| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # vgc common functions |
| |
| *** Settings *** |
| Documentation Library for various utilities |
| Library SSHLibrary |
| Library String |
| Library DateTime |
| Library Process |
| Library Collections |
| Library RequestsLibrary |
| Library OperatingSystem |
| |
| *** Variables *** |
| @{connection_list} |
| ${alias} VGC_SSH |
| ${ssh_read_timeout} 60s |
| ${ssh_prompt} karaf@root > |
| ${ssh_regexp_prompt} REGEXP:k.*a.*r.*a.*f.*@.*r.*o.*o.*t.* .*>.* |
| ${regexp_prompt} (?ms)(.*)k(.*)a(.*)r(.*)a(.*)f(.*)@(.*)r(.*)o(.*)o(.*)t(.*) (.*)>(.*) |
| ${ssh_width} 400 |
| ${disable_highlighter} setopt disable-highlighter |
| # ${keep_alive_interval} is set to 0s means sending the keepalive packet is disabled! |
| ${keep_alive_interval} 0s |
| ${INFRA_DT_NAMESPACE} infra |
| |
| |
| *** Keywords *** |
| Create VGC Session |
| [Documentation] Creates a VGC session |
| Create Session VGC http://${VGC_REST_IP}:${VGC_REST_PORT}/vgc/v1 |
| |
| Validate OLT Device in VGC |
| # FIXME use volt-olts to check that the OLT is VGC |
| [Arguments] ${serial_number} |
| [Documentation] Checks if olt has been connected to VGC |
| Create VGC Session |
| ${resp}= Get Request VGC devices |
| Log ${resp} |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['devices']} No devices data found in VGC |
| ${length}= Get Length ${jsondata['devices']} |
| @{serial_numbers}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['devices']} ${INDEX} |
| ${of_id}= Get From Dictionary ${value} id |
| ${sn}= Get From Dictionary ${value} serial |
| ${matched}= Set Variable If '${sn}' == '${serial_number}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for ${serial_number} found |
| [Return] ${of_id} |
| |
| |
| |
| Validate Deleted Device Cleanup In VGC |
| [Arguments] ${ip} ${port} ${olt_serial_number} ${olt_of_id} ${maclearning_enabled}=False |
| [Documentation] The keyword verifies that ports, flows, meters, subscribers, dhcp are all cleared in VGC |
| # Verify Ports are Removed |
| ${ports}= Get Request VGC devices/ports |
| ${port_json_resp}= To Json ${ports.content} |
| Should Not Contain ${port_json_resp} ${olt_of_id} Ports have not been removed from VGC after cleanup |
| # Verify Subscribers are Removed |
| ${sub}= Get Request VGC programmed-subscribers |
| ${sub_json_resp}= To Json ${sub.content} |
| Should Not Contain ${sub_json_resp} ${olt_of_id} Subscriber have not been removed from VGC after cleanup |
| # Verify Flows are Removed |
| ${flows}= Get Request VGC flows |
| ${flow_json_resp}= To Json ${flows.content} |
| Should Not Contain ${flow_json_resp} ${olt_of_id} Flows have not been removed from VGC after cleanup |
| # Verify Meters are Removed |
| ${meter}= Get Request VGC meters |
| ${meter_json_resp}= To Json ${meter.content} |
| Should Not Contain ${meter_json_resp} ${olt_of_id} Meter have not been removed from VGC after cleanup |
| # Verify AAA-Users are Removed |
| # ${aaa}= Execute ONOS CLI Command use single connection ${ip} ${port} |
| #... aaa-users ${olt_of_id} |
| # ${aaa_count}= Get Line Count ${aaa} |
| #Should Be Equal As Integers ${aaa_count} 0 AAA Users have not been removed from ONOS after cleanup |
| # Verify Dhcp-Allocations are Removed |
| ${dhcp}= Get Request VGC allocations/${olt_of_id} |
| ${dhcp_json_resp}= To Json ${dhcp.content} |
| ${dhcp_count} = Get Length ${dhcp_json_resp} |
| #Should Be Equal ${dhcp_json_resp} ${None} DHCP Allocations have not been removed from VGC after cleanup |
| Should Be Equal As Integers ${dhcp_count} 0 DHCP Allocations have not been removed from VGC after cleanup |
| # Verify MAC Learner Mappings are Removed |
| # ${mac}= Run Keyword If ${maclearning_enabled} Execute ONOS CLI Command use single connection ${ip} ${port} |
| # ... mac-learner-get-mapping | grep -v INFO |
| # ${mac_count}= Run Keyword If ${maclearning_enabled} Get Line Count ${mac} |
| # ... ELSE Set Variable 0 |
| # Should Be Equal As Integers ${mac_count} 0 Client MAC Learner Mappings have not been removed from ONOS after cleanup |
