| # |
| # Copyright 2018 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| vOLT-HA DHCP Test Case module |
| """ |
| |
| import os |
| import testCaseUtils |
| import logging |
| import subprocess |
| |
| |
| class DHCP(object): |
| """ |
| This class implements voltha DHCP test case |
| """ |
| |
| CHECK_IP_FILENAME = 'voltha_check_ip.log' |
| DE_ASSIGN_IP_FILENAME = 'voltha_de-assign_ip.log' |
| ASSIGN_DHCP_IP_FILENAME = 'voltha_assign_dhcp_ip.log' |
| CHECK_ASSIGNED_IP_FILENAME = 'voltha_check_assigned_dhcp_ip.log' |
| |
| def __init__(self): |
| self.dirs = dict() |
| self.dirs['log'] = None |
| self.dirs['root'] = None |
| self.dirs['voltha'] = None |
| |
| self.__rgName = testCaseUtils.discover_rg_pod_name() |
| self.__fields = None |
| self.__deviceId = None |
| self.__portNumber = None |
| |
| def h_set_log_dirs(self, root_dir, voltha_dir, log_dir): |
| testCaseUtils.config_dirs(self, log_dir, root_dir, voltha_dir) |
| |
| def discover_authorized_users(self): |
| testCaseUtils.send_command_to_onos_cli(testCaseUtils.get_dir(self, 'log'), |
| 'voltha_onos_users.log', 'aaa-users') |
| |
| def retrieve_authorized_users_device_id_and_port_number(self): |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, 'AUTHORIZED', 'voltha_onos_users.log') |
| assert statusLines, 'No Users Authorized' |
| self.__fields = testCaseUtils.parse_fields(statusLines, ',') |
| deviceField = self.__fields[2].strip() |
| deviceStr, equal, deviceId = deviceField.partition('=') |
| self.__deviceId = deviceId |
| portField = self.__fields[4].strip() |
| portNumStr, equal, portNum = portField.partition('=') |
| self.__portNumber = portNum |
| |
| def add_subscriber_access(self): |
| testCaseUtils.send_command_to_onos_cli(testCaseUtils.get_dir(self, 'log'), |
| 'voltha_add_subscriber_access.log', 'volt-add-subscriber-access %s %s' |
| % (self.__deviceId, self.__portNumber)) |
| |
| def should_now_have_two_dhcp_flows(self): |
| testCaseUtils.send_command_to_onos_cli(testCaseUtils.get_dir(self, 'log'), |
| 'voltha_onos_flows.log', 'flows -s') |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, 'IP_PROTO:17', 'voltha_onos_flows.log') |
| assert statusLines, 'No DHCP Detection flows' |
| lines = statusLines.splitlines() |
| assert len(lines) == 2, 'Expected 2 DHCP Detection Flows but result was %s' % len(lines) |
| for line in lines: |
| self.__fields = testCaseUtils.parse_fields(line, ',') |
| inPortStr = self.__fields[5].strip() |
| selector, delimiter, inPort = inPortStr.partition('=[') |
| assert (inPort == 'IN_PORT:2' or inPort == 'IN_PORT:128'), 'DHCP detection flows not associated with expected ports' |
| |
| def add_dhcp_server_configuration_data_in_onos(self): |
| logging.info('Adding DHCP Configuration Data to Onos NetCfg') |
| logging.debug('curl --user karaf:karaf -X POST -H "Content-Type: application/json" ' |
| 'http://localhost:30120/onos/v1/network/configuration/apps/ -d @%s/tests/atests/build/dhcp_json' |
| % testCaseUtils.get_dir(self, 'voltha')) |
| os.system('curl --user karaf:karaf -X POST -H "Content-Type: application/json" ' |
| 'http://localhost:30120/onos/v1/network/configuration/apps/ -d @%s/tests/atests/build/dhcp_json' |
| % testCaseUtils.get_dir(self, 'voltha')) |
| |
| def activate_dhcp_server_in_onos(self): |
| logging.info('Activating DHCP server on Onos') |
| testCaseUtils.send_command_to_onos_cli(testCaseUtils.get_dir(self, 'log'), |
| 'voltha_dhcp_server_activate.log', 'app activate dhcp') |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, 'Activated', 'voltha_dhcp_server_activate.log') |
| assert statusLines, 'DHCP server failed to be Activated' |
| |
| def deactivate_dhcp_server_in_onos(self): |
| logging.info('Deactivating DHCP server on Onos') |
| testCaseUtils.send_command_to_onos_cli(testCaseUtils.get_dir(self, 'log'), |
| 'voltha_dhcp_server_deactivate.log', 'app deactivate dhcp') |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, 'Deactivated', 'voltha_dhcp_server_deactivate.log') |
| assert statusLines, 'DHCP server failed to be Deactivated' |
| |
| def query_for_default_ip_on_rg(self): |
| logging.info('De-assigning default IP on RG') |
| process_output = open('%s/%s' % (testCaseUtils.get_dir(self, 'log'), self.CHECK_IP_FILENAME), 'w') |
| ifconfigCheck1 = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-n', 'voltha', self.__rgName, '--', 'bash', '-c', |
| 'ifconfig'], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| ifconfigCheck2 = subprocess.Popen(['grep', '-e', 'eth0', '-A1'], stdin=ifconfigCheck1.stdout, |
