blob: a2b7d8f64aa1a168b35446cdccfb81ec517ba7a8 [file] [log] [blame]
# Copyright 2017-present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# voltctl common functions
*** Settings ***
Documentation Library for various utilities
Library SSHLibrary
Library String
Library DateTime
Library Process
Library Collections
Library RequestsLibrary
Library OperatingSystem
Resource ./utils.robot
Resource ./flows.robot
*** Keywords ***
Test Empty Device List
[Documentation] Verify that there are no devices in the system
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
Should Be Equal As Integers ${length} 0
Create Device
[Arguments] ${ip} ${port} ${type}=openolt
[Documentation] Creates a device in VOLTHA
#create/preprovision device
${rc} ${device_id}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device create -t ${type} -H ${ip}:${port}
Log ${device_id}
Should Be Equal As Integers ${rc} 0
[Return] ${device_id}
Enable Device
[Arguments] ${device_id}
[Documentation] Enables a device in VOLTHA
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device enable ${device_id}
Should Be Equal As Integers ${rc} 0
Disable Device
[Arguments] ${device_id}
[Documentation] Disables a device in VOLTHA
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device disable ${device_id}
Should Be Equal As Integers ${rc} 0
Delete Device
[Arguments] ${device_id}
[Documentation] Deletes a device in VOLTHA
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device delete ${device_id}
Should Be Equal As Integers ${rc} 0
Reboot Device
[Arguments] ${device_id}
[Documentation] Reboot the OLT using voltctl command
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device reboot ${device_id}
Should Be Equal As Integers ${rc} 0
Disable Devices In Voltha
[Documentation] Disables all the known devices in voltha
[Arguments] ${filter}
${arg}= Set Variable ${EMPTY}
${arg}= Run Keyword If len('${filter}'.strip()) != 0 Set Variable --filter ${filter}
${rc} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m 8MB ${arg} --orderby Root -q | xargs echo -n
Should Be Equal As Integers ${rc} 0
${rc} ${output}= Run Keyword If len('${devices}') != 0 Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device disable ${devices}
Run Keyword If len('${devices}') != 0 Should Be Equal As Integers ${rc} 0
Test Devices Disabled In Voltha
[Documentation] Tests to verify that all devices in VOLTHA are disabled
[Arguments] ${filter}
${rc} ${count}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m 8MB --filter '${filter},AdminState!=DISABLED' -q | wc -l
Should Be Equal As Integers ${rc} 0
Should Be Equal As Integers ${count} 0
Delete Devices In Voltha
[Documentation] Disables all the known devices in voltha
[Arguments] ${filter}
${arg}= Set Variable ${EMPTY}
${arg}= Run Keyword If len('${filter}'.strip()) != 0 Set Variable --filter ${filter}
${rc} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list ${arg} -m 8MB --orderby Root -q | xargs echo -n
Should Be Equal As Integers ${rc} 0
${rc} ${output}= Run Keyword If len('${devices}') != 0 Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device delete ${devices}
Run Keyword If len('${devices}') != 0 Should Be Equal As Integers ${rc} 0
Get Device Flows from Voltha
[Arguments] ${device_id}
[Documentation] Gets device flows from VOLTHA
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device flows ${device_id} -m 8MB
Should Be Equal As Integers ${rc} 0
[Return] ${output}
Get Logical Device Output from Voltha
[Arguments] ${device_id}
[Documentation] Gets logicaldevice flows and ports from VOLTHA
${rc1} ${flows}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice flows ${device_id}
${rc2} ${ports}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice port list ${device_id}
Log ${flows}
Log ${ports}
Should Be Equal As Integers ${rc1} 0
Should Be Equal As Integers ${rc2} 0
