| # Copyright 2017 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Tests can be enabled by passing the following tags: |
| # - [setup] Creates and enable the OLT devices |
| # - [activation] Checks that ONUs are active in VOLTHA and ports discevered in ONOS |
| # - [flow-before] Checks that flows are pushed (before subscriber provisioning) |
| # - [authentication] Checks that subscribers are correctly authenticated |
| # - [provision] Provision the data-plane flows for all the subscribers |
| # - [flow-after] Checks that flows are pushed (after subscriber provisioning) |
| # - [dhcp] Checks that subscribers have received an IP |
| # |
| # To run the full test: |
| # robot Voltha_Scale_Tests.robot |
| # |
| # To run only ceratain tests: |
| # robot -i activation -i flow-before Voltha_Scale_Tests.robot |
| # |
| # To exclude only ceratain tests: |
| # robot -e -i flow-before Voltha_Scale_Tests.robot |
| # |
| # Once te test complete you can extrapolate the results by using |
| # python extract-times.py |
| |
| *** Settings *** |
| Documentation Collect measurements on VOLTHA performances |
| Suite Setup Setup Suite |
| #Test Setup Setup |
| #Test Teardown Teardown |
| Suite Teardown Teardown Suite |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/flows.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/bbsim.robot |
| Resource ../../variables/variables.robot |
| |
| *** Variables *** |
| ${ONOS_SSH_IP} 127.0.0.1 |
| ${ONOS_SSH_PORT} 30115 |
| ${ONOS_REST_IP} 127.0.0.1 |
| ${ONOS_REST_PORT} 30120 |
| |
| ${BBSIM_REST_IP} 127.0.0.1 |
| ${BBSIM_REST_PORT} 50071 |
| |
| ${NAMESPACE} default |
| |
| # Scale pipeline values |
| ${stackId} 1 |
| ${olt} 1 |
| ${pon} 1 |
| ${onu} 1 |
| |
| ${enableFlowProvisioning} true |
| ${enableSubscriberProvisioning} true |
| |
| ${workflow} att |
| ${withEapol} false |
| ${withDhcp} false |
| ${withIgmp} false |
| # as of now the LLDP flow is always installed |
| ${withLLDP} true |
| |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| |
| ${timeout} 10m |
| |
| *** Test Cases *** |
| |
| Create and Enable devices |
| [Documentation] Create and enable the OLTs in VOLTHA |
| [Tags] setup |
| ${olt_device_ids}= Create List |
| FOR ${INDEX} IN RANGE 0 ${olt} |
| ${olt_device_id}= Create Device bbsim${INDEX} 50060 openolt |
| Enable Device ${olt_device_id} |
| Append To List ${olt_device_ids} ${olt_device_id} |
| END |
| |
| Set Suite Variable ${olt_device_ids} |
| |
| OLTs in ONOS |
| [Documentation] Check that ONOS recognize the correct number of OLTs |
| [Tags] activation plot-onos-olts |
| ${onos_devices}= Compute Device IDs |
| FOR ${deviceId} IN @{onos_devices} |
| Wait for Olt in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${deviceId} |
| END |
| |
| Onu Activation in VOLTHA |
| [Documentation] Check that all ONUs reach the ACTIVE/ENABLED state in VOLTHA |
| [Tags] activation plot-voltha-onus |
| Wait For ONUs In VOLTHA ${total_onus} |
| |
| Port Discovery in ONOS |
| [Documentation] Check that all the UNI ports show up in ONOS |
| [Tags] activation plot-onos-ports |
| ${onos_devices}= Compute Device IDs |
| FOR ${deviceId} IN @{onos_devices} |
| Wait for Ports in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus_per_olt} ${deviceId} BBSM |
| END |
| |
| Flows validation in VOLTHA before subscriber provisioning |
| [Documentation] Check that all the flows has been stored in the logical device |
| [Tags] flow-before plot-voltha-flows-before |
| # NOTE fail the test immediately if we're trying to check flows without provisioning them |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for Logical Devices flows ${workflow} ${total_onus} ${olt} false |
| ... ${withEapol} ${withDhcp} ${withIgmp} ${withLLDP} |
| |
| Flows validation in VOLTHA Adapters before subscriber provisioning |
| [Documentation] Check that all flows has been store in devices of type openolt |
