| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # voltctl common functions |
| |
| *** Settings *** |
| Documentation Library for various utilities |
| Library SSHLibrary |
| Library HttpLibrary.HTTP |
| Library String |
| Library DateTime |
| Library Process |
| Library Collections |
| Library RequestsLibrary |
| Library OperatingSystem |
| |
| *** Keywords *** |
| Test Empty Device List |
| [Documentation] Verify that there are no devices in the system |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| Should Be Equal As Integers ${length} 0 |
| |
| Create Device |
| [Arguments] ${ip} ${port} |
| [Documentation] Creates a device in VOLTHA |
| #create/preprovision device |
| ${rc} ${device_id}= Run and Return Rc and Output |
| ... ${VOLTCTL_CONFIG}; voltctl device create -t openolt -H ${ip}:${port} |
| Should Be Equal As Integers ${rc} 0 |
| [Return] ${device_id} |
| |
| Enable Device |
| [Arguments] ${device_id} |
| [Documentation] Enables a device in VOLTHA |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device enable ${device_id} |
| Should Be Equal As Integers ${rc} 0 |
| |
| Disable Device |
| [Arguments] ${device_id} |
| [Documentation] Enables a device in VOLTHA |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${device_id} |
| Should Be Equal As Integers ${rc} 0 |
| |
| Disable Devices In Voltha |
| [Documentation] Disables all the known devices in voltha |
| [Arguments] ${filter} |
| ${arg}= Set Variable ${EMPTY} |
| ${arg}= Run Keyword If len('${filter}'.strip()) != 0 Set Variable --filter ${filter} |
| ${rc} ${devices}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list ${arg} --orderby Root -q | xargs echo -n |
| Should Be Equal As Integers ${rc} 0 |
| ${rc} ${output}= Run Keyword If len('${devices}') != 0 Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${devices} |
| Run Keyword If len('${devices}') != 0 Should Be Equal As Integers ${rc} 0 |
| |
| Test Devices Disabled In Voltha |
| [Documentation] Tests to verify that all devices in VOLTHA are disabled |
| [Arguments] ${filter} |
| ${rc} ${count}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list --filter '${filter},AdminState!=DISABLED' -q | wc -l |
| Should Be Equal As Integers ${rc} 0 |
| Should Be Equal As Integers ${count} 0 |
| |
| Delete Devices In Voltha |
| [Documentation] Disables all the known devices in voltha |
| [Arguments] ${filter} |
| ${arg}= Set Variable ${EMPTY} |
| ${arg}= Run Keyword If len('${filter}'.strip()) != 0 Set Variable --filter ${filter} |
| ${rc} ${devices}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list ${arg} --orderby Root -q | xargs echo -n |
| Should Be Equal As Integers ${rc} 0 |
| ${rc} ${output}= Run Keyword If len('${devices}') != 0 Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device delete ${devices} |
| Run Keyword If len('${devices}') != 0 Should Be Equal As Integers ${rc} 0 |
| |
| Get Device Flows from Voltha |
| [Arguments] ${device_id} |
| [Documentation] Gets device flows from VOLTHA |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device flows ${device_id} |
| Should Be Equal As Integers ${rc} 0 |
| [Return] ${output} |
| |
| Get Logical Device Output from Voltha |
| [Arguments] ${device_id} |
| [Documentation] Gets logicaldevice flows and ports from VOLTHA |
| ${rc1} ${flows}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl logicaldevice flows ${device_id} |
| ${rc2} ${ports}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl logicaldevice ports ${device_id} |
| Log ${flows} |
| Log ${ports} |
| Should Be Equal As Integers ${rc1} 0 |
| Should Be Equal As Integers ${rc2} 0 |
| |
| Get Device Output from Voltha |
| [Arguments] ${device_id} |
| [Documentation] Gets device flows and ports from VOLTHA |
| ${rc1} ${flows}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device flows ${device_id} |
