| # |
| # Copyright 2016 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| """ |
| Simple PON Simulator which would not be needed if openvswitch could do |
| 802.1ad (QinQ), which it cannot (the reason is beyond me), or if CPQD could |
| handle 0-tagged packets (no comment). |
| """ |
| import structlog |
| from scapy.layers.inet import IP, UDP |
| from scapy.layers.l2 import Ether, Dot1Q |
| from scapy.packet import Packet |
| |
| from voltha.protos import third_party |
| from voltha.protos.ponsim_pb2 import PonSimMetrics, PonSimPortMetrics, \ |
| PonSimPacketCounter |
| from voltha.core.flow_decomposer import * |
| from twisted.internet.task import LoopingCall |
| |
| _ = third_party |
| |
| |
| def ipv4int2str(ipv4int): |
| return '{}.{}.{}.{}'.format( |
| (ipv4int >> 24) & 0xff, |
| (ipv4int >> 16) & 0xff, |
| (ipv4int >> 8) & 0xff, |
| ipv4int & 0xff |
| ) |
| |
| |
| class _FlowMatchMask(object): |
| """ |
| Enum of mask values based on flow match priority. For instance, a port |
| match has higher priority when match that a UDP match. |
| """ |
| UDP_DST = 1 |
| UDP_SRC = 2 |
| IPV4_DST = 4 |
| VLAN_PCP = 8 |
| VLAN_VID = 16 |
| IP_PROTO = 34 |
| ETH_TYPE = 64 |
| IN_PORT = 128 |
| |
| |
| class FrameIOCounter(object): |
| class SingleFrameCounter(object): |
| def __init__(self, name, min, max): |
| # Currently there are 2 values, one for the PON interface (port 1) |
| # and one for the Network Interface (port 2). This can be extended if |
| # the virtual devices extend the number of ports. |
| self.value = [0, 0] # {PON,NI} |
| self.name = name |
| self.min = min |
| self.max = max |
| |
| def __init__(self, device): |
| self.device = device |
| self.tx_counters = dict( |
| tx_64=self.SingleFrameCounter("tx_64", 1, 64), |
| tx_65_127=self.SingleFrameCounter("tx_65_127", 65, 127), |
| tx_128_255=self.SingleFrameCounter("tx_128_255", 128, 255), |
| tx_256_511=self.SingleFrameCounter("tx_256_511", 256, 511), |
| tx_512_1023=self.SingleFrameCounter("tx_512_1023", 512, 1024), |
| tx_1024_1518=self.SingleFrameCounter("tx_1024_1518", 1024, 1518), |
| tx_1519_9k=self.SingleFrameCounter("tx_1519_9k", 1519, 9216), |
| ) |
| self.rx_counters = dict( |
| rx_64=self.SingleFrameCounter("rx_64", 1, 64), |
| rx_65_127=self.SingleFrameCounter("rx_65_127", 65, 127), |
| rx_128_255=self.SingleFrameCounter("rx_128_255", 128, 255), |
| rx_256_511=self.SingleFrameCounter("rx_256_511", 256, 511), |
| rx_512_1023=self.SingleFrameCounter("rx_512_1023", 512, 1024), |
| rx_1024_1518=self.SingleFrameCounter("rx_1024_1518", 1024, 1518), |
| rx_1519_9k=self.SingleFrameCounter("rx_1519_9k", 1519, 9216) |
| ) |
| |
| def count_rx_frame(self, port, size): |
| log.info("counting-rx-frame", size=size, port=port) |
| for k, v in self.rx_counters.iteritems(): |
| if size >= v.min and size <= v.max: |
| self.rx_counters[k].value[port - 1] += 1 |
| return |
| log.warn("unsupported-packet-size", size=size) |
| |
| def count_tx_frame(self, port, size): |
| for k, v in self.tx_counters.iteritems(): |
| if size >= v.min and size <= v.max: |
| self.tx_counters[k].value[port - 1] += 1 |
| return |
| log.warn("unsupported-packet-size", size=size) |
| |
| def log_counts(self): |
| rx_ct_list = [(v.name, v.value[0], v.value[1]) for v in |
| self.rx_counters.values()] |
| tx_ct_list = [(v.name, v.value[0], v.value[1]) for v in |
| self.tx_counters.values()] |
| log.info("rx-counts", rx_ct_list=rx_ct_list) |
| log.info("tx-counts", tx_ct_list=tx_ct_list) |
| |
| def make_proto(self): |
| sim_metrics = PonSimMetrics( |
| device=self.device |
| ) |
| pon_port_metrics = PonSimPortMetrics( |
| port_name="pon" |
| ) |
| ni_port_metrics = PonSimPortMetrics( |
| port_name="nni" |
| ) |
| for c in sorted(self.rx_counters): |
| ctr = self.rx_counters[c] |
