| # Copyright 2022 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Use bbsim-kind-dt-1OLTx1PONx2ONU.yaml |
| |
| *** Settings *** |
| Documentation Test of try to catch memory leak in voltha components. |
| Suite Setup Setup Suite |
| Suite Teardown Teardown Suite |
| Test Setup Setup |
| Test Teardown Teardown |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Library ../../libraries/utility.py WITH NAME utility |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../libraries/onu_utilities.robot |
| Resource ../../variables/variables.robot |
| |
| *** Variables *** |
| ${NAMESPACE} voltha |
| ${INFRA_NAMESPACE} default |
| ${timeout} 60s |
| ${of_id} 0 |
| ${logical_id} 0 |
| ${has_dataplane} True |
| ${external_libs} True |
| ${teardown_device} True |
| ${scripts} ../../scripts |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| # determines the environment workflow: DT, TT or ATT (default) |
| # example: -v workflow:DT |
| ${workflow} ATT |
| # KV Store Prefix |
| # example: -v kvstoreprefix:voltha/voltha_voltha |
| ${kvstoreprefix} voltha/voltha_voltha |
| # flag debugmode is used, if true timeout calculation various, can be passed via the command line too |
| # example: -v debugmode:True |
| ${debugmode} False |
| # logging flag to enable Collect Logs, can be passed via the command line too |
| # example: -v logging:True |
| ${logging} False |
| # if True execution will be paused before clean up, only use in case of manual testing, do not use in ci pipeline! |
| # example: -v pausebeforecleanup:True |
| ${pausebeforecleanup} False |
| # if True some outputs to console are done during running tests e.g. long duration flow test |
| # example: -v print2console:True |
| ${print2console} False |
| # if True etcd check will be executed in test case teardown, if False etcd check will be executed in suite teardown |
| # example: -v etcdcheckintestteardown:False |
| ${etcdcheckintestteardown} True |
| ${data_dir} ../data |
| # number of iterations |
| # example: -v iterations:10 |
| ${iterations} 50 |
| # address of Prometheus |
| # example: -v prometheusaddr:0.0.0.0 |
| ${prometheusaddr} 0.0.0.0 |
| # port of Prometheus |
| # example: -v prometheusport:31301 |
| ${prometheusport} 31301 |
| |
| # flag to choose the subscriber provisioning command type in ONOS |
| # TT often provision a single services for a subscriber (eg: hsia, voip, ...) one after the other. |
| # if set to True, command used is "volt-add-subscriber-unitag" |
| # if set to False, comand used is "volt-add-subscriber-access" |
| ${unitag_sub} False |
| |
| *** Test Cases *** |
| Memory Leak Test Openonu Go Adapter |
| [Documentation] Test of try to catch memory leak in Openonu Go Adapter for all three workflows, ATT, DT and TT |
| ... Multiple run of Flow and ONU setup and teardown to try to catch memory leak. |
| ... Setup OLT and one (first) ONU, both will kept over the whole test |
| ... Setup a second ONU and do following in specified loops (iterations): |
| ... - do workflow related sanity test (bring up onu to omci flows pushed and setup flows) |
| ... - remove flows |
| ... - delete ONU |
| ... - wait for onu auto detect |
| ... Attention: Due VOL-4703 is not corrected memory leak tests will run in pipeline for DT workflow only! |
| ... This is a temporaly workaround only! Has to be checked after introduction of voltha-go-controller. |
| [Tags] functionalMemoryLeak MemoryLeakTestOnuGo |
