| # Copyright 2022-2023 Open Networking Foundation (ONF) and the ONF Contributors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # common functions |
| |
| *** Settings *** |
| Documentation Library for various utilities |
| Library SSHLibrary |
| Library String |
| Library DateTime |
| Library Process |
| Library Collections |
| Library RequestsLibrary |
| Library OperatingSystem |
| Library XML |
| Resource ./k8s.robot |
| |
| *** Variables *** |
| |
| *** Keywords *** |
| |
| Get BBF Device Aggregation |
| [Documentation] Extract, running an except script, the XML that |
| ... represent all the Network viewed by the BBF-Adapter and |
| ... copy it to the ${XMLDestPath}. |
| [Arguments] ${namespace} ${XMLDestPath} ${pathToScript} |
| |
| #Remove the previus XML (extract by previus tests) |
| ${rc} ${exec_pod_name}= Run and Return Rc and Output |
| ... rm ${XMLDestPath} |
| #Retrive the Name of the BBF-Adapter Pod |
| ${rc} ${exec_pod_name}= Run and Return Rc and Output |
| ... kubectl get pods -n ${namespace} -l app=bbf-adapter --no-headers | awk 'NR==1{print $1}' |
| #Execute the script that access with SSH to the BBF-Adapter Pod |
| #Run the netopeer2-cli, set up it, and ask to the device-aggregation XML |
| ${rc} ${output}= Run and Return Rc and Output |
| ... expect ${pathToScript}/bbf_device_aggregation.exp ${exec_pod_name} |
| Log ${output} |
| #Verify if there are some error of connectivity with the Adapter Pod |
| ${expect}= Get Length ${output} |
| Run Keyword If ${expect} <= 100 |
| ... Fail Impossible to Reach the BBF-Adapter Pod (port-forward/key-exchange?) |
| #Copy From the Pod to the ${XMLDestPath} the XML file |
| Copy File From Pod ${namespace} app=bbf-adapter home/voltha/output.xml ${XMLDestPath} |
| |
| OLT XML update From BBF |
| [Documentation] Extract, running an except script, the XML that |
| ... represent all the Network viewed by the BBF-Adapter and |
| ... copy it to the ${XMLDestPath}. |
| [Arguments] ${dirXML} ${pathToScript} |
| Get BBF Device Aggregation ${NAMESPACE} ${dirXML} ${pathToScript} |
| ${oltes_bbf}= Get Olts From XML ${dirXML} |
| Set Global Variable ${oltes_bbf} |
| |
| ONU XML update From BBF |
| [Documentation] Extract, running an except script, the XML that |
| ... represent all the Network viewed by the BBF-Adapter and |
| ... copy it to the ${XMLDestPath}. |
| [Arguments] ${dirXML} ${pathToScript} |
| Get BBF Device Aggregation ${NAMESPACE} ${dirXML} ${pathToScript} |
| ${onus_bbf}= Get Onus From XML ${dirXML} |
| Set Global Variable ${onus_bbf} |
| |
| ALL DEVICES XML update From BBF |
| [Documentation] Extract, running an except script, the XML that |
| ... represent all the Network viewed by the BBF-Adapter and |
| ... copy it to the ${XMLDestPath}. |
| [Arguments] ${dirXML} ${pathToScript} |
| Get BBF Device Aggregation ${NAMESPACE} ${dirXML} ${pathToScript} |
| ${all_devices_bbf}= Get All Devices ${dirXML} |
| Set Global Variable ${all_devices_bbf} |
| |
| Get Devices By Type |
| [Documentation] Extract ALL the Devices viewed by the BBF-Adapter |
| ... that there are the type defined: OLT(bbf-dvct:olt), ONU(bbf-dvct:onu) |
| ... ${XML} is the path to XML file OR the XML itself. |
| ... Return a List of Defined Devices information |
| [Arguments] ${XML} ${typeAsk} |
| #Take the XML file o the XML itself |
| Log ${XML} |
| ${root}= Parse XML ${XML} |
| #Define a list of all the OLTs |
| @{bbf_olts_xml}= Create List |
| #Navigate in the XML to enter in the Devices and get all Devices in XML |
| @{device} = Get Elements ${root} devices/device |
| ${number_of_devices}= Get Length ${device} |
| #Run on all the devices |
| FOR ${I} IN RANGE 0 ${number_of_devices} |
| #Verify the correct Type of device that is declared |
| ${type}= Get Element Text ${device}[${I}] type |
| Continue For Loop If "${type}" != "${typeAsk}" |
| #Append the device with che correct type in the list |
| Append To List ${bbf_olts_xml} ${device}[${I}] |