| pon_port_metrics.packets.extend([ |
| PonSimPacketCounter(name=ctr.name, value=ctr.value[0]) |
| ]) |
| # Since they're identical keys, save some time and cheat |
| ni_port_metrics.packets.extend([ |
| PonSimPacketCounter(name=ctr.name, value=ctr.value[1]) |
| ]) |
| |
| for c in sorted(self.tx_counters): |
| ctr = self.tx_counters[c] |
| pon_port_metrics.packets.extend([ |
| PonSimPacketCounter(name=ctr.name, value=ctr.value[0]) |
| ]) |
| # Since they're identical keys, save some time and cheat |
| ni_port_metrics.packets.extend([ |
| PonSimPacketCounter(name=ctr.name, value=ctr.value[1]) |
| ]) |
| sim_metrics.metrics.extend([pon_port_metrics]) |
| sim_metrics.metrics.extend([ni_port_metrics]) |
| |
| return sim_metrics |
| |
| |
| class SimDevice(object): |
| def __init__(self, name, logical_port_no): |
| self.name = name |
| self.logical_port_no = logical_port_no |
| self.links = dict() |
| self.flows = list() |
| self.log = structlog.get_logger(name=name, |
| logical_port_no=logical_port_no) |
| self.counter = FrameIOCounter(name) |
| |
| def link(self, port, egress_fun): |
| self.links.setdefault(port, []).append(egress_fun) |
| |
| def ingress(self, port, frame): |
| self.log.debug('ingress', ingress_port=port, name=self.name) |
| self.counter.count_rx_frame(port, len(frame["Ether"].payload)) |
| outcome = self.process_frame(port, frame) |
| if outcome is not None: |
| egress_port, egress_frame = outcome |
| forwarded = 0 |
| links = self.links.get(egress_port) |
| if links is not None: |
| self.counter.count_tx_frame(egress_port, |
| len(egress_frame["Ether"].payload)) |
| for fun in links: |
| forwarded += 1 |
| self.log.debug('forwarding', egress_port=egress_port) |
| fun(egress_port, egress_frame) |
| if not forwarded: |
| self.log.debug('no-one-to-forward-to', egress_port=egress_port) |
| else: |
| self.log.debug('dropped') |
| |
| def install_flows(self, flows): |
| # store flows in precedence order so we can roll down on frame arrival |
| self.flows = sorted(flows, key=lambda fm: fm.priority, reverse=True) |
| |
| def process_frame(self, ingress_port, ingress_frame): |
| matched_mask = 0 |
| matched_flow = None |
| for flow in self.flows: |
| current_mask = self.is_match(flow, ingress_port, ingress_frame) |
| if current_mask > matched_mask: |
| matched_mask = current_mask |
| matched_flow = flow |
| |
| if matched_flow: |
| egress_port, egress_frame = self.process_actions( |
| matched_flow, ingress_frame) |
| return egress_port, egress_frame |
| return None |
| |
| @staticmethod |
| def is_match(flow, ingress_port, frame): |
| matched_mask = 0 |
| |
| def get_non_shim_ether_type(f): |
| if f.haslayer(Dot1Q): |
| f = f.getlayer(Dot1Q) |
| return f.type |
| |
| def get_vlan_pcp(f): |
| if f.haslayer(Dot1Q): |
| return f.getlayer(Dot1Q).prio |
| |
| def get_ip_proto(f): |
| if f.haslayer(IP): |
| return f.getlayer(IP).proto |
| |
| def get_ipv4_dst(f): |
| if f.haslayer(IP): |
| return f.getlayer(IP).dst |
| |
| def get_udp_src(f): |
| if f.haslayer(UDP): |
| return f.getlayer(UDP).sport |
| |
| def get_udp_dst(f): |
| if f.haslayer(UDP): |
| return f.getlayer(UDP).dport |
| |
| for field in get_ofb_fields(flow): |
| |
| if field.type == IN_PORT: |
| if field.port != ingress_port: |
| return 0 |
| matched_mask |= _FlowMatchMask.IN_PORT |
| |
| elif field.type == ETH_TYPE: |
| if field.eth_type != get_non_shim_ether_type(frame): |
| return 0 |
| matched_mask |= _FlowMatchMask.ETH_TYPE |
| |
| elif field.type == IP_PROTO: |
| if field.ip_proto != get_ip_proto(frame): |
| return 0 |
| matched_mask |= _FlowMatchMask.IP_PROTO |
| |
| elif field.type == VLAN_VID: |
| expected_vlan = field.vlan_vid |
| tagged = frame.haslayer(Dot1Q) |
| if bool(expected_vlan & 4096) != bool(tagged): |
