blob: ab53a7b86ceabc093caa94f7938c6300397db81b [file] [log] [blame]
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +00001# Copyright 2017 - present Open Networking Foundation
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
14# FIXME Can we use the same test against BBSim and Hardware?
15
16*** Settings ***
17Documentation Test various end-to-end scenarios
18Suite Setup Common Test Suite Setup
19Test Setup Setup
20Test Teardown Teardown
21#Suite Teardown Teardown Suite
22Library Collections
23Library String
24Library OperatingSystem
25Library XML
26Library RequestsLibrary
27Library ../../libraries/DependencyLibrary.py
28Resource ../../libraries/onos.robot
29Resource ../../libraries/voltctl.robot
30Resource ../../libraries/voltha.robot
31Resource ../../libraries/utils.robot
32Resource ../../libraries/k8s.robot
33Resource ../../variables/variables.robot
34
35*** Variables ***
36${POD_NAME} flex-ocp-cord
37${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
38${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
39#${KUBERNETES_CONFIGS_DIR} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
40${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
41${HELM_CHARTS_DIR} ~/helm-charts
42${VOLTHA_POD_NUM} 8
43${NAMESPACE} voltha
44# For below variable value, using deployment name as using grep for
45# parsing radius pod name, we can also use full radius pod name
46${RESTART_POD_NAME} radius
Suchitra Vemuribc5e3162020-01-23 11:21:10 -080047${timeout} 90s
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000048${of_id} 0
49${logical_id} 0
Suchitra Vemuri2fa9bba2020-01-22 17:38:48 -080050${has_dataplane} True
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000051${teardown_device} False
52${scripts} ../../scripts
53
Andy Bavierabeba262020-02-07 16:22:16 -070054# Per-test logging on failure is turned off by default; set this variable to enable
55${container_log_dir} ${None}
56
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000057*** Test Cases ***
58Adding the same OLT before and after enabling the device
59 [Documentation] Create OLT, Create the same OLT again and Check for the Error message
Suchitra Vemuria7dae322020-02-19 22:38:18 -080060 [Tags] VOL-2405 VOL-2406 AddSameOLT functional released
Andy Bavierabeba262020-02-07 16:22:16 -070061 [Setup] Run Keywords Announce Message START TEST AddSameOLT
62 ... AND Start Logging AddSameOLT
Andy Bavier4a8450e2020-02-04 08:58:37 -070063 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -070064 ... AND Stop Logging AddSameOLT
Andy Bavier4a8450e2020-02-04 08:58:37 -070065 ... AND Announce Message END TEST AddSameOLT
Suchitra Vemuribd7fcd22020-01-22 19:08:32 -080066 Run Keyword If ${has_dataplane} Delete Device and Verify
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000067 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
68 Set Suite Variable ${olt_device_id}
Suchitra Vemuri1d0d0222020-02-12 17:17:19 -080069 ${timeout} Set Variable 180s
Gayathri.Selvanee4a91b2020-01-17 06:49:53 +000070 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
71 ... ${EMPTY} ${olt_device_id}
72 ${rc} ${output}= Run and Return Rc and Output
73 ... ${VOLTCTL_CONFIG}; voltctl device create -t openolt -H ${olt_ip}:${OLT_PORT}
74 Should Not Be Equal As Integers ${rc} 0
75 Should Contain ${output} Device is already pre-provisioned
76 #Enable the created OLT device
77 Enable Device ${olt_device_id}
78 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
79 ... ${olt_serial_number}
80 ${rc} ${output}= Run and Return Rc and Output
81 ... ${VOLTCTL_CONFIG}; voltctl device create -t openolt -H ${olt_ip}:${OLT_PORT}
82 Should Not Be Equal As Integers ${rc} 0
83 Log ${output}
84 Should Contain ${output} Device is already pre-provisioned
85 Log "This OLT is added already and enabled"
Gayathri.Selvan3dfe6c22020-01-27 13:08:55 +000086
Gayathri.Selvan967f5a52020-02-12 06:58:38 +000087Test Disable or Enable different device id which is not in the device list
88 [Documentation] Disable or Enable a device id which is not listed in the voltctl device list
Gayathri.Selvan3dfe6c22020-01-27 13:08:55 +000089 ... command and ensure that error message is shown.
