| # Copyright 2017 - present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # FIXME Can we use the same test against BBSim and Hardware? |
| |
| *** Settings *** |
| Documentation Test various end-to-end scenarios |
| Suite Setup Setup Suite |
| Test Setup Setup |
| Test Teardown Teardown |
| Suite Teardown Teardown Suite |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../libraries/DependencyLibrary.py |
| Resource ../../libraries/onos.robot |
| Resource ../../libraries/voltctl.robot |
| Resource ../../libraries/voltha.robot |
| Resource ../../libraries/utils.robot |
| Resource ../../libraries/k8s.robot |
| Resource ../../variables/variables.robot |
| Resource ../../libraries/power_switch.robot |
| |
| *** Variables *** |
| ${POD_NAME} flex-ocp-cord |
| ${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs |
| #${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml |
| ${HELM_CHARTS_DIR} ~/helm-charts |
| ${VOLTHA_POD_NUM} 8 |
| ${NAMESPACE} voltha |
| ${INFRA_NAMESPACE} default |
| ${STACK_NAME} voltha |
| # For below variable value, using deployment name as using grep for |
| # parsing radius pod name, we can also use full radius pod name |
| ${RESTART_POD_NAME} radius |
| ${timeout} 60s |
| ${of_id} 0 |
| ${logical_id} 0 |
| ${has_dataplane} True |
| ${teardown_device} False |
| ${scripts} ../../scripts |
| |
| # Per-test logging on failure is turned off by default; set this variable to enable |
| ${container_log_dir} ${None} |
| |
| # logging flag to enable Collect Logs, can be passed via the command line too |
| # example: -v logging:False |
| ${logging} True |
| |
| # Flag specific to Soak Jobs |
| ${SOAK_TEST} False |
| |
| *** Test Cases *** |
| Verify ONU after Rebooting Physically for DT |
| [Documentation] Test the ONU functionality by physically turning on/off ONU. |
| ... Assuming that all the ONUs are DHCP/pingable (i.e. assuming sanityDt test was executed) |
| ... Test case runs only on the PODs that are configured with PowerSwitch that |
| ... controls the power off/on ONUs/OLT remotely (simulating a physical reboot) |
| [Tags] functionalDt PowerSwitchOnuRebootDt VOL-2819 PowerSwitch |
| [Setup] Start Logging RebootOnu_PowerSwitch_Dt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Delete All Devices and Verify |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging RebootOnu_PowerSwitch_Dt |
| # Add OLT device |
| Setup |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| Power Switch Connection Suite ${web_power_switch.ip} ${web_power_switch.user} ${web_power_switch.password} |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| # Disable Power Switch |
| Disable Switch Outlet ${src['power_switch_port']} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| # Remove Subscriber Access (To replicate DT workflow) |
| Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port} |
| # Allow the remove subscriber command to clean up all the flows, schedulers and queues before deleting the device |
| Sleep 30s |
| # Delete ONU Device (To replicate DT workflow) |
| Delete Device ${onu_device_id} |
| Sleep 5s |
| # Enable Power Switch |
| Enable Switch Outlet ${src['power_switch_port']} |
| # Waiting extra time for the ONU to come up |
| Sleep 60s |
| # Check ONU port is Enabled in ONOS |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| # Verify subscriber access flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onu_port} ${nni_port} ${src['s_tag']} |
| #Run Keyword If ${has_dataplane} Clean Up Linux |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| END |
| # Verify flows for all OLTs |
| Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate All OLT Flows |
| |
| Verify OLT after Rebooting Physically for DT |
| [Documentation] Test the physical reboot of the OLT |
| ... Assuming that all the ONUs are DHCP/pingable (i.e. assuming sanityDt test was executed) |
| ... Test performs a physical reboot, performs "reboot" from the OLT CLI |
| [Tags] functionalDt PhysicalOltRebootDt VOL-2817 |
| [Setup] Start Logging RebootOlt_Physical_Dt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Delete All Devices and Verify |
| ... AND Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging RebootOlt_Physical_Dt |
| # Add OLT device |
| Setup |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| # Reboot the OLT from the OLT CLI |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_user}= Get From Dictionary ${list_olts}[${I}] user |
| ${olt_pass}= Get From Dictionary ${list_olts}[${I}] pass |
| ${olt_ssh_ip}= Get From Dictionary ${list_olts}[${I}] sship |
| ${olt_serial_number}= Get From Dictionary ${list_olts}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| Run Keyword If ${has_dataplane} Login And Run Command On Remote System |
