blob: 4a8453c3994585fcb035b67aa86619880bdfd526 [file] [log] [blame]
#!/bin/bash
lBlue='\033[1;34m'
green='\033[0;32m'
orange='\033[0;33m'
NC='\033[0m'
red='\033[0;31m'
yellow='\033[1;33m'
dGrey='\033[1;30m'
lGrey='\033[1;37m'
lCyan='\033[1;36m'
wd=`pwd`
# Clean up any prior executions
rm -fr .keys
rm -f ansible/hosts/cluster
rm -f ansible/host_vars/*
# Source the configuration information
. install.cfg
if [ -z "$hosts" ]; then
echo -e "${red}No hosts specifed!!${NC}"
echo -e "${red}Did you forget to update the config file ${yellow}installer.cfg${red}?${NC}"
exit
fi
if [ "$iUser" == "voltha" ]; then
echo -e "${yellow}voltha ${red}can't be used as be install user!!!${NC}"
echo -e "${red}Please delete the ${yellow}voltha ${red}user on the targets and create a different installation user${NC}"
exit
fi
# Configure barrier file sizes but only if a value was provided in the config file
if [ -v logLimit ]; then
sed -i -e "/logger_volume_size/s/.*/logger_volume_size: ${logLimit}/" ansible/group_vars/all
fi
if [ -v regLimit ]; then
sed -i -e "/registry_volume_size/s/.*/registry_volume_size: ${regLimit}/" ansible/group_vars/all
fi
if [ -v consulLimit ]; then
sed -i -e "/consul_volume_size/s/.*/consul_volume_size: ${consulLimit}/" ansible/group_vars/all
fi
# Create the key directory
mkdir .keys
# Create the host list
echo "[cluster]" > ansible/hosts/cluster
# Silence SSH and avoid prompts
rm -f ~/.ssh/config
echo "Host *" > ~/.ssh/config
echo " StrictHostKeyChecking no" >> ~/.ssh/config
echo " UserKnownHostsFile /dev/null" >> ~/.ssh/config
sudo cp ~/.ssh/config /root/.ssh/config
for i in $hosts
do
# Generate the key for the host
echo -e "${lBlue}Generating the key-pair for communication with host ${yellow}$i${NC}"
ssh-keygen -f ./$i -t rsa -N ''
mv $i .keys
# Generate the pre-configuration script
echo -e "${lBlue}Creating the pre-configuration script${NC}"
head -n +1 BashLoginTarget.sh > bash_login.sh
echo "" >> bash_login.sh
echo -n 'key="' >> bash_login.sh
sed -i -e 's/$/"/' $i.pub
cat $i.pub >> bash_login.sh
tail -n +2 BashLoginTarget.sh | grep -v "{{ key }}" >> bash_login.sh
rm $i.pub
# Copy the pre-config file to the VM
echo -e "${lBlue}Transfering pre-configuration script to ${yellow}$i${NC}"
if [ -d ".test" ]; then
echo -e "${red}Test mode set!!${lBlue} Using pre-populated ssh key for ${yellow}$i${NC}"
scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .test/$i bash_login.sh $iUser@$i:.bash_login
else
scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no bash_login.sh $iUser@$i:.bash_login
fi
rm bash_login.sh
# Run the pre-config file on the VM
echo -e "${lBlue}Running the pre-configuration script on ${yellow}$i${NC}"
if [ -d ".test" ]; then
echo -e "${red}Test mode set!!${lBlue} Using pre-populated ssh key for ${yellow}$i${NC}"
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .test/$i $iUser@$i
else
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $iUser@$i
fi
# Configure ansible and ssh for silent operation
echo -e "${lBlue}Configuring ansible${NC}"
echo $i >> ansible/hosts/cluster
echo "ansible_ssh_private_key_file: $wd/.keys/$i" > ansible/host_vars/$i
# Create the tunnel to the registry to allow pulls from localhost
echo -e "${lBlue}Creating a secure shell tunnel to the registry for ${yellow}$i${NC}"
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i -f voltha@$i -R 5000:localhost:5000 -N
done
# Add the dependent software list to the cluster variables
echo -e "${lBlue}Setting up dependent software${NC}"
