blob: 28d4e5f2eacb20f44695492068313b6d03506f5f [file] [log] [blame]
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -07001# Copyright 2017 - present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
14# FIXME Can we use the same test against BBSim and Hardware?
15
16*** Settings ***
17Documentation Test various functional end-to-end scenarios for TT workflow
18Suite Setup Setup Suite
19Test Setup Setup
20Test Teardown Teardown
21Suite Teardown Teardown Suite
22Library Collections
23Library String
24Library OperatingSystem
25Library XML
26Library RequestsLibrary
27Library ../../libraries/DependencyLibrary.py
28Resource ../../libraries/onos.robot
29Resource ../../libraries/voltctl.robot
30Resource ../../libraries/voltha.robot
31Resource ../../libraries/utils.robot
32Resource ../../libraries/k8s.robot
33Resource ../../variables/variables.robot
34Resource ../../libraries/power_switch.robot
TorstenThieme78c09502022-01-19 13:44:19 +000035Resource ../../libraries/onu_utilities.robot
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070036
37*** Variables ***
38${POD_NAME} flex-ocp-cord
39${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
40${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
41#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
42${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
43${HELM_CHARTS_DIR} ~/helm-charts
44${VOLTHA_POD_NUM} 8
45${NAMESPACE} voltha
Hardik Windlass4288c6a2021-09-28 07:22:06 +000046${INFRA_NAMESPACE} default
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070047# For below variable value, using deployment name as using grep for
48# parsing radius pod name, we can also use full radius pod name
49${RESTART_POD_NAME} radius
50${timeout} 60s
51${of_id} 0
52${logical_id} 0
53${has_dataplane} True
Hardik Windlass04896f62021-03-05 16:15:11 +053054${teardown_device} True
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070055${scripts} ../../scripts
TorstenThieme78c09502022-01-19 13:44:19 +000056${data_dir} ../data
Hardik Windlassc4d1fd62022-04-12 13:12:28 +000057# flag to reboot OLT through Power Switch
58${power_cycle_olt} False
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070059
60# Per-test logging on failure is turned off by default; set this variable to enable
61${container_log_dir} ${None}
62
Matteo Scandoloda1c64b2021-07-20 10:14:49 -070063# logging flag to enable Collect Logs, can be passed via the command line too
64# example: -v logging:False
65${logging} True
66
Emrehan UZUN62748282021-05-21 08:16:52 +000067${suppressaddsubscriber} True
68
Hardik Windlassc609eb02022-02-22 11:28:37 +000069# flag to choose if mac-learning is enabled, or disabled (i.e. mac-address is configured)
70# example: -v with_maclearning:True
71${with_maclearning} False
72
Hardik Windlassb1bda362021-11-24 11:54:36 +000073# flag to choose the subscriber provisioning command type in ONOS
74# TT often provision a single services for a subscriber (eg: hsia, voip, ...) one after the other.
