| # |
| # Copyright 2018 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| vOLT-HA Test Case Utils module |
| """ |
| import time |
| import commands |
| import subprocess |
| import pexpect |
| import sys |
| |
| |
| def config_dirs(self, log_dir, root_dir=None, voltha_dir=None): |
| self.dirs['log'] = log_dir |
| self.dirs['root'] = root_dir |
| self.dirs['voltha'] = voltha_dir |
| |
| |
| def get_dir(self, directory): |
| return self.dirs.get(directory) |
| |
| |
| def remove_leading_line(log_dir, log_file): |
| with open(log_dir + '/' + log_file, 'r+') as FILE: |
| lines = FILE.readlines() |
| FILE.seek(0) |
| lines = lines[1:] |
| for line in lines: |
| FILE.write(line) |
| FILE.truncate() |
| FILE.close() |
| |
| |
| def send_command_to_voltha_cli(log_dir, log_file1, cmd1, log_file2=None, cmd2=None, log_file3=None, cmd3=None, host='localhost'): |
| output = open(log_dir + '/' + log_file1, 'w') |
| child = pexpect.spawn('ssh -p 30110 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no voltha@%s' % host) |
| child.expect('[pP]assword:') |
| child.sendline('admin') |
| child.expect('\((\\x1b\[\d*;?\d+m){1,2}voltha(\\x1b\[\d*;?\d+m){1,2}\)') |
| time.sleep(10) |
| child.sendline(cmd1) |
| i = child.expect(['\((\\x1b\[\d*;?\d+m){1,2}voltha(\\x1b\[\d*;?\d+m){1,2}\)', |
| '\((\\x1b\[\d*;?\d+m){1,2}.*device [0-9a-f]{16}(\\x1b\[\d*;?\d+m){1,2}\)']) |
| if i == 0: |
| output.write(child.before) |
| output.close() |
| remove_leading_line(log_dir, log_file1) |
| elif i == 1: |
| if log_file2 is not None and cmd2 is not None: |
| output = open(log_dir + '/' + log_file2, 'w') |
| child.sendline(cmd2) |
| child.expect('\((\\x1b\[\d*;?\d+m){1,2}.*device [0-9a-f]{16}(\\x1b\[\d*;?\d+m){1,2}\)') |
| output.write(child.before) |
| output.close() |
| remove_leading_line(log_dir, log_file2) |
| if log_file3 is not None and cmd3 is not None: |
| output = open(log_dir + '/' + log_file3, 'w') |
| child.sendline(cmd3) |
| child.expect('\((\\x1b\[\d*;?\d+m){1,2}.*device [0-9a-f]{16}(\\x1b\[\d*;?\d+m){1,2}\)') |
| output.write(child.before) |
| output.close() |
| remove_leading_line(log_dir, log_file3) |
| child.close() |
| |
| |
| def send_command_to_onos_cli(log_dir, log_file, cmd, host='localhost'): |
| output = open(log_dir + '/' + log_file, 'w') |
| child = pexpect.spawn('ssh -p 30115 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no karaf@%s' % host) |
| child.expect('[pP]assword:') |
| child.sendline('karaf') |
| child.expect('(\\x1b\[\d*;?\d+m){1,2}onos> (\\x1b\[\d*;?\d+m){1,2}') |
| child.sendline(cmd) |
| child.expect('(\\x1b\[\d*;?\d+m){1,2}onos> (\\x1b\[\d*;?\d+m){1,2}') |
| |
| output.write(child.before) |
| |
| output.close() |
| child.close() |
| |
| |
| def get_fields_from_grep_command(self, search_word, log_file): |
| grepCommand =\ |
| "grep %s %s/%s" % (search_word, get_dir(self, 'log'), log_file) |
| statusLines = commands.getstatusoutput(grepCommand)[1] |
| return statusLines |
| |
| |
| def parse_fields(status_line, delimiter): |
| statusList = status_line.split(delimiter) |
| return statusList |
| |
| |
| def print_log_file(self, log_file): |
| with open(get_dir(self, 'log') + '/' + log_file, 'r+') as FILE: |
| lines = FILE.readlines() |
| print |
| for line in lines: |
| sys.stdout.write(line) |
| |
| |
| def extract_pod_ip_addr(pod_name): |
| proc1 = subprocess.Popen(['/usr/bin/kubectl', 'get', 'svc', '--all-namespaces'], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| proc2 = subprocess.Popen(['grep', '-e', pod_name], stdin=proc1.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| proc3 = subprocess.Popen(['awk', "{print $4}"], stdin=proc2.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| |
| proc1.stdout.close() |
| proc2.stdout.close() |
| out, err = proc3.communicate() |
| return out |
| |
| |
| def extract_radius_ip_addr(pod_name): |
| proc1 = subprocess.Popen(['/usr/bin/kubectl', 'describe', 'pod', '-n', 'voltha', pod_name], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| proc2 = subprocess.Popen(['grep', '^IP:'], stdin=proc1.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| proc3 = subprocess.Popen(['awk', "{print $2}"], stdin=proc2.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| |
| proc1.stdout.close() |
| proc2.stdout.close() |
| out, err = proc3.communicate() |
| return out |
| |
| |
| def extract_pod_name(short_pod_name): |
| proc1 = subprocess.Popen(['/usr/bin/kubectl', 'get', 'pods', '--all-namespaces'], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| proc2 = subprocess.Popen(['grep', '-e', short_pod_name], stdin=proc1.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| proc3 = subprocess.Popen(['awk', "{print $2}"], stdin=proc2.stdout, |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE) |
| |
| proc1.stdout.close() |
| proc2.stdout.close() |
| out, err = proc3.communicate() |
| return out |
| |
| |
| def modify_radius_ip_in_json_using_sed(self, new_ip_addr): |
| sedCommand = "sed -i '/radiusIp/c\ \"radiusIp\":\"'%s'\",' %s/tests/atests/build/aaa_json" \ |
| % (new_ip_addr, get_dir(self, 'voltha')) |
| status = commands.getstatusoutput(sedCommand)[0] |
| return status |
| |
| |
| def discover_rg_pod_name(): |
| return extract_pod_name('rg0').strip() |
| |
| |
| def retrieve_authorized_users_device_id_and_port_number(status_line): |
| fields = parse_fields(status_line, ',') |
| deviceField = fields[2].strip() |
| deviceStr, equal, deviceId = deviceField.partition('=') |
| device_Id = deviceId |
| portField = fields[4].strip() |
| portNumStr, equal, portNum = portField.partition('=') |
| portNumber = portNum |
| return device_Id, portNumber |
| |
| |
| def add_subscriber_access(self, device_id, port_number): |
| send_command_to_onos_cli(get_dir(self, 'log'), |
| 'voltha_add_subscriber_access.log', 'volt-add-subscriber-access %s %s' |
| % (device_id, port_number)) |