| END |
| Log ${bbf_olts_xml} |
| [Return] ${bbf_olts_xml} |
| |
| Get Olts From XML |
| [Documentation] Extract ALL the OLTs viewed by the BBF-Adapter |
| ... ${XML} is the path to XML file OR the XML itself. |
| ... Return a List of OLTs information. |
| [Arguments] ${XML} |
| #Get from the XML all OLT |
| ${bbf_olts}= Get Devices By Type ${XML} bbf-dvct:olt |
| #Create a List of OLTs |
| @{bbf_olts_Info}= Create List |
| ${number_of_olts}= Get Length ${bbf_olts} |
| FOR ${I} IN RANGE 0 ${number_of_olts} |
| #Enter in the component where there are the information of the OLT |
| ${component}= Get Element ${bbf_olts}[${I}] data/hardware/component |
| #Get from the XML the data |
| ${name}= Get Element Text ${component} name |
| ${hardware_rev}= Get Element Text ${component} hardware-rev |
| ${firmware_rev}= Get Element Text ${component} firmware-rev |
| ${serial_number}= Get Element Text ${component} serial-num |
| ${mfg_name}= Get Element Text ${component} mfg-name |
| ${model_name}= Get Element Text ${component} model-name |
| ${admin_state}= Get Element Text ${component} state/admin-state |
| ${oper_state}= Get Element Text ${component} state/oper-state |
| |
| #Define a Dictionary that containe all the information about the OLT |
| #Need to modify when there are add in the XML the connect-state |
| ${bbf_olt} Create Dictionary |
| ... name ${name} |
| ... hardware_rev ${hardware_rev} |
| ... firmware_rev ${firmware_rev} |
| ... serial-num ${serial_number} |
| ... mfg-name ${mfg_name} |
| ... model-name ${model_name} |
| ... admin-state ${admin_state} |
| ... oper-state ${oper_state} |
| ... connect-state unknown |
| |
| Append To List ${bbf_olts_Info} ${bbf_olt} |
| END |
| Log ${bbf_olts_Info} |
| [Return] ${bbf_olts_Info} |
| |
| Get Onus From XML |
| [Documentation] Extract ALL the ONUs viewed by the BBF-Adapter |
| ... Return a List of ONUs information. |
| [Arguments] ${XML} |
| #Get all the devices of the specific type |
| ${bbf_onus}= Get Devices By Type ${XML} bbf-dvct:onu |
| #Create a list that will contain all the information of the ONUs |
| @{bbf_onus_Info}= Create List |
| #Run on the XML compose be ONUs information |
| ${number_of_onus}= Get Length ${bbf_onus} |
| FOR ${I} IN RANGE 0 ${number_of_onus} |
| #Enter in the component where there are the information of the ONU |
| ${component}= Get Element ${bbf_onus}[${I}] data/hardware/component |
| #Get from the XML the data |
| ${name}= Get Element Text ${component} name |
| ${parent}= Get Element Text ${component} parent |
| ${parent_rel_pos}= Get Element Text ${component} parent-rel-pos |
| ${hardware_rev}= Get Element Text ${component} hardware-rev |
| ${firmware_rev}= Get Element Text ${component} firmware-rev |
| ${serial_number}= Get Element Text ${component} serial-num |
| ${mfg_name}= Get Element Text ${component} mfg-name |
| ${model_name}= Get Element Text ${component} model-name |
| ${admin_state}= Get Element Text ${component} state/admin-state |
| ${oper_state}= Get Element Text ${component} state/oper-state |
| #Enter in the interfaces part |
| ${interfaces}= Get Element ${bbf_onus}[${I}] data/interfaces |
| #Retrive all the information about all the interface of the consider ONU |
| @{onu_interfaces}= Get Interfaces From Onu XML Interfaces ${interfaces} |
| |
| #Define a Dictionary that containe all the information about the OLT |
| #Need to modify when there are add in the XML the connect-state |
| #Need to modify when there are add in the XML the Onu-Reason |
| ${bbf_onu} Create Dictionary |
| ... name ${name} |
| ... parent-id ${parent} |
| ... parent-rel-pos ${parent_rel_pos} |
| ... hardware_rev ${hardware_rev} |
| ... firmware_rev ${firmware_rev} |
| ... serial-num ${serial_number} |
| ... mfg-name ${mfg_name} |
| ... model-name ${model_name} |
| ... admin-state ${admin_state} |
| ... oper-state ${oper_state} |
| ... connect-state unknown |
| ... onu-reason omci-flows-pushed |
