blob: 11c597a772ae1f09f0279ccd4de29ecbf557bd41 [file] [log] [blame]
Hardik Windlass2013d0c2021-05-20 13:37:25 +00001# Copyright 2021 - present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
14# FIXME Can we use the same test against BBSim and Hardware?
15
16*** Settings ***
17Documentation Test various functional end-to-end scenarios for TT workflow
18Suite Setup Setup Suite
19Test Setup Setup
20Test Teardown Teardown
21Suite Teardown Teardown Suite
22Library Collections
23Library String
24Library OperatingSystem
25Library XML
26Library RequestsLibrary
27Library ../../libraries/DependencyLibrary.py
28Resource ../../libraries/onos.robot
29Resource ../../libraries/voltctl.robot
30Resource ../../libraries/voltha.robot
31Resource ../../libraries/utils.robot
32Resource ../../libraries/k8s.robot
33Resource ../../variables/variables.robot
34Resource ../../libraries/power_switch.robot
35
36*** Variables ***
37${POD_NAME} flex-ocp-cord
38${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
39${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
40#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
41${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
42${HELM_CHARTS_DIR} ~/helm-charts
43${VOLTHA_POD_NUM} 8
44${NAMESPACE} voltha
Hardik Windlass4288c6a2021-09-28 07:22:06 +000045${INFRA_NAMESPACE} default
Hardik Windlass2013d0c2021-05-20 13:37:25 +000046# For below variable value, using deployment name as using grep for
47# parsing radius pod name, we can also use full radius pod name
48${RESTART_POD_NAME} radius
49${timeout} 60s
50${of_id} 0
51${logical_id} 0
52${has_dataplane} True
53${teardown_device} True
54${scripts} ../../scripts
55
56# Per-test logging on failure is turned off by default; set this variable to enable
57${container_log_dir} ${None}
58
Matteo Scandoloda1c64b2021-07-20 10:14:49 -070059# logging flag to enable Collect Logs, can be passed via the command line too
60# example: -v logging:False
61${logging} True
62
Hardik Windlassb1bda362021-11-24 11:54:36 +000063# flag to choose the subscriber provisioning command type in ONOS
64# TT often provision a single services for a subscriber (eg: hsia, voip, ...) one after the other.
65# if set to True, command used is "volt-add-subscriber-unitag"
66# if set to False, comand used is "volt-add-subscriber-access"
67${unitag_sub} False
68
Hardik Windlass2013d0c2021-05-20 13:37:25 +000069# For dataplane bandwidth testing
70${lower_margin_pct} 90 # Allow 10% under the limit
Emrehan UZUNd6f85892021-07-01 13:54:26 +000071${upper_margin_pct} 120 # Allow 20% under the limit
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +000072${pon_max_bw_capacity_xgs}= 9700000 # Mbps, for xgs-pon OLT, when FEC Disabled
Hardik Windlass2013d0c2021-05-20 13:37:25 +000073
74*** Test Cases ***
Girish Gowdracb8482a2021-05-27 09:06:13 -070075Test that the BW is limited to Limiting Bandwidth
Hardik Windlass2013d0c2021-05-20 13:37:25 +000076 [Documentation] Verify support for Tcont type 1.
Girish Gowdracb8482a2021-05-27 09:06:13 -070077 ... Verify that traffic is limited to Limiting Bandwidth (eir+cir+air) configured for the service/onu.
Hardik Windlass2013d0c2021-05-20 13:37:25 +000078 ... Pump 500Mbps in the upstream from RG and verify that the received traffic is only 200Mbps at the BNG.
79 ... Note: Currently, only Flex Pod supports the deployment configuration required to test this scenario.
80 [Tags] functionalTT VOL-4093
81 [Setup] Run Keywords Start Logging TcontType1Onu1
82 ... AND Setup
Hardik Windlass98802ce2021-11-12 14:09:26 +000083 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
Girish Gowdraf244d5b2021-09-01 17:16:16 -070084 ... AND Stop Logging TcontType1Onu1
Hardik Windlass2013d0c2021-05-20 13:37:25 +000085 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlass5083b3a2021-11-11 12:16:22 +000086 Perform Sanity Tests TT
Hardik Windlass2013d0c2021-05-20 13:37:25 +000087 # Find the ONU as required for this test
88 ${test_onu}= Set Variable ${multi_tcont_tests.tcont1[0]}
89 ${test_onu_sn}= Set Variable ${test_onu['onu']}
90 ${test_service_type}= Set Variable ${test_onu['service_type']}
91 ${test_us_bw_profile}= Set Variable ${test_onu['us_bw_profile']}
92 ${matched} ${src} ${dst}= Get ONU details with Given Sn and Service ${test_onu_sn} ${test_service_type}
93 ... ${test_us_bw_profile}
94 Pass Execution If '${matched}' != 'True'
95 ... Skipping test: No ONU found with sn '${test_onu_sn}', service '${test_service_type}' and us_bw '${test_us_bw_profile}'
96 # Check for iperf3 and jq tools
97 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf3 jq
98 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
99 Pass Execution If ${rc} != 0 Skipping test: iperf3 / jq not found on the RG
Girish Gowdracb8482a2021-05-27 09:06:13 -0700100 ${limiting_bw_value_upstream}= Get Limiting Bandwidth Details ${test_us_bw_profile}
Hardik Windlass2013d0c2021-05-20 13:37:25 +0000101 # Stream UDP packets from RG to server
102 ${updict}= Run Iperf3 Test Client ${src} server=${dst['dp_iface_ip_qinq']}
103 ... args=-u -b 500M -t 30 -p 5201
104 # With UDP test, bits per second is the sending rate. Multiply by the loss rate to get the throughput.