# Delete any grub updates since the boot disk is almost
# guaranteed not to be the same device as the installer.
mkdir grub_updates
sudo mv deb_files/*grub* grub_updates
# Sort the packages in dependency order to get rid of scary non-errors
# that are issued by ansible.
#echo -e "${lBlue}Dependency sorting dependent software${NC}"
#./sort_packages.sh
#echo "deb_files:" >> ansible/group_vars/all
#for i in `cat sortedDebs.txt`
#do
#echo " - $i" >> ansible/group_vars/all
#done
# Make sure the ssh keys propagate to all hosts allowing passwordless logins between them
echo -e "${lBlue}Propagating ssh keys${NC}"
cp -r .keys ansible/roles/cluster-host/files
# Install python on all the 3 servers since python is required for
for i in $hosts
do
echo -e "${lBlue}Installing ${lCyan}Python${lBlue}${NC}"
scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i -r python-deb voltha@$i:.
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i voltha@$i "sudo dpkg -i /home/voltha/python-deb/*minimal*"
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i voltha@$i sudo dpkg -i -R /home/voltha/python-deb
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i voltha@$i rm -fr python-deb
done
if [ "$cluster_framework" == "kubernetes" ]; then
echo -e "${green}Deploying kubernetes${NC}"
# Remove previously created inventory if it exists
cp -rfp kubespray/inventory kubespray/inventory/voltha
# Adjust kubespray configuration
# Destination OS
sed -i -e "/bootstrap_os: none/s/.*/bootstrap_os: ubuntu/" \
kubespray/inventory/voltha/group_vars/all.yml
# Subnet used for deployed k8s services
sed -i -e "/kube_service_addresses: 10.233.0.0\/18/s/.*/kube_service_addresses: $cluster_service_subnet/" \
kubespray/inventory/voltha/group_vars/k8s-cluster.yml
# Subnet used for deployed k8s pods
sed -i -e "/kube_pods_subnet: 10.233.64.0\/18/s/.*/kube_pods_subnet: $cluster_pod_subnet/" \
kubespray/inventory/voltha/group_vars/k8s-cluster.yml
# Prevent any downloads from kubespray
sed -i -e "s/skip_downloads: false/skip_downloads: true/" \
kubespray/cluster.yml
sed -i -e "s/- { role: docker, tags: docker }/#&/" \
kubespray/cluster.yml
sed -i -e "s/skip_downloads: false/skip_downloads: true/" \
kubespray/roles/download/defaults/main.yml
sed -i -e "s/when: ansible_os_family == \"Debian\"/& and skip_downloads == \"false\" /" \
kubespray/roles/kubernetes/preinstall/tasks/main.yml
sed -i -e "s/or is_atomic)/& and skip_downloads == \"false\" /" \
kubespray/roles/kubernetes/preinstall/tasks/main.yml
# Disable swapon check
sed -i -e "s/kubelet_fail_swap_on|default(true)/kubelet_fail_swap_on|default(false)/" \
kubespray/roles/kubernetes/preinstall/tasks/verify-settings.yml
# Construct node inventory
CONFIG_FILE=kubespray/inventory/voltha/hosts.ini python3 \
kubespray/contrib/inventory_builder/inventory.py $hosts
ordered_nodes=`CONFIG_FILE=kubespray/inventory/voltha/hosts.ini python3 \
kubespray/contrib/inventory_builder/inventory.py print_ips`
# The inventory defines
sed -i -e '/\[kube-master\]/a\
node3
' kubespray/inventory/voltha/hosts.ini
echo "[k8s-master]" > ansible/hosts/k8s-master