| ... interfaces ${onu_interfaces} |
| |
| Append To List ${bbf_onus_Info} ${bbf_onu} |
| END |
| Log ${bbf_onus_Info} |
| [Return] ${bbf_onus_Info} |
| |
| Get Interfaces From Onu XML Interfaces |
| [Documentation] Extract ALL the Interfaces of a ONU viewed by the BBF-Adapter |
| ... Return a List of ONU Interfaces information |
| [Arguments] ${interfaces_bbf} |
| #Intereate on the Interfaces |
| @{interface}= Get Elements ${interfaces_bbf} interface |
| #Create a list of interface for each ONU |
| @{interfaces_Info}= Create List |
| ${number_of_interfaces}= Get Length ${interface} |
| FOR ${I} IN RANGE 0 ${number_of_interfaces} |
| #Get from the XML information about the interface |
| ${name}= Get Element Text ${interface}[${I}] name |
| ${type}= Get Element Text ${interface}[${I}] type |
| ${oper_status}= Get Element Text ${interface}[${I}] oper-status |
| #Define a Dictionary that contain all the information of single interface |
| ${onu_interface} Create Dictionary |
| ... name ${name} |
| ... type ${type} |
| ... oper_status ${oper_status} |
| #Appen interface |
| Append To List ${interfaces_Info} ${onu_interface} |
| END |
| Log ${interfaces_Info} |
| [Return] ${interfaces_Info} |
| |
| Get All Devices |
| [Documentation] Extract all the Device (OLTs and ONUS) in a unique List of Devices |
| [Arguments] ${XML} |
| ${onus_bbf}= Get Onus From XML ${XML} |
| ${olts_bbf}= Get Olts From XML ${XML} |
| ${all_devices_bbf}= Combine Lists ${onus_bbf} ${olts_bbf} |
| [Return] ${all_devices_bbf} |
| |
| Admin State Translation From IETF to VOLTHA |
| [Documentation] Allow to translate the IETF of a Admin-State to VOLTHA |
| [Arguments] ${ietf_admin_state} |
| #Remeber that exist in VOLTHA also Admini State with: Downloading_Image |
| #PREPROVISIONED is consider inside the DISABLED state |
| ${voltha_admin_state}= Run Keyword IF "${ietf_admin_state}"=="locked" |
| ... Set Variable DISABLED |
| ... ELSE |
| ... Run Keyword IF "${ietf_admin_state}"=="unlocked" |
| ... Set Variable ENABLED |
| ... ELSE |
| ... Set Variable UNKNOWN |
| Log ${voltha_admin_state} |
| [Return] ${voltha_admin_state} |
| |
| Create Device in BBF |
| [Arguments] ${device_id} |
| [Documentation] PlaceHolder Method to future Create Device from the BBF Adapter |
| Should Be True True |
| |
| Delete Device in BBF |
| [Arguments] ${device_id} |
| [Documentation] PlaceHolder Method to future Delete Device from the BBF Adapter |
| Should Be True True |
| |
| Enable Device in BBF |
| [Arguments] ${device_id} |
| [Documentation] PlaceHolder Method to future Enable Device from the BBF Adapter |
| Should Be True True |
| |
| Disable Device in BBF |
| [Arguments] ${device_id} |
| [Documentation] PlaceHolder Method to future Disable Device from the BBF Adapter |
| Should Be True True |
| |
| Admin State Translation From VOLTHA to IETF |
| [Documentation] Allow to translate the VOLTHA of a Admin-State to IETF Standard |
| [Arguments] ${voltha_admin_state} |
| #Remeber that exist in VOLTHA also Admini State with: Downloading_Image |
| ${ietf_admin_state}= Run Keyword IF "${voltha_admin_state}"=="DISABLED" |
| ... Set Variable locked |
| ... ELSE |
| ... Run Keyword IF "${voltha_admin_state}"=="PREPROVISIONED" |
| ... Set Variable locked |
| ... ELSE |
| ... Run Keyword IF "${voltha_admin_state}"=="ENABLED" |
| ... Set Variable unlocked |
| ... ELSE |
| ... Set Variable unknown |
| [Return] ${ietf_admin_state} |
| |
| Oper State Translation From IETF to VOLTHA |
| [Documentation] Allow to translate the IETF of a Oper-State to VOLTHA |
| [Arguments] ${ietf_oper_state} |
| #Remeber that exist in VOLTHA also Admini State with: Discovered and Activating and Failed |
| ${voltha_oper_state}= Run Keyword IF "${ietf_oper_state}"=="disable" |
| ... Set Variable RECONCILING_FAILED |
| ... ELSE |
| ... Run Keyword IF "${ietf_oper_state}"=="enabled" |
| ... Set Variable ACTIVE |
| ... ELSE |
| ... Run Keyword IF "${ietf_oper_state}"=="testing" |
