blob: 8595db88c390ba39ae4d0b989494fb77a387dbfb [file] [log] [blame]
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +00001# Copyright 2017 - present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
14# FIXME Can we use the same test against BBSim and Hardware?
15
16*** Settings ***
17Documentation Test various end-to-end scenarios
18Suite Setup Common Test Suite Setup
19Test Setup Setup
20Test Teardown Teardown
Suchitra Vemuri32dea012020-07-08 16:40:06 -070021Suite Teardown Teardown Suite
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000022Library Collections
23Library String
24Library OperatingSystem
25Library XML
26Library RequestsLibrary
27Library ../../libraries/DependencyLibrary.py
28Resource ../../libraries/onos.robot
29Resource ../../libraries/voltctl.robot
30Resource ../../libraries/voltha.robot
31Resource ../../libraries/utils.robot
32Resource ../../libraries/k8s.robot
33Resource ../../variables/variables.robot
34
35*** Variables ***
36${POD_NAME} flex-ocp-cord
37${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
38${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
39#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
40${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
41${HELM_CHARTS_DIR} ~/helm-charts
42${VOLTHA_POD_NUM} 8
43${NAMESPACE} voltha
44# For below variable value, using deployment name as using grep for
45# parsing radius pod name, we can also use full radius pod name
46${RESTART_POD_NAME} radius
Suchitra Vemuricdc32d82020-07-17 12:24:46 -070047${timeout} 360s
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000048${of_id} 0
49${logical_id} 0
Suchitra Vemuri2fa9bba2020-01-22 17:38:48 -080050${has_dataplane} True
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000051${teardown_device} False
52${scripts} ../../scripts
Hardik Windlasscbcca312020-04-20 21:46:11 +053053${workflow} ATT
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000054
Andy Bavierabeba262020-02-07 16:22:16 -070055# Per-test logging on failure is turned off by default; set this variable to enable
56${container_log_dir} ${None}
57
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000058*** Test Cases ***
59Adding the same OLT before and after enabling the device
60 [Documentation] Create OLT, Create the same OLT again and Check for the Error message
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -080061 ... VOL-2405 VOL-2406
62 [Tags] AddSameOLT functional released
Andy Baviere187eda2020-04-20 15:00:02 -070063 [Setup] Start Logging AddSameOLT
Andy Bavier4a8450e2020-02-04 08:58:37 -070064 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -070065 ... AND Stop Logging AddSameOLT
Suchitra Vemurif7a033c2020-02-26 17:22:41 -080066 # Add OLT device
Suchitra Vemurie9c79bf2020-02-26 23:11:39 -080067 #setup
Andy Bavierc1904dc2020-03-20 11:39:15 -070068 Delete All Devices and Verify
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -080069 Run Keyword and Ignore Error Collect Logs
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000070 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
71 Set Suite Variable ${olt_device_id}
72 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
ubuntu6b6e7d42020-03-02 12:35:42 -080073 ... ${olt_device_id}
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000074 ${rc} ${output}= Run and Return Rc and Output
75 ... ${VOLTCTL_CONFIG}; voltctl device create -t openolt -H ${olt_ip}:${OLT_PORT}
76 Should Not Be Equal As Integers ${rc} 0
Suchitra Vemuri14eec432020-06-19 14:55:47 -070077 Should Contain ${output} device is already pre-provisioned ignore_case=True
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000078 #Enable the created OLT device
79 Enable Device ${olt_device_id}
80 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
81 ... ${olt_serial_number}
82 ${rc} ${output}= Run and Return Rc and Output
83 ... ${VOLTCTL_CONFIG}; voltctl device create -t openolt -H ${olt_ip}:${OLT_PORT}
84 Should Not Be Equal As Integers ${rc} 0
85 Log ${output}
Suchitra Vemuri14eec432020-06-19 14:55:47 -070086 Should Contain ${output} device is already pre-provisioned ignore_case=True
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000087 Log "This OLT is added already and enabled"
Gayathri.Selvan3dfe6c22020-01-27 13:08:55 +000088
Gayathri.Selvan967f5a52020-02-12 06:58:38 +000089Test Disable or Enable different device id which is not in the device list
90 [Documentation] Disable or Enable a device id which is not listed in the voltctl device list
Gayathri.Selvan3dfe6c22020-01-27 13:08:55 +000091 ... command and ensure that error message is shown.
