blob: 929f81574a95767697b1861b2562ad306a250a0a [file] [log] [blame]
*** Settings ***
Documentation Test states of ONU Go adapter
Suite Setup Setup Suite
Suite Teardown Teardown Suite
Test Setup Setup
Test Teardown Teardown
Library Collections
Library String
Library OperatingSystem
Library XML
Library RequestsLibrary
Library ../../libraries/DependencyLibrary.py
Resource ../../libraries/onos.robot
Resource ../../libraries/voltctl.robot
Resource ../../libraries/voltha.robot
Resource ../../libraries/utils.robot
Resource ../../libraries/k8s.robot
Resource ../../variables/variables.robot
*** Variables ***
${POD_NAME} flex-ocp-cord
${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
${HELM_CHARTS_DIR} ~/helm-charts
${VOLTHA_POD_NUM} 8
${NAMESPACE} voltha
# For below variable value, using deployment name as using grep for
# parsing radius pod name, we can also use full radius pod name
${RESTART_POD_NAME} radius
${timeout} 180s
${of_id} 0
${logical_id} 0
${has_dataplane} True
${external_libs} True
${teardown_device} True
${scripts} ../../scripts
# Per-test logging on failure is turned off by default; set this variable to enable
${container_log_dir} ${None}
# state to test variable, can be passed via the command line too
${state2test} 6
${testmode} SingleState
${porttest} True
${debugmode} False
${pausebeforecleanup} False
*** Test Cases ***
ONU State Test
[Documentation] Validates the ONU Go adapter states
[Tags] statetest onutest
[Setup] Run Keywords Start Logging ONUStateTest
... AND Setup Test
Run Keyword If ${has_dataplane} Clean Up Linux
Enable Device ${olt_device_id}
${timeStart} = Get Current Date
Set Global Variable ${timeStart}
Run Keyword If "${testmode}"=="SingleState" Do ONU Single State Test
... ELSE IF "${testmode}"=="Up2State" Do ONU Up To State Test
... ELSE IF "${testmode}"=="SingleStateTime" Do ONU Single State Test Time
... ELSE Fail The testmode (${testmode}) is not valid!
[Teardown] Run Keywords Collect Logs
... AND Stop Logging ONUStateTest
Onu Port Check
[Documentation] Validates the ONU Go adapter states
... Assuming that ONU State Test was executed where all the ONUs are reached the expected state!
[Tags] onutest
[Setup] Start Logging ONUPortTest
Run Keyword If ${porttest} Do Onu Port Check
[Teardown] Run Keywords Collect Logs
... AND Stop Logging ONUPortTest
*** Keywords ***
Setup Suite
[Documentation] Set up the test suite
Common Test Suite Setup
Run Keyword If ${num_onus}>4 Calculate Timeout
Teardown Suite
[Documentation] Replaces the Suite Teardown in utils.robot.
... Cleans up and checks all ONU ports disabled in ONOS.
... Furthermore gives the possibility to pause the execution.
Run Keyword If ${pausebeforecleanup} Import Library Dialogs
Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up!
Run Keyword If ${teardown_device} Delete All Devices and Verify
Wait for Ports in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} 0 BBSM
Setup Test
[Documentation] Pre-test Setup
#test for empty device list
Test Empty Device List
Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s Openolt is Up
... ${olt_ssh_ip} ${olt_user} ${olt_pass}
Run Keyword If ${has_dataplane} Sleep 60s
#create/preprovision device
${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
Set Suite Variable ${olt_device_id}
#validate olt states
Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
... ${olt_device_id}
Sleep 5s
Calculate Timeout
[Documentation] Calculates the timeout regarding num-onus in case of more than 4 onus
${timeout} Fetch From Left ${timeout} s
${timeout}= evaluate ${timeout}+((${num_onus}-4)*30)
${timeout}= Set Variable If (not ${debugmode}) and (${timeout}>600) 600 ${timeout}
${timeout}= Catenate SEPARATOR= ${timeout} s
Set Suite Variable ${timeout}
#Log \r\nTimeout: ${timeout} INFO console=True
Do ONU Up To State Test
[Documentation] This keyword performs Up2State Test
... All states up to the passed have to be checked
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
Run Keyword If ${state2test}>=1
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVATING REACHABLE
... ${src['onu']} onu=True onu_reason=activating-onu
Run Keyword If ${state2test}>=2
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVATING REACHABLE
... ${src['onu']} onu=True onu_reason=starting-openomci
Run Keyword If ${state2test}>=3
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVATING REACHABLE
... ${src['onu']} onu=True onu_reason=discovery-mibsync-complete
Run Keyword If ${state2test}>=4
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=initial-mib-downloaded
Run Keyword If ${state2test}>=5
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=tech-profile-config-download-success
Run Keyword If ${state2test}>=6
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=omci-flows-pushed
END
Do ONU Single State Test
[Documentation] This keyword performs SingleState Test
... Only the passed state has to be checked
FOR ${I} IN RANGE 0 ${num_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
Run Keyword If ${state2test}==1
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVATING REACHABLE
... ${src['onu']} onu=True onu_reason=activating-onu
... ELSE IF ${state2test}==2
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVATING REACHABLE
... ${src['onu']} onu=True onu_reason=starting-openomci
... ELSE IF ${state2test}==3
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVATING REACHABLE
... ${src['onu']} onu=True onu_reason=discovery-mibsync-complete
... ELSE IF ${state2test}==4
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=initial-mib-downloaded
... ELSE IF ${state2test}==5
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=tech-profile-config-download-success
... ELSE IF ${state2test}==6
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate Device ENABLED ACTIVE REACHABLE
... ${src['onu']} onu=True onu_reason=omci-flows-pushed
... ELSE Fail The state to test (${state2test}) is not valid!
END
Do ONU Single State Test Time
[Documentation] This keyword performs SingleState Test with calculate running time
... Only the passed state has to be checked and the duration each single onu adapter needed
... will be calculated and printed out
${ListfinishedONUs} Create List
Set Global Variable ${ListfinishedONUs}
Create File ONU_Startup_Time.txt This file contains the startup times of all ONUs.
${list_onus} Create List
Build ONU SN List ${list_onus}
Run Keyword If ${state2test}==1
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate ONU Devices MIB State With Duration
... activating-onu ${list_onus} ${timeStart} print2console=True
... output_file=ONU_Startup_Time.txt
... ELSE IF ${state2test}==2
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate ONU Devices MIB State With Duration
... starting-openomci ${list_onus} ${timeStart} print2console=True
... output_file=ONU_Startup_Time.txt
... ELSE IF ${state2test}==3
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate ONU Devices MIB State With Duration
... discovery-mibsync-complete ${list_onus} ${timeStart} print2console=True
... output_file=ONU_Startup_Time.txt
... ELSE IF ${state2test}==4
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate ONU Devices MIB State With Duration
... initial-mib-downloaded ${list_onus} ${timeStart} print2console=True
... output_file=ONU_Startup_Time.txt
... ELSE IF ${state2test}==5
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate ONU Devices MIB State With Duration
... tech-profile-config-download-success ${list_onus} ${timeStart} print2console=True
... output_file=ONU_Startup_Time.txt
... ELSE IF ${state2test}==6
... Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 50ms
... Validate ONU Devices MIB State With Duration
... omci-flows-pushed ${list_onus} ${timeStart} print2console=True
... output_file=ONU_Startup_Time.txt
... ELSE Fail The state to test (${state2test}) is not valid!
Do Onu Port Check
[Documentation] Check that all the UNI ports show up in ONOS
Wait for Ports in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${num_onus} BBSM