| # |
| # Copyright 2017 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| Tibit OLT device adapter |
| """ |
| import json |
| import time |
| from uuid import uuid4 |
| import struct |
| import re |
| |
| import arrow |
| import structlog |
| from scapy.fields import StrField, PacketField, X3BytesField |
| from scapy.layers.l2 import Ether, Dot1Q |
| from scapy.packet import Packet, bind_layers |
| |
| from scapy.fields import ByteEnumField, XShortField, XByteField, MACField, \ |
| ByteField, BitEnumField, BitField, ShortField |
| from scapy.fields import XLongField, StrFixedLenField, XIntField, \ |
| FieldLenField, StrLenField, IntField |
| |
| |
| |
| from twisted.internet import reactor |
| from twisted.internet.defer import DeferredQueue, inlineCallbacks |
| from twisted.internet.task import LoopingCall |
| from zope.interface import implementer |
| |
| from common.frameio.frameio import BpfProgramFilter, hexify |
| from voltha.adapters.interface import IAdapterInterface |
| |
| from voltha.extensions.eoam.EOAM import EOAMPayload, EOAMEvent, EOAM_VendSpecificMsg |
| from voltha.extensions.eoam.EOAM import EOAM_OmciMsg, EOAM_TibitMsg, EOAM_DpoeMsg |
| from voltha.extensions.eoam.EOAM import OAM_ETHERTYPE |
| from voltha.extensions.eoam.EOAM import CableLabs_OUI, Tibit_OUI, IEEE_OUI |
| from voltha.extensions.eoam.EOAM import RxedOamMsgTypeEnum, Dpoe_Opcodes, get_oam_msg_type, \ |
| handle_get_value, get_value_from_msg, check_set_resp, check_resp |
| |
| from voltha.extensions.eoam.EOAM_TLV import DOLTObject, \ |
| NetworkToNetworkPortObject, OLTUnicastLogicalLink, OLTEPONUnicastLogicalLink, \ |
| PortIngressRuleClauseMatchLength01, AddStaticMacAddress, \ |
| PortIngressRuleClauseMatchLength02, PortIngressRuleResultForward, \ |
| PortIngressRuleResultSet, PortIngressRuleResultInsert, \ |
| PortIngressRuleResultCopy, PortIngressRuleResultReplace, \ |
| PortIngressRuleResultDelete, PortIngressRuleResultOLTQueue, \ |
| PortIngressRuleResultOLTBroadcastQueue, PortIngressRuleResultOLTEPONQueue, \ |
| PortIngressRuleTerminator, AddPortIngressRule, \ |
| ItuOUI, PonPortObject |
| from voltha.extensions.eoam.EOAM_TLV import PortIngressRuleHeader |
| from voltha.extensions.eoam.EOAM_TLV import ClauseSubtypeEnum |
| from voltha.extensions.eoam.EOAM_TLV import RuleOperatorEnum |
| from voltha.extensions.eoam.EOAM_TLV import DPoEVariableResponseCodes, DPoEOpcodeEnum |
| from voltha.extensions.eoam.EOAM_TLV import VendorName, OltMode, HardwareVersion, ManufacturerInfo |
| from voltha.extensions.eoam.EOAM_TLV import TibitLinkMacTable, OltPonAdminStateSet, TibitDeviceReset |
| from voltha.extensions.eoam.EOAM_TLV import SlowProtocolsSubtypeEnum |
| from voltha.extensions.eoam.EOAM_TLV import EndOfPDU |
| |
| from voltha.extensions.eoam.EOAM_TLV import RxFramesGreen, \ |
| TxFramesGreen, RxFrame_64, RxFrame_65_127, \ |
| RxFrame_128_255, RxFrame_256_511, RxFrame_512_1023, \ |
| RxFrame_1024_1518, RxFrame_1519Plus, TxFrame_64, \ |
| TxFrame_65_127, TxFrame_128_255, TxFrame_256_511, \ |
| TxFrame_512_1023, TxFrame_1024_1518, TxFrame_1519Plus |
| |
| from voltha.extensions.eoam.EOAM_TLV import RxFramesGreen, TxFramesGreen, \ |
| RxFrame_64, RxFrame_65_127, RxFrame_128_255, RxFrame_256_511, \ |
| RxFrame_512_1023,RxFrame_1024_1518, RxFrame_1519Plus, \ |
| TxFrame_64, TxFrame_65_127, TxFrame_128_255, \ |
| TxFrame_256_511, TxFrame_512_1023, TxFrame_1024_1518, \ |
| TxFrame_1519Plus |
| |
| |
| |
| from voltha.core.flow_decomposer import * |
| from voltha.core.logical_device_agent import mac_str_to_tuple |
| from voltha.protos.adapter_pb2 import Adapter, AdapterConfig |
| from voltha.protos.common_pb2 import LogLevel, ConnectStatus |
| from voltha.protos.common_pb2 import OperStatus, AdminState |
| from voltha.protos.device_pb2 import Device, Port, Image |
| from voltha.protos.device_pb2 import DeviceType, DeviceTypes |
| from voltha.protos.events_pb2 import KpiEvent, MetricValuePairs |
| from voltha.protos.events_pb2 import KpiEventType |
| from voltha.protos.health_pb2 import HealthStatus |
| from voltha.protos.logical_device_pb2 import LogicalDevice, LogicalPort |
| from voltha.protos.openflow_13_pb2 import ofp_desc, ofp_port, OFPPF_10GB_FD, \ |
| OFPPF_FIBER, OFPPS_LIVE, ofp_switch_features, OFPC_PORT_STATS, \ |
| OFPC_GROUP_STATS, OFPC_TABLE_STATS, OFPC_FLOW_STATS |
| from voltha.registry import registry |
| log = structlog.get_logger() |
| |
| TIBIT_ONU_LINK_INDEX = 2 |
| |
| # Match on the MGMT VLAN, Priority 7 |
| TIBIT_MGMT_VLAN = 4090 |
| TIBIT_MGMT_PRIORITY = 7 |
| frame_match_case1 = 'ether[14:2] = 0x{:01x}{:03x}'.format( |
| TIBIT_MGMT_PRIORITY << 1, TIBIT_MGMT_VLAN) |
| |
| TIBIT_PACKET_IN_VLAN = 4000 |
| frame_match_case2 = '(ether[14:2] & 0xfff) = 0x{:03x}'.format( |
| TIBIT_PACKET_IN_VLAN) |
| |
| TIBIT_PACKET_OUT_VLAN = 4000 |
| |
| TIBIT_MSG_WAIT_TIME = 3 |
| |
| is_tibit_frame = BpfProgramFilter('{} or {}'.format( |
| frame_match_case1, frame_match_case2)) |
| |
| |
| # TODO: This information should be conveyed to the adapter |
| # from a higher level. |
| MULTICAST_VLAN = 140 |
| |
| TIBIT_COMMUNICATIONS_OUI=u'000CE2' |
| SUMITOMO_ELECTRIC_INDUSTRIES_OUI=u'0025DC' |
| |
| ADTRAN_SHORTENED_VSSN=u'4144' # 'AD' |
| TIBIT_SHORTENED_VSSN=u'5442' # 'TB' |
| |
| @implementer(IAdapterInterface) |
| class TibitOltAdapter(object): |
| |
| name = 'tibit_olt' |
| |
| supported_device_types = [ |
| DeviceType( |
| id='tibit_olt', |
| adapter=name, |
| accepts_bulk_flow_update=True |
| ) |
| ] |
| |
| def __init__(self, adapter_agent, config): |
| self.adapter_agent = adapter_agent |
| self.config = config |