| ... Set Variable TESTING |
| ... ELSE |
| ... Set Variable UNKNOWN |
| Log ${voltha_oper_state} |
| [Return] ${voltha_oper_state} |
| |
| Oper State Translation From VOLTHA to IETF |
| [Documentation] Allow to translate the VOLTHA of a Oper-State to IETF Standard |
| [Arguments] ${voltha_oper_state} |
| #Remeber that exist in VOLTHA also Admini State with: Discovered and Activating and Failed |
| ${ietf_oper_state}= Run Keyword IF "${voltha_oper_state}"=="RECONCILING_FAILED" |
| ... Set Variable disable |
| ... ELSE |
| ... Run Keyword IF "${voltha_oper_state}"=="ACTIVE" |
| ... Set Variable enabled |
| ... ELSE |
| ... Run Keyword IF "${voltha_oper_state}"=="TESTING" |
| ... Set Variable testing |
| ... ELSE |
| ... Set Variable unknown |
| Log ${ietf_oper_state} |
| [Return] ${ietf_oper_state} |
| |
| Connect State Translation From IETF to VOLTHA |
| [Documentation] Allow to translate the IETF of a Connect-State to VOLTHA |
| [Arguments] ${bbf_connect_state} |
| #Only REACHABLE because we don't know the IETF status |
| ${voltha_connect_state}= Set Variable REACHABLE |
| [Return] ${voltha_connect_state} |
| |
| Connect State Translation From VOLTHA to IETF |
| [Documentation] Allow to translate the VOLTHA of a Connect-State to IETF Standard |
| [Arguments] ${voltha_connect_state} |
| ${bbf_connect_state}= Set Variable unknown |
| [Return] ${bbf_connect_state} |
| |
| Validate Onu in BBF |
| [Documentation] Validate an ONU in BBF and its states |
| [Arguments] ${admin_state_voltha} ${oper_status_voltha} ${connect_status_voltha} |
| ... ${onu_serial_number} ${onu_reasons} |
| #Translate some states from VOLTHA to IETF to verify it in the BBF |
| ${admin_state}= Admin State Translation From VOLTHA to IETF ${admin_state_voltha} |
| ${oper_status}= Oper State Translation From VOLTHA to IETF ${oper_status_voltha} |
| #${connect_status_voltha}= Connect State Translation From VOLTHA to IETF ${connect_status_voltha} |
| #Define passed to understand if there are or not the consider ONU |
| ${passed}= Set Variable False |
| ${number_of_onus}= Get Length ${onus_bbf} |
| FOR ${I} IN RANGE 0 ${number_of_onus} |
| Continue For Loop If "${onu_serial_number}"!="${onus_bbf}[${I}][serial-num]" |
| #The ONU is in the BBF |
| ${passed}= Set Variable True |
| #Get all the information of the ONU |
| ${sn}= Set Variable ${onus_bbf}[${I}][serial-num] |
| ${astate}= Set Variable ${onus_bbf}[${I}][admin-state] |
| ${ostate}= Set Variable ${onus_bbf}[${I}][oper-state] |
| #To modify when will add |
| #${cstate}= ${onus_bbf}[${I}][connect-state] |
| ${oreason}= Set Variable ${onus_bbf}[${I}][onu-reason] |
| #Check if status is correct to consider the ONU in a correct setup state |
| Should Be True ${passed} No match found for ${sn} to validate device |
| Log ${passed} |
| Should Be Equal '${admin_state}' '${astate}' Device ${sn} admin_state != ${admin_state} |
| ... passed=False |
| Should Be Equal '${oper_status}' '${ostate}' Device ${sn} oper_status != ${oper_status} |
| ... passed=False |
| #To modify when will add |
| #Should Be Equal '${connect_status}' '${cstate}' Device ${sn} conn_status != ${connect_status} |
| #... passed=False |
| #Should Be Equal '${onu_reasons}' '${oreason}' Device ${sn} reason != ${onu_reasons} |
| #... passed=False |
| #Run Keyword If '${onu}' == 'True' Should Contain '${onu_reason}' '${mib_state}' |
| #... Device ${sn} mib_state incorrect (${mib_state}) passed=False |
| Log ${sn} |
| Log ${astate} |
| Log ${ostate} |
| #Log ${cstate} |
| #Log ${oreason} |
| END |
| #If false can not are the ONU or there are problem with the states status |
| Should Be True ${passed} BBF Problem with this ONU SN: ${onu_serial_number} |
| |
| Validate Olt in BBF |
| [Documentation] Verify if the Olts are present inside the XML of the BBF adapter |
| ... and if the states are correct. |
| [Arguments] ${admin_state_voltha} ${oper_status_voltha} ${connect_status_voltha} |
| ... ${olt_serial_number} ${olt_device_id} |