| |
| |
| Get NNI Port in VGC |
| [Arguments] ${olt_of_id} |
| [Documentation] Retrieves NNI port for the OLT in VGC |
| ${resp}= Get Request VGC devices/${olt_of_id}/ports |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['ports']} No ports data found for OLT ${olt_of_id} in VGC |
| ${length}= Get Length ${jsondata['ports']} |
| @{ports}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['ports']} ${INDEX} |
| ${annotations}= Get From Dictionary ${value} annotations |
| ${nni_port}= Get From Dictionary ${value} port |
| ${nniPortName}= Catenate SEPARATOR= nni- ${nni_port} |
| ${portName}= Get From Dictionary ${annotations} portName |
| ${matched}= Set Variable If '${portName}' == '${nniPortName}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for NNI found for ${olt_of_id} |
| [Return] ${nni_port} |
| |
| |
| |
| Get ONU Port in VGC |
| [Arguments] ${onu_serial_number} ${olt_of_id} ${onu_uni_id}=1 |
| [Documentation] Retrieves ONU port for the ONU in VGC |
| ${onu_serial_number}= Catenate SEPARATOR=- ${onu_serial_number} ${onu_uni_id} |
| ${resp}= Get Request VGC devices/${olt_of_id}/ports |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['ports']} No ports data found for OLT ${olt_of_id} in VGC |
| ${length}= Get Length ${jsondata['ports']} |
| @{ports}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['ports']} ${INDEX} |
| ${annotations}= Get From Dictionary ${value} annotations |
| ${onu_port}= Get From Dictionary ${value} port |
| ${portName}= Get From Dictionary ${annotations} portName |
| ${matched}= Set Variable If '${portName}' == '${onu_serial_number}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for ${onu_serial_number} found |
| [Return] ${onu_port} |
| |
| |
| |
| Verify UNI Port Is Enabled |
| [Arguments] ${onu_name} ${onu_uni_id}=1 |
| [Documentation] Verifies if the ONU's UNI port is enabled in VGC |
| ${onu_serial_number}= Catenate SEPARATOR=- ${onu_name} ${onu_uni_id} |
| ${resp}= Get Request VGC devices/ports |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['ports']} No devices ports data in VGC |
| ${length}= Get Length ${jsondata['ports']} |
| @{ports}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['ports']} ${INDEX} |
| ${annotations}= Get From Dictionary ${value} annotations |
| ${onu_port}= Get From Dictionary ${value} port |
| ${portName}= Get From Dictionary ${annotations} portName |
| ${portstatus}= Get From Dictionary ${value} isEnabled |
| ${matched}= Set Variable If '${portName}' == '${onu_serial_number}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for ${onu_serial_number} found |
| Should be Equal ${portstatus} ${True} |
| |
| |
| Verify UNI Port Is Disabled |
| [Arguments] ${ip} ${port} ${onu_name} ${onu_uni_id}=1 |
| [Documentation] Verifies if the ONU's UNI port is enabled in VGC |
| ${onu_serial_number}= Catenate SEPARATOR=- ${onu_name} ${onu_uni_id} |
| ${resp}= Get Request VGC devices/ports |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['ports']} No devices ports data in VGC |
| ${length}= Get Length ${jsondata['ports']} |
| @{ports}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['ports']} ${INDEX} |
| ${annotations}= Get From Dictionary ${value} annotations |
| ${onu_port}= Get From Dictionary ${value} port |
| ${portName}= Get From Dictionary ${annotations} portName |
| ${portstatus}= Get From Dictionary ${value} isEnabled |
| ${matched}= Set Variable If '${portName}' == '${onu_serial_number}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for ${onu_serial_number} found |
| Should be Equal ${portstatus} ${False} |
| |
| Close All VGC SSH Connections |
| [Documentation] Close all VGC Connection and clear connection list. |
| SSHLibrary.Close All Connections |
| @{connection_list} Create List |
| |
| |
| |
| Verify Subscriber Access Flows Added For ONU DT in VGC |
| [Arguments] ${ip} ${port} ${olt_of_id} ${onu_port} ${nni_port} ${s_tag} |
| [Documentation] Verifies if the Subscriber Access Flows are added in VGC for the ONU |
| # Get all flows from VGC |