| ${rc2} ${ports}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device ports ${device_id} |
| Log ${flows} |
| Log ${ports} |
| Should Be Equal As Integers ${rc1} 0 |
| Should Be Equal As Integers ${rc2} 0 |
| |
| Get Device List from Voltha |
| [Documentation] Gets Device List Output from Voltha |
| ${rc1} ${devices}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list |
| Log ${devices} |
| Should Be Equal As Integers ${rc1} 0 |
| |
| Validate Device |
| [Arguments] ${admin_state} ${oper_status} ${connect_status} ${serial_number}=${EMPTY} ${device_id}=${EMPTY} |
| ... ${onu_reason}=${EMPTY} ${onu}=False |
| [Documentation] Parses the output of "voltctl device list" and inspects device ${serial_number} and ${device_id} |
| ... Arguments are matched for device states of: "admin_state", "oper_status", and "connect_status" |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${astate}= Get From Dictionary ${value} adminstate |
| ${opstatus}= Get From Dictionary ${value} operstatus |
| ${cstatus}= Get From Dictionary ${value} connectstatus |
| ${sn}= Get From Dictionary ${value} serialnumber |
| ${devId}= Get From Dictionary ${value} id |
| ${mib_state}= Get From Dictionary ${value} reason |
| Run Keyword If '${sn}' == '${serial_number}' or '${devId}' == '${device_id}' Exit For Loop |
| END |
| Log ${value} |
| Should Be Equal '${astate}' '${admin_state}' Device ${serial_number} admin_state != ${admin_state} |
| ... values=False |
| Should Be Equal '${opstatus}' '${oper_status}' Device ${serial_number} oper_status != ${oper_status} |
| ... values=False |
| Should Be Equal '${cstatus}' '${connect_status}' Device ${serial_number} conn_status != ${connect_status} |
| ... values=False |
| Run Keyword If '${onu}' == 'True' Should Be Equal '${mib_state}' '${onu_reason}' |
| ... Device ${serial_number} mib_state incorrect (${mib_state}) values=False |
| |
| Validate OLT Device |
| [Arguments] ${admin_state} ${oper_status} ${connect_status} ${serial_number}=${EMPTY} |
| ... ${device_id}=${EMPTY} |
| [Documentation] Parses the output of "voltctl device list" and inspects device ${serial_number} and/or |
| ... ${device_id} Match on OLT Serial number or Device Id and inspect states |
| Validate Device ${admin_state} ${oper_status} ${connect_status} ${serial_number} ${device_id} |
| |
| Validate ONU Devices |
| [Arguments] ${admin_state} ${oper_status} ${connect_status} ${List_ONU_Serial} |
| [Documentation] Parses the output of "voltctl device list" and inspects device ${List_ONU_Serial} |
| ... Iteratively match on each Serial number contained in ${List_ONU_Serial} and inspect |
| ... states including MIB state |
| FOR ${serial_number} IN @{List_ONU_Serial} |
| Validate Device ${admin_state} ${oper_status} ${connect_status} ${serial_number} |
| ... onu_reason=omci-flows-pushed onu=True |
| END |
| |
| Validate Device Port Types |
| [Arguments] ${device_id} ${pon_type} ${ethernet_type} |
| [Documentation] Parses the output of voltctl device ports <device_id> and matches the port types listed |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device ports ${device_id} -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${astate}= Get From Dictionary ${value} adminstate |
| ${opstatus}= Get From Dictionary ${value} operstatus |
| ${type}= Get From Dictionary ${value} type |
| Should Be Equal '${astate}' 'ENABLED' Device ${device_id} port admin_state != ENABLED values=False |
| Should Be Equal '${opstatus}' 'ACTIVE' Device ${device_id} port oper_status != ACTIVE values=False |
| Should Be True '${type}' == '${pon_type}' or '${type}' == '${ethernet_type}' |
| ... Device ${device_id} port type is neither ${pon_type} or ${ethernet_type} |
| END |
| |
| Validate OLT Port Types |
| [Documentation] Parses the output of voltctl device ports ${olt_device_id} and matches the port types listed |