| [Tags] flow-before plot-voltha-openolt-flows-before only-me |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for OpenOLT Devices flows ${workflow} ${total_onus} ${olt} false |
| ... ${withEapol} ${withDhcp} ${withIgmp} ${withLLDP} |
| |
| Flows validation in ONOS before subscriber provisioning |
| [Documentation] Check that all the flows has been acknowledged |
| [Tags] flow-before plot-onos-flows-before |
| # NOTE fail the test immediately if we're trying to check flows without provisioning them |
| Should Be Equal ${enableFlowProvisioning} true |
| |
| ${onos_devices}= Compute Device IDs |
| FOR ${deviceId} IN @{onos_devices} |
| Wait for all flows to in ADDED state ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... ${deviceId} ${workflow} ${total_onus_per_olt} 1 false |
| ... ${withEapol} ${withDhcp} ${withIgmp} ${withLLDP} |
| END |
| |
| Wait for subscribers to be Authenticated |
| [Documentation] Check that all subscribers have successfully authenticated |
| [Tags] authentication plot-onos-auth |
| |
| ${onos_devices}= Compute Device IDs |
| FOR ${deviceId} IN @{onos_devices} |
| Wait for AAA Authentication ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus_per_olt} ${deviceId} |
| END |
| |
| Provision subscribers |
| [Documentation] Provision data plane flows for all the subscribers |
| [Tags] provision |
| Should Be Equal ${enableSubscriberProvisioning} true |
| ${onos_devices}= Compute Device IDs |
| FOR ${olt} IN @{onos_devices} |
| Provision all subscribers on device ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${ONOS_SSH_IP} ${ONOS_REST_PORT} ${olt} |
| END |
| |
| Flows validation in VOLTHA after subscriber provisioning |
| [Documentation] Check that all the flows has been stored in the logical device |
| [Tags] flow-after plot-voltha-flows-after |
| # NOTE fail the test immediately if we're trying to check flows without provisioning them |
| Should Be Equal ${enableFlowProvisioning} true |
| |
| Wait for Logical Devices flows ${workflow} ${total_onus} ${olt} true |
| ... ${withEapol} ${withDhcp} ${withIgmp} ${withLLDP} |
| |
| Flows validation in VOLTHA Adapters after subscriber provisioning |
| [Documentation] Check that all flows has been store in devices of type openolt |
| [Tags] flow-after plot-voltha-openolt-flows-after only-me |
| Should Be Equal ${enableFlowProvisioning} true |
| Wait for OpenOLT Devices flows ${workflow} ${total_onus} ${olt} true |
| ... ${withEapol} ${withDhcp} ${withIgmp} ${withLLDP} |
| |
| Flows validation in ONOS after subscriber provisioning |
| [Documentation] Check that all the flows has been acknowledged |
| [Tags] flow-after plot-onos-flows-after |
| # NOTE fail the test immediately if we're trying to check flows without provisioning them |
| Should Be Equal ${enableFlowProvisioning} true |
| |
| ${onos_devices}= Compute Device IDs |
| FOR ${deviceId} IN @{onos_devices} |
| Wait for all flows to in ADDED state ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... ${deviceId} ${workflow} ${total_onus_per_olt} 1 true |
| ... ${withEapol} ${withDhcp} ${withIgmp} ${withLLDP} |
| END |
| |
| Wait for subscribers to have an IP |
| [Documentation] Check that all subscribers have received a DHCP_ACK |
| [Tags] dhcp plot-onos-dhcp |
| ${onos_devices}= Compute Device IDs |
| FOR ${deviceId} IN @{onos_devices} |
| Wait for DHCP Ack ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus_per_olt} ${workflow} ${deviceId} |
| END |
| |
| Perform Igmp Join |
| [Documentation] Performs Igmp Join for all the ONUs of all the OLTs (based on Rest Endpoint) |
| [Tags] non-critical igmp igmp-join |
| FOR ${INDEX} IN RANGE 0 ${olt} |
| ${bbsim_rel}= Catenate SEPARATOR= bbsim ${INDEX} |
| ${bbsim_rel_local_port}= Evaluate ${BBSIM_REST_PORT}+${INDEX} |
| Create Session ${bbsim_rel} http://${BBSIM_REST_IP}:${bbsim_rel_local_port} |
