| # |
| # Copyright 2018 the original author or authors. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| from twisted.internet import reactor |
| from twisted.internet.defer import inlineCallbacks, failure |
| from voltha.extensions.omci.omci_me import * |
| from voltha.extensions.omci.tasks.task import Task |
| from voltha.extensions.omci.omci_defs import * |
| from voltha.adapters.adtran_onu.flow.flow_entry import FlowEntry |
| from voltha.adapters.adtran_onu.omci.omci import OMCI |
| |
| OP = EntityOperations |
| RC = ReasonCodes |
| |
| |
| class ServiceRemovalFailure(Exception): |
| """ |
| This error is raised by default when the flow-install fails |
| """ |
| |
| |
| class AdtnRemoveFlowTask(Task): |
| """ |
| OpenOMCI MIB Flow Remove Task |
| |
| Currently, the only service tech profiles expected by v2.0 will be for AT&T |
| residential data service and DT residential data service. |
| """ |
| task_priority = Task.DEFAULT_PRIORITY + 10 |
| default_tpid = 0x8100 # TODO: Locate to a better location |
| |
| name = "ADTRAN MIB Install Flow Task" |
| |
| def __init__(self, omci_agent, handler, flow_entry): |
| """ |
| Class initialization |
| |
| :param omci_agent: (OpenOMCIAgent) OMCI Adapter agent |
| :param handler: (AdtranOnuHandler) ONU Handler |
| :param flow_entry: (FlowEntry) Flow to install |
| """ |
| super(AdtnRemoveFlowTask, self).__init__(AdtnRemoveFlowTask.name, |
| omci_agent, |
| handler.device_id, |
| priority=AdtnRemoveFlowTask.task_priority, |
| exclusive=False) |
| self._handler = handler |
| self._onu_device = omci_agent.get_device(handler.device_id) |
| self._local_deferred = None |
| self._flow_entry = flow_entry |
| |
| # TODO: Cleanup below that is not needed |
| # self._vlan_tcis_1 = 0x900 |
| # self._input_tpid = AdtnRemoveFlowTask.default_tpid |
| # self._output_tpid = AdtnRemoveFlowTask.default_tpid |
| |
| is_upstream = flow_entry.flow_direction in FlowEntry.upstream_flow_types |
| # uni_port = flow_entry.in_port if is_upstream else flow_entry.out_port |
| pon_port = flow_entry.out_port if is_upstream else flow_entry.in_port |
| |
| # self._uni = handler.uni_port(uni_port) |
| self._pon = handler.pon_port(pon_port) |
| |
| self._vid = OMCI.DEFAULT_UNTAGGED_VLAN |
| |
| # Entity IDs. IDs with values can probably be most anything for most ONUs, |
| # IDs set to None are discovered/set |
| # |
| # TODO: Probably need to store many of these in the appropriate object (UNI, PON,...) |
| # |
| self._ieee_mapper_service_profile_entity_id = self._pon.hsi_8021p_mapper_entity_id |
| self._mac_bridge_port_ani_entity_id = self._pon.hsi_mac_bridge_port_ani_entity_id |
| |
| # Next to are specific |
| self._mac_bridge_service_profile_entity_id = handler.mac_bridge_service_profile_entity_id |
| |
| def cancel_deferred(self): |
| super(AdtnRemoveFlowTask, self).cancel_deferred() |
| |
| d, self._local_deferred = self._local_deferred, None |
| try: |
| if d is not None and not d.called: |
| d.cancel() |
| except: |
| pass |
| |
| def start(self): |
| """ |
| Start the flow installation |
| """ |
| super(AdtnRemoveFlowTask, self).start() |
| self._local_deferred = reactor.callLater(0, self.perform_flow_removal) |
| |
| def stop(self): |
| """ |
| Shutdown flow install task |
| """ |
| self.log.debug('stopping') |
| |
| self.cancel_deferred() |
| super(AdtnRemoveFlowTask, self).stop() |
| |
| def check_status_and_state(self, results, operation=''): |
| """ |
| Check the results of an OMCI response. An exception is thrown |
| if the task was cancelled or an error was detected. |
| |
| :param results: (OmciFrame) OMCI Response frame |
| :param operation: (str) what operation was being performed |
| :return: True if successful, False if the entity existed (already created) |
| """ |
