| # Copyright 2021 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # FIXME Can we use the same test against BBSim and Hardware? |
| |
| *** Settings *** |
| Documentation Test Voltha Components Software Upgrade |
| Suite Setup Setup Suite |
| Test Setup Setup |
| Test Teardown Teardown |
| Suite Teardown Teardown Suite |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../variables/variables.robot |
| Resource ../../libraries/power_switch.robot |
| |
| *** Variables *** |
| ${POD_NAME} flex-ocp-cord |
| ${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs |
| #${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml |
| ${HELM_CHARTS_DIR} ~/helm-charts |
| ${VOLTHA_POD_NUM} 8 |
| ${NAMESPACE} voltha |
| # For below variable value, using deployment name as using grep for |
| # parsing radius pod name, we can also use full radius pod name |
| ${RESTART_POD_NAME} radius |
| ${timeout} 60s |
| ${of_id} 0 |
| ${logical_id} 0 |
| ${has_dataplane} True |
| ${teardown_device} False |
| ${scripts} ../../scripts |
| |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| |
| # logging flag to enable Collect Logs, can be passed via the command line too |
| # example: -v logging:False |
| ${logging} True |
| |
| ${suppressaddsubscriber} True |
| |
| # Voltha Components to Test for Software Upgrade need to be passed in the following variable in format: |
| # <comp-label>,<comp-container>,<comp-image>*<comp-label>,<comp-container>,<comp-image>* |
| # Example: adapter-open-olt,adapter-open-olt,voltha/voltha-openolt-adapter:3.1.3* |
| ${voltha_comps_under_test} ${EMPTY} |
| |
| *** Test Cases *** |
| Test Voltha Components Minor Version Upgrade |
| [Documentation] Validates the Voltha Components Minor Version Upgrade doesn't affect the system functionality |
| ... Performs the sanity and verifies all the ONUs are authenticated/DHCP/pingable |
| ... Requirement: Components to test needs to be passed in robot command variable 'voltha_comps_under_test' in the format: |
| ... <comp-label>,<comp-container>,<comp-image>*<comp-label>,<comp-container>,<comp-image>* |
| ... Check [VOL-3843] for more details |
| [Tags] functional VolthaCompMinorVerUpgrade |
| [Setup] Start Logging VolthaCompMinorVerUpgrade |
| [Teardown] Run Keywords Collect Logs |
| ... AND Stop Logging VolthaCompMinorVerUpgrade |
| ... AND Delete All Devices and Verify |
| # Add OLT device |
| Setup |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countBeforeUpgrade}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| ${num_comps_under_test}= Get Length ${list_voltha_comps_under_test} |
| FOR ${I} IN RANGE 0 ${num_comps_under_test} |
| ${label}= Set Variable ${list_voltha_comps_under_test}[${I}][label] |
| ${container}= Set Variable ${list_voltha_comps_under_test}[${I}][container] |
| ${image}= Set Variable ${list_voltha_comps_under_test}[${I}][image] |
| ${pod_image} ${app_ver} ${helm_chart} Get Pod Image And App Version And Helm Chart By Label |
| ... ${NAMESPACE} app ${label} |
| Log ${label}: image, app ver & helm chart before upgrade: ${pod_image}, ${app_ver} & ${helm_chart} |
| ${deployment}= Wait Until Keyword Succeeds ${timeout} 15s |
| ... Get K8s Deployment by Pod Label ${NAMESPACE} app ${label} |
| Wait Until Keyword Succeeds ${timeout} 15s Deploy Pod New Image ${NAMESPACE} ${deployment} |
| ... ${container} ${image} |
| Wait Until Keyword Succeeds ${timeout} 3s Validate Pods Status By Label ${NAMESPACE} |
| ... app ${label} Running |
| Wait Until Keyword Succeeds ${timeout} 3s Pods Are Ready By Label ${NAMESPACE} app ${label} |
| Wait Until Keyword Succeeds ${timeout} 3s Verify Pod Image ${NAMESPACE} app ${label} ${image} |
| ${pod_image_1} ${app_ver_1} ${helm_chart_1} Get Pod Image And App Version And Helm Chart By Label |
| ... ${NAMESPACE} app ${label} |
| Log ${label}: image, app ver & helm chart after upgrade: ${pod_image_1}, ${app_ver_1} & ${helm_chart_1} |
| Restart VOLTHA Port Forward voltha-api |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test ${suppressaddsubscriber} |
| END |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countAfterUpgrade}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| Should Be Equal As Strings ${countAfterUpgrade} ${countBeforeUpgrade} |
| # Additional Verification |
| Wait Until Keyword Succeeds ${timeout} 2s Delete All Devices and Verify |
| Setup |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Set up the test suite |
| Common Test Suite Setup |
| Create Voltha Comp Under Test List |
| |
| Teardown Suite |
| [Documentation] Tear down steps for the suite |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Close All ONOS SSH Connections |
| |
| Create Voltha Comp Under Test List |
| [Documentation] Creates a list of Voltha Components to Test from the input variable string |
| ... The input string is expected to be in format: |
| ... <comp-label>,<comp-container>,<comp-image>*<comp-label>,<comp-container>,<comp-image>* |
| ${list_voltha_comps_under_test} Create List |
| @{comps_under_test_arr}= Split String ${voltha_comps_under_test} * |
| ${num_comps_under_test}= Get Length ${comps_under_test_arr} |
| FOR ${I} IN RANGE 0 ${num_comps_under_test}-1 |
| @{comp_under_test_arr}= Split String ${comps_under_test_arr[${I}]} , |
| ${label}= Set Variable ${comp_under_test_arr[0]} |
| ${container}= Set Variable ${comp_under_test_arr[1]} |
| ${image}= Set Variable ${comp_under_test_arr[2]} |
| ${comp_under_test} Create Dictionary label ${label} container ${container} image ${image} |
| Append To List ${list_voltha_comps_under_test} ${comp_under_test} |
| END |
| Log ${list_voltha_comps_under_test} |
| Set Suite Variable ${list_voltha_comps_under_test} |