| #Translate some states from VOLTHA to IETF to verify it in the BBF |
| ${admin_state}= Admin State Translation From VOLTHA to IETF ${admin_state_voltha} |
| ${oper_status}= Oper State Translation From VOLTHA to IETF ${oper_status_voltha} |
| #${connect_status_voltha}= Connect State Translation From VOLTHA to IETF ${connect_status_voltha} |
| #Define passed to understand if there are or not the consider OLT |
| ${passed}= Set Variable False |
| ${number_of_oltes}= Get Length ${oltes_bbf} |
| FOR ${I} IN RANGE 0 ${number_of_oltes} |
| Continue For Loop If "${olt_serial_number}"!="${oltes_bbf}[${I}][serial-num]" |
| #The OLT is in the BBF |
| ${passed}= Set Variable True |
| #Get information of the OLT |
| ${sn}= Set Variable ${oltes_bbf}[${I}][serial-num] |
| ${astate}= Set Variable ${oltes_bbf}[${I}][admin-state] |
| ${ostate}= Set Variable ${oltes_bbf}[${I}][oper-state] |
| #To modify when will add |
| #${cstate}= ${oltes_bbf}[${I}][connect-state] |
| #Check all the state status |
| Should Be True ${passed} No match found for ${sn} to validate device |
| Log ${passed} |
| Should Be Equal '${admin_state}' '${astate}' Device ${sn} admin_state != ${admin_state} |
| ... passed=False |
| Should Be Equal '${oper_status}' '${ostate}' Device ${sn} oper_status != ${oper_status} |
| ... passed=False |
| #To modify when will add |
| #Should Be Equal '${connect_status}' '${cstate}' Device ${sn} conn_status != ${connect_status} |
| #... passed=False |
| END |
| #If false can not are the OLT or there are problem with the states status |
| Should Be True ${passed} BBF Problem with this ONU SN: ${olt_serial_number} |
| |
| Validate Device in BBF |
| [Documentation] Verify if the Device (Olt or Onu) are present inside the XML of the BBF adapter |
| ... and if the states are correct. |
| [Arguments] ${admin_state_voltha} ${oper_status_voltha} ${connect_status_voltha} |
| ... ${serial_number} ${device_id} ${isONU} |
| Run Keyword If ${isONU} |
| ... Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Onu in BBF ${admin_state_voltha} ${oper_status_voltha} ${connect_status_voltha} |
| ... ${serial_number} ${device_id} |
| ... ELSE |
| ... Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF ${admin_state_voltha} ${oper_status_voltha} ${connect_status_voltha} |
| ... ${serial_number} ${device_id} |
| |
| Validate ONUs After OLT Disable in BBF |
| [Documentation] Validates the ONUs state in BBF, ONUs port state in ONOS |
| ... and that pings do not succeed After corresponding OLT is Disabled |
| [Arguments] ${olt_serial_number} |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} ${src['uni_id']} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} ${src['uni_id']} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds ${timeout} 2s |
| ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ${onu_reasons}= Create List omci-flows-deleted |
| Run Keyword If ${supress_add_subscriber} Append To List ${onu_reasons} stopping-openomci |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Onu in BBF ENABLED DISCOVERED |
| ... UNREACHABLE ${src['onu']} ${onu_reasons} |
| END |
| |
| Validate Olt Disabled in BBF |
| [Documentation] Validates the ONUs state in BBF, ONUs port state in ONOS |
| ... and that pings do not succeed After corresponding OLT is Disabled |
| [Arguments] ${olt_serial_number} ${olt_device_id} |
| Validate Olt in BBF admin_state_voltha=DISABLED oper_status_voltha=UNKNOWN |
| ... connect_status_voltha=REACHABLE olt_serial_number=${olt_serial_number} |
| ... olt_device_id=${olt_device_id} |
| |
| Validate Device Removed in BBF |
| [Documentation] Verify if the device with that ${serial_number}, has been removed |
| [Arguments] ${device_serial_number} |
| ${eliminated}= Set Variable True |
| ${number_of_devices}= Get Length ${all_devices_bbf} |
| FOR ${I} IN RANGE 0 ${number_of_devices} |
| Continue For Loop If "${device_serial_number}"!="${all_devices_bbf}[${I}][serial-num]" |