| ... reboot ${olt_ssh_ip} ${olt_user} ${olt_pass} prompt=# |
| END |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| # Wait for the OLT to come back up |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_user}= Get From Dictionary ${list_olts}[${I}] user |
| ${olt_pass}= Get From Dictionary ${list_olts}[${I}] pass |
| ${olt_ssh_ip}= Get From Dictionary ${list_olts}[${I}] sship |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s |
| ... Check Remote System Reachability True ${olt_ssh_ip} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s |
| ... Validate OLT Device ENABLED ACTIVE |
| ... REACHABLE ${olt_serial_number} |
| END |
| # Waiting extra time for the ONUs to come up |
| Sleep 60s |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| |
| Verify restart openonu-adapter container after subscriber provisioning for DT |
| [Documentation] Restart openonu-adapter container after VOLTHA is operational. |
| ... Prerequisite : ONUs are authenticated and pingable. |
| [Tags] Restart-OpenOnu-Dt soak |
| [Setup] Start Logging Restart-OpenOnu-Dt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging Restart-OpenOnu-Dt |
| # Add OLT device |
| Run Keyword If '${SOAK_TEST}'=='False' Setup |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countBeforeRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| ${podName} Set Variable adapter-open-onu |
| Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName} |
| Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE} |
| ... app ${podName} Running |
| # Wait for 1 min after openonu adapter is restarted |
| Sleep 60s |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| Should Be Equal As Strings ${countAfterRestart} ${countBeforeRestart} |
| Log to console Pod ${podName} restarted and sanity checks passed successfully |
| Run Keyword If '${SOAK_TEST}'=='False' Delete All Devices and Verify |
| |
| Verify restart openolt-adapter container after subscriber provisioning for DT |
| [Documentation] Restart openolt-adapter container after VOLTHA is operational. |
| ... Prerequisite : ONUs are authenticated and pingable. |
| [Tags] Restart-OpenOlt-Dt soak |
| [Setup] Start Logging Restart-OpenOlt-Dt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging Restart-OpenOlt-Dt |
| # Add OLT device |
| Run Keyword If '${SOAK_TEST}'=='False' setup |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countBforRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| ${podName} Set Variable ${OLT_ADAPTER_APP_LABEL} |
| Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName} |
| Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE} |
| ... app ${podName} Running |
| # Wait for 1 min after openolt adapter is restarted |
| Sleep 60s |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| Should Be Equal As Strings ${countAfterRestart} ${countBforRestart} |
| Log to console Pod ${podName} restarted and sanity checks passed successfully |
| |
| Verify openolt adapter restart before subscriber provisioning for DT |
| [Documentation] Restart openolt-adapter container before adding the subscriber. |
| [Tags] functionalDt olt-adapter-restart-Dt |
| [Setup] Start Logging OltAdapterRestart-Dt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging OltAdapterRestart-Dt |
| # Add OLT device |
| Clear All Devices Then Create New Device |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Set Global Variable ${of_id} |
| |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| ... ${of_id} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s |
| ... Validate Device ENABLED ACTIVE REACHABLE |
| ... ${onu_device_id} onu=True onu_reason=initial-mib-downloaded by_dev_id=True |
| END |
| # Scale down the open OLT adapter deployment to 0 PODs and once confirmed, scale it back to 1 |
| Scale K8s Deployment by Pod Label ${NAMESPACE} app ${OLT_ADAPTER_APP_LABEL} 0 |
| Wait Until Keyword Succeeds ${timeout} 2s Pods Do Not Exist By Label ${NAMESPACE} app |
| ... ${OLT_ADAPTER_APP_LABEL} |
| # Scale up the open OLT adapter deployment and make sure both it and the ofagent deployment are back |
| Scale K8s Deployment by Pod Label ${NAMESPACE} app ${OLT_ADAPTER_APP_LABEL} 1 |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Check Expected Available Deployment Replicas By Pod Label ${NAMESPACE} app ${OLT_ADAPTER_APP_LABEL} 1 |
| |
| # Ensure the device is available in ONOS, this represents system connectivity being restored |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| ... ${olt_serial_number} |
| Wait Until Keyword Succeeds ${timeout} 2s Device Is Available In ONOS |
| ... http://karaf:karaf@${ONOS_REST_IP}:${ONOS_REST_PORT} ${of_id} |
| END |
| |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| ... ${of_id} |
