blob: e4b429c3929382dc7021412b1f5b026c1e6ab244 [file] [log] [blame]
# Copyright 2020 - present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# FIXME Can we use the same test against BBSim and Hardware?
*** Settings ***
Documentation Test various end-to-end scenarios
Suite Setup Setup Suite
Test Setup Setup
Test Teardown Teardown
Suite Teardown Teardown Suite
Library Collections
Library String
Library OperatingSystem
Library XML
Library RequestsLibrary
Library ../../libraries/DependencyLibrary.py
Resource ../../libraries/onos.robot
Resource ../../libraries/voltctl.robot
Resource ../../libraries/voltha.robot
Resource ../../libraries/utils.robot
Resource ../../libraries/k8s.robot
Resource ../../variables/variables.robot
Resource ../../libraries/power_switch.robot
*** Variables ***
${POD_NAME} flex-ocp-cord
${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
${HELM_CHARTS_DIR} ~/helm-charts
${VOLTHA_POD_NUM} 8
${NAMESPACE} voltha
# For below variable value, using deployment name as using grep for
# parsing radius pod name, we can also use full radius pod name
${RESTART_POD_NAME} radius
${timeout} 120s
${of_id} 0
${logical_id} 0
${has_dataplane} True
${teardown_device} False
${scripts} ../../scripts
${with_onos} True
${values_dir} ../data
${kind_voltha_dir} ~/kind-voltha
# Per-test logging on failure is turned off by default; set this variable to enable
${container_log_dir} ${None}
${pausebeforesanity} False
${onos_version} ${EMPTY}
*** Test Cases ***
Sanity E2E Test for OLT/ONU on POD
[Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
... Validate successful authentication/DHCP/E2E ping for the tech profile that is used
[Tags] sanity test1
[Setup] Run Keywords Start Logging SanityTest
... AND Setup
[Teardown] Run Keywords Collect Logs
... AND Stop Logging SanityTest
Run Keyword If ${has_dataplane} Clean Up Linux
Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
Start voltha containers in a specific order and run sanity test
[Documentation] Starts voltha containers in a specific order and run sanity test
... Assuming that test1 was executed where all the ONUs are authenticated/DHCP/pingable
... Two starts of voltha container in specific orders are supported:
... First order: voltha, voltha-adapters-simulated, voltha-adapters-open-olt, voltha-adapters-open-onu, onos
... Second order: voltha-adapters-simulated, voltha-adapters-open-olt, voltha-adapters-open-onu, voltha, onos
... For both orders following scenarios will be run
... - Remove helm charts
... - Restart Helm Charts in a specific order
... - Restart Port Forwarding
... - Repeat the sanity check
[Tags] functional VOL-2008 StartVolthaContainers notready
[Setup] Start Logging StartVolthaContainers
[Teardown] Run Keywords Collect Logs
... AND Stop Logging StartVolthaContainers
${list_order} Create List First Second
# Get simulated adpters are running
${contains_sim}= Set Variable False
${container} Get Container Dictionary voltha
FOR ${key} IN @{container.keys()}
${contains_sim}= Evaluate "sim-voltha-adapter" in """${key}"""
Exit For Loop IF ${contains_sim}
END
# Prepare Helm Chart list
${list_voltha_apps} Create List ofagent rw-core
${list_voltha_names} Create List voltha-voltha-ofagent voltha-voltha-rw-core
${voltha} CreateDictionary helmchart=voltha namespace=voltha
... apps=${list_voltha_apps} names=${list_voltha_names}
${list_sim_apps} Create List adapter-simulated-olt adapter-simulated-onu
${list_sim_names} Create List sim-voltha-adapter-simulated-olt sim-voltha-adapter-simulated-onu