105 ${actual_upstream_bw_used}= Evaluate
106 ... (100 - ${updict['end']['sum']['lost_percent']})*${updict['end']['sum']['bits_per_second']}/100000
Girish Gowdracb8482a2021-05-27 09:06:13 -0700107 ${pct_limit_up}= Evaluate 100*${actual_upstream_bw_used}/${limiting_bw_value_upstream}
Hardik Windlass2013d0c2021-05-20 13:37:25 +0000108 Should Be True ${pct_limit_up} >= ${lower_margin_pct}
109 ... The upstream bandwidth guarantee was not met (${pct_limit_up}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000110 Should Be True ${pct_limit_up} <= ${upper_margin_pct}
111 ... The upstream bandwidth exceeded the limit (${pct_limit_up}% of limit)
Hardik Windlass2013d0c2021-05-20 13:37:25 +0000112
Hardik Windlassd388b462021-05-27 05:40:00 +0000113Test that assured BW is allocated as needed on the PON
114 [Documentation] Verify support for Tcont type 2 and 4.
115 ... Verify that the BW from tcont type 4 is bequeathed to type2 as needed.
116 ... 1) Pump 1Gbps in the upstream from the RG for HSIA service and verify that no more than 1Gbps is received at the BNG.
117 ... 2) Pump 500Mbps from the RG for the VoD service and verify that close to 500Mbps is received at the BNG.
118 ... Also, verify that the HSI rate is now truncated to 500Mbps at BNG.
119 ... Note: Currently, only Flex Pod supports the deployment configuration required to test this scenario.
120 [Tags] functionalTT VOL-4095
Hardik Windlass98802ce2021-11-12 14:09:26 +0000121 [Setup] Run Keyword Start Logging TcontType2Type4Onu1
122 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
Girish Gowdraf244d5b2021-09-01 17:16:16 -0700123 ... AND Stop Logging TcontType2Type4Onu1
Hardik Windlass98802ce2021-11-12 14:09:26 +0000124 Clear All Devices Then Create New Device
Hardik Windlassd388b462021-05-27 05:40:00 +0000125 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000126 Perform Sanity Test TT
Hardik Windlassd388b462021-05-27 05:40:00 +0000127
128 # The test expects the first entry in multi_tcont_tests.tcont2tcont4 input will be for service: vod and tcont: 2
129 # The test expects the second entry in multi_tcont_tests.tcont2tcont4 input will be for service: hsia and tcont: 4
130 ${list_onus_ut}= Create List
131 ${num_multi_tcont_input}= Get Length ${multi_tcont_tests.tcont2tcont4}
132 FOR ${I} IN RANGE 0 ${num_multi_tcont_input}
133 ${onu}= Set Variable ${multi_tcont_tests.tcont2tcont4[${I}]}
134 ${onu_sn}= Set Variable ${onu['onu']}
135 ${service}= Set Variable ${onu['service_type']}
136 ${us_bw}= Set Variable ${onu['us_bw_profile']}
137 ${matched} ${src} ${dst}= Get ONU details with Given Sn and Service ${onu_sn}
138 ... ${service} ${us_bw}
139 Pass Execution If '${matched}' != 'True'
140 ... Skipping test: No ONU found with sn '${onu_sn}', service '${service}' and us_bw '${us_bw}'
141 # Check for iperf3 and jq tools
142 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf3 jq
143 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
144 Pass Execution If ${rc} != 0 Skipping test: iperf3 / jq not found on the RG
145 # Get Upstream BW Profile details
146 ${limiting_bw_us}= Get Limiting Bandwidth Details ${us_bw}
147 ${onu_ut} Create Dictionary src ${src} dst ${dst} limiting_bw_us ${limiting_bw_us}
148 Append To List ${list_onus_ut} ${onu_ut}
149 END
150
151 # Case 1: Verify only for HSIA service
152 ${dst}= Set Variable ${list_onus_ut}[1][dst]
153 ${updict}= Run Iperf3 Test Client ${list_onus_ut}[1][src] server=${dst['dp_iface_ip_qinq']}
154 ... args=-t 30 -p 5202
155 ${actual_upstream_bw_used}= Evaluate ${updict['end']['sum_received']['bits_per_second']}/1000
156 ${pct_limit_up}= Evaluate 100*${actual_upstream_bw_used}/${list_onus_ut}[1][limiting_bw_us]
157 Should Be True ${pct_limit_up} >= ${lower_margin_pct}
158 ... The upstream bandwidth guarantee was not met (${pct_limit_up}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000159 Should Be True ${pct_limit_up} <= ${upper_margin_pct}
160 ... The upstream bandwidth exceeded the limit (${pct_limit_up}% of limit)
Hardik Windlassd388b462021-05-27 05:40:00 +0000161
162 # Case 2: Verify for VOD (with index [0]) and HSIA (with index [1]) service combined
163 ${out_file_0}= Set Variable ${CURDIR}/../../tests/data/out_tcont2
164 ${dst_0}= Set Variable ${list_onus_ut}[0][dst]
165 Run Iperf3 Test Client in Background ${list_onus_ut}[0][src] server=${dst_0['dp_iface_ip_qinq']}
166 ... args=-t 30 -p 5201 out_file=${out_file_0}
167 ${out_file_1}= Set Variable ${CURDIR}/../../tests/data/out_tcont4