75# if set to True, command used is "volt-add-subscriber-unitag"
76# if set to False, comand used is "volt-add-subscriber-access"
77${unitag_sub} False
78
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070079*** Test Cases ***
Hardik Windlassc4d1fd62022-04-12 13:12:28 +000080Reboot TT ONUs and OLTs Physically - Clean Up
81 [Documentation] This test reboots ONUs and OLTs physically before execution all the tests
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070082 ... Test case runs only on the PODs that are configured with PowerSwitch that
83 ... controls the power off/on ONUs/OLT remotely (simulating a physical reboot)
Hardik Windlassc4d1fd62022-04-12 13:12:28 +000084 [Tags] functionalTT PowerSwitch RebootAllTTONUsOLTs
85 [Setup] Start Logging RebootAllTTONUsOLTs
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070086 [Teardown] Run Keywords Collect Logs
Hardik Windlassc4d1fd62022-04-12 13:12:28 +000087 ... AND Stop Logging RebootAllTTONUsOLTs
88 Perform Reboot ONUs and OLTs Physically ${power_cycle_olt}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070089
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -070090Sanity E2E Test for TT (HSIA, VoD, VoIP)
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -070091 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
92 ... Validate successful DHCP/E2E ping (no EAPOL and DHCP flows) for the tech profile that is used
93 ... Traffic sent with same vlan from different RGs,
94 ... should reach the NNI port on the OLT with the expected double tagged vlan ids
95 ... Inner vlans from the RG should not change
96 [Tags] sanityTT
97 [Setup] Run Keywords Start Logging SanityTestTT
98 ... AND Setup
99 [Teardown] Run Keywords Collect Logs
100 ... AND Stop Logging SanityTestTT
101 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlassc609eb02022-02-22 11:28:37 +0000102 Perform Sanity Test TT maclearning_enabled=${with_maclearning}
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700103
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700104Sanity E2E Test for TT (MCAST)
105 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
106 ... Validate successful DHCP/E2E ping (no EAPOL and DHCP flows) for the tech profile that is used
107 ... Traffic sent with same vlan from different RGs,
108 ... should reach the NNI port on the OLT with the expected double tagged vlan ids
109 ... Inner vlans from the RG should not change
110 [Tags] sanityTT-MCAST
111 [Setup] Run Keyword Start Logging SanityTestTT-MCAST
112 [Teardown] Run Keywords Collect Logs
113 ... AND Stop Logging SanityTestTT-MCAST
114 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000115 Perform Sanity Test TT MCAST
Suchitra Vemuri85cb7d62020-07-16 23:46:16 -0700116
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000117Test Disable and Delete OLT for TT
118 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
119 ... Assuming that all the ONUs are DHCP/pingable (i.e. assuming sanityTt test was executed)
120 ... Perform disable on the OLT and validate ONUs state and that the pings do not succeed
121 ... Perform delete on the OLT, Re-do Setup (Recreate the OLT) and Perform Sanity Test TT
Huseyin Ahmet AYDIN45922c82021-05-27 12:37:32 +0000122 [Tags] functionalTT DisableDeleteOLTTt
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000123 [Setup] Start Logging DisableDeleteOLTTt
124 [Teardown] Run Keywords Collect Logs
125 ... AND Stop Logging DisableDeleteOLTTt
Huseyin Ahmet AYDIN45922c82021-05-27 12:37:32 +0000126 @{particular_onu_device_port}= Create List
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000127 FOR ${I} IN RANGE 0 ${num_all_onus}
128 ${src}= Set Variable ${hosts.src[${I}]}
129 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
130 ... ${of_id} ${src['uni_id']}
131 Append To List ${particular_onu_device_port} ${onu_port}
132 END
133 ${list_onu_port}= Remove Duplicates ${particular_onu_device_port}
134 ${num_of_provisioned_onus}= Get Length ${list_onu_port}
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000135 # Disable and Validate OLT Device
136 FOR ${I} IN RANGE 0 ${olt_count}
137 ${olt_serial_number}= Get From Dictionary ${olt_ids}[${I}] sn
138 ${olt_device_id}= Get OLTDeviceID From OLT List ${olt_serial_number}
139 Disable Device ${olt_device_id}
140 ${of_id}= Get ofID From OLT List ${olt_serial_number}
141 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
142 ... Validate OLT Device DISABLED UNKNOWN REACHABLE
143 ... ${olt_serial_number}
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000144 ${num_onus}= Set Variable ${list_olts}[${I}][onucount]
145 # Validate ONUs
146 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate ONUs After OLT Disable
147 ... ${num_onus} ${olt_serial_number}
148 # Verify ONOS Flows
Hardik Windlass3a294892021-11-23 17:05:29 +0000149 # When we disable the device should only have 3 default flows LLDP, IGMP and DHCP
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000150 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
Hardik Windlass3a294892021-11-23 17:05:29 +0000151 ... Verify Added Flow Count for OLT TT ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id} 3
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000152 # Verify VOLTHA Flows
Hardik Windlass3a294892021-11-23 17:05:29 +0000153 Run Keyword Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Flows 3
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000154 ... ${olt_device_id}
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000155 # Delete OLT and Validate Empty Device List
156 Delete Device ${olt_device_id}
157 # Check that the OLT and the ONUs are actually removed from the system
158 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device Removed
159 ... ${olt_serial_number}
160 Run Keyword and Continue On Failure Validate all ONUS for OLT Removed ${num_all_onus} ${hosts}
161 ... ${olt_serial_number} ${timeout}
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000162 Wait Until Keyword Succeeds ${timeout} 5s
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000163 ... Verify Device Flows Removed ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${of_id}
164 END
165 # Re-do Setup (Recreate the OLT) and Perform Sanity Test TT
166 Run Keyword Setup
167 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000168 Perform Sanity Tests TT
Huseyin Ahmet AYDIN9ea27aa2021-05-20 14:32:29 +0000169
Emrehan UZUN62748282021-05-21 08:16:52 +0000170Verify re-provisioning subscriber after removing provisoned subscriber for TT
171 [Documentation] Removing/Readding a particular subscriber should have no effect on any other subscriber.