${sim} CreateDictionary helmchart=sim namespace=voltha
... apps=${list_sim_apps} names=${list_sim_names}
${list_openolt_apps} Create List adapter-open-olt
${list_openolt_names} Create List open-olt-voltha-adapter-openolt
${open-olt} CreateDictionary helmchart=open-olt namespace=voltha
... apps=${list_openolt_apps} names=${list_openolt_names}
${list_openonu_apps} Create List adapter-open-onu
${list_openonu_names} Create List open-onu-voltha-adapter-openonu
${open-onu} CreateDictionary helmchart=open-onu namespace=voltha
... apps=${list_openonu_apps} names=${list_openonu_names}
${list_onos_apps} Create List onos-onos-classic
${list_onos_names} Create List onos-onos-classic
${onos} CreateDictionary helmchart=onos namespace=default
... apps=${list_onos_apps} names=${list_onos_names}
${List_Helm_Charts} Create List
Run Keyword If ${contains_sim}
... Append To List ${List_Helm_Charts} ${voltha} ${sim} ${open-olt} ${open-onu} ${onos}
... ELSE
... Append To List ${List_Helm_Charts} ${voltha} ${open-olt} ${open-onu} ${onos}
# Start Loop over both orders
FOR ${order} IN @{list_order}
Perfom Start voltha containers in a specific order ${List_Helm_Charts} ${order} ${contains_sim}
... ${with_onos}
END
*** Keywords ***
Setup Suite
[Documentation] Set up the test suite
Common Test Suite Setup
#Restore all ONUs
#Run Keyword If ${has_dataplane} RestoreONUs ${num_onus}
#power_switch.robot needs it to support different vendor's power switch
${switch_type}= Get Variable Value ${web_power_switch.type}
Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type}
Perfom Start voltha containers in a specific order
[Arguments] ${List_Helm_Charts} ${order} ${contains_sim} ${with_onos}
[Documentation] Performes start ofvoltha containers in a specific order and run sanity test
# Repeat Teardown Suite
Run Keyword If ${with_onos}
... Log \r\nRepeat Teardown Suite (${order} order)... console=yes
Run Keyword If ${with_onos} Teardown Suite
# Remove Helm Charts
Log \r\nRemove Helm Charts (${order} order)... console=yes
Remove Helm Charts ${List_Helm_Charts}
# Restart Helm Charts
Log \r\nRestart Helm Charts (${order} order)... console=yes
Restart Helm Charts ${List_Helm_Charts} ${order} ${contains_sim}
# Restart Port Forwarding
Log \r\nRestart Port Forwarding (${order} order)... console=yes
Restart Port Forwarding
# Push ONOS Kafka Configuration
Run Keyword If ${with_onos}
... Log \r\nPush ONOS Kafka Configuration (${order} order)... console=yes
Run Keyword If ${with_onos} Sleep 5s
Run Keyword If ${with_onos}
... Wait Until Keyword Succeeds 30s 3s Push ONOS Kafka Configuration
# Push ONOS DHCP L2 Relay Configuration
Run Keyword If ${with_onos}
... Log \r\nPush ONOS DHCP L2 Relay Configuration (${order} order)... console=yes
Run Keyword If ${with_onos} Sleep 5s
Run Keyword If ${with_onos}
... Wait Until Keyword Succeeds 30s 3s Push ONOS DHCP L2 Relay Configuration
#Enable VOLTHA ONOS EAPOL provisioning
Run Keyword If ${with_onos}
... Log \r\nEnable VOLTHA ONOS EAPOL provisioning (${order} order)... console=yes
Run Keyword If ${with_onos} Sleep 5s
Run Keyword If ${with_onos}
... Wait Until Keyword Succeeds 30s 3s Enable VOLTHA ONOS EAPOL provisioning
#Enable VOLTHA ONOS DHCP Provisioning
Run Keyword If ${with_onos}
... Log \r\nEnable VOLTHA ONOS DHCP Provisioning (${order} order)... console=yes
Run Keyword If ${with_onos} Sleep 5s
Run Keyword If ${with_onos}
... Wait Until Keyword Succeeds 30s 3s Enable VOLTHA ONOS DHCP Provisioning
#Disable VOLTHA ONOS IGMP Provisioning
Run Keyword If ${with_onos}