Get Device Output from Voltha
[Arguments] ${device_id}
[Documentation] Gets device flows and ports from VOLTHA
${rc1} ${flows}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device flows ${device_id} -m 8MB
${rc2} ${ports}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${device_id} -m 8MB
Log ${flows}
Log ${ports}
Should Be Equal As Integers ${rc1} 0
Should Be Equal As Integers ${rc2} 0
Get Device List from Voltha
[Documentation] Gets Device List Output from Voltha
${rc1} ${devices}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -m 8MB
Log ${devices}
Should Be Equal As Integers ${rc1} 0
Get Device List from Voltha by type
[Documentation] Gets Device List Output from Voltha applying filtering by device type
[Arguments] ${type}
${rc1} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list -m 8MB -f Type=${type} -o json
Log ${devices}
Should Be Equal As Integers ${rc1} 0
Return From Keyword ${devices}
Get Logical Device List from Voltha
[Documentation] Gets Logical Device List Output from Voltha (in json format)
${rc1} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice list -m 8MB -o json
Log ${devices}
Should Be Equal As Integers ${rc1} 0
Return From Keyword ${devices}
Validate Device
[Documentation]
... Parses the output of "voltctl device list" and inspects a device ${id}, specified as either
... the serial number or device ID. Arguments are matched for device states of: "admin_state",
... "oper_status", and "connect_status"
[Arguments] ${admin_state} ${oper_status} ${connect_status}
... ${id}=${EMPTY} ${onu_reason}=${EMPTY} ${onu}=False
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -m 8MB -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${jsonCamelCaseFieldnames}= Run Keyword And Return Status
... Dictionary Should Contain Key ${value} adminState
${astate}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} adminState
... ELSE
... Get From Dictionary ${value} adminstate
${opstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} operStatus
... ELSE
... Get From Dictionary ${value} operstatus
${cstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} connectStatus
... ELSE
... Get From Dictionary ${value} connectstatus
${sn}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} serialNumber
... ELSE
... Get From Dictionary ${value} serialnumber
${devId}= Get From Dictionary ${value} id
${mib_state}= Get From Dictionary ${value} reason
${matched}= Set Variable If '${sn}' == '${id}' or '${devId}' == '${id}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No match found for ${id} to validate device
Log ${value}
Should Be Equal '${astate}' '${admin_state}' Device ${sn} admin_state != ${admin_state}
... values=False
Should Be Equal '${opstatus}' '${oper_status}' Device ${sn} oper_status != ${oper_status}
... values=False
Should Be Equal '${cstatus}' '${connect_status}' Device ${sn} conn_status != ${connect_status}
... values=False
Run Keyword If '${onu}' == 'True' Should Contain '${onu_reason}' '${mib_state}'
... Device ${sn} mib_state incorrect (${mib_state}) values=False
Validate OLT Device
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${id}=${EMPTY}
[Documentation] Parses the output of "voltctl device list" and inspects device ${id}, specified
... as either its serial numbner or device ID. Match on OLT Serial number or Device Id and inspect states
Validate Device ${admin_state} ${oper_status} ${connect_status} ${id}
Validate OLT Devices
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${ids}=${EMPTY}
[Documentation] Parses the output of "voltctl device list" and inspects device ${id}, specified
... as either its serial numbner or device ID. Match on OLT Serial number or Device Id and inspect states
FOR ${I} IN RANGE 0 ${olt_count}
${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
Validate Device ${admin_state} ${oper_status} ${connect_status} ${olt_device_id}
