... ${connect_status} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms |
| ... Validate Device ${admin_state} ${oper_status} ${connect_status} |
| ... ${onu} onu=True onu_reason=${onu_state} |
| |
| Current State Test All Onus |
| [Documentation] This keyword checks the passed state of all onus. |
| ... Hint: ${timeStart} will be not evaluated here! |
| [Arguments] ${state} ${reqadminstate}=${EMPTY} ${reqoperstatus}=${EMPTY} ${reqconnectstatus}=${EMPTY} |
| ... ${alternativeonustate}=${EMPTY} |
| ${timeStart}= Get Current Date |
| ${list_onus} Create List |
| Build ONU SN List ${list_onus} |
| ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= Map State ${state} |
| ${admin_state}= Set Variable If '${reqadminstate}'!='${EMPTY}' ${reqadminstate} ${admin_state} |
| ${oper_status}= Set Variable If '${reqoperstatus}'!='${EMPTY}' ${reqoperstatus} ${oper_status} |
| ${connect_status}= Set Variable If '${reqconnectstatus}'!='${EMPTY}' ${reqconnectstatus} |
| ... ${connect_status} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms |
| ... Validate ONU Devices With Duration |
| ... ${admin_state} ${oper_status} ${connect_status} |
| ... ${onu_state} ${list_onus} ${timeStart} alternate_reason=${alternativeonustate} |
| |
| Log Ports |
| [Documentation] This keyword logs all port data available in ONOS of first port per ONU |
| [Arguments] ${onlyenabled}=False |
| ${cmd} Set Variable If ${onlyenabled} ports -e ports |
| ${onu_ports}= Execute ONOS CLI Command on open connection ${onos_ssh_connection} ${cmd} |
| ${lines} = Get Lines Matching Regexp ${onu_ports} .*portName=BBSM[0-9]{8}-1 |
| Log ${lines} |
| |
| Kill Adaptor |
| [Documentation] This keyword kills the passed adaptor. |
| [Arguments] ${namespace} ${name} |
| ${cmd} Catenate |
| ... kubectl exec -it -n voltha $(kubectl get pods -n ${namespace} | grep ${name} | awk 'NR==1{print $1}') |
| ... -- /bin/sh -c "kill 1" |
| ${rc} ${output}= Run and Return Rc and Output ${cmd} |
| Log ${output} |
| |
| Kill And Check Onu Adaptor |
| [Documentation] This keyword kills ONU Adaptor and waits for it to come up again |
| ... Following steps will be executed: |
| ... - kill openonu adaptor |
| ... - check openonu adaptor is ready again |
| [Arguments] ${namespace} |
| ${list_openonu_apps} Create List adapter-open-onu |
| ${adaptorname}= Set Variable open-onu |
| Kill Adaptor ${namespace} ${adaptorname} |
| Sleep 5s |
| Wait For Pods Ready ${namespace} ${list_openonu_apps} |
| |
| Restart And Check Onu Adaptor |
| [Documentation] This keyword restarts ONU Adaptor and waits for it to come up again |
| ... Following steps will be executed: |
| ... - restart openonu adaptor |
| ... - check openonu adaptor is ready again |
| [Arguments] ${namespace} |
| ${list_openonu_apps} Create List adapter-open-onu |
| ${openonu_label_key} Set Variable app |
| ${openonu_label_value} Set Variable adapter-open-onu |
| Restart Pod By Label ${namespace} ${openonu_label_key} ${openonu_label_value} |
| Sleep 5s |
| Wait For Pods Ready ${namespace} ${list_openonu_apps} |
| |
| Disable Onu Device |
| [Documentation] This keyword disables all onus. |
| ${onu_list} Create List |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_id}= Get Index From List ${onu_list} ${onu_device_id} |
| Continue For Loop If -1 != ${onu_id} |
| Append To List ${onu_list} ${onu_device_id} |
| Disable Device ${onu_device_id} |
| Wait Until Keyword Succeeds 20s 2s Test Devices Disabled in VOLTHA Id=${onu_device_id} |
| END |
| |
| Enable Onu Device |
| [Documentation] This keyword enables all onus. |
| ${onu_list} Create List |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_id}= Get Index From List ${onu_list} ${onu_device_id} |
| Continue For Loop If -1 != ${onu_id} |
| Append To List ${onu_list} ${onu_device_id} |
