| # Copyright 2021 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Test of open ONU go adapter PM data |
| ... in case of kafka pod runs in k8s cluster - kafka has to deploy with following EXTRA_HELM_FLAGS |
| ... --set externalAccess.enabled=true, |
| ... --set externalAccess.service.type=NodePort, |
| ... --set externalAccess.service.nodePorts[0]=${KAFKA_PORT}, |
| ... --set externalAccess.service.domain=${KAFKA_IP} |
| ... with e.g. service.domain=10.0.02.15 or 127.0.0.1 and service.nodePorts[0]=30201! |
| Suite Setup Setup Suite |
| Suite Teardown Teardown Suite |
| Test Setup Setup |
| Test Teardown Teardown |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../libraries/onu_utilities.robot |
| Resource ../../libraries/bbsim.robot |
| Resource ../../libraries/pm_utilities.robot |
| Resource ../../variables/variables.robot |
| |
| Library kafka_robot.KafkaClient log_level=DEBUG WITH NAME kafka |
| Library grpc_robot.VolthaTools WITH NAME volthatools |
| |
| |
| *** Variables *** |
| ${namespace} voltha |
| ${timeout} 60s |
| ${of_id} 0 |
| ${logical_id} 0 |
| ${has_dataplane} True |
| ${external_libs} True |
| ${teardown_device} True |
| ${scripts} ../../scripts |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| |
| # logging flag to enable Collect Logs, can be passed via the command line too |
| # example: -v logging:True |
| ${logging} False |
| # determines the environment workflow: DT, TT or ATT (default) |
| # example: -v workflow:DT |
| ${workflow} ATT |
| # when voltha is running in k8s port forwarding is needed |
| # example: -v PORT_FORWARDING:False |
| ${PORT_FORWARDING} True |
| # kafka ip e.g. ip of master host where k8s is running |
| # example: -v KAFKA_IP:10.0.2.15 |
| ${KAFKA_IP} 127.0.0.1 |
| # kafka port: port of kafka nodeport |
| # example: -v KAFKA_PORT:30201 |
| ${KAFKA_PORT} 30201 |
| # kafka service port: service port of kafka nodeport |
| # example: -v KAFKA_SVC_PORT:9094 |
| ${KAFKA_SVC_PORT} 9094 |
| # onu pm data default interval |
| # example: -v ONU_DEFAULT_INTERVAL:50s |
| ${ONU_DEFAULT_INTERVAL} 300s |
| # onu pm data group PON_Optical interval |
| # example: -v ONU_PON_OPTICAL_INTERVAL:50s |
| ${ONU_PON_OPTICAL_INTERVAL} 35s |
| # onu pm data group UNI_Status interval |
| # example: -v ONU_UNI_STATUS_INTERVAL:50s |
| ${ONU_UNI_STATUS_INTERVAL} 20s |
| |
| *** Test Cases *** |
| Check Default Metrics All ONUs |
| [Documentation] Validates the ONU Go adapter pm date resp. Metrics with dafault values |
| [Tags] functional CheckDefaultMetricsAllOnus |
| [Setup] Start Logging CheckDefaultMetricsAllOnus |
| ${collect_interval}= Determine Collection Interval |
| Collect and Validate PM Data ${collect_interval} |
| [Teardown] Run Keywords Clean Metric Dictionary |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging CheckDefaultMetricsAllOnus |
| |
| Check User Onu Metrics |
| [Documentation] Validates the ONU Go adapter pm date resp. Metrics with user values |
| ... Currently only the intvals of metric groups UNI_Status and PON_Optical will be set to user values. |
| [Tags] functional CheckUserOnuMetrics |
| [Setup] Start Logging CheckUserOnuMetrics |
| # set user values for intervals |
| Set Group Interval All Onu UNI_Status ${ONU_UNI_STATUS_INTERVAL} |
| Set Group Interval All Onu PON_Optical ${ONU_PON_OPTICAL_INTERVAL} |
| ${collect_interval}= Determine Collection Interval user=True |
| # activate user interval values |
| Activate And Validate Interval All Onu user=True |
| Collect and Validate PM Data ${collect_interval} user=True |
| # (re-)activate default interval values |
| Set Group Interval All Onu UNI_Status -1 |
| Set Group Interval All Onu PON_Optical -1 |
| Activate And Validate Interval All Onu |
| [Teardown] Run Keywords Clean Metric Dictionary |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging CheckUserOnuMetrics |
| |
| Check User Onu Metrics Disabled Device |
| [Documentation] Validates the ONU Go adapter pm date resp. Metrics with user values for disabled device |
| ... Currently only the intvals of metric groups UNI_Status will be set to user values and validated. |
| ... First enable status will be validated, then all devices will be disabled and status will be validated. |
| [Tags] functional CheckUserOnuMetricsDisabledDevice |
| [Setup] Start Logging CheckUserOnuMetricsDisabledDevice |
| # set user values for intervals |
| Set Group Interval All Onu UNI_Status ${ONU_UNI_STATUS_INTERVAL} |
| ${collect_interval}= Determine Collection Interval user=True |
| # activate user interval values |