| [Arguments] ${pon_type} ${ethernet_type} |
| Validate Device Port Types ${olt_device_id} ${pon_type} ${ethernet_type} |
| |
| Validate ONU Port Types |
| [Arguments] ${List_ONU_Serial} ${pon_type} ${ethernet_type} |
| [Documentation] Parses the output of voltctl device ports for each ONU SN listed in ${List_ONU_Serial} |
| ... and matches the port types listed |
| FOR ${serial_number} IN @{List_ONU_Serial} |
| ${onu_dev_id}= Get Device ID From SN ${serial_number} |
| Validate Device Port Types ${onu_dev_id} ${pon_type} ${ethernet_type} |
| END |
| |
| Validate Device Flows |
| [Arguments] ${device_id} ${test}=${EMPTY} |
| [Documentation] Parses the output of voltctl device flows <device_id> and expects flow count > 0 |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device flows ${device_id} -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| Log 'Number of flows = ' ${length} |
| Run Keyword If '${test}' == '${EMPTY}' Should Be True ${length} > 0 |
| ... Number of flows for ${device_id} was 0 |
| ... ELSE Should Be True ${length} == ${test} |
| ... Number of flows for ${device_id} was not ${test} |
| |
| Validate OLT Flows |
| [Documentation] Parses the output of voltctl device flows ${olt_device_id} and expects flow count > 0 |
| Validate Device Flows ${olt_device_id} |
| |
| Validate ONU Flows |
| [Arguments] ${List_ONU_Serial} ${test} |
| [Documentation] Parses the output of voltctl device flows for each ONU SN listed in ${List_ONU_Serial} |
| ... and expects flow count == 0 |
| FOR ${serial_number} IN @{List_ONU_Serial} |
| ${onu_dev_id}= Get Device ID From SN ${serial_number} |
| Validate Device Flows ${onu_dev_id} ${test} |
| END |
| |
| Validate Logical Device |
| [Documentation] Validate Logical Device is listed |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl logicaldevice list -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${devid}= Get From Dictionary ${value} id |
| ${rootdev}= Get From Dictionary ${value} rootdeviceid |
| ${sn}= Get From Dictionary ${value} serialnumber |
| Exit For Loop |
| END |
| Should Be Equal '${rootdev}' '${olt_device_id}' Root Device does not match ${olt_device_id} values=False |
| Should Be Equal '${sn}' '${BBSIM_OLT_SN}' Logical Device ${sn} does not match ${BBSIM_OLT_SN} |
| ... values=False |
| [Return] ${devid} |
| |
| Validate Logical Device Ports |
| [Arguments] ${logical_device_id} |
| [Documentation] Validate Logical Device Ports are listed and are > 0 |
| ${rc} ${output}= Run and Return Rc and Output |
| ... ${VOLTCTL_CONFIG}; voltctl logicaldevice ports ${logical_device_id} -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| Should Be True ${length} > 0 Number of ports for ${logical_device_id} was 0 |
| |
| Validate Logical Device Flows |
| [Arguments] ${logical_device_id} |
| [Documentation] Validate Logical Device Flows are listed and are > 0 |
| ${rc} ${output}= Run and Return Rc and Output |
| ... ${VOLTCTL_CONFIG}; voltctl logicaldevice flows ${logical_device_id} -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| Should Be True ${length} > 0 Number of flows for ${logical_device_id} was 0 |
| |
| Retrieve Peer List From OLT |
| [Arguments] ${olt_peer_list} |
| [Documentation] Retrieve the list of peer device id list from port list |
| ${rc} ${output}= Run and Return Rc and Output |
| ... ${VOLTCTL_CONFIG}; voltctl device ports ${olt_device_id} -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${type}= Get From Dictionary ${value} type |
| ${peers}= Get From Dictionary ${value} peers |
| Run Keyword If '${type}' == 'PON_OLT' Exit For Loop |
| END |
| ${length}= Get Length ${peers} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${peers} ${INDEX} |
| ${peer_id}= Get From Dictionary ${value} deviceid |
| Append To List ${olt_peer_list} ${peer_id} |