... Log \r\nDisable VOLTHA ONOS IGMP Provisioning (${order} order)... console=yes
Run Keyword If ${with_onos} Sleep 5s
Run Keyword If ${with_onos}
... Wait Until Keyword Succeeds 30s 3s Disable VOLTHA ONOS IGMP Provisioning
#Push ONOS SADIS Configuration
Run Keyword If ${with_onos}
... Log \r\nPush ONOS SADIS Configuration (${order} order)... console=yes
Run Keyword If ${with_onos} Sleep 5s
Run Keyword If ${with_onos}
... Wait Until Keyword Succeeds 30s 3s Push ONOS SADIS Configuration
# Configure ONOS RADIUS Connection
Run Keyword If ${with_onos}
... Log \r\nPush ONOS RADIUS Connection (${order} order)... console=yes
Run Keyword If ${with_onos} Sleep 5s
Run Keyword If ${with_onos}
... Wait Until Keyword Succeeds 30s 3s Configure ONOS RADIUS Connection
Log \r\nSleep 10s (${order} order)... console=yes
Sleep 10s
# Repeat Suite Setup
Run Keyword If ${with_onos}
... Log \r\nRepeat Suite Setup (${order} order)... console=yes
Run Keyword If ${with_onos} Common Test Suite Setup
# Repeat Setup
Run Keyword If ${with_onos}
... Log \r\nRepeat Setup (${order} order)... console=yes
Run Keyword If ${with_onos} Setup
Run Keyword If ${pausebeforesanity} Import Library Dialogs
Run Keyword If ${pausebeforesanity} Pause Execution Press OK to continue with Sanity Check!
# Repeat Sanity Test E2E Test for OLT/ONU on POD
Log \r\nRepeat Sanity Test E2E Test for OLT/ONU on POD (${order} order)... console=yes
Run Keyword If ${has_dataplane} Clean Up Linux
Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
Remove Helm Charts
[Arguments] ${List_Helm_Charts}
[Documentation] Removes the helm charts
FOR ${helm_chart} IN @{List_Helm_Charts}
${helmchartname} Get From Dictionary ${helm_chart} helmchart
${namespace} Get From Dictionary ${helm_chart} namespace
Run Keyword If ${with_onos} or ('${helmchartname}'!='onos') Remove VOLTHA Helm Charts ${helmchartname}
... ${namespace}
${list_names} Get From Dictionary ${helm_chart} names
Run Keyword If ${with_onos} or ('${helmchartname}'!='onos')
... Wait For Pods Not Exist ${namespace} ${list_names}
END
Remove VOLTHA Helm Charts
[Arguments] ${name} ${namespace}
[Documentation] Remove VOLTHA helm charts
${cmd} Catenate helm uninstall --no-hooks --namespace '${namespace}' '${name}'
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Restart Helm Charts
[Arguments] ${List_Helm_Charts} ${order} ${contains_sim}
[Documentation] Restarts the helm charts
Run Keyword If '${order}'=='First' Restart Voltha
Run Keyword If ${contains_sim} Restart Voltha Adapters Simulated
Restart Voltha Adapters Open OLT
Restart Voltha Adapters Open ONU
Run Keyword If '${order}'=='Second' Restart Voltha
Run Keyword If ${with_onos} Restart ONOS
FOR ${helm_chart} IN @{List_Helm_Charts}
${helmchartname} Get From Dictionary ${helm_chart} helmchart
${namespace} Get From Dictionary ${helm_chart} namespace
${list_apps} Get From Dictionary ${helm_chart} apps
Run Keyword If ${with_onos} or ('${helmchartname}'!='onos')
... Wait For Pods Ready ${namespace} ${list_apps}
END
Restart Voltha Adapters Simulated
[Documentation] Restart Voltha Adapters Simulated helm chart
${cmd} Catenate
... helm install -f ${values_dir}/sim-adapter-values.yaml --create-namespace
... --set services.etcd.service=etcd.default.svc --set services.etcd.port=2379
... --set services.etcd.address=etcd.default.svc:2379 --set kafka_broker=kafka.default.svc:9092
... --set services.kafka.adapter.service=kafka.default.svc --set services.kafka.adapter.port=9092