| Activate And Validate Interval All Onu user=True |
| # read and store currents validation data |
| ${group}= Set Variable UNI_Status |
| ${oper_state}= Set Variable oper_status |
| ${admin_state}= Set Variable uni_admin_state |
| ${prev_validation_data_oper_state}= Get Validation Operation All Onu ${group} ${oper_state} |
| ${prev_validation_data_admin_state}= Get Validation Operation All Onu ${group} ${admin_state} |
| # change the validation data for oper_status and uni_admin_state of metric group UNI_Status |
| ${enable}= Set Variable 0 |
| ${disable}= Set Variable 1 |
| ${enabled_check}= Create Dictionary operator=${eq} operand=${enable} |
| ${disabled_check}= Create Dictionary operator=${eq} operand=${disable} |
| ${ValidationEnabled}= Create Dictionary first=${enabled_check} successor=${enabled_check} |
| ${ValidationDisabled}= Create Dictionary first=${disabled_check} successor=${disabled_check} |
| # validate enabled status |
| Set Validation Operation All Onu ${group} ${oper_state} ${ValidationEnabled} |
| Set Validation Operation All Onu ${group} ${admin_state} ${ValidationEnabled} |
| Collect and Validate PM Data ${collect_interval} user=True |
| Clean Metric Dictionary |
| # validate disabled status |
| Set Validation Operation All Onu ${group} ${oper_state} ${ValidationDisabled} |
| Set Validation Operation All Onu ${group} ${admin_state} ${ValidationDisabled} |
| # disable (all) onu devices |
| Disable Onu Device |
| ${alternativeonustates}= Create List omci-flows-deleted tech-profile-config-delete-success |
| Current State Test All Onus omci-admin-lock alternativeonustate=${alternativeonustates} |
| Log Ports |
| #check no port is enabled in ONOS |
| Wait for Ports in ONOS for all OLTs ${onos_ssh_connection} 0 BBSM |
| Collect and Validate PM Data ${collect_interval} user=True |
| Clean Metric Dictionary |
| # enable (all) onu devices |
| Enable Onu Device |
| ${alternativeonustates}= Create List onu-reenabled |
| Current State Test All Onus omci-flows-pushed alternativeonustate=${alternativeonustates} |
| Log Ports onlyenabled=True |
| #check that all the UNI ports show up in ONOS again |
| Wait for Ports in ONOS for all OLTs ${onos_ssh_connection} ${num_all_onus} BBSM determine_number=True |
| # validate enabled status (again) |
| Set Validation Operation All Onu ${group} ${oper_state} ${ValidationEnabled} |
| Set Validation Operation All Onu ${group} ${admin_state} ${ValidationEnabled} |
| Collect and Validate PM Data ${collect_interval} user=True |
| # (re-)set previous validation data |
| Set Validation Operation Passed Onu ${group} ${oper_state} ${prev_validation_data_oper_state} |
| Set Validation Operation Passed Onu ${group} ${admin_state} ${prev_validation_data_admin_state} |
| # (re-)activate default interval values |
| Set Group Interval All Onu UNI_Status -1 |
| Activate And Validate Interval All Onu |
| [Teardown] Run Keywords Clean Metric Dictionary |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging CheckUserOnuMetricsDisabledDevice |
| |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Set up the test suite |
| Common Test Suite Setup |
| ${onos_ssh_connection} Open ONOS SSH Connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| Set Suite Variable ${onos_ssh_connection} |
| ${switch_type}= Get Variable Value ${web_power_switch.type} |
| Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type} |
| # start port forwarding if needed (when voltha runs in k8s) |
| ${portFwdHandle} = Run Keyword If ${PORT_FORWARDING} Start Process |
| ... kubectl port-forward --address 0.0.0.0 --namespace default svc/kafka-0-external ${KAFKA_PORT}:${KAFKA_SVC_PORT} & |
| ... shell=true |
| Set Suite Variable ${portFwdHandle} |
| Sleep 5s |
| # open connection to read kafka bus |
| Wait Until Keyword Succeeds 3x 5s |
| ... kafka.Connection Open ${KAFKA_IP} ${KAFKA_PORT} voltha.events timestamp_from=0 |
| # enable OLT(s) and bring up ONU(s) |
| Setup |
| Run Keyword If "${workflow}"=="DT" Perform Sanity Test DT |
| ... ELSE IF "${workflow}"=="TT" Perform Sanity Tests TT |
| ... ELSE Perform Sanity Test |
| # prepare pm data matrix for validation |
| ${METRIC_DICT}= Create Metric Dictionary |
| Set Suite Variable ${METRIC_DICT} |
| |
| Teardown Suite |
| [Documentation] tear down the test suite |
| # close connection to kafka |
| kafka.Connection Close |
| # stop port forwarding if started |
| Run Keyword If ${PORT_FORWARDING} Terminate Process ${portFwdHandle} kill=true |
| # call common suite teardown |
| utils.Teardown Suite |
| Close All ONOS SSH Connections |