Suchitra Vemuria7dae322020-02-19 22:38:18 -080092 ... VOL-2412-2413
93 [Tags] functional DisableEnableInvalidDevice released
Andy Baviere187eda2020-04-20 15:00:02 -070094 [Setup] Start Logging DisableInvalidDevice
Andy Bavier4a8450e2020-02-04 08:58:37 -070095 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -070096 ... AND Stop Logging DisableInvalidDevice
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -080097 Run Keyword and Ignore Error Collect Logs
Gayathri.Selvan3dfe6c22020-01-27 13:08:55 +000098 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list -o json
99 Should Be Equal As Integers ${rc} 0
100 ${jsondata}= To Json ${output}
101 Log ${jsondata}
102 ${length}= Get Length ${jsondata}
103 @{ids}= Create List
104 FOR ${INDEX} IN RANGE 0 ${length}
105 ${value}= Get From List ${jsondata} ${INDEX}
106 ${device_id}= Get From Dictionary ${value} id
107 Append To List ${ids} ${device_id}
108 END
109 #Create a new fake device id
110 ${fakeDeviceId} Replace String Using Regexp ${device_id} \\d\\d xx count=1
111 Log ${fakeDeviceId}
112 #Ensure that the new id created is not in the device id list
113 List Should Not Contain Value ${ids} ${fakeDeviceId}
114 #Disable fake device id
115 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${fakeDeviceId}
Suchitra Vemuria7e8ad22020-02-11 18:02:40 -0800116 Should Contain ${output} Error while disabling '${fakeDeviceId}'
Gayathri.Selvan967f5a52020-02-12 06:58:38 +0000117 #Disable device for VOL-2413
118 Disable Device ${device_id}
119 #Enable fake device id
120 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device enable ${fakeDeviceId}
121 Should Contain ${output} Error while enabling '${fakeDeviceId}'
suraj gourbaee2c62020-02-03 10:21:32 +0000122
123Check deletion of OLT/ONU before disabling
124 [Documentation] Try deleting OL/ONU before disabling and check error message
125 ... Assuming devices are already created, up and running fine; test1 or sanity was
126 ... executed where all the ONUs are authenticated/DHCP/pingable
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -0800127 ... VOL-2411
Hardik Windlasscbcca312020-04-20 21:46:11 +0530128 #TODO: If this TC gets updated in future, To add support for DT workflow as well (refer JIRA: VOL-2945)
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -0800129 [Tags] functional DeleteBeforeDisableCheck notready
Andy Baviere187eda2020-04-20 15:00:02 -0700130 [Setup] Start Logging DeleteBeforeDisableCheck
Andy Bavier4a8450e2020-02-04 08:58:37 -0700131 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700132 ... AND Stop Logging DeleteBeforeDisableCheck
suraj gourbaee2c62020-02-03 10:21:32 +0000133 #validate olt states
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -0800134 Run Keyword If ${has_dataplane} Clean Up Linux
135 Wait Until Keyword Succeeds ${timeout} 2s Perform Sanity Test
suraj gourbaee2c62020-02-03 10:21:32 +0000136 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
137 ... ${olt_serial_number}
138 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device delete ${olt_device_id}
139 Log ${output}
140 Should Contain ${output} expected-admin-state:DISABLED
141 Wait Until Keyword Succeeds ${timeout} 5s
142 ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number}