END
Validate ONU Devices
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${List_ONU_Serial}
... ${onu_reason}=omci-flows-pushed
[Documentation] Parses the output of "voltctl device list" and inspects device ${List_ONU_Serial}
... Iteratively match on each Serial number contained in ${List_ONU_Serial} and inspect
... states including MIB state
FOR ${serial_number} IN @{List_ONU_Serial}
Validate Device ${admin_state} ${oper_status} ${connect_status} ${serial_number}
... onu_reason=${onu_reason} onu=True
END
Validate Device Port Types
[Documentation]
... Parses the output of voltctl device port list <device_id> and matches the port types listed
[Arguments] ${device_id} ${pon_type} ${ethernet_type} ${all_active}=True
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${device_id} -m 8MB -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${jsonCamelCaseFieldnames}= Run Keyword And Return Status
... Dictionary Should Contain Key ${value} adminState
${astate}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} adminState
... ELSE
... Get From Dictionary ${value} adminstate
${opstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} operStatus
... ELSE
... Get From Dictionary ${value} operstatus
${type}= Get From Dictionary ${value} type
Should Be Equal '${astate}' 'ENABLED' Device ${device_id} port admin_state != ENABLED values=False
Run Keyword If ${all_active} Should Be Equal '${opstatus}' 'ACTIVE'
... Device ${device_id} port oper_status != ACTIVE values=False
Should Be True '${type}' == '${pon_type}' or '${type}' == '${ethernet_type}'
... Device ${device_id} port type is neither ${pon_type} or ${ethernet_type}
END
Validate OLT Port Types
[Documentation] Parses the output of voltctl device port list ${olt_device_id} and matches the port types listed
[Arguments] ${pon_type} ${ethernet_type}
Validate Device Port Types ${olt_device_id} ${pon_type} ${ethernet_type}
Validate ONU Port Types
[Arguments] ${List_ONU_Serial} ${pon_type} ${ethernet_type}
[Documentation] Parses the output of voltctl device port list for each ONU SN listed in ${List_ONU_Serial}
... and matches the port types listed
FOR ${serial_number} IN @{List_ONU_Serial}
${onu_dev_id}= Get Device ID From SN ${serial_number}
# Only first UNI port is ACTIVE; the rest are in DISCOVERED operstatus
Validate Device Port Types ${onu_dev_id} ${pon_type} ${ethernet_type} all_active=False
END
Validate Device Flows
[Arguments] ${device_id} ${flow_count}=${EMPTY}
[Documentation] Parses the output of voltctl device flows <device_id> and expects flow count > 0
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device flows ${device_id} -m 8MB -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
Log 'Number of flows = ' ${length}
Run Keyword If '${flow_count}' == '${EMPTY}' Should Be True ${length} > 0
... Number of flows for ${device_id} was 0
... ELSE Should Be True ${length} == ${flow_count}
... Number of flows for ${device_id} was not ${flow_count}
Validate OLT Flows
[Arguments] ${flow_count}=${EMPTY} ${olt_device_id}=${EMPTY}
[Documentation] Parses the output of voltctl device flows ${olt_device_id}
... and expects flow count == ${flow_count}
Validate Device Flows ${olt_device_id} ${flow_count}
Validate ONU Flows
[Arguments] ${List_ONU_Serial} ${flow_count}=${EMPTY}
[Documentation] Parses the output of voltctl device flows for each ONU SN listed in ${List_ONU_Serial}
... and expects flow count == ${flow_count}
FOR ${serial_number} IN @{List_ONU_Serial}
${onu_dev_id}= Get Device ID From SN ${serial_number}
Validate Device Flows ${onu_dev_id} ${flow_count}
END
Validate ONU Devices With Duration
[Documentation]
... Parses the output of "voltctl device list" and inspects all devices ${List_ONU_Serial},
... Iteratively match on each Serial number contained in ${List_ONU_Serial} and inspect
... states including MIB state.