| self.descriptor = Adapter( |
| id=self.name, |
| vendor='Tibit Communications Inc.', |
| version='0.1', |
| config=AdapterConfig(log_level=LogLevel.INFO) |
| ) |
| self.interface = registry('main').get_args().interface |
| self.io_port = None |
| self.incoming_queues = {} # OLT mac_address -> DeferredQueue() |
| self.device_ids = {} # OLT mac_address -> device_id |
| self.vlan_to_device_ids = {} # c-vid -> (device_id, logical_device_id, mac_address) |
| self.mode = "GPON" |
| |
| def start(self): |
| log.debug('starting', interface=self.interface) |
| log.info('started', interface=self.interface) |
| |
| def stop(self): |
| log.debug('stopping') |
| if self.io_port is not None: |
| registry('frameio').close_port(self.io_port) |
| log.info('stopped') |
| |
| def adapter_descriptor(self): |
| return self.descriptor |
| |
| def update_pm_config(self, device, pm_configs): |
| raise NotImplementedError() |
| |
| def device_types(self): |
| return DeviceTypes(items=self.supported_device_types) |
| |
| def health(self): |
| return HealthStatus(state=HealthStatus.HealthState.HEALTHY) |
| |
| def change_master_state(self, master): |
| raise NotImplementedError() |
| |
| def adopt_device(self, device): |
| log.info('adopt-device', device=device) |
| self._activate_io_port() |
| reactor.callLater(0, self._launch_device_activation, device) |
| |
| def reconcile_device(self, device): |
| raise NotImplementedError() |
| |
| def _activate_io_port(self): |
| if self.io_port is None: |
| self.io_port = registry('frameio').open_port( |
| self.interface, self._rcv_io, is_tibit_frame) |
| |
| @inlineCallbacks |
| def _launch_device_activation(self, device): |
| try: |
| log.debug('launch_dev_activation') |
| # prepare receive queue |
| self.incoming_queues[device.mac_address] = DeferredQueue(size=100) |
| |
| # add mac_address to device_ids table |
| olt_mac = device.mac_address |
| self.device_ids[olt_mac] = device.id |
| |
| # send out ping to OLT device |
| ping_frame = self._make_ping_frame(mac_address=olt_mac) |
| self.io_port.send(ping_frame) |
| |
| # Loop until we have a Get Response or timeout |
| ack = False |
| start_time = time.time() |
| while not ack: |
| frame = yield self.incoming_queues[olt_mac].get() |
| #TODO - Need to add proper timeout functionality |
| #if (time.time() - start_time) > TIBIT_MSG_WAIT_TIME or (frame is None): |
| # break # don't wait forever |
| |
| respType = get_oam_msg_type(log, frame) |
| |
| if (respType == RxedOamMsgTypeEnum["DPoE Get Response"]): |
| ack = True |
| else: |
| # Handle unexpected events/OMCI messages |
| check_resp(log, frame) |
| |
| except Exception as e: |
| log.exception('launch device failed', e=e) |
| |
| if ack: |
| # Process the Get Request message |
| self._process_ping_frame_response(device, frame) |
| |
| # then shortly after we create some ports for the device |
| log.info('create-port') |
| nni_port = Port( |
| port_no=2, |
| label='NNI facing Ethernet port', |
| type=Port.ETHERNET_NNI, |
| admin_state=AdminState.ENABLED, |
| oper_status=OperStatus.ACTIVE |
| ) |
| self.adapter_agent.add_port(device.id, nni_port) |
| self.adapter_agent.add_port(device.id, Port( |
| port_no=1, |
| label='PON port', |
| type=Port.PON_OLT, |
| admin_state=AdminState.ENABLED, |
| oper_status=OperStatus.ACTIVE |
| )) |
| |
| log.info('create-logical-device') |
| # then shortly after we create the logical device with one port |
| # that will correspond to the NNI port |
| |
| # There could be multiple software version on the device, |
| # active, standby etc. Choose the active or running software |
| # below. See simulated_olt for example implementation |
| version = device.images.image[0].version |
| |
| ld = LogicalDevice( |
| desc=ofp_desc( |
| mfr_desc=device.vendor, |
| hw_desc=device.hardware_version, |
| sw_desc=version, |
| serial_num=uuid4().hex, |
| dp_desc='n/a' |
| ), |
| switch_features=ofp_switch_features( |
| n_buffers=256, # TODO fake for now |
| n_tables=2, # TODO ditto |
| capabilities=( # TODO and ditto |
| OFPC_FLOW_STATS |
| | OFPC_TABLE_STATS |
| | OFPC_PORT_STATS |
| | OFPC_GROUP_STATS |
| ) |
| ), |
| root_device_id=device.id |
| ) |
| ld_initialized = self.adapter_agent.create_logical_device(ld) |
| cap = OFPPF_10GB_FD | OFPPF_FIBER |
| self.adapter_agent.add_logical_port(ld_initialized.id, LogicalPort( |
| id='nni', |
| ofp_port=ofp_port( |
| port_no=0, |
| hw_addr=mac_str_to_tuple(device.mac_address), |
| name='nni', |
| config=0, |
| state=OFPPS_LIVE, |
| curr=cap, |
| advertised=cap, |
| peer=cap, |
| curr_speed=OFPPF_10GB_FD, |
| max_speed=OFPPF_10GB_FD |
| ), |
| device_id=device.id, |
| device_port_no=nni_port.port_no, |
| root_port=True |
| )) |
| |
| # and finally update to active |
| device = self.adapter_agent.get_device(device.id) |
| device.parent_id = ld_initialized.id |
| device.oper_status = OperStatus.ACTIVE |
| self.adapter_agent.update_device(device) |
| |
| # Just transitioned to ACTIVE, wait a tenth of second |
| # before checking for ONUs |
| reactor.callLater(0.1, self._detect_onus, device) |
| |
| # END if ack |
| |
| @inlineCallbacks |
| def _detect_onus(self, device): |
| # send out get 'links' to the OLT device |
| olt_mac = device.mac_address |
| links_frame = self._make_links_frame(mac_address=olt_mac) |
| self.io_port.send(links_frame) |
| |
| |
| # Loop until we have a Get Response or timeout |
| ack = False |
| start_time = time.time() |
| while not ack: |
| |
| frame = yield self.incoming_queues[olt_mac].get() |
| |
| #TODO - Need to add proper timeout functionality |
| #if (time.time() - start_time) > TIBIT_MSG_WAIT_TIME or (frame is None): |