| return 0 |
| if tagged: |
| actual_vid = frame.getlayer(Dot1Q).vlan |
| if actual_vid != expected_vlan & 4095: |
| return 0 |
| matched_mask |= _FlowMatchMask.VLAN_VID |
| |
| elif field.type == VLAN_PCP: |
| if field.vlan_pcp != get_vlan_pcp(frame): |
| return 0 |
| matched_mask |= _FlowMatchMask.VLAN_PCP |
| |
| elif field.type == IPV4_DST: |
| if ipv4int2str(field.ipv4_dst) != get_ipv4_dst(frame): |
| return 0 |
| matched_mask |= _FlowMatchMask.IPV4_DST |
| |
| elif field.type == UDP_SRC: |
| if field.udp_src != get_udp_src(frame): |
| return 0 |
| matched_mask |= _FlowMatchMask.UDP_SRC |
| |
| elif field.type == UDP_DST: |
| if field.udp_dst != get_udp_dst(frame): |
| return 0 |
| matched_mask |= _FlowMatchMask.UDP_DST |
| |
| elif field.type == METADATA: |
| pass # safe to ignore |
| |
| else: |
| raise NotImplementedError('field.type=%d' % field.type) |
| |
| return matched_mask |
| |
| @staticmethod |
| def process_actions(flow, frame): |
| egress_port = None |
| for action in get_actions(flow): |
| |
| if action.type == OUTPUT: |
| egress_port = action.output.port |
| |
| elif action.type == POP_VLAN: |
| if frame.haslayer(Dot1Q): |
| shim = frame.getlayer(Dot1Q) |
| frame = Ether( |
| src=frame.src, |
| dst=frame.dst, |
| type=shim.type) / shim.payload |
| |
| elif action.type == PUSH_VLAN: |
| frame = ( |
| Ether(src=frame.src, dst=frame.dst, |
| type=action.push.ethertype) / |
| Dot1Q(type=frame.type) / |
| frame.payload |
| ) |
| |
| elif action.type == SET_FIELD: |
| assert (action.set_field.field.oxm_class == |
| ofp.OFPXMC_OPENFLOW_BASIC) |
| field = action.set_field.field.ofb_field |
| |
| if field.type == VLAN_VID: |
| shim = frame.getlayer(Dot1Q) |
| shim.vlan = field.vlan_vid & 4095 |
| |
| elif field.type == VLAN_PCP: |
| shim = frame.getlayer(Dot1Q) |
| shim.prio = field.vlan_pcp |
| |
| else: |
| raise NotImplementedError('set_field.field.type=%d' |
| % field.type) |
| |
| else: |
| raise NotImplementedError('action.type=%d' % action.type) |
| |
| return egress_port, frame |
| |
| |
| class PonSim(object): |
| def __init__(self, onus, egress_fun): |
| self.egress_fun = egress_fun |
| |
| self.log = structlog.get_logger() |
| # Create OLT and hook NNI port up for egress |
| self.olt = SimDevice('olt', 0) |
| self.olt.link(2, lambda _, frame: self.egress_fun(0, frame)) |
| self.devices = dict() |
| self.devices[0] = self.olt |
| # TODO: This can be removed, it's for debugging purposes |
| self.lc = LoopingCall(self.olt.counter.log_counts) |
| self.lc.start(90) # To correlate with Kafka |
| |
| # Create ONUs of the requested number and hook them up with OLT |
| # and with egress fun |
| def mk_egress_fun(port_no): |
| return lambda _, frame: self.egress_fun(port_no, frame) |
| |
| def mk_onu_ingress(onu): |
| return lambda _, frame: onu.ingress(1, frame) |
| |
| for i in range(onus): |
| port_no = 128 + i |
| onu = SimDevice('onu%d' % i, port_no) |
| onu.link(1, lambda _, frame: self.olt.ingress(1, |
| frame)) # Send to the OLT |
| onu.link(2, |
| mk_egress_fun(port_no)) # Send from the ONU to the world |
| self.olt.link(1, mk_onu_ingress(onu)) # Internal send to the ONU |
| self.devices[port_no] = onu |
| for d in self.devices: |
| self.log.info("pon-sim-init", port=d, name=self.devices[d].name, |
| links=self.devices[d].links) |
| |
| def get_ports(self): |
| return sorted(self.devices.keys()) |
| |
| def get_stats(self): |
| return self.olt.counter.make_proto() |
| |
| def olt_install_flows(self, flows): |
| self.olt.install_flows(flows) |
| |
| def onu_install_flows(self, onu_port, flows): |
| self.devices[onu_port].install_flows(flows) |
| |
| def ingress(self, port, frame): |
| if not isinstance(frame, Packet): |
| frame = Ether(frame) |
| self.devices[port].ingress(2, frame) |