blob: 6e6112153d4e1193faa4de3fdb9a386c68574aff [file] [log] [blame]
#
# Copyright 2016 the original author or authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
ifneq ($(VOLTHA_BUILD),docker)
ifeq ($(VOLTHA_BASE)_set,_set)
$(error To get started, please source the env.sh file)
endif
endif
ifeq ($(TAG),)
TAG := latest
endif
ifeq ($(TARGET_TAG),)
TARGET_TAG := latest
endif
# If no DOCKER_HOST_IP is specified grab a v4 IP address associated with
# the default gateway
ifeq ($(DOCKER_HOST_IP),)
DOCKER_HOST_IP := $(shell ifconfig $$(netstat -rn | grep -E '^(default|0.0.0.0)' | head -1 | awk '{print $$NF}') | grep inet | awk '{print $$2}' | sed -e 's/addr://g')
endif
include setup.mk
ifneq ($(http_proxy)$(https_proxy),)
# Include proxies from the environment
DOCKER_PROXY_ARGS = \
--build-arg http_proxy=$(http_proxy) \
--build-arg https_proxy=$(https_proxy) \
--build-arg ftp_proxy=$(ftp_proxy) \
--build-arg no_proxy=$(no_proxy) \
--build-arg HTTP_PROXY=$(HTTP_PROXY) \
--build-arg HTTPS_PROXY=$(HTTPS_PROXY) \
--build-arg FTP_PROXY=$(FTP_PROXY) \
--build-arg NO_PROXY=$(NO_PROXY)
endif
DOCKER_BUILD_ARGS = \
--build-arg TAG=$(TAG) \
--build-arg REGISTRY=$(REGISTRY) \
--build-arg REPOSITORY=$(REPOSITORY) \
$(DOCKER_PROXY_ARGS) $(DOCKER_CACHE_ARG) \
--rm --force-rm \
$(DOCKER_BUILD_EXTRA_ARGS)
VENVDIR := venv-$(shell uname -s | tr '[:upper:]' '[:lower:]')
DOCKER_IMAGE_LIST = \
base \
protoc \
protos \
voltha \
ofagent \
tools \
fluentd \
envoy \
go-builder \
netconf \
shovel \
dashd \
cli \
portainer \
nginx \
consul \
grafana \
onos \
unum \
ponsim \
tester \
config-push \
j2 \
test_runner
# The following list was scavanged from the compose / stack files as well as
# from the Dockerfiles. If nothing else it highlights that VOLTHA is not
# using consistent versions for some of the containers.
# grep -i "^FROM" docker/Dockerfile.* | grep -v voltha- | sed -e 's/ as .*$//g' -e 's/\${REGISTRY}//g' | awk '{print $NF}' | grep -v '^scratch' | sed '/:.*$/!s/$/:latest/g' | sort -u | sed -e 's/^/ /g' -e 's/$/ \\/g'
FETCH_BUILD_IMAGE_LIST = \
alpine:3.6 \
centos:7 \
centurylink/ca-certs:latest \
consul:0.9.2 \
debian:stretch-slim \
docker.elastic.co/logstash/logstash:5.6.0 \
fluent/fluentd:v0.12.42 \
gliderlabs/registrator:v7 \
golang:1.9.2 \
grpc/python:latest \
kamon/grafana_graphite:3.0 \
lyft/envoy:29361deae91575a1d46c7a21e913f19e75622ebe \
maven:3-jdk-8-alpine \
onosproject/onos:1.10.9 \
opennms/horizon-core-web:19.0.1-1 \
portainer/portainer:1.15.2 \
ubuntu:xenial
# find compose -type f | xargs grep image: | awk '{print $NF}' | grep -v voltha- | sed -e 's/\"//g' -e 's/\${REGISTRY}//g' -e 's/:\${.*:-/:/g' -e 's/\}//g' -e '/:.*$/!s/$/:latest/g' | sort -u | sed -e 's/^/ /g' -e 's/$/ \\/g'
FETCH_COMPOSE_IMAGE_LIST = \
consul:0.9.2 \
docker.elastic.co/elasticsearch/elasticsearch:5.6.0 \
fluent/fluentd:latest \
fluent/fluentd:v0.12.42 \
gliderlabs/registrator:latest \
kamon/grafana_graphite:latest \
marcelmaatkamp/freeradius:latest \
postgres:9.6.1 \
quay.io/coreos/etcd:v3.2.9 \
registry:2 \
tianon/true:latest \
wurstmeister/kafka:latest \
wurstmeister/zookeeper:latest
# find k8s -type f | xargs grep image: | awk '{print $NF}' | sed -e 's/\"//g' | sed '/:.*$/!s/$/:latest/g' | sort -u | sed -e 's/^/ /g' -e 's/$/ \\/g'
# Manually remove some image from this list as they don't reflect the new
# naming conventions for the VOLTHA build
FETCH_K8S_IMAGE_LIST = \
consul:0.9.2 \
quay.io/coreos/etcd-operator:v0.7.2 \
wurstmeister/kafka:1.0.0 \
zookeeper:3.4.11
FETCH_IMAGE_LIST = $(shell echo $(FETCH_BUILD_IMAGE_LIST) $(FETCH_COMPOSE_IMAGE_LIST) $(FETCH_K8S_IMAGE_LIST) | tr ' ' '\n' | sort -u)
.PHONY: $(DIRS) $(DIRS_CLEAN) $(DIRS_FLAKE8) flake8 base voltha ofagent netconf shovel onos dashd cli portainer grafana nginx consul envoy go-builder envoyd tools opennms logstash unum ponsim start stop tag push pull
# This should to be the first and default target in this Makefile
help:
@echo "Usage: make [<target>]"
@echo "where available targets are:"
@echo
@echo "build : Build the Voltha protos and docker images.\n\
If this is the first time you are building, choose \"make build\" option."