| # break # don't wait forever |
| |
| respType = get_oam_msg_type(log, frame) |
| |
| if (respType == RxedOamMsgTypeEnum["DPoE Get Response"]): |
| ack = True |
| else: |
| # Handle unexpected events/OMCI messages |
| check_resp(log, frame) |
| |
| if ack: |
| #Process the Get Response |
| mac_table = [0xB7, 0x0103] |
| links = [] |
| branch_leaf_pairs = [mac_table] |
| overall_rc = False |
| |
| for pair in branch_leaf_pairs: |
| temp_pair = pair |
| (rc, value) = (get_value_from_msg(log, frame, pair[0], pair[1])) |
| temp_pair.append(rc) |
| temp_pair.append(value) |
| if rc: |
| overall_rc = True |
| else: |
| log.info('Failed to get valid response for Branch 0x{:X} Leaf 0x{:0>4X} '.format(temp_pair[0], temp_pair[1])) |
| |
| if overall_rc and mac_table[rc]: |
| value = mac_table.pop() |
| macLen = 0 |
| while (macLen < len(value)): |
| macAddr = struct.unpack_from(">6B", value, macLen) |
| linkAddr = "".join([hex(i).lstrip("0x").zfill(2) for i in macAddr]) |
| |
| if linkAddr is None: |
| log.info('MAC Addr is NONE') |
| elif linkAddr[:6].upper() == SUMITOMO_ELECTRIC_INDUSTRIES_OUI: |
| onu_mac_string = linkAddr |
| log.info('SUMITOMO mac address %s' % str(linkAddr)) |
| child_device_name = 'dpoe_onu' |
| elif linkAddr[:4].upper() == ADTRAN_SHORTENED_VSSN: |
| onu_mac_string = linkAddr |
| log.info('ADTRAN mac address %s' % str(linkAddr)) |
| child_device_name = 'adtran_onu' |
| else: |
| onu_mac_string = '000c' + linkAddr[4:] |
| log.info('TIBIT mac address %s' % onu_mac_string) |
| child_device_name = 'tibit_onu' |
| |
| if linkAddr is not None: |
| # Convert from string to colon separated form |
| onu_mac = ':'.join(s.encode('hex') for s in onu_mac_string.decode('hex')) |
| log.info('activate-olt-for-onu-%s' % onu_mac) |
| mac_octet_4 = int(linkAddr[-4:-2], 16) |
| vlan_id = self._olt_side_onu_activation(mac_octet_4) |
| |
| macLen += 6 |
| |
| ## Automatically setup default downstream control frames flow (in this case VLAN 4000) |
| ## on the OLT for the new ONU/ONT device |
| Clause = {v: k for k, v in ClauseSubtypeEnum.iteritems()} |
| Operator = {v: k for k, v in RuleOperatorEnum.iteritems()} |
| |
| if self.mode.upper()[0] == "G": # GPON |
| if child_device_name is 'tibit_onu': |
| vssn = "TBIT" |
| elif child_device_name is 'adtran_onu': |
| vssn = "ADTN" |
| link = int(onu_mac_string[4:12], 16) |
| resultOltQueue = "PortIngressRuleResultOLTQueue(unicastvssn=vssn, unicastlink=link)" |
| else: # EPON |
| vssn = int(onu_mac_string[0:8].rjust(8,"0"), 16) |
| link = int((onu_mac_string[8:12]).ljust(8,"0"), 16) |
| resultOltQueue = "PortIngressRuleResultOLTEPONQueue(unicastvssn=vssn, unicastlink=link)" |
| |
| packet_out_rule = ( |
| Ether(dst=device.mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode=Dpoe_Opcodes["Set Request"], |
| body=NetworkToNetworkPortObject()/ |
| PortIngressRuleHeader(precedence=13)/ |
| PortIngressRuleClauseMatchLength02(fieldcode=Clause['C-VLAN Tag'], fieldinstance=0, |
| operator=Operator['=='], |
| match=TIBIT_PACKET_OUT_VLAN)/ |
| PortIngressRuleClauseMatchLength02(fieldcode=Clause['C-VLAN Tag'], fieldinstance=1, |
| operator=Operator['=='], match=vlan_id)/ |
| eval(resultOltQueue)/ |
| PortIngressRuleResultForward()/ |
| PortIngressRuleResultDelete(fieldcode=Clause['C-VLAN Tag'])/ |
| PortIngressRuleTerminator()/ |
| AddPortIngressRule())/ |
| EndOfPDU() |
| ) |
| |
| action = "Set DS Rule for ONU to strip C Tag" |
| log.info('OLT-send to {} for OLT: {}'.format(action, olt_mac)) |
| self.io_port.send(str(packet_out_rule)) |
| |
| # Get and process the Set Response |
| rc = [] |
| yield self._handle_set_resp(olt_mac, action, rc) |
| |
| if rc[0] is True: |
| # also record the vlan_id -> (device_id, logical_device_id, linkid) for |
| # later use. The linkid is the macid returned. |
| |
| self.vlan_to_device_ids[vlan_id] = (device.id, device.parent_id, linkAddr) |
| |
| self.adapter_agent.child_device_detected( |
| parent_device_id=device.id, |
| parent_port_no=1, |
| child_device_type=child_device_name, |
| mac_address = onu_mac, |
| proxy_address=Device.ProxyAddress( |
| device_id=device.id, |
| channel_id=vlan_id |
| ), |
| vlan=vlan_id |
| ) |
| |
| |
| # END linkAddr is not none |
| else: |
| log.info('No links were found in the MAC Table') |
| # END if mac_table[rc] |
| #END if ack |
| |
| ### KPI Metrics - Work in progress feature - Disabling for now |
| ### Give the ONUs a chance to arrive before starting metric collection |
| |
| # TODO - Disable Stats Reporting for the moment |
| # reactor.callLater(5.0, self.start_kpi_collection, device.id) |
| |
| |
| def _olt_side_onu_activation(self, serial): |
| """ |
| This is where if this was a real OLT, the OLT-side activation for |
| the new ONU should be performed. By the time we return, the OLT shall |
| be able to provide tunneled (proxy) communication to the given ONU, |
| using the returned information. |
| """ |
| vlan_id = serial + 200 |
| return vlan_id |
| |
| def _rcv_io(self, port, frame): |
| |
| log.info('frame-received', frame=hexify(frame)) |
| |
| # make into frame to extract source mac |
| response = Ether(frame) |
| |
| if response.haslayer(Dot1Q): |
| |
| # All OAM responses from the OLT should have a TIBIT_MGMT_VLAN. |
| # Responses from the ONUs should have a TIBIT_MGMT_VLAN followed by a ONU CTAG |
| # All packet-in frames will have the TIBIT_PACKET_IN_VLAN. |
| if response.getlayer(Dot1Q).type == 0x8100: |
| |
| if response.getlayer(Dot1Q).vlan == TIBIT_PACKET_IN_VLAN: |
| |
| inner_tag_and_rest = response.payload.payload |
| |
| if isinstance(inner_tag_and_rest, Dot1Q): |