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${onu_reason}
... ${List_ONU_Serial} ${startTime} ${print2console}=False ${output_file}=${EMPTY}
... ${alternate_reason}=${EMPTY}
${cmd}= Catenate voltctl -c ${VOLTCTL_CONFIG} device list -m 8MB -f Type=brcm_openomci_onu
... --format '{{.SerialNumber}}\t{{.AdminState}}\t{{.OperStatus}}\t{{.ConnectStatus}}\t{{.Reason}}' | grep -v SERIALNUMBER
${rc} ${output}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0
${timeCurrent} = Get Current Date
${timeTotalMs} = Subtract Date From Date ${timeCurrent} ${startTime} result_format=number
@{Results}= Split String ${output} \n
FOR ${Line} IN @{Results}
${matched}= Set Variable False
@{words}= Split String ${Line} \t
${sn}= Set Variable ${words[0]}
${astate}= Set Variable ${words[1]}
${opstatus}= Set Variable ${words[2]}
${cstatus}= Set Variable ${words[3]}
${mib_state}= Set Variable ${words[4]}
${onu_id}= Get Index From List ${List_ONU_Serial} ${sn}
${matched}= Set Variable If -1 != ${onu_id} True False
${matched}= Set Variable If '${astate}' == '${admin_state}' ${matched} False
${matched}= Set Variable If '${opstatus}' == '${oper_status}' ${matched} False
${matched}= Set Variable If '${cstatus}' == '${connect_status}' ${matched} False
${len}= Get Length ${alternate_reason}
${matches}= Run Keyword If ${len} >= 1 Get Match Count ${alternate_reason} ${mib_state}
... ELSE Set Variable 0
${matched}= Set Variable If '${mib_state}' == '${onu_reason}' or ${matches} >= 1
... ${matched} False
Run Keyword If ${matched} and ${print2console} Log
... \r\nONU ${sn} reached the state ${onu_reason} after ${timeTotalMs} sec. console=yes
Run Keyword If ${matched} and ('${output_file}'!='${EMPTY}') Append To File ${output_file}
... \r\nONU ${sn} reached the state ${onu_reason} after ${timeTotalMs} sec.
Run Keyword If ${matched} Remove Values From List ${List_ONU_Serial} ${sn}
END
Should Be Empty ${List_ONU_Serial} List ${List_ONU_Serial} not empty
Validate ONU Devices MIB State With Duration
[Documentation]
... Parses the output of "voltctl device list" and inspects all devices ${List_ONU_Serial},
... Iteratively match on each Serial number contained in ${List_ONU_Serial} and inspect MIB state.
[Arguments] ${onu_reason}
... ${List_ONU_Serial} ${startTime} ${print2console}=False ${output_file}=${EMPTY}
${type} = Set Variable brcm_openomci_onu
${voltctl_commad} = Catenate SEPARATOR=
... voltctl device list -m 8MB -f Type=${type} -f Reason=${onu_reason} --format '{{.SerialNumber}}'
${rc} ${output}= Run and Return Rc and Output ${voltctl_commad}
Should Be Equal As Integers ${rc} 0
${timeCurrent} = Get Current Date
${timeTotalMs} = Subtract Date From Date ${timeCurrent} ${startTime} result_format=number
@{outputdata} = Split String ${output}
${outputlength} = Get Length ${outputdata}
${onulength} = Get Length ${List_ONU_Serial}
${Matches} = Run Keyword If ${outputlength}<=${onulength}
... Compare Lists ${outputdata} ${List_ONU_Serial}
... ELSE Compare Lists ${List_ONU_Serial} ${outputdata}
${length} = Get Length ${Matches}
FOR ${INDEX} IN RANGE 0 ${length}
${sn}= Get From List ${Matches} ${INDEX}
Run Keyword If ${print2console} Log
... \r\nONU ${sn} reached the state ${onu_reason} after ${timeTotalMs} sec. console=yes
Run Keyword If ('${output_file}'!='${EMPTY}') Append To File ${output_file}
... \r\nONU ${sn} reached the state ${onu_reason} after ${timeTotalMs} sec.
Remove Values From List ${List_ONU_Serial} ${sn}
END
Should Be Empty ${List_ONU_Serial} List ${List_ONU_Serial} not empty
Validate ONU Device By Device Id
[Documentation]
... Parses the output of "voltctl device list" filtered by device id and inspects states including reason.