| [Setup] Run Keywords Start Logging MemoryLeakTestOnuGo |
| ... AND Append Memory Consumption To File isTest=True action=test_start |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| ${output_file_onu}= Catenate SEPARATOR=/ ${OUTPUT DIR} MemoryConsumptionsOpenOnuAdapterOnuTest.txt |
| Create File ${output_file_onu} This file contains the memory consumptions of openonu adapter. |
| Append To File ${output_file_onu} \r\nTest: ${TEST NAME} |
| ${start_mem_consumption_onu}= Get And Write Memory Consumption Per Container To File adapter-open-onu ${NAMESPACE} |
| ... ${output_file_onu} Start settling_memory=True |
| ${Device_Setup}= Set Variable True |
| Set Global Variable ${Device_Setup} |
| Setup |
| Get And Write Memory Consumption Per Container To File adapter-open-onu ${NAMESPACE} |
| ... ${output_file_onu} Setup-OLT #settling_memory=True |
| Append Memory Consumption To File isTest=True action=test_setup |
| # Start first ONU |
| ${src_onu_1}= Set Variable ${hosts.src[${0}]} |
| ${bbsim_pod}= Get Pod Name By Label ${NAMESPACE} release bbsim0 |
| Power On ONU ${NAMESPACE} ${bbsim_pod} ${src_onu_1['onu']} |
| ${onu_reason}= Set Variable If "${workflow}"=="DT" initial-mib-downloaded |
| ... "${workflow}"=="TT" initial-mib-downloaded |
| ... "${workflow}"=="ATT" omci-flows-pushed |
| ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= |
| ... Map State ${onu_reason} |
| Wait Until Keyword Succeeds ${timeout} 1s |
| ... Validate Device ${admin_state} ${oper_status} ${connect_status} |
| ... ${src_onu_1['onu']} onu=True onu_reason=${onu_state} |
| ${setup_mem_consumption_onu}= Get And Write Memory Consumption Per Container To File adapter-open-onu ${NAMESPACE} |
| ... ${output_file_onu} Setup-ONU-1 settling_memory=True |
| # Start second ONU |
| ${src_onu_2}= Set Variable ${hosts.src[${1}]} |
| ${bbsim_pod}= Get Pod Name By Label ${NAMESPACE} release bbsim0 |
| Power On ONU ${NAMESPACE} ${bbsim_pod} ${src_onu_2['onu']} |
| ${onu_reason}= Set Variable If "${workflow}"=="DT" initial-mib-downloaded |
| ... "${workflow}"=="TT" initial-mib-downloaded |
| ... "${workflow}"=="ATT" omci-flows-pushed |
| ${admin_state} ${oper_status} ${connect_status} ${onu_state_nb} ${onu_state}= |
| ... Map State ${onu_reason} |
| Wait Until Keyword Succeeds ${timeout} 1s |
| ... Validate Device ${admin_state} ${oper_status} ${connect_status} |
| ... ${src_onu_2['onu']} onu=True onu_reason=${onu_state} |
| Get And Write Memory Consumption Per Container To File adapter-open-onu ${NAMESPACE} ${output_file_onu} Setup-ONU-2 |
| Append Memory Consumption To File isTest=True action=test_setup_onu2 |
| FOR ${I} IN RANGE 1 ${iterations} + 1 |
| Run Keyword If ${print2console} Log \r\nStart iteration ${I} of ${iterations}. console=yes |
| Run Keyword If "${workflow}"=="DT" Perform Sanity Test DT |
| ... ELSE IF "${workflow}"=="TT" Perform Sanity Tests TT |
| ... ELSE Perform Sanity Test |
| Sleep 5s |
| Run Keyword If ${print2console} Log Remove Flows. console=yes |
| # Remove Flows |
| ${src}= Set Variable ${hosts.src[1]} |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${src_onu_2['olt']} |
| ${onu_sn_2}= Set Variable ${src_onu_2['onu']} |
| ${onu_port_2}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${onu_sn_2} |
| ... ${of_id} ${src_onu_2['uni_id']} |
| Remove Flows Conditional ${unitag_sub} ${onu_sn_2} ${of_id} ${onu_port_2} |
| Run Keyword If ${print2console} Log Check Flows removed. console=yes |
| # Check All Flows Removed |