| |
| cvid = inner_tag_and_rest.vlan |
| |
| frame = Ether(src=response.src, |
| dst=response.dst, |
| type=inner_tag_and_rest.type) /\ |
| inner_tag_and_rest.payload |
| |
| _, logical_device_id, _ = self.vlan_to_device_ids.get(cvid) |
| if logical_device_id is None: |
| log.error('invalid-cvid', cvid=cvid) |
| else: |
| self.adapter_agent.send_packet_in( |
| logical_device_id=logical_device_id, |
| logical_port_no=cvid, # C-VID encodes port no |
| packet=str(frame)) |
| |
| else: |
| log.error('packet-in-single-tagged', |
| frame=hexify(response)) |
| |
| else: |
| ## Mgmt responses received from the ONU |
| ## Since the type of the first layer is 0x8100, |
| ## then the frame must have an inner tag layer |
| olt_mac = response.src |
| device_id = self.device_ids[olt_mac] |
| channel_id = response[Dot1Q:2].vlan |
| log.info('received_channel_id', channel_id=channel_id, |
| device_id=device_id) |
| |
| proxy_address=Device.ProxyAddress( |
| device_id=device_id, |
| channel_id=channel_id |
| ) |
| # pop dot1q header(s) |
| msg = response.payload.payload |
| self.adapter_agent.receive_proxied_message(proxy_address, msg) |
| |
| else: |
| ## Mgmt responses received from the OLT |
| ## enqueue incoming parsed frame to right device |
| log.info('received-dot1q-not-8100') |
| self.incoming_queues[response.src].put(response) |
| |
| def _make_ping_frame(self, mac_address): |
| frame = ( |
| Ether(dst=mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode=Dpoe_Opcodes["Get Request"],body=VendorName() / |
| OltMode() / |
| HardwareVersion() / |
| ManufacturerInfo() |
| ) / |
| EndOfPDU() |
| ) |
| |
| return str(frame) |
| |
| def _process_ping_frame_response(self, device, frame): |
| |
| vendor = [0xD7, 0x0011] |
| oltMode = [0xB7, 0x0101] |
| hw_version = [0xD7, 0x0013] |
| manufacturer = [0xD7, 0x0006] |
| branch_leaf_pairs = [vendor, oltMode, hw_version, manufacturer] |
| |
| for pair in branch_leaf_pairs: |
| temp_pair = pair |
| (rc, value) = (get_value_from_msg(log, frame, pair[0], pair[1])) |
| temp_pair.append(rc) |
| temp_pair.append(value) |
| if rc: |
| overall_rc = True |
| else: |
| log.info('Failed to get valid response for Branch 0x{:X} Leaf 0x{:0>4X} '.format(temp_pair[0], temp_pair[1])) |
| ack = True |
| |
| if vendor[rc]: |
| device.vendor = vendor.pop() |
| if device.vendor.endswith(''): |
| device.vendor = device.vendor[:-1] |
| else: |
| device.vendor = "UNKNOWN" |
| |
| # mode: 3 = EPON OLT, 7 = GPON OLT |
| # mode: 2 = EPON ONU, 6 = GPON ONU |
| if oltMode[rc]: |
| value = oltMode.pop() |
| mode = "UNKNOWN" |
| self.mode = "UNKNOWN" |
| |
| if value == 7: |
| mode = "10G GPON OLT" |
| self.mode = "GPON" |
| if value == 3: |
| mode = "10G EPON OLT" |
| self.mode = "EPON" |
| if value == 1: |
| mode = "10G Point to Point" |
| self.mode = "Unsupported" |
| |
| device.model = mode |
| |
| else: |
| device.model = "UNKNOWN" |
| self.mode = "UNKNOWN" |
| |
| log.info("OLT Mode is {}".format(self.mode)) |
| |
| if hw_version[rc]: |
| device.hardware_version = hw_version.pop() |
| device.hardware_version = device.hardware_version.replace("FA","") |
| if device.hardware_version.endswith(''): |
| device.hardware_version = device.hardware_version[:-1] |
| else: |
| device.hardware_version = "UNKNOWN" |
| |
| if manufacturer[rc]: |
| manu_value = manufacturer.pop() |
| device.firmware_version = re.search('\Firmware: (.+?) ', manu_value).group(1) |
| # There could be multiple software versions on the device (one active, other |
| # standby etc.). Look for simulated_olt for example implementation. |
| image_1 = Image(version = \ |
| re.search('\Build: (.+?) ', manu_value).group(1)) |
| device.images.image.extend([ image_1 ]) |
| device.serial_number = re.search('\Serial #: (.+?) ', manu_value).group(1) |
| else: |
| device.firmware_version = "UNKNOWN" |
| image_1 = Image(version="UNKNOWN") |
| device.images.image.extend([ image_1 ]) |
| device.serial_number = "UNKNOWN" |
| device.root = True |
| device.connect_status = ConnectStatus.REACHABLE |
| |
| def _make_links_frame(self, mac_address): |
| frame = ( |
| Ether(dst=mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode=Dpoe_Opcodes["Get Request"],body=TibitLinkMacTable() |
| )/ |
| EndOfPDU() |
| ) |
| return str(frame) |
| |
| def _make_link_stats_frame(self, olt_mac_address, onu_mac_address): |
| |
| if self.mode.upper()[0] == "G": # GPON |
| vssn = "TBIT" |
| link = int(onu_mac_address[4:12], 16) |
| logical_link = "OLTUnicastLogicalLink(unicastvssn=vssn, unicastlink=link)" |
| else: # EPON |
| vssn = int(onu_mac_address[0:8].rjust(8,"0"), 16) |
| link = int((onu_mac_address[8:12]).ljust(8,"0"), 16) |
| logical_link = "OLTEPONUnicastLogicalLink(unicastvssn=vssn, unicastlink=link)" |
| |
| frame = ( |
| Ether(dst=olt_mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode=Dpoe_Opcodes["Get Request"], |
| body=eval(logical_link)/ |
| #RxFramesGreen()/ |
| #TxFramesGreen()/ |
| RxFrame_64()/ |
| RxFrame_65_127()/ |
| RxFrame_128_255()/ |
| RxFrame_256_511()/ |
| RxFrame_512_1023()/ |
| RxFrame_1024_1518()/ |
| RxFrame_1519Plus()/ |
| TxFrame_64()/ |
| TxFrame_65_127()/ |
| TxFrame_128_255()/ |
| TxFrame_256_511()/ |
| TxFrame_512_1023()/ |
| TxFrame_1024_1518()/ |
| TxFrame_1519Plus() |
| )/ |
| EndOfPDU() |
| ) |
| |
| return str(frame) |
| |
| def _make_nni_stats_frame(self, mac_address): |
| frame = ( |
| Ether(dst=mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode=Dpoe_Opcodes["Get Request"], body=NetworkToNetworkPortObject()/ |
| #RxFramesGreen()/ |
| #TxFramesGreen()/ |
| RxFrame_64()/ |
| RxFrame_65_127()/ |
| RxFrame_128_255()/ |
