| # Copyright 2021 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Negative test states of ONU Go adapter with ATT workflows only (not for DT/TT workflow!) |
| Suite Setup Setup Suite |
| Suite Teardown Teardown Suite |
| Test Setup Setup |
| Test Teardown Teardown |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../libraries/onu_utilities.robot |
| Resource ../../libraries/bbsim.robot |
| Resource ../../variables/variables.robot |
| |
| Library kafka_robot.KafkaClient log_level=DEBUG WITH NAME kafka |
| Library grpc_robot.VolthaTools WITH NAME volthatools |
| |
| *** Variables *** |
| ${NAMESPACE} voltha |
| ${INFRA_NAMESPACE} default |
| ${timeout} 300s |
| ${of_id} 0 |
| ${logical_id} 0 |
| ${has_dataplane} True |
| ${external_libs} True |
| ${teardown_device} True |
| ${scripts} ../../scripts |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| # KV Store Prefix |
| # example: -v kvstoreprefix:voltha/voltha_voltha |
| ${kvstoreprefix} voltha/voltha_voltha |
| # used tech profile, can be passed via the command line too, valid values: default (=1T1GEM), 1T4GEM, 1T8GEM |
| # example: -v techprofile:1T4GEM |
| ${techprofile} default |
| # when voltha is running in k8s port forwarding is needed |
| # example: -v PORT_FORWARDING:False |
| ${PORT_FORWARDING} True |
| # kafka ip e.g. ip of master host where k8s is running |
| # example: -v KAFKA_IP:10.0.2.15 |
| ${KAFKA_IP} 127.0.0.1 |
| # kafka port: port of kafka nodeport |
| # example: -v KAFKA_PORT:30201 |
| ${KAFKA_PORT} 30201 |
| # kafka service port: service port of kafka nodeport |
| # example: -v KAFKA_SVC_PORT:9094 |
| ${KAFKA_SVC_PORT} 9094 |
| # flag debugmode is used, if true timeout calculation various, can be passed via the command line too |
| # example: -v debugmode:True |
| ${debugmode} False |
| # logging flag to enable Collect Logs, can be passed via the command line too |
| # example: -v logging:True |
| ${logging} False |
| # if True execution will be paused before clean up, only use in case of manual testing, do not use in ci pipeline! |
| # example: -v pausebeforecleanup:True |
| ${pausebeforecleanup} False |
| # if True some outputs to console are done during running tests e.g. long duration flow test |
| # example: -v print2console:True |
| ${print2console} False |
| ${data_dir} ../data |
| |
| # flag to choose the subscriber provisioning command type in ONOS |
| # TT often provision a single services for a subscriber (eg: hsia, voip, ...) one after the other. |
| # if set to True, command used is "volt-add-subscriber-unitag" |
| # if set to False, comand used is "volt-add-subscriber-access" |
| ${unitag_sub} False |
| |
| *** Test Cases *** |
| ONU Negative State Test |
| [Documentation] Validates the ONU Go adapter states will never leave starting-openomci |
| ... Due to a 'omci-response-rate' lower than 8 more OMCI messages will be through away by BBSIM than |
| ... repeated by openonu-go-adapter. So ONU will never leave starting-openomci state. |
| ... Timeout has to set at least to 300s (or more) |
| [Tags] NegativeStateTestOnuGo |
| [Setup] Run Keywords Start Logging ONUNegativeStateTest |
| ... AND kafka.Records Clear |
| ... AND Setup |
| # Suite Variable will be overwritten by Teardown of Current State Test All Onus |
| Set Suite Variable ${StateTestAllONUs} True |
| ${seconds}= Convert Time ${timeout} |
| ${seconds}= Convert To String ${seconds} |
| ${seconds}= Get Substring ${seconds} 0 -2 |
| FOR ${I} IN RANGE ${seconds} |
| Sleep 1s |
| Current State Test All Onus starting-openomci timeout=1x |
| Exit For Loop If not ${StateTestAllONUs} |
| END |
| ${list_onu_device_id} Create List |
| Build ONU Device Id List ${list_onu_device_id} |
| Run Keyword If ${print2console} Log Check for device events that indicate a failed OMCI communication. console=yes |
| Wait Until Keyword Succeeds ${timeout} 5s Validate Failed OMCI Communication All ONUs ${list_onu_device_id} |
| [Teardown] Run Keywords Printout ONU Serial Number and Device Id print2console=${print2console} |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging ONUStateTest |