| Enable Device ${onu_device_id} |
| END |
| |
| Verify MIB Template Data Available |
| [Documentation] This keyword verifies MIB Template Data stored in etcd |
| ${namespace}= Set Variable default |
| ${podname}= Set Variable etcd |
| ${commandget} Catenate |
| ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/omci_mibs/go_templates/' |
| ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| Should Not Be Empty ${result} No MIB Template Data stored in etcd! |
| |
| Delete MIB Template Data |
| [Documentation] This keyword deletes MIB Template Data stored in etcd |
| ${namespace}= Set Variable default |
| ${podname}= Set Variable etcd |
| ${commanddel} Catenate |
| ... /bin/sh -c 'ETCDCTL_API=3 etcdctl del --prefix service/voltha/omci_mibs/go_templates/' |
| ${result}= Exec Pod In Kube ${namespace} ${podname} ${commanddel} |
| Sleep 3s |
| ${commandget} Catenate |
| ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/omci_mibs/go_templates/' |
| ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| Should Be Empty ${result} Could not delete MIB Template Data stored in etcd! |
| |
| Set Tech Profile |
| [Documentation] This keyword sets the passed TechProfile for the test |
| [Arguments] ${TechProfile} |
| Log To Console \nTechProfile:${TechProfile} |
| ${namespace}= Set Variable default |
| ${podname}= Set Variable etcd |
| ${src}= Set Variable ${data_dir}/TechProfile-${TechProfile}.json |
| ${dest}= Set Variable /tmp/flexpod.json |
| ${command} Catenate |
| ... /bin/sh -c 'cat ${dest} | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64' |
| Copy File To Pod ${namespace} ${podname} ${src} ${dest} |
| Exec Pod In Kube ${namespace} ${podname} ${command} |
| ${commandget} Catenate |
| ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/XGS-PON/64' |
| Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| |
| Remove Tech Profile |
| [Documentation] This keyword removes TechProfile |
| Log To Console \nTechProfile:${TechProfile} |
| ${namespace}= Set Variable default |
| ${podname}= Set Variable etcd |
| ${command} Catenate |
| ... /bin/sh -c 'ETCDCTL_API=3 etcdctl del --prefix service/voltha/technology_profiles/XGS-PON/64' |
| Exec Pod In Kube ${namespace} ${podname} ${command} |
| ${commandget} Catenate |
| ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/XGS-PON/64' |
| Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| |
| Validate Onu Data In Etcd |
| [Documentation] This keyword validates openonu-go-adapter Data stored in etcd. |
| ... It checks unique of serial_number and combination of pon, onu and uni in tp_path. |
| ... Furthermore it evaluates the values of onu_id and uni_id with values read from tp_path. |
| ... Number of etcd entries has to match with the passed number. |
| [Arguments] ${nbofetcddata}=${num_all_onus} ${defaultkvstoreprefix}=voltha_voltha |
| ... ${without_prefix}=True ${without_pm_data}=True |
| ${kvstoreprefix}= Get Kv Store Prefix ${defaultkvstoreprefix} |
| ${etcddata}= Get ONU Go Adapter ETCD Data ${kvstoreprefix} ${without_prefix} ${without_pm_data} |
| #prepare result for json convert |
| ${result}= Prepare ONU Go Adapter ETCD Data For Json ${etcddata} |
| ${jsondata}= To Json ${result} |
| ${length}= Get Length ${jsondata} |
| log ${jsondata} |
| Run Keyword And Continue On Failure Should Be Equal As Integers ${length} ${nbofetcddata} |
| ... msg=Number etcd data (${length}) does not match required (${nbofetcddata})! |
| ${oltpononuuniidlist}= Create List |
| ${serialnumberlist}= Create List |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| # TODO: The TP ID is hardcoded to 64 below. It is fine when testing single-tcont workflow. |
| # When testing multi-tcont this may need some adjustment. |
| Exit For Loop If not ('uni_config' in $value) |