| RxFrame_256_511()/ |
| RxFrame_512_1023()/ |
| RxFrame_1024_1518()/ |
| RxFrame_1519Plus()/ |
| TxFrame_64()/ |
| TxFrame_65_127()/ |
| TxFrame_128_255()/ |
| TxFrame_256_511()/ |
| TxFrame_512_1023()/ |
| TxFrame_1024_1518()/ |
| TxFrame_1519Plus() |
| )/ |
| EndOfPDU() |
| ) |
| return str(frame) |
| |
| def abandon_device(self, device): |
| raise NotImplementedError(0 |
| ) |
| @inlineCallbacks |
| def disable_device(self, device): |
| log.info('Disabling OLT: {}'.format(device.mac_address)) |
| yield self.change_device_state(device, 0) |
| |
| # Disable all child devices |
| self.adapter_agent.update_child_devices_state(device.id, |
| admin_state=AdminState.DISABLED) |
| |
| @inlineCallbacks |
| def reenable_device(self, device): |
| log.info('Re-enabling OLT: {}'.format(device.mac_address)) |
| yield self.change_device_state(device, 1) |
| |
| # Reenable all child devices |
| self.adapter_agent.update_child_devices_state(device.id, |
| admin_state=AdminState.ENABLED) |
| |
| |
| @inlineCallbacks |
| def reboot_device(self, device): |
| log.info('Rebooting OLT: {}'.format(device.mac_address)) |
| |
| # Update the operational status to ACTIVATING and connect status to |
| # UNREACHABLE |
| previous_oper_status = device.oper_status |
| previous_conn_status = device.connect_status |
| device.oper_status = OperStatus.ACTIVATING |
| device.connect_status = ConnectStatus.UNREACHABLE |
| self.adapter_agent.update_device(device) |
| |
| # Update the child devices connect state to UNREACHABLE |
| self.adapter_agent.update_child_devices_state(device.id, |
| connect_status=ConnectStatus.UNREACHABLE) |
| |
| msg = ( |
| Ether(dst=device.mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode = Dpoe_Opcodes["Set Request"], |
| body=TibitDeviceReset())/ |
| EndOfPDU() |
| ) |
| olt_mac = device.mac_address |
| action = "Device Reset" |
| log.info('OLT-send to {} for OLT: {}'.format(action, olt_mac)) |
| self.io_port.send(str(msg)) |
| |
| # Get and process the Set Response |
| rc = [] |
| yield self._handle_set_resp(olt_mac, action, rc) |
| |
| # Change the operational status back to its previous state. |
| device.oper_status = previous_oper_status |
| device.connect_status = previous_conn_status |
| self.adapter_agent.update_device(device) |
| |
| # Update the child devices connect state to REACHABLE |
| self.adapter_agent.update_child_devices_state(device.id, |
| connect_status=ConnectStatus.REACHABLE) |
| log.info('OLT Rebooted: {}'.format(device.mac_address)) |
| |
| |
| def delete_device(self, device): |
| raise NotImplementedError() |
| |
| def get_device_details(self, device): |
| raise NotImplementedError() |
| |
| @inlineCallbacks |
| def update_flows_bulk(self, device, flows, groups): |
| log.info('########################################') |
| log.info('bulk-flow-update', device_id=device.id, |
| flows=flows, groups=groups) |
| assert len(groups.items) == 0, "Cannot yet deal with groups" |
| |
| # extract ONU VID |
| # vid_from_device_id = {v[0]: k for k,v in self.vlan_to_device_ids.iteritems()} |
| # ONU_VID = vid_from_device_id[device.id] |
| _inner_vid = None |
| olt_mac = device.mac_address |
| |
| Clause = {v: k for k, v in ClauseSubtypeEnum.iteritems()} |
| Operator = {v: k for k, v in RuleOperatorEnum.iteritems()} |
| |
| for flow in flows.items: |
| |
| try: |
| in_port = get_in_port(flow) |
| assert in_port is not None |
| |
| precedence = 255 - min(flow.priority / 256, 255) |
| |
| if in_port == 2: |
| log.info('#### Downstream Rule ####') |
| dn_req = NetworkToNetworkPortObject() |
| dn_req /= PortIngressRuleHeader(precedence=precedence) |
| |
| for field in get_ofb_fields(flow): |
| |
| if field.type == ETH_TYPE: |
| _type = field.eth_type |
| log.info('#### field.type == ETH_TYPE ####') |
| dn_req /= PortIngressRuleClauseMatchLength02( |
| fieldcode=Clause['L2 Type/Len'], |
| operator=Operator['=='], |
| match=_type) |
| |
| elif field.type == IP_PROTO: |
| _proto = field.ip_proto |
| log.info('#### field.type == IP_PROTO ####') |
| |
| elif field.type == IN_PORT: |
| _port = field.port |
| log.info('#### field.type == IN_PORT ####', port=_port) |
| |
| elif field.type == VLAN_VID: |
| _vlan_vid = field.vlan_vid & 0xfff |
| log.info('#### field.type == VLAN_VID ####', vlan=_vlan_vid) |
| _outer_vid = _vlan_vid |
| |
| elif field.type == VLAN_PCP: |
| _vlan_pcp = field.vlan_pcp |
| log.info('#### field.type == VLAN_PCP ####', pcp=_vlan_pcp) |
| |
| elif field.type == UDP_DST: |
| _udp_dst = field.udp_dst |
| log.info('#### field.type == UDP_DST ####', udp_dst=_udp_dst) |
| |
| elif field.type == UDP_SRC: |
| _udp_src = field.udp_src |
| log.info('#### field.type == UDP_SRC ####', udp_src=_udp_src) |
| |
| elif field.type == IPV4_DST: |
| _ipv4_dst = field.ipv4_dst |
| log.info('#### field.type == IPV4_DST ####', ipv4_dst=_ipv4_dst) |
| |
| elif field.type == METADATA: |
| _metadata = field.table_metadata |
| log.info('#### field.type == METADATA ####', metadata=_metadata) |
| _inner_vid = _metadata |
| |
| else: |
| raise NotImplementedError('field.type={}'.format( |
| field.type)) |
| |
| for action in get_actions(flow): |
| |
| if action.type == OUTPUT: |
| log.info('#### action.type == OUTPUT ####') |
| dn_req /= PortIngressRuleResultForward() |
| if _outer_vid == MULTICAST_VLAN: |
| dn_req /= PortIngressRuleResultOLTBroadcastQueue() |
| elif _inner_vid is not None: |
| serial = _inner_vid - 200 |
| mac_address = self.vlan_to_device_ids[_inner_vid][2].upper() |
| |
| if self.mode.upper()[0] == "G": # GPON |
| vssn = "TBIT" |
| link = int(mac_address[4:12], 16) |