| |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Set up the test suite |
| Start Logging Setup or Teardown Setup-${SUITE NAME} |
| ${LogInfo}= Catenate |
| ... \r\nPassed arguments: |
| ... techprofile:${techprofile}, |
| ... debugmode:${debugmode}, logging:${logging}, pausebeforecleanup:${pausebeforecleanup}, |
| ... print2console:${print2console} |
| Log ${LogInfo} console=yes |
| Common Test Suite Setup |
| ${techprofile}= Set Variable If "${techprofile}"=="1T1GEM" default ${techprofile} |
| Set Suite Variable ${techprofile} |
| Run Keyword If "${techprofile}"=="default" Log To Console \nTechProfile:default (1T1GEM) |
| ... ELSE IF "${techprofile}"=="1T4GEM" Set Tech Profile 1T4GEM ${INFRA_NAMESPACE} |
| ... ELSE IF "${techprofile}"=="1T8GEM" Set Tech Profile 1T8GEM ${INFRA_NAMESPACE} |
| ... ELSE Fail The TechProfile (${techprofile}) is not valid! |
| # delete etcd MIB Template Data |
| Delete MIB Template Data ${INFRA_NAMESPACE} |
| # delete etcd onu data |
| Delete ONU Go Adapter ETCD Data namespace=${INFRA_NAMESPACE} validate=True |
| # set ${kafka} depending on environment in case of port-forward is needed |
| ${rc} ${kafka}= Run Keyword If ${PORT_FORWARDING} Run and Return Rc and Output |
| ... kubectl get svc -n ${INFRA_NAMESPACE} | grep kafka-0-external | awk '{print $1}' |
| Run Keyword If ${PORT_FORWARDING} Should Not Be Empty ${kafka} Service kafka-0-external not found |
| # start port forwarding if needed (when voltha runs in k8s) |
| ${portFwdHandle} = Run Keyword If ${PORT_FORWARDING} Start Process |
| ... kubectl port-forward --address 0.0.0.0 --namespace default svc/${kafka} ${KAFKA_PORT}:${KAFKA_SVC_PORT} & |
| ... shell=true |
| Set Suite Variable ${portFwdHandle} |
| Sleep 5s |
| # open connection to read kafka bus |
| Wait Until Keyword Succeeds 3x 5s |
| ... kafka.Connection Open ${KAFKA_IP} ${KAFKA_PORT} voltha.events timestamp_from=0 |
| Run Keyword If ${logging} Collect Logs |
| Stop Logging Setup or Teardown Setup-${SUITE NAME} |
| |
| Teardown Suite |
| [Documentation] Replaces the Suite Teardown in utils.robot. |
| ... Cleans up and checks all ONU ports disabled in ONOS. |
| ... Furthermore gives the possibility to pause the execution. |
| Start Logging Setup or Teardown Teardown-${SUITE NAME} |
| Run Keyword If ${pausebeforecleanup} Import Library Dialogs |
| Run Keyword If ${pausebeforecleanup} Pause Execution Press OK to continue with clean up! |
| Run Keyword If ${pausebeforecleanup} Log Teardown will be continued... console=yes |
| Run Keyword If ${teardown_device} Delete All Devices and Verify |
| # close connection to kafka |
| kafka.Connection Close |
| # stop port forwarding if started |
| Run Keyword If ${PORT_FORWARDING} Terminate Process ${portFwdHandle} kill=true |
| Wait Until Keyword Succeeds ${timeout} 1s Validate Onu Data In Etcd ${INFRA_NAMESPACE} 0 ${kvstoreprefix} |
| ... without_pm_data=False |
| Wait for Ports in ONOS for all OLTs ${ONOS_SSH_IP} ${ONOS_SSH_PORT} 0 BBSM ${timeout} |
| Run Keyword If ${logging} Collect Logs |
| Stop Logging Setup or Teardown Teardown-${SUITE NAME} |
| Close All ONOS SSH Connections |
| Remove Tech Profile ${INFRA_NAMESPACE} |
| |
| Validate Failed OMCI Communication All ONUs |
| [Documentation] Validates Failed OMCI communication Events per ONU |
| [Arguments] ${list_onu_device_id} |
| ${Kafka_Records}= kafka.Records Get voltha.events |
| ${RecordsLength}= Get Length ${Kafka_Records} |
| FOR ${Index} IN RANGE 0 ${RecordsLength} |
| ${metric}= Set Variable ${Kafka_Records[${Index}]} |
| ${message}= Get From Dictionary ${metric} message |
| ${event}= volthatools.Events Decode Event ${message} return_default=true |
| Continue For Loop If not 'device_event' in ${event} |
| ${event_name}= Get From Dictionary ${event['device_event']} device_event_name |
| Continue For Loop If "${event_name}" != "ONU_OMCI_COMMUNICATION_FAILURE_CONFIG" |
| ${resource_id}= Get From Dictionary ${event['device_event']} resource_id |
| Remove Values From List ${list_onu_device_id} ${resource_id} |
| END |
| Should Be Empty ${list_onu_device_id} Missing MIB Audits for ONUs ${list_onu_device_id}! |