| ${expected_flows_onu}= Set Variable If "${workflow}"=="ATT" 1 0 |
| Wait Until Keyword Succeeds ${timeout} 2s Validate number of flows ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... ${expected_flows_onu} ${of_id} any ${onu_port_2} |
| # Delete Device |
| Run Keyword If ${print2console} Log Get ONU Device IDs. console=yes |
| ${onu_device_id}= Get Device ID From SN ${onu_sn_2} |
| Run Keyword If ${print2console} Log Delete ONU. (device id: ${onu_device_id}) console=yes |
| Wait Until Keyword Succeeds ${timeout} 1s Delete Device ${onu_device_id} |
| Run Keyword If ${print2console} Log Wait for ONU come back. console=yes |
| ${onu_device_id_list}= Create List ${onu_device_id} |
| Wait Until Keyword Succeeds ${timeout} 1s Check for new ONU Device IDs ${onu_device_id_list} |
| ${list_onus} Create List |
| Build ONU SN List ${list_onus} |
| Wait Until Keyword Succeeds ${timeout} 1s Check all ONU OperStatus ${list_onus} ACTIVE |
| Build ONU SN List ${list_onus} |
| ${onu_reason}= Set Variable If "${workflow}"=="DT" initial-mib-downloaded |
| ... "${workflow}"=="TT" initial-mib-downloaded |
| ... "${workflow}"=="ATT" omci-flows-pushed |
| Wait Until Keyword Succeeds ${timeout} 1s |
| ... Validate Device ENABLED ACTIVE REACHABLE ${onu_sn_2} onu_reason=${onu_reason} onu=True |
| ${formatedIt}= Format String {:>3} ${I} |
| Get And Write Memory Consumption Per Container To File adapter-open-onu ${NAMESPACE} ${output_file_onu} |
| ... Iteration ${formatedIt} |
| END |
| # Switch off second ONU |
| Power Off ONU ${NAMESPACE} ${bbsim_pod} ${src_onu_2['onu']} |
| Wait Until Keyword Succeeds 500s 30s |
| ... Validate Memory Consumptions adapter-open-onu ${NAMESPACE} ${setup_mem_consumption_onu} ${output_file_onu} |
| ... out_string=Validate |
| [Teardown] Run Keywords Printout ONU Serial Number and Device Id print2console=${print2console} |
| ... AND Run Keyword If ${logging} Get Logical Id of OLT |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Teardown Test |
| ... AND Append Memory Consumption To File isTest=True compare_to=test_setup |
| ... AND Run Keyword And Ignore Error Wait Until Keyword Succeeds 300s 30s |
| ... Validate Memory Consumptions adapter-open-onu ${NAMESPACE} ${start_mem_consumption_onu} ${output_file_onu} |
| ... AND Append Memory Consumption To File isTest=True compare_to=test_start |
| ... AND Stop Logging MemoryLeakTestOnuGo |
| |
| Memory Leak Test Openolt Adapter |
| [Documentation] Test of try to catch memory leak in Openolt Adapter for all three workflows, ATT, DT and TT |
| ... Multiple run of OLT setup and teardown to try to catch memory leak. |
| ... - do workflow related sanity test (bring up onu to omci flows pushed and setup flows) |
| ... - delete OLT devices |
| ... - wait for OLT is removed |
| ... - add and enable OLT again |
| ... - wait for ONUs available again |
| ... Hint: Also memory consumptions of Openonu GO Adapter will be validated! |
| ... Hint: default timePower On ONU Device ${NAMESPACE}out in BBSim to mimic OLT reboot is 60 seconds! |
| ... This behaviour of BBSim can be modified by 'oltRebootDelay: 60' in BBSim section of helm chart or |
| ... used values.yaml during 'voltha up'. |
| ... Attention: Due VOL-4703 is not corrected memory leak tests will run in pipeline for DT workflow only! |
| ... This is a temporaly workaround only! Has to be checked after introduction of voltha-go-controller. |
| [Tags] functionalMemoryLeak MemoryLeakTestOlt |