168 ${dst_1}= Set Variable ${list_onus_ut}[1][dst]
169 Run Iperf3 Test Client in Background ${list_onus_ut}[1][src] server=${dst_1['dp_iface_ip_qinq']}
170 ... args=-t 30 -p 5202 out_file=${out_file_1}
171 # Wait for the above iperf commands to finish (sleep time depends on -t arg value passed in iperf command)
172 Sleep 35s
173 ${out_0}= Read Output File on System ${out_file_0}
174 ${out_1}= Read Output File on System ${out_file_1}
175 ${actual_upstream_bw_used_0}= Evaluate ${out_0['end']['sum_received']['bits_per_second']}/1000
176 ${pct_limit_up_0}= Evaluate 100*${actual_upstream_bw_used_0}/${list_onus_ut}[0][limiting_bw_us]
177 Should Be True ${pct_limit_up_0} >= ${lower_margin_pct}
178 ... The upstream bandwidth guarantee was not met (${pct_limit_up_0}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000179 Should Be True ${pct_limit_up_0} <= ${upper_margin_pct}
180 ... The upstream bandwidth exceeded the limit (${pct_limit_up_0}% of limit)
Hardik Windlassd388b462021-05-27 05:40:00 +0000181 ${actual_upstream_bw_used_1}= Evaluate ${out_1['end']['sum_received']['bits_per_second']}/1000
182 ${pct_limit_up_1}= Evaluate
183 ... 100*${actual_upstream_bw_used_1}/(${list_onus_ut}[1][limiting_bw_us]-${list_onus_ut}[0][limiting_bw_us])
184 Should Be True ${pct_limit_up_1} >= ${lower_margin_pct}
185 ... The upstream bandwidth guarantee was not met (${pct_limit_up_1}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000186 Should Be True ${pct_limit_up_1} <= ${upper_margin_pct}
187 ... The upstream bandwidth exceeded the limit (${pct_limit_up_1}% of limit)
Hardik Windlassd388b462021-05-27 05:40:00 +0000188
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000189Test that the AIR BW is reserved for a ONU
190 [Documentation] Verify support for Tcont type 1 + type 4 at the same time.
191 ... Verify that 8700Mbps is reserved in the upstream as AIR requirement for the VoIP service.
192 ... Pump 1Gbpbs in the upstream from the RG for HSI service, respectively ONU2, ONU3 and verify that up to 1Gbps
193 ... is received at the BNG.
194 ... Then pump ONU2 and ONU3 HSIA combined. ONUs must be share rest of bw in PON Port. (Expect fixed tcont1)
195 ... Note: Currently, only Flex Pod supports the deployment configuration required to test this scenario.
Girish Gowdra8fd96962021-12-14 16:20:04 +0530196 [Tags] functionalTT VOL-4094 non-critical
Hardik Windlass98802ce2021-11-12 14:09:26 +0000197 [Setup] Run Keyword Start Logging TcontType1Type4Onu1Onu2Onu3
198 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
Girish Gowdraf244d5b2021-09-01 17:16:16 -0700199 ... AND Stop Logging TcontType1Type4Onu1Onu2Onu3
Hardik Windlass98802ce2021-11-12 14:09:26 +0000200 Clear All Devices Then Create New Device
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000201 # Push multi-tcont sadis to ONOS
202 Send File To Onos ${CURDIR}/../../tests/data/flex-ocp-cord-sadis-TT-multi-tcont.json
203 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000204 Perform Sanity Test TT
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000205
206 # The test expects the first entry in multi_tcont_tests.tcont1tcont4 input will be for service: voip and tcont: 1
207 # The test expects the second entry in multi_tcont_tests.tcont1tcont4 input will be for service: hsia and tcont: 4
208 ${list_onus_ut}= Create List
209 ${num_multi_tcont_input}= Get Length ${multi_tcont_tests.tcont1tcont4}
210 FOR ${I} IN RANGE 0 ${num_multi_tcont_input}
211 ${onu}= Set Variable ${multi_tcont_tests.tcont1tcont4[${I}]}
212 ${onu_sn}= Set Variable ${onu['onu']}
213 ${service}= Set Variable ${onu['service_type']}
214 ${us_bw}= Set Variable ${onu['us_bw_profile']}
215 ${matched} ${src} ${dst}= Get ONU details with Given Sn and Service ${onu_sn}
216 ... ${service} ${us_bw}
217 Pass Execution If '${matched}' != 'True'
218 ... Skipping test: No ONU found with sn '${onu_sn}', service '${service}' and us_bw '${us_bw}'
219 # Check for iperf3 and jq tools
220 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf3 jq
221 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
222 Pass Execution If ${rc} != 0 Skipping test: iperf3 / jq not found on the RG
223 # Get Upstream BW Profile details
224 ${limiting_bw_us}= Get Limiting Bandwidth Details ${us_bw}
225 ${onu_ut} Create Dictionary src ${src} dst ${dst} limiting_bw_us ${limiting_bw_us}
226 Append To List ${list_onus_ut} ${onu_ut}
227 END
228
229 # Fill the OLT PON Bandwidth with Fixed Bandwidth Profile ONU