| ${tp_path}= Get From Dictionary ${value['uni_config'][0]['PersTpPathMap']} 64 |
| ${oltpononuuniid}= Read Pon Onu Uni String ${tp_path} |
| ${list_id}= Get Index From List ${oltpononuuniidlist} ${oltpononuuniid} |
| Should Be Equal As Integers ${list_id} -1 |
| ... msg=Combination of Pon, Onu and Uni (${oltpononuuniid}) exist multiple in etcd data! |
| Append To List ${oltpononuuniidlist} ${oltpononuuniid} |
| Validate Onu Id ${value} |
| Validate Uni Id ${value} |
| ${serial_number}= Get From Dictionary ${value} serial_number |
| ${list_id}= Get Index From List ${serialnumberlist} ${serial_number} |
| Should Be Equal As Integers ${list_id} -1 |
| ... msg=Serial number (${serial_number}) exists multiple in etcd data! |
| Append To List ${serialnumberlist} ${serial_number} |
| END |
| |
| Validate Vlan Rules In Etcd |
| [Documentation] This keyword validates Vlan rules of openonu-go-adapter Data stored in etcd. |
| ... It checks the given number of cookie_slice, match_vid (=4096) and set_vid. |
| ... Furthermore it returns a list of all set_vid. |
| ... In case of a passed dictionary containing set_vids these will be checked for to |
| ... current set-vid depending on setvidequal (True=equal, False=not equal). |
| [Arguments] ${nbofcookieslice}=1 ${reqmatchvid}=4096 ${prevvlanrules}=${NONE} ${setvidequal}=False |
| ... ${defaultkvstoreprefix}=voltha_voltha ${without_prefix}=True ${without_pm_data}=True |
| ${kvstoreprefix}= Get Kv Store Prefix ${defaultkvstoreprefix} |
| ${etcddata}= Get ONU Go Adapter ETCD Data ${kvstoreprefix} ${without_prefix} ${without_pm_data} |
| #prepare result for json convert |
| ${result}= Prepare ONU Go Adapter ETCD Data For Json ${etcddata} |
| ${jsondata}= To Json ${result} |
| ${length}= Get Length ${jsondata} |
| log ${jsondata} |
| ${vlan_rules}= Create Dictionary |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| # TODO: The TP ID is hardcoded to 64 below. It is fine when testing single-tcont workflow. |
| # When testing multi-tcont this may need some adjustment. |
| ${tp_path}= Get From Dictionary ${value['uni_config'][0]['PersTpPathMap']} 64 |
| ${oltpononuuniid}= Read Pon Onu Uni String ${tp_path} |
| ${cookieslice}= Get From Dictionary ${value['uni_config'][0]['flow_params'][0]} cookie_slice |
| #@{cookieslicelist}= Split String ${cookieslice} , |
| ${foundcookieslices}= Get Length ${cookieslice} |
| Should Be Equal As Integers ${foundcookieslices} ${nbofcookieslice} |
| ${matchvid}= Get From Dictionary ${value['uni_config'][0]['flow_params'][0]['vlan_rule_params']} |
| ... match_vid |
| Should Be Equal As Integers ${matchvid} ${reqmatchvid} |
| ${setvid}= Get From Dictionary ${value['uni_config'][0]['flow_params'][0]['vlan_rule_params']} |
| ... set_vid |
| ${evalresult}= Evaluate 2 <= ${setvid} <= 4095 |
| Should Be True ${evalresult} msg=set_vid out of range (${setvid})! |
| Set To Dictionary ${vlan_rules} ${oltpononuuniid} ${setvid} |
| ${oldsetvidvalid} Set Variable If ${prevvlanrules} is ${NONE} False True |
| ${prevsetvid}= Set Variable If ${oldsetvidvalid} ${prevvlanrules['${oltpononuuniid}']} |
| Run Keyword If ${oldsetvidvalid} and ${setvidequal} |
| ... Should Be Equal As Integers ${prevsetvid} ${setvid} |
| ... ELSE IF ${oldsetvidvalid} and not ${setvidequal} |
| ... Should Not Be Equal As Integers ${prevsetvid} ${setvid} |
| END |
| log Many ${vlan_rules} |
| [Return] ${vlan_rules} |
| |
| Get ONU Go Adapter ETCD Data |
| [Documentation] This keyword delivers openonu-go-adapter Data stored in etcd |
| [Arguments] ${defaultkvstoreprefix}=voltha_voltha ${without_prefix}=True ${without_pm_data}=True |
| ${namespace}= Set Variable default |
| ${podname}= Set Variable etcd |
| ${kvstoreprefix}= Get Kv Store Prefix ${defaultkvstoreprefix} |
| ${commandget}= Catenate |
