blob: 6f4b76b4585e3daf3294c10bf95b1442c7d5d670 [file] [log] [blame]
# Copyright 2017 - present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# FIXME Can we use the same test against BBSim and Hardware?
*** Settings ***
Documentation Test various functional end-to-end scenarios for TT workflow
Suite Setup Setup Suite
Test Setup Setup
Test Teardown Teardown
Suite Teardown Teardown Suite
Library Collections
Library String
Library OperatingSystem
Library XML
Library RequestsLibrary
Library ../../libraries/DependencyLibrary.py
Resource ../../libraries/onos.robot
Resource ../../libraries/voltctl.robot
Resource ../../libraries/voltha.robot
Resource ../../libraries/utils.robot
Resource ../../libraries/k8s.robot
Resource ../../variables/variables.robot
Resource ../../libraries/power_switch.robot
*** Variables ***
${POD_NAME} flex-ocp-cord
${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
${HELM_CHARTS_DIR} ~/helm-charts
${VOLTHA_POD_NUM} 8
${NAMESPACE} voltha
# For below variable value, using deployment name as using grep for
# parsing radius pod name, we can also use full radius pod name
${RESTART_POD_NAME} radius
${timeout} 60s
${of_id} 0
${logical_id} 0
${has_dataplane} True
${teardown_device} True
${scripts} ../../scripts
# Per-test logging on failure is turned off by default; set this variable to enable
${container_log_dir} ${None}
# logging flag to enable Collect Logs, can be passed via the command line too
# example: -v logging:False
${logging} True
${suppressaddsubscriber} True
*** Test Cases ***
Reboot TT ONUs Physically - Clean Up
[Documentation] This test reboots ONUs physically before execution all the tests
... Test case runs only on the PODs that are configured with PowerSwitch that
... controls the power off/on ONUs/OLT remotely (simulating a physical reboot)
[Tags] functionalTT PowerSwitch RebootAllTTONUs
[Setup] Start Logging RebootAllTTONUs
[Teardown] Run Keywords Collect Logs
... AND Stop Logging RebootAllTTONUs
Power Switch Connection Suite ${web_power_switch.ip} ${web_power_switch.user} ${web_power_switch.password}
FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
Disable Switch Outlet ${src['power_switch_port']}
Sleep 10s
Enable Switch Outlet ${src['power_switch_port']}
END
Sanity E2E Test for TT (HSIA, VoD, VoIP)
[Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
... Validate successful DHCP/E2E ping (no EAPOL and DHCP flows) for the tech profile that is used
... Traffic sent with same vlan from different RGs,
... should reach the NNI port on the OLT with the expected double tagged vlan ids
... Inner vlans from the RG should not change
[Tags] sanityTT
[Setup] Run Keywords Start Logging SanityTestTT
... AND Setup
[Teardown] Run Keywords Collect Logs
... AND Stop Logging SanityTestTT
Run Keyword If ${has_dataplane} Clean Up Linux
Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test TT
#Run Keyword If ${has_dataplane} Clean Up Linux
Sanity E2E Test for TT (MCAST)
[Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
... Validate successful DHCP/E2E ping (no EAPOL and DHCP flows) for the tech profile that is used
... Traffic sent with same vlan from different RGs,
... should reach the NNI port on the OLT with the expected double tagged vlan ids
... Inner vlans from the RG should not change
[Tags] sanityTT-MCAST
[Setup] Run Keyword Start Logging SanityTestTT-MCAST
[Teardown] Run Keywords Collect Logs
... AND Stop Logging SanityTestTT-MCAST
Run Keyword If ${has_dataplane} Clean Up Linux
Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test TT MCAST
Test Disable and Delete OLT for TT
[Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
... Assuming that all the ONUs are DHCP/pingable (i.e. assuming sanityTt test was executed)
... Perform disable on the OLT and validate ONUs state and that the pings do not succeed
... Perform delete on the OLT, Re-do Setup (Recreate the OLT) and Perform Sanity Test TT
[Tags] functionalTT DisableDeleteOLTTt
[Setup] Start Logging DisableDeleteOLTTt
[Teardown] Run Keywords Collect Logs
... AND Stop Logging DisableDeleteOLTTt
@{particular_onu_device_port}= Create List
FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
... ${of_id} ${src['uni_id']}
Append To List ${particular_onu_device_port} ${onu_port}
END
${list_onu_port}= Remove Duplicates ${particular_onu_device_port}
${num_of_provisioned_onus}= Get Length ${list_onu_port}
# Disable and Validate OLT Device
FOR ${I} IN RANGE 0 ${olt_count}
${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
Disable Device ${olt_device_id}
${of_id}= Get ofID From OLT List ${olt_serial_number}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
... Validate OLT Device DISABLED UNKNOWN REACHABLE
... ${olt_serial_number}
${num_onus}= Set Variable ${list_olts}[${I}][onucount]
# Validate ONUs
Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONUs After OLT Disable
... ${num_onus} ${olt_serial_number}
# Verify ONOS Flows
# Number of Access Flows on ONOS equals 16 * the Number of Active ONUs + 3 for default LLDP, IGMP and DHCP
${onos_flows_count}= Run Keyword If ${has_dataplane} Evaluate 16 * ${num_of_provisioned_onus} + 3
... ELSE Evaluate 15 * ${num_of_provisioned_onus} + 3
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
... Verify Added Flow Count for OLT TT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
... ${onos_flows_count}
# Verify VOLTHA Flows
# Number of per OLT Flows equals 10 * Number of Active ONUs + 3 for default LLDP, IGMP and DHCP
${olt_flows}= Run Keyword If ${has_dataplane} Evaluate 10 * ${num_of_provisioned_onus} + 3
... ELSE Evaluate 9 * ${num_of_provisioned_onus} + 3
# Number of per ONU Flows equals 6 for 3play service data plane + 4 for Trap to Host Flows
${onu_flows}= Run Keyword If ${has_dataplane} Set Variable 10
... ELSE Set Variable 9
Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows}
... ${olt_device_id}
${List_ONU_Serial} Create List
Set Suite Variable ${List_ONU_Serial}
Build ONU SN List ${List_ONU_Serial} ${olt_serial_number} ${num_onus}
Log ${List_ONU_Serial}
# TODO: Fix ${onu_flows} calculations based on UNIs provisioned
# Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows
# ... ${List_ONU_Serial} ${onu_flows}
# Delete OLT and Validate Empty Device List
Delete Device ${olt_device_id}
# Check that the OLT and the ONUs are actually removed from the system
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed
... ${olt_serial_number}
Run Keyword and Continue On Failure Validate all ONUS for OLT Removed ${num_all_onus} ${hosts}
... ${olt_serial_number} ${timeout}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
END
# Re-do Setup (Recreate the OLT) and Perform Sanity Test TT
Run Keyword Setup
Run Keyword If ${has_dataplane} Clean Up Linux
Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Tests TT
Verify re-provisioning subscriber after removing provisoned subscriber for TT
[Documentation] Removing/Readding a particular subscriber should have no effect on any other subscriber.