| [Setup] Run Keywords Start Logging MemoryLeakTestOlt |
| ... AND Append Memory Consumption To File isTest=True action=test_start |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| ${output_file_olt}= Catenate SEPARATOR=/ ${OUTPUT DIR} MemoryConsumptionsOpenOltAdapterOltTest.txt |
| Create File ${output_file_olt} This file contains the memory consumptions of openolt adapter. |
| Append To File ${output_file_olt} \r\nTest: ${TEST NAME} |
| ${output_file_onu}= Catenate SEPARATOR=/ ${OUTPUT DIR} MemoryConsumptionsOpenOnuAdapterOltTest.txt |
| Create File ${output_file_onu} This file contains the memory consumptions of openonu adapter. |
| Append To File ${output_file_onu} \r\nTest: ${TEST NAME} |
| Run Keyword If ${print2console} Log \r\nStart ${iterations} iterations. console=yes |
| ${start_mem_consumption_olt}= Get And Write Memory Consumption Per Container To File adapter-open-olt ${NAMESPACE} |
| ... ${output_file_olt} Start settling_memory=True |
| ${start_mem_consumption_onu}= Get And Write Memory Consumption Per Container To File adapter-open-onu ${NAMESPACE} |
| ... ${output_file_onu} Start |
| ${Device_Setup}= Set Variable True |
| Set Global Variable ${Device_Setup} |
| Setup |
| Power On ONU Device ${NAMESPACE} |
| ${setup_mem_consumption_olt}= Get And Write Memory Consumption Per Container To File adapter-open-olt ${NAMESPACE} |
| ... ${output_file_olt} Setup settling_memory=True |
| Append Memory Consumption To File isTest=True action=test_setup |
| Get And Write Memory Consumption Per Container To File adapter-open-onu ${NAMESPACE} ${output_file_onu} Setup |
| FOR ${I} IN RANGE 1 ${iterations} + 1 |
| Run Keyword If ${print2console} Log \r\nStart iteration ${I} of ${iterations}. console=yes |
| Run Keyword If "${workflow}"=="DT" Perform Sanity Test DT |
| ... ELSE IF "${workflow}"=="TT" Perform Sanity Tests TT |
| ... ELSE Perform Sanity Test |
| Sleep 5s |
| Run Keyword If ${print2console} Log Delete OLTs. console=yes |
| Delete Devices In Voltha Type=openolt |
| Run Keyword If ${print2console} Log Check OLTs removed. console=yes |
| Wait Until Keyword Succeeds ${timeout} 1s Test Empty Device List |
| Sleep 20s |
| Run Keyword If ${print2console} Log Add OLTs (calling Setup). console=yes |
| Setup |
| Power On ONU Device ${NAMESPACE} |
| Run Keyword If ${print2console} Log Wait for ONUs come back. console=yes |
| ${list_onus} Create List |
| Build ONU SN List ${list_onus} |
| Wait Until Keyword Succeeds ${timeout} 1s Check all ONU OperStatus ${list_onus} ACTIVE |
| Build ONU SN List ${list_onus} |
| ${onu_reason}= Set Variable If "${workflow}"=="DT" initial-mib-downloaded |
| ... "${workflow}"=="TT" initial-mib-downloaded |
| ... "${workflow}"=="ATT" omci-flows-pushed |
| Wait Until Keyword Succeeds ${timeout} 1s |
| ... Validate ONU Devices ENABLED ACTIVE REACHABLE ${list_onus} onu_reason=${onu_reason} |
| ${formatedIt}= Format String {:>3} ${I} |
| Get And Write Memory Consumption Per Container To File adapter-open-olt ${NAMESPACE} ${output_file_olt} |
| ... Iteration ${formatedIt} |
| Get And Write Memory Consumption Per Container To File adapter-open-onu ${NAMESPACE} ${output_file_onu} |
| ... Iteration ${formatedIt} |
| END |
| Wait Until Keyword Succeeds 500s 30s |
| ... Validate Memory Consumptions adapter-open-olt ${NAMESPACE} ${setup_mem_consumption_olt} ${output_file_onu} |
| ... out_string=Validate |
| [Teardown] Run Keywords Printout ONU Serial Number and Device Id print2console=${print2console} |