| ${resp}= Get Request VGC flows/${olt_of_id} |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['flows']} No flows data found for OLT ${olt_of_id} in VGC |
| # Verify upstream table=0 flow |
| ${length}= Get Length ${jsondata['flows']} |
| @{flows}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${tableid}= Get Table Id From Flow ${flow} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${matched}= Set Variable If |
| ... '${tableid}' == '0' and '${inport}' == '${onu_port}' and '${vlanvid}' == '4096' and '${outport}' == '1' |
| ... True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for upstream table 0 flow found |
| # Verify upstream table=1 flow |
| ${matched1}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${subtype}= Get Subtype From Flow ${flow} |
| ${vlanid}= Get Vlan Id From Flow ${flow} |
| ${res1}= Evaluate '${inport}' == '${onu_port}' |
| ${res2}= Evaluate '${vlanvid}' == '4096' and '${outport}' == '${nni_port}' |
| ${res3}= Evaluate '${subtype}' == 'VLAN_PUSH' and '${vlanid}' == '${s_tag}' |
| ${matched1}= Set Variable If ${res1} and ${res2} and ${res3} True False |
| Exit For Loop If ${matched1} |
| END |
| Should Be True ${matched1} No match for upstream table 1 flow found |
| # Verify downstream table=0 flow |
| ${matched2}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${subtype}= Get Subtype From Flow ${flow} |
| ${res1}= Evaluate '${inport}' == '${nni_port}' |
| ${res2}= Evaluate '${vlanvid}' == '${s_tag}' and '${outport}' == '1' |
| ${res3}= Evaluate '${subtype}' == 'VLAN_POP' |
| ${matched2}= Set Variable If ${res1} and ${res2} and ${res3} True False |
| Exit For Loop If ${matched2} |
| END |
| Should Be True ${matched2} No match for downstream table 0 flow found |
| # Verify downstream table=1 flow |
| ${matched3}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${matched3}= Set Variable If |
| ... '${inport}' == '${nni_port}' and '${vlanvid}' == '4096' and '${outport}' == '${onu_port}' |
| ... True False |
| Exit For Loop If ${matched3} |
| END |
| Should Be True ${matched3} "No match for downstream table 1 flow found" |
| |
| Verify Subscriber Access Flows Added for DT FTTB |
| [Arguments] ${olt_of_id} ${onu_port} ${nni_port} ${s_tag} ${c_tag} |
| [Documentation] Verifies if the Subscriber Access Flows are added in ONOS for the ONU |
| # Get all flows from VGC |
| ${resp}= Get Request VGC flows/${olt_of_id} |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['flows']} No ports data found for OLT ${olt_of_id} in VGC |
| # Upstream |
| # ONU |
| ${length}= Get Length ${jsondata['flows']} |
| @{flows}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${tableid}= Get Table Id From Flow ${flow} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${matched}= Set Variable If |
| ... '${inport}' == '${onu_port}' and '${vlanvid}' == '${c_tag}' and '${outport}' == '1' |
| ... True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for upstream ONU flow found |
| # OLT |
| ${matched1}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${vlanid}= Get Vlan Id From Flow For Fttb ${flow} |
| ${res1}= Evaluate '${inport}' == '${onu_port}' |
| ${res2}= Evaluate '${vlanvid}' == '${c_tag}' and '${vlanid}' == '${s_tag}' |
| ${res3}= Evaluate '${outport}' == '${nni_port}' |
| ${matched1}= Set Variable If ${res1} and ${res2} and ${res3} True False |
| Exit For Loop If ${matched1} |
| END |
| Should Be True ${matched1} No match for upstream OLT found |
| # Downstream |
| # OLT |
| ${matched2}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${vlanid}= Get Vlan Id From Flow For Fttb ${flow} |
| ${res1}= Evaluate '${inport}' == '${nni_port}' |
| ${res2}= Evaluate '${vlanvid}' == '${s_tag}' and '${vlanid}' == '${c_tag}' |
| ${res3}= Evaluate '${outport}' == '1' |
| ${matched2}= Set Variable If ${res1} and ${res2} and ${res3} True False |
| Exit For Loop If ${matched2} |
| END |
| Should Be True ${matched2} No match for downstream OLT found |
| # ONU |
| ${matched3}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${tableid}= Get Table Id From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${vlanid}= Get Vlan Id From Flow For Fttb ${flow} |