mkdir -p kubespray/inventory/voltha/host_vars
ctr=1
for i in $ordered_nodes
do
echo -e "${lBlue}Adding SSH keys to kubespray ansible${NC}"
echo "ansible_ssh_private_key_file: $wd/.keys/$i" > kubespray/inventory/voltha/host_vars/node$ctr
if [ $ctr -eq 1 ]; then
echo $i >> ansible/hosts/k8s-master
fi
ctr=$((ctr + 1))
done
# Prepare Voltha
# ... Prepares environment and copies all required container images
# ... including the ones needed by kubespray
cp ansible/ansible.cfg .ansible.cfg
ansible-playbook -v ansible/voltha-k8s.yml -i ansible/hosts/cluster -e 'config_voltha=true'
# Deploy kubernetes
ANSIBLE_CONFIG=kubespray/ansible.cfg ansible-playbook -v -b \
--become-method=sudo --become-user root -u voltha \
-i kubespray/inventory/voltha/hosts.ini kubespray/cluster.yml
# Deploy Voltha
ansible-playbook -v ansible/voltha-k8s.yml -i ansible/hosts/k8s-master -e 'deploy_voltha=true'
else
# Legacy swarm instructions
# Create the daemon.json file for the swarm
echo "{" > daemon.json
echo -n ' "insecure-registries" : [' >> daemon.json
first=""
for i in .keys/*
do
if [ -z "$first" ]; then
echo -n '"'`basename $i`':5001"' >> daemon.json
first="not"
else
echo -n ' , "'`basename $i`':5001"' >> daemon.json
fi
done
echo "]" >> daemon.json
echo "}" >> daemon.json
unset first
# Running ansible
echo -e "${lBlue}Running ansible${NC}"
cp ansible/ansible.cfg .ansible.cfg
ansible-playbook ansible/voltha.yml -i ansible/hosts/cluster
# Now all 3 servers need to be rebooted because of software installs.
# Reboot them and wait patiently until they all come back.
# Note this destroys the registry tunnel wich is no longer needed.
hList=""
for i in $hosts
do
echo -e "${lBlue}Rebooting cluster hosts${NC}"
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -i .keys/$i voltha@$i sudo telinit 6
hList="$i $hList"
done
# Give the hosts time to shut down so that pings stop working or the
# script just falls through the next loop and the rest fails.
echo -e "${lBlue}Waiting for shutdown${NC}"
sleep 5
while [ ! -z "$hList" ];
do
# Attempt to ping the VMs on the list one by one.
echo -e "${lBlue}Waiting for hosts to reboot ${yellow}$hList${NC}"
for i in $hList
do
ping -q -c 1 $i > /dev/null 2>&1
ret=$?
if [ $ret -eq 0 ]; then
ipExpr=`echo $i | sed -e "s/\./[.]/g"`
hList=`echo $hList | sed -e "s/$ipExpr//" | sed -e "s/^ //" | sed -e "s/ $//"`
fi
done
done
# Now initialize the the docker swarm cluster with managers.
# The first server needs to be the primary swarm manager
# the other nodes are backup mangers that join the swarm.
# In the future, worker nodes will likely be added.
echo "[swarm-master]" > ansible/hosts/swarm-master
echo "[swarm-master-backup]" > ansible/hosts/swarm-master-backup
ctr=1
for i in $hosts
do
if [ $ctr -eq 1 ]; then
echo $i >> ansible/hosts/swarm-master
echo "swarm_master_addr: \"$i\"" >> ansible/group_vars/all
ctr=0
else
echo $i >> ansible/hosts/swarm-master-backup
fi
done
ansible-playbook ansible/swarm.yml -i ansible/hosts/swarm-master
ansible-playbook ansible/swarm.yml -i ansible/hosts/swarm-master-backup
ansible-playbook ansible/voltha.yml -i ansible/hosts/swarm-master
fi