[Arguments] ${admin_state} ${oper_status} ${connect_status} ${onu_reason} ${onu_id}
${cmd} Catenate voltctl -c ${VOLTCTL_CONFIG} device list --filter=Id=${onu_id} -m 8MB -o json
${rc} ${output}= Run and Return Rc and Output ${cmd}
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
${length}= Get Length ${jsondata}
Should Be Equal As Integers ${length} 1 No match found for ${onu_id} to validate device
${value}= Get From List ${jsondata} 0
Log ${value}
${jsonCamelCaseFieldnames}= Run Keyword And Return Status
... Dictionary Should Contain Key ${value} adminState
${astate}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} adminState
... ELSE
... Get From Dictionary ${value} adminstate
${opstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} operStatus
... ELSE
... Get From Dictionary ${value} operstatus
${cstatus}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} connectStatus
... ELSE
... Get From Dictionary ${value} connectstatus
${sn}= Run Keyword If ${jsonCamelCaseFieldNames}
... Get From Dictionary ${value} serialNumber
... ELSE
... Get From Dictionary ${value} serialnumber
${devId}= Get From Dictionary ${value} id
${mib_state}= Get From Dictionary ${value} reason
Should Be Equal '${devId}' '${onu_id}' No match found for ${onu_id} to validate device
... values=False
Should Be Equal '${astate}' '${admin_state}' Device ${sn} admin_state != ${admin_state}
... values=False
Should Be Equal '${opstatus}' '${oper_status}' Device ${sn} oper_status != ${oper_status}
... values=False
Should Be Equal '${cstatus}' '${connect_status}' Device ${sn} conn_status != ${connect_status}
... values=False
Should Be Equal '${mib_state}' '${onu_reason}'
... Device ${sn} mib_state incorrect (${mib_state}) values=False
Compare Lists
[Documentation]
... Compares both lists and put all matches in the returned list
[Arguments] ${ListIterate} ${ListCompare}
@{list} = Create List
${length} = Get Length ${ListIterate}
FOR ${INDEX} IN RANGE 0 ${length}
${sn}= Get From List ${ListIterate} ${INDEX}
${onu_id}= Get Index From List ${ListCompare} ${sn}
Run Keyword If -1 != ${onu_id} Append To List ${list} ${sn}
END
[Return] ${list}
Validate Logical Device
[Documentation] Validate Logical Device is listed
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} logicaldevice list -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${devid}= Get From Dictionary ${value} id
${rootdev}= Get From Dictionary ${value} rootDeviceId
${desc}= Get From Dictionary ${value} desc
${sn}= Get From Dictionary ${desc} serialNum
Exit For Loop
END
Should Be Equal '${rootdev}' '${olt_device_id}' Root Device does not match ${olt_device_id} values=False
Should Be Equal '${sn}' '${BBSIM_OLT_SN}' Logical Device ${sn} does not match ${BBSIM_OLT_SN}
... values=False
[Return] ${devid}
Validate Logical Device Ports
[Arguments] ${logical_device_id}
[Documentation] Validate Logical Device Ports are listed and are > 0
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice port list ${logical_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
Should Be True ${length} > 0 Number of ports for ${logical_device_id} was 0
Validate Logical Device Flows
[Arguments] ${logical_device_id}
[Documentation] Validate Logical Device Flows are listed and are > 0
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice flows ${logical_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
Should Be True ${length} > 0 Number of flows for ${logical_device_id} was 0
Retrieve OLT PON Ports
[Arguments] ${olt_device_id}
[Documentation] Retrieves the list of PON ports from the OLT device
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${olt_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${olt_pon_list}= Create List
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${portno}= Get From Dictionary ${value} portNo
${peers}= Get From Dictionary ${value} peers
${len_peers}= Get Length ${peers}
Run Keyword If '${type}' == 'PON_OLT' and ${len_peers} > 0
... Append To List ${olt_pon_list} ${portno}
END
[Return] ${olt_pon_list}
Retrieve Peer List From OLT PON Port
[Arguments] ${olt_device_id} ${pon_port}
