blob: 6e45211091913d2ef9e90dbd8f6139564947ee5e [file] [log] [blame]
Kailash6f5acb62019-08-28 14:38:45 -07001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15node ("${TestNodeName}") {
16 timeout (100) {
17 try {
18 stage ("Parse deployment configuration file") {
Matteo Scandolo1294aeb2019-09-24 16:20:32 -070019 sh returnStdout: true, script: "rm -rf helm-repo-tools ${configBaseDir} voltha-system-tests kind-voltha"
Suchitra Vemurie514b8c2019-09-23 19:37:18 -070020 sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/helm-repo-tools"
21 sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
22 sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/voltha-system-tests"
Matteo Scandolo1294aeb2019-09-24 16:20:32 -070023 sh returnStdout: true, script: "git clone https://github.com/ciena/kind-voltha.git"
Kailash6f5acb62019-08-28 14:38:45 -070024 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
25 }
26 stage('Clean up') {
You Wang25e58612019-10-01 16:30:28 -070027 timeout(10) {
Kailash6f5acb62019-08-28 14:38:45 -070028 sh returnStdout: true, script: """
29 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
Matteo Scandolo1294aeb2019-09-24 16:20:32 -070030 for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
31 do
32 echo "Purging chart: \${hchart}"
33 helm delete --purge "\${hchart}"
34 done
Kailash6f5acb62019-08-28 14:38:45 -070035 """
36 timeout(5) {
37 waitUntil {
38 helm_deleted = sh returnStdout: true, script: """
39 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
40 helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
41 """
42 return helm_deleted.toInteger() == 0
43 }
44 }
45 timeout(5) {
46 waitUntil {
47 kubectl_deleted = sh returnStdout: true, script: """
48 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
49 kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
50 """
51 return kubectl_deleted.toInteger() == 0
52 }
53 }
54 }
55 }
Suchitra Vemuri1934abc2019-11-05 12:41:11 -080056 stage('Install Voltha') {
Kailash6f5acb62019-08-28 14:38:45 -070057 timeout(10) {
58 sh returnStdout: true, script: """
59 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
60 cd kind-voltha/
Suchitra Vemuri1934abc2019-11-05 12:41:11 -080061 if ( ${released} ); then
Suchitra Vemuri7159e6a2019-11-07 14:11:52 -080062 export EXTRA_HELM_FLAGS="--set defaults.image_tag=null,images.onos.tag=2.2.0"
Suchitra Vemurib9483862019-11-05 21:37:29 -080063 else
Andy Bavier7cee6f42019-11-05 16:49:47 -070064 export EXTRA_HELM_FLAGS='-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml'
Suchitra Vemuri1934abc2019-11-05 12:41:11 -080065 fi
Andy Bavier7cee6f42019-11-05 16:49:47 -070066
67 # VOL-2194 ONOS SSH and REST ports hardcoded to 30115/30120 in tests
68 ONOS_SSH_PORT=30115 ONOS_API_PORT=30120 VOLTHA_LOG_LEVEL=DEBUG WITH_SIM_ADAPTERS=n WITH_RADIUS=y WITH_TP=yes DEPLOY_K8S=no INSTALL_KUBECTL=no INSTALL_HELM=no FANCY=0 ./voltha up
69
Suchitra Vemuri1934abc2019-11-05 12:41:11 -080070 kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\t'}{.imageID}{'\\n'}" | sort | uniq -c
71 kubectl get nodes -o wide
72 kubectl get pods -n voltha -o wide
Kailash6f5acb62019-08-28 14:38:45 -070073 """
Suchitra Vemuri1934abc2019-11-05 12:41:11 -080074 }
Kailash6f5acb62019-08-28 14:38:45 -070075 }
hwchiuc77c7d22019-10-18 13:58:35 -070076 if ( params.configurePod && params.profile != "Default") {
Suchitra Vemuri72680092019-10-03 12:39:20 -070077 stage('Push Tech-Profile') {
78 timeout(1) {
79 out_push_tp = sh returnStatus: true, script: """
80 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
81 etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
hwchiuc77c7d22019-10-18 13:58:35 -070082 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
Suchitra Vemuri72680092019-10-03 12:39:20 -070083 put_result=\$(kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/xgspon/64')
84 """
85 return out_push_tp == 0
86 }
87 timeout(1) {
88 out_get_tp = sh returnStatus: true, script: """
89 etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
90 get_result=\$(kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/xgspon/64')
91 """
92 return out_get_tp == 0
93 }
hwchiuc77c7d22019-10-18 13:58:35 -070094 }
95 }
96 stage('Push Sadis-config') {
97 timeout(1) {
98 sadis_out = sh returnStatus: true, script: """
Suchitra Vemuri72680092019-10-03 12:39:20 -070099 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