| ${res1}= Evaluate '${inport}' == '${nni_port}' |
| ${res2}= Evaluate '${vlanvid}' == '${c_tag}' and '${outport}' == '${onu_port}' |
| ${matched3}= Set Variable If ${res1} and ${res2} True False |
| Exit For Loop If ${matched3} |
| END |
| Should Be True ${matched3} No match for downstream ONU found |
| |
| Verify DPU MGMT Flows Added for DT FTTB |
| [Arguments] ${olt_of_id} ${onu_port} ${nni_port} ${s_tag} ${c_tag} |
| [Documentation] Verifies if the DPU MGMT Flows are added in VGC for the ONU |
| # Get all flows from VGC |
| ${resp}= Get Request VGC flows/${olt_of_id} |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['flows']} No ports data found for OLT ${olt_of_id} in VGC |
| # Upstream |
| # ONU |
| ${length}= Get Length ${jsondata['flows']} |
| @{flows}= Create List |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${tableid}= Get Table Id From Flow ${flow} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${vlanid}= Get Vlan Id From Flow For Fttb ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${res1}= Evaluate '${inport}' == '${onu_port}' |
| ${res2}= Evaluate '${vlanvid}' == '${c_tag}' and '${vlanid}' == '${s_tag}' |
| ${res3}= Evaluate '${outport}' == '1' |
| ${matched}= Set Variable If ${res1} and ${res2} and ${res3} True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for upstream ONU flow found |
| # OLT |
| ${matched1}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${vlanid}= Get Vlan Id From Flow For Fttb ${flow} |
| ${matched1}= Set Variable If |
| ... '${inport}' == '${onu_port}' and '${vlanvid}' == '${s_tag}' and '${outport}' == '${nni_port}' |
| ... True False |
| ${matched1}= Set Variable If ${res1} and ${res2} and ${res3} True False |
| Log To Console "bbb",'${inport}' == '${onu_port}' '${vlanvid}' == '${s_tag}' '${outport}' == '${nni_port}' |
| Exit For Loop If ${matched1} |
| END |
| Should Be True ${matched1} No match for upstream OLT found |
| # Downstream |
| # OLT |
| ${matched2}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${vlanid}= Get Vlan Id From Flow For Fttb ${flow} |
| ${matched3}= Set Variable If |
| ... '${inport}' == '${nni_port}' and '${vlanvid}' == '${s_tag}' and '${outport}' == '1' |
| ... True False |
| Exit For Loop If ${matched3} |
| END |
| Should Be True ${matched3} No match for downstream OLT found |
| # ONU |
| ${matched4}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${vlanvid}= Get Vlan VId From Flow ${flow} |
| ${tableid}= Get Table Id From Flow ${flow} |
| ${outport}= Get Out Port From Flow ${flow} |
| ${vlanid}= Get Vlan Id From Flow For Fttb ${flow} |
| ${res1}= Evaluate '${inport}' == '${nni_port}' |
| ${res2}= Evaluate '${vlanvid}' == '${s_tag}' and '${vlanid}' == '${c_tag}' |
| ${res3}= Evaluate '${outport}' == '${onu_port}' |
| ${matched4}= Set Variable If ${res1} and ${res2} and ${res3} True False |
| Exit For Loop If ${matched4} |
| END |
| Should Be True ${matched4} No match for downstream ONU found |
| |
| Verify VGC Flows Added for DT FTTB |
| [Arguments] ${olt_of_id} ${onu_port} ${nni_port} ${service} |
| [Documentation] Verifies if the Flows are added in ONOS for the ONU |
| ${num_services}= Get Length ${service} |
| FOR ${I} IN RANGE 0 ${num_services} |
| ${service_name}= Set Variable ${service[${I}]['name']} |
| ${stag}= Set Variable ${service[${I}]['s_tag']} |
| ${ctag}= Set Variable ${service[${I}]['c_tag']} |
| Run Keyword If '${service_name}' == 'FTTB_SUBSCRIBER_TRAFFIC' |
| ... Verify Subscriber Access Flows Added for DT FTTB ${olt_of_id} |
| ... ${onu_port} ${nni_port} ${stag} ${ctag} |
| ... Verify DPU MGMT Flows Added for DT FTTB ${olt_of_id} |
| ... ${onu_port} ${nni_port} ${stag} ${ctag} |
| END |
| |
| |
| Add Subscriber Details |
| [Documentation] Adds a particular subscriber |
| [Arguments] ${of_id} ${onu_port} |
| ${resp}= Post Request VGC services/${of_id}/${onu_port} |
| Log ${resp} |
| Should Be Equal As Strings ${resp.status_code} 200 |
| |
| Remove Subscriber Access |