230 ${onu_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("serial")
231 ${olt_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("olt")
232 ${us_bw_profile_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("us_bw_profile")
233 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_fill_pon_bw}
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000234 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000235 ... Get ONU Port in ONOS ${onu_fill_pon_bw} ${of_id}
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000236 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass9e3db232021-10-14 07:10:47 +0000237 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000238 ... volt-add-subscriber-access ${of_id} ${onu_port}
239 Sleep 10s
240 ${limiting_bw_us_fill_pon_bw}= Get Limiting Bandwidth Details ${us_bw_profile_fill_pon_bw}
241
242 # Case 1: Verify both ONUs should be able to get 1Gbps separately when only HSIA service is available
243 ${dst}= Set Variable ${list_onus_ut}[0][dst]
244 ${updict}= Run Iperf3 Test Client ${list_onus_ut}[0][src] server=${dst['dp_iface_ip_qinq']}
245 ... args=-t 30 -p 5202
246 ${actual_upstream_bw_used}= Evaluate ${updict['end']['sum_received']['bits_per_second']}/1000
247 ${pct_limit_up}= Evaluate
248 ... 100*${actual_upstream_bw_used}/${list_onus_ut}[0][limiting_bw_us]
249 Should Be True ${pct_limit_up} >= ${lower_margin_pct}
250 ... The upstream bandwidth guarantee was not met (${pct_limit_up}% of resv)
251
252 ${dst}= Set Variable ${list_onus_ut}[1][dst]
253 ${updict}= Run Iperf3 Test Client ${list_onus_ut}[1][src] server=${dst['dp_iface_ip_qinq']}
254 ... args=-t 30 -p 5202
255 ${actual_upstream_bw_used}= Evaluate ${updict['end']['sum_received']['bits_per_second']}/1000
256 ${pct_limit_up}= Evaluate
257 ... 100*${actual_upstream_bw_used}/${list_onus_ut}[1][limiting_bw_us]
258 Should Be True ${pct_limit_up} >= ${lower_margin_pct}
259 ... The upstream bandwidth guarantee was not met (${pct_limit_up}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000260 Should Be True ${pct_limit_up} <= ${upper_margin_pct}
261 ... The upstream bandwidth exceeded the limit (${pct_limit_up}% of limit)
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000262
263 # Case 2: Verify ONU1 and ONU2 will share rest of bw in PON Port. (Expect provisioned fixed bw)
264 ${out_file_0}= Set Variable /tmp/out1_tcont4
265 ${dst_0}= Set Variable ${list_onus_ut}[0][dst]
266 Run Iperf3 Test Client in Background ${list_onus_ut}[0][src] server=${dst_0['dp_iface_ip_qinq']}
267 ... args=-t 30 -p 5201 out_file=${out_file_0}
268 ${out_file_1}= Set Variable /tmp/out2_tcont4
269 ${dst_0}= Set Variable ${list_onus_ut}[0][dst]
270 ${dst_1}= Set Variable ${list_onus_ut}[1][dst]
271 Run Iperf3 Test Client in Background ${list_onus_ut}[1][src] server=${dst_1['dp_iface_ip_qinq']}
272 ... args=-t 30 -p 5202 out_file=${out_file_1}
273 # Wait for the above iperf commands to finish (sleep time depends on -t arg value passed in iperf command)
274 Sleep 35s
275 ${out_0}= Read Output File on System ${out_file_0}
276 ${out_1}= Read Output File on Remote System ${list_onus_ut}[1][src] ${out_file_1}
277 # Verify ONU1 and ONU2 tcont4 is share rest of bw.
278 ${actual_upstream_bw_used_0}= Evaluate ${out_0['end']['sum_received']['bits_per_second']}/1000
279 ${pct_limit_up_0}= Evaluate
280 ... 100*${actual_upstream_bw_used_0}/((${pon_max_bw_capacity_xgs}-${limiting_bw_us_fill_pon_bw})/2)
281 Should Be True ${pct_limit_up_0} >= ${lower_margin_pct}
282 ... The upstream bandwidth guarantee was not met (${pct_limit_up_0}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000283 Should Be True ${pct_limit_up_0} <= ${upper_margin_pct}
284 ... The upstream bandwidth exceeded the limit (${pct_limit_up_0}% of limit)
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000285 ${actual_upstream_bw_used_1}= Evaluate ${out_1['end']['sum_received']['bits_per_second']}/1000
286 ${pct_limit_up_1}= Evaluate
287 ... 100*${actual_upstream_bw_used_1}/((${pon_max_bw_capacity_xgs}-${limiting_bw_us_fill_pon_bw})/2)
288 Should Be True ${pct_limit_up_1} >= ${lower_margin_pct}
289 ... The upstream bandwidth guarantee was not met (${pct_limit_up_1}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000290 Should Be True ${pct_limit_up_1} <= ${upper_margin_pct}
291 ... The upstream bandwidth exceeded the limit (${pct_limit_up_1}% of limit)
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000292 # Verify ONU3 (fixed bw) tcont1 air bw is reservered.