[Documentation] Retrieves the list of peer device ids list from the OLT PON port
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${olt_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${portno}= Get From Dictionary ${value} portNo
${peers}= Get From Dictionary ${value} peers
${matched}= Set Variable If '${type}' == 'PON_OLT' and '${portno}' == '${pon_port}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No PON port found for OLT ${olt_device_id}
${length}= Get Length ${peers}
${olt_peer_list}= Create List
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${peers} ${INDEX}
${peer_id}= Get From Dictionary ${value} deviceId
Append To List ${olt_peer_list} ${peer_id}
END
[Return] ${olt_peer_list}
Validate OLT PON Port Status
[Arguments] ${olt_device_id} ${pon_port} ${admin_state} ${oper_status}
[Documentation] Verifies the state of the PON port of the OLT
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${olt_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${portno}= Get From Dictionary ${value} portNo
${astate}= Get From Dictionary ${value} adminState
${opstatus}= Get From Dictionary ${value} operStatus
${matched}= Set Variable If '${type}' == 'PON_OLT' and '${portno}' == '${pon_port}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No PON port found for OLT ${olt_device_id} ${pon_port}
Log ${value}
Should Be Equal '${astate}' '${admin_state}' OLT PON Port admin_state != ${admin_state}
... values=False
Should Be Equal '${opstatus}' '${oper_status}' OLT PON Port oper_status != ${oper_status}
... values=False
DisableOrEnable OLT PON Port
[Arguments] ${operation} ${olt_device_id} ${portno}
[Documentation] Disables or Enables the PON port of the OLT
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port ${operation} ${olt_device_id} ${portno}
Should Be Equal As Integers ${rc} 0
Retrieve Peer List From OLT
[Arguments] ${olt_peer_list}
[Documentation] Retrieve the list of peer device id list from port list
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${olt_device_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${peers}= Get From Dictionary ${value} peers
${matched}= Set Variable If '${type}' == 'PON_OLT' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No PON port found for OLT ${olt_device_id}
${length}= Get Length ${peers}
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${peers} ${INDEX}
${peer_id}= Get From Dictionary ${value} deviceId
Append To List ${olt_peer_list} ${peer_id}
END
Validate OLT Peer Id List
[Arguments] ${olt_peer_id_list}
[Documentation] Match each entry in the ${olt_peer_id_list} against ONU device ids.
FOR ${peer_id} IN @{olt_peer_id_list}
Match OLT Peer Id ${peer_id}
END
Match OLT Peer Id
[Arguments] ${olt_peer_id}
[Documentation] Lookup the OLT Peer Id in against the list of ONU device Ids
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${devid}= Get From Dictionary ${value} id
${matched}= Set Variable If '${devid}' == '${olt_peer_id}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} Peer id ${olt_peer_id} does not match any ONU device id
Validate ONU Peer Id
[Arguments] ${olt_device_id} ${List_ONU_Serial}
[Documentation] Match each ONU peer to that of the OLT device id
FOR ${onu_serial} IN @{List_ONU_Serial}
${onu_dev_id}= Get Device ID From SN ${onu_serial}
Match ONU Peer Id ${onu_dev_id}
END
Match ONU Peer Id
[Arguments] ${onu_dev_id}
[Documentation] Match an ONU peer to that of the OLT device id
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device port list ${onu_dev_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${type}= Get From Dictionary ${value} type
${peers}= Get From Dictionary ${value} peers
${matched}= Set Variable If '${type}' == 'PON_ONU' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No PON port found for ONU ${onu_dev_id}
${length}= Get Length ${peers}
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${peers} ${INDEX}
${peer_id}= Get From Dictionary ${value} deviceId
END
Should Be Equal '${peer_id}' '${olt_device_id}'
... Mismatch between ONU peer ${peer_id} and OLT device id ${olt_device_id} values=False