@echo "production : Build voltha for production deployment"
@echo "clean : Remove files created by the build and tests"
@echo "distclean : Remove venv directory"
@echo "fetch : Pre-fetch artifacts for subsequent local builds"
@echo "flake8 : Run specifically flake8 tests"
@echo "help : Print this help"
@echo "protoc : Build a container with protoc installed"
@echo "protos : Compile all grpc/protobuf files"
@echo "rebuild-venv : Rebuild local Python virtualenv from scratch"
@echo "venv : Build local Python virtualenv if did not exist yet"
@echo "utest : Run all unit tests"
@echo "itest : Run all integration tests"
@echo "containers : Build all the docker containers"
@echo "base : Build the base docker container used by all other dockers"
@echo "voltha : Build the voltha docker container"
@echo "ofagent : Build the ofagent docker container"
@echo "netconf : Build the netconf docker container"
@echo "shovel : Build the shovel docker container"
@echo "onos : Build the onos docker container"
@echo "dashd : Build the dashd docker container"
@echo "cli : Build the cli docker container"
@echo "portainer : Build the portainer docker container"
@echo "grafana : Build the grafana docker container"
@echo "nginx : Build the nginx docker container"
@echo "consul : Build the consul docker container"
@echo "unum : Build the unum docker container"
@echo "ponsim : Build the ponsim docker container"
@echo "j2 : Build the Jinja2 template container"
@echo "test_runner : Build a container from which tests are run"
@echo "start : Start VOLTHA on the current system"
@echo "stop : Stop VOLTHA on the current system"
@echo "tag : Tag a set of images"
@echo "push : Push the docker images to an external repository"
@echo "pull : Pull the docker images from a repository"
@echo
## New directories can be added here
DIRS:=\
voltha/northbound/openflow \
voltha/northbound/openflow/agent \
voltha/northbound/openflow/oftest
## If one directory depends on another directory that
## dependency can be expressed here
##
## For example, if the Tibit directory depended on the eoam
## directory being built first, then that can be expressed here.
## driver/tibit: eoam
# Parallel Build
$(DIRS):
@echo " MK $@"
$(Q)$(MAKE) -C $@
# Parallel Clean
DIRS_CLEAN = $(addsuffix .clean,$(DIRS))
$(DIRS_CLEAN):
@echo " CLEAN $(basename $@)"
$(Q)$(MAKE) -C $(basename $@) clean
# Parallel Flake8
DIRS_FLAKE8 = $(addsuffix .flake8,$(DIRS))
$(DIRS_FLAKE8):
@echo " FLAKE8 $(basename $@)"
-$(Q)$(MAKE) -C $(basename $@) flake8
build: protoc protos go-builder containers
production: protoc protos go-builder prod-containers
jenkins: build
jenkins-containers: base voltha ofagent netconf consul cli envoy fluentd unum j2
prod-containers: base voltha ofagent netconf shovel onos dashd cli grafana consul tools envoy fluentd unum j2
containers: base voltha ofagent netconf shovel onos tester config-push dashd cli portainer grafana nginx consul tools envoy fluentd unum ponsim j2 test_runner
base:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-base:${TAG} -f docker/Dockerfile.base .