| resultOltQueue = "PortIngressRuleResultOLTQueue(unicastvssn=vssn, unicastlink=link)" |
| else: # EPON |
| vssn = int(mac_address[0:8].rjust(8,"0"), 16) |
| link = int((mac_address[8:12]).ljust(8,"0"), 16) |
| resultOltQueue = "PortIngressRuleResultOLTEPONQueue(unicastvssn=vssn, unicastlink=link)" |
| |
| dn_req /= eval(resultOltQueue) |
| |
| elif _inner_vid is None: |
| log.info('#### action.type == OUTPUT INNER VID is NONE ####') |
| |
| elif action.type == POP_VLAN: |
| log.info('#### action.type == POP_VLAN ####') |
| if _outer_vid == MULTICAST_VLAN: |
| dn_req /= PortIngressRuleResultDelete(fieldcode=Clause['C-VLAN Tag']) |
| dn_req /= PortIngressRuleClauseMatchLength02(fieldcode=Clause['C-VLAN Tag'], fieldinstance=0, |
| operator=Operator['=='], match=_outer_vid) |
| else: |
| dn_req /= PortIngressRuleResultDelete(fieldcode=Clause['C-VLAN Tag']) |
| dn_req /= PortIngressRuleClauseMatchLength02(fieldcode=Clause['C-VLAN Tag'], fieldinstance=0, |
| operator=Operator['=='], match=_outer_vid) |
| dn_req /= PortIngressRuleClauseMatchLength02(fieldcode=Clause['C-VLAN Tag'], fieldinstance=1, |
| operator=Operator['=='], match=_inner_vid) |
| |
| elif action.type == PUSH_VLAN: |
| log.info('#### action.type == PUSH_VLAN ####') |
| if action.push.ethertype != 0x8100: |
| log.error('unhandled-tpid', |
| ethertype=action.push.ethertype) |
| dn_req /= PortIngressRuleResultInsert(fieldcode=Clause['C-VLAN Tag']) |
| |
| elif action.type == SET_FIELD: |
| log.info('#### action.type == SET_FIELD ####') |
| assert (action.set_field.field.oxm_class == |
| ofp.OFPXMC_OPENFLOW_BASIC) |
| field = action.set_field.field.ofb_field |
| if field.type == VLAN_VID: |
| dn_req /= PortIngressRuleResultSet( |
| fieldcode=Clause['C-VLAN Tag'], value=field.vlan_vid & 0xfff) |
| else: |
| log.error('unsupported-action-set-field-type', |
| field_type=field.type) |
| else: |
| log.error('UNSUPPORTED-ACTION-TYPE', |
| action_type=action.type) |
| |
| dn_req /= PortIngressRuleTerminator() |
| dn_req /= AddPortIngressRule() |
| |
| msg = ( |
| Ether(dst=device.mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode = Dpoe_Opcodes["Set Request"], body=dn_req)/ |
| EndOfPDU() |
| ) |
| |
| # Send OAM Request |
| action = "Set DS Rule" |
| log.info('OLT-send to {} for OLT: {}'.format(action, olt_mac)) |
| self.io_port.send(str(msg)) |
| |
| # Get and process the Set Response |
| rc = [] |
| yield self._handle_set_resp(olt_mac, action, rc) |
| |
| elif in_port == 1: |
| # Upstream rule |
| log.info('#### Upstream Rule ####') |
| |
| field_match_vlan_upstream_with_link = False |
| up_req_link = PortIngressRuleHeader(precedence=precedence) |
| |
| up_req_pon = PonPortObject() |
| up_req_pon /= PortIngressRuleHeader(precedence=precedence) |
| |
| for field in get_ofb_fields(flow): |
| |
| if field.type == ETH_TYPE: |
| _type = field.eth_type |
| log.info('#### field.type == ETH_TYPE ####', in_port=in_port, |
| match=_type) |
| up_req_pon /= PortIngressRuleClauseMatchLength02( |
| fieldcode=Clause['L2 Type/Len'], |
| operator=Operator['=='], |
| match=_type) |
| |
| up_req_link /= PortIngressRuleClauseMatchLength02( |
| fieldcode=Clause['L2 Type/Len'], |
| operator=Operator['=='], |
| match=_type) |
| |
| elif field.type == IP_PROTO: |
| _proto = field.ip_proto |
| log.info('#### field.type == IP_PROTO ####', in_port=in_port, |
| ip_proto=_proto) |
| |
| up_req_pon /= PortIngressRuleClauseMatchLength01( |
| fieldcode=Clause['IPv4/IPv6 Protocol Type'], |
| operator=Operator['=='], match=_proto) |
| |
| up_req_link /= PortIngressRuleClauseMatchLength01( |
| fieldcode=Clause['IPv4/IPv6 Protocol Type'], |
| operator=Operator['=='], match=_proto) |
| |
| elif field.type == IN_PORT: |
| _port = field.port |
| log.info('#### field.type == IN_PORT ####') |
| |
| elif field.type == VLAN_VID: |
| _vlan_vid = field.vlan_vid & 0xfff |
| log.info('#### field.type == VLAN_VID ####') |
| up_req_pon /= PortIngressRuleClauseMatchLength02( |
| fieldcode=Clause['C-VLAN Tag'], fieldinstance=0, |
| operator=Operator['=='], match=_vlan_vid) |
| |
| serial = _vlan_vid - 200 |
| mac_address = self.vlan_to_device_ids[_vlan_vid][2].upper() |
| |
| if self.mode.upper()[0] == "G": # GPON |
| vssn = "TBIT" |
| link = int(mac_address[4:12], 16) |
| logical_link = "OLTUnicastLogicalLink(unicastvssn=vssn, unicastlink=link)" |
| else: # EPON |
| vssn = int(mac_address[0:8].rjust(8,"0"), 16) |
| link = int((mac_address[8:12]).ljust(8,"0"), 16) |
| logical_link = "OLTEPONUnicastLogicalLink(unicastvssn=vssn, unicastlink=link)" |
| |
| up_req_link /= eval(logical_link) |
| |
| up_req_link /= PortIngressRuleClauseMatchLength02( |
| fieldcode=Clause['C-VLAN Tag'], fieldinstance=0, |
| operator=Operator['=='], match=_vlan_vid) |
| field_match_vlan_upstream_with_link = True |
| |
| |
| elif field.type == VLAN_PCP: |
| _vlan_pcp = field.vlan_pcp |
| log.info('#### field.type == VLAN_PCP ####') |
| |
| elif field.type == UDP_DST: |
| _udp_dst = field.udp_dst |
| log.info('#### field.type == UDP_DST ####') |
| up_req_pon /= (PortIngressRuleClauseMatchLength02(fieldcode=Clause['TCP/UDP source port'], |
| operator=Operator['=='], match=0x0044)/ |
| PortIngressRuleClauseMatchLength02(fieldcode=Clause['TCP/UDP destination port'], |
| operator=Operator['=='], match=0x0043)) |
| |
| elif field.type == UDP_SRC: |
| _udp_src = field.udp_src |
| log.info('#### field.type == UDP_SRC ####') |
| |
| else: |
| raise NotImplementedError('field.type={}'.format( |
| field.type)) |
| |
| for action in get_actions(flow): |
| |
| if action.type == OUTPUT: |
| log.info('#### action.type == OUTPUT ####') |
| up_req_pon /= PortIngressRuleResultForward() |