Suchitra Vemuria7dae322020-02-19 22:38:18 -080090 ... VOL-2412-2413
91 [Tags] functional DisableEnableInvalidDevice released
Andy Bavierabeba262020-02-07 16:22:16 -070092 [Setup] Run Keywords Announce Message START TEST DisableInvalidDevice
93 ... AND Start Logging DisableInvalidDevice
Andy Bavier4a8450e2020-02-04 08:58:37 -070094 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -070095 ... AND Stop Logging DisableInvalidDevice
Andy Bavier4a8450e2020-02-04 08:58:37 -070096 ... AND Announce Message END TEST DisableInvalidDevice
Gayathri.Selvan3dfe6c22020-01-27 13:08:55 +000097 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device list -o json
98 Should Be Equal As Integers ${rc} 0
99 ${jsondata}= To Json ${output}
100 Log ${jsondata}
101 ${length}= Get Length ${jsondata}
102 @{ids}= Create List
103 FOR ${INDEX} IN RANGE 0 ${length}
104 ${value}= Get From List ${jsondata} ${INDEX}
105 ${device_id}= Get From Dictionary ${value} id
106 Append To List ${ids} ${device_id}
107 END
108 #Create a new fake device id
109 ${fakeDeviceId} Replace String Using Regexp ${device_id} \\d\\d xx count=1
110 Log ${fakeDeviceId}
111 #Ensure that the new id created is not in the device id list
112 List Should Not Contain Value ${ids} ${fakeDeviceId}
113 #Disable fake device id
114 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${fakeDeviceId}
Suchitra Vemuria7e8ad22020-02-11 18:02:40 -0800115 Should Contain ${output} Error while disabling '${fakeDeviceId}'
Gayathri.Selvan967f5a52020-02-12 06:58:38 +0000116 #Disable device for VOL-2413
117 Disable Device ${device_id}
118 #Enable fake device id
119 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device enable ${fakeDeviceId}
120 Should Contain ${output} Error while enabling '${fakeDeviceId}'
suraj gourbaee2c62020-02-03 10:21:32 +0000121
122Check deletion of OLT/ONU before disabling
123 [Documentation] Try deleting OL/ONU before disabling and check error message
124 ... Assuming devices are already created, up and running fine; test1 or sanity was
125 ... executed where all the ONUs are authenticated/DHCP/pingable
126 [Tags] VOL-2411 DeleteBeforeDisableCheck notready
Andy Bavierabeba262020-02-07 16:22:16 -0700127 [Setup] Run Keywords Announce Message START TEST DeleteBeforeDisableCheck
128 ... AND Start Logging DeleteBeforeDisableCheck
Andy Bavier4a8450e2020-02-04 08:58:37 -0700129 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700130 ... AND Stop Logging DeleteBeforeDisableCheck
Andy Bavier4a8450e2020-02-04 08:58:37 -0700131 ... AND Announce Message END TEST DeleteBeforeDisableCheck
suraj gourbaee2c62020-02-03 10:21:32 +0000132 #validate olt states
133 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
134 ... ${olt_serial_number}
135 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device delete ${olt_device_id}
136 Log ${output}
137 Should Contain ${output} expected-admin-state:DISABLED
138 Wait Until Keyword Succeeds ${timeout} 5s
139 ... Validate OLT Device ENABLED ACTIVE REACHABLE ${olt_serial_number}
140 ${of_id}= Wait Until Keyword Succeeds ${timeout} 15s Validate OLT Device in ONOS ${olt_serial_number}
141 Set Global Variable ${of_id}
142 FOR ${I} IN RANGE 0 ${num_onus}
143 ${src}= Set Variable ${hosts.src[${I}]}
144 ${dst}= Set Variable ${hosts.dst[${I}]}
145 ${onu_device_id}= Get Device ID From SN ${src['onu']}
146 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
147 ... ENABLED ACTIVE REACHABLE
148 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
149 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device delete ${onu_device_id}
150 Log ${output}
151 Should Contain ${output} expected-admin-state:DISABLED
152 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
153 ... ENABLED ACTIVE REACHABLE
154 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
155 END
156 Run Keyword and Ignore Error Collect Logs
suraj gourb3160412020-02-04 06:11:31 +0000157
158Check disabling of pre-provisioned OLT before enabling
159 [Documentation] Create OLT, disable same OLT, check error message and validates ONU
160 [Tags] VOL-2414 DisablePreprovisionedOLTCheck notready
Andy Bavier4a8450e2020-02-04 08:58:37 -0700161 [Setup] Run Keywords Announce Message START TEST DisablePreprovisionedOLTCheck
Andy Bavierabeba262020-02-07 16:22:16 -0700162 ... AND Start Logging DisablePreprovisionedOLTCheck
Andy Bavier4a8450e2020-02-04 08:58:37 -0700163 ... AND Delete Device and Verify
164 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700165 ... AND Stop Logging DisablePreprovisionedOLTCheck
Andy Bavier4a8450e2020-02-04 08:58:37 -0700166 ... AND Announce Message END TEST DisablePreprovisionedOLTCheck
suraj gourb3160412020-02-04 06:11:31 +0000167 Run Keyword If ${has_dataplane} Sleep 180s
168 #create/preprovision device
169 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
170 Set Suite Variable ${olt_device_id}
171 #validate olt states
172 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
173 ... ${EMPTY} ${olt_device_id}
174 #Try disabling pre-provisioned OLT
175 ${rc} ${output}= Run and Return Rc and Output ${VOLTCTL_CONFIG}; voltctl device disable ${olt_device_id}
176 Should Be Equal As Integers ${rc} 0
177 Log ${output}
178 Should Contain ${output} invalid-admin-state:PREPROVISIONED
179 #Enable OLT
180 Enable Device ${olt_device_id}
181 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
182 ... ${olt_serial_number}
183 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
184 Set Suite Variable ${logical_id}
185 FOR ${I} IN RANGE 0 ${num_onus}
186 ${src}= Set Variable ${hosts.src[${I}]}
187 ${dst}= Set Variable ${hosts.dst[${I}]}
188 Run Keyword And Continue On Failure Wait Until Keyword Succeeds ${timeout} 5s Validate Device
189 ... ENABLED ACTIVE REACHABLE
190 ... ${src['onu']} onu=True onu_reason=omci-flows-pushed
191 END
192 Run Keyword and Ignore Error Collect Logs
Hema526eceb2020-02-04 13:11:40 +0530193
194Disable and Delete the logical device directly
195 [Documentation] Disable and delete the logical device directly is not possible
196 ... since it is allowed only through OLT device deletion.