| # Add subscriber access and verify that DHCP completes to ensure system is still functioning properly |
| Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify subscriber access flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onu_port} ${nni_port} ${src['s_tag']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| END |
| |
| Verify restart ofagent container after subscriber is provisioned for DT |
| [Documentation] Restart ofagent container after VOLTHA is operational. |
| ... Prerequisite : ONUs are authenticated and pingable. |
| [Tags] functionalDt ofagentRestart-Dt soak |
| [Setup] Start Logging ofagentRestart-Dt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging ofagentRestart-Dt |
| ... AND Scale K8s Deployment ${NAMESPACE} ${STACK_NAME}-voltha-ofagent 1 |
| # set timeout value |
| ${waitforRestart} Set Variable 120s |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countBforRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| ${podName} Set Variable ofagent |
| Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName} |
| Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE} |
| ... app ${podName} Running |
| Wait Until Keyword Succeeds ${timeout} 3s Pods Are Ready By Label ${NAMESPACE} app ${podName} |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| Should Be Equal As Strings ${countAfterRestart} ${countBforRestart} |
| # Scale Down the Of-Agent Deployment |
| Scale K8s Deployment ${NAMESPACE} ${STACK_NAME}-voltha-ofagent 0 |
| Sleep 30s |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| # Check ONU port is Disabled in ONOS |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify UNI Port Is Disabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| # Verify subscriber access flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onu_port} ${nni_port} ${src['s_tag']} |
| # Verify Ping |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Check Ping True |
| ... ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} ${src['ip']} |
| ... ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| # Scale Up the Of-Agent Deployment |
| Scale K8s Deployment ${NAMESPACE} ${STACK_NAME}-voltha-ofagent 1 |
| Wait Until Keyword Succeeds ${waitforRestart} 2s Validate Pod Status ofagent ${NAMESPACE} |
| ... Running |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| Log to console Pod ${podName} restarted and sanity checks passed successfully |
| |
| Sanity E2E Test for OLT/ONU on POD With Core Fail and Restart for DT |
| [Documentation] Deploys an device instance and waits for it to authenticate. After |
| ... authentication is successful the rw-core deployment is scaled to 0 instances to |
| ... simulate a POD crash. The test then scales the rw-core back to a single instance |
| ... and configures ONOS for access. The test succeeds if the device is able to |
| ... complete the DHCP sequence. |
| [Tags] functionalDt rwcore-restart-Dt |
| [Setup] Run Keywords Start Logging RwCoreFailAndRestart-Dt |
| ... AND Clear All Devices Then Create New Device |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging RwCoreFailAndRestart-Dt |
| #... AND Delete Device and Verify |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| ... ${olt_serial_number} |
| ${nni_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get NNI Port in ONOS ${of_id} |
| # Set Global Variable ${nni_port} |
| END |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| ... ${of_id} |
| # Bring up the device and verify it authenticates |
| Wait Until Keyword Succeeds 360s 5s Validate Device ENABLED ACTIVE REACHABLE |
| ... ${onu_device_id} onu=True onu_reason=initial-mib-downloaded by_dev_id=True |
| END |
| |
| # Scale down the rw-core deployment to 0 PODs and once confirmed, scale it back to 1 |
| Scale K8s Deployment voltha voltha-voltha-rw-core 0 |
| Wait Until Keyword Succeeds ${timeout} 2s Pod Does Not Exist voltha voltha-voltha-rw-core |
| # Ensure the ofagent POD goes "not-ready" as expected |
| Wait Until keyword Succeeds ${timeout} 2s |
| ... Check Expected Available Deployment Replicas voltha voltha-voltha-ofagent 0 |
| # Scale up the core deployment and make sure both it and the ofagent deployment are back |
| Scale K8s Deployment voltha voltha-voltha-rw-core 1 |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Check Expected Available Deployment Replicas voltha voltha-voltha-rw-core 1 |
| Wait Until Keyword Succeeds ${timeout} 2s |
| ... Check Expected Available Deployment Replicas voltha voltha-voltha-ofagent 1 |
| # For some reason scaling down and up the POD behind a service causes the port forward to stop working, |
| # so restart the port forwarding for the API service |
| Restart VOLTHA Port Forward voltha-api |