143 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
144 Set Global Variable ${of_id}
145 FOR ${I} IN RANGE 0 ${num_onus}
146 ${src}= Set Variable ${hosts.src[${I}]}
147 ${dst}= Set Variable ${hosts.dst[${I}]}
148 ${onu_device_id}= Get Device ID From SN ${src['onu']}
149 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
150 ... ENABLED ACTIVE REACHABLE
151 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
152 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device delete ${onu_device_id}
153 Log ${output}
154 Should Contain ${output} expected-admin-state:DISABLED
155 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
156 ... ENABLED ACTIVE REACHABLE
157 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
158 END
suraj gourb3160412020-02-04 06:11:31 +0000159
160Check disabling of pre-provisioned OLT before enabling
161 [Documentation] Create OLT, disable same OLT, check error message and validates ONU
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -0800162 ... VOL-2414
163 [Tags] functional DisablePreprovisionedOLTCheck
Andy Baviere187eda2020-04-20 15:00:02 -0700164 [Setup] Run Keywords Start Logging DisablePreprovisionedOLTCheck
Andy Bavierde53a1f2020-03-25 14:53:56 -0700165 ... AND Delete All Devices and Verify
Andy Bavier4a8450e2020-02-04 08:58:37 -0700166 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700167 ... AND Stop Logging DisablePreprovisionedOLTCheck
Andy Bavierde53a1f2020-03-25 14:53:56 -0700168 Sleep 180s
Suchitra Vemuri9a6dd6d2020-02-28 17:46:26 -0800169 Run Keyword and Ignore Error Collect Logs
suraj gourb3160412020-02-04 06:11:31 +0000170 #create/preprovision device
171 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
172 Set Suite Variable ${olt_device_id}
173 #validate olt states
174 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
ubuntu6b6e7d42020-03-02 12:35:42 -0800175 ... ${olt_device_id}
suraj gourb3160412020-02-04 06:11:31 +0000176 #Try disabling pre-provisioned OLT
177 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
Andy Bavierde53a1f2020-03-25 14:53:56 -0700178 Should Not Be Equal As Integers ${rc} 0
suraj gourb3160412020-02-04 06:11:31 +0000179 Log ${output}
180 Should Contain ${output} invalid-admin-state:PREPROVISIONED
181 #Enable OLT
182 Enable Device ${olt_device_id}
183 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
184 ... ${olt_serial_number}
185 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
186 Set Suite Variable ${logical_id}
Hardik Windlasscbcca312020-04-20 21:46:11 +0530187 ${onu_reason}= Set Variable If '${workflow}' == 'DT' initial-mib-downloaded omci-flows-pushed
suraj gourb3160412020-02-04 06:11:31 +0000188 FOR ${I} IN RANGE 0 ${num_onus}
189 ${src}= Set Variable ${hosts.src[${I}]}
190 ${dst}= Set Variable ${hosts.dst[${I}]}
191 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
192 ... ENABLED ACTIVE REACHABLE
Hardik Windlasscbcca312020-04-20 21:46:11 +0530193 ... ${src['onu']} onu=True onu_reason=${onu_reason}
suraj gourb3160412020-02-04 06:11:31 +0000194 END
Hema526eceb2020-02-04 13:11:40 +0530195
196Disable and Delete the logical device directly
197 [Documentation] Disable and delete the logical device directly is not possible
198 ... since it is allowed only through OLT device deletion.