| ${eliminated}= Set Variable False |
| END |
| Should Be True ${eliminated} Device with ${device_serial_number} not eliminated |
| |
| Validate all ONUS for OLT Removed in BBF |
| [Arguments] ${olt_serial_number} |
| [Documentation] Verifys that all the ONUS for OLT ${serial_number}, has been removed |
| @{removed_onu_list}= Create List |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| Continue For Loop If "${olt_serial_number}"!="${src['olt']}" |
| ${removed_onu_seria_number}= Set Variable ${src['onu']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device Removed in BBF ${removed_onu_seria_number} |
| Append To List ${removed_onu_list} ${removed_onu_seria_number} |
| END |
| Log ${removed_onu_list} |
| |
| Get Device ID From SN in BBF |
| [Documentation] Retrive from the XML the Device Id of a Device |
| ... using the Serial Number |
| [Arguments] ${device_serial_number} |
| ${Device_ID}= Set Variable 0 |
| ${number_of_devices}= Get Length ${all_devices_bbf} |
| FOR ${I} IN RANGE 0 ${number_of_devices} |
| Continue For Loop If "${device_serial_number}"!="${all_devices_bbf}[${I}][serial-num]" |
| ${Device_ID}= Set Variable ${all_devices_bbf}[${I}][name] |
| Log ${Device_ID} |
| END |
| [Return] ${Device_ID} |
| |
| Correct representation check VOLTHA-IETF |
| [Documentation] Check if all the information the VOLTHA have about a device |
| ... is a correct representation of the device in BBF-Adapter |
| ... Do to Ambiguity from Stats in IETF and VOLTHA is not possible to do |
| ... the reverse test. |
| [Arguments] ${device_serial_number} ${isONU} |
| ${cmd}= Catenate voltctl -c ${VOLTCTL_CONFIG} device list | grep ${device_serial_number} |
| ${rc} ${rest}= Run and Return Rc and Output ${cmd} |
| Should Not Be Empty ${rest} Could not find device in VOLTHA |
| Run Keyword If ${isONU} |
| ... Correct Representation check ONU Voltha-IETF ${rest} |
| ... ELSE |
| ... Correct Representation check OLT Voltha-IETF ${rest} |
| |
| Correct Representation check ONU Voltha-IETF |
| [Documentation] Check if all the information the VOLTHA have about a device |
| ... is a correct representation of the device in BBF-Adapter |
| ... Do to Ambiguity from Stats in IETF and VOLTHA is not possible to do |
| ... the reverse test. |
| [Arguments] ${rest} |
| ${rest} ${onu_reason} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${connect_state} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${oper_state} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${admin_state} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${serial_number} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${parent_id} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${root} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${id} ${type} = Split String From Right ${rest} ${SPACE} max_split=1 |
| |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Onu in BBF ${admin_state} ${oper_state} ${connect_state} |
| ... ${serial_number} ${onu_reason} |
| |
| Correct Representation check OLT Voltha-IETF |
| [Documentation] Check if all the information the VOLTHA have about a device |
| ... is a correct representation of the device in BBF-Adapter |
| ... Do to Ambiguity from Stats in IETF and VOLTHA is not possible to do |
| ... the reverse test. |
| [Arguments] ${rest} |
| ${rest} ${connect_state} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${oper_state} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${admin_state} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${serial_number} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${parent_id} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${rest} ${root} = Split String From Right ${rest} ${SPACE} max_split=1 |
| ${id} ${type} = Split String From Right ${rest} ${SPACE} max_split=1 |
| |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Olt in BBF ${admin_state} ${oper_state} ${connect_state} |
| ... ${serial_number} ${id} |