| ${bbsim_pod}= Get Pod Name By Label ${NAMESPACE} release ${bbsim_rel} |
| ${onu_list}= Get ONUs List ${NAMESPACE} ${bbsim_pod} |
| Perform Igmp Join or Leave Per OLT ${bbsim_rel} ${onu_list} join |
| List Service ${NAMESPACE} ${bbsim_pod} |
| END |
| |
| Wait for ONUs Join Igmp Group |
| [Documentation] Checks the ONUs Join the IGMP Group |
| ... Note: Currently, it expects all the ONUs on an OLT joined the same group |
| [Tags] non-critical igmp igmp-join igmp-count-verify igmp-join-count-verify |
| ${onos_devices}= Compute Device IDs |
| FOR ${deviceId} IN @{onos_devices} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify ONUs in Group Count in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${total_onus_per_olt} ${deviceId} |
| END |
| |
| Perform Igmp Leave |
| [Documentation] Performs Igmp Leave for all the ONUs of all the OLTs (based on Rest Endpoint) |
| [Tags] non-critical igmp igmp-leave |
| FOR ${INDEX} IN RANGE 0 ${olt} |
| ${bbsim_rel}= Catenate SEPARATOR= bbsim ${INDEX} |
| ${bbsim_rel_local_port}= Evaluate ${BBSIM_REST_PORT}+${INDEX} |
| Create Session ${bbsim_rel} http://${BBSIM_REST_IP}:${bbsim_rel_local_port} |
| ${bbsim_pod}= Get Pod Name By Label ${NAMESPACE} release ${bbsim_rel} |
| ${onu_list}= Get ONUs List ${NAMESPACE} ${bbsim_pod} |
| Perform Igmp Join or Leave Per OLT ${bbsim_rel} ${onu_list} leave |
| List Service ${NAMESPACE} ${bbsim_pod} |
| END |
| |
| Wait for ONUs Leave Igmp Group |
| [Documentation] Checks the ONUs Leave the IGMP Group |
| ... Note: Currently, it expects all the ONUs on an OLT left the same group |
| [Tags] non-critical igmp igmp-leave igmp-count-verify igmp-leave-count-verify |
| ${onos_devices}= Compute Device IDs |
| FOR ${deviceId} IN @{onos_devices} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Empty Group in ONOS ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${deviceId} |
| END |
| |
| Disable and Delete devices |
| [Documentation] Disable and delete the OLTs in VOLTHA |
| [Tags] non-critical teardown |
| FOR ${olt_device_id} IN @{olt_device_ids} |
| Disable Device ${olt_device_id} |
| Delete Device ${olt_device_id} |
| Remove Values From List ${olt_device_ids} ${olt_device_id} |
| END |
| |
| Set Suite Variable ${olt_device_ids} |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Setup test global variables, open an SSH connection to ONOS and starts a timer |
| Set Suite Variable ${KUBECTL_CONFIG} export KUBECONFIG=%{KUBECONFIG} |
| Set Suite Variable ${VOLTCTL_CONFIG} %{VOLTCONFIG} |
| |
| ${total_onus}= Evaluate ${olt} * ${pon} * ${onu} |
| Set Suite Variable ${total_onus} |
| |
| ${total_onus_per_olt}= Evaluate ${pon} * ${onu} |
| Set Suite Variable ${total_onus_per_olt} |
| |
| ${onos_auth}= Create List karaf karaf |
| Create Session ONOS http://${ONOS_REST_IP}:${ONOS_REST_PORT} auth=${ONOS_AUTH} |
| Run Keyword If '${workflow}'=='tt' |
| ... Send File To Onos ${CURDIR}/../../tests/data/onos-igmp.json apps/ |
| |
| Teardown Suite |
| [Documentation] Close the SSH connection to ONOS |
| Close All ONOS SSH Connections |
| |
| Compute device IDs |
| [Documentation] Creates a list of ONOS device ID based on the test configuration |
| # TODO read ${olt} and ${stackid} from parameters |
| ${base}= Set Variable of:00000a0a0a0a0a |
| ${device_ids}= Create List |
| FOR ${olt_id} IN RANGE 0 ${olt} |
| ${decimal_id}= Catenate SEPARATOR= ${stackid} ${olt_id} |
| ${piece}= Convert To Hex ${decimal_id} length=2 lowercase=yes |
| ${id}= Catenate SEPARATOR= ${base} ${piece} |
| Append To List ${device_ids} ${id} |
| END |
| |
| [Return] ${device_ids} |
| |
| Perform Igmp Join or Leave Per OLT |
| [Documentation] Performs Igmp Join for all the ONUs of an OLT (based on Rest Endpoint) |
| [Arguments] ${bbsim_rel_session} ${onu_list} ${task} |
| FOR ${onu} IN @{onu_list} |
| JoinOrLeave Igmp Rest Based ${bbsim_rel_session} ${onu} ${task} 224.0.0.22 |
| END |
| |