[Tags] functionalTT Readd-subscriber-TT
[Setup] Start Logging Readd-subscriber-TT
[Teardown] Run Keywords Collect Logs
... AND Stop Logging Readd-subscriber-TT
Run Keyword If ${has_dataplane} Clean Up Linux
FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
${service_type}= Get Variable Value ${src['service_type']} "null"
${of_id}= Get ofID From OLT List ${src['olt']}
${onu_device_id}= Get Device ID From SN ${src['onu']}
${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
... ${of_id} ${src['uni_id']}
# Remove Subscriber Access
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port}
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast'
... Wait Until Keyword Succeeds ${timeout} 2s
... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
# Verify VOLTHA flows for ONU under test is Zero
# TODO: Fix ${onu_flows} calculations based on UNIs provisioned
# Wait Until Keyword Succeeds ${timeout} 5s Validate Device Flows
# ... ${onu_device_id} 0
# Add Subscriber Access
Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s
... Validate Device ENABLED ACTIVE
... REACHABLE ${src['onu']} onu=True onu_reason=omci-flows-pushed
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast' Run Keyword And Continue On Failure
... Wait Until Keyword Succeeds ${timeout} 2s Sanity Test TT one ONU ${src}
... ${dst} ${suppressaddsubscriber}
... ELSE IF ${has_dataplane} and '${service_type}' == 'mcast' Run Keyword And Continue On Failure
... Wait Until Keyword Succeeds ${timeout} 2s Sanity Test TT MCAST one ONU ${src}
... ${dst} ${suppressaddsubscriber}
END
Test Disable and Enable ONU for TT
[Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
... Assuming that all the ONUs are DHCP/pingable (i.e. assuming sanitytt test was executed)
... Perform disable on the ONUs and validate that the pings do not succeed
... Perform enable on the ONUs and validate that the pings are successful
[Tags] functionalTT DisableEnableONUTT
[Setup] Start Logging DisableEnableONUTT
[Teardown] Run Keywords Collect Logs
... AND Stop Logging DisableEnableONUTT
FOR ${I} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${I}]}
${dst}= Set Variable ${hosts.dst[${I}]}
${service_type}= Get Variable Value ${src['service_type']} "null"
${of_id}= Get ofID From OLT List ${src['olt']}
${onu_device_id}= Get Device ID From SN ${src['onu']}
${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
... ${of_id} ${src['uni_id']}
Disable Device ${onu_device_id}
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
... Validate Device DISABLED UNKNOWN
... REACHABLE ${src['onu']} onu=True onu_reason=omci-admin-lock
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
... Wait Until Keyword Succeeds 60s 2s
... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Sleep 5s
Enable Device ${onu_device_id}
Run Keyword If ${has_dataplane} and '${service_type}' == 'mcast' Clean Up Linux
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s
... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']}
Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast' Run Keyword And Continue On Failure
... Wait Until Keyword Succeeds ${timeout} 2s Sanity Test TT one ONU ${src}
... ${dst} ${suppressaddsubscriber}
... ELSE IF ${has_dataplane} and '${service_type}' == 'mcast' Run Keyword And Continue On Failure
... Wait Until Keyword Succeeds ${timeout} 2s Sanity Test TT MCAST one ONU ${src}
... ${dst} ${suppressaddsubscriber}
END
*** Keywords ***
Setup Suite
[Documentation] Set up the test suite
Common Test Suite Setup
${switch_type}= Get Variable Value ${web_power_switch.type}
Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type}
Clear All Devices Then Create New Device
[Documentation] Remove any devices from VOLTHA and ONOS
# Remove all devices from voltha and nos
Delete All Devices and Verify
# Execute normal test Setup Keyword
Setup
Teardown Suite
[Documentation] Tear down steps for the suite
Run Keyword If ${has_dataplane} Clean Up Linux
Run Keyword If ${teardown_device} Delete All Devices And Verify
Close All ONOS SSH Connections