| ... AND Run Keyword If ${logging} Get Logical Id of OLT |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Teardown Test |
| ... AND Append Memory Consumption To File isTest=True compare_to=test_setup |
| ... AND Run Keyword And Ignore Error Wait Until Keyword Succeeds 300s 30s |
| ... Validate Memory Consumptions adapter-open-olt ${NAMESPACE} ${start_mem_consumption_olt} ${output_file_olt} |
| ... AND Validate Memory Consumptions adapter-open-onu ${NAMESPACE} ${start_mem_consumption_onu} ${output_file_onu} |
| ... AND Append Memory Consumption To File isTest=True compare_to=test_start |
| ... AND Stop Logging MemoryLeakTestOlt |
| |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Set up the test suite |
| Start Logging Setup or Teardown Setup-${SUITE NAME} |
| ${LogInfo}= Catenate |
| ... \r\nPassed arguments: |
| ... debugmode:${debugmode}, logging:${logging}, pausebeforecleanup:${pausebeforecleanup}, |
| ... print2console:${print2console}, workflow:${workflow}, kvstoreprefix:${kvstoreprefix}, |
| ... iterations:${iterations} |
| Log ${LogInfo} console=yes |
| Create Global Memory Consumption File |
| ${Device_Setup}= Set Variable False |
| Set Global Variable ${Device_Setup} |
| ${Start_Time}= Get Time epoch |
| Set Global Variable ${Start_Time} |
| Common Test Suite Setup |
| # set tech profiles |
| ${preload_tech_profile}= Set Variable If ${unitag_sub} and "${workflow}"=="TT" and not ${has_dataplane} True False |
| Set Suite Variable ${preload_tech_profile} |
| Run Keyword If ${preload_tech_profile} Set Tech Profile TT-HSIA ${INFRA_NAMESPACE} 64 |
| Run Keyword If ${preload_tech_profile} Set Tech Profile TT-VoIP ${INFRA_NAMESPACE} 65 |
| Run Keyword If ${preload_tech_profile} Set Tech Profile TT-multi-uni-MCAST-AdditionalBW-None ${INFRA_NAMESPACE} 66 |
| # delete etcd MIB Template Data |
| Delete MIB Template Data ${INFRA_NAMESPACE} |
| # delete etcd onu data |
| Delete ONU Go Adapter ETCD Data namespace=${INFRA_NAMESPACE} validate=True |
| Run Keyword If ${logging} Collect Logs |
| Stop Logging Setup or Teardown Setup-${SUITE NAME} |
| |
| Teardown Suite |
| [Documentation] Replaces the Suite Teardown in utils.robot. |
| ... Cleans up and checks all ONU ports disabled in ONOS. |
| ... Furthermore gives the possibility to pause the execution. |
| Start Logging Setup or Teardown Teardown-${SUITE NAME} |
| Append Memory Consumption To File compare_to=suite_setup |
| ${End_Time}= Get Time epoch |
| FOR ${container} IN @{list_of_container} |
| ${mem_consumption}= utility.get_memory_consumptions_range ${prometheusaddr}:${prometheusport} ${container} |
| ... ${namespace} ${Start_Time} ${End_Time} |
| Write Memory Consumption File Per Container ${container} ${mem_consumption} |
| END |
| Run Keyword If ${pausebeforecleanup} Import Library Dialogs |
| Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up! |
| Run Keyword If ${pausebeforecleanup} Log ${consumption_max} Teardown will be continued... console=yes |
| Run Keyword If ${teardown_device} and ${Device_Setup} Delete All Devices and Verify |
| Run Keyword Unless ${etcdcheckintestteardown} Wait Until Keyword Succeeds ${timeout} 1s |
| ... Validate Onu Data In Etcd ${INFRA_NAMESPACE} 0 ${kvstoreprefix} without_pm_data=False |
| Run Keyword If ${Device_Setup} Wait for Ports in ONOS for all OLTs ${ONOS_SSH_IP} ${ONOS_SSH_PORT} 0 BBSM ${timeout} |
| Run Keyword If ${logging} Collect Logs |