Suchitra Vemuri5f66f422020-03-02 16:43:49 -0800199 ... VOL-2418
200 [Tags] functional DisableDelete_LogicalDevice
Andy Baviere187eda2020-04-20 15:00:02 -0700201 [Setup] Run Keywords Start Logging DisableDelete_LogicalDevice
Andy Bavierde53a1f2020-03-25 14:53:56 -0700202 ... AND Delete All Devices and Verify
Andy Bavier4a8450e2020-02-04 08:58:37 -0700203 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700204 ... AND Stop Logging DisableDelete_LogicalDevice
Hema526eceb2020-02-04 13:11:40 +0530205 Run Keyword If ${has_dataplane} Sleep 180s
206 #create/preprovision OLT device
207 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
208 Set Suite Variable ${olt_device_id}
209 #validate olt states
210 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
ubuntu6b6e7d42020-03-02 12:35:42 -0800211 ... ${olt_device_id}
Hema526eceb2020-02-04 13:11:40 +0530212 #Enable the created OLT device
213 Enable Device ${olt_device_id}
214 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
215 ... ${olt_serial_number}
216 #Check whether logical devices are also created
217 ${rc} ${output}= Run and Return Rc and Output
218 ... ${VOLTCTL_CONFIG}; voltctl logicaldevice list
219 Should Be Equal As Integers ${rc} 0
220 Log ${output}
221 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
222 Should Not Be Empty ${logical_id}
223 ${rc} ${output}= Run and Return Rc and Output
224 ... ${VOLTCTL_CONFIG}; voltctl logicaldevice disable ${logical_id}
Andy Bavierde53a1f2020-03-25 14:53:56 -0700225 Should Not Be Equal As Integers ${rc} 0
Hema526eceb2020-02-04 13:11:40 +0530226 Log ${output}
227 Should Contain '${output}' Unknown command
228 ${rc} ${output1}= Run and Return Rc and Output
229 ... ${VOLTCTL_CONFIG}; voltctl logicaldevice delete ${logical_id}
Andy Bavierde53a1f2020-03-25 14:53:56 -0700230 Should Not Be Equal As Integers ${rc} 0
Hema526eceb2020-02-04 13:11:40 +0530231 Log ${output1}
232 Should Contain '${output1}' Unknown command
suraj goura4166222020-02-03 12:09:11 +0000233
234Check logical device creation and deletion
235 [Documentation] Deletes all devices, checks logical device, creates devices again and checks
236 ... logical device, flows, ports
Suchitra Vemuri5f66f422020-03-02 16:43:49 -0800237 ... VOL-2416 VOL-2417
238 [Tags] functional LogicalDeviceCheck
Andy Baviere187eda2020-04-20 15:00:02 -0700239 [Setup] Start Logging LogicalDeviceCheck
Andy Bavier4a8450e2020-02-04 08:58:37 -0700240 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700241 ... AND Stop Logging LogicalDeviceCheck
Andy Bavierde53a1f2020-03-25 14:53:56 -0700242 Delete All Devices and Verify
suraj goura4166222020-02-03 12:09:11 +0000243 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
244 Should Be Empty ${logical_id}
245 Run Keyword If ${has_dataplane} Sleep 180s
246 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
247 Set Suite Variable ${olt_device_id}
248 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
ubuntu6b6e7d42020-03-02 12:35:42 -0800249 ... ${olt_device_id}
suraj goura4166222020-02-03 12:09:11 +0000250 Enable Device ${olt_device_id}
251 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
252 ... ${olt_serial_number}
253 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
254 Should Not Be Empty ${logical_id}
255 ${rc} ${output}= Run and Return Rc and Output
256 ... ${VOLTCTL_CONFIG}; voltctl logicaldevice list
257 Should Be Equal As Integers ${rc} 0
258 Log ${output}
259 Should Contain ${output} ${olt_device_id}
260 Set Suite Variable ${logical_id}
261 Wait Until Keyword Succeeds ${timeout} 5s Validate Logical Device Ports ${logical_id}
262 Wait Until Keyword Succeeds ${timeout} 5s Validate Logical Device Flows ${logical_id}
263 Run Keyword and Ignore Error Collect Logs
Suchitra Vemurie9c79bf2020-02-26 23:11:39 -0800264
265*** Keywords ***
266Setup Suite
267 [Documentation] Set up the test suite
268 Common Test Suite Setup
269
Suchitra Vemuri32dea012020-07-08 16:40:06 -0700270Teardown Suite
271 [Documentation] Teardown suite
272 Run Keyword If ${has_dataplane} Clean Up Linux
Suchitra Vemuri1d8e8172020-06-17 17:43:56 -0700273 #Restore all ONUs
274# Run Keyword If ${has_dataplane} RestoreONUs ${num_onus}