ifneq ($(VOLTHA_BUILD),docker)
voltha: voltha-adapters
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-voltha:${TAG} -f docker/Dockerfile.voltha .
else
voltha:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-voltha:${TAG} -f docker/Dockerfile.voltha_d .
endif
voltha-adapters:
make -C voltha/adapters/asfvolt16_olt
ofagent:
ifneq ($(VOLTHA_BUILD),docker)
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-ofagent:${TAG} -f docker/Dockerfile.ofagent .
else
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-ofagent:${TAG} -f docker/Dockerfile.ofagent_d .
endif
tools:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-tools:${TAG} -f docker/Dockerfile.tools .
fluentd:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-fluentd:${TAG} -f docker/Dockerfile.fluentd .
envoy: envoyd
ifneq ($(VOLTHA_BUILD),docker)
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-envoy:${TAG} -f docker/Dockerfile.envoy .
else
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-envoy:${TAG} -f docker/Dockerfile.envoy_d .
endif
envoyd:
ifneq ($(VOLTHA_BUILD),docker)
make -C envoy
make -C envoy/go/envoyd
endif
go-builder:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-go-builder:${TAG} -f envoy/go/golang-builder/Dockerfile ./envoy/go/golang-builder
netconf:
ifneq ($(VOLTHA_BUILD),docker)
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-netconf:${TAG} -f docker/Dockerfile.netconf .
else
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-netconf:${TAG} -f docker/Dockerfile.netconf_d .
endif
netopeer:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-netopeer:${TAG} -f docker/Dockerfile.netopeer .
shovel:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-shovel:${TAG} -f docker/Dockerfile.shovel .
dashd:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-dashd:${TAG} -f docker/Dockerfile.dashd .
cli:
ifneq ($(VOLTHA_BUILD),docker)
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-cli:${TAG} -f docker/Dockerfile.cli .
else
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-cli:${TAG} -f docker/Dockerfile.cli_d .
endif
portainer:
ifneq ($(VOLTHA_BUILD),docker)
REGISTRY=${REGISTRY} REPOSITORY=${REPOSITORY} TAG=${TAG} portainer/buildPortainer.sh
else
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-portainer:${TAG} -f docker/Dockerfile.portainer_d .
endif
nginx:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-nginx:${TAG} -f docker/Dockerfile.nginx .
consul:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-consul:${TAG} -f docker/Dockerfile.consul .
grafana:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-grafana:${TAG} -f docker/Dockerfile.grafana .
onos:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-onos:${TAG} -f docker/Dockerfile.onos docker
unum:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-unum:${TAG} -f unum/Dockerfile ./unum
tester:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-tester:${TAG} -f docker/Dockerfile.tester docker
config-push:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-config-push:${TAG} -f docker/Dockerfile.configpush docker
opennms:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-opennms:${TAG} -f docker/Dockerfile.opennms .
logstash:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-logstash:${TAG} -f docker/Dockerfile.logstash .
ponsim:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-ponsim:${TAG} -f docker/Dockerfile.ponsim .
j2:
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-j2:${TAG} -f docker/Dockerfile.j2 docker
test_runner:
ifeq ($(VOLTHA_BUILD),docker)
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-test_runner:${TAG} -f docker/Dockerfile.test_runner .
endif
@MAKE_ENV := $(shell echo '$(.VARIABLES)' | awk -v RS=' ' '/^[a-zA-Z0-9]+$$/')
@SHELL_EXPORT := $(foreach v,$(MAKE_ENV),$(v)='$($(v))')
start:
$(SHELL_EXPORT) STACK_TEMPLATE=./compose/voltha-stack.yml.j2 ./scripts/run-voltha.sh start
stop:
./scripts/run-voltha.sh stop
tag: $(patsubst %,%.tag,$(DOCKER_IMAGE_LIST))
push: tag $(patsubst %,%.push,$(DOCKER_IMAGE_LIST))
pull: $(patsubst %,%.pull,$(DOCKER_IMAGE_LIST))
%.tag:
docker tag ${REGISTRY}${REPOSITORY}voltha-$(subst .tag,,$@):${TAG} ${TARGET_REGISTRY}${TARGET_REPOSITORY}voltha-$(subst .tag,,$@):${TARGET_TAG}
%.push:
docker push ${TARGET_REGISTRY}${TARGET_REPOSITORY}voltha-$(subst .push,,$@):${TARGET_TAG}
%.pull:
docker pull ${REGISTRY}${REPOSITORY}voltha-$(subst .pull,,$@):${TAG}
protoc:
ifeq ($(VOLTHA_BUILD),docker)
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-protoc:${TAG} -f docker/Dockerfile.protoc .