| Stop Logging Setup or Teardown Teardown-${SUITE NAME} |
| Close All ONOS SSH Connections |
| Set Suite Variable ${TechProfile} ${EMPTY} |
| Run Keyword If ${preload_tech_profile} Remove Tech Profile ${INFRA_NAMESPACE} 64 |
| Run Keyword If ${preload_tech_profile} Remove Tech Profile ${INFRA_NAMESPACE} 65 |
| Run Keyword If ${preload_tech_profile} Remove Tech Profile ${INFRA_NAMESPACE} 66 |
| |
| Teardown Test |
| [Documentation] Post-test Teardown |
| # log ONOS flows after remove check |
| ${flow}= Run Keyword If "${TEST STATUS}"=="FAIL" Execute ONOS CLI Command use single connection |
| ... ${ONOS_SSH_IP} ${ONOS_SSH_PORT} flows -s any ${of_id} |
| Run Keyword If "${TEST STATUS}"=="FAIL" Log ${flow} |
| Run Keyword If ${pausebeforecleanup} Import Library Dialogs |
| Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up! |
| Run Keyword If ${pausebeforecleanup} Log Teardown will be continued... console=yes |
| Run Keyword If ${teardown_device} and ${Device_Setup} Delete All Devices and Verify |
| # delete etcd MIB Template Data |
| Delete MIB Template Data ${INFRA_NAMESPACE} |
| # check etcd data are empty |
| Run Keyword If ${etcdcheckintestteardown} Wait Until Keyword Succeeds ${timeout} 1s |
| ... Validate Onu Data In Etcd ${INFRA_NAMESPACE} 0 ${kvstoreprefix} without_pm_data=False |
| Sleep 5s |
| |
| Create Global Memory Consumption File |
| [Documentation] Creates global memory consumption file and read the start values |
| ${list_of_container}= Create List voltha ofagent adapter-open-olt adapter-open-onu |
| Set Global Variable ${list_of_container} |
| ${global_output_file}= Catenate SEPARATOR=/ ${OUTPUT DIR} MemoryConsumptions${workflow}.txt |
| Create File ${global_output_file} This file contains the memory consumptions of all voltha adapter of workflow ${workflow}. |
| Set Global Variable ${global_output_file} |
| ${time}= Get Time |
| Append To File ${global_output_file} \r\n------------------------------------------------------ |
| Append To File ${global_output_file} \r\nMemory consumptions Suite Setup at ${time} |
| Append To File ${global_output_file} \r\n------------------------------------------------------ |
| &{suite_setup} Create Dictionary |
| FOR ${container} IN @{list_of_container} |
| ${mem_consumption}= Append Memory Consumption Per Container To File ${container} |
| Set To Dictionary ${suite_setup} ${container} ${mem_consumption} |
| END |
| &{memory_consumption_dict} Create Dictionary suite_setup ${suite_setup} |
| Set Global Variable ${memory_consumption_dict} |
| |
| Append Memory Consumption To File |
| [Documentation] Appends data to global memory consumption file per container |
| [Arguments] ${isTest}=False ${action}=${EMPTY} ${output_file}=${global_output_file} ${compare_to}=${EMPTY} |
| ${time}= Get Time |
| ${TestOrSuite} Set Variable If ${isTest} Test Suite |
| ${SetupOrTeardown} Set Variable If "${action}"!="${EMPTY}" Setup/Start (${action}) Teardown |
| Append To File ${global_output_file} \r\n------------------------------------------------------ |
| Append To File ${global_output_file} \r\nMemory consumptions ${TestOrSuite} ${SetupOrTeardown} at ${time} |
| Run Keyword If ${isTest} Append To File ${global_output_file} \r\nTest: ${TEST NAME} |
| Append To File ${global_output_file} \r\n------------------------------------------------------ |
| &{test_setup} Create Dictionary |
| FOR ${container} IN @{list_of_container} |