| [Documentation] Removes a particular subscriber |
| [Arguments] ${of_id} ${onu_port} |
| ${resp}= Delete Request VGC services/${of_id}/${onu_port} |
| Log ${resp} |
| Should Be Equal As Strings ${resp.status_code} 200 |
| |
| Send File To VGC |
| [Documentation] Send the content of the file to VGC to selected section of configuration |
| ... using Post Request |
| [Arguments] ${CONFIG_FILE} #${section}=${EMPTY} |
| ${Headers}= Create Dictionary Content-Type application/json |
| ${File_Data}= OperatingSystem.Get File ${CONFIG_FILE} |
| Log ${Headers} |
| Log ${File_Data} |
| ${resp}= Post Request VGC |
| ... network/configurations headers=${Headers} data=${File_Data} |
| Should Be Equal As Strings ${resp.status_code} 200 |
| |
| Verify No Pending Flows For ONU |
| [Arguments] ${ip} ${port} ${onu_port} |
| [Documentation] Verifies that there are no flows "PENDING" state for the ONU in VGC |
| ${resp}= Get Request VGC flows/pending |
| ${jsondata}= To Json ${resp.content} |
| ${length}= Get Length ${jsondata['flows']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${flow}= Get From List ${jsondata['flows']} ${INDEX} |
| ${inport}= Get In Port From Flow ${flow} |
| ${matched}= Run Keyword If '${inport}' == '${onu_port}' Set Variable ${TRUE} |
| Exit For Loop If ${matched} |
| END |
| Should Be Equal ${matched} False No match for pending flow found |
| |
| Get Pending Flow Count |
| [Documentation] Get the count for flows "PENDING" state for the ONU in VGC |
| ${resp}= Get Request VGC flows/pending |
| ${jsondata}= To Json ${resp.content} |
| ${length}= Get Length ${jsondata['flows']} |
| [Return] ${length} |
| |
| Get In Port From Flow |
| [Documentation] Fetches the port Record for IN_PORT |
| [Arguments] ${flow} |
| ${selector}= Get From Dictionary ${flow} selector |
| ${len}= Get Length ${selector['criteria']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${len} |
| ${criteria}= Get From List ${selector['criteria']} ${INDEX} |
| ${type}= Get From Dictionary ${criteria} type |
| ${port}= Run Keyword If '${type}' == 'IN_PORT' Get From Dictionary ${criteria} port |
| ${matched}= Set Variable If '${type}' == 'IN_PORT' True False |
| Exit For Loop If ${matched} |
| END |
| [Return] ${port} |
| |
| |
| |
| Get Vlan VId From Flow |
| [Documentation] Fetches the vlan Id |
| [Arguments] ${flow} |
| ${selector}= Get From Dictionary ${flow} selector |
| ${len}= Get Length ${selector['criteria']} |
| ${matched}= Set Variable False |
| ${vlanid}= Set Variable |
| FOR ${INDEX} IN RANGE 0 ${len} |
| ${criteria}= Get From List ${selector['criteria']} ${INDEX} |
| ${type}= Get From Dictionary ${criteria} type |
| ${vlanid}= Run Keyword If '${type}' == 'VLAN_VID' Get From Dictionary ${criteria} vlanId |
| ${matched}= Set Variable If '${type}' == 'VLAN_VID' True False |
| Exit For Loop If ${matched} |
| END |
| [Return] ${vlanid} |
| |
| |
| Get Out Port From Flow |
| [Documentation] Fetches the port for OUTPUT |
| [Arguments] ${flow} |
| ${treatment}= Get From Dictionary ${flow} treatment |
| ${len}= Get Length ${treatment['instructions']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${len} |
| ${instructions}= Get From List ${treatment['instructions']} ${INDEX} |
| ${type}= Get From Dictionary ${instructions} type |
| ${outport}= Run Keyword If '${type}' == 'OUTPUT' Get From Dictionary ${instructions} port |
| ${matched}= Set Variable If '${type}' == 'OUTPUT' True False |
| Exit For Loop If ${matched} |
| END |
| [Return] ${outport} |
| |
| |
| Get Subtype From Flow |
| [Documentation] Fetches the L2MODIFICATION subtype |
| [Arguments] ${flow} |
| ${treatment}= Get From Dictionary ${flow} treatment |
| ${len}= Get Length ${treatment['instructions']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${len} |
| ${instructions}= Get From List ${treatment['instructions']} ${INDEX} |
| ${type}= Get From Dictionary ${instructions} type |
| ${subtype}= Run Keyword If '${type}' == 'L2MODIFICATION' Get From Dictionary ${instructions} subtype |
| ${matched}= Set Variable If '${type}' == 'L2MODIFICATION' True False |