| ... /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/${kvstoreprefix}/openonu' |
| ${commandget}= Run Keyword If ${without_prefix} Catenate ${commandget} |
| ... | grep -v service/${kvstoreprefix}/openonu |
| ... ELSE Set Variable ${commandget} |
| ${commandget}= Run Keyword If ${without_pm_data} Catenate ${commandget} | grep -v instances_active |
| ... ELSE Set Variable ${commandget} |
| ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| log ${result} |
| [Return] ${result} |
| |
| Prepare ONU Go Adapter ETCD Data For Json |
| [Documentation] This keyword prepares openonu-go-adapter Data stored in etcd for converting |
| ... to json |
| [Arguments] ${etcddata} |
| #prepare result for json convert |
| ${prepresult}= Replace String ${etcddata} \n , |
| ${prepresult}= Strip String ${prepresult} mode=right characters=, |
| ${prepresult}= Set Variable [${prepresult}] |
| log ${prepresult} |
| [Return] ${prepresult} |
| |
| Read Pon Onu Uni String |
| [Documentation] This keyword builds a four digit string using Olt, Pon, Onu and Uni value of given tp-path taken |
| ... taken from etcd data of onu go adapter |
| [Arguments] ${tp_path} |
| ${tppathlines}= Replace String ${tp_path} / \n |
| ${olt}= Get Value Of Tp Path Element ${tppathlines} olt |
| ${pon}= Get Value Of Tp Path Element ${tppathlines} pon |
| ${onu}= Get Value Of Tp Path Element ${tppathlines} onu |
| ${uni}= Get Value Of Tp Path Element ${tppathlines} uni |
| ${valuesid}= Set Variable ${olt}/${pon}/${onu}/${uni} |
| log ${valuesid} |
| [Return] ${valuesid} |
| |
| Get Value Of Tp Path Element |
| [Documentation] This keyword delivers numeric value of given tp path element. |
| [Arguments] ${tp_path_lines} ${element} |
| ${value}= Get Lines Containing String ${tp_path_lines} ${element}-\{ |
| ${value}= Remove String ${value} ${element}-\{ |
| ${value}= Remove String ${value} \} |
| log ${value} |
| [Return] ${value} |
| |
| Validate Onu Id |
| [Documentation] This keyword validates ONU Id of passed etcd data. |
| [Arguments] ${value} |
| # TODO: The TP ID is hardcoded to 64 below. It is fine when testing single-tcont workflow. |
| # When testing multi-tcont this may need some adjustment. |
| ${tp_path}= Get From Dictionary ${value['uni_config'][0]['PersTpPathMap']} 64 |
| ${tppathlines}= Replace String ${tp_path} / \n |
| ${onu}= Get Value Of Tp Path Element ${tppathlines} onu |
| ${onu_id}= Get From Dictionary ${value} onu_id |
| Should Be Equal As Integers ${onu} ${onu_id} |
| ... msg=Onu-Id (${onu_id}) does not match onu (${onu}) from tp_path in etcd data! |
| Should Be True ${onu_id}>=1 |
| |
| Validate Uni Id |
| [Documentation] This keyword validates UNI Id of passed etcd data. |
| [Arguments] ${value} |
| # TODO: The TP ID is hardcoded to 64 below. It is fine when testing single-tcont workflow. |
| # When testing multi-tcont this may need some adjustment. |
| ${tp_path}= Get From Dictionary ${value['uni_config'][0]['PersTpPathMap']} 64 |
| ${tppathlines}= Replace String ${tp_path} / \n |
| ${uni}= Get Value Of Tp Path Element ${tppathlines} uni |
| ${uni_id}= Get From Dictionary ${value['uni_config'][0]} uni_id |
| Should Be Equal As Integers ${uni} ${uni_id} |
| ... msg=Uni-Id (${uni_id}) does not match onu (${uni}) from tp_path in etcd data! |
| |
| Delete ONU Go Adapter ETCD Data |
| [Documentation] This keyword deletes openonu-go-adapter Data stored in etcd |
| [Arguments] ${defaultkvstoreprefix}=voltha_voltha ${validate}=False |
| ${namespace}= Set Variable default |
| ${podname}= Set Variable etcd |
| ${kvstoreprefix}= Get Kv Store Prefix ${defaultkvstoreprefix} |
| ${commandget}= Catenate |
| ... /bin/sh -c 'ETCDCTL_API=3 etcdctl del --prefix service/${kvstoreprefix}/openonu' |
| ${result}= Exec Pod In Kube ${namespace} ${podname} ${commandget} |