| omci_msg = results.fields['omci_message'].fields |
| status = omci_msg['success_code'] |
| error_mask = omci_msg.get('parameter_error_attributes_mask', 'n/a') |
| failed_mask = omci_msg.get('failed_attributes_mask', 'n/a') |
| unsupported_mask = omci_msg.get('unsupported_attributes_mask', 'n/a') |
| |
| self.log.debug(operation, status=status, error_mask=error_mask, |
| failed_mask=failed_mask, unsupported_mask=unsupported_mask) |
| |
| if status == RC.Success: |
| self.strobe_watchdog() |
| return True |
| |
| elif status == RC.InstanceExists: |
| return False |
| |
| raise ServiceRemovalFailure( |
| '{} failed with a status of {}, error_mask: {}, failed_mask: {}, unsupported_mask: {}' |
| .format(operation, status, error_mask, failed_mask, unsupported_mask)) |
| |
| @inlineCallbacks |
| def perform_flow_removal(self): |
| """ |
| Send the commands to configure the flow |
| """ |
| self.log.info('perform-flow-removall') |
| |
| def resources_available(): |
| return (len(self._handler.uni_ports) > 0 and |
| len(self._pon.tconts) and |
| len(self._pon.gem_ports)) |
| |
| if self._handler.enabled and resources_available(): |
| omci = self._onu_device.omci_cc |
| try: |
| # TODO: make this a member of the onu gem port or the uni port |
| set_vlan_vid = self._flow_entry.set_vlan_vid |
| |
| # # Delete bridge ani side vlan filter |
| # msg = VlanTaggingFilterDataFrame(self._mac_bridge_port_ani_entity_id) |
| # frame = msg.delete() |
| # |
| # results = yield omci.send(frame) |
| # self.check_status_and_state(results, 'flow-delete-vlan-tagging-filter-data') |
| # |
| # # Re-Create bridge ani side vlan filter |
| # msg = VlanTaggingFilterDataFrame( |
| # self._mac_bridge_port_ani_entity_id, # Entity ID |
| # vlan_tcis=[self._vlan_tcis_1], # VLAN IDs |
| # forward_operation=0x10 |
| # ) |
| # frame = msg.create() |
| # results = yield omci.send(frame) |
| # self.check_status_and_state(results, 'flow-create-vlan-tagging-filter-data') |
| |
| # Update uni side extended vlan filter |
| attributes = dict( |
| received_frame_vlan_tagging_operation_table= |
| VlanTaggingOperation( |
| filter_outer_priority=15, # This entry is not a double-tag rule |
| filter_outer_vid=4096, # Do not filter on the outer VID value |
| filter_outer_tpid_de=0, # Do not filter on the outer TPID field |
| |
| filter_inner_priority=15, # This is a no-tag rule, ignore all other VLAN tag filter fields |
| filter_inner_vid=0x1000, # Do not filter on the inner VID |
| filter_inner_tpid_de=0, # Do not filter on inner TPID field |
| |
| filter_ether_type=0, # Do not filter on EtherType |
| treatment_tags_to_remove=0, # Remove 0 tags |
| |
| treatment_outer_priority=15, # Do not add an outer tag |
| treatment_outer_vid=0, # n/a |
| treatment_outer_tpid_de=0, # n/a |
| |
| treatment_inner_priority=0, # Add an inner tag and insert this value as the priority |
| treatment_inner_vid=self._vid, # use this value as the VID in the inner VLAN tag |
| treatment_inner_tpid_de=4, # set TPID |
| ) |
| ) |
| msg = ExtendedVlanTaggingOperationConfigurationDataFrame( |
| self._mac_bridge_service_profile_entity_id, # Bridge Entity ID |
| attributes=attributes # See above |
| ) |
| frame = msg.set() |
| results = yield omci.send(frame) |
| self.check_status_and_state(results, |
| 'flow-set-ext-vlan-tagging-op-config-data-untagged') |
| |
| self.deferred.callback('flow-remove-success') |
| |
| except Exception as e: |
| # TODO: Better context info for this exception output... |
| self.log.exception('failed-to-remove-flow', e=e) |
| self.deferred.errback(failure.Failure(e)) |
| |
| else: |
| # TODO: Provide better error reason, what was missing... |
| e = ServiceRemovalFailure('Required resources are not available') |
| self.deferred.errback(failure.Failure(e)) |