| Exit For Loop If ${matched} |
| END |
| [Return] ${subtype} |
| |
| Get Vlan Id From Flow For Fttb |
| [Documentation] Fetch the VLAN id for L2MODIFICATION |
| [Arguments] ${flow} |
| ${treatment}= Get From Dictionary ${flow} treatment |
| ${len}= Get Length ${treatment['instructions']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${len} |
| ${instructions}= Get From List ${treatment['instructions']} ${INDEX} |
| ${type}= Get From Dictionary ${instructions} type |
| ${subtype}= Run Keyword If '${type}' == 'L2MODIFICATION' Get From Dictionary ${instructions} subtype |
| ${vlanId}= Run Keyword If '${type}' == 'L2MODIFICATION' and '${subtype}' == 'VLAN_SET' |
| ... Get From Dictionary ${instructions} vlanId |
| ${matched}= Set Variable If '${type}' == 'L2MODIFICATION' and '${subtype}' == 'VLAN_SET' True False |
| Exit For Loop If ${matched} |
| END |
| [Return] ${vlanId} |
| |
| Get Table Id From Flow |
| [Documentation] Fetch the TableId |
| [Arguments] ${flow} |
| ${tableid}= Get From Dictionary ${flow} tableId |
| [Return] ${tableid} |
| |
| Get Vlan Id From Flow |
| [Documentation] Fetch the VLAN id for L2MODIFICATION |
| [Arguments] ${flow} |
| ${treatment}= Get From Dictionary ${flow} treatment |
| ${len}= Get Length ${treatment['instructions']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${len} |
| ${instructions}= Get From List ${treatment['instructions']} ${INDEX} |
| ${type}= Get From Dictionary ${instructions} type |
| ${subtype}= Run Keyword If '${type}' == 'L2MODIFICATION' Get From Dictionary ${instructions} subtype |
| ${vlanId}= Run Keyword If '${type}' == 'L2MODIFICATION' and '${subtype}' == 'VLAN_ID' |
| ... Get From Dictionary ${instructions} vlanId |
| ${matched}= Set Variable If '${type}' == 'L2MODIFICATION' and '${subtype}' == 'VLAN_ID' True False |
| Exit For Loop If ${matched} |
| END |
| [Return] ${vlanId} |
| |
| Get Subscribers for a Particular Service |
| [Documentation] Filters the subscriber for a particular service |
| [Arguments] ${olt_of_id} ${subscriber_json} ${filter} |
| ${subscribers_info}= Get From Dictionary ${subscriber_json} subscribers |
| ${num_subscribers}= Get Length ${subscribers_info} |
| ${subscriber_list} Create List |
| Return From Keyword If '${filter}' == '${EMPTY}' ${subscribers_info} |
| FOR ${INDEX} IN RANGE 0 ${num_subscribers} |
| ${subscriber}= Get From List ${subscribers_info} ${INDEX} |
| ${res1}= Evaluate '${olt_of_id}' == '${subscriber["location"]}' |
| ${tag_subscriber_info}= Get From Dictionary ${subscriber} tagInfo |
| ${ServiceName}= Get From Dictionary ${tag_subscriber_info} serviceName |
| ${res2}= Evaluate '${filter}' == '${ServiceName}' |
| Run Keyword If ${res1} and ${res2} |
| ... Append To List ${subscriber_list} ${subscriber} |
| ${matched}= Set Variable If ${res1} and ${res2} True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No matching subscriber for OLT |
| [Return] ${subscriber_list} |
| |
| Get Programmed Subscribers |
| [Arguments] ${olt_of_id} ${onu_port} ${filter}=${EMPTY} |
| [Documentation] Retrieves the subscriber details at a given location |
| ${programmed_sub}= Get Request VGC programmed-subscribers |
| ${programmed_sub_json_resp}= To Json ${programmed_sub.content} |
| ${filtered_subscriber_list}= Get Subscribers for a Particular Service ${olt_of_id} ${programmed_sub_json_resp} |
| ... ${filter} |
| [Return] ${filtered_subscriber_list} |
| |
| Verify Programmed Subscribers DT FTTB |
| [Arguments] ${olt_of_id} ${onu_port} ${service} |
| [Documentation] Verifies the subscriber is present at a given location |
| ${num_services}= Get Length ${service} |
| FOR ${I} IN RANGE 0 ${num_services} |
| ${service_name}= Set Variable ${service[${I}]['name']} |
| ${programmed_subscriber}= Get Programmed Subscribers ${olt_of_id} ${onu_port} |
| ... ${service_name} |
| Log ${programmed_subscriber} |
| Should Not Be Empty ${programmed_subscriber} No programmed subscribers found for ${service_name} |
| END |
| |
| Verify Meters in VGC Ietf |
| [Arguments] ${ip} ${port} ${olt_of_id} ${onu_port} ${filter}=${EMPTY} |