172 [Tags] functionalTT Readd-subscriber-TT
173 [Setup] Start Logging Readd-subscriber-TT
174 [Teardown] Run Keywords Collect Logs
175 ... AND Stop Logging Readd-subscriber-TT
176 Run Keyword If ${has_dataplane} Clean Up Linux
177 FOR ${I} IN RANGE 0 ${num_all_onus}
178 ${src}= Set Variable ${hosts.src[${I}]}
179 ${dst}= Set Variable ${hosts.dst[${I}]}
180 ${service_type}= Get Variable Value ${src['service_type']} "null"
181 ${of_id}= Get ofID From OLT List ${src['olt']}
182 ${onu_device_id}= Get Device ID From SN ${src['onu']}
183 ${onu_port}= Wait Until Keyword Succeeds ${timeout} 2s Get ONU Port in ONOS ${src['onu']}
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000184 ... ${of_id} ${src['uni_id']}
Emrehan UZUN62748282021-05-21 08:16:52 +0000185 # Remove Subscriber Access
Hardik Windlassb1bda362021-11-24 11:54:36 +0000186 ${del_sub_cmd}= Run Keyword If ${unitag_sub}
187 ... Catenate volt-remove-subscriber-unitag --tpId ${src['tp_id']} --sTag ${src['s_tag']}
188 ... --cTag ${src['c_tag']} ${src['onu']}-${src['uni_id']}
189 ... ELSE
190 ... Set Variable volt-remove-subscriber-access ${of_id} ${onu_port}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000191 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
Hardik Windlassb1bda362021-11-24 11:54:36 +0000192 ... ${ONOS_SSH_PORT} ${del_sub_cmd}
Emrehan UZUN62748282021-05-21 08:16:52 +0000193 Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast'
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000194 ... Wait Until Keyword Succeeds ${timeout} 5s
Emrehan UZUN62748282021-05-21 08:16:52 +0000195 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
196 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
Girish Gowdrab1ef7932021-10-29 10:57:47 -0700197 ... ELSE Sleep 10s Wait for flows to be deleted
Hardik Windlass88075f92022-01-25 12:19:45 +0000198 Run Keyword If ${unitag_sub} and '${service_type}' != 'mcast'
199 ... Wait Until Keyword Succeeds ${timeout} 2s Verify UniTag Subscriber ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
200 ... ${of_id} ${onu_port} ${src['s_tag']} ${src['c_tag']} ${src['tp_id']} False
Emrehan UZUN62748282021-05-21 08:16:52 +0000201 # Verify VOLTHA flows for ONU under test is Zero
Hardik Windlass1ed2eee2021-06-25 09:51:03 +0000202 # TODO: Fix ${onu_flows} calculations based on UNIs provisioned
203 # Wait Until Keyword Succeeds ${timeout} 5s Validate Device Flows
204 # ... ${onu_device_id} 0
Emrehan UZUN62748282021-05-21 08:16:52 +0000205 # Add Subscriber Access
Hardik Windlassb1bda362021-11-24 11:54:36 +0000206 ${add_sub_cmd}= Run Keyword If ${unitag_sub}
207 ... Catenate volt-add-subscriber-unitag --tpId ${src['tp_id']} --sTag ${src['s_tag']}
208 ... --cTag ${src['c_tag']} ${src['onu']}-${src['uni_id']}
209 ... ELSE
210 ... Set Variable volt-add-subscriber-access ${of_id} ${onu_port}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000211 Wait Until Keyword Succeeds ${timeout} 2s Execute ONOS CLI Command use single connection ${ONOS_SSH_IP}
Hardik Windlassb1bda362021-11-24 11:54:36 +0000212 ... ${ONOS_SSH_PORT} ${add_sub_cmd}
Hardik Windlass88075f92022-01-25 12:19:45 +0000213 Run Keyword If ${unitag_sub} and '${service_type}' != 'mcast'
214 ... Wait Until Keyword Succeeds ${timeout} 2s Verify UniTag Subscriber ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
215 ... ${of_id} ${onu_port} ${src['s_tag']} ${src['c_tag']} ${src['tp_id']}
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000216 Wait Until Keyword Succeeds ${timeout} 5s