| # Ensure that the ofagent pod is up and ready and the device is available in ONOS, this |
| # represents system connectivity being restored |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS |
| ... ${olt_serial_number} |
| Wait Until Keyword Succeeds 120s 2s Device Is Available In ONOS |
| ... http://karaf:karaf@${ONOS_REST_IP}:${ONOS_REST_PORT} ${of_id} |
| END |
| |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| ... ${of_id} |
| # Add subscriber access and verify that DHCP completes to ensure system is still functioning properly |
| Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify subscriber access flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onu_port} ${nni_port} ${src['s_tag']} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| END |
| |
| Verify OLT Soft Reboot for DT |
| [Documentation] Test soft reboot of the OLT using voltctl command |
| [Tags] VOL-2818 OLTSoftRebootDt functionalDt |
| [Setup] Start Logging OLTSoftRebootDt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging OLTSoftRebootDt |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s |
| ... Validate OLT Device ENABLED ACTIVE |
| ... REACHABLE ${olt_serial_number} |
| # Reboot the OLT using "voltctl device reboot" command |
| Reboot Device ${olt_device_id} |
| # Wait for the OLT to actually go down |
| Wait Until Keyword Succeeds 360s 5s Validate OLT Device ENABLED UNKNOWN UNREACHABLE |
| ... ${olt_serial_number} |
| END |
| #Verify that ping fails |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| # Check OLT states |
| FOR ${I} IN RANGE 0 ${olt_count} |
| ${olt_serial_number}= Get From Dictionary ${list_olts}[${I}] sn |
| ${olt_ssh_ip}= Get From Dictionary ${list_olts}[${I}] sship |
| ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number} |
| # Wait for the OLT to come back up |
| Run Keyword If ${has_dataplane} Wait Until Keyword Succeeds 120s 10s |
| ... Check Remote System Reachability True ${olt_ssh_ip} |
| # Check OLT states |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s |
| ... Validate OLT Device ENABLED ACTIVE |
| ... REACHABLE ${olt_serial_number} |
| END |
| # Waiting extra time for the ONUs to come up |
| Sleep 60s |
| #Check after reboot that ONUs are active, DHCP/pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| |
| Verify ONU Soft Reboot for DT |
| [Documentation] Test soft reboot of the ONU using voltctl command |
| [Tags] VOL-2820 ONUSoftRebootDt notready |
| [Setup] Start Logging ONUSoftRebootDt |
| #... AND Setup |
| [Teardown] Run Keywords Collect Logs |
| ... AND Stop Logging ONUSoftRebootDt |
| #... AND Delete Device and Verify |
| #Reboot the ONU and verify that ping fails |
| FOR ${I} IN RANGE 0 ${num_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2s |
| ... Get ONU Port in ONOS ${src['onu']} ${of_id} |
| Reboot Device ${onu_device_id} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| Verify ping is succesful except for given device ${num_onus} ${onu_device_id} |
| # Remove Subscriber Access (To replicate DT workflow) |
| Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port} |
| # Delete ONU Device (To replicate DT workflow) |
| Delete Device ${onu_device_id} |
| Sleep 40s |
| # Check ONU port is Enabled in ONOS |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 120s 2s |
| ... Verify UNI Port Is Enabled ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 2 |
| ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify ONU state in voltha |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s Validate Device |
| ... ENABLED ACTIVE REACHABLE |
| ... ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| # Verify subscriber access flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onu_port} ${nni_port} ${src['s_tag']} |
| #Run Keyword If ${has_dataplane} Clean Up Linux |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure Validate DHCP and Ping True |
| ... True ${src['dp_iface_name']} ${src['s_tag']} ${src['c_tag']} ${dst['dp_iface_ip_qinq']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| ... ${dst['dp_iface_name']} ${dst['ip']} ${dst['user']} ${dst['pass']} ${dst['container_type']} |
| ... ${dst['container_name']} |
| END |
| # Verify ONOS Flows |
| # Number of Access Flows on ONOS equals 4 * the Number of Active ONUs (2 for each downstream and upstream) |
| ${onos_flows_count}= Evaluate 4 * ${num_onus} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added Count DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} |
| ... ${of_id} ${onos_flows_count} |
| # Verify VOLTHA Flows |
| # Number of per OLT Flows equals Twice the Number of Active ONUs (each for downstream and upstream) + 1 for LLDP |
| ${olt_flows}= Evaluate 2 * ${num_onus} + 1 |
| # Number of per ONU Flows equals 2 (one each for downstream and upstream) |