... --set services.kafka.cluster.service=kafka.default.svc --set services.kafka.cluster.port=9092
... --set services.kafka.adapter.address=kafka.default.svc:9092
... --set services.kafka.cluster.address=kafka.default.svc:9092 --set defaults.log_level=WARN
... --namespace voltha sim onf/voltha-adapter-simulated
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Restart Voltha Adapters Open OLT
[Documentation] Restart Voltha Adapters Open OLT helm chart
${cmd} Catenate
... helm install -f ${values_dir}/open-olt-values.yaml --create-namespace
... --set services.etcd.service=etcd.default.svc --set services.etcd.port=2379
... --set services.etcd.address=etcd.default.svc:2379 --set kafka_broker=kafka.default.svc:9092
... --set services.kafka.adapter.service=kafka.default.svc --set services.kafka.adapter.port=9092
... --set services.kafka.cluster.service=kafka.default.svc --set services.kafka.cluster.port=9092
... --set services.kafka.cluster.address=kafka.default.svc:9092
... --set services.kafka.adapter.address=kafka.default.svc:9092 --set defaults.log_level=WARN
... --namespace voltha open-olt onf/voltha-adapter-openolt
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Restart Voltha Adapters Open ONU
[Documentation] Restart Voltha Adapters Open ONU helm chart
${cmd} Catenate
... helm install -f ${values_dir}/open-onu-values.yaml --create-namespace
... --set services.etcd.service=etcd.default.svc --set services.etcd.port=2379
... --set services.etcd.address=etcd.default.svc:2379 --set kafka_broker=kafka.default.svc:9092
... --set services.kafka.adapter.service=kafka.default.svc --set services.kafka.adapter.port=9092
... --set services.kafka.cluster.service=kafka.default.svc --set services.kafka.cluster.port=9092
... --set services.kafka.adapter.address=kafka.default.svc:9092
... --set services.kafka.cluster.address=kafka.default.svc:9092 --set replicas.adapter_open_onu=1
... --set defaults.log_level=WARN --namespace voltha open-onu onf/voltha-adapter-openonu
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Restart Voltha
[Documentation] Restart Voltha helm chart
${cmd} Catenate
... helm install -f ${values_dir}/voltha-values.yaml --create-namespace --set therecanbeonlyone=true
... --set services.etcd.service=etcd.default.svc --set services.etcd.port=2379
... --set services.etcd.address=etcd.default.svc:2379 --set kafka_broker=kafka.default.svc:9092
... --set services.kafka.adapter.service=kafka.default.svc --set services.kafka.adapter.port=9092
... --set services.kafka.cluster.service=kafka.default.svc --set services.kafka.cluster.port=9092
... --set services.kafka.adapter.address=kafka.default.svc:9092
... --set services.kafka.cluster.address=kafka.default.svc:9092
... --set 'services.controller[0].service=onos-onos-classic-0.onos-onos-classic-hs.default.svc'
... --set 'services.controller[0].port=6653'
... --set 'services.controller[0].address=onos-onos-classic-0.onos-onos-classic-hs.default.svc:6653'
... --set defaults.log_level=WARN --namespace voltha voltha onf/voltha
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Restart ONOS
[Documentation] Restart ONOS helm chart
${cmd}= Run Keyword If '${onos_version}'=='${EMPTY}' Catenate
... helm install -f ${values_dir}/onos-values.yaml
... --create-namespace --set image.repository=voltha/voltha-onos,image.tag=master,replicas=1,atomix.replicas=0
... --set defaults.log_level=WARN --namespace default onos onos/onos-classic
... ELSE Catenate
... helm install -f ${values_dir}/minimal-values.yaml