| [Documentation] Verifies the meters with BW Ietf format (currently, DT workflow uses this format) |
| ${programmed_sub_json_resp}= Get Programmed Subscribers ${olt_of_id} ${onu_port} |
| ... ${filter} |
| Log ${programmed_sub_json_resp} |
| ${us_bw_profile} ${ds_bw_profile} Get Upstream and Downstream Bandwidth Profile Name |
| ... ${programmed_sub_json_resp} |
| # Get upstream bandwidth profile details |
| ${us_cir} ${us_cbs} ${us_pir} ${us_pbs} ${us_gir} Get Bandwidth Profile Details Ietf Rest |
| ... ${us_bw_profile} |
| # Verify meter for upstream bandwidth profile |
| ${meter}= Get Request VGC meters |
| ${meter_json_resp}= To Json ${meter.content} |
| Log ${meter_json_resp} |
| ${rate} ${burst_size} Get Meter Param In Details |
| ... ${meter_json_resp} 1 |
| Log ${rate} |
| Log ${burst_size} |
| # for cir & cbs |
| ${matched}= Set Variable If '${rate}' == '${us_cir}' and '${burst_size}' == '${us_cbs}' True False |
| Should Be True ${matched} |
| ${res1}= Evaluate '${rate}' == '${us_cir}' and '${burst_size}' == '${us_cbs}' |
| #for pir & pbs |
| ${rate} ${burst_size} Get Meter Param In Details |
| ... ${meter_json_resp} 2 |
| ${matched}= Set Variable If '${rate}' == '${us_pir}' and '${burst_size}' == '${us_pbs}' True False |
| Should Be True ${matched} |
| ${res2}= Evaluate '${rate}' == '${us_pir}' and '${burst_size}' == '${us_pbs}' |
| #for gir |
| Run Keyword if ${us_gir} != 0 Validate Guarenteed Information Rate ${us_gir} ${meter_json_resp} |
| # Get downstream bandwidth profile details |
| ${ds_cir} ${ds_cbs} ${ds_pir} ${ds_pbs} ${ds_gir} Get Bandwidth Profile Details Ietf Rest |
| ... ${ds_bw_profile} |
| # Verify meter for downstream bandwidth profile |
| ${meter}= Get Request VGC meters |
| ${meter_json_resp}= To Json ${meter.content} |
| Log ${meter_json_resp} |
| ${rate} ${burst_size} Get Meter Param In Details |
| ... ${meter_json_resp} 1 |
| Log ${rate} |
| Log ${burst_size} |
| # for cir & cbs |
| ${matched}= Set Variable If '${rate}' == '${ds_cir}' and '${burst_size}' == '${ds_cbs}' True False |
| Should Be True ${matched} |
| #for pir & pbs |
| ${rate} ${burst_size} Get Meter Param In Details |
| ... ${meter_json_resp} 2 |
| ${matched}= Set Variable If '${rate}' == '${ds_pir}' and '${burst_size}' == '${ds_pbs}' True False |
| Should Be True ${matched} |
| #for gir |
| Run Keyword If ${ds_gir} != 0 |
| ... Validate Guarenteed Information Rate ${ds_gir} ${meter_json_resp} |
| |
| Validate Guarenteed Information Rate |
| [Documentation] Validate gir for both upstream and downstream meters |
| [Arguments] ${gir} ${meter_json_resp} |
| ${rate} ${burst_size} Get Meter Param In Details |
| ... ${meter_json_resp} 3 |
| ${matched}= Set Variable If '${rate}' == '${gir}' and '${burst_size}' == '0' True False |
| Should Be True ${matched} |
| [Return] ${matched} |
| |
| Get Bandwidth Profile Details Ietf Rest |
| [Arguments] ${bw_profile_id} |
| [Documentation] Retrieves the details of the given Ietf standard based bandwidth profile using REST API |
| ${bw_profile_id}= Remove String ${bw_profile_id} ' " |
| ${resp}= Get Request VGC profiles/${bw_profile_id} |
| Log ${resp} |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata} Could not find data for bandwidth profile ${bw_profile_id} in VGC |
| ${matched}= Set Variable False |
| ${bw_id}= Get From Dictionary ${jsondata} id |
| ${matched}= Set Variable If '${bw_id}' == '${bw_profile_id}' True False |
| ${pir}= Get From Dictionary ${jsondata} pir |
| ${pbs}= Get From Dictionary ${jsondata} pbs |
| ${cir}= Get From Dictionary ${jsondata} cir |
| ${cbs}= Get From Dictionary ${jsondata} cbs |
| ${gir}= Get From Dictionary ${jsondata} gir |
| Should Be True ${matched} No bandwidth profile found for id: ${bw_profile_id} |
| [Return] ${cir} ${cbs} ${pir} ${pbs} ${gir} |
| |
| |
| Get Upstream and Downstream Bandwidth Profile Name |
| [Arguments] ${programmed_sub} |
| [Documentation] Retrieves the upstream and downstream bandwidth profile name |
| ... from the programmed subscriber |