Get Device ID From SN
[Arguments] ${serial_number}
[Documentation] Gets the device id by matching for ${serial_number}
${rc} ${id}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list --filter=SerialNumber=${serial_number} --format='{{.Id}}'
Should Be Equal As Integers ${rc} 0
Log ${id}
[Return] ${id}
Get Logical Device ID From SN
[Arguments] ${serial_number}
[Documentation] Gets the device id by matching for ${serial_number}
${rc} ${id}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice list --filter=Desc.SerialNum=${serial_number} --format='{{.Id}}'
Should Be Equal As Integers ${rc} 0
Log ${id}
[Return] ${id}
Build ONU SN List
[Arguments] ${serial_numbers} ${olt_serial_number}=${EMPTY} ${num_onus}=${num_all_onus}
[Documentation] Appends all ONU SNs for the given OLT to the ${serial_numbers} list
FOR ${INDEX} IN RANGE 0 ${num_onus}
Run Keyword IF "${olt_serial_number}"=="${hosts.src[${INDEX}].olt}" or "${olt_serial_number}"=="${EMPTY}"
... Append To List ${serial_numbers} ${hosts.src[${INDEX}].onu}
END
Get SN From Device ID
[Arguments] ${device_id}
[Documentation] Gets the device id by matching for ${device_id}
${rc} ${sn}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list --filter=Id=${device_id} --format='{{.SerialNumber}}'
Should Be Equal As Integers ${rc} 0
Log ${sn}
[Return] ${sn}
Get Parent ID From Device ID
[Arguments] ${device_id}
[Documentation] Gets the device id by matching for ${device_id}
${rc} ${pid}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device list --filter=Id=${device_id} --format='{{.ParentId}}'
Should Be Equal As Integers ${rc} 0
Log ${pid}
[Return] ${pid}
Validate Device Removed
[Arguments] ${id}
[Documentation] Verifys that device, ${serial_number}, has been removed
${rc} ${output}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device list -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
@{ids}= Create List
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${device_id}= Get From Dictionary ${value} id
Append To List ${ids} ${device_id}
END
List Should Not Contain Value ${ids} ${id}
Validate all ONUS for OLT Removed
[Arguments] ${num_all_onus} ${hosts} ${olt_serial_number} ${timeout}
[Documentation] Verifys that all the ONUS for OLT ${serial_number}, has been removed
FOR ${J} IN RANGE 0 ${num_all_onus}
${src}= Set Variable ${hosts.src[${J}]}
Continue For Loop If "${olt_serial_number}"!="${src['olt']}"
Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
... Validate Device Removed ${src['onu']}
END
Reboot ONU
[Arguments] ${onu_id} ${validate_device}=True
[Documentation] Using voltctl command reboot ONU and verify that ONU comes up to running state
${rc} ${devices}= Run and Return Rc and Output voltctl -c ${VOLTCTL_CONFIG} device reboot ${onu_id}
Should Be Equal As Integers ${rc} 0
Run Keyword If ${validate_device} Run Keyword And Continue On Failure Wait Until Keyword Succeeds
... 60s 1s Validate ONU Device By Device Id ENABLED DISCOVERED REACHABLE rebooting ${onu_id}
Assert ONUs in Voltha
[Arguments] ${count}
[Documentation] Check that a certain number of devices reached the ACTIVE/ENABLE state
${rc1} ${devices}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} -m 8M device list | grep -v OLT | grep ACTIVE | wc -l
Should Be Equal As Integers ${rc1} 0
Should Be Equal As Integers ${devices} ${count}
Wait for ONUs in VOLTHA
[Arguments] ${count}
[Documentation] Waits until a certain number of devices reached the ACTIVE/ENABLE state
Wait Until Keyword Succeeds 10m 5s Assert ONUs In Voltha ${count}
Count Logical Devices flows
[Documentation] Count the flows across logical devices in VOLTHA
[Arguments] ${targetFlows}
${output}= Get Logical Device List From Voltha
${logical_devices}= To Json ${output}
${total_flows}= Set Variable 0
FOR ${device} IN @{logical_devices}
${rc} ${flows}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} logicaldevice flows ${device['id']} | grep -v ID | wc -l
Should Be Equal As Integers ${rc} 0
${total_flows}= Evaluate ${total_flows} + ${flows}
END
${msg}= Format String Found {total_flows} flows of {targetFlows} expected