| ${onu_flows}= Set Variable 2 |
| Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows ${olt_flows} |
| ${List_ONU_Serial} Create List |
| Set Suite Variable ${List_ONU_Serial} |
| Build ONU SN List ${List_ONU_Serial} |
| Log ${List_ONU_Serial} |
| Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONU Flows |
| ... ${List_ONU_Serial} ${onu_flows} |
| |
| Verify restart openonu-adapter container for DT |
| [Documentation] Restart openonu-adapter container after VOLTHA is operational. |
| ... Run the ping continuously in background during container restart, |
| ... and verify that there should be no affect on the dataplane. |
| ... Also, verify that the voltha control plane functionality is not affected. |
| [Tags] functionalDt RestartOpenOnuPingDt |
| [Setup] Start Logging RestartOpenOnuPingDt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging RestartOpenOnuPingDt |
| Clear All Devices Then Create New Device |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${ping_output_file}= Set Variable /tmp/${src['onu']}_ping |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Run Ping In Background ${ping_output_file} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countBeforeRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| ${podName} Set Variable adapter-open-onu |
| Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName} |
| Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE} |
| ... app ${podName} Running |
| # Wait for 1 min after openonu adapter is restarted |
| Sleep 60s |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| Should Be Equal As Strings ${countAfterRestart} ${countBeforeRestart} |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Stop Ping Running In Background ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} |
| END |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${ping_output_file}= Set Variable /tmp/${src['onu']}_ping |
| ${ping_output}= Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Retrieve Remote File Contents ${ping_output_file} ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} |
| Check Ping Result True ${ping_output} |
| END |
| # Verify Control Plane Functionality by Deleting and Re-adding the Subscriber |
| Verify Control Plane After Pod Restart DT |
| |
| Verify restart openolt-adapter container for DT |
| [Documentation] Restart openolt-adapter container after VOLTHA is operational. |
| ... Run the ping continuously in background during container restart, |
| ... and verify that there should be no affect on the dataplane. |
| ... Also, verify that the voltha control plane functionality is not affected. |
| [Tags] functionalDt RestartOpenOltPingDt |
| [Setup] Start Logging RestartOpenOltPingDt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging RestartOpenOltPingDt |
| Clear All Devices Then Create New Device |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${ping_output_file}= Set Variable /tmp/${src['onu']}_ping |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Run Ping In Background ${ping_output_file} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countBeforeRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| ${podName} Set Variable ${OLT_ADAPTER_APP_LABEL} |
| Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName} |
| Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE} |
| ... app ${podName} Running |
| # Wait for 1 min after openolt adapter is restarted |
| Sleep 60s |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| Should Be Equal As Strings ${countAfterRestart} ${countBeforeRestart} |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Stop Ping Running In Background ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} |
| END |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${ping_output_file}= Set Variable /tmp/${src['onu']}_ping |
| ${ping_output}= Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Retrieve Remote File Contents ${ping_output_file} ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} |
| Check Ping Result True ${ping_output} |
| END |
| # Verify Control Plane Functionality by Deleting and Re-adding the Subscriber |
| Verify Control Plane After Pod Restart DT |
| |
| Verify restart rw-core container for DT |
| [Documentation] Restart rw-core container after VOLTHA is operational. |
| ... Run the ping continuously in background during container restart, |
| ... and verify that there should be no affect on the dataplane. |
| ... Also, verify that the voltha control plane functionality is not affected. |
| [Tags] functionalDt RestartRwCorePingDt |
| [Setup] Start Logging RestartRwCorePingDt |
| [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs |
| ... AND Stop Logging RestartRwCorePingDt |