293 ${actual_reserved_upstream_bw_for_tcont1}= Evaluate
294 ... ${pon_max_bw_capacity_xgs}-(${actual_upstream_bw_used_0}+${actual_upstream_bw_used_1})
295 ${pct_limit_up_tcont1}= Evaluate 100*${actual_reserved_upstream_bw_for_tcont1}/${limiting_bw_us_fill_pon_bw}
296 Should Be True ${pct_limit_up_tcont1} >= ${lower_margin_pct}
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000297 ... The upstream bandwidth guarantee was not met (${pct_limit_up_tcont1}% of resv)
298 Should Be True ${pct_limit_up_tcont1} <= ${upper_margin_pct}
299 ... The upstream bandwidth exceeded the limit (${pct_limit_up_tcont1}% of limit)
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000300
301 # Sent original sadis file to onos
302 Send File To Onos ${CURDIR}/../../tests/data/flex-ocp-cord-sadis-TT.json
303
Emrehan UZUN683bb962021-06-11 11:59:31 +0000304Verify that non-assured BW is released to assured BW allocation as needed for TT
305 [Documentation] Verify support for Tcont type 2 and 3.
306 ... Pump 1Gbps in the upstream from RG of ONU2 for VoD service and
307 ... then verify that no more than 700Mbps is received at the BNG.
308 ... Firstly, pump 500Mbps from the RG of ONU1 for the VoD service and
309 ... then verify that close to 500Mbps is received at the BNG.
310 ... Also verify that the VoD rate is now truncated to 500Mbps at BNG for ONU2.
Girish Gowdra8fd96962021-12-14 16:20:04 +0530311 [Tags] functionalTT VOL-4096 non-critical
Hardik Windlass98802ce2021-11-12 14:09:26 +0000312 [Setup] Run Keyword Start Logging TcontType2Onu1Type3Onu2
313 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
Girish Gowdraf244d5b2021-09-01 17:16:16 -0700314 ... AND Stop Logging TcontType2Onu1Type3Onu2
Hardik Windlass98802ce2021-11-12 14:09:26 +0000315 Clear All Devices Then Create New Device
Emrehan UZUN683bb962021-06-11 11:59:31 +0000316 # Push multi-tcont sadis to ONOS
317 Send File To Onos ${CURDIR}/../../tests/data/flex-ocp-cord-sadis-TT-multi-tcont.json
318 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000319 Perform Sanity Test TT
Emrehan UZUN683bb962021-06-11 11:59:31 +0000320
321 # The test expects the first entry in multi_tcont_tests.tcont2tcont3 input will be for service: vod and tcont: 2
322 # The test expects the second entry in multi_tcont_tests.tcont2tcont3 input will be for service: vod and tcont: 3
323 ${list_onus_ut}= Create List
324 ${num_multi_tcont_input}= Get Length ${multi_tcont_tests.tcont2tcont3}
325 ${uni_capacity}= Set Variable 1000000
326 FOR ${I} IN RANGE 0 ${num_multi_tcont_input}
327 ${onu}= Set Variable ${multi_tcont_tests.tcont2tcont3[${I}]}
328 ${onu_sn}= Set Variable ${onu['onu']}
329 ${service}= Set Variable ${onu['service_type']}
330 ${us_bw}= Set Variable ${onu['us_bw_profile']}
331 ${matched} ${src} ${dst}= Get ONU details with Given Sn and Service ${onu_sn}
332 ... ${service} ${us_bw}
333 Pass Execution If '${matched}' != 'True'
334 ... Skipping test: No ONU found with sn '${onu_sn}', service '${service}' and us_bw '${us_bw}'
335 # Check for iperf3 and jq tools
336 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf3 jq
337 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
338 Pass Execution If ${rc} != 0 Skipping test: iperf3 / jq not found on the RG
339 # Get Upstream BW Profile details
340 ${limiting_bw_us}= Get Limiting Bandwidth Details ${us_bw}
341 ${onu_ut} Create Dictionary src ${src} dst ${dst} limiting_bw_us ${limiting_bw_us}
342 Append To List ${list_onus_ut} ${onu_ut}
343 END
344
345 # Fill the OLT PON Bandwidth with Fixed Bandwidth Profile ONU
346 ${onu_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("serial")
347 ${olt_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("olt")
348 ${us_bw_profile_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("us_bw_profile")
349 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_fill_pon_bw}
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000350 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Emrehan UZUN683bb962021-06-11 11:59:31 +0000351 ... Get ONU Port in ONOS ${onu_fill_pon_bw} ${of_id}