| up_req_link /= PortIngressRuleResultForward() |
| |
| elif action.type == POP_VLAN: |
| log.info('#### action.type == POP_VLAN ####') |
| |
| elif action.type == PUSH_VLAN: |
| log.info('#### action.type == PUSH_VLAN ####') |
| if action.push.ethertype != 0x8100: |
| log.error('unhandled-ether-type', |
| ethertype=action.push.ethertype) |
| if field_match_vlan_upstream_with_link == True: |
| up_req_link /= PortIngressRuleResultInsert(fieldcode=Clause['C-VLAN Tag'], |
| fieldinstance=1) |
| else: |
| up_req_pon /= PortIngressRuleResultInsert(fieldcode=Clause['C-VLAN Tag'], |
| fieldinstance=0) |
| |
| elif action.type == SET_FIELD: |
| log.info('#### action.type == SET_FIELD ####') |
| assert (action.set_field.field.oxm_class == |
| ofp.OFPXMC_OPENFLOW_BASIC) |
| field = action.set_field.field.ofb_field |
| if field.type == VLAN_VID: |
| if field_match_vlan_upstream_with_link == True: |
| up_req_link /=(PortIngressRuleResultCopy(fieldcode=Clause['C-VLAN Tag'])/ |
| PortIngressRuleResultReplace(fieldcode=Clause['C-VLAN Tag'])) |
| |
| up_req_pon /= PortIngressRuleResultSet( |
| fieldcode=Clause['C-VLAN Tag'], value=field.vlan_vid & 0xfff) |
| up_req_link /= PortIngressRuleResultSet( |
| fieldcode=Clause['C-VLAN Tag'], value=field.vlan_vid & 0xfff) |
| else: |
| log.error('unsupported-action-set-field-type', |
| field_type=field.type) |
| |
| else: |
| log.error('UNSUPPORTED-ACTION-TYPE', |
| action_type=action.type) |
| |
| if (field_match_vlan_upstream_with_link == True): |
| up_req = up_req_link |
| else: |
| up_req = up_req_pon |
| |
| up_req /= PortIngressRuleTerminator() |
| up_req /= AddPortIngressRule() |
| |
| msg = ( |
| Ether(dst=device.mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode = Dpoe_Opcodes["Set Request"], body=up_req)/ |
| EndOfPDU() |
| ) |
| |
| # Send OAM Request |
| action = "Set US Rule" |
| log.info('OLT-send to {} for OLT: {}'.format(action, olt_mac)) |
| self.io_port.send(str(msg)) |
| |
| # Get and process the Set Response |
| rc = [] |
| yield self._handle_set_resp(olt_mac, action, rc) |
| |
| else: |
| raise Exception('Port should be 1 or 2 by our convention') |
| |
| except Exception, e: |
| log.exception('failed-to-install-flow', e=e, flow=flow) |
| |
| def update_flows_incrementally(self, device, flow_changes, group_changes): |
| raise NotImplementedError() |
| |
| def send_proxied_message(self, proxy_address, msg): |
| log.info('send-proxied-message', proxy_address=proxy_address) |
| device = self.adapter_agent.get_device(proxy_address.device_id) |
| |
| mac_address = self.vlan_to_device_ids[proxy_address.channel_id][2].upper() |
| |
| if mac_address.startswith(TIBIT_SHORTENED_VSSN) or self.mode.upper()[0] == "E": |
| # Send straight OAM |
| frame = Ether(dst=device.mac_address) / \ |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / \ |
| Dot1Q(vlan=proxy_address.channel_id, prio=TIBIT_MGMT_PRIORITY) / \ |
| msg |
| else: |
| |
| # Can receive OMCI frames encoded as strings or as byte-arrays |
| try: |
| msgBytes = bytearray.fromhex(msg) |
| encapsulated_omci = EOAM_OmciMsg(body=msgBytes) |
| except ValueError: |
| encapsulated_omci = EOAM_OmciMsg(body=msg) |
| |
| frame = Ether(dst=device.mac_address) / \ |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / \ |
| Dot1Q(vlan=proxy_address.channel_id, prio=TIBIT_MGMT_PRIORITY) / \ |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=IEEE_OUI) / \ |
| encapsulated_omci /\ |
| EndOfPDU() |
| |
| self.io_port.send(str(frame)) |
| |
| def receive_proxied_message(self, proxy_address, msg): |
| raise NotImplementedError() |
| |
| def receive_packet_out(self, logical_device_id, egress_port_no, msg): |
| log.info('packet-out', logical_device_id=logical_device_id, |
| egress_port_no=egress_port_no, msg_len=len(msg)) |
| |
| _, logical_dev_id, _ = self.vlan_to_device_ids[egress_port_no] |
| if logical_dev_id != logical_device_id: |
| raise Exception('Internal table mismatch') |
| |
| tmp = Ether(msg) |
| |
| frame = Ether(dst=tmp.dst, src=tmp.src) / \ |
| Dot1Q(vlan=TIBIT_PACKET_OUT_VLAN) / \ |
| Dot1Q(vlan=egress_port_no) / \ |
| tmp.payload |
| |
| self.io_port.send(str(frame)) |
| |
| def receive_inter_adapter_message(self, msg): |
| raise NotImplementedError() |
| |
| def suppress_alarm(self, filter): |
| raise NotImplementedError() |
| |
| def unsuppress_alarm(self, filter): |
| raise NotImplementedError() |
| |
| def start_kpi_collection(self, device_id): |
| """ Periodic KPI metric collection from the device """ |
| import random |
| |
| # This is setup (for now) to be called from the adapter. Push |
| # architectures should be explored in the near future. |
| @inlineCallbacks |
| def _collect(device_id, prefix): |
| |
| pon_port_metrics = [] |
| pon_metrics_list = {} |
| nni_metrics = [] |
| |
| branch_leaf_pairs = [ |
| #[0xD7, 0x0201,], [0xD7, 0x0202], |
| [0xD7, 0x0204, "rx_64"], [0xD7, 0x0205, "rx_65_127"], |
| [0xD7, 0x0206, "rx_128_255"], [0xD7, 0x0207, "rx_256_511"], |
| [0xD7, 0x0208, "rx_512_1023"], [0xD7, 0x0209, "rx_1024_1518"], |
| [0xD7, 0x020A, "rx_1519_9k"], [0xD7, 0x020B, "tx_64"], |
| [0xD7, 0x020C, "tx_65_127"], [0xD7, 0x020D, "tx_128_255"], |
| [0xD7, 0x020E, "tx_256_511"], [0xD7, 0x020F, "tx_512_1023"], |
| [0xD7, 0x0210, "tx_1024_1518"], [0xD7, 0x0211, "tx_1519_9k"]] |
| |
| olt_mac = next((mac for mac, device in self.device_ids.iteritems() if device == device_id), None) |
| |
| try: |
| # Step 1: gather metrics from device |
| |
| #for each link on this OLT |
| for vlan_id in self.vlan_to_device_ids: |
| |
| log.info('link stats frame', links=self.vlan_to_device_ids[vlan_id]) |