| log ${result} |
| Run Keyword If ${validate} Wait Until Keyword Succeeds ${timeout} 1s |
| ... Validate Onu Data In Etcd 0 without_pm_data=False |
| [Return] ${result} |
| |
| Wait for Ports in ONOS for all OLTs |
| [Documentation] Waits untill a certain number of ports are enabled in all OLTs |
| [Arguments] ${onos_ssh_connection} ${count} ${filter} ${max_wait_time}=10m ${determine_number}=False |
| FOR ${J} IN RANGE 0 ${num_olts} |
| ${olt_serial_number}= Set Variable ${list_olts}[${J}][sn] |
| ${onu_count}= Set Variable ${list_olts}[${J}][onucount] |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| ... ${olt_serial_number} |
| Set Global Variable ${of_id} |
| ${count2check}= Set Variable If ${count}==${num_all_onus} ${onu_count} ${count} |
| # if flag determine_number is set to True, always determine the number of real ONUs (overwrite previous value) |
| ${count2check}= Run Keyword If ${determine_number} Determine Number Of ONU ${olt_serial_number} |
| ... ELSE Set Variable ${count2check} |
| Wait for Ports in ONOS ${onos_ssh_connection} ${count2check} ${of_id} BBSM ${max_wait_time} |
| END |
| |
| Wait for all ONU Ports in ONOS Disabled |
| [Documentation] Waits untill a all ONU ports are disabled in all ONOS |
| [Arguments] ${onos_ssh_connection} |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| ... ${src['olt']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} ${of_id} |
| Wait Until Keyword Succeeds ${timeout} 2s Assert ONU Port Is Disabled ${onos_ssh_connection} ${of_id} |
| ... ${onu_port} |
| END |
| |
| Map State |
| [Documentation] This keyword converts the passed numeric value or name of a onu state to its state values. |
| [Arguments] ${state} |
| # create state lists with corresponding return values |
| # ADMIN-STATE OPER-STATUS CONNECT-STATUS ONU-STATE (number/name) |
| ${state1} Create List ENABLED ACTIVATING REACHABLE 1 activating-onu |
| ${state2} Create List ENABLED ACTIVATING REACHABLE 2 starting-openomci |
| ${state3} Create List ENABLED ACTIVATING REACHABLE 3 discovery-mibsync-complete |
| ${state4} Create List ENABLED ACTIVE REACHABLE 4 initial-mib-downloaded |
| ${state5} Create List ENABLED ACTIVE REACHABLE 5 tech-profile-config-download-success |
| ${state6} Create List ENABLED ACTIVE REACHABLE 6 omci-flows-pushed |
| ${state7} Create List DISABLED UNKNOWN REACHABLE 7 omci-admin-lock |
| ${state8} Create List ENABLED ACTIVE REACHABLE 8 onu-reenabled |
| ${state9} Create List ENABLED DISCOVERED UNREACHABLE 9 stopping-openomci |
| ${state10} Create List ENABLED DISCOVERED REACHABLE 10 rebooting |
| ${state11} Create List ENABLED DISCOVERED REACHABLE 11 omci-flows-deleted |
| ${state12} Create List DISABLED UNKNOWN REACHABLE 12 tech-profile-config-delete-success |
| ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= Set Variable If |
| ... '${state}'=='1' or '${state}'=='activating-onu' ${state1} |
| ... '${state}'=='2' or '${state}'=='starting-openomci' ${state2} |
| ... '${state}'=='3' or '${state}'=='discovery-mibsync-complete' ${state3} |
| ... '${state}'=='4' or '${state}'=='initial-mib-downloaded' ${state4} |
| ... '${state}'=='5' or '${state}'=='tech-profile-config-download-success' ${state5} |
| ... '${state}'=='6' or '${state}'=='omci-flows-pushed' ${state6} |
| ... '${state}'=='7' or '${state}'=='omci-admin-lock' ${state7} |
| ... '${state}'=='8' or '${state}'=='onu-reenabled' ${state8} |
| ... '${state}'=='9' or '${state}'=='stopping-openomci' ${state9} |
| ... '${state}'=='10' or '${state}'=='rebooting' ${state10} |
| ... '${state}'=='11' or '${state}'=='omci-flows-deleted' ${state11} |
| ... '${state}'=='12' or '${state}'=='tech-profile-config-delete-success' ${state12} |
| [Return] ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state} |