| Clear All Devices Then Create New Device |
| # Performing Sanity Test to make sure subscribers are all DHCP and pingable |
| Run Keyword If ${has_dataplane} Clean Up Linux |
| Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test DT |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${ping_output_file}= Set Variable /tmp/${src['onu']}_ping |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Run Ping In Background ${ping_output_file} ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countBeforeRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| ${podName} Set Variable rw-core |
| Wait Until Keyword Succeeds ${timeout} 15s Delete K8s Pods By Label ${NAMESPACE} app ${podName} |
| Wait Until Keyword Succeeds ${timeout} 2s Validate Pods Status By Label ${NAMESPACE} |
| ... app ${podName} Running |
| # Wait for 1 min after rw-core is restarted |
| Sleep 60s |
| # For some reason scaling down and up the POD behind a service causes the port forward to stop working, |
| # so restart the port forwarding for the API service |
| Restart VOLTHA Port Forward voltha-api |
| ${podStatusOutput}= Run kubectl get pods -n ${NAMESPACE} |
| Log ${podStatusOutput} |
| ${countAfterRestart}= Run kubectl get pods -n ${NAMESPACE} | grep Running | wc -l |
| Should Be Equal As Strings ${countAfterRestart} ${countBeforeRestart} |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Stop Ping Running In Background ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} |
| END |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${ping_output_file}= Set Variable /tmp/${src['onu']}_ping |
| ${ping_output}= Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Retrieve Remote File Contents ${ping_output_file} ${src['ip']} ${src['user']} ${src['pass']} |
| ... ${src['container_type']} ${src['container_name']} |
| Check Ping Result True ${ping_output} |
| END |
| # Verify Control Plane Functionality by Deleting and Re-adding the Subscriber |
| Verify Control Plane After Pod Restart DT |
| |
| *** Keywords *** |
| Setup Suite |
| [Documentation] Set up the test suite |
| Common Test Suite Setup |
| #power_switch.robot needs it to support different vendor's power switch |
| ${switch_type}= Get Variable Value ${web_power_switch.type} |
| Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type} |
| # Run Pre-test Setup for Soak Job |
| # Note: As soak requirement, it expects that the devices under test are already created and enabled |
| Run Keyword If '${SOAK_TEST}'=='True' Setup Soak |
| |
| |
| Clear All Devices Then Create New Device |
| [Documentation] Remove any devices from VOLTHA and ONOS |
| # Remove all devices from voltha and nos |
| Delete All Devices and Verify |
| # Execute normal test Setup Keyword |
| Setup |
| |
| Verify Control Plane After Pod Restart DT |
| [Documentation] Verifies the control plane functionality after the voltha pod restart |
| ... by deleting and re-adding the subscriber |
| FOR ${I} IN RANGE 0 ${num_all_onus} |
| ${src}= Set Variable ${hosts.src[${I}]} |
| ${dst}= Set Variable ${hosts.dst[${I}]} |
| ${of_id}= Get ofID From OLT List ${src['olt']} |
| ${onu_device_id}= Get Device ID From SN ${src['onu']} |
| ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} |
| ... ${of_id} |
| # Remove Subscriber Access |
| Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-remove-subscriber-access ${of_id} ${onu_port} |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| # Disable and Re-Enable the ONU (To replicate DT current workflow) |
| # TODO: Delete and Auto-Discovery Add of ONU (not yet supported) |
| Disable Device ${onu_device_id} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Validate Device DISABLED UNKNOWN |
| ... REACHABLE ${src['onu']} |
| Enable Device ${onu_device_id} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s |
| ... Validate Device ENABLED ACTIVE |
| ... REACHABLE ${src['onu']} |
| # Add Subscriber Access |
| Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} |
| ... ${ONOS_SSH_PORT} volt-add-subscriber-access ${of_id} ${onu_port} |
| # Verify subscriber access flows are added for the ONU port |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s |
| ... Verify Subscriber Access Flows Added For ONU DT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} |
| ... ${onu_port} ${nni_port} ${src['s_tag']} |
| Run Keyword And Continue On Failure Wait Until Keyword Succeeds 360s 5s |
| ... Validate Device ENABLED ACTIVE |
| ... REACHABLE ${src['onu']} onu=True onu_reason=omci-flows-pushed |
| Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure |
| ... Wait Until Keyword Succeeds 60s 2s |
| ... Check Ping True ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']} |
| ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']} |
| END |