| |
| # send out link_stats_frame |
| mac_address = self.vlan_to_device_ids[vlan_id][2].upper() |
| |
| link_stats_frame = self._make_link_stats_frame(olt_mac_address=olt_mac, onu_mac_address=mac_address) |
| |
| self.io_port.send(link_stats_frame) |
| |
| # Loop until we have a Get Response or timeout |
| ack = False |
| start_time = time.time() |
| while not ack: |
| frame = yield self.incoming_queues[olt_mac].get() |
| #TODO - Need to add proper timeout functionality |
| #if (time.time() - start_time) > TIBIT_MSG_WAIT_TIME or (frame is None): |
| # break # don't wait forever |
| |
| respType = get_oam_msg_type(log, frame) |
| |
| if (respType == RxedOamMsgTypeEnum["DPoE Get Response"]): |
| ack = True |
| else: |
| # Handle unexpected events/OMCI messages |
| check_resp(log, frame) |
| |
| if ack: |
| # Process the Get Request message |
| log.info('Received Link Stats Get Response Frame') |
| |
| for pair in branch_leaf_pairs: |
| (rc, value) = (get_value_from_msg(log, frame, pair[0], pair[1])) |
| |
| if rc: |
| log.info('Response for Branch 0x{:X} Leaf 0x{:0>4X} '.format(pair[0], pair[1])) |
| pon_port_metrics.append((pair[2],value)) |
| else: |
| log.info('Failed to get valid response for Branch 0x{:X} Leaf 0x{:0>4X} '.format(pair[0], pair[1])) |
| |
| pon_metrics_list[vlan_id] = pon_port_metrics |
| |
| #end looping on each vlan_id |
| |
| log.info('nni stats frame') |
| |
| link_stats_frame = self._make_nni_stats_frame(mac_address=olt_mac) |
| self.io_port.send(link_stats_frame) |
| |
| # Loop until we have a Get Response or timeout |
| ack = False |
| start_time = time.time() |
| while not ack: |
| frame = yield self.incoming_queues[olt_mac].get() |
| #TODO - Need to add proper timeout functionality |
| #if (time.time() - start_time) > TIBIT_MSG_WAIT_TIME or (frame is None): |
| # break # don't wait forever |
| |
| respType = get_oam_msg_type(log, frame) |
| |
| if (respType == RxedOamMsgTypeEnum["DPoE Get Response"]): |
| ack = True |
| else: |
| # Handle unexpected events/OMCI messages |
| check_resp(log, frame) |
| |
| if ack: |
| # Process the Get Response message |
| log.info('Recieved NNI Stats Get Response Frame') |
| |
| for pair in branch_leaf_pairs: |
| (rc, value) = (get_value_from_msg(log, frame, pair[0], pair[1])) |
| if rc: |
| log.info('Response for Branch 0x{:X} Leaf 0x{:0>4X} '.format(pair[0], pair[1])) |
| nni_metrics.append((pair[2],value)) |
| else: |
| log.info('Failed to get valid response for Branch 0x{:X} Leaf 0x{:0>4X} '.format(temp_pair[0], temp_pair[1])) |
| |
| #Need to replace with actual data |
| olt_metrics = dict( |
| cpu_util=20 + 5 * random.random(), |
| buffer_util=10 + 10 * random.random() |
| ) |
| |
| # Step 2: prepare the KpiEvent for submission |
| # we can time-stamp them here (or could use time derived from OLT |
| ts = arrow.utcnow().timestamp |
| prefixes = { |
| # CPU Metrics (example) |
| prefix: MetricValuePairs(metrics=olt_metrics), |
| # OLT NNI port |
| prefix + '.nni': MetricValuePairs(metrics=nni_metrics) |
| } |
| |
| for link in pon_metrics_list: |
| # PON link ports |
| prefixes[prefix + '.pon.{}'.format(link)] = MetricValuePairs(metrics=pon_metrics_list[link]) |
| |
| kpi_event = KpiEvent( |
| type=KpiEventType.slice, |
| ts=ts, |
| prefixes=prefixes |
| ) |
| |
| # Step 3: submit |
| self.adapter_agent.submit_kpis(kpi_event) |
| |
| except Exception as e: |
| log.exception('failed-to-submit-kpis', e=e) |
| |
| prefix = 'voltha.{}.{}'.format(self.name, device_id) |
| lc = LoopingCall(_collect, device_id, prefix) |
| lc.start(interval=15) # TODO make this configurable |
| |
| |
| # Methods for Get / Set Response Processing from eoam_messages |
| |
| @inlineCallbacks |
| def _handle_set_resp(self, olt_mac, action, retcode): |
| # Get and process the Set Response |
| ack = False |
| |
| # Loop until we have a set response |
| while not ack: |
| frame = yield self.incoming_queues[olt_mac].get() |
| |
| #TODO - Need to add proper timeout functionality |
| |
| respType = get_oam_msg_type(log, frame) |
| log.info('Received OAM Message 0x %s' % str(respType)) |
| |
| #Check that the message received is a Set Response |
| if (respType == RxedOamMsgTypeEnum["DPoE Set Response"]): |
| ack = True |
| else: |
| # Handle unexpected events/OMCI messages |
| check_resp(log, frame) |
| |
| # Verify Set Response |
| rc = False |
| if ack: |
| (rc,branch,leaf,status) = check_set_resp(log, frame) |
| if (rc is False): |
| log.info('Set Response had errors - Branch 0x{:X} Leaf 0x{:0>4X} {}'.format(branch, leaf, DPoEVariableResponseCodes[status])) |
| |
| if (rc is True): |
| log.info('OLT-response received for {} for OLT: {}'.format(action, olt_mac)) |
| else: |
| log.info('BAD OLT-response received for {} for OLT: {}'.format(action, olt_mac)) |
| |
| retcode.append(rc) |
| |
| @inlineCallbacks |
| def change_device_state(self, device, state=0): |
| # construct PON Admin State attribute |
| msg = ( |
| Ether(dst=device.mac_address) / |
| Dot1Q(vlan=TIBIT_MGMT_VLAN, prio=TIBIT_MGMT_PRIORITY) / |
| EOAMPayload() / EOAM_VendSpecificMsg(oui=Tibit_OUI) / |
| EOAM_TibitMsg(dpoe_opcode = Dpoe_Opcodes["Set Request"], |
| body=PonPortObject()/OltPonAdminStateSet(value=state))/ |
| EndOfPDU() |
| ) |
| olt_mac = device.mac_address |
| if state is 0: |
| stateStr = "disabled" |
| else: |
| stateStr = "enabled" |
| action = "Set PON Admin State to " + stateStr |
| log.info('OLT-send to {} for OLT: {}'.format(action, olt_mac)) |
| self.io_port.send(str(msg)) |
| |
| # Get and process the Set Response |
| rc = [] |
| yield self._handle_set_resp(olt_mac, action, rc) |