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000352 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass9e3db232021-10-14 07:10:47 +0000353 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Emrehan UZUN683bb962021-06-11 11:59:31 +0000354 ... volt-add-subscriber-access ${of_id} ${onu_port}
355 Sleep 10s
356 ${limiting_bw_us_fill_pon_bw}= Get Limiting Bandwidth Details ${us_bw_profile_fill_pon_bw}
357
358 # Case 1: Verify only for VoD service from the RG of ONU2
359 ${dst}= Set Variable ${list_onus_ut}[1][dst]
360 ${updict}= Run Iperf3 Test Client ${list_onus_ut}[1][src] server=${dst['dp_iface_ip_qinq']}
361 ... args=-t 30 -p 5202
362 ${actual_upstream_bw_used}= Evaluate ${updict['end']['sum_received']['bits_per_second']}/1000
363 ${pct_limit_up}= Evaluate 100*${actual_upstream_bw_used}/${list_onus_ut}[1][limiting_bw_us]
364 Should Be True ${pct_limit_up} >= ${lower_margin_pct}
365 ... The upstream bandwidth guarantee was not met (${pct_limit_up}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000366 Should Be True ${pct_limit_up} <= ${upper_margin_pct}
367 ... The upstream bandwidth exceeded the limit (${pct_limit_up}% of limit)
Emrehan UZUN683bb962021-06-11 11:59:31 +0000368
369 # Case 2: Verify for ONU1 (with index [0]) and ONU2 (with index [1]) devices combined
370 ${out_file_0}= Set Variable /tmp/out_tcont2
371 ${dst_0}= Set Variable ${list_onus_ut}[0][dst]
372 Run Iperf3 Test Client in Background ${list_onus_ut}[0][src] server=${dst_0['dp_iface_ip_qinq']}
373 ... args=-t 30 -p 5201 out_file=${out_file_0}
374 ${out_file_1}= Set Variable /tmp/out_tcont3
375 ${dst_1}= Set Variable ${list_onus_ut}[1][dst]
376 Run Iperf3 Test Client in Background ${list_onus_ut}[1][src] server=${dst_1['dp_iface_ip_qinq']}
377 ... args=-t 30 -p 5202 out_file=${out_file_1}
378 # Wait for the above iperf commands to finish (sleep time depends on -t arg value passed in iperf command)
379 Sleep 35s
380 ${out_0}= Read Output File on System ${out_file_0}
381 ${out_1}= Read Output File on Remote System ${list_onus_ut}[1][src] ${out_file_1}
382 ${actual_upstream_bw_used_0}= Evaluate ${out_0['end']['sum_received']['bits_per_second']}/1000
383 ${pct_limit_up_0}= Evaluate 100*${actual_upstream_bw_used_0}/${list_onus_ut}[0][limiting_bw_us]
384 Should Be True ${pct_limit_up_0} >= ${lower_margin_pct}
385 ... The upstream bandwidth guarantee was not met (${pct_limit_up_0}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000386 Should Be True ${pct_limit_up_0} <= ${upper_margin_pct}
387 ... The upstream bandwidth exceeded the limit (${pct_limit_up_0}% of limit)
Emrehan UZUN683bb962021-06-11 11:59:31 +0000388 ${actual_upstream_bw_used_1}= Evaluate ${out_1['end']['sum_received']['bits_per_second']}/1000
389 ${pct_limit_up_1}= Evaluate
390 ... 100*${actual_upstream_bw_used_1}/(${uni_capacity}-${list_onus_ut}[0][limiting_bw_us])
391 Should Be True ${pct_limit_up_1} >= ${lower_margin_pct}
392 ... The upstream bandwidth guarantee was not met (${pct_limit_up_1}% of resv)
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000393 Should Be True ${pct_limit_up_1} <= ${upper_margin_pct}
394 ... The upstream bandwidth exceeded the limit (${pct_limit_up_1}% of limit)
395
396 # Sent original sadis file to onos
397 Send File To Onos ${CURDIR}/../../tests/data/flex-ocp-cord-sadis-TT.json
398
399Verify that best effort BW is released to assured BW requirement as needed and that fixed BW is reserved always on the PON for TT
400 [Documentation] Verify support for Tcont type 4 and 5.
401 ... Pump 1Gbps upstream from the RG for HSI service of ONU2.
402 ... Verify that no more than 1Gbps is received at the BNG.
403 ... Now pump traffic from the RG's for the HSI service both ONU1 and ONU2 at the same time.
404 ... The BNG should receive at least 700Mbps (500 + 200 Mbps) for ONU2.
405 ... The remaining 300Mbps on the PON should be rationed between the two ONUs.
406 ... Now this is largely scheduler implementation dependent, so this is to be observed on the scheduler in the BAL behaves.
407 ... If it equally distributes the remaining BW,
408 ... ONU1 should get 150Mbps and ONU2 in total should get 850Mbps (500+200+150Mbps).