| END |
| |
| Validate OLT Peer Id List |
| [Arguments] ${olt_peer_id_list} |
| [Documentation] Match each entry in the ${olt_peer_id_list} against ONU device ids. |
| FOR ${peer_id} IN @{olt_peer_id_list} |
| Match OLT Peer Id ${peer_id} |
| END |
| |
| Match OLT Peer Id |
| [Arguments] ${olt_peer_id} |
| [Documentation] Lookup the OLT Peer Id in against the list of ONU device Ids |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${devid}= Get From Dictionary ${value} id |
| Run Keyword If '${devid}' == '${olt_peer_id}' Exit For Loop |
| Run Keyword If '${INDEX}' == '${length}' Fail Peer id ${olt_peer_id} does not match any ONU device id; |
| END |
| |
| Validate ONU Peer Id |
| [Arguments] ${olt_device_id} ${List_ONU_Serial} |
| [Documentation] Match each ONU peer to that of the OLT device id |
| FOR ${onu_serial} IN @{List_ONU_Serial} |
| ${onu_dev_id}= Get Device ID From SN ${onu_serial} |
| Match ONU Peer Id ${onu_dev_id} |
| END |
| |
| Match ONU Peer Id |
| [Arguments] ${onu_dev_id} |
| [Documentation] Match an ONU peer to that of the OLT device id |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device ports ${onu_dev_id} -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${type}= Get From Dictionary ${value} type |
| ${peers}= Get From Dictionary ${value} peers |
| Run Keyword If '${type}' == 'PON_ONU' Exit For Loop |
| END |
| ${length}= Get Length ${peers} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${peers} ${INDEX} |
| ${peer_id}= Get From Dictionary ${value} deviceid |
| END |
| Should Be Equal '${peer_id}' '${olt_device_id}' |
| ... Mismatch between ONU peer ${peer_id} and OLT device id ${olt_device_id} values=False |
| |
| Get Device ID From SN |
| [Arguments] ${serial_number} |
| [Documentation] Gets the device id by matching for ${serial_number} |
| ${output}= Run ${VOLTCTL_CONFIG}; voltctl device list -o json |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${id}= Get From Dictionary ${value} id |
| ${sn}= Get From Dictionary ${value} serialnumber |
| Run Keyword If '${sn}' == '${serial_number}' Exit For Loop |
| END |
| [Return] ${id} |
| |
| Get Logical Device ID From SN |
| [Arguments] ${serial_number} |
| [Documentation] Gets the device id by matching for ${serial_number} |
| ${output}= Run ${VOLTCTL_CONFIG}; voltctl device list -o json |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${id}= Get From Dictionary ${value} parentid |
| ${sn}= Get From Dictionary ${value} serialnumber |
| Run Keyword If '${sn}' == '${serial_number}' Exit For Loop |
| END |
| [Return] ${id} |
| |
| Build ONU SN List |
| [Arguments] ${serial_numbers} |
| [Documentation] Appends all ONU SNs to the ${serial_numbers} list |
| FOR ${INDEX} IN RANGE 0 ${num_onus} |
| Append To List ${serial_numbers} ${hosts.src[${INDEX}].onu} |
| END |
| |
| Get SN From Device ID |
| [Arguments] ${device_id} |
| [Documentation] Gets the device id by matching for ${device_id} |
| ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list -o json |
| Should Be Equal As Integers ${rc} 0 |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${id}= Get From Dictionary ${value} id |
| ${sn}= Get From Dictionary ${value} serialnumber |
| Run Keyword If '${id}' == '${device_id}' Exit For Loop |
| END |
| [Return] ${sn} |
| |
| Validate Device Removed |
| [Arguments] ${id} |
| [Documentation] Verifys that device, ${serial_number}, has been removed |
| ${output}= Run ${VOLTCTL_CONFIG}; voltctl device list -o json |
| ${jsondata}= To Json ${output} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata} |
| @{ids}= Create List |
| FOR ${INDEX} IN RANGE 0 ${length} |
| ${value}= Get From List ${jsondata} ${INDEX} |
| ${device_id}= Get From Dictionary ${value} id |
| Append To List ${ids} ${device_id} |
| END |
| List Should Not Contain Value ${ids} ${id} |