100 """
101 return sadis_out == 0
You Wangb9526e62019-10-07 15:25:48 -0700102 }
hwchiuc77c7d22019-10-18 13:58:35 -0700103 }
Kailash6f5acb62019-08-28 14:38:45 -0700104
105 if ( params.reinstallOlt ) {
106 stage('Reinstall OLT software') {
107 for(int i=0; i < deployment_config.olts.size(); i++) {
108 sh returnStdout: true, script: """
109 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'
110 """
111 timeout(5) {
112 waitUntil {
113 olt_sw_present = sh returnStdout: true, script: """
114 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
115 """
116 return olt_sw_present.toInteger() == 0
117 }
118 }
119 sh returnStdout: true, script: """
120 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}"
121 """
122 timeout(5) {
123 waitUntil {
124 olt_sw_present = sh returnStdout: true, script: """
125 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
126 """
127 return olt_sw_present.toInteger() == 1
128 }
129 }
130 // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
131 if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') {
132 sh returnStdout: true, script: """
133 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc'
134 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh'
135 """
136 }
137 }
138 }
139 stage('Restart OLT processes') {
140 for(int i=0; i < deployment_config.olts.size(); i++) {
141 timeout(5) {
142 sh returnStdout: true, script: """
143 ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts
144 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist stop' || true
145 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt stop' || true
146 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/bal_core_dist.log'
147 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/openolt.log'
148 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist start &'
149 sleep 5
150 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt start &'
151 """
152 }
153 timeout(15) {
154 waitUntil {
155 onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /var/log/openolt.log | grep \"oper_state: up\" | wc -l'"
156 return onu_discovered.toInteger() > 0
157 }
158 }
159 }
160 }
161 }
Matteo Scandolo1294aeb2019-09-24 16:20:32 -0700162 if ( deployment_config.fabric_switches.size() > 0 ) {
You Wang25e58612019-10-01 16:30:28 -0700163 stage('Switch Configurations in ONOS') {
164 timeout(1) {
165 netcfg_out = sh returnStatus: true, script: """
166 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json
167 curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
168 """
169 return netcfg_out == 0
170 }
171 timeout(1) {
172 waitUntil {
173 sr_active_out = sh returnStatus: true, script: """
You Wangeb76aeb2019-12-09 22:08:23 -0800174 ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115
Suchitra Vemuric3257262019-12-05 19:06:42 -0800175 ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts
176 sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
177 sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
178 sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
179
You Wang25e58612019-10-01 16:30:28 -0700180 curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
181 """
182 return sr_active_out == 0
183 }
184 }
185 timeout(1) {
186 // FIXME support multiple OLTs
187 for(int i=0; i < deployment_config.hosts.src.size(); i++) {
188 xconnect_out = sh returnStatus: true, script: """
Suchitra Vemurif82086d2020-01-16 19:55:16 -0800189 version=\$(sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "summary" | grep version)
190 if [[ \$version == *"version=2.2"* ]]; then
191 curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${deployment_config.fabric_switches[0].oltPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
192 else
193 curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "ports": [${deployment_config.fabric_switches[0].bngPort},${deployment_config.fabric_switches[0].oltPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
194 fi
You Wang25e58612019-10-01 16:30:28 -0700195 """
196 }
197 }
Kailash6f5acb62019-08-28 14:38:45 -0700198 }
Matteo Scandolo1294aeb2019-09-24 16:20:32 -0700199 }
Kailash6f5acb62019-08-28 14:38:45 -0700200 currentBuild.result = 'SUCCESS'
201 } catch (err) {
202 currentBuild.result = 'FAILURE'
203 step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
204 throw err
205 }
206 echo "RESULT: ${currentBuild.result}"
207 }
208}