| ${mem_consumption}= Append Memory Consumption Per Container To File ${container} output_file=${output_file} |
| ... compare_to=${compare_to} |
| Run Keyword If "${action}"!="${EMPTY}" Set To Dictionary ${test_setup} ${container} ${mem_consumption} |
| END |
| Run Keyword If "${action}"!="${EMPTY}" Set To Dictionary ${memory_consumption_dict} ${action} ${test_setup} |
| Run Keyword If "${action}"!="${EMPTY}" Set Global Variable ${memory_consumption_dict} |
| |
| Append Memory Consumption Per Container To File |
| [Documentation] Appends data to global memory consumption file per container |
| [Arguments] ${container} ${namespace}=${NAMESPACE} ${output_file}=${global_output_file} ${compare_to}=${EMPTY} |
| ${mem_consumption}= Wait Until Keyword Succeeds 300s 5s |
| ... Get Memory Consumptions ${prometheusaddr} ${prometheusport} ${container} ${namespace} |
| ${formated_mem}= Format String {:>10} ${mem_consumption} |
| ${prestring}= Catenate \r\nMemory consumptions of ${container} |
| ${formated_prestring}= Format String {:<43} ${prestring} |
| ${poststring}= Run Keyword If "${compare_to}"!="${EMPTY}" Compare Memory Consumptions ${mem_consumption} |
| ... ${container} ${compare_to} |
| ... ELSE Set Variable ${EMPTY} |
| ${out_string}= Catenate ${formated_prestring} : ${formated_mem} Bytes ${poststring} |
| Append To File ${output_file} ${out_string} |
| [return] ${mem_consumption} |
| |
| Compare Memory Consumptions |
| [Documentation] Compares the current memory consumptions with the compare-to value of passed container and |
| ... creates corresponding string. |
| [Arguments] ${mem_consumption} ${container} ${compare_to} |
| ${compare_value}= Get From Dictionary ${memory_consumption_dict['${compare_to}']} ${container} |
| ${diff_value}= Evaluate ${mem_consumption}-${compare_value} |
| ${percentage_value}= Evaluate 100*${mem_consumption}/${compare_value} |
| ${percentage_value}= Convert To Number ${percentage_value} 2 |
| ${formated_start}= Format String {:>10} ${compare_value} |
| ${formated_diff}= Format String {:>10} ${diff_value} |
| ${formated_perc}= Format String {:>7} ${percentage_value} |
| ${out_string}= Catenate : Corresponds ${formated_perc}% compared to ${compare_to} (${formated_start} Bytes) : |
| ... Difference: ${formated_diff} Bytes |
| [return] ${out_string} |
| |
| Get And Write Memory Consumption Per Container To File |
| [Documentation] Gets and write current memory consumptions to memory consumption file per container |
| [Arguments] ${container} ${namespace} ${output_file} ${addstring}=${EMPTY} ${settling_memory}=False |
| ${mem_consumption}= Run Keyword If ${settling_memory} Settling Memory Consumptions ${prometheusaddr} |
| ... ${prometheusport} ${container} ${namespace} |
| ... ELSE Wait Until Keyword Succeeds 60s 5s Get Memory Consumptions ${prometheusaddr} ${prometheusport} |
| ... ${container} ${namespace} |
| ${time}= Get Time |
| ${formated_mem}= Format String {:>10} ${mem_consumption} |
| ${prestring}= Catenate Memory consumptions of ${container} ${addstring} |
| ${formated_prestring}= Format String {:<54} ${prestring} |
| ${out_string}= Catenate \r\n${formated_prestring} : ${formated_mem} Bytes at ${time} |
| Append To File ${output_file} ${out_string} |
| Run Keyword If ${print2console} Log ${formated_prestring} : ${formated_mem} Bytes at ${time} console=yes |
| [return] ${mem_consumption} |
| |
| Check for new ONU Device IDs |
| [Documentation] Checks that no old onu device ids stay |