| stdout=process_output, |
| stderr=process_output) |
| |
| ifconfigCheck1.wait() |
| ifconfigCheck1.stdout.close() |
| ifconfigCheck2.wait() |
| |
| process_output.close() |
| |
| testCaseUtils.print_log_file(self, self.CHECK_IP_FILENAME) |
| |
| def de_assign_default_ip_on_rg(self): |
| |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, 'inet', self.CHECK_IP_FILENAME) |
| if statusLines: |
| process_output = open('%s/%s' % (testCaseUtils.get_dir(self, 'log'), self.DE_ASSIGN_IP_FILENAME), 'w') |
| os.system('/usr/bin/kubectl exec -n voltha %s -- bash -c "ifconfig eth0 0.0.0.0"' % self.__rgName) |
| ifconfigDeassign1 = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-n', 'voltha', self.__rgName, '--', 'bash', '-c', |
| 'ifconfig'], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| |
| ifconfigDeassign2 = subprocess.Popen(['grep', '-e', 'eth0', '-A1'], stdin=ifconfigDeassign1.stdout, |
| stdout=process_output, |
| stderr=process_output) |
| ifconfigDeassign1.wait() |
| ifconfigDeassign1.stdout.close() |
| ifconfigDeassign2.wait() |
| |
| process_output.close() |
| |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, 'inet', self.DE_ASSIGN_IP_FILENAME) |
| assert not statusLines, 'IP addr not de-assigned' |
| |
| else: |
| logging.info('No default IP addr assigned to eth0') |
| |
| def assign_dhcp_ip_addr_to_rg(self): |
| logging.info('Assigning IP addr on RG using DHCP') |
| process_output = open('%s/%s' % (testCaseUtils.get_dir(self, 'log'), self.ASSIGN_DHCP_IP_FILENAME), 'w') |
| dhcpAssignIp1 = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-it', '-n', 'voltha', self.__rgName, '--', |
| 'dhclient', '-v', 'eth0'], |
| stdout=process_output, |
| stderr=process_output) |
| |
| dhcpAssignIp1.wait() |
| process_output.close() |
| |
| testCaseUtils.print_log_file(self, self.ASSIGN_DHCP_IP_FILENAME) |
| |
| procPidDhclient1 = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-n', 'voltha', self.__rgName, '--', 'ps', '-ef'], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| procPidDhclient2 = subprocess.Popen(['grep', '-e', 'dhclient'], stdin=procPidDhclient1.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| procPidDhclient3 = subprocess.Popen(['awk', "{print $2}"], stdin=procPidDhclient2.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| |
| procPidDhclient1.stdout.close() |
| procPidDhclient2.stdout.close() |
| |
| out, err = procPidDhclient3.communicate() |
| dhclientPid = out.strip() |
| if dhclientPid: |
| procKillDhclient = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-n', 'voltha', self.__rgName, '--', 'kill', dhclientPid], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| |
| out, err = procKillDhclient.communicate() |
| assert not err, 'Killing dhclient returned %s' % err |
| |
| def should_have_dhcp_assigned_ip(self): |
| process_output = open('%s/%s' % (testCaseUtils.get_dir(self, 'log'), self.CHECK_ASSIGNED_IP_FILENAME), 'w') |
| ifConfigCheck1 = subprocess.Popen(['/usr/bin/kubectl', 'exec', '-n', 'voltha', self.__rgName, '--', 'bash', '-c', |
| 'ifconfig'], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| |
| ifConfigCheck2 = subprocess.Popen(['grep', '-e', 'eth0', '-A1'], stdin=ifConfigCheck1.stdout, |
| stdout=process_output, |
| stderr=process_output) |
| ifConfigCheck1.wait() |
| ifConfigCheck1.stdout.close() |
| ifConfigCheck2.wait() |
| |
| process_output.close() |
| |
| testCaseUtils.print_log_file(self, self.CHECK_ASSIGNED_IP_FILENAME) |
| |
| statusLines = testCaseUtils.get_fields_from_grep_command(self, 'inet', self.CHECK_ASSIGNED_IP_FILENAME) |
| assert statusLines, 'DHCP IP addr not assigned' |
| |
| |
| def set_firewall_rules(): |
| logging.info('Setting Firewall rules for DHCP test') |
| os.system('sudo iptables -P FORWARD ACCEPT') |
| |
| |
| def run_test(root_dir, voltha_dir, log_dir): |
| |
| set_firewall_rules() |
| dhcp = DHCP() |
| dhcp.h_set_log_dirs(root_dir, voltha_dir, log_dir) |
| dhcp.discover_authorized_users() |
| dhcp.retrieve_authorized_users_device_id_and_port_number() |
| dhcp.add_subscriber_access() |
| dhcp.should_now_have_two_dhcp_flows() |
| dhcp.deactivate_dhcp_server_in_onos() |
| dhcp.add_dhcp_server_configuration_data_in_onos() |
| dhcp.activate_dhcp_server_in_onos() |
| dhcp.query_for_default_ip_on_rg() |
| dhcp.de_assign_default_ip_on_rg() |
| dhcp.assign_dhcp_ip_addr_to_rg() |
| dhcp.should_have_dhcp_assigned_ip() |