... total_flows=${total_flows} targetFlows=${targetFlows}
Log ${msg}
Should Be Equal As Integers ${targetFlows} ${total_flows}
Wait for Logical Devices flows
[Documentation] Waits until the flows have been provisioned in the logical device
[Arguments] ${workflow} ${uni_count} ${olt_count} ${provisioned}
... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp}
${targetFlows}= Calculate flows by workflow ${workflow} ${uni_count} ${olt_count} ${provisioned}
... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp}
Log ${targetFlows}
# TODO extend Validate Logical Device Flows to check the correct number of flows
Wait Until Keyword Succeeds 10m 5s Count Logical Devices flows ${targetFlows}
Count OpenOLT Device Flows
[Documentation] Count the flows across openolt devices in VOLTHA
[Arguments] ${targetFlows}
${output}= Get Device List from Voltha by type openolt
${devices}= To Json ${output}
${total_flows}= Set Variable 0
FOR ${device} IN @{devices}
${rc} ${flows}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device flows ${device['id']} | grep -v ID | wc -l
Should Be Equal As Integers ${rc} 0
${total_flows}= Evaluate ${total_flows} + ${flows}
END
${msg}= Format String Found {total_flows} flows of {targetFlows} expected
... total_flows=${total_flows} targetFlows=${targetFlows}
Log ${msg}
Should Be Equal As Integers ${targetFlows} ${total_flows}
Wait for OpenOLT Devices flows
[Documentation] Waits until the flows have been provisioned in the openolt devices
[Arguments] ${workflow} ${uni_count} ${olt_count} ${provisioned}
... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp}
${beforeFlows}= Calculate flows by workflow ${workflow} ${uni_count} ${olt_count} ${provisioned}
... ${withEapol} ${withDhcp} ${withIgmp} ${withLldp}
# In the physical device we only have 2 data plane flows (on the PON) instead of 4
${afterFlows}= Evaluate ${beforeFlows} - (${uni_count} * 2)
# In the TT workflow we have multiple service,
# so we need to remove 6 flows per each UNI that are only on the ONU device
${ttFlows}= Evaluate ${beforeFlows} - (${uni_count} * 6)
${afterFlows}= Set Variable If $workflow=='tt' ${ttFlows} ${afterFlows}
${targetFlows}= Set Variable If $provisioned=='true' ${afterFlows} ${beforeFlows}
Log ${targetFlows}
Wait Until Keyword Succeeds 10m 5s Count OpenOLT Device Flows ${targetFlows}
Download ONU Device Image
[Documentation] Downloads the given ONU software image
[Arguments] ${id} ${image} ${url} ${ver} ${crc} ${local_dir}
${rc}= Run and Return Rc
... voltctl -c ${VOLTCTL_CONFIG} device image download ${id} ${image} ${url} ${ver} ${crc} ${local_dir}
Should Be Equal As Integers ${rc} 0
Activate ONU Device Image
[Documentation] Activatess the given ONU software image
[Arguments] ${id} ${image} ${ver} ${crc} ${local_dir}
${rc}= Run and Return Rc
... voltctl -c ${VOLTCTL_CONFIG} device image activate ${id} ${image} ${ver} ${crc} ${local_dir}
Should Be Equal As Integers ${rc} 0
Verify ONU Device Image
[Documentation] Verfies the ONU device image state
[Arguments] ${dev_id} ${download_state} ${image_state} ${expected_reason}
${rc} ${output}= Run and Return Rc and Output
... voltctl -c ${VOLTCTL_CONFIG} device image list ${dev_id} -o json
Should Be Equal As Integers ${rc} 0
${jsondata}= To Json ${output}
Log ${jsondata}
${length}= Get Length ${jsondata}
${matched}= Set Variable False
FOR ${INDEX} IN RANGE 0 ${length}
${value}= Get From List ${jsondata} ${INDEX}
${id}= Get From Dictionary ${value} id
${downloadstate}= Get From Dictionary ${value} downloadState
${imagestate}= Get From Dictionary ${value} imageState
${reason}= Get From Dictionary ${value} reason
${matched}= Set Variable If '${id}' == '${dev_id}' True False
Exit For Loop If ${matched}
END
Should Be True ${matched} No ONU Device Image for Id: ${dev_id}
Should Be Equal '${downloadstate}' '${download_state}' ONU Device ${id} Image downloadState does not match
Should Be Equal '${imagestate}' '${image_state}' ONU Device ${id} Image imageState does not match
Should Be Equal '${reason}' '${expected_reason}' ONU Device ${id} Image reason does not match