endif
protos:
ifneq ($(VOLTHA_BUILD),docker)
make -C voltha/protos
make -C ofagent/protos
make -C netconf/protos
else
docker build $(DOCKER_BUILD_ARGS) -t ${REGISTRY}${REPOSITORY}voltha-protos:${TAG} -f docker/Dockerfile.protos .
endif
install-protoc:
make -C voltha/protos install-protoc
clean:
find voltha -name '*.pyc' | xargs rm -f
distclean: clean
rm -rf ${VENVDIR}
fetch:
@bash -c ' \
for i in $(FETCH_IMAGE_LIST); do \
docker pull $$i; \
done'
fetch-jenkins: fetch
purge-venv:
rm -fr ${VENVDIR}
rebuild-venv: purge-venv venv
ifneq ($(VOLTHA_BUILD),docker)
venv: ${VENVDIR}/.built
else
venv:
endif
${VENVDIR}/.built:
@ virtualenv ${VENVDIR}
@ . ${VENVDIR}/bin/activate && \
pip install --upgrade pip; \
if ! pip install -r requirements.txt; \
then \
echo "On MAC OS X, if the installation failed with an error \n'<openssl/opensslv.h>': file not found,"; \
echo "see the BUILD.md file for a workaround"; \
else \
uname -s > ${VENVDIR}/.built; \
fi
ifneq ($(VOLTHA_BUILD),docker)
test: venv protos run-as-root-tests
@ echo "Executing all tests"
. ${VENVDIR}/bin/activate && \
nosetests -s tests \
--exclude-dir=./tests/itests/run_as_root/
else
test: protos test_runner run-as-root-tests
docker run \
-e VOLTHA_BUILD=docker \
-e REGISTRY=${REGISTRY} \
-e REPOSITORY=${REPOSITORY} \
-e TAG=${TAG} \
-e DOCKER_HOST_IP=${DOCKER_HOST_IP} \
--rm --net=host -v /var/run/docker.sock:/var/run/docker.sock \
${REGISTRY}${REPSOITORY}voltha-test_runner:${TAG} \
nosetests -s tests --exclude-dir=./tests/itests/run_as_root/
endif
ifneq ($(VOLTHA_BUILD),docker)
utest: venv protos
@ echo "Executing all unit tests"
. ${VENVDIR}/bin/activate && \
for d in $$(find ./tests/utests -type d|sort -nr); do echo $$d:; nosetests $$d; done
else
utest: protos test_runner
docker run \
-e VOLTHA_BUILD=docker \
-e REGISTRY=${REGISTRY} \
-e REPOSITORY=${REPOSITORY} \
-e TAG=${TAG} \
-e DOCKER_HOST_IP=${DOCKER_HOST_IP} \
--rm --net=host -v /var/run/docker.sock:/var/run/docker.sock \
${REGISTRY}${REPSOITORY}voltha-test_runner:${TAG} \
bash -c \
'for d in $$(find ./tests/utests -type d|sort -nr); do \
echo $$d:; \
nosetests $$d; \
done'
endif
ifneq ($(VOLTHA_BUILD),docker)
utest-with-coverage: venv protos
@ echo "Executing all unit tests and producing coverage results"
. ${VENVDIR}/bin/activate && \
for d in $$(find ./tests/utests -type d|sort -nr); do echo $$d:; \
nosetests --with-xcoverage --with-xunit --cover-package=voltha,common,ofagent $$d; done
else
utest-with-coverage: protos test_runner
@echo "Executing all unit tests and producing coverage results"
docker run \
-e VOLTHA_BUILD=docker \
-e REGISTRY=${REGISTRY} \
-e REPOSITORY=${REPOSITORY} \
-e TAG=${TAG} \
-e DOCKER_HOST_IP=${DOCKER_HOST_IP} \
--rm --net=host -v /var/run/docker.sock:/var/run/docker.sock \
${REGISTRY}${REPSOITORY}voltha-test_runner:${TAG} \
bash -c \
'for d in $$(find ./tests/utests -type d|sort -nr); do \
echo $$d:; \
nosetests --with-xcoverage --with-xunit --cover-package=voltha,common,ofagent $$d; \
done'
endif
ifneq ($(VOLTHA_BUILD),docker)
itest: venv run-as-root-tests
@ echo "Executing all integration tests"
. ${VENVDIR}/bin/activate && \