409 [Tags] functionalTT VOL-4097 non-critical
Hardik Windlass98802ce2021-11-12 14:09:26 +0000410 [Setup] Run Keyword Start Logging TcontType4Onu1Type5Onu2
411 [Teardown] Run Keywords Run Keyword If ${logging} Collect Logs
Girish Gowdraf244d5b2021-09-01 17:16:16 -0700412 ... AND Stop Logging TcontType4Onu1Type5Onu2
Hardik Windlass98802ce2021-11-12 14:09:26 +0000413 Clear All Devices Then Create New Device
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000414 Run Keyword If ${has_dataplane} Clean Up Linux
415 Send File To Onos ${CURDIR}/../../tests/data/flex-ocp-cord-sadis-TT-multi-tcont-1.json
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000416 Perform Sanity Test TT
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000417
418 # The test expects the first entry in multi_tcont_tests.tcont4tcont5 input will be for service: hsıa and tcont: 4
419 # The test expects the second entry in multi_tcont_tests.tcont4tcont5 input will be for service: hsıa and tcont: 5
420 ${list_onus_ut}= Create List
421 ${list_onus_ut_air_cir}= Create List
422 ${num_multi_tcont_input}= Get Length ${multi_tcont_tests.tcont4tcont5}
423 FOR ${I} IN RANGE 0 ${num_multi_tcont_input}
424 ${onu}= Set Variable ${multi_tcont_tests.tcont4tcont5[${I}]}
425 ${onu_sn}= Set Variable ${onu['onu']}
426 ${service}= Set Variable ${onu['service_type']}
427 ${us_bw}= Set Variable ${onu['us_bw_profile']}
428 ${matched} ${src} ${dst}= Get ONU details with Given Sn and Service ${onu_sn}
429 ... ${service} ${us_bw}
430 Pass Execution If '${matched}' != 'True'
431 ... Skipping test: No ONU found with sn '${onu_sn}', service '${service}' and us_bw '${us_bw}'
432 # Check for iperf3 and jq tools
433 ${stdout} ${stderr} ${rc}= Execute Remote Command which iperf3 jq
434 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
435 Pass Execution If ${rc} != 0 Skipping test: iperf3 / jq not found on the RG
436 # Get Upstream BW Profile details
437 ${limiting_bw_us}= Get Limiting Bandwidth Details ${us_bw}
438 ${onu_ut} Create Dictionary src ${src} dst ${dst} limiting_bw_us ${limiting_bw_us}
439 Append To List ${list_onus_ut} ${onu_ut}
440 ${limiting_bw_us_air_cir}= Get Limiting Bandwidth Details for Fixed and Committed ${us_bw}
441 ${onu_ut_air_cir} Create Dictionary src ${src} dst ${dst}
442 ... limiting_bw_us_air_cir ${limiting_bw_us_air_cir}
443 Append To List ${list_onus_ut_air_cir} ${onu_ut_air_cir}
444 END
445
446 # Fill the OLT PON Bandwidth with Fixed Bandwidth Profile ONU
447 ${onu_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("serial")
448 ${olt_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("olt")
449 ${us_bw_profile_fill_pon_bw}= Evaluate ${onus_fill_pon_bw}[0].get("us_bw_profile")
450 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_fill_pon_bw}
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000451 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000452 ... Get ONU Port in ONOS ${onu_fill_pon_bw} ${of_id}
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000453 Wait Until Keyword Succeeds ${timeout} 2s
Hardik Windlass9e3db232021-10-14 07:10:47 +0000454 ... Execute ONOS CLI Command use single connection ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
Emrehan UZUNd6f85892021-07-01 13:54:26 +0000455 ... volt-add-subscriber-access ${of_id} ${onu_port}
456 Sleep 10s
457 ${limiting_bw_us_fill_pon_bw}= Get Limiting Bandwidth Details ${us_bw_profile_fill_pon_bw}
458
459 # Case 1: Verify only for HSIA service from the RG of ONU2
460 ${dst}= Set Variable ${list_onus_ut}[1][dst]
461 ${updict}= Run Iperf3 Test Client ${list_onus_ut}[1][src] server=${dst['dp_iface_ip_qinq']}
462 ... args=-t 30 -p 5202
463 ${actual_upstream_bw_used}= Evaluate ${updict['end']['sum_received']['bits_per_second']}/1000
464 ${pct_limit_up}= Evaluate 100*${actual_upstream_bw_used}/${list_onus_ut}[1][limiting_bw_us]
465 Should Be True ${pct_limit_up} >= ${lower_margin_pct}
466 ... The upstream bandwidth guarantee was not met (${pct_limit_up}% of resv)
467 Should Be True ${pct_limit_up} <= ${upper_margin_pct}
468 ... The upstream bandwidth exceeded the limit (${pct_limit_up}% of limit)
469
470 # Case 2: Verify for ONU1 (with index [0]) and ONU2 (with index [1]) devices combined
471 ${out_file_0}= Set Variable /tmp/out_tcont4
472 ${dst_0}= Set Variable ${list_onus_ut}[0][dst]
473 Run Iperf3 Test Client in Background ${list_onus_ut}[0][src] server=${dst_0['dp_iface_ip_qinq']}
474 ... args=-t 30 -p 5201 out_file=${out_file_0}
475 ${out_file_1}= Set Variable /tmp/out_tcont5
476 ${dst_1}= Set Variable ${list_onus_ut}[1][dst]
477 Run Iperf3 Test Client in Background ${list_onus_ut}[1][src] server=${dst_1['dp_iface_ip_qinq']}
478 ... args=-t 30 -p 5202 out_file=${out_file_1}
479 # Wait for the above iperf commands to finish (sleep time depends on -t arg value passed in iperf command)
480 Sleep 35s
481 ${out_0}= Read Output File on System ${out_file_0}
482 ${out_1}= Read Output File on Remote System ${list_onus_ut}[1][src] ${out_file_1}
483 ${actual_upstream_bw_used_0}= Evaluate ${out_0['end']['sum_received']['bits_per_second']}/1000
484 ${limit_up_0_denominator}= Evaluate
485 ... ((${pon_max_bw_capacity_xgs}-${limiting_bw_us_fill_pon_bw}-${list_onus_ut_air_cir}[1][limiting_bw_us_air_cir])/2)
486 ${pct_limit_up_0}= Evaluate
487 ... 100*${actual_upstream_bw_used_0}/${limit_up_0_denominator}
488 Should Be True ${pct_limit_up_0} >= ${lower_margin_pct}
489 ... The upstream bandwidth guarantee was not met (${pct_limit_up_0}% of resv)
490 Should Be True ${pct_limit_up_0} <= ${upper_margin_pct}
491 ... The upstream bandwidth exceeded the limit (${pct_limit_up_0}% of limit)
492 ${actual_upstream_bw_used_1}= Evaluate ${out_1['end']['sum_received']['bits_per_second']}/1000
493 ${limit_up_1_numerator}= Evaluate
494 ... (${actual_upstream_bw_used_1}-${list_onus_ut_air_cir}[1][limiting_bw_us_air_cir])
495 ${limit_up_1_denominator}= Evaluate
496 ... ((${pon_max_bw_capacity_xgs}-${limiting_bw_us_fill_pon_bw}-${list_onus_ut_air_cir}[1][limiting_bw_us_air_cir])/2)
497 ${pct_limit_up_1}= Evaluate
498 ... 100*${limit_up_1_numerator}/${limit_up_1_denominator}
499 Should Be True ${pct_limit_up_1} >= ${lower_margin_pct}
500 ... The upstream bandwidth guarantee was not met (${pct_limit_up_1}% of resv)
501 Should Be True ${pct_limit_up_1} <= ${upper_margin_pct}
502 ... The upstream bandwidth exceeded the limit (${pct_limit_up_1}% of limit)
Emrehan UZUN683bb962021-06-11 11:59:31 +0000503
504 # Sent original sadis file to onos
505 Send File To Onos ${CURDIR}/../../tests/data/flex-ocp-cord-sadis-TT.json
506
Hardik Windlass2013d0c2021-05-20 13:37:25 +0000507*** Keywords ***
Huseyin Ahmet AYDIN42d3b712021-06-10 14:46:17 +0000508Read Output File on Remote System
509 [Arguments] ${src} ${file}
510 [Documentation] Login to ${src} and reads the content of ${file}.