... --create-namespace --set image.repository=voltha/voltha-onos,image.tag=master,replicas=1,atomix.replicas=0
... --set defaults.log_level=WARN --namespace default --version ${onos_version} onos onos/onos-classic
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Restart Port Forwarding
[Documentation] Restarts the VOLTHA port forwarding rules
${List_Tags} Create List etcd-minimal voltha-voltha-api-minimal kafka-minimal
... onos-onos-classic-hs-minimal
FOR ${tag} IN @{List_Tags}
Run Keyword If ${with_onos} or ('${tag}'!='onos-onos-classic-hs-minimal')
... Restart VOLTHA Port Forward ${tag}
END
Push ONOS Kafka Configuration
[Documentation] Pushes the ONOS kafka Configuration
${cmd} Catenate
... cd ~/kind-voltha;
... curl -sSL --user karaf:karaf -w %\{http_code\} -X POST --fail -H Content-Type:application/json
... http://127.0.0.1:8181/onos/v1/network/configuration/apps/org.opencord.kafka
... --data '{"kafka":{"bootstrapServers":"kafka.default.svc:9092"}}'; cd -
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Push ONOS DHCP L2 Relay Configuration
[Documentation] Pushes the ONOS DHCP L2 Relay Configuration
${cmd} Catenate
... cd ~/kind-voltha;
... curl -sSL --user karaf:karaf -w %\{http_code\} -X POST --fail -H Content-Type:application/json
... http://127.0.0.1:8181/onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
... --data @onos-files/onos-dhcpl2relay.json; cd -
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Enable VOLTHA ONOS EAPOL provisioning
[Documentation] Pushes the ONOS EAPOL Configuration
${cmd} Catenate
... cd ~/kind-voltha;
... curl -sSL --user karaf:karaf -w %\{http_code\} -X POST --fail -H Content-Type:application/json
... http://127.0.0.1:8181/onos/v1/configuration/org.opencord.olt.impl.OltFlowService
... --data '{"enableEapol":true}'; cd -
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Enable VOLTHA ONOS DHCP Provisioning
[Documentation] Pushes the ONOS OLT DHCP Configuration
${cmd} Catenate
... cd ~/kind-voltha;
... curl -sSL --user karaf:karaf -w %\{http_code\} -X POST --fail -H Content-Type:application/json
... http://127.0.0.1:8181/onos/v1/configuration/org.opencord.olt.impl.OltFlowService
... --data '{"enableDhcpOnNni":true,"enableDhcpV4":true}'; cd -
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Disable VOLTHA ONOS IGMP Provisioning
[Documentation] Pushes the ONOS IGMP Configuration
${cmd} Catenate
... cd ~/kind-voltha;
... curl -sSL --user karaf:karaf -w %\{http_code\} -X POST --fail -H Content-Type:application/json
... http://127.0.0.1:8181/onos/v1/configuration/org.opencord.olt.impl.OltFlowService
... --data '{"enableIgmpOnNni":false}'; cd -
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Push ONOS SADIS Configuration
[Documentation] Pushes the ONOS SADIS Configuration
${cmd} Catenate
... cd ~/kind-voltha;
... curl -sSL --user karaf:karaf -w %\{http_code\} -X POST --fail -H Content-Type:application/json
... http://127.0.0.1:8181/onos/v1/network/configuration/apps/org.opencord.sadis
... --data @onos-files/onos-sadis-sample.json; cd -
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0
Configure ONOS RADIUS Connection
[Documentation] Configures the ONOS RADIUS Connection
${cmd} Catenate
... sed -e s/:RADIUS_SVC:/radius-freeradius.default.svc/g -e s/:RADIUS_PORT:/1812/
... ${kind_voltha_dir}/onos-files/onos-aaa.json | curl --fail -sSL --user karaf:karaf -X POST
... http://127.0.0.1:8181/onos/v1/network/configuration/apps/org.opencord.aaa
... -H Content-type:application/json -d@-
${rc} Run And Return Rc ${cmd}
Should Be Equal as Integers ${rc} 0