| ${length}= Get Length ${programmed_sub} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${programmed_sub} ${INDEX} |
| ${tagInfo_id}= Get From Dictionary ${value} tagInfo |
| Log ${tagInfo_id} |
| ${us_bw_profile}= Get From Dictionary ${tagInfo_id} upstreamBandwidthProfile |
| Log ${us_bw_profile} |
| ${ds_bw_profile}= Get From Dictionary ${tagInfo_id} downstreamBandwidthProfile |
| Log ${ds_bw_profile} |
| END |
| [Return] ${us_bw_profile} ${ds_bw_profile} |
| |
| Verify Subscriber Access Flows Added Count DT |
| [Arguments] ${ip} ${port} ${olt_of_id} ${expected_flows} |
| [Documentation] Matches for total number of subscriber access flows added for all onus |
| ${resp}= Get Request VGC flows/${olt_of_id} |
| ${jsondata}= To Json ${resp.content} |
| ${access_flows_added_count}= Get Length ${jsondata['flows']} |
| Should Be Equal As Integers ${access_flows_added_count} ${expected_flows} |
| |
| Get Meter Param In Details |
| [Arguments] ${meter_json} ${length} |
| [Documentation] Retrieves the meter rate state burst-size |
| ${metername}= Get From Dictionary ${meter_json} meters |
| Log ${metername} |
| ${value}= Get From List ${metername} 0 |
| ${bands_info}= Get From Dictionary ${value} bands |
| Log ${bands_info} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${bands_info} ${INDEX} |
| ${burst_size}= Get From Dictionary ${value} burstSize |
| ${rate}= Get From Dictionary ${value} rate |
| END |
| [Return] ${rate} ${burst_size} |
| |
| Delete Subscribers And BW Profile In VGC |
| [Documentation] Delete Subscribers and bw profile In VGC |
| Create VGC Session |
| ${resp}= Get Request VGC programmed-subscribers |
| Log ${resp} |
| ${jsondata}= To Json ${resp.content} |
| ${length}= Get Length ${jsondata['subscribers']} |
| @{serial_numbers}= Create List |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['subscribers']} ${INDEX} |
| ${taginfo}= Get From Dictionary ${value} tagInfo |
| ${service_id}= Get From Dictionary ${taginfo} serviceName |
| ${upstream_bw_id}= Get From Dictionary ${taginfo} upstreamBandwidthProfile |
| ${downstream_bw_id}= Get From Dictionary ${taginfo} downstreamBandwidthProfile |
| Delete Request VGC subscribers/${service_id} |
| Delete Request VGC profiles/${upstream_bw_id} |
| Delete Request VGC profiles/${downstream_bw_id} |
| END |
| |
| Deactivate Subscribers In VGC |
| [Documentation] Deactivate Subscribers In VGC |
| Create VGC Session |
| ${resp}= Get Request VGC devices/ports |
| Log ${resp} |
| ${jsondata}= To Json ${resp.content} |
| ${length}= Get Length ${jsondata['ports']} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['ports']} ${INDEX} |
| ${annotations}= Get From Dictionary ${value} annotations |
| ${portname}= Get From Dictionary ${annotations} portName |
| Delete Request VGC services/${portname} |
| END |
| |
| Verify Device Flows Removed |
| [Arguments] ${ip} ${port} ${olt_of_id} |
| [Documentation] Verifies all flows are removed from the device |
| ${resp}= Get Request VGC flows/${olt_of_id} |
| ${jsondata}= To Json ${resp.content} |
| ${flow_count}= Get Length ${jsondata['flows']} |
| Should Be Equal As Integers ${flow_count} 0 Flows not removed |
| |
| Device Is Available In VGC |
| [Arguments] ${olt_of_id} ${available}=true |
| [Documentation] Validates the device exists and it has the expected availability in VGC |
| ${resp}= Get Request VGC devices |
| ${jsondata}= To Json ${resp.content} |
| Should Not Be Empty ${jsondata['devices']} No devices data found in VGC |
| ${length}= Get Length ${jsondata['devices']} |
| ${matched}= Set Variable False |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata['devices']} ${INDEX} |
| ${of_id}= Get From Dictionary ${value} id |
| ${availability}= Get From Dictionary ${value} available |
| Log ${olt_of_id} |
| Log ${of_id} |
| ${matched}= Set Variable If '${of_id}' == '${olt_of_id}' and '${available}' == '${availability}' True False |
| Exit For Loop If ${matched} |
| END |
| Should Be True ${matched} No match for '${olt_of_id}' found |
| Should Be Equal ${available} ${availability} |
| |