rm -rf /tmp/fluentd/* && \
REGISTRY=${REGISTRY} \
REPOSITORY=${REPOSITORY} \
TAG=${TAG} \
DOCKER_HOST_IP=${DOCKER_HOST_IP} \
nosetests -s \
tests/itests/docutests/build_md_test.py \
--exclude-dir=./tests/utests/ \
--exclude-dir=./tests/itests/run_as_root/
else
itest: protos test_runner
@ echo "Executing all integration tests"
docker run \
-e VOLTHA_BUILD=docker \
-e REGISTRY=${REGISTRY} \
-e REPOSITORY=${REPOSITORY} \
-e TAG=${TAG} \
-e DOCKER_HOST_IP=${DOCKER_HOST_IP} \
--rm --net=host -v /var/run/docker.sock:/var/run/docker.sock \
${REGISTRY}${REPSOITORY}voltha-test_runner:${TAG} \
nosetests -s \
tests/itests/docutests/build_md_test.py \
--exclude-dir=./tests/utests/ \
--exclude-dir=./tests/itests/run_as_root/
endif
ifneq ($(VOLTHA_BUILD),docker)
smoke-test: venv run-as-root-tests
@ echo "Executing smoke tests"
. ${VENVDIR}/bin/activate && \
rm -rf /tmp/fluentd/* && \
REGISTRY=${REGISTRY} \
REPOSITORY=${REPOSITORY} \
TAG=${TAG} \
DOCKER_HOST_IP=${DOCKER_HOST_IP} \
nosetests -s \
tests/itests/docutests/build_md_test.py:BuildMdTests.test_07_start_all_containers \
--exclude-dir=./tests/itests/run_as_root/
else
smoke-test: protos test_runner run-as-root-tests
@ echo "Executing smoke tests"
docker run \
-e VOLTHA_BUILD=docker \
-e REGISTRY=${REGISTRY} \
-e REPOSITORY=${REPOSITORY} \
-e TAG=${TAG} \
-e DOCKER_HOST_IP=${DOCKER_HOST_IP} \
--rm --net=host -v /var/run/docker.sock:/var/run/docker.sock \
${REGISTRY}${REPSOITORY}voltha-test_runner:${TAG} \
nosetests -s \
tests/itests/docutests/build_md_test.py:BuildMdTests.test_07_start_all_containers \
--exclude-dir=./tests/itests/run_as_root/
endif
ifneq ($(VOLTHA_BUILD),docker)
jenkins-test: venv
@ echo "Executing jenkins smoke tests"
. ${VENVDIR}/bin/activate && \
rm -rf /tmp/fluentd/* && \
REGISTRY=${REGISTRY} \
REPOSITORY=${REPOSITORY} \
TAG=${TAG} \
DOCKER_HOST_IP=${DOCKER_HOST_IP} \
nosetests -s \
tests/itests/docutests/build_md_test.py:BuildMdTests.test_07_start_all_containers \
--exclude-dir=./tests/itests/run_as_root/
else
jenkins-test: protos test_runner
@ echo "Executing jenkins smoke tests"
@ echo "Starting VOLTHA as docker-compose services"
docker run \
-e REGISTRY=${REGISTRY} \
-e REPOSITORY=${REPOSITORY} \
-e TAG=${TAG} \
-e DOCKER_HOST_IP=${DOCKER_HOST_IP} \
--rm --net=host -v /var/run/docker.sock:/var/run/docker.sock \
${REGISTRY}${REPSOITORY}voltha-test_runner:${TAG} \
nosetests -s \
tests/itests/docutests/build_md_test.py:BuildMdTests.test_07_start_all_containers \
--exclude-dir=./tests/itests/run_as_root/
endif
ifneq ($(VOLTHA_BUILD),docker)
run-as-root-tests:
docker run -i --rm -v /cord/incubator/voltha:/voltha --privileged ${REGISTRY}${REPOSITORY}voltha-base:${TAG} env PYTHONPATH=/voltha python /voltha/tests/itests/run_as_root/test_frameio.py
else
run-as-root-tests:
docker run \
-e VOLTHA_BUILD=docker \
-e REGISTRY=${REGISTRY} \
-e REPOSITORY=${REPOSITORY} \
-e TAG=${TAG} \
-e DOCKER_HOST_IP=${DOCKER_HOST_IP} \
--rm --privileged \
${REGISTRY}${REPOSITORY}voltha-test_runner:${TAG} \
env PYTHONPATH=/work python tests/itests/run_as_root/test_frameio.py
endif
flake8: $(DIRS_FLAKE8)
# end file