197 [Tags] VOL-2418 DisableDelete_LogicalDevice notready
Andy Bavier4a8450e2020-02-04 08:58:37 -0700198 [Setup] Run Keywords Announce Message START TEST DisableDelete_LogicalDevice
Andy Bavierabeba262020-02-07 16:22:16 -0700199 ... AND Start Logging DisableDelete_LogicalDevice
Andy Bavier4a8450e2020-02-04 08:58:37 -0700200 ... AND Delete Device and Verify
201 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700202 ... AND Stop Logging DisableDelete_LogicalDevice
Andy Bavier4a8450e2020-02-04 08:58:37 -0700203 ... AND Announce Message END TEST DisableDelete_LogicalDevice
Hema526eceb2020-02-04 13:11:40 +0530204 Run Keyword If ${has_dataplane} Sleep 180s
205 #create/preprovision OLT device
206 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
207 Set Suite Variable ${olt_device_id}
208 #validate olt states
209 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
210 ... ${EMPTY} ${olt_device_id}
211 #Enable the created OLT device
212 Enable Device ${olt_device_id}
213 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
214 ... ${olt_serial_number}
215 #Check whether logical devices are also created
216 ${rc} ${output}= Run and Return Rc and Output
217 ... ${VOLTCTL_CONFIG}; voltctl logicaldevice list
218 Should Be Equal As Integers ${rc} 0
219 Log ${output}
220 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
221 Should Not Be Empty ${logical_id}
222 ${rc} ${output}= Run and Return Rc and Output
223 ... ${VOLTCTL_CONFIG}; voltctl logicaldevice disable ${logical_id}
224 Should Be Equal As Integers ${rc} 0
225 Log ${output}
226 Should Contain '${output}' Unknown command
227 ${rc} ${output1}= Run and Return Rc and Output
228 ... ${VOLTCTL_CONFIG}; voltctl logicaldevice delete ${logical_id}
229 Should Be Equal As Integers ${rc} 0
230 Log ${output1}
231 Should Contain '${output1}' Unknown command
suraj goura4166222020-02-03 12:09:11 +0000232
233Check logical device creation and deletion
234 [Documentation] Deletes all devices, checks logical device, creates devices again and checks
235 ... logical device, flows, ports
236 [Tags] VOL-2416 VOL-2417 LogicalDeviceCheck notready
Andy Bavierabeba262020-02-07 16:22:16 -0700237 [Setup] Run Keywords Announce Message START TEST LogicalDeviceCheck
238 ... AND Start Logging LogicalDeviceCheck
Andy Bavier4a8450e2020-02-04 08:58:37 -0700239 [Teardown] Run Keywords Collect Logs
Andy Bavierabeba262020-02-07 16:22:16 -0700240 ... AND Stop Logging LogicalDeviceCheck
Andy Bavier4a8450e2020-02-04 08:58:37 -0700241 ... AND Announce Message END TEST LogicalDeviceCheck
suraj goura4166222020-02-03 12:09:11 +0000242 Delete Device and Verify
243 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
244 Should Be Empty ${logical_id}
245 Run Keyword If ${has_dataplane} Sleep 180s
246 ${olt_device_id}= Create Device ${olt_ip} ${OLT_PORT}
247 Set Suite Variable ${olt_device_id}
248 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device PREPROVISIONED UNKNOWN UNKNOWN
249 ... ${EMPTY} ${olt_device_id}
250 Enable Device ${olt_device_id}
251 Wait Until Keyword Succeeds ${timeout} 5s Validate OLT Device ENABLED ACTIVE REACHABLE
252 ... ${olt_serial_number}
253 ${logical_id}= Get Logical Device ID From SN ${olt_serial_number}
254 Should Not Be Empty ${logical_id}
255 ${rc} ${output}= Run and Return Rc and Output
256 ... ${VOLTCTL_CONFIG}; voltctl logicaldevice list
257 Should Be Equal As Integers ${rc} 0
258 Log ${output}
259 Should Contain ${output} ${olt_device_id}
260 Set Suite Variable ${logical_id}
261 Wait Until Keyword Succeeds ${timeout} 5s Validate Logical Device Ports ${logical_id}
262 Wait Until Keyword Succeeds ${timeout} 5s Validate Logical Device Flows ${logical_id}
263 Run Keyword and Ignore Error Collect Logs