Emrehan UZUN62748282021-05-21 08:16:52 +0000217 ... Validate Device ENABLED ACTIVE
218 ... REACHABLE ${src['onu']} onu=True onu_reason=omci-flows-pushed
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000219 Run Keyword If ${has_dataplane} and '${service_type}' != 'mcast'
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000220 ... Sanity Test TT one ONU ${src} ${dst} ${suppressaddsubscriber}
Hardik Windlass5a2d1f42021-11-12 12:52:04 +0000221 ... ELSE IF ${has_dataplane} and '${service_type}' == 'mcast'
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000222 ... Sanity Test TT MCAST one ONU ${src} ${dst} ${suppressaddsubscriber}
Emrehan UZUN62748282021-05-21 08:16:52 +0000223 END
224
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000225Test Disable and Enable ONU for TT
226 [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
227 ... Assuming that all the ONUs are DHCP/pingable (i.e. assuming sanitytt test was executed)
228 ... Perform disable on the ONUs and validate that the pings do not succeed
229 ... Perform enable on the ONUs and validate that the pings are successful
230 [Tags] functionalTT DisableEnableONUTT
Girish Gowdra8fd96962021-12-14 16:20:04 +0530231 [Setup] Run Keywords Start Logging DisableEnableONUTT
232 ... AND Run Keyword If ${has_dataplane} Set Non-Critical Tag for XGSPON Tech
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000233 [Teardown] Run Keywords Collect Logs
234 ... AND Stop Logging DisableEnableONUTT
TorstenThieme9b25aab2021-12-16 15:59:45 +0000235 @{onu_list}= Create List
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000236 FOR ${I} IN RANGE 0 ${num_all_onus}
237 ${src}= Set Variable ${hosts.src[${I}]}
238 ${dst}= Set Variable ${hosts.dst[${I}]}
TorstenThieme9b25aab2021-12-16 15:59:45 +0000239 ${sn}= Set Variable ${src['onu']}
240 # make sure all actions do only once per onu
241 ${onu_id}= Get Index From List ${onu_list} ${sn}
242 Continue For Loop If -1 != ${onu_id}
243 Append To List ${onu_list} ${sn}
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000244 ${of_id}= Get ofID From OLT List ${src['olt']}
245 ${onu_device_id}= Get Device ID From SN ${src['onu']}
TorstenThieme9b25aab2021-12-16 15:59:45 +0000246 ${onu_port}= Get Onu Ports in ONOS For ALL UNI per ONU ${src['onu']} ${of_id}
247 Log ${onu_port}
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000248 Disable Device ${onu_device_id}
249 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s
250 ... Validate Device DISABLED UNKNOWN
TorstenThieme9b25aab2021-12-16 15:59:45 +0000251 ... REACHABLE ${src['onu']} onu=True onu_reason=tech-profile-config-delete-success
252 Wait For All UNI Ports Are Disabled per ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000253 Run Keyword If ${has_dataplane} Run Keyword And Continue On Failure
Hardik Windlass5083b3a2021-11-11 12:16:22 +0000254 ... Wait Until Keyword Succeeds ${timeout} 2s
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000255 ... Check Ping False ${dst['dp_iface_ip_qinq']} ${src['dp_iface_name']}
256 ... ${src['ip']} ${src['user']} ${src['pass']} ${src['container_type']} ${src['container_name']}
257 Sleep 5s
258 Enable Device ${onu_device_id}
TorstenThieme9b25aab2021-12-16 15:59:45 +0000259 Wait For All UNI Ports Are Enabled per ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT} ${src['onu']}
Girish Gowdrafc0bdf22021-12-06 16:57:50 +0530260 # Workaround for issue seen in VOL-4489. Keep this workaround until VOL-4489 is fixed.