511 Get File from Remote System ${file} ${src['ip']} ${src['user']} ${src['pass']}
512 ${output}= OperatingSystem.Get File ${file}
513 Log ${output}
514 ${object}= Evaluate json.loads(r'''${output}''') json
515 [Return] ${object}
516
517Get File from Remote System
518 [Arguments] ${file} ${ip} ${user} ${pass}=${None}
519 [Documentation] Gets file from the remote system and stores it in /tmp folder on local
520 ${conn_id}= SSHLibrary.Open Connection ${ip}
521 Run Keyword If '${pass}' != '${None}'
522 ... SSHLibrary.Login ${user} ${pass}
523 ... ELSE
524 ... SSHLibrary.Login With Public Key ${user} %{HOME}/.ssh/id_rsa
525 SSHLibrary.Get File ${file} /tmp/
526 SSHLibrary.Close Connection
527
Hardik Windlassd388b462021-05-27 05:40:00 +0000528Read Output File on System
529 [Arguments] ${file}
530 [Documentation] Reads the content of ${file}.
531 ${output}= OperatingSystem.Get File ${file}
532 Log ${output}
533 ${object}= Evaluate json.loads(r'''${output}''') json
534 [Return] ${object}
535
536Run Iperf3 Test Client in Background
537 [Arguments] ${src} ${server} ${args} ${out_file}
538 [Documentation] Login to ${src} and run the iperf3 client against ${server} using ${args} in background.
539 ... Stores the results of the test in ${out_file}.
540 ${output} ${stderr} ${rc}= Execute Remote Command iperf3 -J -c ${server} ${args} > ${out_file} &
541 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
542 Should Be Equal As Integers ${rc} 0
543
Hardik Windlass2013d0c2021-05-20 13:37:25 +0000544Get ONU details with Given Sn and Service
545 [Documentation] This keyword finds the ONU details (as required for multi-tcont test)
546 ... with given serial number and service type
547 ... The keyword, additionally, also verifies the associated upstream bandwidth profile
548 [Arguments] ${onu_sn} ${service_type} ${us_bw_profile}
549 ${matched}= Set Variable False
550 FOR ${I} IN RANGE 0 ${num_all_onus}
551 ${src}= Set Variable ${hosts.src[${I}]}
552 ${dst}= Set Variable ${hosts.dst[${I}]}
553 ${service}= Get Variable Value ${src['service_type']} "null"
554 ${onu}= Get Variable Value ${src['onu']} "null"
555 Continue For Loop If '${onu}' != '${onu_sn}' or '${service}' != '${service_type}'
556 # Additional verification to check upstream bandwidth profile
557 ${of_id}= Get ofID From OLT List ${src['olt']}
558 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']} ${of_id}
559 ${subscriber_id}= Set Variable ${of_id}/${onu_port}
560 ${us_bw} Get Bandwidth Profile Name For Given Subscriber ${subscriber_id} upstreamBandwidthProfile
Hardik Windlass35db2aa2021-06-03 12:41:26 +0000561 ... ${service_type}
Hardik Windlass2013d0c2021-05-20 13:37:25 +0000562 ${matched}= Set Variable If
563 ... '${onu}' == '${onu_sn}' and '${service}' == '${service_type}' and ${us_bw} == '${us_bw_profile}'
564 ... True False
565 Exit For Loop If ${matched}
566 END
567 [Return] ${matched} ${src} ${dst}
568
569Setup Suite
570 [Documentation] Set up the test suite
571 Common Test Suite Setup
572 ${switch_type}= Get Variable Value ${web_power_switch.type}
573 Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type}
574
575
576Clear All Devices Then Create New Device
577 [Documentation] Remove any devices from VOLTHA and ONOS
578 # Remove all devices from voltha and nos
579 Delete All Devices and Verify
580 # Execute normal test Setup Keyword
581 Setup