| [Arguments] ${old_device_ids} |
| ${new_device_ids}= Get ONUs Device IDs from Voltha |
| Should Not Be Empty ${new_device_ids} No new ONU device IDs |
| FOR ${item} IN @{old_device_ids} |
| List Should Not Contain Value ${new_device_ids} ${item} Old device id ${item} still present. |
| END |
| |
| Validate Memory Consumptions |
| [Documentation] Validates memory consumptions of passed POD |
| [Arguments] ${container} ${namespace} ${start_value} ${output_file} ${out_string}=Teardown |
| ${mem_consumption}= Get And Write Memory Consumption Per Container To File ${container} ${namespace} |
| ... ${output_file} ${out_string} |
| ${mem_consumption}= Convert To Number ${mem_consumption} 1 |
| ${upper_bound}= Evaluate (${start_value} + (${start_value}*0.175)) |
| Should Be True ${upper_bound} >= ${mem_consumption} |
| |
| Settling Memory Consumptions |
| [Documentation] Delivers memory consumptions of passed POD after memory consumptions are leveled. |
| ... - collecting memory consumption at least about 5 minutes, but max 20 minutes |
| ... - built average of memory consumtions |
| ... - wait current value does not deviate from the average by more than 12%. |
| ... - deliver average value value |
| [Arguments] ${prometheusaddr} ${prometheusport} ${container} ${namespace} |
| @{consumption_list}= Create List |
| ${consumption_sum}= Set Variable 0 |
| ${consumption_max}= Set Variable 0 |
| ${average_value}= Set Variable 0 |
| FOR ${index} IN RANGE 1 21 |
| ${current_consumptions}= Get Memory Consumptions ${prometheusaddr} ${prometheusport} ${container} ${namespace} |
| Append To List ${consumption_list} ${current_consumptions} |
| ${consumption_sum}= Evaluate ${consumption_sum}+${current_consumptions} |
| ${consumption_max}= Set Variable If ${current_consumptions}>${consumption_max} ${current_consumptions} |
| ... ${consumption_max} |
| ${average_value}= Evaluate ${consumption_sum}/${index} |
| ${upper_bound}= Evaluate (${average_value} + (${average_value}*0.12)) |
| ${lower_bound}= Evaluate (${average_value} - (${average_value}*0.12)) |
| ${time}= Get Time |
| ${formatedIt}= Format String {:>3} ${index} |
| ${formated_mem}= Format String {:>10} ${current_consumptions} |
| ${prestring}= Catenate Memory consumptions of ${container} Leveling ${formatedIt} |
| ${formated_prestring}= Format String {:<54} ${prestring} |
| Run Keyword If ${print2console} Log ${formated_prestring} : ${formated_mem} Bytes at ${time} console=yes |
| Exit For Loop If ${index}>5 and ${current_consumptions}<${upper_bound} and ${current_consumptions}>${lower_bound} |
| Sleep 60s |
| END |
| [return] ${average_value} |
| |
| Get Memory Consumptions |
| [Documentation] Delivers memory consumptions of passed POD |
| [Arguments] ${prometheusaddr} ${prometheusport} ${container} ${namespace} |
| ${mem_consumption}= utility.get_memory_consumptions ${prometheusaddr}:${prometheusport} ${container} ${namespace} |
| Should Be True ${mem_consumption} > 0 |
| [return] ${mem_consumption} |
| |
| Write Memory Consumption File Per Container |
| [Documentation] Writes memory consumptions file of passed POD for later evaluation. |
| [Arguments] ${container} ${mem_consumption} |
| ${output_file}= Catenate SEPARATOR=/ ${OUTPUT DIR} MemoryConsumptions${workflow}${container}.txt |
| Create File ${output_file} |
| FOR ${value} IN @{mem_consumption} |
| ${epoch}= Convert To String ${value[0]} |
| Append To File ${output_file} ${epoch},${value[1]}${\n} |
| END |