261 Run Keyword If ${has_dataplane} Reboot XGSPON ONU ${src['olt']} ${src['onu']} omci-flows-pushed
262 # Workaround ends here for issue seen in VOL-4489.
TorstenThieme9b25aab2021-12-16 15:59:45 +0000263 Run Keyword If ${has_dataplane} Clean Up Linux
264 Run Keyword If ${has_dataplane} Wait For All UNI Ports Are Enabled per ONU ${ONOS_SSH_IP} ${ONOS_SSH_PORT}
265 ... ${src['onu']
266 Perform Sanity Tests TT ${suppressaddsubscriber}
Emrehan UZUNec59bea2021-05-27 13:45:57 +0000267 END
268
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700269*** Keywords ***
270Setup Suite
271 [Documentation] Set up the test suite
272 Common Test Suite Setup
TorstenThieme78c09502022-01-19 13:44:19 +0000273 # pre-load tech profiles to use single instance control for HSIA and VoIP, multi instance control for MCAST
274 Run Keyword If ${unitag_sub} and not ${has_dataplane} Set Tech Profile TT-HSIA ${INFRA_NAMESPACE} 64
275 Run Keyword If ${unitag_sub} and not ${has_dataplane} Set Tech Profile TT-VoIP ${INFRA_NAMESPACE} 65
276 Run Keyword If ${unitag_sub} and not ${has_dataplane} Set Tech Profile TT-multi-uni-MCAST-AdditionalBW-None
277 ... ${INFRA_NAMESPACE} 66
Suchitra Vemuri2f1e07d2020-06-26 19:18:01 -0700278 ${switch_type}= Get Variable Value ${web_power_switch.type}
279 Run Keyword If "${switch_type}"!="" Set Global Variable ${powerswitch_type} ${switch_type}
280
281
282Clear All Devices Then Create New Device
283 [Documentation] Remove any devices from VOLTHA and ONOS
284 # Remove all devices from voltha and nos
285 Delete All Devices and Verify
286 # Execute normal test Setup Keyword
287 Setup
288
Suchitra Vemuri32dea012020-07-08 16:40:06 -0700289
290Teardown Suite
291 [Documentation] Tear down steps for the suite
Matteo Scandolo6a90bda2021-11-30 11:31:38 -0800292 Start Logging Setup or Teardown Teardown-${SUITE NAME}
Suchitra Vemuri32dea012020-07-08 16:40:06 -0700293 Run Keyword If ${has_dataplane} Clean Up Linux
Hardik Windlassc609eb02022-02-22 11:28:37 +0000294 Run Keyword If ${teardown_device} Delete All Devices And Verify maclearning_enabled=${with_maclearning}
TorstenThieme4e2168e2021-06-22 14:01:47 +0000295 Close All ONOS SSH Connections
TorstenThieme78c09502022-01-19 13:44:19 +0000296 # remove pre-loaded tech profiles
297 Set Suite Variable ${TechProfile} ${EMPTY}
298 Run Keyword If ${unitag_sub} and not ${has_dataplane} Remove Tech Profile ${INFRA_NAMESPACE} 64
299 Run Keyword If ${unitag_sub} and not ${has_dataplane} Remove Tech Profile ${INFRA_NAMESPACE} 65
300 Run Keyword If ${unitag_sub} and not ${has_dataplane} Remove Tech Profile ${INFRA_NAMESPACE} 66
Matteo Scandolo6a90bda2021-11-30 11:31:38 -0800301 Stop Logging Setup or Teardown Teardown-${SUITE NAME}